In order to troubleshoot misbehaving or buggy event triggers, the
documented advice is to enter single-user mode. In an attempt to
reduce the number of situations where single-user mode is required
(or even recommended) for non-extraordinary maintenance, this GUC
allows to temporarily suspend event triggers.
This was originally extracted from a larger patchset which aimed
at supporting event triggers on login events.
Reviewed-by: Ted Yu <yuzhihong@gmail.com>
Reviewed-by: Mikhail Gribkov <youzhick@gmail.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/9140106E-F9BF-4D85-8FC8-F2D3C094A6D9@yesql.se
Discussion: https://postgr.es/m/0d46d29f-4558-3af9-9c85-7774e14a7709@postgrespro.ru
vacuum_defer_cleanup_age was introduced before hot_standby_feedback and
replication slots existed. It is hard to use reasonably - commonly it will
either be set too low (not preventing recovery conflicts, while still causing
some bloat), or too high (causing a lot of bloat). The alternatives do not
have that issue.
That on its own might not be sufficient reason to remove
vacuum_defer_cleanup_age, but it also complicates computation of xid
horizons. See e.g. the bug fixed in be504a3e974. It also is untested.
This commit removes TransactionIdRetreatSafely(), as there are no users
anymore. There might be potential future users, hence noting that here.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20230317230930.nhsgk3qfk7f4axls@awork3.anarazel.de
This reverts commit 3d03b24c3 (Revert Add support for Kerberos
credential delegation) which was committed on the grounds of concern
about portability, but on further review and discussion, it's clear that
we are better off explicitly requiring MIT Kerberos as that appears to
be the only GSSAPI library currently that's under proper maintenance
and ongoing development. The API used for storing credentials was added
to MIT Kerberos over a decade ago while for the other libraries which
appear to be mainly based on Heimdal, which exists explicitly to be a
re-implementation of MIT Kerberos, the API never made it to a released
version (even though it was added to the Heimdal git repo over 5 years
ago..).
This post-feature-freeze change was approved by the RMT.
Discussion: https://postgr.es/m/ZDDO6jaESKaBgej0%40tamriel.snowman.net
This reverts commit 3d4fa227bce4294ce1cc214b4a9d3b7caa3f0454.
Per discussion and buildfarm, this depends on APIs that seem to not
be available on at least one platform (NetBSD). Should be certainly
possible to rework to be optional on that platform if necessary but bit
late for that at this point.
Discussion: https://postgr.es/m/3286097.1680922218@sss.pgh.pa.us
Support GSSAPI/Kerberos credentials being delegated to the server by a
client. With this, a user authenticating to PostgreSQL using Kerberos
(GSSAPI) credentials can choose to delegate their credentials to the
PostgreSQL server (which can choose to accept them, or not), allowing
the server to then use those delegated credentials to connect to
another service, such as with postgres_fdw or dblink or theoretically
any other service which is able to be authenticated using Kerberos.
Both postgres_fdw and dblink are changed to allow non-superuser
password-less connections but only when GSSAPI credentials have been
delegated to the server by the client and GSSAPI is used to
authenticate to the remote system.
Authors: Stephen Frost, Peifeng Qiu
Reviewed-By: David Christensen
Discussion: https://postgr.es/m/CO1PR05MB8023CC2CB575E0FAAD7DF4F8A8E29@CO1PR05MB8023.namprd05.prod.outlook.com
Add new options to the VACUUM and ANALYZE commands called
BUFFER_USAGE_LIMIT to allow users more control over how large to make the
buffer access strategy that is used to limit the usage of buffers in
shared buffers. Larger rings can allow VACUUM to run more quickly but
have the drawback of VACUUM possibly evicting more buffers from shared
buffers that might be useful for other queries running on the database.
Here we also add a new GUC named vacuum_buffer_usage_limit which controls
how large to make the access strategy when it's not specified in the
VACUUM/ANALYZE command. This defaults to 256KB, which is the same size as
the access strategy was prior to this change. This setting also
controls how large to make the buffer access strategy for autovacuum.
Per idea by Andres Freund.
Author: Melanie Plageman
Reviewed-by: David Rowley
Reviewed-by: Andres Freund
Reviewed-by: Justin Pryzby
Reviewed-by: Bharath Rupireddy
Discussion: https://postgr.es/m/20230111182720.ejifsclfwymw2reb@awork3.anarazel.de
For ICU collations, ensure that the locale's language exists in ICU,
and that the locale can be opened.
