Commits fdd965d07 and 3cd9c3b92 tested CREATE INDEX CONCURRENTLY by
launching two separate pgbench runs concurrently. This was needed so
that only a single client thread would run CREATE INDEX CONCURRENTLY,
avoiding deadlock between two CICs. However, there's a better way,
which is to use an advisory lock to prevent concurrent CICs. That's
better in part because the test code is shorter and more readable, but
mostly because it automatically scales things to launch an appropriate
number of CICs relative to the number of INSERT transactions.
As committed, typically half to three-quarters of the CIC transactions
were pointless because the INSERT transactions had already stopped.
In passing, remove background_pgbench, which was added to support
these tests and isn't needed anymore. We can always put it back
if we find a use for it later.
Back-patch to v12; older pgbench versions lack the
conditional-execution features needed for this method.
Tom Lane and Andrey Borodin
Discussion: https://postgr.es/m/139687.1635277318@sss.pgh.pa.us
The purpose of commit 8a54e12a38d1545d249f1402f66c8cde2837d97c was to
fix this, and it sufficed when the PREPARE TRANSACTION completed before
the CIC looked for lock conflicts. Otherwise, things still broke. As
before, in a cluster having used CIC while having enabled prepared
transactions, queries that use the resulting index can silently fail to
find rows. It may be necessary to reindex to recover from past
occurrences; REINDEX CONCURRENTLY suffices. Fix this for future index
builds by making CIC wait for arbitrarily-recent prepared transactions
and for ordinary transactions that may yet PREPARE TRANSACTION. As part
of that, have PREPARE TRANSACTION transfer locks to its dummy PGPROC
before it calls ProcArrayClearTransaction(). Back-patch to 9.6 (all
supported versions).
Andrey Borodin, reviewed (in earlier versions) by Andres Freund.
Discussion: https://postgr.es/m/01824242-AA92-4FE9-9BA7-AEBAFFEA3D0C@yandex-team.ru
CIC and REINDEX CONCURRENTLY assume backends see their catalog changes
no later than each backend's next transaction start. That failed to
hold when a backend absorbed a relevant invalidation in the middle of
running RelationBuildDesc() on the CIC index. Queries that use the
resulting index can silently fail to find rows. Fix this for future
index builds by making RelationBuildDesc() loop until it finishes
without accepting a relevant invalidation. It may be necessary to
reindex to recover from past occurrences; REINDEX CONCURRENTLY suffices.
Back-patch to 9.6 (all supported versions).
Noah Misch and Andrey Borodin, reviewed (in earlier versions) by Andres
Freund.
Discussion: https://postgr.es/m/20210730022548.GA1940096@gust.leadboat.com
Several TAP tests use poll_query_until() to wait for the postmaster
to restart. They were checking to see if a trivial query
(e.g. "SELECT 1") succeeds. However, that's problematic in the wake
of commit 11e9caff8, because now that we feed said query to psql
via stdin, we risk IPC::Run whining about a SIGPIPE failure if psql
quits before reading the query. Hence, we can't use a nonempty
query in cases where we need to wait for connection failures to
stop happening.
Per the precedent of commits c757a3da0 and 6d41dd045, we can pass
"undef" as the query in such cases to ensure that IPC::Run has
nothing to write. However, then we have to say that the expected
output is empty, and this exposes a deficiency in poll_query_until:
if psql fails altogether and returns empty stdout, poll_query_until
will treat that as a success! That's because, contrary to its
documentation, it makes no actual check for psql failure, looking
neither at the exit status nor at stderr.
To fix that, adjust poll_query_until to insist on empty stderr as
well as a stdout match. (I experimented with checking exit status
instead, but it seems that psql often does exit(1) in cases that we
need to consider successes. That might be something to fix someday,
but it would be a non-back-patchable behavior change.)
Back-patch to v10. The test cases needing this exist only as far
back as v11, but it seems wise to keep poll_query_until's behavior
the same in v10, in case we back-patch another such test case in
future. (9.6 does not currently need this change, because in that
branch poll_query_until can't be told to accept empty stdout as
a success case.)
Per assorted buildfarm failures, mostly on hoverfly.
