More precisely, what we do here is make the SLRU cache sizes
configurable with new GUCs, so that sites with high concurrency and big
ranges of transactions in flight (resp. multixacts/subtransactions) can
benefit from bigger caches. In order for this to work with good
performance, two additional changes are made:
1. the cache is divided in "banks" (to borrow terminology from CPU
caches), and algorithms such as eviction buffer search only affect
one specific bank. This forestalls the problem that linear searching
for a specific buffer across the whole cache takes too long: we only
have to search the specific bank, whose size is small. This work is
authored by Andrey Borodin.
2. Change the locking regime for the SLRU banks, so that each bank uses
a separate LWLock. This allows for increased scalability. This work
is authored by Dilip Kumar. (A part of this was previously committed as
d172b717c6f4.)
Special care is taken so that the algorithms that can potentially
traverse more than one bank release one bank's lock before acquiring the
next. This should happen rarely, but particularly clog.c's group commit
feature needed code adjustment to cope with this. I (Álvaro) also added
lots of comments to make sure the design is sound.
The new GUCs match the names introduced by bcdfa5f2e2 in the
pg_stat_slru view.
The default values for these parameters are similar to the previous
sizes of each SLRU. commit_ts, clog and subtrans accept value 0, which
means to adjust by dividing shared_buffers by 512 (so 2MB for every 1GB
of shared_buffers), with a cap of 8MB. (A new slru.c function
SimpleLruAutotuneBuffers() was added to support this.) The cap was
previously 1MB for clog, so for sites with more than 512MB of shared
memory the total memory used increases, which is likely a good tradeoff.
However, other SLRUs (notably multixact ones) retain smaller sizes and
don't support a configured value of 0. These values based on
shared_buffers may need to be revisited, but that's an easy change.
There was some resistance to adding these new GUCs: it would be better
to adjust to memory pressure automatically somehow, for example by
stealing memory from shared_buffers (where the caches can grow and
shrink naturally). However, doing that seems to be a much larger
project and one which has made virtually no progress in several years,
and because this is such a pain point for so many users, here we take
the pragmatic approach.
Author: Andrey Borodin <x4mmm@yandex-team.ru>
Author: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Amul Sul, Gilles Darold, Anastasia Lubennikova,
Ivan Lazarev, Robert Haas, Thomas Munro, Tomas Vondra,
Yura Sokolov, Васильев Дмитрий (Dmitry Vasiliev).
Discussion: https://postgr.es/m/2BEC2B3F-9B61-4C1D-9FB5-5FAB0F05EF86@yandex-team.ru
Discussion: https://postgr.es/m/CAFiTN-vzDvNz=ExGXz6gdyjtzGixKSqs0mKHMmaQ8sOSEFZ33A@mail.gmail.com
There isn't a lot of user demand for AIX support, we have a bunch of
hacks to work around AIX-specific compiler bugs and idiosyncrasies,
and no one has stepped up to the plate to properly maintain it.
Remove support for AIX to get rid of that maintenance overhead. It's
still supported for stable versions.
The acute issue that triggered this decision was that after commit
8af2565248, the AIX buildfarm members have been hitting this
assertion:
TRAP: failed Assert("(uintptr_t) buffer == TYPEALIGN(PG_IO_ALIGN_SIZE, buffer)"), File: "md.c", Line: 472, PID: 2949728
Apperently the "pg_attribute_aligned(a)" attribute doesn't work on AIX
for values larger than PG_IO_ALIGN_SIZE, for a static const variable.
That could be worked around, but we decided to just drop the AIX support
instead.
Discussion: https://www.postgresql.org/message-id/20240224172345.32@rfd.leadboat.com
Reviewed-by: Andres Freund, Noah Misch, Thomas Munro
The new names are intended to match those in an upcoming patch that adds
a few GUCs to configure the SLRU buffer sizes.
Backwards compatibility concern: this changes the accepted names for
function pg_stat_slru_rest(). Since this function recognizes "any other
string" as a request to reset the entry for "other", this means that
calling it with the old names would silently reset "other" instead of
doing nothing or throwing an error.
