This enables streaming or serializing changes immediately in logical
decoding. This parameter is intended to be used to test logical decoding
and replication of large transactions for which otherwise we need to
generate the changes till logical_decoding_work_mem is reached.
This helps in reducing the timing of existing tests related to logical
replication of in-progress transactions and will help in writing tests for
for the upcoming feature for parallelly applying large in-progress
transactions.
Author: Shi yu
Reviewed-by: Sawada Masahiko, Shveta Mallik, Amit Kapila, Dilip Kumar, Kuroda Hayato, Kyotaro Horiguchi
Discussion: https://postgr.es/m/OSZPR01MB63104E7449DBE41932DB19F1FD1B9@OSZPR01MB6310.jpnprd01.prod.outlook.com
f4f2f2b was doing a sequential scan of pg_class before checking if a
relation had attributes dependent on aclitem as data typewhen building
the set of ALTER TABLE queries, but it would be costly on a regression
database.
While on it, make the query style more consistent with the rest.
Reported-by: Justin Pryzby
Discussion: https://postgr.es/m/20221223032724.GQ1153@telsasoft.com
While at it, use a common subroutine already.
This doesn't move the needle very far in terms of making these
functions non-throwing; the only case we're now able to trap is
numeric-OID-is-out-of-range. Still, it seems like a pretty
non-controversial step in that direction.
ed1a88dda added support functions for the ntile(), percent_rank() and
cume_dist() window functions but neglected to actually add these support
functions to the pg_proc entry for the corresponding window function.
Also, take this opportunity to add these window functions to one of the
regression tests added in ed1a88dda to give the support functions a little
bit of exercise. If I'd done that in the first place then the omission
would have been more obvious.
Bump the catversion, again.
After some copy-edit I made in commit 3a06a79cd1, we have a <sect2>
that only contains a warning box. This doesn't look good. Rework by
moving the sect2 title to be the warning's title, and put the 'id' to it
as well, so that the external reference continues to work.
Backpatch to 15.
In branch master, I also take the opportunity to add titles to a couple
of other warning boxes elsewhere in the documentation.
Discussion: https://postgr.es/m/20221219164713.ccnlvtkyj6lmshqq@alvherre.pgsql
The test added in commit e44dae07f9 has a thinko: it wants to read
info about a few WAL records, but it obtains the LSN of the final record
to read by asking for the WAL insert position; however,
pg_get_wal_records_info only accepts to read up to the flush position
(cf. IsFutureLSN()). In normal conditions there is no difference, since
the last record written by the preceding loop is known flushed and it's
the one the test wants; but it's possible to have some other process
insert another WAL record that isn't flushed, and that causes the whole
test to explode.
Fix by having pg_get_wal_records_info() read only up to the flushed
position. Backpatch to 15, which is where pg_walinspect appeared.
Author: Karina Litskevich <litskevichkarina@gmail.com>
Discussion: https://postgr.es/m/a5559c95-52c3-5eea-cd63-9b4f1c70ff96@gmail.com
Commit 2f9661311b changed command tags from strings to numbers, but
forgot to adjust the code in the event trigger example, which
consequently failed to compile.
While fixing that, improve the indentation to adhere to pgindent style.
Backpatch to v13, where the change was introduced.
Author: Laurenz Albe
Discussion: https://postgr.es/m/81e36ac17dc80489e74dc5b6914afa6ccdb1a99d.camel@cybertec.at
Fix incorrect code which was trying to convert a Bitmapset of columns at
the attnums according to a parent table and transform them into the
equivalent Bitmapset with same attnums according to the given child table.
This code is new as of a61b1f748 and was failing to do the correct
translation when there was an intermediate parent table between 'rel' and
'top_parent_rel'.
Reported-by: Ranier Vilela
Author: Richard Guo, Amit Langote
Discussion: https://postgr.es/m/CAEudQArohfB_Gy%2BhcH2-bANUkxgjJiP%3DABq01_LgTNTbcNijag%40mail.gmail.com
An epoll fd belonging to the parent should be closed in the child. A
kqueue fd is automatically closed by fork(), but we should still adjust
our counter. For poll and Windows systems, nothing special is required.
