When BUFFERS option is enabled, EXPLAIN command includes the information
on buffer usage during each plan node, in its output. In addition to that,
this commit makes EXPLAIN command include also the information on
buffer usage during planning phase, in its output. This feature makes it
easier to discern the cases where lots of buffer access happen during
planning.
Author: Julien Rouhaud, slightly revised by Fujii Masao
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/16109-26a1a88651e90608@postgresql.org
The primary motivation for this change is that it will be used by the
upcoming patch to add backup manifests, but it also seems to have some
potential more general use.
Andres Freund and Robert Haas
Discussion: http://postgr.es/m/20200330020814.nspra4mvby42yoa4@alap3.anarazel.de
Instead of disabling autovacuum on these test tables, adjust the
partition boundaries so that the child partitions are not all the
same size. That should cause the planner to use a predictable
ordering of the per-partition scan nodes even in cases where
autovacuum causes the rowcount estimates to be off a bit.
Moreover, this also lets these tests show that the planner does
properly order the tables in descending size order, something
that wasn't being proven before.
The pagg_tab1 and pagg_tab2 partitions are still all the same
size, but that should be fine, because those tables are so small
that (1) autovacuum won't fire on them, and (2) even if it did,
it couldn't change the reltuples value --- with only one page,
it can't see just part of the relation.
Discussion: https://postgr.es/m/24467.1585838693@sss.pgh.pa.us
A join that was added in commit 9b2009c4cf that did not use the INNER
keyword but the existing query used it. It was cleaner to remove the
existing INNER keyword.
Reported-by: Peter Eisentraut
Discussion: https://postgr.es/m/a1ffbfda-59d2-5732-e5fb-3df8582b6434@2ndquadrant.com
Backpatch-through: 9.5
This patch replaces the boolean GUC log_parameters_on_error introduced
by commit ba79cb5dc with an integer log_parameter_max_length_on_error,
adding the ability to specify how many bytes to trim each logged
parameter value to. (The previous coding hard-wired that choice at
64 bytes.)
In addition, add a new parameter log_parameter_max_length that provides
similar control over truncation of query parameters that are logged in
response to statement-logging options, as opposed to errors. Previous
releases always logged such parameters in full, possibly causing log
bloat.
For backwards compatibility with prior releases,
log_parameter_max_length defaults to -1 (log in full), while
log_parameter_max_length_on_error defaults to 0 (no logging).
Per discussion, log_parameter_max_length is SUSET since the DBA should
control routine logging behavior, but log_parameter_max_length_on_error
is USERSET because it also affects errcontext data sent back to the
client.
Alexey Bashtanov, editorialized a little by me
Discussion: https://postgr.es/m/b10493cc-a399-a03a-67c7-068f2791ee50@imap.cc
In b07642dbc, we added code to trigger autovacuums based on the number of
INSERTs into a table. This seems to have cause some destabilization of
the regression tests. Likely this is due to an autovacuum triggering
mid-test and (per theory from Tom Lane) one of the test's queries causes
autovacuum to skip some number of pages, resulting in the reltuples
estimate changing.
The failure that this is attempting to fix is around the order of subnodes
in an Append. Since the planner orders these according to the subnode
cost, then it's possible that a small change in the reltuples value changes
the subnode's cost enough that it swaps position with one of its fellow
subnodes.
The failure here only seems to occur on slower buildfarm machines. In this
case, lousyjack, which seems have taken over 8 minutes to run just
the partitionwise_aggregate test. Such a slow run would increase the
chances that the autovacuum launcher would trigger a vacuum mid-test.
Faster machines run this test in sub second time, so have a much smaller
window for an autovacuum to trigger.
Here we fix this by disabling autovacuum on all tables created in the test.
Additionally, this reverts the change made in the
partitionwise_aggregate test in 2dc16efed.
Discussion: https://postgr.es/m/22297.1585797192@sss.pgh.pa.us
This adds SQL expressions NORMALIZE() and IS NORMALIZED to convert and
check Unicode normal forms, per SQL standard.