Discussion: https://postgr.es/m/CAA4eK1+zM6L4QSA1XMvXY_qqWwdUmqkOS1+hWvL8QcYEBGA1Uw@mail.gmail.com
Partial back-port of commit 081876d75ea15c3bd2ee5ba64a794fd8ea46d794.
A test case for a pending bug fix needs this capability, but the code
on 9.6 is significantly different, so I'm only back-patching this
change as far as v10. We'll have to work around the problem another
way in v9.6.
Discussion: http://postgr.es/m/CAFiTN-tcivNvL0Rg6rD7_CErNfE75H7+gh9WbMxjbgsattja1Q@mail.gmail.com
The Msys shell mangles certain patterns in its command line, so avoid
handing arbitrary SQL to psql on the command line and instead use
IPC::Run's redirection facility for stdin. This pattern is already
mostly whats used, but query_poll_until() was not doing the right thing.
Problem discovered on the buildfarm when a new TAP test failed on msys.
In order to avoid getting old logfile contents certain functions in
PostgresNode were doing one of two things. On Windows it rotated the
logfile and restarted the server, while elsewhere it truncated the log
file. Both of these are unnecessary. We borrow from the buildfarm which
does this instead: note the size of the logfile before we start, and
then when fetching the logfile skip to that position before accumulating
contents. This is spelled differently on Windows but the effect is the
same. This is largely centralized in TestLib's slurp_file function,
which has a new optional parameter, the offset to skip to before
starting to reading the file. Code in the client becomes much neater.
Backpatch to all live branches.
Michael Paquier, slightly modified by me.
Discussion: https://postgr.es/m/YHajnhcMAI3++pJL@paquier.xyz
Commit 151c0c5f7 neglected the possibility that a TEMP_CONFIG file
would explicitly set max_wal_senders=0; as indeed buildfarm member
thorntail does, so that it can test wal_level=minimal in other test
suites. Hence, rather than assuming that max_wal_senders=10 will
prevail if we say nothing, set it explicitly.
Set max_replication_slots=10 explicitly too, just to be safe.
Back-patch to v10, like the previous patch.
Discussion: https://postgr.es/m/723911.1601417626@sss.pgh.pa.us
PostgresNode.pm set "max_wal_senders = 5" for replication testing,
but this seems to be slightly too low for our current test suite.
Slower buildfarm members frequently report "number of requested standby
connections exceeds max_wal_senders" failures, due to old walsenders
not exiting instantaneously. Usually, the test does not fail overall
because of automatic walreceiver restart, but sometimes the failure
becomes visible; and in any case such retries slow down the test.
That value came in with commit 89ac7004d, but was soon obsoleted by
f6d6d2920, which raised the built-in default from zero to 10; so that
PostgresNode.pm is actually setting it to less than the conservative
built-in default. That seems pretty pointless, so let's remove the
special setting and let the default prevail, in hopes of making
the TAP tests more robust.
Likewise, the setting "max_replication_slots = 5" is obsolete and
can be removed.
While here, reverse-engineer a comment about why we're choosing
less-than-default values for some other settings.
(Note: before v12, max_wal_senders counted against max_connections
so that the latter setting also needs some fiddling with.)
Back-patch to v10 where the subscription tests were added.
It's likely that the older branches aren't pushing the boundaries
of max_wal_senders, but I'm disinclined to spend time trying to
figure out exactly when it started to be a problem.
Discussion: https://postgr.es/m/723911.1601417626@sss.pgh.pa.us
Back-patch commits 91bdf499b and ffb4cee43, so that all branches
agree on when and how to do Windows CRLF conversion.
This should close the referenced thread. Thanks to Andrew Dunstan
for discussion/review.
Discussion: https://postgr.es/m/412ae8da-76bb-640f-039a-f3513499e53d@gmx.net
In commit 850196b610d2 I (Álvaro) failed to handle the case of walsender
shutting down on an error before setting up its 'xlogreader' pointer;
the error handling code dereferences the pointer, causing a crash.
Fix by testing the pointer before trying to dereference it.
Kyotaro authored the code fix; I adopted Nathan's test case to be used
by the TAP tests and added the necessary PostgresNode change.
