Instead of dozens of mostly-duplicate pg_foo_aclcheck() functions,
write one common function object_aclcheck() that can handle almost all
of them. We already have all the information we need, such as which
system catalog corresponds to which catalog table and which column is
the ACL column.
There are a few pg_foo_aclcheck() that don't work via the generic
function and have special APIs, so those stay as is.
I also changed most pg_foo_aclmask() functions to static functions,
since they are not used outside of aclchk.c.
Reviewed-by: Corey Huinker <corey.huinker@gmail.com>
Reviewed-by: Antonin Houska <ah@cybertec.at>
Discussion: https://www.postgresql.org/message-id/flat/95c30f96-4060-2f48-98b5-a4392d3b6066@enterprisedb.com
Instead of dozens of mostly-duplicate pg_foo_ownercheck() functions,
write one common function object_ownercheck() that can handle almost
all of them. We already have all the information we need, such as
which system catalog corresponds to which catalog table and which
column is the owner column.
Reviewed-by: Corey Huinker <corey.huinker@gmail.com>
Reviewed-by: Antonin Houska <ah@cybertec.at>
Discussion: https://www.postgresql.org/message-id/flat/95c30f96-4060-2f48-98b5-a4392d3b6066@enterprisedb.com
Test files should now ignore has_wal_read_bug() so long as
wait_for_catchup() is their only known way of reaching the bug. That's
at least five files today, a number expected to grow over time. This
commit removes skip logic from three. By doing so, systems having the
bug regain the ability to catch other kinds of defects via those three
tests. The other two, 002_databases.pl and 031_recovery_conflict.pl,
have been unprotected. Back-patch to v15, where done_testing() first
became our standard.
Discussion: https://postgr.es/m/20221030031639.GA3082137@rfd.leadboat.com
The planner simplifies boolean comparisons such as "x = true" and
"x = false" down to "x" and "NOT x" respectively, to have a canonical
form to ease comparisons. However, if we want to use an index on x,
the index AM APIs require us to reconstitute the comparison-operator
form of the indexqual. While that works, in bitmap indexscans the
canonical form of the qual was emitted as a "filter" condition
although it really only needs to be a "recheck" condition, because
create_bitmap_scan_plan didn't recognize the equivalence of that
form with the generated indexqual. booleq() is pretty cheap so that
likely doesn't make very much difference, but it's unsightly so
let's clean it up.
To fix, add a case to predicate_implied_by() to recognize the
equivalence of such clauses. This is a relatively low-cost place to
add a check, and perhaps it will have additional use cases in future.
Richard Guo and Tom Lane, per discussion of bug #17618 from Sindy
Senorita.
Discussion: https://postgr.es/m/17618-7a2240bfaa7e84ae@postgresql.org
When executing a utility statement, we must fetch everything
we need out of the PlannedStmt data structure before calling
standard_ProcessUtility. In certain cases (possibly only ROLLBACK
in extended query protocol), that data structure will get freed
during command execution. The situation is probably often harmless
in production builds, but in debug builds we intentionally overwrite
the freed memory with garbage, leading to picking up garbage values
of statement location and length, typically causing an assertion
failure later in pg_stat_statements. In non-debug builds, if
something did go wrong it would likely lead to storing garbage
for the query string.
Report and fix by zhaoqigui (with cosmetic adjustments by me).
It's an old problem, so back-patch to all supported versions.
Discussion: https://postgr.es/m/17663-a344fd0675f92128@postgresql.org
Discussion: https://postgr.es/m/1667307420050.56657@hundsun.com
This is similar to 7d25958, and this commit takes care of all the
remaining inconsistencies between the initial value used in the C
variable associated to a GUC and its default value stored in the GUC
tables (as of pg_settings.boot_val).
Some of the initial values of the GUCs updated rely on a compile-time
default. These are refactored so as the GUC table and its C declaration
use the same values. This makes everything consistent with other
places, backend_flush_after, bgwriter_flush_after, port,
checkpoint_flush_after doing so already, for example.
Extracted from a larger patch by Peter Smith. The spots updated in the
modules are from me.