On all systems we free the memory.
No caller yet, but we'll need this if we start using WaitEventSet in the
postmaster as planned.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA%2BhUKG%2BZ-HpOj1JsO9eWUP%2Bar7npSVinsC_npxSy%2BjdOMsx%3DGg%40mail.gmail.com
At the time of commit 6a2a70a02 we didn't use latch infrastructure in
the postmaster. We're planning to start doing that, so we'd better make
sure that the signalfd inherited from a postmaster is not duplicated and
then leaked in the child.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/CA%2BhUKG%2BZ-HpOj1JsO9eWUP%2Bar7npSVinsC_npxSy%2BjdOMsx%3DGg%40mail.gmail.com
To be able to handle incoming connections on a server socket with
the WaitEventSet API, we'll need a new kind of event to indicate that
the the socket is ready to accept a connection.
On Unix, it's just the same as WL_SOCKET_READABLE, but on Windows there
is a different underlying kernel event that we need to map our
abstraction to.
No user yet, but a proposed patch would use this.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA%2BhUKG%2BZ-HpOj1JsO9eWUP%2Bar7npSVinsC_npxSy%2BjdOMsx%3DGg%40mail.gmail.com
The regression test suite includes a table called "tab_core_types" that
has one attribute based on the type "aclitem". Keeping this attribute
as-is causes hard failures when running pg_upgrade with an origin on
~15. This commit updates upgrade_adapt.sql to automatically detect the
tables with such attributes and switch them to text so as pg_upgrade
is able to go through its run.
This does not provide the same detection coverage as pg_upgrade, where
we are able to find out aclitems used in arrays, domains or even
composite types, but this is (I guess) enough for most things like an
instance that had installcheck run on before the upgrade with a dump
generated from it.
Note that the buildfarm code has taken the simplest approach of just
dropping "tab_core_types", so what we have here is more modular.
Author: Anton A. Melnikov
Discussion: https://postgr.es/m/49f389ba-95ce-8a9b-09ae-f60650c0e7c7@inbox.ru
The query used to disable WITH OIDS in all the relations making use of
it was checking for materialized views, but this is not a supported
operation. On the contrary, this needs to be done on foreign tables.
While on it, use quote_ident() in the ALTER TABLE strings built on the
relation name.
Author: Anton A. Melnikov, Michael Paquier
Discussion: https://postgr.es/m/49f389ba-95ce-8a9b-09ae-f60650c0e7c7@inbox.ru
Backpatch-through: 12
Three error strings used with cache lookup failures were referring to
incorrect object types for ACL checks:
- Schemas
- Types
- Foreign Servers
There errors should never be triggered, but if they do incorrect
information would be reported.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20221222153041.GN1153@telsasoft.com
Backpatch-through: 11
The former name was discussed as being confusing, so use "split", as per
a suggestion from Magnus Hagander.
While on it, one of the output arguments is renamed from "segno" to
"segment_number", as per a suggestion from Kyotaro Horiguchi.
The documentation is updated to reflect all these changes.
Bump catalog version.
Author: Bharath Rupireddy, Michael Paquier
Discussion: https://postgr.es/m/CABUevEytQVaOOhGdoh0D7hGwe3fuKcRF6NthsSW7ww04EmtFgQ@mail.gmail.com
WindowFuncs such as row_number() don't care if it's called with ROWS
UNBOUNDED PRECEDING AND CURRENT ROW or with RANGE UNBOUNDED PRECEDING AND
CURRENT ROW. The latter is less efficient as the RANGE option requires
that the executor check for peer rows, so using the ROW option instead
would cause less overhead. Because RANGE is part of the default frame
options for WindowClauses, it means WindowAgg is, by default, working much
harder than it needs to for window functions where the ROWS / RANGE option
has no effect on the window function's result.
