Commit 3f50b8263 had an oversight: formerly, to deparse expressions
attached to a plan node, it was only necessary to update the
deparse_namespace ancestors list alongside calling set_deparse_plan.
Now it's necessary to update the ancestors list *first*, because
set_deparse_plan consults it, and one call site got that wrong.
This error was masked in most cases because explain.c uses just one
List object for the ancestors list, updating it in-place as the plan
is scanned, so that we accidentally had the right List assigned to
dpns->ancestors before it was needed. It would fail only if a
WorkTableScan node were the first one that we tried to deparse a
subexpression of.
Per report from Markus Winand. Like the previous patch,
back-patch to v14.
Discussion: https://postgr.es/m/648B0505-AA57-42C2-A2DA-E551DE46FA15@winand.at
This fixes a loss of precision that occurs when the first input is
very close to 1, so that its logarithm is very small.
Formerly, during the initial low-precision calculation to estimate the
result weight, the logarithm was computed to a local rscale that was
capped to NUMERIC_MAX_DISPLAY_SCALE (1000). However, the base may be
as close as 1e-16383 to 1, hence its logarithm may be as small as
1e-16383, and so the local rscale needs to be allowed to exceed 16383,
otherwise all precision is lost, leading to a poor choice of rscale
for the full-precision calculation.
Fix this by removing the cap on the local rscale during the initial
low-precision calculation, as we already do in the full-precision
calculation. This doesn't change the fact that the initial calculation
is a low-precision approximation, computing the logarithm to around 8
significant digits, which is very fast, especially when the base is
very close to 1.
Patch by me, reviewed by Alvaro Herrera.
Discussion: https://postgr.es/m/CAEZATCV-Ceu%2BHpRMf416yUe4KKFv%3DtdgXQAe5-7S9tD%3D5E-T1g%40mail.gmail.com
get_variable_range() would incautiously believe that statistics
containing only an MCV list are sufficient to derive a range estimate.
That's okay for an enum-like column that contains only MCVs, but
otherwise the estimate could be pretty bad. Make it report that the
range is indeterminate unless the MCVs plus nullfrac account for
the whole table.
I don't think this needs a dedicated test case, since a quick code
coverage check verifies that the existing regression tests traverse
all the alternatives. There is room to doubt that a future-proof
test case could be built anyway, given that the submitted example
accidentally doesn't fail before v11.
Per bug #17207 from Simon Perepelitsa. Back-patch to v10.
In principle this has been broken all along, but I'm hesitant to
make such changes in 9.6, since if anyone is unhappy with 9.6.24's
behavior there will be no second chance to fix it.
Discussion: https://postgr.es/m/17207-5265aefa79e333b4@postgresql.org
Commit 84f5c2908 forgot to consider the possibility that
EnsurePortalSnapshotExists could run inside a subtransaction with
lifespan shorter than the Portal's. In that case, the new active
snapshot would be popped at the end of the subtransaction, leaving
a dangling pointer in the Portal, with mayhem ensuing.
To fix, make sure the ActiveSnapshot stack entry is marked with
the same subtransaction nesting level as the associated Portal.
It's certainly safe to do so since we won't be here at all unless
the stack is empty; hence we can't create an out-of-order stack.
Let's also apply this logic in the case where PortalRunUtility
sets portalSnapshot, just to be sure that path can't cause similar
problems. It's slightly less clear that that path can't create
an out-of-order stack, so add an assertion guarding it.
Report and patch by Bertrand Drouvot (with kibitzing by me).
Back-patch to v11, like the previous commit.
Discussion: https://postgr.es/m/ff82b8c5-77f4-3fe7-6028-fcf3303e82dd@amazon.com
The code inconsistently used "statistic object" or "statistics" where
the correct term, as discussed, is actually "statistics object". This
improves the state of the code to be more consistent.
While on it, fix an incorrect error message introduced in a4d75c8. This
error should never happen, as the code states, but it would be
misleading.
Author: Justin Pryzby
Reviewed-by: Álvaro Herrera, Michael Paquier
Discussion: https://postgr.es/m/20210924215827.GS831@telsasoft.com
Backpatch-through: 14
The rewriter transformation for SEARCH BREADTH FIRST produces a
FieldSelect on a Var of type RECORD, where the Var references the
recursive union's worktable output. EXPLAIN VERBOSE failed to handle
this case, because it only expected such Vars to appear in CteScans
not WorkTableScans. Fix that, and add some test cases exercising
EXPLAIN on SEARCH and CYCLE queries.