Basic validation helps avoid minor mistakes and misspellings, which
often fall back to the root locale instead of the intended
locale. It's even more important to avoid such mistakes in ICU
versions 54 and earlier, where the same (misspelled) locale string
could fall back to different locales depending on the environment.
Discussion: https://postgr.es/m/11b1eeb7e7667fdd4178497aeb796c48d26e69b9.camel@j-davis.com
Discussion: https://postgr.es/m/df2efad0cae7c65180df8e5ebb709e5eb4f2a82b.camel@j-davis.com
Reviewed-by: Peter Eisentraut
Replace the hardcoded value with a GUC such that the iteration
count can be raised in order to increase protection against
brute-force attacks. The hardcoded value for SCRAM iteration
count was defined to be 4096, which is taken from RFC 7677, so
set the default for the GUC to 4096 to match. In RFC 7677 the
recommendation is at least 15000 iterations but 4096 is listed
as a SHOULD requirement given that it's estimated to yield a
0.5s processing time on a mobile handset of the time of RFC
writing (late 2015).
Raising the iteration count of SCRAM will make stored passwords
more resilient to brute-force attacks at a higher computational
cost during connection establishment. Lowering the count will
reduce computational overhead during connections at the tradeoff
of reducing strength against brute-force attacks.
There are however platforms where even a modest iteration count
yields a too high computational overhead, with weaker password
encryption schemes chosen as a result. In these situations,
SCRAM with a very low iteration count still gives benefits over
weaker schemes like md5, so we allow the iteration count to be
set to one at the low end.
The new GUC is intentionally generically named such that it can
be made to support future SCRAM standards should they emerge.
At that point the value can be made into key:value pairs with
an undefined key as a default which will be backwards compatible
with this.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Jonathan S. Katz <jkatz@postgresql.org>
Discussion: https://postgr.es/m/F72E7BC7-189F-4B17-BF47-9735EB72C364@yesql.se
This reverts commit 4d417992613949af35530b4e8e83670c4e67e1b2. Broad
concerns about regressions caused by eager freezing strategy have been
raised. Whether or not these concerns can be worked through in any time
frame is far from certain.
Discussion: https://postgr.es/m/20230126004347.gepcmyenk2csxrri@awork3.anarazel.de
Eager freezing strategy avoids large build-ups of all-visible pages. It
makes VACUUM trigger page-level freezing whenever doing so will enable
the page to become all-frozen in the visibility map. This is useful for
tables that experience continual growth, particularly strict append-only
tables such as pgbench's history table. Eager freezing significantly
improves performance stability by spreading out the cost of freezing
over time, rather than doing most freezing during aggressive VACUUMs.
It complements the insert autovacuum mechanism added by commit b07642db.
VACUUM determines its freezing strategy based on the value of the new
vacuum_freeze_strategy_threshold GUC (or reloption) with logged tables.
Tables that exceed the size threshold use the eager freezing strategy.
Unlogged tables and temp tables always use eager freezing strategy,
since the added cost is negligible there. Non-permanent relations won't
incur any extra overhead in WAL written (for the obvious reason), nor in
pages dirtied (since any extra freezing will only take place on pages
whose PD_ALL_VISIBLE bit needed to be set either way).
VACUUM uses lazy freezing strategy for logged tables that fall under the
GUC size threshold. Page-level freezing triggers based on the criteria
established in commit 1de58df4, which added basic page-level freezing.
Eager freezing is strictly more aggressive than lazy freezing. Settings
like vacuum_freeze_min_age still get applied in just the same way in
every VACUUM, independent of the strategy in use. The only mechanical
difference between eager and lazy freezing strategies is that only the
former applies its own additional criteria to trigger freezing pages.
Note that even lazy freezing strategy will trigger freezing whenever a
page happens to have required that an FPI be written during pruning,
provided that the page will thereby become all-frozen in the visibility
map afterwards (due to the FPI optimization from commit 1de58df4).