Reported-by: Nathan Bossart <bossartn@amazon.com>
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/C04FC24E-903D-4423-B312-6910E4D846E5@amazon.com
Includes some manual cleanup of places that pgindent messed up,
most of which weren't per project style anyway.
Notably, it seems some people didn't absorb the style rules of
commit c9d297751, because there were a bunch of new occurrences
of function calls with a newline just after the left paren, all
with faulty expectations about how the rest of the call would get
indented.
The test suites currently don't use Unix-domain sockets on Windows.
This optionally allows enabling that by setting the environment
variable PG_TEST_USE_UNIX_SOCKETS.
This should currently be considered experimental. In particular,
pg_regress.c contains some comments that the cleanup code for
Unix-domain sockets doesn't work correctly under Windows, which hasn't
been an problem until now. But it's good enough for locally
supervised testing of the functionality.
Reviewed-by: Andrew Dunstan <andrew.dunstan@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/54bde68c-d134-4eb8-5bd3-8af33b72a010@2ndquadrant.com
PostgresNode already retained base directories in such cases. Stop
using $SIG{__DIE__}, which is redundant with the exit status check, in
lieu of proliferating it to TestLib. Back-patch to 9.6, where commit
88802e068017bee8cea7a5502a712794e761c7b5 introduced retention on
failure.
Reviewed by Daniel Gustafsson.
Discussion: https://postgr.es/m/20200202170155.GA3264196@rfd.leadboat.com
Before, if a recovery target is configured, but the archive ended
before the target was reached, recovery would end and the server would
promote without further notice. That was deemed to be pretty wrong.
With this change, if the recovery target is not reached, it is a fatal
error.
Based-on-patch-by: Leif Gunnar Erlandsen <leif@lako.no>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/993736dd3f1713ec1f63fc3b653839f5@lako.no
Up to now, psql's tab-complete.c has had exactly no regression test
coverage. This patch is an experimental attempt to add some.
This needs Perl's IO::Pty module, which isn't installed everywhere,
so the test script just skips all tests if that's not present.
There may be other portability gotchas too, so I await buildfarm
results with interest.
So far this just covers a few very basic keyword-completion and
query-driven-completion scenarios, which should be enough to let us
get a feel for whether this is practical at all from a portability
standpoint. If it is, there's lots more that can be done.
Discussion: https://postgr.es/m/10967.1577562752@sss.pgh.pa.us
src/test/kerberos and src/test/ldap need to run a private authentication
server of the relevant type, for which they need a free TCP port.
They were just picking a random port number in 48K-64K, which works
except when something's already using the particular port. Notably,
the probability of failure rises dramatically if one simply runs those
tests in a tight loop, because each test cycle leaves behind a bunch of
high ports that are transiently in TIME_WAIT state.
To fix, split out the code that PostgresNode.pm already had for
identifying a free TCP port number, so that it can be invoked to choose
a port for the KDC or LDAP server. This isn't 100% bulletproof, since
conceivably something else on the machine could grab the port between
the time we check and the time we actually start the server. But that's
a pretty short window, so in practice this should be good enough.
Back-patch to v11 where these test suites were added.
Patch by me, reviewed by Andrew Dunstan.
Discussion: https://postgr.es/m/3397.1564872168@sss.pgh.pa.us
This fixes some TAP suites when using msys Perl and a builddir located
in an msys mount point other than "/". For example, builddir=/c/pg
exhibited the problem, since /c/pg falls in mount point "/c".
Back-patch to 9.6, where tests first started to perform such
translations. In back branches, offer both new and old APIs.
Reviewed by Andrew Dunstan.
Discussion: https://postgr.es/m/20190610045838.GA238501@rfd.leadboat.com
The buildfarm client uses TEMP_CONFIG to implement its extra_config
setting. Except for stats_temp_directory, extra_config now applies to
TAP suites; extra_config values seen in the past month are compatible
with this. Back-patch to 9.6, where PostgresNode was introduced, so the
buildfarm can rely on it sooner.
Reviewed by Andrew Dunstan and Tom Lane.
Discussion: https://postgr.es/m/20181229021950.GA3302966@rfd.leadboat.com
Commit c0985099, later adjusted by commit 4ab02e81, probed 0.0.0.0
in addition to 127.0.0.1, for the benefit of Windows build farm
animals. It isn't really useful on Unix systems, and turned out to
be a bit inconvenient to users of some corporate firewall software.