In principle this oversight is an old bug, but it seems that the
case is unreachable without SEARCH BREADTH FIRST, because the
parser fails when attempting to create such a reference manually.
So for today I'll just patch HEAD/v14. Someday we might find that
the code portion of this patch needs to be back-patched further.
Per report from Atsushi Torikoshi.
Discussion: https://postgr.es/m/5bafa66ad529e11860339565c9e7c166@oss.nttdata.com
Session statistics, as introduced by 960869da08, had several shortcomings:
- an additional GetCurrentTimestamp() call that also impaired the accuracy of
the data collected
This can be avoided by passing the current timestamp we already have in
pgstat_report_stat().
- an additional statistics UDP packet sent every 500ms
This is solved by adding the new statistics to PgStat_MsgTabstat.
This is conceptually ugly, because session statistics are not
table statistics. But the struct already contains data unrelated
to tables, so there is not much damage done.
Connection and disconnection are reported in separate messages, which
reduces the number of additional messages to two messages per session and a
slight increase in PgStat_MsgTabstat size (but the same number of table
stats fit).
- Session time computation could overflow on systems where long is 32 bit.
Reported-By: Andres Freund <andres@anarazel.de>
Author: Andres Freund <andres@anarazel.de>
Author: Laurenz Albe <laurenz.albe@cybertec.at>
Discussion: https://postgr.es/m/20210801205501.nyxzxoelqoo4x2qc%40alap3.anarazel.de
Backpatch: 14-, where the feature was introduced.
Commit 054adca641ac1279dc8d9b74fda41948ac35e9a9 neglected to
initialize the type_id field of the synthesized type cache entry, so
it would make a new one on every call.
Also, better use the per-function memory context for this; otherwise
it leaks memory.
Discussion: https://www.postgresql.org/message-id/flat/17158-8a2ba823982537a4%40postgresql.org
Commit 01e658fa74 added hash support for row types. This also added
support for hashing anonymous record types, using the same approach
that the type cache uses for comparison support for record types: It
just reports that it works, but it might fail at run time if a
component type doesn't actually support the operation. We get away
with that for comparison because most types support that. But some
types don't support hashing, so the current state can result in
failures at run time where the planner chooses hashing over sorting,
whereas that previously worked if only sorting was an option.
We do, however, want the record hashing support for path tracking in
recursive unions, and the SEARCH and CYCLE clauses built on that. In
that case, hashing is the only plan option. So enable that, this
commit implements the following approach: The type cache does not
report that hashing is available for the record type. This undoes
that part of 01e658fa74. Instead, callers that require hashing no
matter what can override that result themselves. This patch only
touches the callers to make the aforementioned recursive query cases
work, namely the parse analysis of unions, as well as the hash_array()
function.
Reported-by: Sait Talha Nisanci <sait.nisanci@microsoft.com>
Bug: #17158
Discussion: https://www.postgresql.org/message-id/flat/17158-8a2ba823982537a4%40postgresql.org
timetz_zone() delivered completely wrong answers if the zone was
specified by a dynamic TZ abbreviation, because it failed to account
for the difference between the POSIX conventions for field values in
struct pg_tm and the conventions used in PG-specific datetime code.
As a stopgap fix, just adjust the tm_year and tm_mon fields to match
PG conventions. This is fixed in a different way in HEAD (388e71af8)
but I don't want to back-patch the change of reference point.
Discussion: https://postgr.es/m/CAJ7c6TOMG8zSNEZtCn5SPe+cCk3Lfxb71ZaQwT2F4T7PJ_t=KA@mail.gmail.com
The code printing expressions for extended statistics doubled the
parens, producing results like ((a+1)), which is unnecessary and not
consistent with how we print expressions elsewhere.
Fixed by tweaking the code to produce just a single set of parens.
Reported by Mark Dilger, fix by me. Backpatch to 14, where support for
extended statistics on expressions was added.
Reported-by: Mark Dilger
Discussion: https://postgr.es/m/20210122040101.GF27167%40telsasoft.com
When starting to use a query parsetree loaded from the catalogs,
we must begin by applying AcquireRewriteLocks(), to obtain the same
relation locks that the parser would have gotten if the query were
entered interactively, and to do some other cleanup such as dealing
with later-dropped columns. New-style SQL functions are just as
subject to this rule as other stored parsetrees; however, of the
places dealing with such functions, only init_sql_fcache had gotten
the memo. In particular, if we successfully inlined a new-style
set-returning SQL function that contained any relation references,
we'd either get an assertion failure or attempt to use those
relation(s) sans locks.