Author: Peter Smith, Michael Paquier
Reviewed-by: Nathan Bossart, Tom Lane, Justin Pryzby
Discussion: https://postgr.es/m/CAHut+PtHE0XSfjjRQ6D4v7+dqzCw=d+1a64ujra4EX8aoc_Z+w@mail.gmail.com
When we decide we need to make a derived clause equating a.x and
b.y, we already will re-use a previously-made clause "a.x = b.y".
But we might instead have "b.y = a.x", which is perfectly usable
because equivclass.c has never promised anything about the
operand order in clauses it builds. Saving construction of a
new RestrictInfo doesn't matter all that much in itself --- but
because we cache selectivity estimates and so on per-RestrictInfo,
there's a possibility of saving a fair amount of duplicative
effort downstream.
Hence, check for commutative matches as well as direct ones when
seeing if we have a pre-existing clause. This changes the visible
clause order in several regression test cases, but they're all
clearly-insignificant changes.
Checking for the reverse operand order is simple enough, but
if we wanted to check for operator OID match we'd need to call
get_commutator here, which is not so cheap. I concluded that
we don't really need the operator check anyway, so I just
removed it. It's unlikely that an opfamily contains more than
one applicable operator for a given pair of operand datatypes;
and if it does they had better give the same answers, so there
seems little need to insist that we use exactly the one
select_equality_operator chose.
Using the current core regression suite as a test case, I see
this change reducing the number of new join clauses built by
create_join_clause from 9673 to 5142 (out of 26652 calls).
So not quite 50% savings, but pretty close to it.
Discussion: https://postgr.es/m/78062.1666735746@sss.pgh.pa.us
When the logical decoding restarts from NEW_CID, since there is no
association between the top transaction and its subtransaction, both are
created as top transactions and have the same LSN. This caused the
assertion failure in AssertTXNLsnOrder().
This patch skips the assertion check until we reach the LSN at which we
start decoding the contents of the transaction, specifically
start_decoding_at LSN in SnapBuild. This is okay because we don't
guarantee to make the association between top transaction and
subtransaction until we try to decode the actual contents of transaction.
The ordering of the records prior to the start_decoding_at LSN should have
been checked before the restart.
The other assertion failure is due to the reason that we forgot to track
that we have considered top-level transaction id in the list of catalog
changing transactions that were committed when one of its subtransactions
is marked as containing catalog change.
Reported-by: Tomas Vondra, Osumi Takamichi
Author: Masahiko Sawada, Kuroda Hayato
Reviewed-by: Amit Kapila, Dilip Kumar, Kuroda Hayato, Kyotaro Horiguchi, Masahiko Sawada
Backpatch-through: 10
Discussion: https://postgr.es/m/a89b46b6-0239-2fd5-71a9-b19b1f7a7145%40enterprisedb.com
Discussion: https://postgr.es/m/TYCPR01MB83733C6CEAE47D0280814D5AED7A9%40TYCPR01MB8373.jpnprd01.prod.outlook.com
Preprocessing of the HAVING clause will reduce havingQual to NIL
if the clause is constant-TRUE. This is one case where that
convention is rather unfortunate, because "HAVING TRUE" is not at all
the same as not having any HAVING clause at all. (Per the SQL spec,
it still forces the query to be grouped.) The planner deals with this
by having a boolean hasHavingQual that records whether havingQual was
originally nonempty; places that just want to check whether HAVING
was specified are supposed to consult that.
I found three places that got that wrong. Fortunately, these could
only affect cost estimates not correctness. It'd be hard even
to demonstrate the errors; for example, the one in allpaths.c would
only matter in a query that has HAVING TRUE but no GROUP BY and no
aggregates, which would require a completely variable-free SELECT
list, making the case probably of only academic interest. Hence,
while these are worth fixing before someone copies the incorrect
coding somewhere more critical, they don't seem worth back-patching.
I didn't bother trying to devise regression tests, either.