To support fast IS NORMALIZED tests, we pull in a new data file
DerivedNormalizationProps.txt from Unicode and build a lookup table
from that, using techniques similar to ones already used for other
Unicode data. make update-unicode will keep it up to date. We only
build and use these tables for the NFC and NFKC forms, because they
are too big for NFD and NFKD and the improvement is not significant
enough there.
Reviewed-by: Daniel Verite <daniel@manitou-mail.org>
Reviewed-by: Andreas Karlsson <andreas@proxel.se>
Discussion: https://www.postgresql.org/message-id/flat/c1909f27-c269-2ed9-12f8-3ab72c8caf7a@2ndquadrant.com
Commit 40d964ec99 allowed vacuum command to process indexes in parallel but
forgot to accumulate the buffer usage stats of parallel workers. This
allows leader backend to accumulate buffer usage stats of all the parallel
workers.
Reported-by: Julien Rouhaud
Author: Sawada Masahiko
Reviewed-by: Dilip Kumar, Amit Kapila and Julien Rouhaud
Discussion: https://postgr.es/m/20200328151721.GB12854@nol
This commit makes pg_stat_statements support new GUC
pg_stat_statements.track_planning. If this option is enabled,
pg_stat_statements tracks the planning statistics of the statements,
e.g., the number of times the statement was planned, the total time
spent planning the statement, etc. This feature is useful to check
the statements that it takes a long time to plan. Previously since
pg_stat_statements tracked only the execution statistics, we could
not use that for the purpose.
The planning and execution statistics are stored at the end of
each phase separately. So there are not always one-to-one relationship
between them. For example, if the statement is successfully planned
but fails in the execution phase, only its planning statistics are stored.
This may cause the users to be able to see different pg_stat_statements
results from the previous version. To avoid this,
pg_stat_statements.track_planning needs to be disabled.
This commit bumps the version of pg_stat_statements to 1.8
since it changes the definition of pg_stat_statements function.
Author: Julien Rouhaud, Pascal Legrand, Thomas Munro, Fujii Masao
Reviewed-by: Sergei Kornilov, Tomas Vondra, Yoshikazu Imai, Haribabu Kommi, Tom Lane
Discussion: https://postgr.es/m/CAHGQGwFx_=DO-Gu-MfPW3VQ4qC7TfVdH2zHmvZfrGv6fQ3D-Tw@mail.gmail.com
Discussion: https://postgr.es/m/CAEepm=0e59Y_6Q_YXYCTHZkqOc6H2pJ54C_Xe=VFu50Aqqp_sA@mail.gmail.com
Discussion: https://postgr.es/m/DB6PR0301MB21352F6210E3B11934B0DCC790B00@DB6PR0301MB2135.eurprd03.prod.outlook.com
There's a number of SLRU caches used to access important data like clog,
commit timestamps, multixact, asynchronous notifications, etc. Until now
we had no easy way to monitor these shared caches, compute hit ratios,
number of reads/writes etc.
This commit extends the statistics collector to track this information
for a predefined list of SLRUs, and also introduces a new system view
pg_stat_slru displaying the data.
The list of built-in SLRUs is fixed, but additional SLRUs may be defined
in extensions. Unfortunately, there's no suitable registry of SLRUs, so
this patch simply defines a fixed list of SLRUs with entries for the
built-in ones and one entry for all additional SLRUs. Extensions adding
their own SLRU are fairly rare, so this seems acceptable.
This patch only allows monitoring of SLRUs, not tuning. The SLRU sizes
are still fixed (hard-coded in the code) and it's not entirely clear
which of the SLRUs might need a GUC to tune size. In a way, allowing us
to determine that is one of the goals of this patch.
Bump catversion as the patch introduces new functions and system view.
Author: Tomas Vondra
Reviewed-by: Alvaro Herrera
Discussion: https://www.postgresql.org/message-id/flat/20200119143707.gyinppnigokesjok@development
Fix lquery parsing to handle repeated flag characters correctly,
and to enforce the max label length correctly in some cases where
it did not before, and to detect empty labels in some cases where
it did not before.
