Previously, async.c got rid of duplicate notifications by scanning
the list of pending events to compare each one to the proposed new
event. This works okay for very small numbers of distinct events,
but degrades as O(N^2) for many events. We can improve matters by
using a hash table to probe for duplicates. So as not to add a
lot of overhead for the simple cases that the code did handle well
before, create the hash table only once a (sub)transaction has
queued more than 16 distinct notify events.
A downside is that we now have to do per-event work to propagate
a successful subtransaction's notify events up to its parent.
(But this isn't significant unless the subtransaction had many
events, in which case the O(N^2) behavior would have been in
play already, so we still come out ahead.)
We can make some lemonade out of this lemon, though: since we must
examine each event anyway, it's now possible to de-duplicate events
fully, rather than skipping that for events merged up from
subtransactions. Hence, remove the old weasel wording in notify.sgml
about whether de-duplication happens or not, and adjust the test
case in async-notify.spec that exhibited the old behavior.
While at it, rearrange the definition of struct Notification to make
it more compact and require just one palloc per event, rather than
two or three. This saves space when there are a lot of events,
in fact more than enough to buy back the space needed for the hash
table.
Patch by me, based on discussions around a different patch
submitted by Filip Rembiałkowski.
Discussion: https://postgr.es/m/17822.1564186806@sss.pgh.pa.us
VACUUM's reference page had this text, but ANALYZE's didn't. That's
a clear oversight given that section 5.7 explicitly delegates the
responsibility to define permissions requirements to the individual
commands' man pages.
Per gripe from Isaac Morland. Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAMsGm5fp3oBUs-2iRfii0iEO=fZuJALVyM2zJLhNTjG34gpAVQ@mail.gmail.com
Commit aa27977fe21a7dfa4da4376ad66ae37cb8f0d0b5 introduced this
restriction for pg_temp.function_name(arg); do likewise for types
created in temporary schemas. Programs that this breaks should add
"pg_temp." schema qualification or switch to arg::type_name syntax.
Back-patch to 9.4 (all supported versions).
Reviewed by Tom Lane. Reported by Tom Lane.
Security: CVE-2019-10208
This reverts commit 88bdbd3f746049834ae3cc972e6e650586ec3c9d.
As committed, statement sampling used the existing duration threshold
(log_min_duration_statement) when decide which statements to sample.
The issue is that even the longest statements are subject to sampling,
and so may not end up logged. An improvement was proposed, introducing
a second duration threshold, but it would not be backwards compatible.
So we've decided to revert this feature - the separate threshold should
be part of the feature itself.
Discussion: https://postgr.es/m/CAFj8pRDS8tQ3Wviw9%3DAvODyUciPSrGeMhJi_WPE%2BEB8%2B4gLL-Q%40mail.gmail.com
The tests collate.icu.utf8 and collate.linux.utf8 were previously only
run when explicitly selected via EXTRA_TESTS. They require a UTF8
database, because the error messages in the expected files refer to
that, and they use some non-ASCII characters in the tests. Since
users can select any locale and encoding for the regression test run,
it was not possible to include these tests automatically.
To fix, use psql's \if facility to check various prerequisites such as
platform and the server encoding and quit the tests at the very
beginning if the configuration is not adequate. We then need to
maintain alternative expected files for these tests, but they are very
tiny and never need to change after this.
These two tests are now run automatically as part of the regression
tests.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/052295c2-a2e1-9a21-bd36-8fbff8686cf3%402ndquadrant.com
The table has not been updated for some commands introduced in recent
releases, so refresh it. While on it, reorder entries alphabetically.
Backpatch all the way down for all the commands which have gone
missing.
Reported-by: Jeremy Smith
Discussion: https://postgr.es/m/15883-afff0ea3cc2dbbb6@postgresql.org
Backpatch-through: 9.4
When doing a schema-level or a database-level operation, a list of
relations to build is created which gets processed in parallel using
multiple connections, based on the recent refactoring for parallel slots
in src/bin/scripts/. System catalogs are processed first in a
serialized fashion to prevent deadlocks, followed by the rest done in
parallel.