On a test query from the discussion thread, a performance improvement of
344% was seen by using ROWS instead of RANGE.
Here we add a new support function node type to allow support functions to
be called for window functions so that the most optimal version of the
frame options can be set. The planner has been adjusted so that the frame
options are changed only if all window functions sharing the same window
clause agree on what the optimized frame options are.
Here we give the ability for row_number(), rank(), dense_rank(),
percent_rank(), cume_dist() and ntile() to alter their WindowClause's
frameOptions.
Reviewed-by: Vik Fearing, Erwin Brandstetter, Zhihong Yu
Discussion: https://postgr.es/m/CAGHENJ7LBBszxS+SkWWFVnBmOT2oVsBhDMB1DFrgerCeYa_DyA@mail.gmail.com
Discussion: https://postgr.es/m/CAApHDvohAKEtTXxq7Pc-ic2dKT8oZfbRKeEJP64M0B6+S88z+A@mail.gmail.com
Use C99 designated initializer syntax for the array elements, instead of
writing the enumerator name and position in a comment. Replace nkeys
and key with a local variadic macro, for a shorter notation.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/CA%2BhUKGKdpDjKL2jgC-GpoL4DGZU1YPqnOFHbDqFkfRQcPaR5DQ%40mail.gmail.com
Perform a failsafe check every time VACUUM's first heap scan scans a
further FAILSAFE_EVERY_PAGES pages, rather than using an approach based
on the number of physical blocks that our current blkno is from the
blkno at the time of the previous failsafe check. That way VACUUM will
perform a failsafe check every time it has scanned a uniform number of
pages, without it mattering when or how VACUUM skipped pages using the
visibility map.
Sami Imseih, with changes to FAILSAFE_EVERY_PAGES comments added by me.
Author: Sami Imseih <simseih@amazon.com>
Reviewed-By: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/401CE010-4049-4B94-9961-0B610A5D254D%40amazon.com
Use a dedicated struct for the XID/MXID cutoffs used by VACUUM, such as
FreezeLimit and OldestXmin. This state is initialized in vacuum.c, and
then passed around by code from vacuumlazy.c to heapam.c freezing
related routines. The new convention is that everybody works off of the
same cutoff state, which is passed around via pointers to const.
Also simplify some of the logic for dealing with frozen xmin in
heap_prepare_freeze_tuple: add dedicated "xmin_already_frozen" state to
clearly distinguish xmin XIDs that we're going to freeze from those that
were already frozen from before. That way the routine's xmin handling
code is symmetrical with the existing xmax handling code. This is
preparation for an upcoming commit that will add page level freezing.
Also refactor the control flow within FreezeMultiXactId(), while adding
stricter sanity checks. We now test OldestXmin directly, instead of
using FreezeLimit as an inexact proxy for OldestXmin. This is further
preparation for the page level freezing work, which will make the
function's caller cede control of page level freezing to the function
where appropriate (where heap_prepare_freeze_tuple sees a tuple that
happens to contain a MultiXactId in its xmax).
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Jeff Davis <pgsql@j-davis.com>
Discussion: https://postgr.es/m/CAH2-WznS9TxXmz2_=SY+SyJyDFbiOftKofM9=aDo68BbXNBUMA@mail.gmail.com
perform_pullup_replace_vars() knows how to scan the whole parent
query tree when we are replacing Vars during a subquery flattening
operation. However, for the specific case of flattening a
UNION ALL leaf query, that's mostly wasted work: the only place
where relevant Vars could exist is in the AppendRelInfo that we
just made for this leaf. Teaching perform_pullup_replace_vars()
to just deal with that and exit is worthwhile because, if we have
N such subqueries to pull up, we were spending O(N^2) work uselessly
mutating the AppendRelInfos for all the other subqueries.
While we're at it, avoid calling substitute_phv_relids if there are no
PlaceHolderVars, and remove an obsolete check of parse->hasSubLinks.