In a more cosmetic vein, use a switch rather than if-then chains to
handle the different states, and avoid unnecessary checks on charlen
when looking for ASCII characters, and factor out multiple copies of
the label length checking code.
Tom Lane and Dmitry Belyavsky
Discussion: https://postgr.es/m/CADqLbzLVkBuPX0812o+z=c3i6honszsZZ6VQOSKR3VPbB56P3w@mail.gmail.com
Not much to say here --- does what it says on the tin. The "binary"
representation in each case is really just the same as the text format,
though we prefix a version-number byte in case anyone ever feels
motivated to change that. Thus, there's not any expectation of improved
speed or reduced space; the point here is just to allow clients to use
binary format for all columns of a query result or COPY data.
This makes use of the recently added ALTER TYPE support to add binary
I/O functions to an existing data type. As in commit a80818605,
we can piggy-back on there already being a new-for-v13 version of the
ltree extension, so we don't need a new update script file.
Nino Floris, reviewed by Alexander Korotkov and myself
Discussion: https://postgr.es/m/CANmj9Vxx50jOo1L7iSRxd142NyTz6Bdcgg7u9P3Z8o0=HGkYyQ@mail.gmail.com
We require the partition key to be a subset of the set of columns
being made unique, so that physically-separate indexes on the different
partitions are sufficient to enforce the uniqueness constraint.
The existing code checked that the listed columns appear, but did not
inquire into the index semantics, which is a serious oversight given
that different index opclasses might enforce completely different
notions of uniqueness.
Ideally, perhaps, we'd just match the partition key opfamily to the
index opfamily. But hash partitioning uses hash opfamilies which we
can't directly match to btree opfamilies. Hence, look up the equality
operator in each family, and accept if it's the same operator. This
should be okay in a fairly general sense, since the equality operator
ought to precisely represent the opfamily's notion of uniqueness.
A remaining weak spot is that we don't have a cross-index-AM notion of
which opfamily member is "equality". But we know which one to use for
hash and btree AMs, and those are the only two that are relevant here
at present. (Any non-core AMs that know how to enforce equality are
out of luck, for now.)
Back-patch to v11 where this feature was introduced.
Guancheng Luo, revised a bit by me
Discussion: https://postgr.es/m/D9C3CEF7-04E8-47A1-8300-CA1DCD5ED40D@gmail.com
Quite a few matching operators such as JSONB's @> used "contsel" and
"contjoinsel" as their selectivity estimators. That was a bad idea,
because (a) contsel is only a stub, yielding a fixed default estimate,
and (b) that default is 0.001, meaning we estimate these operators as
five times more selective than equality, which is surely pretty silly.
There's a good model for improving this in ltree's ltreeparentsel():
for any "var OP constant" query, we can try applying the operator
to all of the column's MCV and histogram values, taking the latter
as being a random sample of the non-MCV values. That code is
actually 100% generic, except for the question of exactly what
default selectivity ought to be plugged in when we don't have stats.
Hence, migrate the guts of ltreeparentsel() into the core code, provide
wrappers "matchingsel" and "matchingjoinsel" with a more-appropriate
default estimate, and use those for the non-geometric operators that
formerly used contsel (mostly JSONB containment operators and tsquery
matching).
Also apply this code to some match-like operators in hstore, ltree, and
pg_trgm, including the former users of ltreeparentsel as well as ones
that improperly used contsel. Since commit 911e70207 just created new
versions of those extensions that we haven't released yet, we can sneak
this change into those new versions instead of having to create an
additional generation of update scripts.
Patch by me, reviewed by Alexey Bashtanov
Discussion: https://postgr.es/m/12237.1582833074@sss.pgh.pa.us
The previously listed total of 179 does not appear to be correct for
SQL:2016 anymore. (Previous SQL versions had slightly different
feature sets, so it's plausible that it was once correct.) The
currently correct count is the number of rows in the respective tables
in appendix F in SQL parts 2 and 11, minus 2 features that are listed
twice. Thus the correct count is currently 177. This also matches
the number of Core entries the built documentation currently shows, so
it's internally consistent.