Switch back to probing just 127.0.0.1 on non-Windows systems.
Back-patch to 9.6, like the earlier changes.
Discussion: https://postgr.es/m/CA%2BhUKG%2B21EPwfgs4m%2BtqyRtbVqkOUvP8QQ8sWk9%2Bh55Aub1H3A%40mail.gmail.com
Commit c098509927f9a49ebceb301a2cb6a477ecd4ac3c changed
PostgresNode::get_new_node() to probe 0.0.0.0 instead of 127.0.0.1, but
the new test was less effective for Windows native Perl. This increased
the failure rate of buildfarm members bowerbird and jacana. Instead,
test 0.0.0.0 and concrete addresses. This restores the old level of
defense, but the algorithm is still subject to its longstanding time of
check to time of use race condition. Back-patch to 9.6, like the
previous change.
Discussion: https://postgr.es/m/GrdLgAdUK9FdyZg8VIcTDKVOkys122ZINEb3CjjoySfGj2KyPiMKTh1zqtRp0TAD7FJ27G-OBB3eplxIB5GhcQH5o8zzGZfp0MuJaXJxVxk=@yesql.se
Up to now the tests of pg_rewind have been using a superuser for all its
tests (which is the default of many tests actually, and something that
ought to be reviewed) when involving an online source server, still it
is possible to use a non-superuser role to do that as long as this role
is granted permissions to execute all the source-side functions used for
the rewind. This is possible since v11, and was already documented as
of bfc8068.
PostgresNode::init is extended so as callers of this routine can add
extra options to configure the authentication of a new node, which gets
used by this commit, and allows the tests to work properly on Windows
where SSPI is used.
This will allow to catch up easily any change in pg_rewind if the tool
begins to use more backend-side functions, so as the properties
introduced by v11 are kept.
Per suggestion from Peter Eisentraut.
Author: Michael Paquier
Reviewed-by: Magnus Hagander
Discussion: https://postgr.es/m/20190411041336.GM2728@paquier.xyz
postmaster startup scrutinizes any shared memory segment recorded in
postmaster.pid, exiting if that segment matches the current data
directory and has an attached process. When the postmaster.pid file was
missing, a starting postmaster used weaker checks. Change to use the
same checks in both scenarios. This increases the chance of a startup
failure, in lieu of data corruption, if the DBA does "kill -9 `head -n1
postmaster.pid` && rm postmaster.pid && pg_ctl -w start". A postmaster
will no longer stop if shmat() of an old segment fails with EACCES. A
postmaster will no longer recycle segments pertaining to other data
directories. That's good for production, but it's bad for integration
tests that crash a postmaster and immediately delete its data directory.
Such a test now leaks a segment indefinitely. No "make check-world"
test does that. win32_shmem.c already avoided all these problems. In
9.6 and later, enhance PostgresNode to facilitate testing. Back-patch
to 9.4 (all supported versions).
Reviewed (in earlier versions) by Daniel Gustafsson and Kyotaro HORIGUCHI.
Discussion: https://postgr.es/m/20190408064141.GA2016666@rfd.leadboat.com
This reverts commits 2f932f71d9f2963bbd201129d7b971c8f5f077fd,
16ee6eaf80a40007a138b60bb5661660058d0422 and
6f0e190056fe441f7cf788ff19b62b13c94f68f3. The buildfarm has revealed
several bugs. Back-patch like the original commits.
Discussion: https://postgr.es/m/20190404145319.GA1720877@rfd.leadboat.com
postmaster startup scrutinizes any shared memory segment recorded in
postmaster.pid, exiting if that segment matches the current data
directory and has an attached process. When the postmaster.pid file was
missing, a starting postmaster used weaker checks. Change to use the
same checks in both scenarios. This increases the chance of a startup
failure, in lieu of data corruption, if the DBA does "kill -9 `head -n1
postmaster.pid` && rm postmaster.pid && pg_ctl -w start". A postmaster
will no longer recycle segments pertaining to other data directories.