Andrey Lepikhov and Tom Lane
Discussion: https://postgr.es/m/703c09a2-08f3-d2ec-b33d-dbecd62428b8@postgrespro.ru
Andrey Lepikhov demonstrated a case where we spend an unreasonable
amount of time in pull_up_subqueries(). Not only is that recursing
with no explicit check for stack overrun, but the code seems not
interruptable by control-C. Let's stick a CHECK_FOR_INTERRUPTS
there, along with sprinkling some stack depth checks.
An actual fix for the excessive time consumption seems a bit
risky to back-patch; but this isn't, so let's do so.
Discussion: https://postgr.es/m/703c09a2-08f3-d2ec-b33d-dbecd62428b8@postgrespro.ru
The previous coding of VA_ARGS_NARGS() always returned 1 on Visual
Studio, because it treats __VA_ARGS__ as a single token unless you jump
through extra hoops. Newer compilers have an option to fix that. Add a
comment about that so that we can remember to clean this up in the
future when our minimum MSVC version advances.
Author: Victor Spirin <v.spirin@postgrespro.ru>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/f450fc57-a147-19d0-e50c-33571c52cc13%40postgrespro.ru
A bitwise operator was getting used on two bools in
ATAddCheckConstraint() to track if constraints should be merged or not
with the existing ones of a relation, though obviously this should use
a boolean OR operator. This led to the same result, but let's be
clean.
Oversight in 074c5cf.
Author: Ranier Vilela
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/CAEudQAp2R2fbbi0OHHhv_n4=Ch0t1VtjObR9YMqtGKHJ+faUFQ@mail.gmail.com
This introduces palloc_aligned() and MemoryContextAllocAligned() which
allow callers to obtain memory which is allocated to the given size and
also aligned to the specified alignment boundary. The alignment
boundaries may be any power-of-2 value. Currently, the alignment is
capped at 2^26, however, we don't expect values anything like that large.
The primary expected use case is to align allocations to perhaps CPU
cache line size or to maybe I/O page size. Certain use cases can benefit
from having aligned memory by either having better performance or more
predictable performance.
The alignment is achieved by requesting 'alignto' additional bytes from
the underlying allocator function and then aligning the address that is
returned to the requested alignment. This obviously does waste some
memory, so alignments should be kept as small as what is required.
It's also important to note that these alignment bytes eat into the
maximum allocation size. So something like:
palloc_aligned(MaxAllocSize, 64, 0);
will not work as we cannot request MaxAllocSize + 64 bytes.
Additionally, because we're just requesting the requested size plus the
alignment requirements from the given MemoryContext, if that context is
the Slab allocator, then since slab can only provide chunks of the size
that's specified when the slab context is created, then this is not going
to work. Slab will generate an error to indicate that the requested size
is not supported.
The alignment that is requested in palloc_aligned() is stored along with
the allocated memory. This allows the alignment to remain intact through
repalloc() calls.
Author: Andres Freund, David Rowley
Reviewed-by: Maxim Orlov, Andres Freund, John Naylor
Discussion: https://postgr.es/m/CAApHDvpxLPUMV1mhxs6g7GNwCP6Cs6hfnYQL5ffJQTuFAuxt8A%40mail.gmail.com
seg stores the number of significant digits in an input number
in a "char" field. If char is signed, and the input is more than
127 digits long, the count can read out as negative causing
seg_out() to print garbage (or, if you're really unlucky,
even crash).
To fix, clamp the digit count to be not more than FLT_DIG.
(In theory this loses some information about what the original
input was, but it doesn't seem like useful information; it would
not survive dump/restore in any case.)
Also, in case there are stored values of the seg type containing
bad data, add a clamp in seg_out's restore() subroutine.
Per bug #17725 from Robins Tharakan. It's been like this
forever, so back-patch to all supported branches.
Discussion: https://postgr.es/m/17725-0a09313b67fbe86e@postgresql.org
This is the guts of float4in, callable as a routine to input floats,
which will be useful in an upcoming patch for allowing soft errors in
the seg module's input function.
A similar operation was performed some years ago for float8in in
commit 50861cd683.