Discussion: https://postgr.es/m/2503888.1666042643@sss.pgh.pa.us
Per discussion, the existing routine name able to initialize a SRF
function with materialize mode is unpopular, so rename it. Equally, the
flags of this function are renamed, as of:
- SRF_SINGLE_USE_EXPECTED -> MAT_SRF_USE_EXPECTED_DESC
- SRF_SINGLE_BLESS -> MAT_SRF_BLESS
The previous function and flags introduced in 9e98583 are kept around
for compatibility purposes, so as any extension code already compiled
with v15 continues to work as-is. The declarations introduced here for
compatibility will be removed from HEAD in a follow-up commit.
The new names have been suggested by Andres Freund and Melanie
Plageman.
Discussion: https://postgr.es/m/20221013194820.ciktb2sbbpw7cljm@awork3.anarazel.de
Backpatch-through: 15
The file name used for its temporary destination, before renaming it to
the real deal, has been using a microseconds in a timestamp aimed to be
originally in milli-seconds. This is harmless as this is aimed at being
a safeguard against name collisions (note MyProcPid in the name), but
let's be correct with the maths.
While on it, add a note in the module's makefile to document why
installcheck is not supported.
Author: Nathan Bossart
Reviewed-by: Bharath Rupireddy
Discussion: https://postgr.es/m/20221014044106.GA1673343@nathanxps13
Backpatch-through: 15
While directly targetting a foreign table with MERGE was already
expressly forbidden, we failed to catch the case of a partitioned table
that has a foreign table as a partition; and the result if you try is an
incomprehensible error. Fix that by adding a specific check.
Backpatch to 15.
Reported-by: Tatsuhiro Nakamori <bt22nakamorit@oss.nttdata.com>
Discussion: https://postgr.es/m/bt22nakamorit@oss.nttdata.com
Most code prints PIDs as %d, but some code tried to print them as long
or unsigned long. While this is in theory allowed, the fact that PIDs
fit into int is deeply baked into all PostgreSQL code, so these random
deviations don't accomplish anything except confusion.
Note that we still need casts from pid_t to int, because on 64-bit
MinGW, pid_t is long long int. (But per above, actually supporting
that range in PostgreSQL code would be major surgery and probably not
useful.)
Discussion: https://www.postgresql.org/message-id/289c2e45-c7d9-5ce4-7eff-a9e2a33e1580@enterprisedb.com
This is a follow-up commit to ca7f8e2 which removed the allocation
abstraction from pgcrypto and replaced px_alloc + memset calls with
palloc0 calls. The particular memset in this commit was missed in
that work though.
Author: Zhihong Yu <zyu@yugabyte.com>
Reviewed-by: Bruce Momjian <bruce@momjian.us>
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Discussion: https://postgr.es/m/CALNJ-vT5qRucrFMPSzQyAWods1b4MnNPG-M=_ZUzh1SoTh0vNw@mail.gmail.com
Using pg_buffercache_summary() is significantly cheaper than querying
pg_buffercache and summarizing in SQL.
Author: Melih Mutlu <m.melihmutlu@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Reviewed-by: Zhang Mingli <zmlpostgres@gmail.com>
Discussion: https://postgr.es/m/CAGPVpCQAXYo54Q%3D8gqBsS%3Du0uk9qhnnq4%2B710BtUhUisX1XGEg%40mail.gmail.com
Commit 3d956d956 allowed the COPY, but it's done by inserting individual
rows to the foreign table, so it can be inefficient due to the overhead
caused by each round-trip to the foreign server. To improve performance
of the COPY in such a case, this patch allows batch insertion, by
extending the multi-insert machinery in CopyFrom() to the foreign-table
case so that we insert multiple rows to the foreign table at once using
the FDW callback routine added by commit b663a4136. This patch also
allows this for postgres_fdw. It is enabled by the "batch_size" option
added by commit b663a4136, which is disabled by default.
When doing batch insertion, we update progress of the COPY command after
performing the FDW callback routine, to count rows not suppressed by the
FDW as well as a BEFORE ROW INSERT trigger. For consistency, this patch
changes the timing of updating it for plain tables: previously, we
updated it immediately after adding each row to the multi-insert buffer,
but we do so only after writing the rows stored in the buffer out to the
table using table_multi_insert(), which I think would be consistent even
with non-batching mode, because in that mode we update it after writing
each row out to the table using table_tuple_insert().
