spell checker run

doc/src/sgml/backup.sgml

@@ -1,4 +1,4 @@
-<!-- $PostgreSQL: pgsql/doc/src/sgml/backup.sgml,v 2.107 2007/10/16 19:44:18 momjian Exp $ -->
+<!-- $PostgreSQL: pgsql/doc/src/sgml/backup.sgml,v 2.108 2007/11/28 15:42:30 petere Exp $ -->
 
 <chapter id="backup">
  <title>Backup and Restore</title>
@@ -1034,7 +1034,7 @@ restore_command = 'cp /mnt/server/archivedir/%f %p'
         (The path name is relative to the working directory of the server,
         i.e., the cluster's data directory.)
         Any <literal>%r</> is replaced by the name of the file containing the
-        last valid restartpoint. That is the earliest file that must be kept
+        last valid restart point. That is the earliest file that must be kept
         to allow a restore to be restartable, so this information can be used
         to truncate the archive to just the minimum required to support
         restart of the current restore. <literal>%r</> would only be used in a
@@ -1479,7 +1479,7 @@ if (!triggered)
    <para>
     The size of the WAL archive can be minimized by using the <literal>%r</>
     option of the <varname>restore_command</>. This option specifies the
-    last archive filename that needs to be kept to allow the recovery to
+    last archive file name that needs to be kept to allow the recovery to
     restart correctly. This can be used to truncate the archive once
     files are no longer required, if the archive is writable from the
     standby server.

doc/src/sgml/config.sgml

@@ -1,4 +1,4 @@
-<!-- $PostgreSQL: pgsql/doc/src/sgml/config.sgml,v 1.157 2007/11/28 05:01:24 momjian Exp $ -->
+<!-- $PostgreSQL: pgsql/doc/src/sgml/config.sgml,v 1.158 2007/11/28 15:42:30 petere Exp $ -->
 
 <chapter Id="runtime-config">
   <title>Server Configuration</title>
@@ -608,7 +608,7 @@ SET ENABLE_SEQSCAN TO OFF;
       </indexterm>
       <listitem>
        <para>
-        Sets the realm to match Kerberos, GSSAPI and SSPI usernames against.
+        Sets the realm to match Kerberos, GSSAPI and SSPI user names against.
         See <xref linkend="kerberos-auth">, <xref linkend="gssapi-auth"> or
         <xref linkend="sspi-auth"> for details. This parameter can only be
         set at server start.
@@ -3166,12 +3166,11 @@ local0.*    /var/log/postgresql
         Including <literal>csvlog</> in the <varname>log_destination</> list 
         provides a convenient way to import log files into a database table. 
         This option emits log lines in comma-separated-value format,
-        with these columns: timestamp with milliseconds, username, database
+        with these columns: timestamp with milliseconds, user name, database
-        name, session id, host:port number, process id, per-process line
+        name, session ID, host:port number, process ID, per-process line
-        number, command tag, session start time, virtual transaction id,
+        number, command tag, session start time, virtual transaction ID,
         regular transaction id, error severity, SQL state code, error message.
         Here is a sample table definition for storing CSV-format log output:
-       </para>
 
 <programlisting>
 CREATE TABLE postgres_log
@@ -3193,15 +3192,16 @@ CREATE TABLE postgres_log
   PRIMARY KEY (session_id, process_line_num)
 );
 </programlisting>
+       </para>
 
        <para>
         To import a log file into this table, use the <command>COPY FROM</>
         command:
-       </para>
 
 <programlisting>
 COPY postgres_log FROM '/full/path/to/logfile.csv' WITH csv;
 </programlisting>
+       </para>
 
