CheckpointLock was removed in commit d18e75664a, and commit ce197e91d0
updated a leftover comment in CreateCheckPoint, but there was another
copy of it in CreateRestartPoint still.
Buildfarm shows that this test has a further failure mode when a
checkpoint starts earlier than expected, so we detect a "checkpoint
completed" line that's not the one we want. Change the config to try
and prevent this.
Per buildfarm
While at it, update one comment that was forgotten in commit
d18e75664a2f.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20210729.162038.534808353849568395.horikyota.ntt@gmail.com
When some slots are invalidated due to the max_slot_wal_keep_size limit,
the old segment horizon should move forward to stay within the limit.
However, in commit c6550776394e we forgot to call KeepLogSeg again to
recompute the horizon after invalidating replication slots. In cases
where other slots remained, the limits would be recomputed eventually
for other reasons, but if all slots were invalidated, the limits would
not move at all afterwards. Repair.
Backpatch to 13 where the feature was introduced.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reported-by: Marcin Krupowicz <mk@071.ovh>
Discussion: https://postgr.es/m/17103-004130e8f27782c9@postgresql.org
Since commit c24dcd0cfd, we have been using pg_pread() to read the WAL
file, which doesn't change the seek position (unless we fall back to
the implementation in src/port/pread.c). Update comment accordingly.
Backpatch-through: 12, where we started to use pg_pread()
This only happens if (1) the new standby has no WAL available locally,
(2) the new standby is starting from the old timeline, (3) the promotion
happened in the WAL segment from which the new standby is starting,
(4) the timeline history file for the new timeline is available from
the archive but the WAL files for are not (i.e. this is a race),
(5) the WAL files for the new timeline are available via streaming,
and (6) recovery_target_timeline='latest'.
Commit ee994272ca50f70b53074f0febaec97e28f83c4e introduced this
logic and was an improvement over the previous code, but it mishandled
this case. If recovery_target_timeline='latest' and restore_command is
set, validateRecoveryParameters() can change recoveryTargetTLI to be
different from receiveTLI. If streaming is then tried afterward,
expectedTLEs gets initialized with the history of the wrong timeline.
It's supposed to be a list of entries explaining how to get to the
target timeline, but in this case it ends up with a list of entries
explaining how to get to the new standby's original timeline, which
isn't right.
Dilip Kumar and Robert Haas, reviewed by Kyotaro Horiguchi.
Discussion: http://postgr.es/m/CAFiTN-sE-jr=LB8jQuxeqikd-Ux+jHiXyh4YDiZMPedgQKup0g@mail.gmail.com
If a promotion is triggered while recovery is paused, the paused state ends
and promotion continues. But previously in that case
pg_get_wal_replay_pause_state() returned 'paused' wrongly while a promotion
was ongoing.
This commit changes a standby promotion so that it marks the recovery
pause state as 'not paused' when it's triggered, to fix the issue.
Author: Fujii Masao
Reviewed-by: Dilip Kumar, Kyotaro Horiguchi
Discussion: https://postgr.es/m/f706876c-4894-0ba5-6f4d-79803eeea21b@oss.nttdata.com
Also "make reformat-dat-files".
The only change worthy of note is that pgindent messed up the formatting
of launcher.c's struct LogicalRepWorkerId, which led me to notice that
that struct wasn't used at all anymore, so I just took it out.
This set of commits has some bugs with known fixes, but at this late
stage in the release cycle it seems best to revert and resubmit next
time, along with some new automated test coverage for this whole area.
Commits reverted:
dc88460c: Doc: Review for "Optionally prefetch referenced data in recovery."
1d257577: Optionally prefetch referenced data in recovery.
f003d9f8: Add circular WAL decoding buffer.
323cbe7c: Remove read_page callback from XLogReader.
Remove the new GUC group WAL_RECOVERY recently added by a55a9847, as the
corresponding section of config.sgml is now reverted.
