postgres_fdw will close its remote session if an sinval cache reset
occurs, since it's possible that that means some FDW parameters
changed. We had two tests that were trying to ensure that the
session remains alive by setting debug_discard_caches = 0; but
that's not sufficient. Even though the tests seem stable enough
in the buildfarm, they flap a lot under CI.
In the first test, which is checking the ability to recover from
a lost connection, we can stabilize the results by just not
caring whether pg_terminate_backend() finds a victim backend.
If a reset did happen, there won't be a session to terminate
anymore, but the test can proceed anyway. (Arguably, we are
then not testing the unintentional-disconnect case, but as long
as that scenario is exercised in most runs I think it's fine;
testing the reset-driven case is of value too.)
In the second test, which is trying to verify the application_name
displayed in pg_stat_activity by a remote session, we had a race
condition in that the remote session might go away before we can
fetch its pg_stat_activity entry. We can close that race and make
the test more certainly test what it intends to by arranging things
so that the remote session itself fetches its pg_stat_activity entry
(based on PID rather than a somewhat-circular assumption about the
application name).
Both tests now demonstrably pass under debug_discard_caches = 1,
so we can remove that hack.
Back-patch into relevant back branches.
Discussion: https://postgr.es/m/20230226194340.u44bkfgyz64c67i6@awork3.anarazel.de
postgres_fdw.application_name relies on MyProcPort to define the data
that should be added to escape sequences %u (user name) or %d (database
name). However this code could be run in processes that lack a
MyProcPort, like an autovacuum process, causing crashes.
The code generating the application name is made more flexible with this
commit, so as it now generates no data for %u and %d if MyProcPort is
missing, and a simple "unknown" if MyProcPort exists, but the expected
fields are not set.
Reported-by: Alexander Lakhin
Author: Kyotaro Horiguchi, Michael Paquier
Reviewed-by: Hayato Kuroda, Masahiko Sawada
Discussion: https://postgr.es/m/17789-8b31c5a4672b74d9@postgresql.org
Backpatch-through: 15
GetWALRecordsInfo() and pg_get_wal_fpi_info() can leak memory across
WAL record iterations. Fix this by using a temporary memory context
that's reset for each WAL record iteraion.
Also a use temporary context for loops in GetXLogSummaryStats(). The
number of iterations is a small constant, so the previous behavior was
not a leak, but fix for clarity (but no need to backport).
Backport GetWALRecordsInfo() change to version
15. pg_get_wal_fpi_info() didn't exist in version 15.
Reported-by: Peter Geoghegan
Author: Bharath Rupireddy
Discussion: https://www.postgresql.org/message-id/CAH2-WznLEJjn7ghmKOABOEZYuJvkTk%3DGKU3m0%2B-XBAH%2BerPiJQ%40mail.gmail.com
Backpatch-through: 15
This commit adds more coverage for utility statements so as it is
possible to track down all the effects of query normalization done for
all the queries that use either Const or A_Const nodes, which are the
nodes where normalization makes the most sense as they apply to
constants (well, most of the time, really).
This set of queries is extracted from an analysis done while looking at
full dumps of the regression database when applying different levels of
normalization to either Const or A_Const nodes for utilities, as of a
minimal set of these, for:
- All relkinds (CREATE, ALTER, DROP)
- Policies
- Cursors
- Triggers
- Types
- Rules
- Statistics
- CALL
- Transaction statements (isolation level, options)
- EXPLAIN
- COPY
Note that pg_stat_statements is not switched yet to show any
normalization for utilities, still it improves the default coverage of
the query jumbling code (not by as much as enabling query jumbling on
the main regression test suite, though):
- queryjumblefuncs.funcs.c: 36.8% => 48.5%
- queryjumblefuncs.switch.c: 33.2% => 43.1%
Reviewed-by: Bertrand Drouvot
Discussion: https://postgr.es/m/Y+MRdEq9W9XVa2AB@paquier.xyz
pg_stat_statements.sql acts as the main file for all the core tests of
the module, but things have become complicated to follow over the years
as some of the sub-scenarios tested in this file rely on assumptions
that come from completely different areas of it, like a GUC setup or a
relation created previously. For example, row tracking for CTAS/COPY
was looking at the number of plans, which was not necessary, or level
tracking was mixed with checks on planner counts.
This commit refactors the tests of pg_stat_statements, by moving test
cases out of pg_stat_statements.sql into their own file, as of:
- Planning-related tests in planning.sql, for [re]plan counts and
top-level handling. These depend on pg_stat_statements.track_planning.
- Utilities in utility.sql (pg_stat_statements.track_utility), that
includes now the tests for:
-- Row tracking for CTAS, CREATE MATERIALIZED VIEW, COPY.
-- Basic utility statements.
-- SET statements.
- Tracking level, depending on pg_stat_statements.track. This part has
been looking at scenarios with DO blocks, PL functions and SQL
functions.
pg_stat_statements.sql (still named the same for now) still includes
some checks for role-level tracking and WAL generation metrics, that
ought to become independent in the long term for clarity.
While on it, this switches the order of the attributes when querying
pg_stat_statements, the query field becoming last. This makes much
easier the tracking of changes related to normalization, as queries are
the only variable-length attributes queried (unaligned mode would be one
extra choice, but that reduces the checks on the other fields).
Test scenarios and their results match exactly with what was happening
before this commit in terms of calls, number of plans, number of rows,
cached data or level tracking, so this has no effect on the coverage in
terms of what is produced by the reports in the table
pg_stat_statements. A follow-up patch will extend more the tests of
pg_stat_statements around utilities, so this split creates a foundation
for this purpose, without complicating more pg_stat_statements.sql.
Reviewed-by: Bertrand Drouvot
Discussion: https://postgr.es/m/Y+MRdEq9W9XVa2AB@paquier.xyz
A new callback named startup_cb, called shortly after a module is
loaded, is added. This makes possible the initialization of any
additional state data required by a module. This initial state data can
be saved in a ArchiveModuleState, that is now passed down to all the
callbacks that can be defined in a module. With this design, it is
possible to have a per-module state, aimed at opening the door to the
support of more than one archive module.
The initialization of the callbacks is changed so as
_PG_archive_module_init() does not anymore give in input a
ArchiveModuleCallbacks that a module has to fill in with callback
definitions. Instead, a module now needs to return a const
ArchiveModuleCallbacks.
All the structure and callback definitions of archive modules are moved
into their own header, named archive_module.h, from pgarch.h.
Command-based archiving follows the same line, with a new set of files
named shell_archive.{c,h}.
There are a few more items that are under discussion to improve the
design of archive modules, like the fact that basic_archive calls
sigsetjmp() by itself to define its own error handling flow. These will
be adjusted later, the changes done here cover already a good portion
of what has been discussed.
Any modules created for v15 will need to be adjusted to this new
design.
Author: Nathan Bossart
Reviewed-by: Andres Freund
Discussion: https://postgr.es/m/20230130194810.6fztfgbn32e7qarj@awork3.anarazel.de
Like the implementation for node copy, write and read, this node
requires a custom implementation so as the query jumbling is able to
consider the correct value assigned to it, depending on its type (int,
float, bool, string, bitstring).
Based on a dump of pg_stat_statements from the regression database, this
would confuse the query jumbling of the following queries:
- SET.
- COPY TO with SELECT queries.
- START TRANSACTION with different isolation levels.
- ALTER TABLE with default expressions.
- CREATE TABLE with partition bounds.
Note that there may be a long-term argument in tracking the location of
such nodes so as query strings holding such nodes could be normalized,
but this is left as a separate discussion.
Oversight in 3db72eb.
Discussion: https://postgr.es/m/Y9+HuYslMAP6yyPb@paquier.xyz
Thanks to Robins to find the issue and Nathan for promptly writing a test case
to prevent future problems like this.
Reported-by: Nathan Bossart <nathandbossart@gmail.com>
Reported-by: Robins Tharakan <tharakan@gmail.com>
Author: Nathan Bossart <nathandbossart@gmail.com>
Discussion: https://postgr.es/m/20230130193008.GA2740781@nathanxps13
This commit changes the query jumbling code in queryjumblefuncs.c to be
generated automatically based on the information of the nodes in the
headers of src/include/nodes/ by using gen_node_support.pl. This
approach offers many advantages:
- Support for query jumbling for all the utility statements, based on the
state of their parsed Nodes and not only their query string. This will
greatly ease the switch to normalize the information of some DDLs, like
SET or CALL for example (this is left unchanged and should be part of a
separate discussion). With this feature, the number of entries stored
for utilities in pg_stat_statements is reduced (for example now
"CHECKPOINT" and "checkpoint" mean the same thing with the same query
ID).
- Documentation of query jumbling directly in the structure definition
of the nodes. Since this code has been introduced in pg_stat_statements
and then moved to code, the reasons behind the choices of what should be
included in the jumble are rather sparse. Note that some explanation is
added for the most relevant parts, as a start.
- Overall code reduction and more consistency with the other parts
generating read, write and copy depending on the nodes.
The query jumbling is controlled by a couple of new node attributes,
documented in nodes/nodes.h:
- custom_query_jumble, to mark a Node as having a custom
implementation.
- no_query_jumble, to ignore entirely a Node.
- query_jumble_ignore, to ignore a field in a Node.
- query_jumble_location, to mark a location in a Node, for
normalization. This can apply only to int fields, with "location" in
their name (only Const as of this commit).
There should be no compatibility impact on pg_stat_statements, as the
new code applies the jumbling to the same fields for each node (its
regression tests have no modification, for one).
Some benchmark of the query jumbling between HEAD and this commit for
SELECT and DMLs has proved that this new code does not cause a
performance regression, with computation times close for both methods.
For utility queries, the new method is slower than the previous method
of calculating a hash of the query string, though we are talking about
extra ns-level changes based on what I measured, which is unnoticeable
even for OLTP workloads as a query ID is calculated once per query
post-parse analysis.
Author: Michael Paquier
Reviewed-by: Peter Eisentraut
Discussion: https://postgr.es/m/Y5BHOUhX3zTH/ig6@paquier.xyz
EquivalenceClasses are now understood as applying within a "join
domain", which is a set of inner-joined relations (possibly underneath
an outer join). We no longer need to treat an EC from below an outer
join as a second-class citizen.
I have hopes of eventually being able to treat outer-join clauses via
EquivalenceClasses, by means of only applying deductions within the
EC's join domain. There are still problems in the way of that, though,
so for now the reconsider_outer_join_clause logic is still here.
I haven't been able to get rid of RestrictInfo.is_pushed_down either,
but I wonder if that could be recast using JoinDomains.