Andrey Lepikhov, heavily revised by me, with review from Ian Barwick,
Andrey Lepikhov, and Zhihong Yu.
Discussion: https://postgr.es/m/bc489202-9855-7550-d64c-ad2d83c24867%40postgrespro.ru
Remove the Trap and TrapMacro macros, which were nearly unused
and confusingly had the opposite condition polarity from the
otherwise-functionally-equivalent Assert macros.
Having done that, it's very hard to justify carrying the errorType
argument of ExceptionalCondition, so drop that too, and just
let it assume everything's an Assert. This saves about 64K
of code space as of current HEAD.
Discussion: https://postgr.es/m/3928703.1665345117@sss.pgh.pa.us
Instead of Abs() for int64, use the C standard functions labs() or
llabs() as appropriate. Define a small wrapper around them that
matches our definition of int64. (labs() is C90, llabs() is C99.)
Reviewed-by: Zhang Mingli <zmlpostgres@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/4beb42b5-216b-bce8-d452-d924d5794c63%40enterprisedb.com
This substantially speeds up building for windows, due to the vast amount of
headers included via windows.h. A cross build from linux targetting mingw goes
from
994.11user 136.43system 0:31.58elapsed 3579%CPU
to
422.41user 89.05system 0:14.35elapsed 3562%CPU
The wins on windows are similar-ish (but I don't have a system at hand just
now for actual numbers). Targetting other operating systems the wins are far
smaller (tested linux, macOS, FreeBSD).
For now precompiled headers are disabled by default, it's not clear how well
they work on all platforms. E.g. on FreeBSD gcc doesn't seem to have working
support, but clang does.
When doing a full build precompiled headers are only beneficial for targets
with multiple .c files, as meson builds a separate precompiled header for each
target (so that different compilation options take effect). This commit
therefore only changes target with at least two .c files to use precompiled
headers.
Because this commit adds b_pch=false to the default_options new build
directories will have precompiled headers disabled by default, however
existing build directories will continue use the default value of b_pch, which
is true.
Note that using precompiled headers with ccache requires setting
CCACHE_SLOPPINESS=pch_defines,time_macros to get hits.
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/CA+hUKG+50eOUbN++ocDc0Qnp9Pvmou23DSXu=ZA6fepOcftKqA@mail.gmail.com
Discussion: https://postgr.es/m/c5736f70-bb6d-8d25-e35c-e3d886e4e905@enterprisedb.com
Discussion: https://postgr.es/m/20190826054000.GE7005%40paquier.xyz
The t_iseq() macro does not need to be guarded by a character
length check (at least when the comparison value is an ASCII
character, as its documentation requires). Some portions of
contrib/ltree hadn't read that memo, so simplify them.
The last change in gettoken_query,
- else if (charlen == 1 && !t_iseq(state->buf, ' '))
+ else if (!t_iseq(state->buf, ' '))
looks like it's actually a bug fix: I doubt that the intention
was to silently ignore multibyte characters as if they were
whitespace. I'm not tempted to back-patch though, because this
will have the effect of tightening what is allowed in ltxtquery
strings.
Discussion: https://postgr.es/m/2548310.1664999615@sss.pgh.pa.us
ts_locale.c omitted support for "isalnum" tests, perhaps on the
grounds that there were initially no use-cases for that. However,
both ltree and pg_trgm need such tests, and we do also have one
use-case now in the core backend. The workaround of testing
isalpha and isdigit separately seems quite inefficient, especially
when dealing with multibyte characters; so let's fill in the
missing support.
Discussion: https://postgr.es/m/2548310.1664999615@sss.pgh.pa.us
The generated resource files aren't exactly the same ones as the old
buildsystems generate. Previously "InternalName" and "OriginalFileName" were
mostly wrong / not set (despite being required), but that was hard to fix in
at least the make build. Additionally, the meson build falls back to a
"auto-generated" description when not set, and doesn't set it in a few cases -
unlikely that anybody looks at these descriptions in detail.