The vacuum_freeze_strategy_threshold default setting is 4GB. This is a
relatively low setting that prioritizes performance stability. It will
be reviewed at the end of the Postgres 16 beta period.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Jeff Davis <pgsql@j-davis.com>
Reviewed-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/CAH2-WzkFok_6EAHuK39GaW4FjEFQsY=3J0AAd6FXk93u-Xq3Fg@mail.gmail.com
This provides a way to reserve connection slots for non-superusers.
The slots reserved via the new GUC are available only to users who
have the new predefined role pg_use_reserved_connections.
superuser_reserved_connections remains as a final reserve in case
reserved_connections has been exhausted.
Patch by Nathan Bossart. Reviewed by Tushar Ahuja and by me.
Discussion: http://postgr.es/m/20230119194601.GA4105788@nathanxps13
Can be set to the empty string, or to either or both of "set" or
"inherit". If set to a non-empty value, a non-superuser who creates
a role (necessarily by relying up the CREATEROLE privilege) will
grant that role back to themselves with the specified options.
This isn't a security feature, because the grant that this feature
triggers can also be performed explicitly. Instead, it's a user experience
feature. A superuser would necessarily inherit the privileges of any
created role and be able to access all such roles via SET ROLE;
with this patch, you can configure createrole_self_grant = 'set, inherit'
to provide a similar experience for a user who has CREATEROLE but not
SUPERUSER.
Discussion: https://postgr.es/m/CA+TgmobN59ct+Emmz6ig1Nua2Q-_o=r6DSD98KfU53kctq_kQw@mail.gmail.com
Currently, for large transactions, the publisher sends the data in
multiple streams (changes divided into chunks depending upon
logical_decoding_work_mem), and then on the subscriber-side, the apply
worker writes the changes into temporary files and once it receives the
commit, it reads from those files and applies the entire transaction. To
improve the performance of such transactions, we can instead allow them to
be applied via parallel workers.
In this approach, we assign a new parallel apply worker (if available) as
soon as the xact's first stream is received and the leader apply worker
will send changes to this new worker via shared memory. The parallel apply
worker will directly apply the change instead of writing it to temporary
files. However, if the leader apply worker times out while attempting to
send a message to the parallel apply worker, it will switch to
"partial serialize" mode - in this mode, the leader serializes all
remaining changes to a file and notifies the parallel apply workers to
read and apply them at the end of the transaction. We use a non-blocking
way to send the messages from the leader apply worker to the parallel
apply to avoid deadlocks. We keep this parallel apply assigned till the
transaction commit is received and also wait for the worker to finish at
commit. This preserves commit ordering and avoid writing to and reading
from files in most cases. We still need to spill if there is no worker
available.
This patch also extends the SUBSCRIPTION 'streaming' parameter so that the
user can control whether to apply the streaming transaction in a parallel
apply worker or spill the change to disk. The user can set the streaming
parameter to 'on/off', or 'parallel'. The parameter value 'parallel' means
the streaming will be applied via a parallel apply worker, if available.
The parameter value 'on' means the streaming transaction will be spilled
to disk. The default value is 'off' (same as current behaviour).
In addition, the patch extends the logical replication STREAM_ABORT
message so that abort_lsn and abort_time can also be sent which can be
used to update the replication origin in parallel apply worker when the
streaming transaction is aborted. Because this message extension is needed
to support parallel streaming, parallel streaming is not supported for
publications on servers < PG16.
Author: Hou Zhijie, Wang wei, Amit Kapila with design inputs from Sawada Masahiko
Reviewed-by: Sawada Masahiko, Peter Smith, Dilip Kumar, Shi yu, Kuroda Hayato, Shveta Mallik
Discussion: https://postgr.es/m/CAA4eK1+wyN6zpaHUkCLorEWNx75MG0xhMwcFhvjqm2KURZEAGw@mail.gmail.com
1349d279 added query planner support to allow more efficient execution of
aggregate functions which have an ORDER BY or a DISTINCT clause. Prior to
that commit, the planner would only request that the lower planner produce
a plan with the order required for the GROUP BY clause and it would be
left up to nodeAgg.c to perform the final sort of records within each
group so that the aggregate transition functions were called in the
correct order. Now that the planner requests the lower planner produce a
plan with the GROUP BY and the ORDER BY / DISTINCT aggregates in mind,
there is the possibility that the planner chooses a plan which could be
less efficient than what would have been produced before 1349d279.
While developing 1349d279, I had in mind that Incremental Sort would help
us in cases where an index exists only on the GROUP BY column(s).