I also added AcquireRewriteLocks calls to fmgr_sql_validator and
print_function_sqlbody. Desultory experiments didn't demonstrate any
failures in those, but I suspect that I just didn't try hard enough.
Certainly we don't expect nearby code paths to operate without locks.
On the same logic of it-ought-to-have-the-same-effects-as-the-old-code,
call pg_rewrite_query() in fmgr_sql_validator, too. It's possible
that neither code path there needs to bother with rewriting, but
doing the analysis to prove that is beyond my goals for today.
Per bug #17161 from Alexander Lakhin.
Discussion: https://postgr.es/m/17161-048a1cdff8422800@postgresql.org
The distance in phrase operator must be an integer value between zero
and MAXENTRYPOS inclusive. But previously the error message about
its valid value included the information about its upper limit
but not lower limit (i.e., zero). This commit improves the error message
so that it also includes the information about its lower limit.
Back-patch to v9.6 where full-text phrase search was supported.
Author: Kyotaro Horiguchi
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/20210819.170315.1413060634876301811.horikyota.ntt@gmail.com
Previously log messages late during shutdown could end up using either another
backend's PgBackendStatus (multi user) or segfault (single user) because
pgstat_get_my_query_id()'s check for !MyBEEntry didn't filter out use after
pgstat_beshutdown_hook().
This became a bug in 4f0b0966c86, but was a bit fishy before. But given
there's no known problematic cases before 14, it doesn't seem worth
backpatching further.
Also fixes a wrong filename in a comment, introduced in e1025044.
Reported-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://postgr.es/m/Julien Rouhaud <rjuju123@gmail.com>
Backpatch: 14-
This is a combined revert of the following commits:
- c3826f8, a refactoring piece that moved the hex decoding code to
src/common/. This code was cleaned up by aef8948, as it originally
included no overflow checks in the same way as the base64 routines in
src/common/ used by SCRAM, making it unsafe for its purpose.
- aef8948, a more advanced refactoring of the hex encoding/decoding code
to src/common/ that added sanity checks on the result buffer for hex
decoding and encoding. As reported by Hans Buschmann, those overflow
checks are expensive, and it is possible to see a performance drop in
the decoding/encoding of bytea or LOs the longer they are. Simple SQLs
working on large bytea values show a clear difference in perf profile.
- ccf4e27, a cleanup made possible by aef8948.
The reverts of all those commits bring back the performance of hex
decoding and encoding back to what it was in ~13. Fow now and
post-beta3, this is the simplest option.
Reported-by: Hans Buschmann
Discussion: https://postgr.es/m/1629039545467.80333@nidsa.net
Backpatch-through: 14
Formerly, the numeric code tested whether an integer value of a larger
type would fit in a smaller type by casting it to the smaller type and
then testing if the reverse conversion produced the original value.
That's perfectly fine, except that it caused a test failure on
buildfarm animal castoroides, most likely due to a compiler bug.
Instead, do these tests by comparing against PG_INT16/32_MIN/MAX. That
matches existing code in other places, such as int84(), which is more
widely tested, and so is less likely to go wrong.
While at it, add regression tests covering the numeric-to-int8/4/2
conversions, and adjust the recently added tests to the style of
434ddfb79a (on the v11 branch) to make failures easier to diagnose.
Per buildfarm via Tom Lane, reviewed by Tom Lane.
Discussion: https://postgr.es/m/2394813.1628179479%40sss.pgh.pa.us
This fixes a long-standing bug when using to_char() to format a
numeric value in scientific notation -- if the value's exponent is
less than -NUMERIC_MAX_DISPLAY_SCALE-1 (-1001), it produced a
division-by-zero error.
The reason for this error was that get_str_from_var_sci() divides its
input by 10^exp, which it produced using power_var_int(). However, the
underflow test in power_var_int() causes it to return zero if the
result scale is too small. That's not a problem for power_var_int()'s
only other caller, power_var(), since that limits the rscale to 1000,
but in get_str_from_var_sci() the exponent can be much smaller,
requiring a much larger rscale. Fix by introducing a new function to
compute 10^exp directly, with no rscale limit. This also allows 10^exp
to be computed more efficiently, without any numeric multiplication,
division or rounding.