Author: Andres Freund <andres@anarazel.de>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
This reverts commit db0d67db24 and
several follow-on fixes. The idea of making a cost-based choice
of the order of the sorting columns is not fundamentally unsound,
but it requires cost information and data statistics that we don't
really have. For example, relying on procost to distinguish the
relative costs of different sort comparators is pretty pointless
so long as most such comparator functions are labeled with cost 1.0.
Moreover, estimating the number of comparisons done by Quicksort
requires more than just an estimate of the number of distinct values
in the input: you also need some idea of the sizes of the larger
groups, if you want an estimate that's good to better than a factor of
three or so. That's data that's often unknown or not very reliable.
Worse, to arrive at estimates of the number of calls made to the
lower-order-column comparison functions, the code needs to make
estimates of the numbers of distinct values of multiple columns,
which are necessarily even less trustworthy than per-column stats.
Even if all the inputs are perfectly reliable, the cost algorithm
as-implemented cannot offer useful information about how to order
sorting columns beyond the point at which the average group size
is estimated to drop to 1.
Close inspection of the code added by db0d67db2 shows that there
are also multiple small bugs. These could have been fixed, but
there's not much point if we don't trust the estimates to be
accurate in-principle.
Finally, the changes in cost_sort's behavior made for very large
changes (often a factor of 2 or so) in the cost estimates for all
sorting operations, not only those for multi-column GROUP BY.
That naturally changes plan choices in many situations, and there's
precious little evidence to show that the changes are for the better.
Given the above doubts about whether the new estimates are really
trustworthy, it's hard to summon much confidence that these changes
are better on the average.
Since we're hard up against the release deadline for v15, let's
revert these changes for now. We can always try again later.
Note: in v15, I left T_PathKeyInfo in place in nodes.h even though
it's unreferenced. Removing it would be an ABI break, and it seems
a bit late in the release cycle for that.
Discussion: https://postgr.es/m/TYAPR01MB586665EB5FB2C3807E893941F5579@TYAPR01MB5866.jpnprd01.prod.outlook.com
Commits cf112c12 and a0dc8271 were a little too hasty in getting rid of
the pg_ prefixes where we use pread(), pwrite() and vectored variants.
We dropped support for ancient Unixes where we needed to use lseek() to
implement replacements for those, but it turns out that Windows also
changes the current position even when you pass in an offset to
ReadFile() and WriteFile() if the file handle is synchronous, despite
its documentation saying otherwise.
Switching to asynchronous file handles would fix that, but have other
complications. For now let's just put back the pg_ prefix and add some
comments to highlight the non-standard side-effect, which we can now
describe as Windows-only.
Reported-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/20220923202439.GA1156054%40nathanxps13
There are still some alignment-related failures in the buildfarm,
which might or might not be able to be fixed quickly, but I've also
just realized that it increased the size of many WAL records by 4 bytes
because a block reference contains a RelFileLocator. The effect of that
hasn't been studied or discussed, so revert for now.
The previous macro implementations just cast the argument to a target
type but did not check whether the input type was appropriate. The
function implementation can do better type checking of the input type.
For the *GetDatumFast() macros, converting to an inline function
doesn't work in the !USE_FLOAT8_BYVAL case, but we can use
AssertVariableIsOfTypeMacro() to get a similar level of type checking.
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/8528fb7e-0aa2-6b54-85fb-0c0886dbd6ed%40enterprisedb.com
RelFileNumbers are now assigned using a separate counter, instead of
being assigned from the OID counter. This counter never wraps around:
if all 2^56 possible RelFileNumbers are used, an internal error
occurs. As the cluster is limited to 2^64 total bytes of WAL, this
limitation should not cause a problem in practice.
If the counter were 64 bits wide rather than 56 bits wide, we would
need to increase the width of the BufferTag, which might adversely
impact buffer lookup performance. Also, this lets us use bigint for
pg_class.relfilenode and other places where these values are exposed
at the SQL level without worrying about overflow.