Incremental Sort would just replace the implicit tuplesorts which are
being performed in nodeAgg.c. However, because the planner has the
flexibility to instead choose a plan which just performs a full sort on
both the GROUP BY and ORDER BY / DISTINCT aggregate columns, there is
potential for the planner to make a bad choice. The costing for
Incremental Sort is not perfect as it assumes an even distribution of rows
to sort within each sort group.
Here we add an escape hatch in the form of the enable_presorted_aggregate
GUC. This will allow users to get the pre-PG16 behavior in cases where
they have no other means to convince the query planner to produce a plan
which only sorts on the GROUP BY column(s).
Discussion: https://postgr.es/m/CAApHDvr1Sm+g9hbv4REOVuvQKeDWXcKUAhmbK5K+dfun0s9CvA@mail.gmail.com
Previously, an idle startup (recovery) process would wake up every 5
seconds to have a chance to poll for promote_trigger_file, even if that
GUC was not configured. That promotion triggering mechanism was
effectively superseded by pg_ctl promote and pg_promote() a long time
ago. There probably aren't many users left and it's very easy to change
to the modern mechanisms, so we agreed to remove the feature.
This is part of a campaign to reduce wakeups on idle systems.
Author: Simon Riggs <simon.riggs@enterprisedb.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Ian Lawrence Barwick <barwick@gmail.com>
Discussion: https://postgr.es/m/CANbhV-FsjnzVOQGBpQ589%3DnWuL1Ex0Ykn74Nh1hEjp2usZSR5g%40mail.gmail.com
This reverts commit db0d67db2401eb6238ccc04c6407a4fd4f985832 and
several follow-on fixes. The idea of making a cost-based choice
of the order of the sorting columns is not fundamentally unsound,
but it requires cost information and data statistics that we don't
really have. For example, relying on procost to distinguish the
relative costs of different sort comparators is pretty pointless
so long as most such comparator functions are labeled with cost 1.0.
Moreover, estimating the number of comparisons done by Quicksort
requires more than just an estimate of the number of distinct values
in the input: you also need some idea of the sizes of the larger
groups, if you want an estimate that's good to better than a factor of
three or so. That's data that's often unknown or not very reliable.
Worse, to arrive at estimates of the number of calls made to the
lower-order-column comparison functions, the code needs to make
estimates of the numbers of distinct values of multiple columns,
which are necessarily even less trustworthy than per-column stats.
Even if all the inputs are perfectly reliable, the cost algorithm
as-implemented cannot offer useful information about how to order
sorting columns beyond the point at which the average group size
is estimated to drop to 1.
Close inspection of the code added by db0d67db2 shows that there
are also multiple small bugs. These could have been fixed, but
there's not much point if we don't trust the estimates to be
accurate in-principle.
Finally, the changes in cost_sort's behavior made for very large
changes (often a factor of 2 or so) in the cost estimates for all
sorting operations, not only those for multi-column GROUP BY.
That naturally changes plan choices in many situations, and there's
precious little evidence to show that the changes are for the better.
Given the above doubts about whether the new estimates are really
trustworthy, it's hard to summon much confidence that these changes
are better on the average.
Since we're hard up against the release deadline for v15, let's
revert these changes for now. We can always try again later.
Note: in v15, I left T_PathKeyInfo in place in nodes.h even though
it's unreferenced. Removing it would be an ABI break, and it seems
a bit late in the release cycle for that.
Discussion: https://postgr.es/m/TYAPR01MB586665EB5FB2C3807E893941F5579@TYAPR01MB5866.jpnprd01.prod.outlook.com
Referring to the WAL as just "log" invites confusion with the
postmaster log, so avoid doing that in docs and error messages.
Also shorten "WAL segment file" to just "WAL file" in various
places.
Bharath Rupireddy, reviewed by Nathan Bossart and Kyotaro Horiguchi
Discussion: https://postgr.es/m/CALj2ACUeXa8tDPaiTLexBDMZ7hgvaN+RTb957-cn5qwv9zf-MQ@mail.gmail.com
This commit addresses a few things around GUCs:
- The TCP-related parameters (the four tcp_keepalives_* and
client_connection_check_interval are listed in postgresql.conf.sample in
a subsection called "TCP settings" of "CONNECTIONS AND AUTHENTICATION",
but they did not have their own group name in guc.c.