Reviewed-by: Andrey M. Borodin <x4mmm@yandex-team.ru>
Discussion: https://postgr.es/m/202402261616.dlriae7b6emv@alvherre.pgsql
Add a note about the additional privileges required after the fix in
4989ce7264 (wording per Tom Lane); also change marked-up mentions of
"target_table_name" to be simply "the target table" or the like. Also,
note that "join_condition" is scouted for requisite privileges.
Backpatch to 15.
Discussion: https://postgr.es/m/202402211653.zuh6objy3z72@alvherre.pgsql
By enabling slot synchronization, all the failover logical replication
slots on the primary (assuming configurations are appropriate) are
automatically created on the physical standbys and are synced
periodically. The slot sync worker on the standby server pings the primary
server at regular intervals to get the necessary failover logical slots
information and create/update the slots locally. The slots that no longer
require synchronization are automatically dropped by the worker.
The nap time of the worker is tuned according to the activity on the
primary. The slot sync worker waits for some time before the next
synchronization, with the duration varying based on whether any slots were
updated during the last cycle.
A new parameter sync_replication_slots enables or disables this new
process.
On promotion, the slot sync worker is shut down by the startup process to
drop any temporary slots acquired by the slot sync worker and to prevent
the worker from trying to fetch the failover slots.
A functionality to allow logical walsenders to wait for the physical will
be done in a subsequent commit.
Author: Shveta Malik, Hou Zhijie based on design inputs by Masahiko Sawada and Amit Kapila
Reviewed-by: Masahiko Sawada, Bertrand Drouvot, Peter Smith, Dilip Kumar, Ajin Cherian, Nisha Moond, Kuroda Hayato, Amit Kapila
Discussion: https://postgr.es/m/514f6f2f-6833-4539-39f1-96cd1e011f23@enterprisedb.com
The explanation of interval's behavior in datatype.sgml wasn't wrong
exactly, but it was unclear, partly because it buried the lede about
there being three internal fields. Rearrange and wordsmith for more
clarity.
The discussion of extract() claimed that input of type date was
handled by casting, but actually there's been a separate SQL function
taking date for a very long time. Also, it was mostly silent about
how interval inputs are handled, but there are several field types
for which it seems useful to be specific.
Improve discussion of justify_days()/justify_hours() too.
In passing, remove vertical space in some groups of examples,
as there was little consistency about whether to have such space
or not. (I only did this within the datetime functions section;
there are some related inconsistencies elsewhere.)
Per discussion of bug #18348 from Michael Bondarenko. There
may be some code changes coming out of that discussion too,
but we likely won't back-patch them. This docs-only patch
seems useful to back-patch, though I only carried it back to
v13 because it didn't apply easily in v12.
Discussion: https://postgr.es/m/18348-b097a3587dfde8a4@postgresql.org
A child table can specify a compression or storage method different
from its parents. This was previously an error. (But this was
inconsistently enforced because for example the settings could be
changed later using ALTER TABLE.) This now also allows an explicit
override if multiple parents have different compression or storage
settings, which was previously an error that could not be overridden.
The compression and storage properties remains unchanged in a child
inheriting from parent(s) after its creation, i.e., when using ALTER
TABLE ... INHERIT. (This is not changed.)
Before this change, the error detail would mention the first pair of
conflicting parent compression or storage methods. But with this
change it waits till the child specification is considered by which
time we may have encountered many such conflicting pairs. Hence the
error detail after this change does not include the conflicting
compression/storage methods. Those can be obtained from parent
definitions if necessary. The code to maintain list of all
conflicting methods or even the first conflicting pair does not seem
worth the convenience it offers. This change is inline with what we
do with conflicting default values.
Before this commit, the specified storage method could be stored in
ColumnDef::storage (CREATE TABLE ... LIKE) or ColumnDef::storage_name
(CREATE TABLE ...). This caused the MergeChildAttribute() and
MergeInheritedAttribute() to ignore a storage method specified in the
child definition since it looked only at ColumnDef::storage. This
commit removes ColumnDef::storage and instead uses
ColumnDef::storage_name to save any storage method specification. This
is similar to how compression method specification is handled.