Old versions of opclass parameters patch supported ability to specify DEFAULT
as the opclass name in CREATE INDEX command. This ability was removed in the
final version, but 911e702077 still mentions that in the documentation.
In a psql session, if the connection to the server is abruptly cut, the
referenced connection would become NULL as of CheckConnection(). This
could cause a hard crash with psql if attempting to connect by reusing
the past connection's data because of a null-pointer dereference with
either PQhost() or PQdb(). This issue is fixed by making sure that no
reuse of the past connection is done if it does not exist.
Issue has been introduced by 6e5f8d4, so backpatch down to 12.
Reported-by: Hugh Wang
Author: Michael Paquier
Reviewed-by: Álvaro Herrera, Tom Lane
Discussion: https://postgr.es/m/16330-b34835d83619e25d@postgresql.org
Backpatch-through: 12
The coverity complained that dividing integer expressions and then
converting the integer quotient to type "double" would lose fractional
part. Typecasting one of the arguments of expression with double should
fix the report.
Author: Mahendra Singh Thalor
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/20200329224818.6phnhv7o2q2rfovf@alap3.anarazel.de
pg_rewind needs to copy from the source cluster to the target cluster a
set of relation blocks changed from the previous checkpoint where WAL
forked up to the end of WAL on the target. Building this list of
relation blocks requires a range of WAL segments that may not be present
anymore on the target's pg_wal, causing pg_rewind to fail. It is
possible to work around this issue by copying manually the WAL segments
needed but this may lead to some extra and actually useless work.
This commit introduces a new option allowing pg_rewind to use a
restore_command while doing the rewind by grabbing the parameter value
of restore_command from the target cluster configuration. This allows
the rewind operation to be more reliable, so as only the WAL segments
needed by the rewind are restored from the archives.
In order to be able to do that, a new routine is added to src/common/ to
allow frontend tools to restore files from archives using an
already-built restore command. This version is more simple than the
backend equivalent as there is no need to handle the non-recovery case.
Author: Alexey Kondratov
Reviewed-by: Andrey Borodin, Andres Freund, Alvaro Herrera, Alexander
Korotkov, Michael Paquier
Discussion: https://postgr.es/m/a3acff50-5a0d-9a2c-b3b2-ee36168955c1@postgrespro.ru
Must hold some lock on the pg_statistic_ext_data catalog *before*
we look up the tuple we aim to replace. Otherwise a concurrent
VACUUM FULL or similar operation could move it to a different TID,
leaving us trying to replace the wrong tuple.
Back-patch to v12 where this got broken.
Credit goes to Dean Rasheed; I'm just doing the clerical work.
Discussion: https://postgr.es/m/CAEZATCU0zHMDiQV0g8P2U+YSP9C1idUPrn79DajsbonwkN0xvQ@mail.gmail.com
The stats_ext test is not expecting that autovacuum will touch
any of its tables; an expectation falsified by commit b07642dbc.
Although I'm suspicious that there's something else going on that
makes extended stats estimates not 100% reproducible, it's pretty
easy to demonstrate that there are places in this test that fail
if an autovacuum updates the table's stats unexpectedly.
Hence, revert the band-aid changes made by 2dc16efed and 24566b359
in favor of summarily disabling autovacuum for all the tables that
this test checks estimated rowcounts for.
Also remove an evidently obsolete comment at the head of the test.
Discussion: https://postgr.es/m/15012.1585623298@sss.pgh.pa.us
When recovery target is reached and recovery is paused because of
recovery_target_action=pause, executing pg_wal_replay_resume() causes
the standby to promote, i.e., the recovery to end. So, in this case,
the previous message "Execute pg_wal_replay_resume() to continue"
logged was confusing because pg_wal_replay_resume() doesn't cause
the recovery to continue.
This commit improves the message logged when recovery is paused,
and the proper message is output based on what (pg_wal_replay_pause
or recovery_target_action) causes recovery to be paused.
