a new postmaster child process. This should eliminate problems with
authentication blocking (e.g., ident, SSL init) and also reduce problems
with the accept queue filling up under heavy load.
The option to send elog output to a different file per backend (postgres -o)
has been disabled for now because the initialization would have to happen
in a different order and it's not clear we want to keep this anyway.
Use --enable-nls to turn it on; see installation instructions for details.
See developer's guide how to make use of it in programs and how to add
translations.
psql sources have been almost fully prepared and an incomplete German
translation has been provided. In the backend, only elog() calls are
currently translatable, and the provided German translation file is more
of a placeholder.
eliminates a raft of portability issues, including whether sys_nerr
exists, whether the platform has any valid negative errnos, etc. The
downside is minimal: errno shouldn't ever contain an invalid value anyway,
and if it does, reasonably modern versions of strerror will not choke.
This rangecheck idea seemed good at the time, but it's clearly a net loss,
and I apologize to all concerned for having ever put it in.
of c.h altogether, and putting it into the only places that use it
(elog.c and exc.c), instead. Modify these routines to check for a
NULL or empty-string return from strerror, too, since some platforms
define strerror to return empty string for unknown errors (what a useless
definition that is ...). Clean up some cruft in ExcPrint while at it.
are treated more like 'cancel' interrupts: the signal handler sets a
flag that is examined at well-defined spots, rather than trying to cope
with an interrupt that might happen anywhere. See pghackers discussion
of 1/12/01.
to ensure that we have released buffer refcounts and so forth, rather than
putting ad-hoc operations before (some of the calls to) proc_exit. Add
commentary to discourage future hackers from repeating that mistake.
since those routines may do palloc's. We want to be fairly sure we can
send the error message to the client even under low-memory conditions.
That's what we stashed away 8K in ErrorContext for, after all ...
> > suspect...), so here is an updated patch.
>
> This seems like the wrong way to go about it, because anytime anyone
> changes any elog output anywhere, we'll risk another failure. If
> syslog can't cope with empty lines, I think the right fix is for the
> output-to-syslog routine to change the data just before sending ---
> then there is only one place to fix. See the syslog output routine in
> src/backend/utils/error/elog.c.
Makes sense. Here's a new patch, now the output even looks better:
Larry Rosenman
adds the facility to set the program name used in syslog.
(this includes the other ones).
One gotcha, the parser doesn't like special characters in strings.
For example, i tried to use pg-test, and if failed the parse coming
from the postgresql.conf file.
I don't think it's a showstopper..
Larry Rosenman
after that dynamic loading isn't working and shared memory handling is
broken.
Attached with this message, there is a Zip file which contain :
* beos.diff = patch file generated with difforig
* beos = folder with beos support files which need to be moved in /
src/backend/port
* expected = foler with three file for message and precision
difference in regression test
* regression.diff = rule problem (need to kill the backend manualy)
* dynloader = dynloader files (they are also in the pacth files,
but there is so much modification that I have join full files)
Everything works except a problem in 'rules' Is there some problems
with rules in the current tree ? It used to works with last week tree.
Cyril VELTER
working on the VERY latest version of BeOS. I'm sure there will be
alot of comments, but then if there weren't I'd be disappointed!
Thanks for your continuing efforts to get this into your tree.
Haven't bothered with the new files as they haven't changed.
BTW Peter, the compiler is "broken" about the bool define and so on.
I'm filing a bug report to try and get it addressed. Hopefully then we
can tidy up the code a bit.
I await the replies with interest :)
David Reid
for details). It doesn't really do that much yet, since there are no
short-term memory contexts in the executor, but the infrastructure is
in place and long-term contexts are handled reasonably. A few long-
standing bugs have been fixed, such as 'VACUUM; anything' in a single
query string crashing. Also, out-of-memory is now considered a
recoverable ERROR, not FATAL.
Eliminate a large amount of crufty, now-dead code in and around
memory management.
Fix problem with holding off SIGTRAP, SIGSEGV, etc in postmaster and
backend startup.