This new option is not compatible with --system as reindexing system
catalogs in parallel can lead to deadlocks, and with --index as there is
no conflict handling for indexes rebuilt in parallel depending in the
same relation.
Author: Julien Rouhaud
Reviewed-by: Sergei Kornilov, Michael Paquier
Discussion: https://postgr.es/m/CAOBaU_YrnH_Jqo46NhaJ7uRBiWWEcS40VNRQxgFbqYo9kApUsg@mail.gmail.com
Make the directory where the pg_upgrade binary resides the default for
new bindir, as running the pg_upgrade binary from where the new
cluster is installed is a very common scenario. Setting this as the
defauly bindir for the new cluster will remove the need to provide it
explicitly via -B in many cases.
To support directories being missing from option parsing, extend the
directory check with a missingOk mode where the path must be filled at
a later point before being used. Also move the exec_path check to
earlier in setup to make sure we know the new cluster bindir when we
scan for required executables.
This removes the exec_path from the OSInfo struct as it is not used
anywhere.
Author: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/9328.1552952117@sss.pgh.pa.us
Turn most mentions of libpq functions into links. At id attributes to
most libpq functions, where not existing yet, so that they can be
linked to. (In a handful of cases there were problems with the PDF
processing toolchain, so those instances were not changed.)
Author: Fabien COELHO <coelho@cri.ensmp.fr>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/alpine.DEB.2.21.1905121032330.27203@lancre
When making an xref to a varlistentry, the stylesheets use the first
<term> as the link text. In the cases fixed here, the <term> element
contained extra whitespace that ended up being part of the link text,
which looked strange in the output in some cases. This whitespace is
significant, so remove it since we don't want it.
The ids for linking to libpq functions were previously all lower-case.
Change to mixed-case, matching the actual function name, for easier
readability in the source. The output isn't changed in a significant
way, since the ids are converted to lower or upper case for file names
and anchors.
Using pg_receivewal with synchronous_commit = remote_apply set in the
backend is incompatible if pg_receivewal is a synchronous standby as it
never applies WAL, so document this problem and solutions to it.
Backpatch to 9.6, where remote_apply has been added.
Author: Robert Haas, Jesper Pedersen
Reviewed-by: Laurenz Albe, Álvaro Herrera, Michael Paquier
Discussion: https://postgr.es/m/1427a2d3-1e51-9335-1931-4f8853d90d5e@redhat.com
Backpatch-through: 9.6
Change the defaults for the pg_hba.conf generated by initdb to "peer"
for local (if supported, else "md5") and "md5" for host.
(Changing from "md5" to SCRAM is left as a separate exercise.)
"peer" is currently not supported on AIX, HP-UX, and Windows. Users
on those operating systems will now either have to provide a password
to initdb or choose a different authentication method when running
initdb.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/bec17f0a-ddb1-8b95-5e69-368d9d0a3390%40postgresql.org
16828d5 has improved ALTER TABLE so as a column addition does not
require a rewrite for a non-NULL default with constant expressions, but
one spot in the documentation did not get updated consistently.
The documentation also now clarifies the fact that this does not apply
if the expression is volatile, where a table rewrite is still required.
Reported-by: Daniel Westermann
Author: Ian Barwick
Reviewed-by: Michael Paquier, Daniel Westermann
Discussion: https://postgr.es/m/DB6PR0902MB2184C7D5645CF15D75EB7957D2CF0@DB6PR0902MB2184.eurprd09.prod.outlook.com
Backpatch-through: 11
Now that commit fec0778c8 drew a clear line between public and private
fields in SPITupleTable, it seems pretty silly that the count of valid
tuples isn't on the public side of that line. The reason why not was
that there wasn't such a count. For reasons lost in the mists of time,
spi.c preferred to keep a count of remaining free entries in the array.
But that seems pretty pointless: it's unlike the way we handle similar
code everywhere else, and it involves extra subtractions that surely
outweigh having to do a comparison rather than test-for-zero to check
for array-full.