Discussion: https://postgr.es/m/CAEZATCWhojfH4whaqgUKBe8D5jNHB8ytzemL-PnRx+KCTyMXmg@mail.gmail.com
This fixes a couple of related problems that arise when raising
numbers to very large powers.
Firstly, when raising a negative number to a very large integer power,
the result should be well-defined, but the previous code would only
cope if the exponent was small enough to go through power_var_int().
Otherwise it would throw an internal error, attempting to take the
logarithm of a negative number. Fix this by adding suitable handling
to the general case in power_var() to cope with negative bases,
checking for integer powers there.
Next, when raising a (positive or negative) number whose absolute
value is slightly less than 1 to a very large power, the result should
approach zero as the power is increased. However, in some cases, for
sufficiently large powers, this would lose all precision and return 1
instead of 0. This was due to the way that the local_rscale was being
calculated for the final full-precision calculation:
local_rscale = rscale + (int) val - ln_dweight + 8
The first two terms on the right hand side are meant to give the
number of significant digits required in the result ("val" being the
estimated result weight). However, this failed to account for the fact
that rscale is clipped to a maximum of NUMERIC_MAX_DISPLAY_SCALE
(1000), and the result weight might be less then -1000, causing their
sum to be negative, leading to a loss of precision. Fix this by
forcing the number of significant digits calculated to be nonnegative.
It's OK for it to be zero (when the result weight is less than -1000),
since the local_rscale value then includes a few extra digits to
ensure an accurate result.
Finally, add additional underflow checks to exp_var() and power_var(),
so that they consistently return zero for cases like this where the
result is indistinguishable from zero. Some paths through this code
already returned zero in such cases, but others were throwing overflow
errors.
Dean Rasheed, reviewed by Yugo Nagata.
Discussion: http://postgr.es/m/CAEZATCW6Dvq7+3wN3tt5jLj-FyOcUgT5xNoOqce5=6Su0bCR0w@mail.gmail.com
This changes the behavior of examining the pg_file_settings view after
changing a config option that requires restart. The user needs to know
that any change of such options does not take effect until a restart,
and this worked correctly if the line is edited without removing it.
However, for the case where the line is removed altogether, the flag
doesn't get set, because a flag was only set in set_config_option, but
that's not called for lines removed. Repair.
(Ref.: commits 62d16c7fc561 and a486e35706ea)
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/202107262302.xsfdfc5sb7sh@alvherre.pgsql
The error messages using the word "non-negative" are confusing
because it's ambiguous about whether it accepts zero or not.
This commit improves those error messages by replacing it with
less ambiguous word like "greater than zero" or
"greater than or equal to zero".
Also this commit added the note about the word "non-negative" to
the error message style guide, to help writing the new error messages.
When postgres_fdw option fetch_size was set to zero, previously
the error message "fetch_size requires a non-negative integer value"
was reported. This error message was outright buggy. Therefore
back-patch to all supported versions where such buggy error message
could be thrown.
Reported-by: Hou Zhijie
Author: Bharath Rupireddy
Reviewed-by: Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/OS0PR01MB5716415335A06B489F1B3A8194569@OS0PR01MB5716.jpnprd01.prod.outlook.com
In postgresql.conf, memory and file size GUCs can be specified with "B"
(bytes) as of b06d8e58b. Likewise, time GUCs can be specified with "us"
(microseconds) as of caf626b2c. Update postgres.conf.sample to reflect
that fact.
Pavel Luzanov
Backpatch to v12, which is the earliest version that allows both of
these units. A separate commit will document the "B" case for v11.
Discussion: https://www.postgresql.org/message-id/flat/f10d16fc-8fa0-1b3c-7371-cb3a35a13b7a%40postgrespro.ru
It has been spotted that multiranges lack of ability to decompose them into
individual ranges. Subscription and proper expanded object representation
require substantial work, and it's too late for v14. This commit
provides the implementation of unnest(multirange), which is quite trivial.
unnest(multirange) is defined as a polymorphic procedure.
Catversion is bumped.