That means you can now set your options in either or all of $PGDATA/configuration,
some postmaster option (--enable-fsync=off), or set a SET command. The list of
options is in backend/utils/misc/guc.c, documentation will be written post haste.
pg_options is gone, so is that pq_geqo config file. Also removed were backend -K,
-Q, and -T options (no longer applicable, although -d0 does the same as -Q).
Added to configure an --enable-syslog option.
changed all callers from TPRINTF to elog(DEBUG)
subsequent elogs() in the same COPY operation to display the wrong
line number. Fix is to clear lineno only when elog level is such
that we will not return to caller.
this is an old patch which I have already submitted and never seen
in the sources. It corrects the datatype oids used in some iterator
functions. This bug has been reported to me by many other people.
contrib-datetime.patch
some code contributed by Reiner Dassing <dassing@wettzell.ifag.de>
contrib-makefiles.patch
fixes all my contrib makefiles which don't work with some compilers,
as reported to me by another user.
contrib-miscutil.patch
an old patch for one of my old contribs.
contrib-string.patch
a small change to the c-like text output functions. Now the '{'
is escaped only at the beginning of the string to distinguish it
from arrays, and the '}' is no more escaped.
elog-lineno.patch
adds the current lineno of CopyFrom to elog messages. This is very
useful when you load a 1 million tuples table from an external file
and there is a bad value somehere. Currently you get an error message
but you can't know where is the bad data. The patch uses a variable
which was declared static in copy.c. The variable is now exported
and initialized to 0. It is always cleared at the end of the copy
or at the first elog message or when the copy is canceled.
I know this is very ugly but I can't find any better way of knowing
where the copy fails and I have this problem quite often.
plperl-makefile.patch
fixes a typo in a makefile, but the error must be elsewhere because
it is a file generated automatically. Please have a look.
tprintf-timestamp.patch
restores the original 2-digit year format, assuming that the two
century digits don't carry much information and that '000202' is
easier to read than 20000202. Being only a log file it shouldn't
break anything.
Please apply the patches before the next scheduled code freeze.
I also noticed that some of the contribs don't compile correcly. Should we
ask people to fix their code or rename their makefiles so that they are
ignored by the top makefile?
--
Massimo Dal Zotto
during InitProcessingMode and the CurrentTransactionState was neither
TRANS_DEFAULT nor TRANS_DISABLED. Unfortunately, after someone's recent
change to start the transaction manager earlier in startup than it used
to be started, that caused an abort() and consequent database system
reset on quite harmless errors (such as rejecting an invalid user name!).
As far as I can see, the test on CurrentTransactionState was completely
useless anyway, so I've removed it.
for the case of errors in backend startup, and proc_exit's method for
coping with errors during proc_exit was *completely* busted. Fixed per
discussions on pghackers around 11/6/99.
Warn_restart has been set by the backend main loop. This means that
elog(ERROR) or elog(FATAL) in the postmaster or during backend startup
now have well-defined behavior: proc_exit() rather than coredump.
In the case of elog() inside the postmaster, I think that proc_exit()
is probably not enough --- don't we want our child backends to be
forced to quit too? But I don't understand Vadim's recent changes in
this area, so I'll leave it to him to look over and tweak if needed.
eliminating some wildly inconsistent coding in various parts of the
system. I set MAXPGPATH = 1024 in config.h.in. If anyone is really
convinced that there ought to be a configure-time test to set the
value, go right ahead ... but I think it's a waste of time.
This change seems necessary in conjunction with long queries, and it
cleans up some bogosity in connection with long EXPLAIN texts anyway.
Note that current libpq will accept any length error message (at least
until it runs out of memory); prior versions have a limit of 8K, but
will cleanly discard excess error text, so there shouldn't be any
big compatibility problems with old clients.
can be generated in a buffer and then sent to the frontend in a single
libpq call. This solves problems with NOTICE and ERROR messages generated
in the middle of a data message or COPY OUT operation.
instead of doing a kill(self, SIGQUIT) and expecting the signal handler
to do it. Also, clean up inconsistent definitions of the sigjmp buffer
in the several files that already referenced it.
MyProcPid global variable is set to 0 when postgres starts as a command
(not as a backend daemon). This leads issuing SIGQUIT to the process group,
not the process itself. As a result, parent sh gets core dumped in the
Wisconsin benchmark test.