I had to hack one test case in postgres_fdw.sql to make it still test
what it was meant to, because postgres_fdw is inconsistent about
how it deals with quals containing non-shippable expressions; see
https://postgr.es/m/1691374.1671659838@sss.pgh.pa.us. That should
be improved, but I don't think it's within the scope of this patch
series.
Patch by me; thanks to Richard Guo for review.
Discussion: https://postgr.es/m/830269.1656693747@sss.pgh.pa.us
Remove RestrictInfo.nullable_relids, along with a good deal of
infrastructure that calculated it. One use-case for it was in
join_clause_is_movable_to, but we can now replace that usage with
a check to see if the clause's relids include any outer join
that can null the target relation. The other use-case was in
join_clause_is_movable_into, but that test can just be dropped
entirely now that the clause's relids include outer joins.
Furthermore, join_clause_is_movable_into should now be
accurate enough that it will accept anything returned by
generate_join_implied_equalities, so we can restore the Assert
that was diked out in commit 95f4e59c3.
Remove the outerjoin_delayed mechanism. We needed this before to
prevent quals from getting evaluated below outer joins that should
null some of their vars. Now that we consider varnullingrels while
placing quals, that's taken care of automatically, so throw the
whole thing away.
Teach remove_useless_result_rtes to also remove useless FromExprs.
Having done that, the delay_upper_joins flag serves no purpose any
more and we can remove it, largely reverting 11086f2f2.
Use constant TRUE for "dummy" clauses when throwing back outer joins.
This improves on a hack I introduced in commit 6a6522529. If we
have a left-join clause l.x = r.y, and a WHERE clause l.x = constant,
we generate r.y = constant and then don't really have a need for the
join clause. But we must throw the join clause back anyway after
marking it redundant, so that the join search heuristics won't think
this is a clauseless join and avoid it. That was a kluge introduced
under time pressure, and after looking at it I thought of a better
way: let's just introduce constant-TRUE "join clauses" instead,
and get rid of them at the end. This improves the generated plans for
such cases by not having to test a redundant join clause. We can also
get rid of the ugly hack used to mark such clauses as redundant for
selectivity estimation.
Patch by me; thanks to Richard Guo for review.
Discussion: https://postgr.es/m/830269.1656693747@sss.pgh.pa.us
Traditionally we used the same Var struct to represent the value
of a table column everywhere in parse and plan trees. This choice
predates our support for SQL outer joins, and it's really a pretty
bad idea with outer joins, because the Var's value can depend on
where it is in the tree: it might go to NULL above an outer join.
So expression nodes that are equal() per equalfuncs.c might not
represent the same value, which is a huge correctness hazard for
the planner.
To improve this, decorate Var nodes with a bitmapset showing
which outer joins (identified by RTE indexes) may have nulled
them at the point in the parse tree where the Var appears.
This allows us to trust that equal() Vars represent the same value.
A certain amount of klugery is still needed to cope with cases
where we re-order two outer joins, but it's possible to make it
work without sacrificing that core principle. PlaceHolderVars
receive similar decoration for the same reason.
In the planner, we include these outer join bitmapsets into the relids
that an expression is considered to depend on, and in consequence also
add outer-join relids to the relids of join RelOptInfos. This allows
us to correctly perceive whether an expression can be calculated above
or below a particular outer join.
This change affects FDWs that want to plan foreign joins. They *must*
follow suit when labeling foreign joins in order to match with the
core planner, but for many purposes (if postgres_fdw is any guide)
they'd prefer to consider only base relations within the join.
To support both requirements, redefine ForeignScan.fs_relids as
base+OJ relids, and add a new field fs_base_relids that's set up by
the core planner.
Large though it is, this commit just does the minimum necessary to
install the new mechanisms and get check-world passing again.
Follow-up patches will perform some cleanup. (The README additions
and comments mention some stuff that will appear in the follow-up.)
Patch by me; thanks to Richard Guo for review.
Discussion: https://postgr.es/m/830269.1656693747@sss.pgh.pa.us
When auto_explain.log_verbose is on, auto_explain should print in the
logs plans equivalent to the EXPLAIN (VERBOSE). However, when
compute_query_id is on, query identifiers were not showing up, being
only handled by EXPLAIN (VERBOSE). This brings auto_explain on par with
EXPLAIN regarding that. Note that like EXPLAIN, auto_explain does not
show the query identifier when compute_query_id=regress.
The change is done so as the choice of printing the query identifier is
done in ExplainPrintPlan() rather than in ExplainOnePlan(), to avoid a
duplication of the logic dealing with the query ID. auto_explain is the
only in-core caller of ExplainPrintPlan().
While looking at the area, I have noticed that more consolidation
between EXPLAIN and auto_explain would be in order for the logging of
the plan duration and the buffer usage. This refactoring is left as a
future change.
Author: Atsushi Torikoshi
Reviewed-by: Justin Pryzby, Julien Rouhaud
Discussion: https://postgr.es/m/1ea21936981f161bccfce05765c03bee@oss.nttdata.com
This rename is in preparation for the introduction of recovery modules,
where basic_wal_module will be used as a base template for the set of
callbacks introduced. The former name did not really reflect all that.
Author: Nathan Bossart
Discussion: https://postgr.es/m/20221227192449.GA3672473@nathanxps13
Until now dblink and postgres_fdw did not process interrupts during connection
establishment. Besides preventing query cancellations etc, this can lead to
undetected deadlocks, as global barriers are not processed.
These aforementioned undetected deadlocks are the reason for the spate of CI
test failures in the FreeBSD 'test_running' step.
Fix the bug by using the helper from libpq-be-fe-helpers.h, introduced in a
prior commit. Besides fixing the bug, this also removes duplicated code
around reserving file descriptors.
As the change is relatively large and there are no field reports of the
problem, don't backpatch for now.
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20220925232237.p6uskba2dw6fnwj2@awork3.anarazel.de
Backpatch:
This function is able to extract the full page images from a range of
records, specified as of input arguments start_lsn and end_lsn. Like
the other functions of this module, an error is returned if using LSNs
that do not reflect real system values. All the FPIs stored in a single
record are extracted.
The module's version is bumped to 1.1.
Author: Bharath Rupireddy
Reviewed-by: Bertrand Drouvot
Discussion: https://postgr.es/m/CALj2ACVCcvzd7WiWvD=6_7NBvVB_r6G0EGSxL4F8vosAi6Se4g@mail.gmail.com
This will ease a follow-up move that will generate automatically this
code. The C file is renamed, for consistency with the node-related
files whose code are generated by gen_node_support.pl:
- queryjumble.c -> queryjumblefuncs.c
- utils/queryjumble.h -> nodes/queryjumble.h
Per a suggestion from Peter Eisentraut.
Reviewed-by: Peter Eisentraut
Discussion: https://postgr.es/m/Y5BHOUhX3zTH/ig6@paquier.xyz
The rule system needs "old" and/or "new" pseudo-RTEs in rule actions
that are ON INSERT/UPDATE/DELETE. Historically it's put such entries
into the ON SELECT rules of views as well, but those are really quite
vestigial. The only thing we've used them for is to carry the
view's relid forward to AcquireExecutorLocks (so that we can
re-lock the view to verify it hasn't changed before re-using a plan)
and to carry its relid and permissions data forward to execution-time
permissions checks. What we can do instead of that is to retain
these fields of the RTE_RELATION RTE for the view even after we
convert it to an RTE_SUBQUERY RTE. This requires a tiny amount of
extra complication in the planner and AcquireExecutorLocks, but on
the other hand we can get rid of the logic that moves that data from
one place to another.
The principal immediate benefit of doing this, aside from a small
saving in the pg_rewrite data for views, is that these pseudo-RTEs
no longer trigger ruleutils.c's heuristic about qualifying variable
names when the rangetable's length is more than 1. That results
in quite a number of small simplifications in regression test outputs,
which are all to the good IMO.
Bump catversion because we need to dump a few more fields of
RTE_SUBQUERY RTEs. While those will always be zeroes anyway in
stored rules (because we'd never populate them until query rewrite)
they are useful for debugging, and it seems like we'd better make
sure to transmit such RTEs accurately in plans sent to parallel
workers. I don't think the executor actually examines these fields
after startup, but someday it might.
This is a second attempt at committing 1b4d280ea. The difference
from the first time is that now we can add some filtering rules to
AdjustUpgrade.pm to allow cross-version upgrade testing to pass
despite all the cosmetic changes in CREATE VIEW outputs.
Amit Langote (filtering rules by me)
Discussion: https://postgr.es/m/CA+HiwqEf7gPN4Hn+LoZ4tP2q_Qt7n3vw7-6fJKOf92tSEnX6Gg@mail.gmail.com
Discussion: https://postgr.es/m/891521.1673657296@sss.pgh.pa.us
Avoid explicitly grouping by columns that we know are redundant
for sorting, for example we need group by only one of x and y in
SELECT ... WHERE x = y GROUP BY x, y
This comes up more often than you might think, as shown by the
changes in the regression tests. It's nearly free to detect too,
since we are just piggybacking on the existing logic that detects
redundant pathkeys. (In some of the existing plans that change,
it's visible that a sort step preceding the grouping step already
didn't bother to sort by the redundant column, making the old plan
a bit silly-looking.)
To do this, build processed_groupClause and processed_distinctClause
lists that omit any provably-redundant sort items, and consult those
not the originals where relevant. This means that within the
planner, one should usually consult root->processed_groupClause or
root->processed_distinctClause if one wants to know which columns
are to be grouped on; but to check whether grouping or distinct-ing
is happening at all, check non-NIL-ness of parse->groupClause or
parse->distinctClause. This is comparable to longstanding rules
about handling the HAVING clause, so I don't think it'll be a huge
maintenance problem.
nodeAgg.c also needs minor mods, because it's now possible to generate
AGG_PLAIN and AGG_SORTED Agg nodes with zero grouping columns.
Patch by me; thanks to Richard Guo and David Rowley for review.
Discussion: https://postgr.es/m/185315.1672179489@sss.pgh.pa.us
This makes sure that the internal logic of these functions does not
attempt to change the value of the arguments constified, and it removes
one unconstify() in basic_archive.c.
Author: Nathan Bossart
Reviewed-by: Andrew Dunstan, Peter Eisentraut
Discussion: https://postgr.es/m/20230114231126.GA2580330@nathanxps13
It's likely worth adding some automated way of preventing further
omissions. We're discussing how to best do that.
Reported-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20230117173509.GV9837@telsasoft.com
This reverts commit 1b4d280ea1.
It's broken the buildfarm members that run cross-version-upgrade tests,
because they're not prepared to deal with cosmetic differences between
CREATE VIEW commands emitted by older servers and HEAD. Even if we had
a solution to that, which we don't, it'd take some time to roll it out
to the affected animals. This improvement isn't valuable enough to
justify addressing that problem on an emergency basis, so revert it
for now.
