In commit 9915de6c1cb2, we introduced a new wait point for replication
slots and incorrectly labelled it as wait event PG_WAIT_LOCK. That's
wrong, so invent an appropriate new wait event instead, and document it
properly.
While at it, fix numerous other problems in the vicinity:
- two different walreceiver wait events were being mixed up in a single
wait event (which wasn't documented either); split it out so that they
can be distinguished, and document the new events properly.
- ParallelBitmapPopulate was documented but didn't exist.
- ParallelBitmapScan was not documented (I think this should be called
"ParallelBitmapScanInit" instead.)
- Logical replication wait events weren't documented
- various symbols had been added in dartboard order in various places.
Put them in alphabetical order instead, as was originally intended.
Discussion: https://postgr.es/m/20170808181131.mu4fjepuh5m75cyq@alvherre.pgsql
Commit 3eefc51053f250837c3115c12f8119d16881a2d7 claimed to make
pg_user_mappings enforce the qualifications user_mapping_options had
been enforcing, but its removal of a longstanding restriction left them
distinct when the current user is the subject of a mapping yet has no
server privileges. user_mapping_options emits no rows for such a
mapping, but pg_user_mappings includes full umoptions. Change
pg_user_mappings to show null for umoptions. Back-patch to 9.2, like
the above commit.
Reviewed by Tom Lane. Reported by Jeff Janes.
Security: CVE-2017-7547
Some authentication methods allowed it, others did not. In the client-side,
libpq does not even try to authenticate with an empty password, which makes
using empty passwords hazardous: an administrator might think that an
account with an empty password cannot be used to log in, because psql
doesn't allow it, and not realize that a different client would in fact
allow it. To clear that confusion and to be be consistent, disallow empty
passwords in all authentication methods.
All the authentication methods that used plaintext authentication over the
wire, except for BSD authentication, already checked that the password
received from the user was not empty. To avoid forgetting it in the future
again, move the check to the recv_password_packet function. That only
forbids using an empty password with plaintext authentication, however.
MD5 and SCRAM need a different fix:
* In stable branches, check that the MD5 hash stored for the user does not
not correspond to an empty string. This adds some overhead to MD5
authentication, because the server needs to compute an extra MD5 hash, but
it is not noticeable in practice.
* In HEAD, modify CREATE and ALTER ROLE to clear the password if an empty
string, or a password hash that corresponds to an empty string, is
specified. The user-visible behavior is the same as in the stable branches,
the user cannot log in, but it seems better to stop the empty password from
entering the system in the first place. Secondly, it is fairly expensive to
check that a SCRAM hash doesn't correspond to an empty string, because
computing a SCRAM hash is much more expensive than an MD5 hash by design,
so better avoid doing that on every authentication.
We could clear the password on CREATE/ALTER ROLE also in stable branches,
but we would still need to check at authentication time, because even if we
prevent empty passwords from being stored in pg_authid, there might be
existing ones there already.
Reported by Jeroen van der Ham, Ben de Graaff and Jelte Fennema.
Security: CVE-2017-7546
Previously, it had no effect. Now, if archive_mode=always, it will
work, and if not, you'll get a warning.
Masahiko Sawada, Michael Paquier, and Robert Haas. The patch as
submitted also changed the behavior so that we would write and remove
history files on standbys, but that seems like material for a separate
patch to me.
Discussion: http://postgr.es/m/CAD21AoC2Xw6M=ZJyejq_9d_iDkReC_=rpvQRw5QsyzKQdfYpkw@mail.gmail.com
Supporting ICU 4.2 seems useful because it ships with CentOS 6.
Versions before ICU 4.6 don't support pkg-config, so document an
installation method without using pkg-config.
In ICU 4.2, ucol_getKeywordsForLocale() sometimes returns values that
will not be accepted by uloc_toLanguageTag(). Skip loading keyword
variants in that version.
Reported-by: Victor Wagner <vitus@wagner.pp.ru>
Per a report from AP, it's not that hard to exhaust the supply of
bitmap pages if you create a table with a hash index and then insert a
few billion rows - and then you start getting errors when you try to
insert additional rows. In the particular case reported by AP,
there's another fix that we can make to improve recycling of overflow
pages, which is another way to avoid the error, but there may be other
cases where this problem happens and that fix won't help. So let's
buy ourselves as much headroom as we can without rearchitecting
anything.