- enable_group_by_reordering, stats_fetch_consistency and
recovery_prefetch had an inconsistent description, missing a dot at the
end.
- In postgresql.conf.sample, "Process title" should not have a section
of its own, but it should be a subsection of "REPORTING AND LOGGING".
This impacts the contents of pg_settings, which could be seen as a
compatibility break, so no backpatch is done. This is similar to the
cleanup done in a55a984.
Author: Shinya Kato
Discussion: https://postgr.es/m/5e0c9c608624eafbba910c344282cb14@oss.nttdata.com
POSIX shm_open() can sleep for a long time and fail spuriously because
of contention on an internal lock file on Solaris (and presumably
illumos). Commit 389869af fixed the main problem with this, namely that
we could crash, but it's now clear that "posix" is not a good default.
Therefore, choose "sysv" at initdb time on Solaris and illumos. Other
choices are still available by editing the postgresql.conf file.
Back-patch only to 15, because contention is much less likely further
back, and it doesn't seem like a good idea to change this in released
branches. This should clear up the failures on build farm animal
margay.
Discussion: https://postgr.es/m/CA%2BhUKGKqKrCV5xKWfh9rnm%3Do%3DDwZLTLtnsj_XpUi9g5%3DV%2B9oyg%40mail.gmail.com
Mistake in 5891c7a8ed8, likely made when switching the default value from none
to fetch during development.
Reported-By: Nathan Bossart <nathandbossart@gmail.com>
Author: Nathan Bossart <nathandbossart@gmail.com>
Discussion: https://postgr.es/m/20220524220147.GA1298892@nathanxps13
Introduce a new GUC recovery_prefetch. When enabled, look ahead in the
WAL and try to initiate asynchronous reading of referenced data blocks
that are not yet cached in our buffer pool. For now, this is done with
posix_fadvise(), which has several caveats. Since not all OSes have
that system call, "try" is provided so that it can be enabled where
available. Better mechanisms for asynchronous I/O are possible in later
work.
Set to "try" for now for test coverage. Default setting to be finalized
before release.
The GUC wal_decode_buffer_size limits the distance we can look ahead in
bytes of decoded data.
The existing GUC maintenance_io_concurrency is used to limit the number
of concurrent I/Os allowed, based on pessimistic heuristics used to
infer that I/Os have begun and completed. We'll also not look more than
maintenance_io_concurrency * 4 block references ahead.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Tomas Vondra <tomas.vondra@2ndquadrant.com>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com> (earlier version)
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier version)
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com> (earlier version)
Tested-by: Tomas Vondra <tomas.vondra@2ndquadrant.com> (earlier version)
Tested-by: Jakub Wartak <Jakub.Wartak@tomtom.com> (earlier version)
Tested-by: Dmitry Dolgov <9erthalion6@gmail.com> (earlier version)
Tested-by: Sait Talha Nisanci <Sait.Nisanci@microsoft.com> (earlier version)
Discussion: https://postgr.es/m/CA%2BhUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq%3DAovOddfHpA%40mail.gmail.com
With stats now being stored in shared memory, the GUC isn't needed
anymore. However, the pg_stat_tmp directory and PG_STAT_TMP_DIR define are
kept, as pg_stat_statements (and some out-of-core extensions) store data in
it.
Docs will be updated in a subsequent commit, together with the other pending
docs updates due to shared memory stats.
Author: Andres Freund <andres@anarazel.de>
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220330233550.eiwsbearu6xhuqwe@alap3.anarazel.de
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Previously the statistics collector received statistics updates via UDP and
shared statistics data by writing them out to temporary files regularly. These
files can reach tens of megabytes and are written out up to twice a
second. This has repeatedly prevented us from adding additional useful
statistics.
Now statistics are stored in shared memory. Statistics for variable-numbered
objects are stored in a dshash hashtable (backed by dynamic shared
memory). Fixed-numbered stats are stored in plain shared memory.
The header for pgstat.c contains an overview of the architecture.
The stats collector is not needed anymore, remove it.
By utilizing the transactional statistics drop infrastructure introduced in a
prior commit statistics entries cannot "leak" anymore. Previously leaked
statistics were dropped by pgstat_vacuum_stat(), called from [auto-]vacuum. On
systems with many small relations pgstat_vacuum_stat() could be quite
expensive.