Discussion: https://postgr.es/m/CAOuzzgrn7iKnFRsB4MHp3UisEQAGgZMbk_ViTN4HV4-Ksq8zCg%40mail.gmail.com
Introduce a new GUC recovery_prefetch, disabled by default. When
enabled, look ahead in the WAL and try to initiate asynchronous reading
of referenced data blocks that are not yet cached in our buffer pool.
For now, this is done with posix_fadvise(), which has several caveats.
Better mechanisms will follow in later work on the I/O subsystem.
The GUC maintenance_io_concurrency is used to limit the number of
concurrent I/Os we allow ourselves to initiate, based on pessimistic
heuristics used to infer that I/Os have begun and completed.
The GUC wal_decode_buffer_size is used to limit the maximum distance we
are prepared to read ahead in the WAL to find uncached blocks.
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com> (parts)
Reviewed-by: Andres Freund <andres@anarazel.de> (parts)
Reviewed-by: Tomas Vondra <tomas.vondra@2ndquadrant.com> (parts)
Tested-by: Tomas Vondra <tomas.vondra@2ndquadrant.com>
Tested-by: Jakub Wartak <Jakub.Wartak@tomtom.com>
Tested-by: Dmitry Dolgov <9erthalion6@gmail.com>
Tested-by: Sait Talha Nisanci <Sait.Nisanci@microsoft.com>
Discussion: https://postgr.es/m/CA%2BhUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq%3DAovOddfHpA%40mail.gmail.com
Teach xlogreader.c to decode its output into a circular buffer, to
support optimizations based on looking ahead.
* XLogReadRecord() works as before, consuming records one by one, and
allowing them to be examined via the traditional XLogRecGetXXX()
macros.
* An alternative new interface XLogNextRecord() is added that returns
pointers to DecodedXLogRecord structs that can be examined directly.
* XLogReadAhead() provides a second cursor that lets you see
further ahead, as long as data is available and there is enough space
in the decoding buffer. This returns DecodedXLogRecord pointers to the
caller, but also adds them to a queue of records that will later be
consumed by XLogNextRecord()/XLogReadRecord().
The buffer's size is controlled with wal_decode_buffer_size. The buffer
could potentially be placed into shared memory, for future projects.
Large records that don't fit in the circular buffer are called
"oversized" and allocated separately with palloc().
Discussion: https://postgr.es/m/CA+hUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq=AovOddfHpA@mail.gmail.com
Previously, the XLogReader module would fetch new input data using a
callback function. Redesign the interface so that it tells the caller
to insert more data with a special return value instead. This API suits
later patches for prefetching, encryption and maybe other future
projects that would otherwise require continually extending the callback
interface.
As incidental cleanup work, move global variables readOff, readLen and
readSegNo inside XlogReaderState.
Author: Kyotaro HORIGUCHI <horiguchi.kyotaro@lab.ntt.co.jp>
Author: Heikki Linnakangas <hlinnaka@iki.fi> (parts of earlier version)
Reviewed-by: Antonin Houska <ah@cybertec.at>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Takashi Menjo <takashi.menjo@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20190418.210257.43726183.horiguchi.kyotaro%40lab.ntt.co.jp
Previously if hot standby was enabled, archive recovery exited with
an error when it found WAL generated with wal_level=minimal.
But if hot standby was disabled, it just reported a warning and
continued in that case. Which could lead to data loss or errors
during normal operation. A warning was emitted, but users could
easily miss that and not notice this serious situation until
they encountered the actual errors.
To improve this situation, this commit changes archive recovery
so that it exits with FATAL error when it finds WAL generated with
wal_level=minimal whatever the setting of hot standby. This enables
users to notice the serious situation soon.
The FATAL error is thrown if archive recovery starts from a base
backup taken before wal_level is changed to minimal. When archive
recovery exits with the error, if users have a base backup taken
after setting wal_level to higher than minimal, they can recover
the database by starting archive recovery from that newer backup.