The comments claim that the old limit was 64GB, but it was really
only 32GB, because we didn't use all the bits in the page for bitmap
bits - only the largest power of 2 that could fit after deducting
space for the page header and so forth. Thus, we have 4kB per page
for bitmap bits, not 8kB. The new limit is thus actually 8 times the
old *real* limit but only 4 times the old *purported* limit.
Since this breaks on-disk compatibility, bump HASH_VERSION. We've
already done this earlier in this release cycle, so this doesn't cause
any incremental inconvenience for people using pg_upgrade from
releases prior to v10. However, users who use pg_upgrade to reach
10beta3 or later from 10beta2 or earlier will need to REINDEX any hash
indexes again.
Amit Kapila and Robert Haas
Discussion: http://postgr.es/m/20170704105728.mwb72jebfmok2nm2@zip.com.au
ALTER USER ... SET did not support all the syntax variants of ALTER ROLE
... SET. Fix that, and to avoid further deviations of this kind, unify
many the grammar rules for ROLE/USER/GROUP commands.
Reported-by: Pavel Golub <pavel@microolap.com>
FlightAware is still maintaining this, and indeed is seemingly being
more active with it than the pgtclng fork is. List both, for the
time being anyway.
In the back branches, also back-port commit e20f679f6 and other
recent updates to the client-interfaces list. I think these are
probably of current interest to users of back branches. I did
not touch the list of externally maintained PLs in the back
branches, though. Those are much more likely to be server version
sensitive, and I don't know which of these PLs work all the way back.
Discussion: https://postgr.es/m/20170730162612.1449.58796@wrigleys.postgresql.org
1024 bits is considered weak these days, but OpenSSL always passes 1024 as
the key length to the tmp_dh callback. All the code to handle other key
lengths is, in fact, dead.
To remedy those issues:
* Only include hard-coded 2048-bit parameters.
* Set the parameters directly with SSL_CTX_set_tmp_dh(), without the
callback
* The name of the file containing the DH parameters is now a GUC. This
replaces the old hardcoded "dh1024.pem" filename. (The files for other
key lengths, dh512.pem, dh2048.pem, etc. were never actually used.)
This is not a new problem, but it doesn't seem worth the risk and churn to
backport. If you care enough about the strength of the DH parameters on
old versions, you can create custom DH parameters, with as many bits as you
wish, and put them in the "dh1024.pem" file.
Per report by Nicolas Guini and Damian Quiroga. Reviewed by Michael Paquier.
Discussion: https://www.postgresql.org/message-id/CAMxBoUyjOOautVozN6ofzym828aNrDjuCcOTcCquxjwS-L2hGQ@mail.gmail.com
Previously the docs just said "5.8 or later". Experimentation shows
that while you can build on Unix from a git checkout with 5.8.0,
compiling recent PL/Perl requires at least 5.8.1, and you won't be
able to run the TAP tests with less than 5.8.3 because that's when
they added "prove". (I do not have any information on just what the
MSVC build scripts require.)
Since all these versions are quite ancient, let's not split hairs
in the docs, but just say that 5.8.3 is the minimum requirement.
Discussion: https://postgr.es/m/16894.1501392088@sss.pgh.pa.us
If the user modifies a view that has CHECK OPTIONs and this gets
translated into a modification to an underlying relation which happens
to be a foreign table, the check options should be enforced. In the
normal code path, that was happening properly, but it was not working
properly for "direct" modification because the whole operation gets
pushed to the remote side in that case and we never have an option to
enforce the constraint against individual tuples. Fix by disabling
direct modification when there is a need to enforce CHECK OPTIONs.
Etsuro Fujita, reviewed by Kyotaro Horiguchi and by me.
Discussion: http://postgr.es/m/f8a48f54-6f02-9c8a-5250-9791603171ee@lab.ntt.co.jp
The descriptions of PQserverVersion and PQlibVersion hadn't been updated
for the new two-part version-numbering approach. Fix that.
In passing, remove some trailing whitespace elsewhere in the file.