Now that replicas drop statistics entries for dropped objects, it is not
necessary anymore to reset stats when starting from a cleanly shut down
replica.
Subsequent commits will perform some further code cleanup, adapt docs and add
tests.
Bumps PGSTAT_FILE_FORMAT_ID.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-By: "David G. Johnston" <david.g.johnston@gmail.com>
Reviewed-By: Tomas Vondra <tomas.vondra@2ndquadrant.com> (in a much earlier version)
Reviewed-By: Arthur Zakirov <a.zakirov@postgrespro.ru> (in a much earlier version)
Reviewed-By: Antonin Houska <ah@cybertec.at> (in a much earlier version)
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Discussion: https://postgr.es/m/20220308205351.2xcn6k4x5yivcxyd@alap3.anarazel.de
Discussion: https://postgr.es/m/20210319235115.y3wz7hpnnrshdyv6@alap3.anarazel.de
When evaluating a query with a multi-column GROUP BY clause using sort,
the cost may be heavily dependent on the order in which the keys are
compared when building the groups. Grouping does not imply any ordering,
so we're allowed to compare the keys in arbitrary order, and a Hash Agg
leverages this. But for Group Agg, we simply compared keys in the order
as specified in the query. This commit explores alternative ordering of
the keys, trying to find a cheaper one.
In principle, we might generate grouping paths for all permutations of
the keys, and leave the rest to the optimizer. But that might get very
expensive, so we try to pick only a couple interesting orderings based
on both local and global information.
When planning the grouping path, we explore statistics (number of
distinct values, cost of the comparison function) for the keys and
reorder them to minimize comparison costs. Intuitively, it may be better
to perform more expensive comparisons (for complex data types etc.)
last, because maybe the cheaper comparisons will be enough. Similarly,
the higher the cardinality of a key, the lower the probability we’ll
need to compare more keys. The patch generates and costs various
orderings, picking the cheapest ones.
The ordering of group keys may interact with other parts of the query,
some of which may not be known while planning the grouping. E.g. there
may be an explicit ORDER BY clause, or some other ordering-dependent
operation, higher up in the query, and using the same ordering may allow
using either incremental sort or even eliminate the sort entirely.
The patch generates orderings and picks those minimizing the comparison
cost (for various pathkeys), and then adds orderings that might be
useful for operations higher up in the plan (ORDER BY, etc.). Finally,
it always keeps the ordering specified in the query, on the assumption
the user might have additional insights.
This introduces a new GUC enable_group_by_reordering, so that the
optimization may be disabled if needed.
The original patch was proposed by Teodor Sigaev, and later improved and
reworked by Dmitry Dolgov. Reviews by a number of people, including me,
Andrey Lepikhov, Claudio Freire, Ibrar Ahmed and Zhihong Yu.
Author: Dmitry Dolgov, Teodor Sigaev, Tomas Vondra
Reviewed-by: Tomas Vondra, Andrey Lepikhov, Claudio Freire, Ibrar Ahmed, Zhihong Yu
Discussion: https://postgr.es/m/7c79e6a5-8597-74e8-0671-1c39d124c9d6%40sigaev.ru
Discussion: https://postgr.es/m/CA%2Bq6zcW_4o2NC0zutLkOJPsFt80megSpX_dVRo6GK9PC-Jx_Ag%40mail.gmail.com
Up to now, the planner estimated the size of a recursive query's
worktable as 10 times the size of the non-recursive term. It's hard
to see how to do significantly better than that automatically, but
we can give users control over the multiplier to allow tuning for
specific use-cases. The default behavior remains the same.
Simon Riggs
Discussion: https://postgr.es/m/CANbhV-EuaLm4H3g0+BSTYHEGxJj3Kht0R+rJ8vT57Dejnh=_nA@mail.gmail.com
wal_compression gains a new value, "zstd", to allow the compression of
full-page images using the compression method of the same name.