The rule system needs "old" and/or "new" pseudo-RTEs in rule actions
that are ON INSERT/UPDATE/DELETE. Historically it's put such entries
into the ON SELECT rules of views as well, but those are really quite
vestigial. The only thing we've used them for is to carry the
view's relid forward to AcquireExecutorLocks (so that we can
re-lock the view to verify it hasn't changed before re-using a plan)
and to carry its relid and permissions data forward to execution-time
permissions checks. What we can do instead of that is to retain
these fields of the RTE_RELATION RTE for the view even after we
convert it to an RTE_SUBQUERY RTE. This requires a tiny amount of
extra complication in the planner and AcquireExecutorLocks, but on
the other hand we can get rid of the logic that moves that data from
one place to another.
The principal immediate benefit of doing this, aside from a small
saving in the pg_rewrite data for views, is that these pseudo-RTEs
no longer trigger ruleutils.c's heuristic about qualifying variable
names when the rangetable's length is more than 1. That results
in quite a number of small simplifications in regression test outputs,
which are all to the good IMO.
Bump catversion because we need to dump a few more fields of
RTE_SUBQUERY RTEs. While those will always be zeroes anyway in
stored rules (because we'd never populate them until query rewrite)
they are useful for debugging, and it seems like we'd better make
sure to transmit such RTEs accurately in plans sent to parallel
workers. I don't think the executor actually examines these fields
after startup, but someday it might.
Amit Langote
Discussion: https://postgr.es/m/CA+HiwqEf7gPN4Hn+LoZ4tP2q_Qt7n3vw7-6fJKOf92tSEnX6Gg@mail.gmail.com
There are a number of places where a shell command is constructed with
percent-placeholders (like %x). It's cumbersome to have to open-code
this several times. This factors out this logic into a separate
function. This also allows us to ensure consistency for and document
some subtle behaviors, such as what to do with unrecognized
placeholders.
The unified handling is now that incorrect and unknown placeholders
are an error, where previously in most cases they were skipped or
ignored. This affects the following settings:
- archive_cleanup_command
- archive_command
- recovery_end_command
- restore_command
- ssl_passphrase_command
The following settings are part of this refactoring but already had
stricter error handling and should be unchanged in their behavior:
- basebackup_to_shell.command
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/5238bbed-0b01-83a6-d4b2-7eb0562a054e%40enterprisedb.com
Check the remote relkind before trying to use TABLESAMPLE to acquire
sample from the remote relation. Even if the remote server version has
TABLESAMPLE support, the foreign table may point to incompatible relkind
(e.g. a view or a sequence).
If the relkind does not support TABLESAMPLE, error out if TABLESAMPLE
was requested specifically (as system/bernoulli), or fallback to random
just like we do for old server versions.
We currently end up disabling sampling for such relkind values anyway,
due to reltuples being -1 or 1, but that seems rather accidental, and
might get broken by improving reltuples estimates, etc. So better to
make the check explicit.
Reported-by: Tom Lane
Discussion: https://postgr.es/m/951485.1672461744%40sss.pgh.pa.us
A comment was left behind referencing sample rate adjustment removed
from 8ad51b5f44. So clean that up. While at it also remove the sample
rate clamping which should not be necessary without the clamping, and
just check that with an assert.
Reported-by: Tom Lane
Discussion: https://postgr.es/m/951485.1672461744%40sss.pgh.pa.us
This is like the existing bt_page_stats() function, but it can
report on a range of pages rather than just one at a time.
I don't have a huge amount of faith in the portability of the
new test cases, but they do pass in a 32-bit FreeBSD VM here.
Further adjustment may be needed depending on buildfarm results.
Hamid Akhtar, reviewed by Naeem Akhter, Bertrand Drouvot,
Bharath Rupireddy, and myself
Discussion: https://postgr.es/m/CANugjht-=oGMRmNJKMqnBC69y7vr+wHDmm0ZK6-1pJsxoBKBbA@mail.gmail.com
When collecting ANALYZE sample on foreign tables, postgres_fdw fetched
all rows and performed the sampling locally. For large tables this means
transferring and immediately discarding large amounts of data.
This commit allows the sampling to be performed on the remote server,
transferring only the much smaller sample. The sampling is performed
using the built-in TABLESAMPLE methods (system, bernoulli) or random()
function, depending on the remote server version.
Remote sampling can be enabled by analyze_sampling on the foreign server
and/or foreign table, with supported values 'off', 'auto', 'system',
'bernoulli' and 'random'. The default value is 'auto' which uses either
'bernoulli' (TABLESAMPLE method) or 'random' (for remote servers without
TABLESAMPLE support).
Fix incorrect code which was trying to convert a Bitmapset of columns at
the attnums according to a parent table and transform them into the
equivalent Bitmapset with same attnums according to the given child table.
This code is new as of a61b1f748 and was failing to do the correct
translation when there was an intermediate parent table between 'rel' and
'top_parent_rel'.
Reported-by: Ranier Vilela
Author: Richard Guo, Amit Langote
Discussion: https://postgr.es/m/CAEudQArohfB_Gy%2BhcH2-bANUkxgjJiP%3DABq01_LgTNTbcNijag%40mail.gmail.com
seg stores the number of significant digits in an input number
in a "char" field. If char is signed, and the input is more than
127 digits long, the count can read out as negative causing
seg_out() to print garbage (or, if you're really unlucky,
even crash).
To fix, clamp the digit count to be not more than FLT_DIG.
(In theory this loses some information about what the original
input was, but it doesn't seem like useful information; it would
not survive dump/restore in any case.)
Also, in case there are stored values of the seg type containing
bad data, add a clamp in seg_out's restore() subroutine.
Per bug #17725 from Robins Tharakan. It's been like this
forever, so back-patch to all supported branches.
Discussion: https://postgr.es/m/17725-0a09313b67fbe86e@postgresql.org
This shaves some code by replacing the combinations of
CreateTemplateTupleDesc()/TupleDescInitEntry() hardcoding a mapping of
the attributes listed in pg_proc.dat by get_call_result_type() to build
the TupleDesc needed for the rows generated.
get_call_result_type() is more expensive than the former style, but this
removes some duplication with the lists of OUT parameters (pg_proc.dat
and the attributes hardcoded in these code paths). This is applied to
functions that are not considered as critical (aka that could be called
repeatedly for monitoring purposes).
Author: Bharath Rupireddy
Reviewed-by: Robert Haas, Álvaro Herrera, Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/CALj2ACV23HW5HP5hFjd89FNS-z5X8r2jNXdMXcpN2BgTtKd87w@mail.gmail.com
Commit 927f453a9 disallowed batching added by commit b663a4136 to be
used for the inserts performed as part of cross-partition updates of
partitioned tables, mainly because the previous code in
nodeModifyTable.c couldn't handle pending inserts into foreign-table
partitions that are also UPDATE target partitions. But we don't have
such a limitation anymore (cf. commit ffbb7e65a), so let's allow for
this by removing from execPartition.c the restriction added by commit
927f453a9 that batching is only allowed if the query command type is
CMD_INSERT.
In postgres_fdw, since commit 86dc90056 changed it to effectively
disable cross-partition updates in the case where a foreign-table
partition chosen to insert rows into is also an UPDATE target partition,
allow batching in the case where a foreign-table partition chosen to
do so is *not* also an UPDATE target partition. This is enabled by the
"batch_size" option added by commit b663a4136, which is disabled by
default.
This patch also adjusts the test case added by commit 927f453a9 to
confirm that the inserts performed as part of a cross-partition update
of a partitioned table indeed uses batching.
Amit Langote, reviewed and/or tested by Georgios Kokolatos, Zhihong Yu,
Bharath Rupireddy, Hou Zhijie, Vignesh C, and me.
Discussion: http://postgr.es/m/CA%2BHiwqH1Lz1yJmPs%3DaD-pzd_HLLynLHvq5iYeT9mB0bBV7oJ6w%40mail.gmail.com
When incremental sorts were added in v13 a 1.5x pessimism factor was added
to the cost modal. Seemingly this was done because the cost modal only
has an estimate of the total number of input rows and the number of
presorted groups. It assumes that the input rows will be evenly
distributed throughout the presorted groups. The 1.5x pessimism factor
was added to slightly reduce the likelihood of incremental sorts being
used in the hope to avoid performance regressions where an incremental
sort plan was picked and turned out slower due to a large skew in the
number of rows in the presorted groups.
An additional quirk with the path generation code meant that we could
consider both a sort and an incremental sort on paths with presorted keys.
This meant that with the pessimism factor, it was possible that we opted
to perform a sort rather than an incremental sort when the given path had
presorted keys.
Here we remove the 1.5x pessimism factor to allow incremental sorts to
have a fairer chance at being chosen against a full sort.
Previously we would generally create a sort path on the cheapest input
path (if that wasn't sorted already) and incremental sort paths on any
path which had presorted keys. This meant that if the cheapest input path
wasn't completely sorted but happened to have presorted keys, we would
create a full sort path *and* an incremental sort path on that input path.
Here we change this logic so that if there are presorted keys, we only
create an incremental sort path, and create sort paths only when a full
sort is required.
Both the removal of the cost pessimism factor and the changes made to the
path generation make it more likely that incremental sorts will now be
chosen. That, of course, as with teaching the planner any new tricks,
means an increased likelihood that the planner will perform an incremental
sort when it's not the best method. Our standard escape hatch for these
cases is an enable_* GUC. enable_incremental_sort already exists for
this.
This came out of a report by Pavel Luzanov where he mentioned that the
master branch was choosing to perform a Seq Scan -> Sort -> Group
Aggregate for his query with an ORDER BY aggregate function. The v15 plan
for his query performed an Index Scan -> Group Aggregate, of course, the
aggregate performed the final sort internally in nodeAgg.c for the
aggregate's ORDER BY. The ideal plan would have been to use the index,
which provided partially sorted input then use an incremental sort to
provide the aggregate with the sorted input. This was not being chosen
due to the pessimism in the incremental sort cost modal, so here we remove
that and rationalize the path generation so that sort and incremental sort
plans don't have to needlessly compete. We assume that it's senseless
to ever use a full sort on a given input path where an incremental sort
can be performed.
Reported-by: Pavel Luzanov
Reviewed-by: Richard Guo
Discussion: https://postgr.es/m/9f61ddbf-2989-1536-b31e-6459370a6baa%40postgrespro.ru
We chose a specific wording of the not-implemented errors for
pseudotype I/O functions and other cases where there's little
value in implementing input and/or output. gtsvectorin never
got that memo though, nor did most of contrib. Make these all
fall in line, mostly because I'm a neatnik but also to remove
unnecessary translatable strings.
gbtreekey_in needs a bit of extra love since it supports
multiple SQL types. Sadly, gbtreekey_out doesn't have the
ability to do that, but I think it's unreachable anyway.