Reviewed by Tom Lane
Discussion: https://postgr.es/m/cee4e426-d014-c0b7-aa22-a659f2cd9130@dunslane.net
d21ded75f changed the way slab.c works but introduced a bug that meant we
could end up with the slab's curBlocklistIndex pointing to the wrong list.
The condition which was checking for this was failing to account for two
things:
1. The curBlocklistIndex could be 0 as we've currently got no non-full
blocks to put chunks on. In this case, the dlist_is_empty() check cannot
be performed as there can be any number of completely full blocks at that
index.
2. The curBlocklistIndex may be greater than the index we just moved the
block onto. Since we need to ensure we fill up fuller blocks first, we
must reset curBlocklistIndex when changing any blocklist element that's
less than the curBlocklistIndex too.
Reported-by: Takamichi Osumi
Discussion: https://postgr.es/m/TYCPR01MB8373329C6329768D7E093D68EDEB9@TYCPR01MB8373.jpnprd01.prod.outlook.com
This commit changes some of the bbstreamer files and pg_dump to use the
same style as a few other places (like common/compression.c), where the
name of the compression method is not part of the string, but an
argument of it. This reduces a bit the translation work with less
string patterns.
Discussion: https://postgr.es/m/Y5/5tdK+4n3clvtU@paquier.xyz
This shaves some code by replacing the combinations of
CreateTemplateTupleDesc()/TupleDescInitEntry() hardcoding a mapping of
the attributes listed in pg_proc.dat by get_call_result_type() to build
the TupleDesc needed for the rows generated.
get_call_result_type() is more expensive than the former style, but this
removes some duplication with the lists of OUT parameters (pg_proc.dat
and the attributes hardcoded in these code paths). This is applied to
functions that are not considered as critical (aka that could be called
repeatedly for monitoring purposes).
Author: Bharath Rupireddy
Reviewed-by: Robert Haas, Álvaro Herrera, Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/CALj2ACV23HW5HP5hFjd89FNS-z5X8r2jNXdMXcpN2BgTtKd87w@mail.gmail.com
Commit 927f453a9 disallowed batching added by commit b663a4136 to be
used for the inserts performed as part of cross-partition updates of
partitioned tables, mainly because the previous code in
nodeModifyTable.c couldn't handle pending inserts into foreign-table
partitions that are also UPDATE target partitions. But we don't have
such a limitation anymore (cf. commit ffbb7e65a), so let's allow for
this by removing from execPartition.c the restriction added by commit
927f453a9 that batching is only allowed if the query command type is
CMD_INSERT.
In postgres_fdw, since commit 86dc90056 changed it to effectively
disable cross-partition updates in the case where a foreign-table
partition chosen to insert rows into is also an UPDATE target partition,
allow batching in the case where a foreign-table partition chosen to
do so is *not* also an UPDATE target partition. This is enabled by the
"batch_size" option added by commit b663a4136, which is disabled by
default.
This patch also adjusts the test case added by commit 927f453a9 to
confirm that the inserts performed as part of a cross-partition update
of a partitioned table indeed uses batching.
Amit Langote, reviewed and/or tested by Georgios Kokolatos, Zhihong Yu,
Bharath Rupireddy, Hou Zhijie, Vignesh C, and me.
Discussion: http://postgr.es/m/CA%2BHiwqH1Lz1yJmPs%3DaD-pzd_HLLynLHvq5iYeT9mB0bBV7oJ6w%40mail.gmail.com
1349d279 added query planner support to allow more efficient execution of
aggregate functions which have an ORDER BY or a DISTINCT clause. Prior to
that commit, the planner would only request that the lower planner produce
a plan with the order required for the GROUP BY clause and it would be
left up to nodeAgg.c to perform the final sort of records within each
group so that the aggregate transition functions were called in the
correct order. Now that the planner requests the lower planner produce a
plan with the GROUP BY and the ORDER BY / DISTINCT aggregates in mind,
there is the possibility that the planner chooses a plan which could be
less efficient than what would have been produced before 1349d279.