Hence, rearrange so that this code does the expansible array logic
the same as everywhere else, with a count of valid entries alongside
the allocated array length. And document the count as public.
I looked for core-code callers where it would make sense to start
relying on tuptable->numvals rather than the separate SPI_processed
variable. Right now there don't seem to be places where it'd be
a win to do so without more code restructuring than I care to
undertake today. In principle, though, having SPITupleTables be
fully self-contained should be helpful down the line.
Discussion: https://postgr.es/m/16852.1563395722@sss.pgh.pa.us
The documentation mentioned that data checksums cannot be changed after
initialization, which is not true as pg_checksums can do that with its
--enable option introduced in v12. This simply removes the sentence
telling so.
Reported-by: Basil Bourque
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/15909-e9d74271f1647472@postgresql.org
Backpatch-through: 12
The fields that we consider public are "tupdesc" and "vals", which
historically are in the middle of the struct. Move them to the front
(this should be perfectly safe to do in HEAD) and add comments to make
it quite clear which fields are public or not.
Also adjust spi.sgml's documentation of the struct to match.
That doc had bit-rotted somewhat, as it was missing some fields.
(Arguably we should just remove all the private fields from the docs,
but for now I refrained.)
Daniel Gustafsson, reviewed by Fabien Coelho
Discussion: https://postgr.es/m/0D19F836-B743-4340-B6A2-F148CA3DD1F0@yesql.se
At least on Fedora and RHEL, it's not in the same RPM that's needed
for building sepgsql itself. Today is the second or third time I've
had to rediscover how to install that, so let's document it this time.
This is numbered take 7, and addresses a set of issues around:
- Fixes for typos and incorrect reference names.
- Removal of unneeded comments.
- Removal of unreferenced functions and structures.
- Fixes regarding variable name consistency.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/10bfd4ac-3e7c-40ab-2b2e-355ed15495e8@gmail.com
This adds a built-in function to generate UUIDs.
PostgreSQL hasn't had a built-in function to generate a UUID yet,
relying on external modules such as uuid-ossp and pgcrypto to provide
one. Now that we have a strong random number generator built-in, we
can easily provide a version 4 (random) UUID generation function.
This patch takes the existing function gen_random_uuid() from pgcrypto
and makes it a built-in function. The pgcrypto implementation now
internally redirects to the built-in one.
Reviewed-by: Fabien COELHO <coelho@cri.ensmp.fr>
Discussion: https://www.postgresql.org/message-id/6a65610c-46fc-2323-6b78-e8086340a325@2ndquadrant.com
Index-based calculation of this operator is exact. So, signature of
gist_bbox_distance() function is changes so that caller is responsible for
setting *recheck flag.
Discussion: https://postgr.es/m/f71ba19d-d989-63b6-f04a-abf02ad9345d%40postgrespro.ru
Author: Nikita Glukhov
Reviewed-by: Tom Lane, Alexander Korotkov
This addresses a couple of issues in the code:
- Typos and inconsistencies in comments and function declarations.
- Removal of unreferenced function declarations.
- Removal of unnecessary compile flags.
- A cleanup error in regressplans.sh.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/0c991fdf-2670-1997-c027-772a420c4604@gmail.com
The code for conversions SQL_ASCII <-> MULE_INTERNAL and
SQL_ASCII <-> UTF8 was unreachable, because we long ago changed
the wrapper functions pg_do_encoding_conversion() et al so that
they have hard-wired behaviors for conversions involving SQL_ASCII.
(At least some of those fast paths date back to 2002, though it
looks like we may not have been totally consistent about this until
later.) Given the lack of complaints, nobody is dissatisfied with
this state of affairs. Hence, let's just remove the unreachable code.
Also, change CREATE CONVERSION so that it rejects attempts to
define such conversions. Since we consider that SQL_ASCII represents
lack of knowledge about the encoding in use, such a conversion would
be semantically dubious even if it were reachable.
Adjust a couple of regression test cases that had randomly decided
to rely on these conversion functions rather than any other ones.
Discussion: https://postgr.es/m/41163.1559156593@sss.pgh.pa.us