Noted while surveying datatype input functions to see what we
have left to fix.
Pay down some ancient technical debt (dating to commit 022fd9966):
fix a couple of places in datetime parsing that were throwing
ereport's immediately instead of returning a DTERR code that could be
interpreted by DateTimeParseError. The reason for that was that there
was no mechanism for passing any auxiliary data (such as a zone name)
to DateTimeParseError, and these errors seemed to really need it.
Up to now it didn't matter that much just where the error got thrown,
but now we'd like to have a hard policy that datetime parse errors
get thrown from just the one place.
Hence, invent a "DateTimeErrorExtra" struct that can be used to
carry any extra values needed for specific DTERR codes. Perhaps
in the future somebody will be motivated to use this to improve
the specificity of other DateTimeParseError messages, but for now
just deal with the timezone-error cases.
This is on the way to making the datetime input functions report
parse errors softly; but it's really an independent change, so
commit separately.
Discussion: https://postgr.es/m/3bbbb0df-7382-bf87-9737-340ba096e034@postgrespro.ru
This patch converts the input functions for bool, int2, int4, int8,
float4, float8, numeric, and contrib/cube to the new soft-error style.
array_in and record_in are also converted. There's lots more to do,
but this is enough to provide proof-of-concept that the soft-error
API is usable, as well as reference examples for how to convert
input functions.
This patch is mostly by me, but it owes very substantial debt to
earlier work by Nikita Glukhov, Andrew Dunstan, and Amul Sul.
Thanks to Andres Freund for review.
Discussion: https://postgr.es/m/3bbbb0df-7382-bf87-9737-340ba096e034@postgrespro.ru
To run all tests that support running against existing server:
$ meson test --setup running
To run just the main pg_regress tests against existing server:
$ meson test --setup running regress-running/regress
To ensure the 'running' setup continues to work, test it as part of the
freebsd CI task.
Discussion: https://postgr.es/m/CAH2-Wz=XDQcmLoo7RR_i6FKQdDmcyb9q5gStnfuuQXrOGhB2sQ@mail.gmail.com
Currently, information about the permissions to be checked on relations
mentioned in a query is stored in their range table entries. So the
executor must scan the entire range table looking for relations that
need to have permissions checked. This can make the permission checking
part of the executor initialization needlessly expensive when many
inheritance children are present in the range range. While the
permissions need not be checked on the individual child relations, the
executor still must visit every range table entry to filter them out.
This commit moves the permission checking information out of the range
table entries into a new plan node called RTEPermissionInfo. Every
top-level (inheritance "root") RTE_RELATION entry in the range table
gets one and a list of those is maintained alongside the range table.
This new list is initialized by the parser when initializing the range
table. The rewriter can add more entries to it as rules/views are
expanded. Finally, the planner combines the lists of the individual
subqueries into one flat list that is passed to the executor for
checking.
To make it quick to find the RTEPermissionInfo entry belonging to a
given relation, RangeTblEntry gets a new Index field 'perminfoindex'
that stores the corresponding RTEPermissionInfo's index in the query's
list of the latter.
ExecutorCheckPerms_hook has gained another List * argument; the
signature is now:
typedef bool (*ExecutorCheckPerms_hook_type) (List *rangeTable,
List *rtePermInfos,
bool ereport_on_violation);
The first argument is no longer used by any in-core uses of the hook,
but we leave it in place because there may be other implementations that
do. Implementations should likely scan the rtePermInfos list to
determine which operations to allow or deny.
Author: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/CA+HiwqGjJDmUhDSfv-U2qhKJjt9ST7Xh9JXC_irsAQ1TAUsJYg@mail.gmail.com
A future commit will move the checkAsUser field from RangeTblEntry
to a new node that, unlike RTEs, will only be created for tables
mentioned in the query but not for the inheritance child relations
added to the query by the planner. So, checkAsUser value for a
given child relation will have to be obtained by referring to that
for its ancestor mentioned in the query.
In preparation, it seems better to expand the use of RelOptInfo.userid
during planning in place of rte->checkAsUser so that there will be
fewer places to adjust for the above change.
Given that the child-to-ancestor mapping is not available during the
execution of a given "child" ForeignScan node, add a checkAsUser
field to ForeignScan to carry the child relation's RelOptInfo.userid.
Author: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/CA+HiwqGFCs2uq7VRKi7g+FFKbP6Ea_2_HkgZb2HPhUfaAKT3ng@mail.gmail.com
Commit b663a4136, which allowed FDWs to INSERT rows in bulk, added to
nodeModifyTable.c code to flush pending inserts to the foreign-table
result relation(s) before completing processing of the ModifyTable node,
but the code failed to take into account the case where the INSERT query
has modifying CTEs, leading to incorrect results.
Also, that commit failed to flush pending inserts before firing BEFORE
ROW triggers so that rows are visible to such triggers.
In that commit we scanned through EState's
es_tuple_routing_result_relations or es_opened_result_relations list to
find the foreign-table result relations to which pending inserts are
flushed, but that would be inefficient in some cases. So to fix, 1) add
a List member to EState to record the insert-pending result relations,
and 2) modify nodeModifyTable.c so that it adds the foreign-table result
relation to the list in ExecInsert() if appropriate, and flushes pending
inserts properly using the list where needed.
While here, fix a copy-and-pasteo in a comment in ExecBatchInsert(),
which was added by that commit.
Back-patch to v14 where that commit appeared.
Discussion: https://postgr.es/m/CAPmGK16qutyCmyJJzgQOhfBq%3DNoGDqTB6O0QBZTihrbqre%2BoxA%40mail.gmail.com
These functions have been marked parallel safe, but the buildfarm's
response to commit e2933a6e1 exposed the flaw in that thinking:
if you try to use them on a temporary table, and they run inside
a parallel worker, they'll fail with "cannot access temporary tables
during a parallel operation".
Fix that by marking them parallel restricted instead. Maybe someday
we'll have a better answer and can reverse this decision.
Back-patch to v15. To go back further, we'd have to devise variant
versions of pre-1.10 pageinspect versions. Given the lack of field
complaints, it doesn't seem worth the trouble. We'll just deem
this case unsupported pre-v15. (If anyone does complain, it might
be good enough to update the markings manually in their DBs.)
Discussion: https://postgr.es/m/E1ox94a-000EHu-VH@gemulon.postgresql.org
pageinspect has occasionally failed on slow buildfarm members,
with symptoms indicating that the expected effects of VACUUM
FREEZE didn't happen. This is presumably because a background
transaction such as auto-analyze was holding back global xmin.
We can work around that by using a temp table in the test.
Since commit a7212be8b, that will use an up-to-date cutoff xmin
regardless of other processes. And pageinspect itself shouldn't
really care whether the table is temp.
Back-patch to v14. There would be no point in older branches
without back-patching a7212be8b, which seems like more trouble
than the problem is worth.
Discussion: https://postgr.es/m/2892135.1668976646@sss.pgh.pa.us
Instead of dozens of mostly-duplicate pg_foo_aclcheck() functions,
write one common function object_aclcheck() that can handle almost all
of them. We already have all the information we need, such as which
system catalog corresponds to which catalog table and which column is
the ACL column.
There are a few pg_foo_aclcheck() that don't work via the generic
function and have special APIs, so those stay as is.
I also changed most pg_foo_aclmask() functions to static functions,
since they are not used outside of aclchk.c.
Reviewed-by: Corey Huinker <corey.huinker@gmail.com>
Reviewed-by: Antonin Houska <ah@cybertec.at>
Discussion: https://www.postgresql.org/message-id/flat/95c30f96-4060-2f48-98b5-a4392d3b6066@enterprisedb.com
Instead of dozens of mostly-duplicate pg_foo_ownercheck() functions,
write one common function object_ownercheck() that can handle almost
all of them. We already have all the information we need, such as
which system catalog corresponds to which catalog table and which
column is the owner column.
Reviewed-by: Corey Huinker <corey.huinker@gmail.com>
Reviewed-by: Antonin Houska <ah@cybertec.at>
Discussion: https://www.postgresql.org/message-id/flat/95c30f96-4060-2f48-98b5-a4392d3b6066@enterprisedb.com
Test files should now ignore has_wal_read_bug() so long as
wait_for_catchup() is their only known way of reaching the bug. That's
at least five files today, a number expected to grow over time. This
commit removes skip logic from three. By doing so, systems having the
bug regain the ability to catch other kinds of defects via those three
tests. The other two, 002_databases.pl and 031_recovery_conflict.pl,
have been unprotected. Back-patch to v15, where done_testing() first
became our standard.
Discussion: https://postgr.es/m/20221030031639.GA3082137@rfd.leadboat.com
The planner simplifies boolean comparisons such as "x = true" and
"x = false" down to "x" and "NOT x" respectively, to have a canonical
form to ease comparisons. However, if we want to use an index on x,
the index AM APIs require us to reconstitute the comparison-operator
form of the indexqual. While that works, in bitmap indexscans the
canonical form of the qual was emitted as a "filter" condition
although it really only needs to be a "recheck" condition, because
create_bitmap_scan_plan didn't recognize the equivalence of that
form with the generated indexqual. booleq() is pretty cheap so that
likely doesn't make very much difference, but it's unsightly so
let's clean it up.
To fix, add a case to predicate_implied_by() to recognize the
equivalence of such clauses. This is a relatively low-cost place to
add a check, and perhaps it will have additional use cases in future.
Richard Guo and Tom Lane, per discussion of bug #17618 from Sindy
Senorita.
Discussion: https://postgr.es/m/17618-7a2240bfaa7e84ae@postgresql.org
When executing a utility statement, we must fetch everything
we need out of the PlannedStmt data structure before calling
standard_ProcessUtility. In certain cases (possibly only ROLLBACK
in extended query protocol), that data structure will get freed
during command execution. The situation is probably often harmless
in production builds, but in debug builds we intentionally overwrite
the freed memory with garbage, leading to picking up garbage values
of statement location and length, typically causing an assertion
failure later in pg_stat_statements. In non-debug builds, if
something did go wrong it would likely lead to storing garbage
for the query string.
Report and fix by zhaoqigui (with cosmetic adjustments by me).
It's an old problem, so back-patch to all supported versions.
Discussion: https://postgr.es/m/17663-a344fd0675f92128@postgresql.org
Discussion: https://postgr.es/m/1667307420050.56657@hundsun.com
This is similar to 7d25958, and this commit takes care of all the
remaining inconsistencies between the initial value used in the C
variable associated to a GUC and its default value stored in the GUC
tables (as of pg_settings.boot_val).