Author: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/24656cec-d6ef-4d15-8b5b-e8dfc9c833a7@eisentraut.org
This commit adds timeout that is expected to be used as a prevention
of long-running queries. Any session within the transaction will be
terminated after spanning longer than this timeout.
However, this timeout is not applied to prepared transactions.
Only transactions with user connections are affected.
Discussion: https://postgr.es/m/CAAhFRxiQsRs2Eq5kCo9nXE3HTugsAAJdSQSmxncivebAxdmBjQ%40mail.gmail.com
Author: Andrey Borodin <amborodin@acm.org>
Author: Japin Li <japinli@hotmail.com>
Author: Junwang Zhao <zhjwpku@gmail.com>
Reviewed-by: Nikolay Samokhvalov <samokhvalov@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: bt23nguyent <bt23nguyent@oss.nttdata.com>
Reviewed-by: Yuhang Qiu <iamqyh@gmail.com>
Setting the environment variable PG_TEST_INITDB_EXTRA_OPTS passes
extra options to initdb run by pg_regress or
PostgreSQL::Test::Cluster's init.
This can be useful for a wide variety of uses, like running all tests
with checksums enabled, or with JIT enabled, or with different GUC
settings, or with different locale settings. (Not all tests are going
to pass with arbitrary options, but it is useful to run this against
specific test suites.)
Reviewed-by: Ian Lawrence Barwick <barwick@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/d4d2ad9f-1c1d-47a1-bb4d-c10a747d4f15%40eisentraut.org
Presently, we rely on each individual signal handler to save the
initial value of errno and then restore it before returning if
needed. This is easily forgotten and, if missed, often goes
undetected for a long time.
In commit 3b00fdba9f, we introduced a wrapper signal handler
function that checks whether MyProcPid matches getpid(). This
commit moves the aforementioned errno restoration code from the
individual signal handlers to the new wrapper handler so that we no
longer need to worry about missing it.
Reviewed-by: Andres Freund, Noah Misch
Discussion: https://postgr.es/m/20231121212008.GA3742740%40nathanxps13
The pgcrypto docs contained a set of links for useful reading and
technical references. These sets of links were however not actively
curated and had stale content and dead links. Rather than investing
time into maintining these, this removes them altogether since there
are lots of resources online which are actively maintained.
Backpatch to all supported versions since these links have been in
the docs for a long time.
Reported-by: Hanefi Onaldi <hanefi.onaldi@microsoft.com>
Reviewed-by: Magnus Hagander <magnus@hagander.net>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/170774255387.3279713.2822272755998870925@wrigleys.postgresql.org
Backpatch-through: v12
This commit introduces a new SQL function pg_sync_replication_slots()
which is used to synchronize the logical replication slots from the
primary server to the physical standby so that logical replication can be
resumed after a failover or planned switchover.
A new 'synced' flag is introduced in pg_replication_slots view, indicating
whether the slot has been synchronized from the primary server. On a
standby, synced slots cannot be dropped or consumed, and any attempt to
perform logical decoding on them will result in an error.
The logical replication slots on the primary can be synchronized to the
hot standby by using the 'failover' parameter of
pg-create-logical-replication-slot(), or by using the 'failover' option of
CREATE SUBSCRIPTION during slot creation, and then calling
pg_sync_replication_slots() on standby. For the synchronization to work,
it is mandatory to have a physical replication slot between the primary
and the standby aka 'primary_slot_name' should be configured on the
standby, and 'hot_standby_feedback' must be enabled on the standby. It is
also necessary to specify a valid 'dbname' in the 'primary_conninfo'.
If a logical slot is invalidated on the primary, then that slot on the
standby is also invalidated.
If a logical slot on the primary is valid but is invalidated on the
standby, then that slot is dropped but will be recreated on the standby in
the next pg_sync_replication_slots() call provided the slot still exists
on the primary server. It is okay to recreate such slots as long as these
are not consumable on standby (which is the case currently). This
situation may occur due to the following reasons:
- The 'max_slot_wal_keep_size' on the standby is insufficient to retain
WAL records from the restart_lsn of the slot.