But note that if such backup doesn't exist, there is no easy way to
complete archive recovery, which may make the database server
unstartable and users may lose whole database. The commit adds
the note about this risk into the document.
Even in the case of unstartable database server, previously by just
disabling hot standby users could avoid the error during archive
recovery, forcibly start up the server and salvage data from it.
But note that this commit makes this procedure unavailable at all.
Author: Takamichi Osumi
Reviewed-by: Laurenz Albe, Kyotaro Horiguchi, David Steele, Fujii Masao
Discussion: https://postgr.es/m/OSBPR01MB4888CBE1DA08818FD2D90ED8EDF90@OSBPR01MB4888.jpnprd01.prod.outlook.com
While looking at Robert Foggia's report, I noticed a passel of
other issues in the same area:
* The scheme for backslash-quoting newlines in pathnames is just
wrong; it will misbehave if the last ordinary character in a pathname
is a backslash. I'm not sure why we're bothering to allow newlines
in tablespace paths, but if we're going to do it we should do it
without introducing other problems. Hence, backslashes themselves
have to be backslashed too.
* The author hadn't read the sscanf man page very carefully, because
this code would drop any leading whitespace from the path. (I doubt
that a tablespace path with leading whitespace could happen in
practice; but if we're bothering to allow newlines in the path, it
sure seems like leading whitespace is little less implausible.) Using
sscanf for the task of finding the first space is overkill anyway.
* While I'm not 100% sure what the rationale for escaping both \r and
\n is, if the idea is to allow Windows newlines in the file then this
code failed, because it'd throw an error if it saw \r followed by \n.
* There's no cross-check for an incomplete final line in the map file,
which would be a likely apparent symptom of the improper-escaping
bug.
On the generation end, aside from the escaping issue we have:
* If needtblspcmapfile is true then do_pg_start_backup will pass back
escaped strings in tablespaceinfo->path values, which no caller wants
or is prepared to deal with. I'm not sure if there's a live bug from
that, but it looks like there might be (given the dubious assumption
that anyone actually has newlines in their tablespace paths).
* It's not being very paranoid about the possibility of random stuff
in the pg_tblspc directory. IMO we should ignore anything without an
OID-like name.
The escaping rule change doesn't seem back-patchable: it'll require
doubling of backslashes in the tablespace_map file, which is basically
a basebackup format change. The odds of that causing trouble are
considerably more than the odds of the existing bug causing trouble.
The rest of this seems somewhat unlikely to cause problems too,
so no back-patch.
Robert Foggia of Trustwave reported that read_tablespace_map()
fails to prevent an overrun of its on-stack input buffer.
Since the tablespace map file is presumed trustworthy, this does
not seem like an interesting security vulnerability, but still
we should fix it just in the name of robustness.
While here, document that pg_basebackup's --tablespace-mapping option
doesn't work with tar-format output, because it doesn't. To make it
work, we'd have to modify the tablespace_map file within the tarball
sent by the server, which might be possible but I'm not volunteering.
(Less-painful solutions would require changing the basebackup protocol
so that the source server could adjust the map. That's not very
appetizing either.)
Previously, the code and documentation seem to have essentially
assumed than a call to pg_wal_replay_pause() would take place
immediately, but that's not the case, because we only check for a
pause in certain places. This means that a tool that uses this
function and then wants to do something else afterward that is
dependent on the pause having taken effect doesn't know how long it
needs to wait to be sure that no more WAL is going to be replayed.
To avoid that, add a new function pg_get_wal_replay_pause_state()
which returns either 'not paused', 'paused requested', or 'paused'.
After calling pg_wal_replay_pause() the status will immediate change
from 'not paused' to 'pause requested'; when the startup process
has noticed this, the status will change to 'pause'. For backward
compatibility, pg_is_wal_replay_paused() still exists and returns
the same thing as before: true if a pause has been requested,
whether or not it has taken effect yet; and false if not.
The documentation is updated to clarify.