That's good for production, but it's bad for integration tests that
crash a postmaster and immediately delete its data directory. Such a
test now leaks a segment indefinitely. No "make check-world" test does
that. win32_shmem.c already avoided all these problems. In 9.6 and
later, enhance PostgresNode to facilitate testing. Back-patch to 9.4
(all supported versions).
Reviewed by Daniel Gustafsson and Kyotaro HORIGUCHI.
Discussion: https://postgr.es/m/20130911033341.GD225735@tornado.leadboat.com
When libpq is loaded in the server (for instance, by
libpqwalreceiver), it may use libpq environment variables set in the
postmaster environment for connection parameter defaults. This has
some confusing effects in our test suites. For example, the TAP test
infrastructure sets PGAPPNAME to allow identifying clients in the
server log. But this environment variable is also inherited by
temporary servers started with pg_ctl and is then in turn used by
libpqwalreceiver as the application_name for connecting to remote
servers where it then shows up in pg_stat_replication and is relevant
for things like synchronous_standby_names. Replication already has a
suitable default for application_name, and overriding that
accidentally then requires the individual test cases to re-override
that, which is all very confusing and unnecessary.
To fix, unset PGAPPNAME temporarily before running pg_ctl start or
restart in the tests.
More comprehensive approaches like unsetting all environment variables
in pg_ctl were considered but might be too complicated to achieve
portably.
The now unnecessary re-overriding of application_name by test cases is
also removed.
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://www.postgresql.org/message-id/flat/33383613-690e-6f1b-d5ba-4957ff40f6ce@2ndquadrant.com
recovery.conf settings are now set in postgresql.conf (or other GUC
sources). Currently, all the affected settings are PGC_POSTMASTER;
this could be refined in the future case by case.
Recovery is now initiated by a file recovery.signal. Standby mode is
initiated by a file standby.signal. The standby_mode setting is
gone. If a recovery.conf file is found, an error is issued.
The trigger_file setting has been renamed to promote_trigger_file as
part of the move.
The documentation chapter "Recovery Configuration" has been integrated
into "Server Configuration".
pg_basebackup -R now appends settings to postgresql.auto.conf and
creates a standby.signal file.
Author: Fujii Masao <masao.fujii@gmail.com>
Author: Simon Riggs <simon@2ndquadrant.com>
Author: Abhijit Menon-Sen <ams@2ndquadrant.com>
Author: Sergei Kornilov <sk@zsrv.org>
Discussion: https://www.postgresql.org/message-id/flat/607741529606767@web3g.yandex.ru/
Reporting only the stderr is unhelpful when the problem is that the
server output we're getting doesn't match what was expected. So we
should report the query output too; and just for good measure, let's
print the query we used and the output we expected.
Back-patch to 9.5 where poll_query_until was introduced.
Discussion: https://postgr.es/m/17913.1539634756@sss.pgh.pa.us
Currently there are two ways to trigger log rotation in logging collector
process: call pg_rotate_logfile() SQL-function or send SIGUSR1 signal directly
to logging collector process. However, it's nice to have more suitable way
for external tools to do that, which wouldn't require SQL connection or
knowledge of logging collector pid. This commit implements triggering log
rotation by "pg_ctl logrotate" command.
Discussion: https://postgr.es/m/20180416.115435.28153375.horiguchi.kyotaro%40lab.ntt.co.jp
Author: Kyotaro Horiguchi, Alexander Kuzmenkov, Alexander Korotkov
WAL senders sending logically-decoded data fail to properly report in
"streaming" state when starting up, hence as long as one extra record is
not replayed, such WAL senders would remain in a "catchup" state, which
is inconsistent with the physical cousin.
This can be easily reproduced by for example using pg_recvlogical and
restarting the upstream server. The TAP tests have been slightly
modified to detect the failure and strengthened so as future tests also
make sure that a node is in streaming state when waiting for its
catchup.
Backpatch down to 9.4 where this code has been introduced.
Reported-by: Sawada Masahiko
Author: Simon Riggs, Sawada Masahiko
Reviewed-by: Petr Jelinek, Michael Paquier, Vaishnavi Prabakaran
Discussion: https://postgr.es/m/CAD21AoB2ZbCCqOx=bgKMcLrAvs1V0ZMqzs7wBTuDySezTGtMZA@mail.gmail.com
In TAP test functions, that is, those that produce test results, locally
increment $Test::Builder::Level. This has the effect that test failures
are reported at the callers location rather than somewhere in the test
support libraries.