Previously, UNBOUNDED meant no lower bound when used in the FROM list,
and no upper bound when used in the TO list, which was OK for
single-column range partitioning, but problematic with multiple
columns. For example, an upper bound of (10.0, UNBOUNDED) would not be
collocated with a lower bound of (10.0, UNBOUNDED), thus making it
difficult or impossible to define contiguous multi-column range
partitions in some cases.
Fix this by using MINVALUE and MAXVALUE instead of UNBOUNDED to
represent a partition column that is unbounded below or above
respectively. This syntax removes any ambiguity, and ensures that if
one partition's lower bound equals another partition's upper bound,
then the partitions are contiguous.
Also drop the constraint prohibiting finite values after an unbounded
column, and just document the fact that any values after MINVALUE or
MAXVALUE are ignored. Previously it was necessary to repeat UNBOUNDED
multiple times, which was needlessly verbose.
Note: Forces a post-PG 10 beta2 initdb.
Report by Amul Sul, original patch by Amit Langote with some
additional hacking by me.
Discussion: https://postgr.es/m/CAAJ_b947mowpLdxL3jo3YLKngRjrq9+Ej4ymduQTfYR+8=YAYQ@mail.gmail.com
Claiming that NATURAL JOIN is equivalent to CROSS JOIN when there are
no common column names is only strictly correct if it's an inner join;
you can't say e.g. CROSS LEFT JOIN. Better to explain it as meaning
JOIN ON TRUE, instead. Per a suggestion from David Johnston.
Discussion: https://postgr.es/m/CAKFQuwb+mYszQhDS9f_dqRrk1=Pe-S6D=XMkAXcDf4ykKPmgKQ@mail.gmail.com
Also fix two other issues, while we're at it:
* In error message on connection failure, if multiple network addresses
were given as the host option, as in "host=127.0.0.1,127.0.0.2", the
error message printed the address twice.
* If there were many more ports than hostnames, the error message would
always claim that there was one port too many, even if there was more than
one. For example, if you gave 2 hostnames and 5 ports, the error message
claimed that you gave 2 hostnames and 3 ports.
Discussion: https://www.postgresql.org/message-id/10badbc6-4d5a-a769-623a-f7ada43e14dd@iki.fi
Commit e9c81b601 changed this, but missed updating the documentation.
The adjacent claim that we use TAP tests only in src/bin seems pretty
obsolete as well. Minor other copy-editing.
Original wording had confusingly vague antecedent for "they", so replace
that with a more repetitive but clearer formulation. In passing, make the
link to the installation requirements section more specific. Per gripe
from Martin Mai, though this is not the fix he initially proposed.
Discussion: https://postgr.es/m/CAN_NWRu-cWuNaiXUjV3m4H-riWURuPW=j21bSaLADs6rjjzXgQ@mail.gmail.com
If an operation being waited for does not complete within the timeout,
then exit with a nonzero exit status. This was previously handled
inconsistently.
Update the documentation for \pset to mention
columns|linestyle|pager_min_lines. Add various mentions of \pset
command equivalences that were previously inconsistent.
Author: Дилян Палаузов <dpa-postgres@aegee.org>
Update the documentation a bit to include that logical replication as
well as other and third-party replication clients can participate in
synchronous replication.
Buildfarm evidence shows that TCP_KEEPALIVE_THRESHOLD doesn't exist
after all on Solaris < 11. This means we need to take positive action to
prevent the TCP_KEEPALIVE code path from being taken on that platform.
I've chosen to limit it with "&& defined(__darwin__)", since it's unclear
that anyone else would follow Apple's precedent of spelling the symbol
that way.
Also, follow a suggestion from Michael Paquier of eliminating code
duplication by defining a couple of intermediate symbols for the
socket option.
In passing, make some effort to reduce the number of translatable messages
by replacing "setsockopt(foo) failed" with "setsockopt(%s) failed", etc,
throughout the affected files. And update relevant documentation so
that it doesn't claim to provide an exhaustive list of the possible
socket option names.
Like the previous commit (f0256c774), back-patch to all supported branches.
Discussion: https://postgr.es/m/20170627163757.25161.528@wrigleys.postgresql.org
pg_import_system_collations() refused to create any ICU collations if
the current database's encoding didn't support ICU. This is wrongheaded:
initdb must initialize pg_collation in an encoding-independent way
since it might be used in other databases with different encodings.