Reported-by: Jonathan S. Katz
Discussion: https://postgr.es/m/flat/60258efe-bd7e-4886-82e1-196e0cac5433%40postgresql.org
Author: Alexander Korotkov
Reviewed-by: Justin Pryzby, Jonathan S. Katz, Zhihong Yu, Tom Lane
Reviewed-by: Alvaro Herrera
"Result Cache" was never a great name for this node, but nobody managed
to come up with another name that anyone liked enough. That was until
David Johnston mentioned "Node Memoization", which Tom Lane revised to
just "Memoize". People seem to like "Memoize", so let's do the rename.
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/20210708165145.GG1176@momjian.us
Backpatch-through: 14, where Result Cache was introduced
The name introduced by commit 4656e3d66 was agreed to be unreasonably
long. To match this change, rename initdb's recently-added
--clobber-cache option to --discard-caches.
Discussion: https://postgr.es/m/1374320.1625430433@sss.pgh.pa.us
41469253e went to the trouble of removing a theoretical bug from
free_sort_tuple by checking if the tuple was NULL before freeing it. Let's
make this a little more robust by also setting the tuple to NULL so that
should we be called again we won't end up doing a pfree on the already
pfree'd tuple. Per advice from Tom Lane.
Discussion: https://postgr.es/m/3188192.1626136953@sss.pgh.pa.us
Backpatch-through: 9.6, same as 41469253e
This fixes a theoretical bug in tuplesort.c which, if a bounded sort was
used in combination with a byval Datum sort (tuplesort_begin_datum), when
switching the sort to a bounded heap in make_bounded_heap(), we'd call
free_sort_tuple(). The problem was that when sorting Datums of a byval
type, the tuple is NULL and free_sort_tuple() would free the memory for it
regardless of that. This would result in a crash.
Here we fix that simply by adding a check to see if the tuple is NULL
before trying to disassociate and free any memory belonging to it.
The reason this bug is only theoretical is that nowhere in the current
code base do we do tuplesort_set_bound() when performing a Datum sort.
However, let's backpatch a fix for this as if any extension uses the code
in this way then it's likely to cause problems.
Author: Ronan Dunklau
Discussion: https://postgr.es/m/CAApHDvpdoqNC5FjDb3KUTSMs5dg6f+XxH4Bg_dVcLi8UYAG3EQ@mail.gmail.com
Backpatch-through: 9.6, oldest supported version
If an error occurred in the wrong place, it was possible to leave an
unintialized entry in the hash table, leading to a crash. Fixed.
Also, be more careful about the order of operations so that an
allocation error doesn't leak memory in CacheMemoryContext or
unnecessarily advance NextRecordTypmod.
Backpatch through version 11. Earlier versions (prior to 35ea75632a5)
do not exhibit the problem, because an uninitialized hash entry
contains a valid empty list.
Author: Sait Talha Nisanci <Sait.Nisanci@microsoft.com>
Reviewed-by: Andres Freund
Discussion: https://postgr.es/m/HE1PR8303MB009069D476225B9A9E194B8891779@HE1PR8303MB0090.EURPRD83.prod.outlook.com
Backpatch-through: 11
This fixes an overflow error when using the numeric * operator if the
result has more than 16383 digits after the decimal point by rounding
the result. Overflow errors should only occur if the result has too
many digits *before* the decimal point.
Discussion: https://postgr.es/m/CAEZATCUmeFWCrq2dNzZpRj5+6LfN85jYiDoqm+ucSXhb9U2TbA@mail.gmail.com
Due to how pg_size_pretty(bigint) was implemented, it's possible that when
given a negative number of bytes that the returning value would not match
the equivalent positive return value when given the equivalent positive
number of bytes. This was due to two separate issues.
1. The function used bit shifting to convert the number of bytes into
larger units. The rounding performed by bit shifting is not the same as
dividing. For example -3 >> 1 = -2, but -3 / 2 = -1. These two
operations are only equivalent with positive numbers.
2. The half_rounded() macro rounded towards positive infinity. This meant
that negative numbers rounded towards zero and positive numbers rounded
away from zero.
Here we fix#1 by dividing the values instead of bit shifting. We fix#2
by adjusting the half_rounded macro always to round away from zero.
Additionally, adjust the pg_size_pretty(numeric) function to be more
explicit that it's using division rather than bit shifting. A casual
observer might have believed bit shifting was used due to a static
function being named numeric_shift_right. However, that function was
calculating the divisor from the number of bits and performed division.
Here we make that more clear. This change is just cosmetic and does not
affect the return value of the numeric version of the function.
Here we also add a set of regression tests both versions of
pg_size_pretty() which test the values directly before and after the
function switches to the next unit.