- 'primary_slot_name' is temporarily reset to null and the physical slot
is removed.
The slot synchronization status on the standby can be monitored using the
'synced' column of pg_replication_slots view.
A functionality to automatically synchronize slots by a background worker
and allow logical walsenders to wait for the physical will be done in
subsequent commits.
Author: Hou Zhijie, Shveta Malik, Ajin Cherian based on an earlier version by Peter Eisentraut
Reviewed-by: Masahiko Sawada, Bertrand Drouvot, Peter Smith, Dilip Kumar, Nisha Moond, Kuroda Hayato, Amit Kapila
Discussion: https://postgr.es/m/514f6f2f-6833-4539-39f1-96cd1e011f23@enterprisedb.com
The macOS Finder application creates .DS_Store files in directories
when opened, which creates problems for serverside utilities which
expect all files to be PostgreSQL specific files. Skip these files
when encountered in pg_checksums, pg_rewind and pg_basebackup.
This was extracted from a larger patchset for skipping hidden files
and system files, where the concencus was to just skip these. Since
this is equally likely to happen in every version, backpatch to all
supported versions.
Reported-by: Mark Guertin <markguertin@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Tobias Bussmann <t.bussmann@gmx.net>
Discussion: https://postgr.es/m/E258CE50-AB0E-455D-8AAD-BB4FE8F882FB@gmail.com
Backpatch-through: v12
Timezones are not immutable and so neither is any function that relies on
them. In commit 66ea94e8, we introduced a few methods which do casting
from one time to another and thus may involve the current timezone. To
preserve the immutability of jsonpath functions currently marked
immutable, disallow these methods from being called from non-TZ aware
functions.
Jeevan Chalke, per a report from Jian He.
Commit b0f0a9432d backpatched some code from upstream DocBook XSL to
our customization layer. It turned out that this failed to work with
anything but the latest DocBook XSL upstream version (1.79.*), because
the backpatched code references an XSLT parameter (autolink.index.see)
that is not defined in earlier versions (because the feature it is
used for did not exist yet).
There is no way in XSLT to test whether a parameter is declared before
the stylesheet processor tries and fails to access it. So the
possibilities to fix this would be to either remove the code that uses
the parameter (and thus give up on the feature it is used for) or
declare the parameter in our customization layer. The latter seems
easier, and with a few more lines of code we can backport the entire
autolink.index.see feature, so let's do that. (If we didn't, then
with older stylesheets the parameter will appear as on, but it won't
actually do anything, because of the way the stylesheets are laid out,
so it's less confusing to just make it work.)
With this, the documentation build should work again with docbook-xsl
versions 1.77.*, 1.78.*, and 1.79.* (which already worked before).
Version 1.76.1 already didn't work before all this, so was not
considered here.
Reported-by: Peter Smith <smithpb2250@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/9077b779-a9f8-09c8-6e85-da1ebfba15af@eisentraut.org
Cover scram_iterations, which was added in commit b577743000. While
at it, turn the list into a <simplelist> with 2 columns, which is much
nicer to read.
In master, remove mentions of antediluvian versions before which some
parameters were not reported.
Noticed while investigating a question by Maiquel Grassi.
Backpatch to 16.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Jelte Fennema-Nio <postgres@jeltef.nl>
Discussion: https://postgr.es/m/202401301236.mc5ebrohhtsd@alvherre.pgsql
Following are a few clean-ups related to failover option support in slots:
1. Improve the documentation in create_subscription.sgml.
2. Remove the spurious blank line in subscriptioncmds.c.
3. Remove the NOTICE for alter_replication_slot in subscriptioncmds.c as
we would sometimes print it even when nothing has changed. One can find
the change by enabling log_replication_commands on the publisher.
4. Optimize ReplicationSlotAlter() function to prevent disk flushing when
the slot's data remains unchanged.
Author: Hou Zhijie
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/514f6f2f-6833-4539-39f1-96cd1e011f23@enterprisedb.com
Discussion: https://postgr.es/m/OS0PR01MB57164904651FB588A518E98894472@OS0PR01MB5716.jpnprd01.prod.outlook.com
The pg_stat_io and pg_stat_copy_progress view docs spelled "I/O" as "IO"
or even "io" in some places when not referring to literal names or
string values.