Some of the initial values of the GUCs updated rely on a compile-time
default. These are refactored so as the GUC table and its C declaration
use the same values. This makes everything consistent with other
places, backend_flush_after, bgwriter_flush_after, port,
checkpoint_flush_after doing so already, for example.
Extracted from a larger patch by Peter Smith. The spots updated in the
modules are from me.
Author: Peter Smith, Michael Paquier
Reviewed-by: Nathan Bossart, Tom Lane, Justin Pryzby
Discussion: https://postgr.es/m/CAHut+PtHE0XSfjjRQ6D4v7+dqzCw=d+1a64ujra4EX8aoc_Z+w@mail.gmail.com
When we decide we need to make a derived clause equating a.x and
b.y, we already will re-use a previously-made clause "a.x = b.y".
But we might instead have "b.y = a.x", which is perfectly usable
because equivclass.c has never promised anything about the
operand order in clauses it builds. Saving construction of a
new RestrictInfo doesn't matter all that much in itself --- but
because we cache selectivity estimates and so on per-RestrictInfo,
there's a possibility of saving a fair amount of duplicative
effort downstream.
Hence, check for commutative matches as well as direct ones when
seeing if we have a pre-existing clause. This changes the visible
clause order in several regression test cases, but they're all
clearly-insignificant changes.
Checking for the reverse operand order is simple enough, but
if we wanted to check for operator OID match we'd need to call
get_commutator here, which is not so cheap. I concluded that
we don't really need the operator check anyway, so I just
removed it. It's unlikely that an opfamily contains more than
one applicable operator for a given pair of operand datatypes;
and if it does they had better give the same answers, so there
seems little need to insist that we use exactly the one
select_equality_operator chose.
Using the current core regression suite as a test case, I see
this change reducing the number of new join clauses built by
create_join_clause from 9673 to 5142 (out of 26652 calls).
So not quite 50% savings, but pretty close to it.
Discussion: https://postgr.es/m/78062.1666735746@sss.pgh.pa.us
When the logical decoding restarts from NEW_CID, since there is no
association between the top transaction and its subtransaction, both are
created as top transactions and have the same LSN. This caused the
assertion failure in AssertTXNLsnOrder().
This patch skips the assertion check until we reach the LSN at which we
start decoding the contents of the transaction, specifically
start_decoding_at LSN in SnapBuild. This is okay because we don't
guarantee to make the association between top transaction and
subtransaction until we try to decode the actual contents of transaction.
The ordering of the records prior to the start_decoding_at LSN should have
been checked before the restart.
The other assertion failure is due to the reason that we forgot to track
that we have considered top-level transaction id in the list of catalog
changing transactions that were committed when one of its subtransactions
is marked as containing catalog change.
Reported-by: Tomas Vondra, Osumi Takamichi
Author: Masahiko Sawada, Kuroda Hayato
Reviewed-by: Amit Kapila, Dilip Kumar, Kuroda Hayato, Kyotaro Horiguchi, Masahiko Sawada
Backpatch-through: 10
Discussion: https://postgr.es/m/a89b46b6-0239-2fd5-71a9-b19b1f7a7145%40enterprisedb.com
Discussion: https://postgr.es/m/TYCPR01MB83733C6CEAE47D0280814D5AED7A9%40TYCPR01MB8373.jpnprd01.prod.outlook.com
Preprocessing of the HAVING clause will reduce havingQual to NIL
if the clause is constant-TRUE. This is one case where that
convention is rather unfortunate, because "HAVING TRUE" is not at all
the same as not having any HAVING clause at all. (Per the SQL spec,
it still forces the query to be grouped.) The planner deals with this
by having a boolean hasHavingQual that records whether havingQual was
originally nonempty; places that just want to check whether HAVING
was specified are supposed to consult that.
I found three places that got that wrong. Fortunately, these could
only affect cost estimates not correctness. It'd be hard even
to demonstrate the errors; for example, the one in allpaths.c would
only matter in a query that has HAVING TRUE but no GROUP BY and no
aggregates, which would require a completely variable-free SELECT
list, making the case probably of only academic interest. Hence,
while these are worth fixing before someone copies the incorrect
coding somewhere more critical, they don't seem worth back-patching.
I didn't bother trying to devise regression tests, either.
Discussion: https://postgr.es/m/2503888.1666042643@sss.pgh.pa.us
Per discussion, the existing routine name able to initialize a SRF
function with materialize mode is unpopular, so rename it. Equally, the
flags of this function are renamed, as of:
- SRF_SINGLE_USE_EXPECTED -> MAT_SRF_USE_EXPECTED_DESC
- SRF_SINGLE_BLESS -> MAT_SRF_BLESS
The previous function and flags introduced in 9e98583 are kept around
for compatibility purposes, so as any extension code already compiled
with v15 continues to work as-is. The declarations introduced here for
compatibility will be removed from HEAD in a follow-up commit.
The new names have been suggested by Andres Freund and Melanie
Plageman.
Discussion: https://postgr.es/m/20221013194820.ciktb2sbbpw7cljm@awork3.anarazel.de
Backpatch-through: 15
The file name used for its temporary destination, before renaming it to
the real deal, has been using a microseconds in a timestamp aimed to be
originally in milli-seconds. This is harmless as this is aimed at being
a safeguard against name collisions (note MyProcPid in the name), but
let's be correct with the maths.
While on it, add a note in the module's makefile to document why
installcheck is not supported.
Author: Nathan Bossart
Reviewed-by: Bharath Rupireddy
Discussion: https://postgr.es/m/20221014044106.GA1673343@nathanxps13
Backpatch-through: 15
While directly targetting a foreign table with MERGE was already
expressly forbidden, we failed to catch the case of a partitioned table
that has a foreign table as a partition; and the result if you try is an
incomprehensible error. Fix that by adding a specific check.
Backpatch to 15.
Reported-by: Tatsuhiro Nakamori <bt22nakamorit@oss.nttdata.com>
Discussion: https://postgr.es/m/bt22nakamorit@oss.nttdata.com
Most code prints PIDs as %d, but some code tried to print them as long
or unsigned long. While this is in theory allowed, the fact that PIDs
fit into int is deeply baked into all PostgreSQL code, so these random
deviations don't accomplish anything except confusion.
Note that we still need casts from pid_t to int, because on 64-bit
MinGW, pid_t is long long int. (But per above, actually supporting
that range in PostgreSQL code would be major surgery and probably not
useful.)
Discussion: https://www.postgresql.org/message-id/289c2e45-c7d9-5ce4-7eff-a9e2a33e1580@enterprisedb.com
This is a follow-up commit to ca7f8e2 which removed the allocation
abstraction from pgcrypto and replaced px_alloc + memset calls with
palloc0 calls. The particular memset in this commit was missed in
that work though.
Author: Zhihong Yu <zyu@yugabyte.com>
Reviewed-by: Bruce Momjian <bruce@momjian.us>
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Discussion: https://postgr.es/m/CALNJ-vT5qRucrFMPSzQyAWods1b4MnNPG-M=_ZUzh1SoTh0vNw@mail.gmail.com
Using pg_buffercache_summary() is significantly cheaper than querying
pg_buffercache and summarizing in SQL.
Author: Melih Mutlu <m.melihmutlu@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Reviewed-by: Zhang Mingli <zmlpostgres@gmail.com>
Discussion: https://postgr.es/m/CAGPVpCQAXYo54Q%3D8gqBsS%3Du0uk9qhnnq4%2B710BtUhUisX1XGEg%40mail.gmail.com
Commit 3d956d956 allowed the COPY, but it's done by inserting individual
rows to the foreign table, so it can be inefficient due to the overhead
caused by each round-trip to the foreign server. To improve performance
of the COPY in such a case, this patch allows batch insertion, by
extending the multi-insert machinery in CopyFrom() to the foreign-table
case so that we insert multiple rows to the foreign table at once using
the FDW callback routine added by commit b663a4136. This patch also
allows this for postgres_fdw. It is enabled by the "batch_size" option
added by commit b663a4136, which is disabled by default.
When doing batch insertion, we update progress of the COPY command after
performing the FDW callback routine, to count rows not suppressed by the
FDW as well as a BEFORE ROW INSERT trigger. For consistency, this patch
changes the timing of updating it for plain tables: previously, we
updated it immediately after adding each row to the multi-insert buffer,
but we do so only after writing the rows stored in the buffer out to the
table using table_multi_insert(), which I think would be consistent even
with non-batching mode, because in that mode we update it after writing
each row out to the table using table_tuple_insert().
Andrey Lepikhov, heavily revised by me, with review from Ian Barwick,
Andrey Lepikhov, and Zhihong Yu.
Discussion: https://postgr.es/m/bc489202-9855-7550-d64c-ad2d83c24867%40postgrespro.ru
Remove the Trap and TrapMacro macros, which were nearly unused
and confusingly had the opposite condition polarity from the
otherwise-functionally-equivalent Assert macros.
Having done that, it's very hard to justify carrying the errorType
argument of ExceptionalCondition, so drop that too, and just
let it assume everything's an Assert. This saves about 64K
of code space as of current HEAD.
Discussion: https://postgr.es/m/3928703.1665345117@sss.pgh.pa.us
Instead of Abs() for int64, use the C standard functions labs() or
llabs() as appropriate. Define a small wrapper around them that
matches our definition of int64. (labs() is C90, llabs() is C99.)
Reviewed-by: Zhang Mingli <zmlpostgres@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/4beb42b5-216b-bce8-d452-d924d5794c63%40enterprisedb.com
This substantially speeds up building for windows, due to the vast amount of
headers included via windows.h. A cross build from linux targetting mingw goes
from
994.11user 136.43system 0:31.58elapsed 3579%CPU
to
422.41user 89.05system 0:14.35elapsed 3562%CPU
The wins on windows are similar-ish (but I don't have a system at hand just
now for actual numbers). Targetting other operating systems the wins are far
smaller (tested linux, macOS, FreeBSD).
For now precompiled headers are disabled by default, it's not clear how well
they work on all platforms. E.g. on FreeBSD gcc doesn't seem to have working
support, but clang does.
When doing a full build precompiled headers are only beneficial for targets
with multiple .c files, as meson builds a separate precompiled header for each
target (so that different compilation options take effect). This commit
therefore only changes target with at least two .c files to use precompiled
headers.
Because this commit adds b_pch=false to the default_options new build
directories will have precompiled headers disabled by default, however
existing build directories will continue use the default value of b_pch, which
is true.
Note that using precompiled headers with ccache requires setting
CCACHE_SLOPPINESS=pch_defines,time_macros to get hits.