        <para>
        There are a few things you need to do to simplify importing CSV log
@@ -3221,7 +3221,7 @@ COPY postgres_log FROM '/full/path/to/logfile.csv' WITH csv;
         <listitem>
            <para>
             Set <varname>log_rotation_size</varname> to 0 to disable 
-            size-based log rotation, as it makes the log filename difficult 
+            size-based log rotation, as it makes the log file name difficult 
             to predict. 
            </para>
         </listitem>

doc/src/sgml/ddl.sgml

@@ -1,4 +1,4 @@
-<!-- $PostgreSQL: pgsql/doc/src/sgml/ddl.sgml,v 1.76 2007/06/20 23:11:38 tgl Exp $ -->
+<!-- $PostgreSQL: pgsql/doc/src/sgml/ddl.sgml,v 1.77 2007/11/28 15:42:31 petere Exp $ -->
 
 <chapter id="ddl">
  <title>Data Definition</title>
@@ -2793,7 +2793,7 @@ EXPLAIN SELECT count(*) FROM measurement WHERE logdate &gt;= DATE '2006-01-01';
       range tests for range partitioning, as illustrated in the preceding
       examples.  A good rule of thumb is that partitioning constraints should
       contain only comparisons of the partitioning column(s) to constants
-      using btree-indexable operators.
+      using B-tree-indexable operators.
      </para>
     </listitem>
 

doc/src/sgml/func.sgml

@@ -1,4 +1,4 @@
-<!-- $PostgreSQL: pgsql/doc/src/sgml/func.sgml,v 1.413 2007/11/28 05:13:41 momjian Exp $ -->
+<!-- $PostgreSQL: pgsql/doc/src/sgml/func.sgml,v 1.414 2007/11/28 15:42:31 petere Exp $ -->
 
  <chapter id="functions">
   <title>Functions and Operators</title>
@@ -1313,7 +1313,7 @@
        <entry>
         <acronym>ASCII</acronym> code of the first character of the
         argument.  For <acronym>UTF8</acronym> returns the Unicode code
-        point of the character.  For other multi-byte encodings. the
+        point of the character.  For other multibyte encodings. the
         argument must be a strictly <acronym>ASCII</acronym> character.
        </entry>
        <entry><literal>ascii('x')</literal></entry>
@@ -1338,7 +1338,7 @@
        <entry><type>text</type></entry>
        <entry>
         Character with the given code. For <acronym>UTF8</acronym> the
-        argument is treated as a Unicode code point. For other multi-byte
+        argument is treated as a Unicode code point. For other multibyte
         encodings the argument must designate a strictly
         <acronym>ASCII</acronym> character.
        </entry>
@@ -1359,7 +1359,7 @@
         <parameter>src_encoding</parameter>. The
         <parameter>string</parameter> must be valid in this encoding.
         Conversions can be defined by <command>CREATE CONVERSION</command>.  
-        Also there are some pre-defined conversions. See <xref
+        Also there are some predefined conversions. See <xref
         linkend="conversion-names"> for available conversions.
        </entry>
        <entry><literal>convert('text_in_utf8', 'UTF8', 'LATIN1')</literal></entry>
@@ -6823,7 +6823,7 @@ CREATE TYPE rainbow AS ENUM ('red', 'orange', 'yellow', 'green', 'blue', 'purple
    <para>
     Notice that except for the two-argument form of <function>enum_range</>,
     these functions disregard the specific value passed to them; they care
-    only about its declared datatype.  Either NULL or a specific value of
+    only about its declared data type.  Either null or a specific value of
     the type can be passed, with the same result.  It is more common to
     apply these functions to a table column or function argument than to
     a hardwired type name as suggested by the examples.
@@ -8381,7 +8381,7 @@ cursor_to_xml(cursor refcursor, count int, nulls boolean, tableforest boolean, t
 ...
 ]]></screen>
 
-    If no table name is avaible, that is, when mapping a query or a
+    If no table name is available, that is, when mapping a query or a
     cursor, the string <literal>table</literal> is used in the first
     format, <literal>row</literal> in the second format.
    </para>

doc/src/sgml/high-availability.sgml

@@ -1,4 +1,4 @@
-<!-- $PostgreSQL: pgsql/doc/src/sgml/high-availability.sgml,v 1.28 2007/11/28 10:10:14 petere Exp $ -->
+<!-- $PostgreSQL: pgsql/doc/src/sgml/high-availability.sgml,v 1.29 2007/11/28 15:42:31 petere Exp $ -->
 