Author: Dagfinn Ilmari Mannsåker
Discussion: https://postgr.es/m/87fry6lx5s.fsf@wibble.ilmari.org
Role option management was changed in Postgres 16. This patch improves
the docs around these changes, including CREATE ROLE's INHERIT option,
inheritance handling, and grant's ability to change role options.
Discussion: https://postgr.es/m/Zab9GiV63EENDcWG@momjian.us
Co-authored-by: David G. Johnston
Backpatch-through: 16
The Parameters subsection had an extra TRIGGER in the grammar
for DISABLE/ENABLE which is incorrect. Backpatch down to all
supported versions since it's been like this all along.
Discussion: https://postgr.es/m/0AFB171E-7E78-4A90-A140-46AB270212CA@yesql.se
Backpatch-through: v12
The openssl command for displaying the DN of a client certificate was
using --subject and not the single-dash option -subject. While recent
versions of openssl handles double dash options, earlier does not so
fix by using just -subject (which is per the openssl documentation).
Backpatch to v14 where this was introduced.
Reported-by: konkove@gmail.com
Discussion: https://postgr.es/m/170672168899.666.10442618407194498217@wrigleys.postgresql.org
Backpatch-through: v14
This was already documented in the CREATE INDEX reference, but not in
the introductory "Data Definition" chapter. Also, document that the
index that implements a constraint has the same name as the
constraint.
Author: Laurenz Albe <laurenz.albe@cybertec.at>
Reviewed-by: jian he <jian.universality@gmail.com>
Reviewed-by: David G. Johnston <david.g.johnston@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CACJufxFG682tYcP9aH_F-jrqq5End8MHZR77zcp1%3DDUrEsSu1Q%40mail.gmail.com
This commit introduces a new subscription option named 'failover', which
provides users with the ability to set the failover property of the
replication slot on the publisher when creating or altering a
subscription.
This uses the replication commands introduced by commit 7329240437 to
enable the failover option for a logical replication slot.
If the failover option is set to true, the associated replication slots
(i.e. the main slot and the table sync slots) in the upstream database are
enabled to be synchronized to the standbys. Note that the capability to
sync the replication slots will be added in subsequent commits.
Thanks to Masahiko Sawada for the design inputs.
Author: Shveta Malik, Hou Zhijie, Ajin Cherian
Reviewed-by: Peter Smith, Bertrand Drouvot, Dilip Kumar, Masahiko Sawada, Nisha Moond, Kuroda Hayato, Amit Kapila
Discussion: https://postgr.es/m/514f6f2f-6833-4539-39f1-96cd1e011f23@enterprisedb.com
We seem to have only documented a foreign key can reference the columns of
a primary key or unique constraint. Here we adjust the documentation
to mention columns in a non-partial unique index can be mentioned too.
The header comment for transformFkeyCheckAttrs() also didn't mention
unique indexes, so fix that too. In passing make that header comment
reflect reality in the various other aspects where it deviated from it.
Bug: 18295
Reported-by: Gilles PARC
Author: Laurenz Albe, David Rowley
Discussion: https://www.postgresql.org/message-id/18295-0ed0fac5c9f7b17b%40postgresql.org
Backpatch-through: 12
This adds a new "Memory:" line under the "Planning:" group (which
currently only has "Buffers:") when the MEMORY option is specified.
In order to make the reporting reasonably accurate, we create a separate
memory context for planner activities, to be used only when this option
is given. The total amount of memory allocated by that context is
reported as "allocated"; we subtract memory in the context's freelists
from that and report that result as "used". We use
MemoryContextStatsInternal() to obtain the quantities.
The code structure to show buffer usage during planning was not in
amazing shape, so I (Álvaro) modified the patch a bit to clean that up
in passing.