While developing 1349d279, I had in mind that Incremental Sort would help
us in cases where an index exists only on the GROUP BY column(s).
Incremental Sort would just replace the implicit tuplesorts which are
being performed in nodeAgg.c. However, because the planner has the
flexibility to instead choose a plan which just performs a full sort on
both the GROUP BY and ORDER BY / DISTINCT aggregate columns, there is
potential for the planner to make a bad choice. The costing for
Incremental Sort is not perfect as it assumes an even distribution of rows
to sort within each sort group.
Here we add an escape hatch in the form of the enable_presorted_aggregate
GUC. This will allow users to get the pre-PG16 behavior in cases where
they have no other means to convince the query planner to produce a plan
which only sorts on the GROUP BY column(s).
Discussion: https://postgr.es/m/CAApHDvr1Sm+g9hbv4REOVuvQKeDWXcKUAhmbK5K+dfun0s9CvA@mail.gmail.com
Slab has traditionally been fairly slow when compared with the AllocSet or
Generation memory allocators. Part of this slowness came from having to
write out an entire block when we allocate a new block in order to
populate the free list indexes within the block's memory. Additional
slowness came from having to move a block onto another dlist each time we
palloc or pfree a chunk from it.
Here we optimize both of those cases and do a little bit extra to improve
the performance of the slab allocator.
Here, instead of writing out the free list indexes when allocating a new
block, we introduce the concept of "unused" chunks. When a block is first
allocated all chunks are unused. These chunks only make it onto the
free list when they are pfree'd. When allocating new chunks on an
existing block, we have the choice of consuming a chunk from the free list
or an unused chunk. When both exist, we opt to use one from the free
list, as these have been used already and the memory of them is more
likely to be cached by the CPU.
Here we also reduce the number of block lists from there being one for
every possible value of free chunks on a block to just having a small
fixed number of block lists. We keep the 0th block list for completely
full blocks and anything else stores blocks for some range of free chunks
with fuller blocks appearing on lower block list array elements. This
reduces how often we must move a block to another list when we allocate or
free chunks, but still allows us to prefer to put new chunks on fuller
blocks and perhaps allow blocks with fewer chunks to be free'd later
once all their remaining chunks have been pfree'd.
Additionally, we now store a list of "emptyblocks", which are blocks that
no longer contain any allocated chunks. We now keep up to 10 of these
around to avoid having to thrash malloc/free when allocation patterns
continually cause blocks to become free of any allocated chunks only to
allocate more chunks again. Now only once we have 10 of these, we free
the block. This does raise the high water mark for the total memory that
a slab context can consume. It does not seem entirely unreasonable that
we might one day want to make this a property of SlabContext rather than a
compile-time constant. Let's wait and see if there is any evidence to
support that this is required before doing it.
Author: Andres Freund, David Rowley
Tested-by: Tomas Vondra, John Naylor
Discussion: https://postgr.es/m/20210717194333.mr5io3zup3kxahfm@alap3.anarazel.de
This function takes in input a WAL segment name and returns a tuple made
of the segment sequence number (dependent on the WAL segment size of the
cluster) and its timeline, as of a thin SQL wrapper around the existing
XLogFromFileName().
This function has multiple usages, like being able to compile a LSN from
a file name and an offset, or finding the timeline of a segment without
having to do to some maths based on the first eight characters of the
segment.
Bump catalog version.
Author: Bharath Rupireddy
Reviewed-by: Nathan Bossart, Kyotaro Horiguchi, Maxim Orlov, Michael
Paquier
Discussion: https://postgr.es/m/CALj2ACWV=FCddsxcGbVOA=cvPyMr75YCFbSQT6g4KDj=gcJK4g@mail.gmail.com
SCRAM_KEY_LEN was a variable used in the internal routines of SCRAM to
size a set of fixed-sized arrays used in the SHA and HMAC computations
during the SASL exchange or when building a SCRAM password. This had a
hard dependency on SHA-256, reducing the flexibility of SCRAM when it
comes to the addition of more hash methods. A second issue was that
SHA-256 is assumed as the cryptohash method to use all the time.