 <chapter id="high-availability">
  <title>High Availability, Load Balancing, and Replication</title>
@@ -66,7 +66,7 @@
 
  <para>
   Performance must be considered in any choice.  There is usually a
-  tradeoff between functionality and
+  trade-off between functionality and
   performance.  For example, a full synchronous solution over a slow
   network might cut performance by more than half, while an asynchronous
   one might have a minimal performance impact.
@@ -202,13 +202,13 @@ protocol to make nodes agree on a serializable transactional order.
   </varlistentry>
 
   <varlistentry>
-   <term>Asynchronous Multi-Master Replication</term>
+   <term>Asynchronous Multimaster Replication</term>
    <listitem>
 
     <para>
      For servers that are not regularly connected, like laptops or
      remote servers, keeping data consistent among servers is a
-     challenge.  Using asynchronous multi-master replication, each
+     challenge.  Using asynchronous multimaster replication, each
      server works independently, and periodically communicates with
      the other servers to identify conflicting transactions.  The
      conflicts can be resolved by users or conflict resolution rules.
@@ -217,18 +217,18 @@ protocol to make nodes agree on a serializable transactional order.
   </varlistentry>
 
   <varlistentry>
-   <term>Synchronous Multi-Master Replication</term>
+   <term>Synchronous Multimaster Replication</term>
    <listitem>
 
     <para>
-     In synchronous multi-master replication, each server can accept
+     In synchronous multimaster replication, each server can accept
      write requests, and modified data is transmitted from the
      original server to every other server before each transaction
      commits.  Heavy write activity can cause excessive locking,
      leading to poor performance.  In fact, write performance is
      often worse than that of a single server.  Read requests can
      be sent to any server.  Some implementations use shared disk
-     to reduce the communication overhead.  Synchronous multi-master
+     to reduce the communication overhead.  Synchronous multimaster
      replication is best for mostly read workloads, though its big
      advantage is that any server can accept write requests &mdash;
      there is no need to partition workloads between master and
@@ -279,8 +279,8 @@ protocol to make nodes agree on a serializable transactional order.
      <entry>Warm Standby Using PITR</entry>
      <entry>Master-Slave Replication</entry>
      <entry>Statement-Based Replication Middleware</entry>
-     <entry>Asynchronous Multi-Master Replication</entry>
+     <entry>Asynchronous Multimaster Replication</entry>
-     <entry>Synchronous Multi-Master Replication</entry>
+     <entry>Synchronous Multimaster Replication</entry>
     </row>
    </thead>
 
@@ -401,7 +401,7 @@ protocol to make nodes agree on a serializable transactional order.
   </varlistentry>
 
   <varlistentry>
-   <term>Multi-Server Parallel Query Execution</term>
+   <term>Multiple-Server Parallel Query Execution</term>
    <listitem>
 
     <para>

doc/src/sgml/install-win32.sgml

@@ -1,4 +1,4 @@
-<!-- $PostgreSQL: pgsql/doc/src/sgml/install-win32.sgml,v 1.41 2007/08/03 10:47:10 mha Exp $ -->
+<!-- $PostgreSQL: pgsql/doc/src/sgml/install-win32.sgml,v 1.42 2007/11/28 15:42:31 petere Exp $ -->
 