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/CA+hUKG+50eOUbN++ocDc0Qnp9Pvmou23DSXu=ZA6fepOcftKqA@mail.gmail.com
Discussion: https://postgr.es/m/c5736f70-bb6d-8d25-e35c-e3d886e4e905@enterprisedb.com
Discussion: https://postgr.es/m/20190826054000.GE7005%40paquier.xyz
The t_iseq() macro does not need to be guarded by a character
length check (at least when the comparison value is an ASCII
character, as its documentation requires). Some portions of
contrib/ltree hadn't read that memo, so simplify them.
The last change in gettoken_query,
- else if (charlen == 1 && !t_iseq(state->buf, ' '))
+ else if (!t_iseq(state->buf, ' '))
looks like it's actually a bug fix: I doubt that the intention
was to silently ignore multibyte characters as if they were
whitespace. I'm not tempted to back-patch though, because this
will have the effect of tightening what is allowed in ltxtquery
strings.
Discussion: https://postgr.es/m/2548310.1664999615@sss.pgh.pa.us
ts_locale.c omitted support for "isalnum" tests, perhaps on the
grounds that there were initially no use-cases for that. However,
both ltree and pg_trgm need such tests, and we do also have one
use-case now in the core backend. The workaround of testing
isalpha and isdigit separately seems quite inefficient, especially
when dealing with multibyte characters; so let's fill in the
missing support.
Discussion: https://postgr.es/m/2548310.1664999615@sss.pgh.pa.us
The generated resource files aren't exactly the same ones as the old
buildsystems generate. Previously "InternalName" and "OriginalFileName" were
mostly wrong / not set (despite being required), but that was hard to fix in
at least the make build. Additionally, the meson build falls back to a
"auto-generated" description when not set, and doesn't set it in a few cases -
unlikely that anybody looks at these descriptions in detail.
Author: Andres Freund <andres@anarazel.de>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
This reverts commit db0d67db24 and
several follow-on fixes. The idea of making a cost-based choice
of the order of the sorting columns is not fundamentally unsound,
but it requires cost information and data statistics that we don't
really have. For example, relying on procost to distinguish the
relative costs of different sort comparators is pretty pointless
so long as most such comparator functions are labeled with cost 1.0.
Moreover, estimating the number of comparisons done by Quicksort
requires more than just an estimate of the number of distinct values
in the input: you also need some idea of the sizes of the larger
groups, if you want an estimate that's good to better than a factor of
three or so. That's data that's often unknown or not very reliable.
Worse, to arrive at estimates of the number of calls made to the
lower-order-column comparison functions, the code needs to make
estimates of the numbers of distinct values of multiple columns,
which are necessarily even less trustworthy than per-column stats.
Even if all the inputs are perfectly reliable, the cost algorithm
as-implemented cannot offer useful information about how to order
sorting columns beyond the point at which the average group size
is estimated to drop to 1.
Close inspection of the code added by db0d67db2 shows that there
are also multiple small bugs. These could have been fixed, but
there's not much point if we don't trust the estimates to be
accurate in-principle.
Finally, the changes in cost_sort's behavior made for very large
changes (often a factor of 2 or so) in the cost estimates for all
sorting operations, not only those for multi-column GROUP BY.
That naturally changes plan choices in many situations, and there's
precious little evidence to show that the changes are for the better.
Given the above doubts about whether the new estimates are really
trustworthy, it's hard to summon much confidence that these changes
are better on the average.
Since we're hard up against the release deadline for v15, let's
revert these changes for now. We can always try again later.
Note: in v15, I left T_PathKeyInfo in place in nodes.h even though
it's unreferenced. Removing it would be an ABI break, and it seems
a bit late in the release cycle for that.
Discussion: https://postgr.es/m/TYAPR01MB586665EB5FB2C3807E893941F5579@TYAPR01MB5866.jpnprd01.prod.outlook.com
Commits cf112c12 and a0dc8271 were a little too hasty in getting rid of
the pg_ prefixes where we use pread(), pwrite() and vectored variants.
We dropped support for ancient Unixes where we needed to use lseek() to
implement replacements for those, but it turns out that Windows also
changes the current position even when you pass in an offset to
ReadFile() and WriteFile() if the file handle is synchronous, despite
its documentation saying otherwise.
Switching to asynchronous file handles would fix that, but have other
complications. For now let's just put back the pg_ prefix and add some
comments to highlight the non-standard side-effect, which we can now
describe as Windows-only.
Reported-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/20220923202439.GA1156054%40nathanxps13
There are still some alignment-related failures in the buildfarm,
which might or might not be able to be fixed quickly, but I've also
just realized that it increased the size of many WAL records by 4 bytes
because a block reference contains a RelFileLocator. The effect of that
hasn't been studied or discussed, so revert for now.
The previous macro implementations just cast the argument to a target
type but did not check whether the input type was appropriate. The
function implementation can do better type checking of the input type.
For the *GetDatumFast() macros, converting to an inline function
doesn't work in the !USE_FLOAT8_BYVAL case, but we can use
AssertVariableIsOfTypeMacro() to get a similar level of type checking.
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/8528fb7e-0aa2-6b54-85fb-0c0886dbd6ed%40enterprisedb.com
RelFileNumbers are now assigned using a separate counter, instead of
being assigned from the OID counter. This counter never wraps around:
if all 2^56 possible RelFileNumbers are used, an internal error
occurs. As the cluster is limited to 2^64 total bytes of WAL, this
limitation should not cause a problem in practice.
If the counter were 64 bits wide rather than 56 bits wide, we would
need to increase the width of the BufferTag, which might adversely
impact buffer lookup performance. Also, this lets us use bigint for
pg_class.relfilenode and other places where these values are exposed
at the SQL level without worrying about overflow.
This should remove the need to keep "tombstone" files around until
the next checkpoint when relations are removed. We do that to keep
RelFileNumbers from being recycled, but now that won't happen
anyway. However, this patch doesn't actually change anything in
this area; it just makes it possible for a future patch to do so.
Dilip Kumar, based on an idea from Andres Freund, who also reviewed
some earlier versions of the patch. Further review and some
wordsmithing by me. Also reviewed at various points by Ashutosh
Sharma, Vignesh C, Amul Sul, Álvaro Herrera, and Tom Lane.
Discussion: http://postgr.es/m/CA+Tgmobp7+7kmi4gkq7Y+4AM9fTvL+O1oQ4-5gFTT+6Ng-dQ=g@mail.gmail.com
We weren't jumbling the merge action list, so wildly different commands
would be considered to use the same query ID. Add that, mention it in
the docs, and some test lines.
Backpatch to 15.
Author: Tatsu <bt22nakamorit@oss.nttdata.com>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://postgr.es/m/d87e391694db75a038abc3b2597828e8@oss.nttdata.com
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in contrib code.
Like other recent commits that cleaned up function parameter names, this
commit was written with help from clang-tidy.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
Autoconf is showing its age, fewer and fewer contributors know how to wrangle
it. Recursive make has a lot of hard to resolve dependency issues and slow
incremental rebuilds. Our home-grown MSVC build system is hard to maintain for
developers not using Windows and runs tests serially. While these and other
issues could individually be addressed with incremental improvements, together
they seem best addressed by moving to a more modern build system.
After evaluating different build system choices, we chose to use meson, to a
good degree based on the adoption by other open source projects.
We decided that it's more realistic to commit a relatively early version of
the new build system and mature it in tree.
This commit adds an initial version of a meson based build system. It supports
building postgres on at least AIX, FreeBSD, Linux, macOS, NetBSD, OpenBSD,
Solaris and Windows (however only gcc is supported on aix, solaris). For
Windows/MSVC postgres can now be built with ninja (faster, particularly for
incremental builds) and msbuild (supporting the visual studio GUI, but
building slower).
Several aspects (e.g. Windows rc file generation, PGXS compatibility, LLVM
bitcode generation, documentation adjustments) are done in subsequent commits
requiring further review. Other aspects (e.g. not installing test-only
extensions) are not yet addressed.
When building on Windows with msbuild, builds are slower when using a visual
studio version older than 2019, because those versions do not support
MultiToolTask, required by meson for intra-target parallelism.
The plan is to remove the MSVC specific build system in src/tools/msvc soon
after reaching feature parity. However, we're not planning to remove the
autoconf/make build system in the near future. Likely we're going to keep at
least the parts required for PGXS to keep working around until all supported
versions build with meson.
Some initial help for postgres developers is at
https://wiki.postgresql.org/wiki/Meson
With contributions from Thomas Munro, John Naylor, Stone Tickle and others.
Author: Andres Freund <andres@anarazel.de>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Author: Peter Eisentraut <peter@eisentraut.org>
Reviewed-By: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20211012083721.hvixq4pnh2pixr3j@alap3.anarazel.de
The tlist of the EvalPlanQual outer plan for a ForeignScan node is
adjusted to produce a tuple whose descriptor matches the scan tuple slot
for the ForeignScan node. But in the case where the outer plan contains
an extra Sort node, if the new tlist contained columns required only for
evaluating PlaceHolderVars or columns required only for evaluating local
conditions, this would cause setrefs.c to fail with the error.
The cause of this is that when creating the outer plan by injecting the
Sort node into an alternative local join plan that could emit such extra
columns as well, we fail to arrange for the outer plan to propagate them
up through the Sort node, causing setrefs.c to fail to match up them in
the new tlist to what is available from the outer plan. Repair.
Per report from Alexander Pyhalov.
Richard Guo and Etsuro Fujita, reviewed by Alexander Pyhalov and Tom Lane.
Backpatch to all supported versions.
Discussion: http://postgr.es/m/cfb17bf6dfdf876467bd5ef533852d18%40postgrespro.ru
guc.c has grown to be one of our largest .c files, making it
a bottleneck for compilation. It's also acquired a bunch of
knowledge that'd be better kept elsewhere, because of our not
very good habit of putting variable-specific check hooks here.
Hence, split it up along these lines:
* guc.c itself retains just the core GUC housekeeping mechanisms.
* New file guc_funcs.c contains the SET/SHOW interfaces and some
SQL-accessible functions for GUC manipulation.
* New file guc_tables.c contains the data arrays that define the
built-in GUC variables, along with some already-exported constant
tables.
* GUC check/assign/show hook functions are moved to the variable's
home module, whenever that's clearly identifiable. A few hard-
to-classify hooks ended up in commands/variable.c, which was
already a home for miscellaneous GUC hook functions.
To avoid cluttering a lot more header files with #include "guc.h",
I also invented a new header file utils/guc_hooks.h and put all
the GUC hook functions' declarations there, regardless of their
originating module. That allowed removal of #include "guc.h"
from some existing headers. The fallout from that (hopefully
all caught here) demonstrates clearly why such inclusions are
best minimized: there are a lot of files that, for example,
were getting array.h at two or more levels of remove, despite
not having any connection at all to GUCs in themselves.