This commit renames SCRAM_KEY_LEN to a more generic SCRAM_KEY_MAX_LEN,
which is used as the size of the buffers used by the internal routines
of SCRAM. This is aimed at tracking centrally the maximum size
necessary for all the hash methods supported by SCRAM. A global
variable has the advantage of keeping the code in its simplest form,
reducing the need of more alloc/free logic for all the buffers used in
the hash calculations.
A second change is that the key length (SHA digest length) and hash
types are now tracked by the state data in the backend and the frontend,
the common portions being extended to handle these as arguments by the
internal routines of SCRAM. There are a few RFC proposals floating
around to extend the SCRAM protocol, including some to use stronger
cryptohash algorithms, so this lifts some of the existing restrictions
in the code.
The code in charge of parsing and building SCRAM secrets is extended to
rely on the key length and on the cryptohash type used for the exchange,
assuming currently that only SHA-256 is supported for the moment. Note
that the mock authentication simply enforces SHA-256.
Author: Michael Paquier
Reviewed-by: Peter Eisentraut, Jonathan Katz
Discussion: https://postgr.es/m/Y5k3Qiweo/1g9CG6@paquier.xyz
A new function pg_stat_get_backend_subxact() can be used to get
information about the number of subtransactions in the cache of
a particular backend and whether that cache has overflowed. This
can be useful for tracking down performance problems that can
result from overflowed snapshots.
Dilip Kumar, reviewed by Zhihong Yu, Nikolay Samokhvalov,
Justin Pryzby, Nathan Bossart, Ashutosh Sharma, Julien
Rouhaud. Additional design comments from Andres Freund,
Tom Lane, Bruce Momjian, and David G. Johnston.
Discussion: http://postgr.es/m/CAFiTN-ut0uwkRJDQJeDPXpVyTWD46m3gt3JDToE02hTfONEN=Q@mail.gmail.com
While fooling with my pet outer-join-variables patch, I discovered
that the test case I added in commit 11086f2f2 no longer demonstrates
what it's supposed to. The idea is to tempt the planner to reverse
the order of the two outer joins, which would leave noplace to
correctly evaluate the WHERE clause that's inserted between them.
Before the addition of the delay_upper_joins mechanism, it would
have taken the bait.
However, subsequent improvements broke the test in two different ways.
First, we now recognize the IS NULL coding pattern as an antijoin, and
we won't re-order antijoins; even if we did, the IS NULL test clauses
get removed so there would be no opportunity for them to misbehave.
Second, the planner now discovers that nested parameterized indexscans
are a lot cheaper than the double hash join it used back in the day,
and that approach doesn't want to re-order the joins anyway. Thus,
in HEAD the test passes even if one dikes out delay_upper_joins.
To fix, change the IS NULL tests to COALESCE clauses, which produce
the same results but the planner isn't smart enough to convert them
to antijoins. It'll still go for parameterized indexscans though,
so drop the index enabling that (don't know why I added that in the
first place), and disable nestloop joining just to be sure.
This time around, add an EXPLAIN to make the choice of plan visible.
Such references failed with "cache lookup failed for type 0"
because we didn't resolve the type of the CYCLE column until after
analyzing the CTE's query. We can just move that processing
to before the recursive parse_sub_analyze call, though.
While here, invent a couple of local variables to make this
code less egregiously wider-than-80-columns.
Per bug #17723 from Vik Fearing. Back-patch to v14 where
the CYCLE feature was added.
Discussion: https://postgr.es/m/17723-2c4985ff111e7bba@postgresql.org
The environment variable PG_TEST_PG_UPGRADE_MODE can be set to
override the default transfer mode for the pg_upgrade tests.
(Automatically running the pg_upgrade tests for all supported modes
would be too slow.)
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/50a97009-8ff9-ca4d-a0f6-6086a6775a5b%40enterprisedb.com
Amit Kapila