 <chapter id="install-win32">
  <title>Installation on <productname>Windows</productname></title>
@@ -82,7 +82,7 @@
      <term><productname>ActiveState Perl</productname></term>
      <listitem><para>
       ActiveState Perl is required to run the build generation scripts. MinGW
-      or Cygwin perl will not work. It must also be present in the PATH.
+      or Cygwin Perl will not work. It must also be present in the PATH.
       Binaries can be downloaded from
       <ulink url="http://www.activestate.com"></>.
      </para></listitem>
@@ -209,7 +209,7 @@
     </userinput>
    </screen>
    To change the default build configuration to debug, put the following
-   in the buildenv.bat file:
+   in the <filename>buildenv.bat</filename> file:
    <screen>
     <userinput>
      set CONFIG=Debug
@@ -261,8 +261,8 @@
   <para>
    To run the regression tests, make sure you have completed the build of all
    required parts first. Also, make sure that the DLLs required to load all
-   parts of the system (such as the perl and python DLLs for the procedural
+   parts of the system (such as the Perl and Python DLLs for the procedural
-   languages) are present in the system PATH. If they are not, set it through
+   languages) are present in the system path. If they are not, set it through
    the <filename>buildenv.bat</filename> file. To run the tests, run one of
    the following commands from the <filename>src\tools\msvc</filename>
    directory:
@@ -282,7 +282,7 @@
    </screen>
 
    To change the schedule used (default is the parallel), append it to the
-   commandline like:
+   command line like:
    <screen>
     <userinput>
      vcregress check serial
@@ -321,7 +321,7 @@
     </varlistentry>
 
     <varlistentry>
-     <term>DocBook DSSL 1.79</term>
+     <term>DocBook DSSSL 1.79</term>
      <listitem><para>
       Download from
       <ulink url="http://sourceforge.net/project/downloading.php?groupname=docbook&amp;filename=docbook-dsssl-1.79.zip"></>

doc/src/sgml/installation.sgml

@@ -1,4 +1,4 @@
-<!-- $PostgreSQL: pgsql/doc/src/sgml/installation.sgml,v 1.297 2007/11/05 17:43:20 momjian Exp $ -->
+<!-- $PostgreSQL: pgsql/doc/src/sgml/installation.sgml,v 1.298 2007/11/28 15:42:31 petere Exp $ -->
 
 <chapter id="installation">
  <title><![%standalone-include[<productname>PostgreSQL</>]]>
@@ -1308,7 +1308,7 @@ su - postgres
        <term><envar>TCLSH</envar></term>
        <listitem>
         <para>
-         Full path to the Tcl interpreter.  This wil be used to
+         Full path to the Tcl interpreter.  This will be used to
          determine the dependencies for building PL/Tcl.
         </para>
        </listitem>

doc/src/sgml/libpq.sgml

@@ -1,4 +1,4 @@
-<!-- $PostgreSQL: pgsql/doc/src/sgml/libpq.sgml,v 1.246 2007/09/26 08:45:50 momjian Exp $ -->
+<!-- $PostgreSQL: pgsql/doc/src/sgml/libpq.sgml,v 1.247 2007/11/28 15:42:31 petere Exp $ -->
 
 <chapter id="libpq">
  <title><application>libpq</application> - C Library</title>
@@ -4976,7 +4976,7 @@ defaultNoticeProcessor(void *arg, const char *message)
    used.  (Therefore, put more-specific entries first when you are using
    wildcards.) If an entry needs to contain <literal>:</literal> or
    <literal>\</literal>, escape this character with <literal>\</literal>.
-   A host name of <literal>localhost</> matches both TCP (hostname
+   A host name of <literal>localhost</> matches both TCP (host name
    <literal>localhost</>) and Unix domain socket (<literal>pghost</> empty
    or the default socket directory) connections coming from the local
    machine.

doc/src/sgml/maintenance.sgml

@@ -1,4 +1,4 @@
-<!-- $PostgreSQL: pgsql/doc/src/sgml/maintenance.sgml,v 1.84 2007/10/07 01:16:42 alvherre Exp $ -->
+<!-- $PostgreSQL: pgsql/doc/src/sgml/maintenance.sgml,v 1.85 2007/11/28 15:42:31 petere Exp $ -->
 
 <chapter id="maintenance">
  <title>Routine Database Maintenance Tasks</title>
@@ -115,7 +115,7 @@
     <command>UPDATE</> or <command>DELETE</> of a row does not
     immediately remove the old version of the row.
     This approach is necessary to gain the benefits of multiversion
-    concurrency control (see <xref linkend="mvcc">): the row version
+    concurrency control (see <xref linkend="mvcc">): the row versions
     must not be deleted while it is still potentially visible to other
     transactions. But eventually, an outdated or deleted row version is no
     longer of interest to any transaction. The space it occupies must be
@@ -486,7 +486,7 @@ HINT:  Stop the postmaster and use a standalone backend to VACUUM in "mydb".
 