To improve the changes that a pause request is quickly confirmed
effective, adjust things so that WaitForWALToBecomeAvailable will
swiftly reach a call to recoveryPausesHere() when a pause request
is made.
Dilip Kumar, reviewed by Simon Riggs, Kyotaro Horiguchi, Yugo Nagata,
Masahiko Sawada, and Bharath Rupireddy.
Discussion: http://postgr.es/m/CAFiTN-vcLLWEm8Zr%3DYK83rgYrT9pbC8VJCfa1kY9vL3AUPfu6g%40mail.gmail.com
This commit adds new GUC track_wal_io_timing. When this is enabled,
the total amounts of time XLogWrite writes and issue_xlog_fsync syncs
WAL data to disk are counted in pg_stat_wal. This information would be
useful to check how much WAL write and sync affect the performance.
Enabling track_wal_io_timing will make the server query the operating
system for the current time every time WAL is written or synced,
which may cause significant overhead on some platforms. To avoid such
additional overhead in the server with track_io_timing enabled,
this commit introduces track_wal_io_timing as a separate parameter from
track_io_timing.
Note that WAL write and sync activity by walreceiver has not been tracked yet.
This commit makes the server also track the numbers of times XLogWrite
writes and issue_xlog_fsync syncs WAL data to disk, in pg_stat_wal,
regardless of the setting of track_wal_io_timing. This counters can be
used to calculate the WAL write and sync time per request, for example.
Bump PGSTAT_FILE_FORMAT_ID.
Bump catalog version.
Author: Masahiro Ikeda
Reviewed-By: Japin Li, Hayato Kuroda, Masahiko Sawada, David Johnston, Fujii Masao
Discussion: https://postgr.es/m/0509ad67b585a5b86a83d445dfa75392@oss.nttdata.com
pg_standby was useful more than a decade ago, but now it is obsolete.
It has been proposed that we retire it many times. Now seems like a
good time to finally do it, because "waiting restore commands"
are incompatible with a proposed recovery prefetching feature.
Discussion: https://postgr.es/m/20201029024412.GP5380%40telsasoft.com
Author: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Previously, the hot_standby=off code path did this at end of recovery,
while the hot_standby=on code path did it at the beginning of recovery.
It's better to do this in only one place because (a) it's simpler,
(b) StartupCLOG() is trivial so trying to postpone the work isn't
useful, and (c) this will make it possible to simplify some other
logic.
Patch by me, reviewed by Heikki Linnakangas.
Discussion: http://postgr.es/m/CA+TgmoZYig9+AQodhF5sRXuKkJ=RgFDugLr3XX_dz_F-p=TwTg@mail.gmail.com
Up until now, we've held this lock when performing a checkpoint or
restartpoint, but commit 076a055acf3c55314de267c62b03191586d79cf6 back
in 2004 and commit 7e48b77b1cebb9a43f9fdd6b17128a0ba36132f9 from 2009,
taken together, have removed all need for this. In the present code,
there's only ever one process entitled to attempt a checkpoint: either
the checkpointer, during normal operation, or the postmaster, during
single-user operation. So, we don't need the lock.
One possible concern in making this change is that it means that
a substantial amount of code where HOLD_INTERRUPTS() was previously
in effect due to the preceding LWLockAcquire() will now be
running without that. This could mean that ProcessInterrupts()
gets called in places from which it didn't before. However, this
seems unlikely to do very much, because the checkpointer doesn't
have any signal mapped to die(), so it's not clear how,
for example, ProcDiePending = true could happen in the first
place. Similarly with ClientConnectionLost and recovery conflicts.
Also, if there are any such problems, we might want to fix them
rather than reverting this, since running lots of code with
interrupt handling suspended is generally bad.
Patch by me, per an inquiry by Amul Sul. Review by Tom Lane
and Michael Paquier.