Compression is done using the default level recommended by the library,
as of ZSTD_CLEVEL_DEFAULT = 3. Some benchmarking has shown that it
could make sense to use a level lower for the FPI compression, like 1 or
2, as the compression rate did not change much with a bit less CPU
consumed, but any tests done would only cover few scenarios so it is
hard to come to a clear conclusion. Anyway, there is no reason to not
use the default level instead, which is the level recommended by the
library so it should be fine for most cases.
zstd outclasses easily pglz, and is better than LZ4 where one wants to
have more compression at the cost of extra CPU but both are good enough
in their own scenarios, so the choice between one or the other of these
comes to a study of the workload patterns and the schema involved,
mainly.
This commit relies heavily on 4035cd5, that reshaped the code creating
and restoring full-page writes to be aware of the compression type,
making this integration straight-forward.
This patch borrows some early work from Andrey Borodin, though the patch
got a complete rewrite.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220222231948.GJ9008@telsasoft.com
Double the default setting for hash_mem_multiplier, from 1.0 to 2.0.
This setting makes hash-based executor nodes use twice the usual
work_mem limit.
The PostgreSQL 15 release notes should have a compatibility note about
this change.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-Wzndc_ROk6CY-bC6p9O53q974Y0Ey4WX8jcPbuTZYM4Q3A@mail.gmail.com
Running a shell command for each file to be archived has a lot of
overhead and may not offer as much error checking as you want, or the
exact semantics that you want. So, offer the option to call a loadable
module for each file to be archived, rather than running a shell command.
Also, add a 'basic_archive' contrib module as an example implementation
that archives to a local directory.
Nathan Bossart, with a little bit of kibitzing by me.
Discussion: http://postgr.es/m/20220202224433.GA1036711@nathanxps13
"jsonlog" is a new value that can be added to log_destination to provide
logs in the JSON format, with its output written to a file, making it
the third type of destination of this kind, after "stderr" and
"csvlog". The format is convenient to feed logs to other applications.
There is also a plugin external to core that provided this feature using
the hook in elog.c, but this had to overwrite the output of "stderr" to
work, so being able to do both at the same time was not possible. The
files generated by this log format are suffixed with ".json", and use
the same rotation policies as the other two formats depending on the
backend configuration.
This takes advantage of the refactoring work done previously in ac7c807,
bed6ed3, 8b76f89 and 2d77d83 for the backend parts, and 72b76f7 for the
TAP tests, making the addition of any new file-based format rather
straight-forward.
The documentation is updated to list all the keys and the values that
can exist in this new format. pg_current_logfile() also required a
refresh for the new option.
Author: Sehrope Sarkuni, Michael Paquier
Reviewed-by: Nathan Bossart, Justin Pryzby
Discussion: https://postgr.es/m/CAH7T-aqswBM6JWe4pDehi1uOiufqe06DJWaU5=X7dDLyqUExHg@mail.gmail.com
The idea here is that when a performance problem is known to have
occurred at a certain point in time, it's a good thing if there is
some information available from the logs to help figure out what
might have happened around that time.
This change attracted an above-average amount of dissent, because
it means that a server with default settings will produce some amount
of log output even if nothing has gone wrong. However, by my count,
the mailing list discussion had about twice as many people in favor
of the change as opposed. The reasons for believing that the extra
log output is not an issue in practice are: (1) the rate at which
messages can be generated by this setting is bounded to one every
few minutes on a properly-configured system and (2) production
systems tend to have a lot more junk in the log from that due to
failed connection attempts, ERROR messages generated by application
activity, and the like.
Bharath Rupireddy, reviewed by Fujii Masao and by me. Many other
people commented on the thread, but as far as I can see that was
discussion of the merits of the change rather than review of the
patch.
Discussion: https://postgr.es/m/CALj2ACX-rW_OeDcp4gqrFUAkf1f50Fnh138dmkd0JkvCNQRKGA@mail.gmail.com
Users sometimes get concerned whe they start the server and it
emits a few messages and then doesn't emit any more messages for
a long time. Generally, what's happening is either that the
system is taking a long time to apply WAL, or it's taking a
long time to reset unlogged relations, or it's taking a long
time to fsync the data directory, but it's not easy to tell
which is the case.
To fix that, add a new 'log_startup_progress_interval' setting,
by default 10s. When an operation that is known to be potentially
long-running takes more than this amount of time, we'll log a
status update each time this interval elapses.
To avoid undesirable log chatter, don't log anything about WAL
replay when in standby mode.
Nitin Jadhav and Robert Haas, reviewed by Amul Sul, Bharath
Rupireddy, Justin Pryzby, Michael Paquier, and Álvaro Herrera.