    <para>
     Beginning in <productname>PostgreSQL</productname> 8.3, autovacuum has a
-    multi-process architecture: there is a daemon process, called the
+    multiprocess architecture:  There is a daemon process, called the
     <firstterm>autovacuum launcher</firstterm>, which is in charge of starting
     an <firstterm>autovacuum worker</firstterm> process on each database every
     <xref linkend="guc-autovacuum-naptime"> seconds. On each run, the worker

doc/src/sgml/monitoring.sgml

@@ -1,4 +1,4 @@
-<!-- $PostgreSQL: pgsql/doc/src/sgml/monitoring.sgml,v 1.54 2007/09/25 20:03:37 tgl Exp $ -->
+<!-- $PostgreSQL: pgsql/doc/src/sgml/monitoring.sgml,v 1.55 2007/11/28 15:42:31 petere Exp $ -->
 
 <chapter id="monitoring">
  <title>Monitoring Database Activity</title>
@@ -236,7 +236,7 @@ postgres: <replaceable>user</> <replaceable>database</> <replaceable>host</> <re
       <entry>One row only, showing cluster-wide statistics from the
       background writer: number of scheduled checkpoints, requested
       checkpoints, buffers written by checkpoints and cleaning scans,
-      and the number of times the bgwriter stopped a cleaning scan
+      and the number of times the background writer stopped a cleaning scan
       because it had written too many buffers.  Also includes
       statistics about the shared buffer pool, including buffers written
       by backends (that is, not by the background writer) and total buffers
@@ -777,7 +777,7 @@ postgres: <replaceable>user</> <replaceable>database</> <replaceable>host</> <re
       <entry><literal><function>pg_stat_get_bgwriter_timed_checkpoints</function>()</literal></entry>
        <entry><type>bigint</type></entry>
        <entry>
-        The number of times the bgwriter has started timed checkpoints
+        The number of times the background writer has started timed checkpoints
         (because the <varname>checkpoint_timeout</varname> time has expired)
        </entry>
      </row>
@@ -786,7 +786,7 @@ postgres: <replaceable>user</> <replaceable>database</> <replaceable>host</> <re
       <entry><literal><function>pg_stat_get_bgwriter_requested_checkpoints</function>()</literal></entry>
       <entry><type>bigint</type></entry>
       <entry>
-       The number of times the bgwriter has started checkpoints based
+       The number of times the background writer has started checkpoints based
        on requests from backends because the <varname>checkpoint_segments</varname>
        has been exceeded or because the <command>CHECKPOINT</command>
        command has been issued
@@ -797,7 +797,7 @@ postgres: <replaceable>user</> <replaceable>database</> <replaceable>host</> <re
       <entry><literal><function>pg_stat_get_bgwriter_buf_written_checkpoints</function>()</literal></entry>
       <entry><type>bigint</type></entry>
       <entry>
-       The number of buffers written by the bgwriter during checkpoints
+       The number of buffers written by the background writer during checkpoints
       </entry>
      </row>
 