There is some very minor code beautification here, such as
renaming a couple of inconsistently-named hook functions
and improving some comments. But mostly this just moves
code from point A to point B and deals with the ensuing
needs for #include adjustments and exporting a few functions
that previously weren't exported.
Patch by me, per a suggestion from Andres Freund; thanks also
to Michael Paquier for the idea to invent guc_funcs.c.
Discussion: https://postgr.es/m/587607.1662836699@sss.pgh.pa.us
pgstattuple uses data type double for other percentage calculations
and exposes those values to the users via the float8 data type.
However, scanned_percent in struct output_type is of type uint64, even
though it is later returned via Float8GetDatum(). Change it to use
double to be inline with other percentages.
Author: Bharath Rupireddy
Reviewed-by: Peter Eisentraut
Discussion: https://www.postgresql.org/message-id/36ee692b-232f-0484-ce94-dc39d82021ad%40enterprisedb.com
pg_walinspect uses datatype double (double precision floating point
number) for WAL stats percentile calculations and expose them via
float4 (single precision floating point number), which an unnecessary
loss of precision and confusing. Even though, it's harmless that way,
let's use float8 (double precision floating-point number) to be in
sync with what pg_walinspect does internally and what it exposes to
the users. This seems to be the pattern used elsewhere in the code.
Reported-by: Peter Eisentraut
Author: Bharath Rupireddy
Reviewed-by: Peter Eisentraut
Discussion: https://www.postgresql.org/message-id/36ee692b-232f-0484-ce94-dc39d82021ad%40enterprisedb.com
When using the BSD UUID functions, contrib/uuid-ossp expects
uuid_create() to produce a version-1 UUID. FreeBSD still does so,
but in recent NetBSD releases that function produces a version-4
(random) UUID instead. That's not acceptable for our purposes:
if the user wanted v4 she would have asked for v4, not v1.
Hence, check the version digit and complain if it's not '1'.
Also drop the documentation's claim that the NetBSD implementation
is usable. It might be, depending on which OS version you're using,
but we're not going to get into that kind of detail.
(Maybe someday we should ditch all these external libraries
and just write our own UUID code, but today is not that day.)
Nazir Bilal Yavuz, with cosmetic adjustments and docs by me.
Backpatch to all supported versions.
Discussion: https://postgr.es/m/3848059.1661038772@sss.pgh.pa.us
Discussion: https://postgr.es/m/17358-89806e7420797025@postgresql.org
Since the retirement of some older buildfarm members, the oldest Bison
that gets regular testing is 2.3. MacOS ships that version, and will
continue doing so for the forseeable future because of Apple's policy
regarding GPLv3. While Mac users could use a package manager to install
a newer version, there is no compelling reason to force them do so at
this time.
Reviewed by Andres Freund
Discussion: https://www.postgresql.org/message-id/1097762.1662145681@sss.pgh.pa.us
In a similar effort to f736e188c and 110d81728, fixup various usages of
string functions where a more appropriate function is available and more
fit for purpose.
These changes include:
1. Use cstring_to_text_with_len() instead of cstring_to_text() when
working with a StringInfoData and the length can easily be obtained.
2. Use appendStringInfoString() instead of appendStringInfo() when no
formatting is required.
3. Use pstrdup(...) instead of psprintf("%s", ...)
4. Use pstrdup(...) instead of psprintf(...) (with no formatting)
5. Use appendPQExpBufferChar() instead of appendPQExpBufferStr() when the
length of the string being appended is 1.
6. appendStringInfoChar() instead of appendStringInfo() when no formatting
is required and string is 1 char long.
7. Use appendPQExpBufferStr(b, .) instead of appendPQExpBuffer(b, "%s", .)
8. Don't use pstrdup when it's fine to just point to the string constant.
I (David) did find other cases of #8 but opted to use #4 instead as I
wasn't certain enough that applying #8 was ok (e.g in hba.c)
Author: Ranier Vilela, David Rowley
Discussion: https://postgr.es/m/CAApHDvo2j2+RJBGhNtUz6BxabWWh2Jx16wMUMWKUjv70Ver1vg@mail.gmail.com
Since these macros just cast whatever you give them to the designated
output type, and many normal uses also cast the output type further, a
number of incorrect uses go undiscovered. The fixes in this patch
have been discovered by changing these macros to inline functions,
which is the subject of a future patch.
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Discussion: https://www.postgresql.org/message-id/flat/8528fb7e-0aa2-6b54-85fb-0c0886dbd6ed%40enterprisedb.com
Calculating similarity between large strings can be timesconsuming
and overrun configured statement timeouts. Check for interrupts in
the main loop to ensure query cancellation can be performed.
Author: Robins Tharakan <tharakan@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAEP4nAxvmfc_XWTz73bqXRhgjONi=1HaX4_NhsopA3L6UvnN1g@mail.gmail.com
The planner has to special-case indexes on boolean columns, because
what we need for an indexscan on such a column is a qual of the shape
of "boolvar = pseudoconstant". For plain bool constants, previous
simplification will have reduced this to "boolvar" or "NOT boolvar",
and we have to reverse that if we want to make an indexqual. There is
existing code to do so, but it only fires when the index's opfamily
is BOOL_BTREE_FAM_OID or BOOL_HASH_FAM_OID. Thus extension AMs, or
extension opclasses such as contrib/btree_gin, are out in the cold.
The reason for hard-wiring the set of relevant opfamilies was mostly
to avoid a catalog lookup in a hot code path. We can improve matters
while not taking much of a performance hit by relying on the
hard-wired set when the opfamily OID is visibly built-in, and only
checking the catalogs when dealing with an extension opfamily.
While here, rename IsBooleanOpfamily to IsBuiltinBooleanOpfamily
to remind future users of that macro of its limitations. At some
point we might want to make indxpath.c's improved version of the
test globally accessible, but it's not presently needed elsewhere.
Zongliang Quan and Tom Lane
Discussion: https://postgr.es/m/f293b91d-1d46-d386-b6bb-4b06ff5c667b@yeah.net
Oversight in commit 418ec3207: it's better to do it like this,
else you have to drop and recreate the extension for each
permutation. tcn.spec only has one permutation at present,
so this doesn't speed it up any, but it's still a bad example.
It has been incorrectly assumed in commit 7f13ac8123 that we can either
purge all or none in the catalog modifying xids list retrieved from a
serialized snapshot. It is quite possible that some of the xids in that
array are old enough to be pruned but not others.
As per buildfarm
Author: Amit Kapila and Masahiko Sawada
Reviwed-by: Masahiko Sawada
Discussion: https://postgr.es/m/CAA4eK1LBtv6ayE+TvCcPmC-xse=DVg=SmbyQD1nv_AaqcpUJEg@mail.gmail.com
quote_identifier's API is designed on the assumption that it's
not worth worrying about a short-term memory leak when we have
to produce a quoted version of the given identifier. Whoever wrote
quote_object_name took it on themselves to override that judgment,
but the only way to do so is to cast away const someplace. We can
avoid that and substantially shorten the function by going along
with quote_identifier's opinion. AFAICS quote_object_name is not
used in any way where this would be unsustainable.
Per discussion of commit 45987aae2, which exposed that we had
a casting-away-const situation here.
Discussion: https://postgr.es/m/20220827112304.GL2342@telsasoft.com
Commit 121d2d3d70 included simd.h into pg_wchar.h. This caused a problem
on Windows, since Perl has "#define free" (referring to globals), which
breaks the Windows' header. To fix, move the static inline function
definitions from plperl_helpers.h, into plperl.h, where we already
document the necessary inclusion order. Since those functions were the
only reason for the existence of plperl_helpers.h, remove it.
First reported by Justin Pryzby
Diagnosis and review by Andres Freund, patch by myself per suggestion
from Tom Lane
Discussion: https://www.postgresql.org/message-id/20220826115546.GE2342%40telsasoft.com
This is preparatory work for a project to increase the number of bits
in a RelFileNumber from 32 to 56.
Along the way, introduce static inline accessor functions for a couple
of BufferTag fields.
Dilip Kumar, reviewed by me. The overall patch series has also had
review at various times from Andres Freund, Ashutosh Sharma, Hannu
Krosing, Vignesh C, Álvaro Herrera, and Tom Lane.
Discussion: http://postgr.es/m/CAFiTN-trubju5YbWAq-BSpZ90-Z6xCVBQE8BVqXqANOZAF1Znw@mail.gmail.com
Usage of ReadNextXLogRecord()'s first_record parameter for error
reporting isn't always correct. For instance, in GetWALRecordsInfo()
and GetWalStats(), we're reading multiple records, and first_record
is always passed as the LSN of the first record which is then used
for error reporting for later WAL record read failures. This isn't
correct.
The correct parameter to use for error reports in case of WAL
reading failures is xlogreader->EndRecPtr. This change fixes it.
While on it, removed an unnecessary Assert in pg_walinspect code.
Reported-by: Robert Haas
Author: Bharath Rupireddy
Reviewed-by: Robert Haas
Discussion: https://www.postgresql.org/message-id/CA%2BTgmoZAOGzPUifrcZRjFZ2vbtcw3mp-mN6UgEoEcQg6bY3OVg%40mail.gmail.com
Backpatch-through: 15
Previously, we relied on HEAP2_NEW_CID records and XACT_INVALIDATION
records to know if the transaction has modified the catalog, and that
information is not serialized to snapshot. Therefore, after the restart,
if the logical decoding decodes only the commit record of the transaction
that has actually modified a catalog, we will miss adding its XID to the
snapshot. Thus, we will end up looking at catalogs with the wrong
snapshot.
To fix this problem, this change adds the list of transaction IDs and
sub-transaction IDs, that have modified catalogs and are running during
snapshot serialization, to the serialized snapshot. After restart or
otherwise, when we restore from such a serialized snapshot, the
corresponding list is restored in memory. Now, when decoding a COMMIT
record, we check both the list and the ReorderBuffer to see if the
transaction has modified catalogs.
Since this adds additional information to the serialized snapshot, we
cannot backpatch it. For back branches, we took another approach.
We remember the last-running-xacts list of the decoded RUNNING_XACTS
record after restoring the previously serialized snapshot. Then, we mark
the transaction as containing catalog changes if it's in the list of
initial running transactions and its commit record has
XACT_XINFO_HAS_INVALS. This doesn't require any file format changes but
the transaction will end up being added to the snapshot even if it has
only relcache invalidations. But that won't be a problem since we use
snapshot built during decoding only to read system catalogs.
This commit bumps SNAPBUILD_VERSION because of a change in SnapBuild.