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
search.cpan.org has been EOL'd, with metacpan.org being the official
replacement to which URLs now redirect. Update links to match the new
URL. Also update links to CPAN to use https as it will redirect from
http.
Author: Daniel Gustafsson
Discussion: https://postgr.es/m/B74C0219-6BA9-46E1-A524-5B9E8CD3BDB3@yesql.se
This complies with the perlcritic policy
Subroutines::RequireFinalReturn, which is a severity 4 policy. Since we
only currently check at severity level 5, the policy is raised to that
level until we move to level 4 or lower, so that any new infringements
will be caught.
A small cosmetic piece of tidying of the pgperlcritic script is
included.
Mike Blackwell
Discussion: https://postgr.es/m/CAESHdJpfFm_9wQnQ3koY3c91FoRQsO-fh02za9R3OEMndOn84A@mail.gmail.com
The vertical tightness settings collapse vertical whitespace between
opening and closing brackets (parentheses, square brakets and braces).
This can make data structures in particular harder to read, and is not
very consistent with our style in non-Perl code. This patch restricts
that setting to parentheses only, and reformats all the perl code
accordingly. Not applying this to parentheses has some unfortunate
effects, so the consensus is to keep the setting for parentheses and not
for the others.
The diff for this patch does highlight some places where structures
should have trailing commas. They can be added manually, as there is no
automatic tool to do so.
Discussion: https://postgr.es/m/a2f2b87c-56be-c070-bfc0-36288b4b41c1@2ndQuadrant.com
Commit 6271fceb8 changed PostgresNode.pm to force log_min_messages = debug1
in all TAP tests, without any discussion and without a concrete need for
it. This makes some of the TAP tests noticeably slower (although much of
that may be due to poorly-written regexes), and for certain it's bloating
the buildfarm logs. Revert the change.
Discussion: https://postgr.es/m/32459.1525657786@sss.pgh.pa.us
Allow the cluster to be optionally init'd with read access for the
group.
This means a relatively non-privileged user can perform a backup of the
cluster without requiring write privileges, which enhances security.
The mode of PGDATA is used to determine whether group permissions are
enabled for directory and file creates. This method was chosen as it's
simple and works well for the various utilities that write into PGDATA.
Changing the mode of PGDATA manually will not automatically change the
mode of all the files contained therein. If the user would like to
enable group access on an existing cluster then changing the mode of all
the existing files will be required. Note that pg_upgrade will
automatically change the mode of all migrated files if the new cluster
is init'd with the -g option.
Tests are included for the backend and all the utilities which operate
on the PG data directory to ensure that the correct mode is set based on
the data directory permissions.
Author: David Steele <david@pgmasters.net>
Reviewed-By: Michael Paquier, with discussion amongst many others.
Discussion: https://postgr.es/m/ad346fe6-b23e-59f1-ecb7-0e08390ad629%40pgmasters.net
Consolidate directory and file create permissions for tools which work
with the PG data directory by adding a new module (common/file_perm.c)
that contains variables (pg_file_create_mode, pg_dir_create_mode) and
constants to initialize them (0600 for files and 0700 for directories).
Convert mkdir() calls in the backend to MakePGDirectory() if the
original call used default permissions (always the case for regular PG
directories).
Add tests to make sure permissions in PGDATA are set correctly by the
tools which modify the PG data directory.
Authors: David Steele <david@pgmasters.net>,
Adam Brightwell <adam.brightwell@crunchydata.com>
Reviewed-By: Michael Paquier, with discussion amongst many others.
Discussion: https://postgr.es/m/ad346fe6-b23e-59f1-ecb7-0e08390ad629%40pgmasters.net
This was nearly the same code. Extend wait_for_catchup to allow waiting
for pg_current_wal_lsn() and use that in the subscription tests. Also
change one use in the pg_rewind tests to use this.
Also remove some broken code in wait_for_catchup and
wait_for_slot_catchup. The error message in case the waiting failed
wanted to show the current LSN, but the way it was written never
worked. So since nobody ever cared, just remove it.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