Author: Ashutosh Bapat
Reviewed-by: David Rowley, Andrey Lepikhov, Jian He, Andy Fan
Discussion: https://www.postgresql.org/message-id/CAExHW5sZA=5LJ_ZPpRO-w09ck8z9p7eaYAqq3Ks9GDfhrxeWBw@mail.gmail.com
This function served to support having prebuilt files in the source
tree for vpath builds. This is no longer possible (since
721856ff24); all built files are now always in the build tree. The
invocations of this function are no longer required.
This commit implements a new replication command called
ALTER_REPLICATION_SLOT and a corresponding walreceiver API function named
walrcv_alter_slot. Additionally, the CREATE_REPLICATION_SLOT command has
been extended to support the failover option.
These new additions allow the modification of the failover property of a
replication slot on the publisher. A subsequent commit will make use of
these commands in subscription commands and will add the tests as well to
cover the functionality added/changed by this commit.
Author: Hou Zhijie, Shveta Malik
Reviewed-by: Peter Smith, Bertrand Drouvot, Dilip Kumar, Masahiko Sawada, Nisha Moond, Kuroda, Hayato, Amit Kapila
Discussion: https://postgr.es/m/514f6f2f-6833-4539-39f1-96cd1e011f23@enterprisedb.com
Formerly, these were only supported in to_char(), but there seems
little reason for that restriction. We should at least have enough
support to permit round-tripping the output of to_char().
In that spirit, TZ accepts either zone abbreviations or numeric
(HH or HH:MM) offsets, which are the cases that to_char() can output.
In an ideal world we'd make it take full zone names too, but
that seems like it'd introduce an unreasonable amount of ambiguity,
since the rules for POSIX-spec zone names are so lax.
OF is a subset of this, accepting only HH or HH:MM.
One small benefit of this improvement is that we can simplify
jsonpath's executeDateTimeMethod function, which no longer needs
to consider the HH and HH:MM cases separately. Moreover, letting
it accept zone abbreviations means it will accept "Z" to mean UTC,
which is emitted by JSON.stringify() for example.
Patch by me, reviewed by Aleksander Alekseev and Daniel Gustafsson
Discussion: https://postgr.es/m/1681086.1686673242@sss.pgh.pa.us
Clarify the behavior of jsonpath operators and functions by
describing their two different modes of operation explicitly.
In addition to the SQL-spec behavior, where a path returns
a list of matching items, we have a "predicate check" form
that always returns a single boolean result. That was mentioned
in only one place, but it seems better to annotate each operator
and function as to which form(s) it takes. Also improve the
examples by converting them into actual executable SQL with
results, and do a bunch of incidental wordsmithing.
David Wheeler, reviewed by Erik Wienhold, Jian He, and myself
Discussion: https://postgr.es/m/7262A188-59CA-4A8A-AAD7-83D4FF0B9758@justatheory.com
This commit implements ithe jsonpath .bigint(), .boolean(),
.date(), .decimal([precision [, scale]]), .integer(), .number(),
.string(), .time(), .time_tz(), .timestamp(), and .timestamp_tz()
methods.
.bigint() converts the given JSON string or a numeric value to
the bigint type representation.
.boolean() converts the given JSON string, numeric, or boolean
value to the boolean type representation. In the numeric case, only
integers are allowed. We use the parse_bool() backend function
to convert a string to a bool.
.decimal([precision [, scale]]) converts the given JSON string
or a numeric value to the numeric type representation. If precision
and scale are provided for .decimal(), then it is converted to the
equivalent numeric typmod and applied to the numeric number.
.integer() and .number() convert the given JSON string or a
numeric value to the int4 and numeric type representation.
.string() uses the datatype's output function to convert numeric
and various date/time types to the string representation.
The JSON string representing a valid date/time is converted to the
specific date or time type representation using jsonpath .date(),
.time(), .time_tz(), .timestamp(), .timestamp_tz() methods. The
changes use the infrastructure of the .datetime() method and perform
the datatype conversion as appropriate. Unlike the .datetime()
method, none of these methods accept a format template and use ISO
DateTime format instead. However, except for .date(), the
date/time related methods take an optional precision to adjust the
fractional seconds.
Jeevan Chalke, reviewed by Peter Eisentraut and Andrew Dunstan.