Reported-by: Mike Oh
Author: Masahiko Sawada
Reviewed-by: Amit Kapila, Shi yu, Takamichi Osumi, Kyotaro Horiguchi, Bertrand Drouvot, Ahsan Hadi
Backpatch-through: 10
Discussion: https://postgr.es/m/81D0D8B0-E7C4-4999-B616-1E5004DBDCD2%40amazon.com
When inserting a view referencing a foreign table that has WITH CHECK
OPTION constraints, in single-insert mode postgres_fdw retrieves the
data that was actually inserted on the remote side so that the WITH
CHECK OPTION constraints are enforced with the data locally, but in
batch-insert mode it cannot currently retrieve the data (except for the
row first inserted through the view), resulting in enforcing the WITH
CHECK OPTION constraints with the data passed from the core (except for
the first-inserted row), which led to incorrect results when inserting
into a view referencing a foreign table in which a remote BEFORE ROW
INSERT trigger changes the rows inserted through the view so that they
violate the view's WITH CHECK OPTION constraint. Also, the query
inserting into the view caused an assertion failure in assert-enabled
builds.
Fix these by disabling batch insertion when inserting into such a view.
Back-patch to v14 where batch insertion was added.
Discussion: https://postgr.es/m/CAPmGK17LpbTZs4m4a_6THP54UBeK9fHvX8aVVA%2BC6yEZDZwQcg%40mail.gmail.com
pread() and pwrite() are in SUSv2, and all targeted Unix systems have
them.
Previously, we defined pg_pread and pg_pwrite to emulate these function
with lseek() on old Unixen. The names with a pg_ prefix were a reminder
of a portability hazard: they might change the current file position.
That hazard is gone, so we can drop the prefixes.
Since the remaining replacement code is Windows-only, move it into
src/port/win32p{read,write}.c, and move the declarations into
src/include/port/win32_port.h.
No need for vestigial HAVE_PREAD, HAVE_PWRITE macros as they were only
used for declarations in port.h which have now moved into win32_port.h.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Greg Stark <stark@mit.edu>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJ3LHeP9w5Fgzdr4G8AnEtJ=z=p6hGDEm4qYGEUX5B6fQ@mail.gmail.com
We've heard a couple of reports of people having trouble with
multi-gigabyte-sized query-texts files. It occurred to me that on
32-bit platforms, there could be an issue with integer overflow
of calculations associated with the total query text size.
Address that with several changes:
1. Limit pg_stat_statements.max to INT_MAX / 2 not INT_MAX.
The hashtable code will bound it to that anyway unless "long"
is 64 bits. We still need overflow guards on its use, but
this helps.
2. Add a check to prevent extending the query-texts file to
more than MaxAllocHugeSize. If it got that big, qtext_load_file
would certainly fail, so there's not much point in allowing it.
Without this, we'd need to consider whether extent, query_offset,
and related variables shouldn't be off_t not size_t.
3. Adjust the comparisons in need_gc_qtexts() to be done in 64-bit
arithmetic on all platforms. It appears possible that under duress
those multiplications could overflow 32 bits, yielding a false
conclusion that we need to garbage-collect the texts file, which
could lead to repeatedly garbage-collecting after every hash table
insertion.
Per report from Bruno da Silva. I'm not convinced that these
issues fully explain his problem; there may be some other bug that's
contributing to the query-texts file becoming so large in the first
place. But it did get that big, so #2 is a reasonable defense,
and #3 could explain the reported performance difficulties.
(See also commit 8bbe4cbd9, which addressed some related bugs.
The second Discussion: link is the thread that led up to that.)
This issue is old, and is primarily a problem for old platforms,
so back-patch.
Discussion: https://postgr.es/m/CAB+Nuk93fL1Q9eLOCotvLP07g7RAv4vbdrkm0cVQohDVMpAb9A@mail.gmail.com
Discussion: https://postgr.es/m/5601D354.5000703@BlueTreble.com
ORDER BY / DISTINCT aggreagtes have, since implemented in Postgres, been
executed by always performing a sort in nodeAgg.c to sort the tuples in
the current group into the correct order before calling the transition
function on the sorted tuples. This was not great as often there might be
an index that could have provided pre-sorted input and allowed the
transition functions to be called as the rows come in, rather than having
to store them in a tuplestore in order to sort them once all the tuples
for the group have arrived.
Here we change the planner so it requests a path with a sort order which
supports the most amount of ORDER BY / DISTINCT aggregate functions and
add new code to the executor to allow it to support the processing of
ORDER BY / DISTINCT aggregates where the tuples are already sorted in the
correct order.
Since there can be many ORDER BY / DISTINCT aggregates in any given query
level, it's very possible that we can't find an order that suits all of
these aggregates. The sort order that the planner chooses is simply the
one that suits the most aggregate functions. We take the most strictly
sorted variation of each order and see how many aggregate functions can
use that, then we try again with the order of the remaining aggregates to
see if another order would suit more aggregate functions. For example:
SELECT agg(a ORDER BY a),agg2(a ORDER BY a,b) ...
would request the sort order to be {a, b} because {a} is a subset of the
sort order of {a,b}, but;
SELECT agg(a ORDER BY a),agg2(a ORDER BY c) ...
would just pick a plan ordered by {a} (we give precedence to aggregates
which are earlier in the targetlist).
SELECT agg(a ORDER BY a),agg2(a ORDER BY b),agg3(a ORDER BY b) ...
would choose to order by {b} since two aggregates suit that vs just one
that requires input ordered by {a}.
Author: David Rowley
Reviewed-by: Ronan Dunklau, James Coleman, Ranier Vilela, Richard Guo, Tom Lane
Discussion: https://postgr.es/m/CAApHDvpHzfo92%3DR4W0%2BxVua3BUYCKMckWAmo-2t_KiXN-wYH%3Dw%40mail.gmail.com
We can't check the output of this view very closely without
creating portability headaches, but we can make sure that
the number of rows is as-expected. In any case, this is
sufficient to exercise all the C code within, which is a
lot better than the 0% coverage we had before.
DongWook Lee
Discussion: https://postgr.es/m/CAAcByaLCHGJB7qAENEcx9D09UL=w4ma+yijwF_-1MSqQZ9wK6Q@mail.gmail.com
In commit 7c34555f8, I overlooked the need to configure SSPI
on Windows to allow login as the non-superuser role.
Fix that by adding auth_extra/--create-role incantation
(which, oddly enough, doesn't actually create the role).
Per buildfarm.
While here, upgrade the mechanism for temporarily setting
$ENV{PGUSER}, as per recommendation from ilmari.
Discussion: https://postgr.es/m/87edy7j1zz.fsf@wibble.ilmari.org
After commit 089480c07, it's necessary for background worker entry
points to be marked PGDLLEXPORT, else they aren't findable by
LookupBackgroundWorkerFunction(). Since pg_prewarm lacks any
regression tests, it's not surprising its worker entry points were
overlooked. (A quick search turned up no other such oversights.)
I added some documentation pointing out the need for this, too.
Robins Tharakan and Tom Lane
CAEP4nAzndnQv3-1QKb=D-hLoK3Rko12HHMFHHtdj2GQAUXO3gw@mail.gmail.com
We weren't exercising the session_preload_libraries option in any
meaningful way. auto_explain is a good testbed for doing so, since
it's one of the primary use-cases for session_preload_libraries.
Hence, adjust its TAP test to load the library via
session_preload_libraries not shared_preload_libraries. While at it,
feed test-specific settings to the backend via PGOPTIONS rather than
tediously rewriting postgresql.conf.
Also, since auto_explain has some PGC_SUSET parameters, we can use it
to provide a test case for the permissions-checking bug just fixed
by commit b35617de3.
Back-patch to v15 so that we have coverage for the permissions issue
in that branch too. To do that, I back-patched the refactoring
recently done by commit 550bc0a6c.
Dagfinn Ilmari Mannsåker and Tom Lane
Discussion: https://postgr.es/m/CABwTF4VEpwTHhRQ+q5MiC5ucngN-whN-PdcKeufX7eLSoAfbZA@mail.gmail.com
When postgres_fdw begins an asynchronous data fetch, it submits FETCH query
by using PQsendQuery(). If PQsendQuery() fails and returns 0, postgres_fdw
should report an error. But, previously, postgres_fdw reported an error
only when the return value is less than 0, though PQsendQuery() never return
the values other than 0 and 1. Therefore postgres_fdw could not handle
the failure to send FETCH query in an asynchronous data fetch.
This commit fixes postgres_fdw so that it reports an error
when PQsendQuery() returns 0.
Back-patch to v14 where asynchronous execution was supported in postgres_fdw.
Author: Fujii Masao
Reviewed-by: Japin Li, Tom Lane
Discussion: https://postgr.es/m/b187a7cf-d4e3-5a32-4d01-8383677797f3@oss.nttdata.com
This patch adds a new SUBSCRIPTION parameter "origin". It specifies
whether the subscription will request the publisher to only send changes
that don't have an origin or send changes regardless of origin. Setting it
to "none" means that the subscription will request the publisher to only
send changes that have no origin associated. Setting it to "any" means
that the publisher sends changes regardless of their origin. The default
is "any".
Usage:
CREATE SUBSCRIPTION sub1 CONNECTION 'dbname=postgres port=9999'
PUBLICATION pub1 WITH (origin = none);
This can be used to avoid loops (infinite replication of the same data)
among replication nodes.
This feature allows filtering only the replication data originating from
WAL but for initial sync (initial copy of table data) we don't have such a
facility as we can only distinguish the data based on origin from WAL. As
a follow-up patch, we are planning to forbid the initial sync if the
origin is specified as none and we notice that the publication tables were
also replicated from other publishers to avoid duplicate data or loops.
We forbid to allow creating origin with names 'none' and 'any' to avoid
confusion with the same name options.
Author: Vignesh C, Amit Kapila
Reviewed-By: Peter Smith, Amit Kapila, Dilip Kumar, Shi yu, Ashutosh Bapat, Hayato Kuroda
Discussion: https://postgr.es/m/CALDaNm0gwjY_4HFxvvty01BOT01q_fJLKQ3pWP9=9orqubhjcQ@mail.gmail.com
Detail and hint messages should be full sentences and should end with a
period, but some of the messages newly-introduced in v15 did not follow
that.
Author: Justin Pryzby
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/20220719120948.GF12702@telsasoft.com
Backpatch-through: 15
file_fdw doesn't support INSERT, UPDATE, DELETE and TRUNCATE.
It has the regression test that confirms that INSERT, UPDATE and DELETE
fail on its foreign table, but not TRUNCATE yet. It's better to
also test TRUNCATE fails on a foreign table not allowing TRUNCATE,
for test coverage. This commit adds that regression test using file_fdw.
Author: Yugo Nagata
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/20220630104812.ec1556481452c019874f4ac9@sraoss.co.jp
Tom Lane