Discussion: https://postgr.es/m/CA+TgmoaHQrgDFOBwgY16XCoMtXxsrVGFB2jNCvb7-ubuEe1MGg@mail.gmail.com
Discussion: https://postgr.es/m/CAMm1aWaHF7VE69572_OLQ+MgpT5RUiUDgF1x5RrtkJBLdpRj3Q@mail.gmail.com
In postgresql.conf, memory and file size GUCs can be specified with "B"
(bytes) as of b06d8e58b. Likewise, time GUCs can be specified with "us"
(microseconds) as of caf626b2c. Update postgres.conf.sample to reflect
that fact.
Pavel Luzanov
Backpatch to v12, which is the earliest version that allows both of
these units. A separate commit will document the "B" case for v11.
Discussion: https://www.postgresql.org/message-id/flat/f10d16fc-8fa0-1b3c-7371-cb3a35a13b7a%40postgrespro.ru
"Result Cache" was never a great name for this node, but nobody managed
to come up with another name that anyone liked enough. That was until
David Johnston mentioned "Node Memoization", which Tom Lane revised to
just "Memoize". People seem to like "Memoize", so let's do the rename.
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/20210708165145.GG1176@momjian.us
Backpatch-through: 14, where Result Cache was introduced
The logic is implemented so as there can be a choice in the compression
used when building a WAL record, and an extra per-record bit is used to
track down if a block is compressed with PGLZ, LZ4 or nothing.
wal_compression, the existing parameter, is changed to an enum with
support for the following backward-compatible values:
- "off", the default, to not use compression.
- "pglz" or "on", to compress FPWs with PGLZ.
- "lz4", the new mode, to compress FPWs with LZ4.
Benchmarking has showed that LZ4 outclasses easily PGLZ. ZSTD would be
also an interesting choice, but going just with LZ4 for now makes the
patch minimalistic as toast compression is already able to use LZ4, so
there is no need to worry about any build-related needs for this
implementation.
Author: Andrey Borodin, Justin Pryzby
Reviewed-by: Dilip Kumar, Michael Paquier
Discussion: https://postgr.es/m/3037310D-ECB7-4BF1-AF20-01C10BB33A33@yandex-team.ru
The setting has no effect except during startup. It's still nice to be
able to change it dynamically, which is expected to be pretty useful to
an admin following crash recovery when restarting the cluster is not so
appealing.
Per discussions following commits 2941138e6 and 61752afb2.
Author: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20210529192321.GM2082%40telsasoft.com
The main goal of this option is to allow inspecting temporary files for
debugging purposes, so moving the parameter there is natural.
Oversight in cd91de0.
Reported-by: Justin Pryzby
Author: Euler Taveira
Discussion: https://postgr.es/m/20210612004347.GP16435@telsasoft.com
The following parameters have been imprecise, or incorrect, about their
description (PGC_POSTMASTER or PGC_SIGHUP):
- autovacuum_work_mem (docs, as of 9.6~)
- huge_page_size (docs, as of 14~)
- max_logical_replication_workers (docs, as of 10~)
- max_sync_workers_per_subscription (docs, as of 10~)
- min_dynamic_shared_memory (docs, as of 14~)
- recovery_init_sync_method (postgresql.conf.sample, as of 14~)
- remove_temp_files_after_crash (docs, as of 14~)
- restart_after_crash (docs, as of 9.6~)
- ssl_min_protocol_version (docs, as of 12~)
- ssl_max_protocol_version (docs, as of 12~)
This commit adjusts the description of all these parameters to be more
consistent with the practice used for the others.
Revewed-by: Justin Pryzby
Discussion: https://postgr.es/m/YK2ltuLpe+FbRXzA@paquier.xyz
Backpatch-through: 9.6
Allowing only on/off meant that all either all existing configuration
guides would become obsolete if we disabled it by default, or that we
would have to accept a performance loss in the default config if we
enabled it by default. By allowing 'auto' as a middle ground, the
performance cost is only paid by those who enable pg_stat_statements and
similar modules.
I only edited the release notes to comment-out a paragraph that is now
factually wrong; further edits are probably needed to describe the
related change in more detail.
Author: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20210513002623.eugftm4nk2lvvks3@nol