This commit adds the failover property to the replication slot. The
failover property indicates whether the slot will be synced to the standby
servers, enabling the resumption of corresponding logical replication
after failover. But note that this commit does not yet include the
capability to sync the replication slot; the subsequent commits will add
that capability.
A new optional parameter 'failover' is added to the
pg_create_logical_replication_slot() function. We will also enable to set
'failover' option for slots via the subscription commands in the
subsequent commits.
The value of the 'failover' flag is displayed as part of
pg_replication_slots view.
Author: Hou Zhijie, Shveta Malik, Ajin Cherian
Reviewed-by: Peter Smith, Bertrand Drouvot, Dilip Kumar, Masahiko Sawada, Nisha Moond, Kuroda, Hayato, Amit Kapila
Discussion: https://postgr.es/m/514f6f2f-6833-4539-39f1-96cd1e011f23@enterprisedb.com
9e2d870119 enabled the COPY command to skip malformed data, however
there was no visibility into how many tuples were actually skipped
during the COPY FROM.
This commit adds a new "tuples_skipped" column to
pg_stat_progress_copy view to report the number of tuples that were
skipped because they contain malformed data.
Bump catalog version.
Author: Atsushi Torikoshi
Reviewed-by: Masahiko Sawada
Discussion: https://postgr.es/m/d12fd8c99adcae2744212cb23feff6ed%40oss.nttdata.com
Add WITHOUT OVERLAPS clause to PRIMARY KEY and UNIQUE constraints.
These are backed by GiST indexes instead of B-tree indexes, since they
are essentially exclusion constraints with = for the scalar parts of
the key and && for the temporal part.
Author: Paul A. Jungwirth <pj@illuminatedcomputing.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: jian he <jian.universality@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CA+renyUApHgSZF9-nd-a0+OPGharLQLO=mDHcY4_qQ0+noCUVg@mail.gmail.com
This change adds a new meta-command called \syncpipeline to pgbench,
able to send a sync message without flushing using the new libpq
function PQsendPipelineSync().
This meta-command is available within a block made of \startpipeline and
\endpipeline.
Author: Anthonin Bonnefoy
Discussion: https://postgr.es/m/CAO6_XqpcNhW6LZHLF-2NpPzdTbyMm4-RVkr3+AP5cOKSm9hrWA@mail.gmail.com
This adds a Node *escontext parameter to it and a bunch of functions
downstream to it, replacing any ereport()s in that path by either
errsave() or ereturn() as appropriate. This also adds code to those
functions where necessary to return early upon encountering a soft
error.
The changes here are mainly intended to suppress errors in the
functions of jsonfuncs.c. Functions in any external modules, such as
arrayfuncs.c, that those functions may in turn call are not changed
here based on the assumption that the various checks in jsonfuncs.c
functions should ensure that only values that are structurally valid
get passed to the functions in those external modules. An exception
is made for domain_check() to allow handling domain constraint
violation errors softly.
For testing, this adds a function jsonb_populate_record_valid(),
which returns true if jsonb_populate_record() would finish without
causing an error for the provided JSON object, false otherwise. Note
that jsonb_populate_record() internally calls populate_record(),
which in turn uses populate_record_field().
Extracted from a much larger patch to add SQL/JSON query functions.
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Author: Teodor Sigaev <teodor@sigaev.ru>
Author: Oleg Bartunov <obartunov@gmail.com>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Andrew Dunstan <andrew@dunslane.net>
Author: Amit Langote <amitlangote09@gmail.com>
Reviewers have included (in no particular order) Andres Freund,
Alexander Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers,
Zihong Yu, Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby,
Álvaro Herrera, Jian He, Peter Eisentraut
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Discussion: https://postgr.es/m/abd9b83b-aa66-f230-3d6d-734817f0995d%40postgresql.org
Discussion: https://postgr.es/m/CA+HiwqHROpf9e644D8BRqYvaAPmgBZVup-xKMDPk-nd4EpgzHw@mail.gmail.com
Discussion: https://postgr.es/m/CA+HiwqE4XTdfb1nW=Ojoy_tQSRhYt-q_kb6i5d4xcKyrLC1Nbg@mail.gmail.com
Alvaro Herrera