Discussion: http://postgr.es/m/CAAJ_b97XnBBfYeSREDJorFsyoD1sHgqnNuCi=02mNQBUMnA=FA@mail.gmail.com
When certain parameters are changed on a physical replication primary,
this is communicated to standbys using the XLOG_PARAMETER_CHANGE WAL
record. The standby then checks whether its own settings are at least
as big as the ones on the primary. If not, the standby shuts down
with a fatal error.
This patch changes this behavior for hot standbys to pause recovery at
that point instead. That allows read traffic on the standby to
continue while database administrators figure out next steps. When
recovery is unpaused, the server shuts down (as before). The idea is
to fix the parameters while recovery is paused and then restart when
there is a maintenance window.
Reviewed-by: Sergei Kornilov <sk@zsrv.org>
Discussion: https://www.postgresql.org/message-id/flat/4ad69a4c-cc9b-0dfe-0352-8b1b0cd36c7b@2ndquadrant.com
The counter tracking the last segment number recycled was getting
initialized when recycling one single segment, while it should be used
across a full cycle of segments recycled to prevent useless checks
related to entries already recycled.
This performance issue has been introduced by b2a5545, and it was first
implemented in 61b86142.
No backpatch is done per the lack of field complaints.
Reported-by: Andres Freund, Thomas Munro
Author: Michael Paquier
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/20170621211016.eln6cxxp3jrv7m4m@alap3.anarazel.de
Discussion: https://postgr.es/m/CA+hUKG+DRiF9z1_MU4fWq+RfJMxP7zjoptfcmuCFPeO4JM2iVg@mail.gmail.com
Instead of making many block-sized write() calls to fill a new WAL file
with zeroes, make a smaller number of pwritev() calls (or various
emulations). The actual number depends on the OS's IOV_MAX, which
PG_IOV_MAX currently caps at 32. That means we'll write 256kB per call
on typical systems. We may want to tune the number later with more
experience.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA%2BhUKGJA%2Bu-220VONeoREBXJ9P3S94Y7J%2BkqCnTYmahvZJwM%3Dg%40mail.gmail.com
The patch needs test cases, reorganization, and cfbot testing.
Technically reverts commits 5c31afc49d..e35b2bad1a (exclusive/inclusive)
and 08db7c63f3..ccbe34139b.
Reported-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/E1ktAAG-0002V2-VB@gemulon.postgresql.org
This adds a key management system that stores (currently) two data
encryption keys of length 128, 192, or 256 bits. The data keys are
AES256 encrypted using a key encryption key, and validated via GCM
cipher mode. A command to obtain the key encryption key must be
specified at initdb time, and will be run at every database server
start. New parameters allow a file descriptor open to the terminal to
be passed. pg_upgrade support has also been added.
Discussion: https://postgr.es/m/CA+fd4k7q5o6Nc_AaX6BcYM9yqTbC6_pnH-6nSD=54Zp6NBQTCQ@mail.gmail.com
Discussion: https://postgr.es/m/20201202213814.GG20285@momjian.us
Author: Masahiko Sawada, me, Stephen Frost
Revert ac22929a26, as well as the followup fix 113d3591b8. Because it broke
the assumption that the startup process waiting for the recovery conflict
on buffer pin should be waken up only by buffer unpin or the timeout enabled
in ResolveRecoveryConflictWithBufferPin(). It caused, for example,
SIGHUP signal handler or walreceiver process to wake that startup process
up unnecessarily frequently.
Additionally, add the comments about why that dedicated latch that
the reverted patch tried to get rid of should not be removed.
Thanks to Kyotaro Horiguchi for the discussion.
Author: Fujii Masao
Discussion: https://postgr.es/m/d8c0c608-021b-3c73-fffd-3240829ee986@oss.nttdata.com
This is done for end-of-recovery and shutdown checkpoints/restartpoints
(end-of-recovery restartpoints don't exist) rather than all types of
checkpoints, in cases where it may not be possible to rely on
pg_stat_activity to get a status from the startup or checkpointer
processes.