The reason for the restriction seems to be that get_icu_locale_comment()
used icu_from_uchar() to convert the UChar-format display name, and that
unsurprisingly doesn't know what to do in unsupported encodings.
But by the same token that the initial catalog contents must be
encoding-independent, we can't allow non-ASCII characters in the comment
strings. So we don't really need icu_from_uchar() here: just check for
Unicode codes outside the ASCII range, and if there are none, the format
conversion is trivial. If there are some, we can simply not install the
comment. (In my testing, this affects only Norwegian Bokmål, which has
given us trouble before.)
For paranoia's sake, also check for non-ASCII characters in ICU locale
names, and skip such locales, as we do for libc locales. I don't
currently have a reason to believe that this will ever reject anything,
but then again the libc maintainers should have known better too.
With just the import changes, ICU collations can be found in pg_collation
in databases with unsupported encodings. This resulted in more or less
clean failures at runtime, but that's not how things act for unsupported
encodings with libc collations. Make it work the same as our traditional
behavior for libc collations by having collation lookup take into account
whether is_encoding_supported_by_icu().
Adjust documentation to match. Also, expand Table 23.1 to show which
encodings are supported by ICU.
catversion bump because of likely change in pg_collation/pg_description
initial contents in ICU-enabled builds.
Discussion: https://postgr.es/m/20c74bc3-d6ca-243d-1bbc-12f17fa4fe9a@gmail.com
The comparison with the target rows on the subscriber side was done with
datumIsEqual(), which can have false negatives. For instance, it didn't
work reliably for text columns. So use the equality operator provided
by the type cache instead.
Also add more user documentation about replica identity requirements.
Reported-by: Tatsuo Ishii <ishii@sraoss.co.jp>
Marco Atzeri reported that initdb would fail if "locale -a" reported
the same locale name more than once. All previous versions of Postgres
implicitly de-duplicated the results of "locale -a", but the rewrite
to move the collation import logic into C had lost that property.
It had also lost the property that locale names matching built-in
collation names were silently ignored.
The simplest way to fix this is to make initdb run the function in
if-not-exists mode, which means that there's no real use-case for
non if-not-exists mode; we might as well just drop the boolean argument
and simplify the function's definition to be "add any collations not
already known". This change also gets rid of some odd corner cases
caused by the fact that aliases were added in if-not-exists mode even
if the function argument said otherwise.
While at it, adjust the behavior so that pg_import_system_collations()
doesn't spew "collation foo already exists, skipping" messages during a
re-run; that's completely unhelpful, especially since there are often
hundreds of them. And make it return a count of the number of collations
it did add, which seems like it might be helpful.
Also, re-integrate the previous coding's property that it would make a
deterministic selection of which alias to use if there were conflicting
possibilities. This would only come into play if "locale -a" reports
multiple equivalent locale names, say "de_DE.utf8" and "de_DE.UTF-8",
but that hardly seems out of the question.
In passing, fix incorrect behavior in pg_import_system_collations()'s
ICU code path: it neglected CommandCounterIncrement, which would result
in failures if ICU returns duplicate names, and it would try to create
comments even if a new collation hadn't been created.
Also, reorder operations in initdb so that the 'ucs_basic' collation
is created before calling pg_import_system_collations() not after.
This prevents a failure if "locale -a" were to report a locale named
that. There's no reason to think that that ever happens in the wild,
but the old coding would have survived it, so let's be equally robust.
Discussion: https://postgr.es/m/20c74bc3-d6ca-243d-1bbc-12f17fa4fe9a@gmail.com
Startup process is displayed in pg_stat_activity, noted by Yugo Nagata.
Transactions can be resolved at end of recovery.
Author: Yugo Nagata, with addition by me
When materialized views were added, psql's \d commands were made to
treat them as a separate object category ... but not everyplace in the
documentation or comments got the memo.
Noted by David Johnston. Back-patch to 9.3 where matviews came in.
Discussion: https://postgr.es/m/CAKFQuwb27M3VXRhHErjCpkWwN9eKThbqWb1=trtoXi9_ejqPXQ@mail.gmail.com