This bug was introduced in 8a1fab36a. Prior to that negative values were
always displayed in bytes.
Author: Dean Rasheed, David Rowley
Discussion: https://postgr.es/m/CAEZATCXnNW4HsmZnxhfezR5FuiGgp+mkY4AzcL5eRGO4fuadWg@mail.gmail.com
Backpatch-through: 9.6, where the bug was introduced.
Commit 03ffc4d6d added logic to bypass all caching behavior in
LookupOpclassInfo when CLOBBER_CACHE_ALWAYS is enabled. It doesn't
look like I stopped to think much about what that would cost, but
recent investigation shows that the cost is enormous: it roughly
doubles the time needed for cache-clobber test runs.
There does seem to be value in this behavior when trying to test
the opclass-cache loading logic itself, but for other purposes the
cost is excessive. Hence, let's back off to doing this only when
debug_invalidate_system_caches_always is at least 3; or in older
branches, when CLOBBER_CACHE_RECURSIVELY is defined.
While here, clean up some other minor issues in LookupOpclassInfo.
Re-order the code so we aren't left with broken cache entries (leading
to later core dumps) in the unlikely case that we suffer OOM while
trying to allocate space for a new entry. (That seems to be my
oversight in 03ffc4d6d.) Also, in >= v13, stop allocating one array
entry too many. That's evidently left over from sloppy reversion in
851b14b0c.
Back-patch to all supported branches, mainly to reduce the runtime
of cache-clobbering buildfarm animals.
Discussion: https://postgr.es/m/1370856.1625428625@sss.pgh.pa.us
* Fix enumeration of the multirange operators in calc_multirangesel() and
calc_multirangesel() switches.
* Add more regression tests for matching to empty ranges/multiranges.
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/c5269c65-f967-77c5-ff7c-15e621c47f6a%40gmail.com
Author: Alexander Korotkov
Backpatch-through: 14, where multiranges were introduced
We were using RelationGetIndexList() to update the relation's replica
identity index but instead, we can directly use RelationGetReplicaIndex()
which uses the same functionality. This is a minor code readability
improvement.
Author: Japin Li
Reviewed-By: Takamichi Osumi, Amit Kapila
Discussion: https://postgr.es/m/4C99A862-69C8-431F-960A-81B1151F1B89@enterprisedb.com
The setting has no effect except during startup. It's still nice to be
able to change it dynamically, which is expected to be pretty useful to
an admin following crash recovery when restarting the cluster is not so
appealing.
Per discussions following commits 2941138e6 and 61752afb2.
Author: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20210529192321.GM2082%40telsasoft.com
The main goal of this option is to allow inspecting temporary files for
debugging purposes, so moving the parameter there is natural.
Oversight in cd91de0.
Reported-by: Justin Pryzby
Author: Euler Taveira
Discussion: https://postgr.es/m/20210612004347.GP16435@telsasoft.com
Contrary to the comment here, POSIX does not guarantee atomicity of a
read(), if another process calls write() concurrently. Or at least Linux
does not. Add locking to load_relmap_file() to avoid the race condition.
Fixes bug #17064. Thanks to Alexander Lakhin for the report and test case.
Backpatch-through: 9.6, all supported versions.
Discussion: https://www.postgresql.org/message-id/17064-bb0d7904ef72add3@postgresql.org
It has been spotted that multiranges lack of ability to decompose them into
individual ranges. Subscription and proper expanded object representation
require substantial work, and it's too late for v14. This commit
provides the implementation of unnest(multirange) and cast multirange as
an array of ranges, which is quite trivial.
unnest(multirange) is defined as a polymorphic procedure. The catalog
description of the cast underlying procedure is duplicated for each multirange
type because we don't have anyrangearray polymorphic type to use here.
Catversion is bumped.
Reported-by: Jonathan S. Katz
Discussion: https://postgr.es/m/flat/60258efe-bd7e-4886-82e1-196e0cac5433%40postgresql.org
Author: Alexander Korotkov
Reviewed-by: Justin Pryzby, Jonathan S. Katz, Zhihong Yu
Previously, a zero value for the relfilenode resulted in
a confusing error message about "unexpected duplicate".
This function returns NULL for other invalid relfilenode
values, so zero should be treated likewise.
It's been like this all along, so back-patch to all supported
branches.
Justin Pryzby
Discussion: https://postgr.es/m/20210612023324.GT16435@telsasoft.com