For example, at the end of a crash recovery, this is useful to know if a
checkpoint is running in the startup process, while previously the ps
display may only show some information about "recovering" something,
that can be confusing while a checkpoint runs.
Author: Justin Pryzby
Reviewed-by: Nathan Bossart, Kirk Jamison, Fujii Masao, Michael Paquier
Discussion: https://postgr.es/m/20200818225238.GP17022@telsasoft.com
User-visible log messages should go through ereport(), so they are
subject to translation. Many remaining elog(LOG) calls are really
debugging calls.
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://www.postgresql.org/message-id/flat/92d6f545-5102-65d8-3c87-489f71ea0a37%40enterprisedb.com
This commit changes the startup process in the standby server so that
it handles the interrupt signals after waiting for wal_retrieve_retry_interval
on the latch and resetting it, before entering another wait on the latch.
This change causes the standby server to promptly handle interrupt signals.
Otherwise, previously, there was the case where the standby needs to
wait extra five seconds to shutdown when the shutdown request arrived
while the startup process was waiting for wal_retrieve_retry_interval
on the latch.
Author: Fujii Masao, but implementation idea is from Soumyadeep Chakraborty
Reviewed-by: Soumyadeep Chakraborty
Discussion: https://postgr.es/m/9d7e6ab0-8a53-ddb9-63cd-289bcb25fe0e@oss.nttdata.com
Introduce TimestampDifferenceMilliseconds() to simplify callers
that would rather have the difference in milliseconds, instead of
the select()-oriented seconds-and-microseconds format. This gets
rid of at least one integer division per call, and it eliminates
some apparently-easy-to-mess-up arithmetic.
Two of these call sites were in fact wrong:
* pg_prewarm's autoprewarm_main() forgot to multiply the seconds
by 1000, thus ending up with a delay 1000X shorter than intended.
That doesn't quite make it a busy-wait, but close.
* postgres_fdw's pgfdw_get_cleanup_result() thought it needed to compute
microseconds not milliseconds, thus ending up with a delay 1000X longer
than intended. Somebody along the way had noticed this problem but
misdiagnosed the cause, and imposed an ad-hoc 60-second limit rather
than fixing the units. This was relatively harmless in context, because
we don't care that much about exactly how long this delay is; still,
it's wrong.
There are a few more callers of TimestampDifference() that don't
have a direct need for seconds-and-microseconds, but can't use
TimestampDifferenceMilliseconds() either because they do need
microsecond precision or because they might possibly deal with
intervals long enough to overflow 32-bit milliseconds. It might be
worth inventing another API to improve that, but that seems outside
the scope of this patch; so those callers are untouched here.
Given the fact that we are fixing some bugs, and the likelihood
that future patches might want to back-patch code that uses this
new API, back-patch to all supported branches.
Alexey Kondratov and Tom Lane
Discussion: https://postgr.es/m/3b1c053a21c07c1ed5e00be3b2b855ef@postgrespro.ru
Commit ac22929a26 changed recoveryWakeupLatch so that it's reset to
NULL at the end of recovery. This change could cause a segmentation fault
in the buildfarm member 'elver'.
Previously the latch was reset to NULL after calling ShutdownWalRcv().
But there could be a window between ShutdownWalRcv() and the actual
exit of walreceiver. If walreceiver set the latch during that window,
the segmentation fault could happen.
To fix the issue, this commit changes walreceiver so that it sets
the latch only when the latch has not been reset to NULL yet.
Author: Fujii Masao
Discussion: https://postgr.es/m/5c1f8a85-747c-7bf9-241e-dd467d8a3586@iki.fi
This commit gets rid of the dedicated latch for signaling the startup
process in favor of using its procLatch, since that comports better
with possible generic signal handlers using that latch.
Commit 1e53fe0e70 changed background processes so that they use standard
SIGHUP handler. Like that, this commit also makes the startup process use
standard SIGHUP handler to simplify the code.