Author: Sergei Kornilov, revised by Fujii Masao
Reviewed-by: Robert Haas
Discussion: https://postgr.es/m/19168211580382043@myt5-b646bde4b8f3.qloud-c.yandex.net
Buildfarm experience shows that this function can fail with ENOENT
if some other process unlinks a file between when we read the directory
entry and when we try to stat() it. The problem is old but we had
not noticed it until 085b6b667 added regression test coverage.
To fix, just ignore ENOENT failures. There is one other case that
this might hide: a symlink that points to nowhere. That seems okay
though, at least better than erroring.
Back-patch to v10 where this function was added, since the regression
test cases were too.
Discussion: https://postgr.es/m/20200308173103.GC1357@telsasoft.com
The existing implementation of the ltree ~ lquery match operator is
sufficiently complex and undocumented that it's hard to tell exactly
what it does. But one thing it clearly gets wrong is the combination
of NOT symbols (!) and '*' symbols. A pattern such as '*.!foo.*'
should, by any ordinary understanding of regular expression behavior,
match any ltree that has at least one label that's not "foo". As best
we can tell by experimentation, what it's actually matching is any
ltree in which *no* label is "foo". That's surprising, and not at all
what the documentation says.
Now, that's arguably a useful behavior, so if we rewrite to fix the
bug we should provide some other way to get it. To do so, add the
ability to attach lquery quantifiers to non-'*' items as well as '*'s.
Then the pattern '!foo{,}' expresses "any ltree in which no label is
foo". For backwards compatibility, the default quantifier for non-'*'
items has to be "{1}", although the default for '*' items is '{,}'.
I wouldn't have done it like that in a green field, but it's not
totally horrible.
Armed with that, rewrite checkCond() from scratch. Treating '*' and
non-'*' items alike makes it simpler, not more complicated, so that
the function actually gets a lot shorter than it was.
Filip Rembiałkowski, Tom Lane, Nikita Glukhov, per a very
ancient bug report from M. Palm
Discussion: https://postgr.es/m/CAP_rww=waX2Oo6q+MbMSiZ9ktdj6eaJj0cQzNu=Ry2cCDij5fw@mail.gmail.com
Ensure that the type name is mentioned in all cases (bare "syntax error"
isn't that helpful). Avoid using the term "level", since that's not
used in the documentation. Phrase error position reports as "at
character N" not "in position N"; the latter seems ambiguous, and it's
certainly not how we say it elsewhere. For the same reason, make the
character position values be 1-based not 0-based. Provide a position
in more cases. (I continued to leave that out of messages complaining
about end-of-input, where it seemed pointless, as well as messages
complaining about overall input complexity, where fingering any one part
of the input would be arbitrary.)
Discussion: https://postgr.es/m/15582.1585529626@sss.pgh.pa.us
This commit improves error reporting introduced by 911e702077. It puts
argument of errmsg() to the single line for easier grepping source for error
text. Also it improves wording of errhint().
The original implementation disallowed using OVERRIDING USER VALUE on
identity columns defined as GENERATED ALWAYS, which is not per
standard. So allow that now.
Expand documentation and tests around this.
Author: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Reviewed-by: Vik Fearing <vik@postgresfriends.org>
Discussion: https://www.postgresql.org/message-id/flat/CAEZATCVrh2ufCwmzzM%3Dk_OfuLhTTPBJCdFkimst2kry4oHepuQ%40mail.gmail.com
The definitions of the routines defined in xlogarchive.c have been part
of xlog_internal.h which is included by several frontend tools, but all
those routines are only called by the backend. More cleanup could be
done within xlog_internal.h, but that's already a nice cut.
This will help a follow-up patch for pg_rewind where handling of
restore_command is added for frontends.
Author: Alexey Kondratov, Michael Paquier
Reviewed-by: Álvaro Herrera, Alexander Korotkov
Discussion: https://postgr.es/m/a3acff50-5a0d-9a2c-b3b2-ee36168955c1@postgrespro.ru