This should remove the need to keep "tombstone" files around until
the next checkpoint when relations are removed. We do that to keep
RelFileNumbers from being recycled, but now that won't happen
anyway. However, this patch doesn't actually change anything in
this area; it just makes it possible for a future patch to do so.
Dilip Kumar, based on an idea from Andres Freund, who also reviewed
some earlier versions of the patch. Further review and some
wordsmithing by me. Also reviewed at various points by Ashutosh
Sharma, Vignesh C, Amul Sul, Álvaro Herrera, and Tom Lane.
Discussion: http://postgr.es/m/CA+Tgmobp7+7kmi4gkq7Y+4AM9fTvL+O1oQ4-5gFTT+6Ng-dQ=g@mail.gmail.com
We weren't jumbling the merge action list, so wildly different commands
would be considered to use the same query ID. Add that, mention it in
the docs, and some test lines.
Backpatch to 15.
Author: Tatsu <bt22nakamorit@oss.nttdata.com>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://postgr.es/m/d87e391694db75a038abc3b2597828e8@oss.nttdata.com
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in contrib code.
Like other recent commits that cleaned up function parameter names, this
commit was written with help from clang-tidy.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
Autoconf is showing its age, fewer and fewer contributors know how to wrangle
it. Recursive make has a lot of hard to resolve dependency issues and slow
incremental rebuilds. Our home-grown MSVC build system is hard to maintain for
developers not using Windows and runs tests serially. While these and other
issues could individually be addressed with incremental improvements, together
they seem best addressed by moving to a more modern build system.
After evaluating different build system choices, we chose to use meson, to a
good degree based on the adoption by other open source projects.
We decided that it's more realistic to commit a relatively early version of
the new build system and mature it in tree.
This commit adds an initial version of a meson based build system. It supports
building postgres on at least AIX, FreeBSD, Linux, macOS, NetBSD, OpenBSD,
Solaris and Windows (however only gcc is supported on aix, solaris). For
Windows/MSVC postgres can now be built with ninja (faster, particularly for
incremental builds) and msbuild (supporting the visual studio GUI, but
building slower).
Several aspects (e.g. Windows rc file generation, PGXS compatibility, LLVM
bitcode generation, documentation adjustments) are done in subsequent commits
requiring further review. Other aspects (e.g. not installing test-only
extensions) are not yet addressed.
When building on Windows with msbuild, builds are slower when using a visual
studio version older than 2019, because those versions do not support
MultiToolTask, required by meson for intra-target parallelism.
The plan is to remove the MSVC specific build system in src/tools/msvc soon
after reaching feature parity. However, we're not planning to remove the
autoconf/make build system in the near future. Likely we're going to keep at
least the parts required for PGXS to keep working around until all supported
versions build with meson.
Some initial help for postgres developers is at
https://wiki.postgresql.org/wiki/Meson
With contributions from Thomas Munro, John Naylor, Stone Tickle and others.
Author: Andres Freund <andres@anarazel.de>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Author: Peter Eisentraut <peter@eisentraut.org>
Reviewed-By: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20211012083721.hvixq4pnh2pixr3j@alap3.anarazel.de
The tlist of the EvalPlanQual outer plan for a ForeignScan node is
adjusted to produce a tuple whose descriptor matches the scan tuple slot
for the ForeignScan node. But in the case where the outer plan contains
an extra Sort node, if the new tlist contained columns required only for
evaluating PlaceHolderVars or columns required only for evaluating local
conditions, this would cause setrefs.c to fail with the error.
The cause of this is that when creating the outer plan by injecting the
Sort node into an alternative local join plan that could emit such extra
columns as well, we fail to arrange for the outer plan to propagate them
up through the Sort node, causing setrefs.c to fail to match up them in
the new tlist to what is available from the outer plan. Repair.
Per report from Alexander Pyhalov.
Richard Guo and Etsuro Fujita, reviewed by Alexander Pyhalov and Tom Lane.
Backpatch to all supported versions.