Author: Fujii Masao
Reviewed-by: Bharath Rupireddy, Michael Paquier
Discussion: https://postgr.es/m/CALj2ACXPorUqePswDtOeM_s82v9RW32E1fYmOPZ5NuE+TWKj_A@mail.gmail.com
This view shows the statistics about WAL activity. Currently it has only
two columns: wal_buffers_full and stats_reset. wal_buffers_full column
indicates the number of times WAL data was written to the disk because
WAL buffers got full. This information is useful when tuning wal_buffers.
stats_reset column indicates the time at which these statistics were
last reset.
pg_stat_wal view is also the basic infrastructure to expose other
various statistics about WAL activity later.
Bump PGSTAT_FILE_FORMAT_ID due to the change in pgstat format.
Bump catalog version.
Author: Masahiro Ikeda
Reviewed-by: Takayuki Tsunakawa, Kyotaro Horiguchi, Amit Kapila, Fujii Masao
Discussion: https://postgr.es/m/188bd3f2d2233cf97753b5ced02bb050@oss.nttdata.com
Providing this information can be useful for example when diagnosing
problems related to recovery conflicts or for recovery issues without
having to go through the output generated by pg_waldump to get some
information about the blocks a WAL record works on.
The block information is printed in the same format as pg_waldump. This
already existed in xlog.c for debugging purposes with -DWAL_DEBUG, so
adding the block information in the callback has required just a small
refactoring.
Author: Bertrand Drouvot
Reviewed-by: Michael Paquier, Masahiko Sawada
Discussion: https://postgr.es/m/c31e2cba-efda-762c-f4ad-5c25e5dac3d0@amazon.com
Previously, we called fsync() after writing out individual pg_xact,
pg_multixact and pg_commit_ts pages due to cache pressure, leading to
regular I/O stalls in user backends and recovery. Collapse requests for
the same file into a single system call as part of the next checkpoint,
as we already did for relation files, using the infrastructure developed
by commit 3eb77eba. This can cause a significant improvement to
recovery performance, especially when it's otherwise CPU-bound.
Hoist ProcessSyncRequests() up into CheckPointGuts() to make it clearer
that it applies to all the SLRU mini-buffer-pools as well as the main
buffer pool. Rearrange things so that data collected in CheckpointStats
includes SLRU activity.
Also remove the Shutdown{CLOG,CommitTS,SUBTRANS,MultiXact}() functions,
because they were redundant after the shutdown checkpoint that
immediately precedes them. (I'm not sure if they were ever needed, but
they aren't now.)
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> (parts)
Tested-by: Jakub Wartak <Jakub.Wartak@tomtom.com>
Discussion: https://postgr.es/m/CA+hUKGLJ=84YT+NvhkEEDAuUtVHMfQ9i-N7k_o50JmQ6Rpj_OQ@mail.gmail.com
To make GetSnapshotData() more scalable, it cannot not look at at each proc's
xmin: While snapshot contents do not need to change whenever a read-only
transaction commits or a snapshot is released, a proc's xmin is modified in
those cases. The frequency of xmin modifications leads to, particularly on
higher core count systems, many cache misses inside GetSnapshotData(), despite
the data underlying a snapshot not changing. That is the most
significant source of GetSnapshotData() scaling poorly on larger systems.
Without accessing xmins, GetSnapshotData() cannot calculate accurate horizons /
thresholds as it has so far. But we don't really have to: The horizons don't
actually change that much between GetSnapshotData() calls. Nor are the horizons
actually used every time a snapshot is built.
The trick this commit introduces is to delay computation of accurate horizons
until there use and using horizon boundaries to determine whether accurate
horizons need to be computed.
The use of RecentGlobal[Data]Xmin to decide whether a row version could be
removed has been replaces with new GlobalVisTest* functions. These use two
thresholds to determine whether a row can be pruned:
1) definitely_needed, indicating that rows deleted by XIDs >= definitely_needed
are definitely still visible.
2) maybe_needed, indicating that rows deleted by XIDs < maybe_needed can
definitely be removed
GetSnapshotData() updates definitely_needed to be the xmin of the computed
snapshot.
When testing whether a row can be removed (with GlobalVisTestIsRemovableXid())
and the tested XID falls in between the two (i.e. XID >= maybe_needed && XID <
definitely_needed) the boundaries can be recomputed to be more accurate. As it
is not cheap to compute accurate boundaries, we limit the number of times that
happens in short succession. As the boundaries used by
GlobalVisTestIsRemovableXid() are never reset (with maybe_needed updated by
GetSnapshotData()), it is likely that further test can benefit from an earlier
computation of accurate horizons.
To avoid regressing performance when old_snapshot_threshold is set (as that
requires an accurate horizon to be computed), heap_page_prune_opt() doesn't
unconditionally call TransactionIdLimitedForOldSnapshots() anymore. Both the
computation of the limited horizon, and the triggering of errors (with
SetOldSnapshotThresholdTimestamp()) is now only done when necessary to remove
tuples.
This commit just removes the accesses to PGXACT->xmin from
GetSnapshotData(), but other members of PGXACT residing in the same
cache line are accessed. Therefore this in itself does not result in a
significant improvement. Subsequent commits will take advantage of the
fact that GetSnapshotData() now does not need to access xmins anymore.
Note: This contains a workaround in heap_page_prune_opt() to keep the
snapshot_too_old tests working. While that workaround is ugly, the tests
currently are not meaningful, and it seems best to address them separately.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
The reason for doing so is that a subsequent commit will need that to
avoid wraparound issues. As the subsequent change is large this was
split out for easier review.
The reason this is not a perfect straight-forward change is that we do
not want track 64bit xids in the procarray or the WAL. Therefore we
need to advance lastestCompletedXid in relation to 32 bit xids. The
code for that is now centralized in MaintainLatestCompletedXid*.
Author: Andres Freund
Reviewed-By: Thomas Munro, Robert Haas, David Rowley
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
Including Full in variable names duplicates the type information and
leads to overly long names. As FullTransactionId cannot accidentally
be casted to TransactionId that does not seem necessary.
Author: Andres Freund
Discussion: https://postgr.es/m/20200724011143.jccsyvsvymuiqfxu@alap3.anarazel.de
When fast promotion was supported in 9.3, non-fast promotion became
undocumented feature and it's basically not available for ordinary users.
However we decided not to remove non-fast promotion at that moment,
to leave it for a release or two for debugging purpose or as an emergency
method because fast promotion might have some issues, and then to
remove it later. Now, several versions were released since that decision
and there is no longer reason to keep supporting non-fast promotion.
Therefore this commit removes non-fast promotion.
Author: Fujii Masao
Reviewed-by: Hamid Akhtar, Kyotaro Horiguchi
Discussion: https://postgr.es/m/76066434-648f-f567-437b-54853b43398f@oss.nttdata.com
max_slot_wal_keep_size that was added in v13 and wal_keep_segments are
the GUC parameters to specify how much WAL files to retain for
the standby servers. While max_slot_wal_keep_size accepts the number of
bytes of WAL files, wal_keep_segments accepts the number of WAL files.
This difference of setting units between those similar parameters could
be confusing to users.
To alleviate this situation, this commit renames wal_keep_segments to
wal_keep_size, and make users specify the WAL size in it instead of
the number of WAL files.
There was also the idea to rename max_slot_wal_keep_size to
max_slot_wal_keep_segments, in the discussion. But we have been moving
away from measuring in segments, for example, checkpoint_segments was
replaced by max_wal_size. So we concluded to rename wal_keep_segments
to wal_keep_size.
Back-patch to v13 where max_slot_wal_keep_size was added.
Author: Fujii Masao
Reviewed-by: Álvaro Herrera, Kyotaro Horiguchi, David Steele
Discussion: https://postgr.es/m/574b4ea3-e0f9-b175-ead2-ebea7faea855@oss.nttdata.com