Discussion: http://postgr.es/m/cfb17bf6dfdf876467bd5ef533852d18%40postgrespro.ru
guc.c has grown to be one of our largest .c files, making it
a bottleneck for compilation. It's also acquired a bunch of
knowledge that'd be better kept elsewhere, because of our not
very good habit of putting variable-specific check hooks here.
Hence, split it up along these lines:
* guc.c itself retains just the core GUC housekeeping mechanisms.
* New file guc_funcs.c contains the SET/SHOW interfaces and some
SQL-accessible functions for GUC manipulation.
* New file guc_tables.c contains the data arrays that define the
built-in GUC variables, along with some already-exported constant
tables.
* GUC check/assign/show hook functions are moved to the variable's
home module, whenever that's clearly identifiable. A few hard-
to-classify hooks ended up in commands/variable.c, which was
already a home for miscellaneous GUC hook functions.
To avoid cluttering a lot more header files with #include "guc.h",
I also invented a new header file utils/guc_hooks.h and put all
the GUC hook functions' declarations there, regardless of their
originating module. That allowed removal of #include "guc.h"
from some existing headers. The fallout from that (hopefully
all caught here) demonstrates clearly why such inclusions are
best minimized: there are a lot of files that, for example,
were getting array.h at two or more levels of remove, despite
not having any connection at all to GUCs in themselves.
There is some very minor code beautification here, such as
renaming a couple of inconsistently-named hook functions
and improving some comments. But mostly this just moves
code from point A to point B and deals with the ensuing
needs for #include adjustments and exporting a few functions
that previously weren't exported.
Patch by me, per a suggestion from Andres Freund; thanks also
to Michael Paquier for the idea to invent guc_funcs.c.
Discussion: https://postgr.es/m/587607.1662836699@sss.pgh.pa.us
pgstattuple uses data type double for other percentage calculations
and exposes those values to the users via the float8 data type.
However, scanned_percent in struct output_type is of type uint64, even
though it is later returned via Float8GetDatum(). Change it to use
double to be inline with other percentages.
Author: Bharath Rupireddy
Reviewed-by: Peter Eisentraut
Discussion: https://www.postgresql.org/message-id/36ee692b-232f-0484-ce94-dc39d82021ad%40enterprisedb.com
pg_walinspect uses datatype double (double precision floating point
number) for WAL stats percentile calculations and expose them via
float4 (single precision floating point number), which an unnecessary
loss of precision and confusing. Even though, it's harmless that way,
let's use float8 (double precision floating-point number) to be in
sync with what pg_walinspect does internally and what it exposes to
the users. This seems to be the pattern used elsewhere in the code.
Reported-by: Peter Eisentraut
Author: Bharath Rupireddy
Reviewed-by: Peter Eisentraut
Discussion: https://www.postgresql.org/message-id/36ee692b-232f-0484-ce94-dc39d82021ad%40enterprisedb.com
When using the BSD UUID functions, contrib/uuid-ossp expects
uuid_create() to produce a version-1 UUID. FreeBSD still does so,
but in recent NetBSD releases that function produces a version-4
(random) UUID instead. That's not acceptable for our purposes:
if the user wanted v4 she would have asked for v4, not v1.
Hence, check the version digit and complain if it's not '1'.
Also drop the documentation's claim that the NetBSD implementation
is usable. It might be, depending on which OS version you're using,
but we're not going to get into that kind of detail.
(Maybe someday we should ditch all these external libraries
and just write our own UUID code, but today is not that day.)
Nazir Bilal Yavuz, with cosmetic adjustments and docs by me.
Backpatch to all supported versions.
Discussion: https://postgr.es/m/3848059.1661038772@sss.pgh.pa.us
Discussion: https://postgr.es/m/17358-89806e7420797025@postgresql.org
Since the retirement of some older buildfarm members, the oldest Bison
that gets regular testing is 2.3. MacOS ships that version, and will
continue doing so for the forseeable future because of Apple's policy
regarding GPLv3. While Mac users could use a package manager to install
a newer version, there is no compelling reason to force them do so at
this time.
Reviewed by Andres Freund
Discussion: https://www.postgresql.org/message-id/1097762.1662145681@sss.pgh.pa.us
Peter Eisentraut