@@ -805,7 +805,7 @@ postgres: <replaceable>user</> <replaceable>database</> <replaceable>host</> <re
       <entry><literal><function>pg_stat_get_bgwriter_buf_written_clean</function>()</literal></entry>
       <entry><type>bigint</type></entry>
       <entry>
-       The number of buffers written by the bgwriter for routine cleaning of
+       The number of buffers written by the background writer for routine cleaning of
        dirty pages
       </entry>
      </row>
@@ -814,7 +814,7 @@ postgres: <replaceable>user</> <replaceable>database</> <replaceable>host</> <re
       <entry><literal><function>pg_stat_get_bgwriter_maxwritten_clean</function>()</literal></entry>
       <entry><type>bigint</type></entry>
       <entry>
-       The number of times the bgwriter has stopped its cleaning scan because
+       The number of times the background writer has stopped its cleaning scan because
        it has written more buffers than specified in the
        <varname>bgwriter_lru_maxpages</varname> parameter
       </entry>
@@ -1180,7 +1180,7 @@ provider postgresql {
 
   <para>
    You should take care that the data types specified for the probe arguments
-   match the datatypes of the variables used in the <literal>PG_TRACE</>
+   match the data types of the variables used in the <literal>PG_TRACE</>
    macro. This is not checked at compile time. You can check that your newly
    added trace point is available by recompiling, then running the new binary,
    and as root, executing a DTrace command such as:

doc/src/sgml/perform.sgml

@@ -1,4 +1,4 @@
-<!-- $PostgreSQL: pgsql/doc/src/sgml/perform.sgml,v 1.66 2007/10/22 21:34:33 tgl Exp $ -->
+<!-- $PostgreSQL: pgsql/doc/src/sgml/perform.sgml,v 1.67 2007/11/28 15:42:31 petere Exp $ -->
 
  <chapter id="performance-tips">
   <title>Performance Tips</title>
@@ -738,10 +738,10 @@ SELECT * FROM x, y, a, b, c WHERE something AND somethingelse;
    <xref linkend="guc-from-collapse-limit"> and <xref
    linkend="guc-join-collapse-limit">
    are similarly named because they do almost the same thing: one controls
-   when the planner will <quote>flatten out</> subselects, and the
+   when the planner will <quote>flatten out</> subqueries, and the
    other controls when it will flatten out explicit joins.  Typically
    you would either set <varname>join_collapse_limit</> equal to
-   <varname>from_collapse_limit</> (so that explicit joins and subselects
+   <varname>from_collapse_limit</> (so that explicit joins and subqueries
    act similarly) or set <varname>join_collapse_limit</> to 1 (if you want
    to control join order with explicit joins).  But you might set them
    differently if you are trying to fine-tune the trade-off between planning

doc/src/sgml/plpgsql.sgml

@@ -1,4 +1,4 @@
-<!-- $PostgreSQL: pgsql/doc/src/sgml/plpgsql.sgml,v 1.117 2007/10/26 01:11:09 momjian Exp $ -->
+<!-- $PostgreSQL: pgsql/doc/src/sgml/plpgsql.sgml,v 1.118 2007/11/28 15:42:31 petere Exp $ -->
 
 <chapter id="plpgsql"> 
   <title><application>PL/pgSQL</application> - <acronym>SQL</acronym> Procedural Language</title>
@@ -3348,7 +3348,7 @@ SELECT * INTO myrec FROM dictionary WHERE word LIKE search_term;
     where <literal>search_term</> is a <application>PL/pgSQL</application>
     variable.  The cached plan for this query will never use an index on
     <structfield>word</>, since the planner cannot assume that the
-    <literal>LIKE</> pattern will be left-anchored at runtime.  To use
+    <literal>LIKE</> pattern will be left-anchored at run time.  To use
     an index the query must be planned with a specific constant
     <literal>LIKE</> pattern provided.  This is another situation where
     <command>EXECUTE</command> can be used to force a new plan to be

doc/src/sgml/ref/alter_table.sgml

@@ -1,5 +1,5 @@
 <!--
-$PostgreSQL: pgsql/doc/src/sgml/ref/alter_table.sgml,v 1.97 2007/05/17 23:36:04 neilc Exp $
+$PostgreSQL: pgsql/doc/src/sgml/ref/alter_table.sgml,v 1.98 2007/11/28 15:42:31 petere Exp $
 PostgreSQL documentation
 -->
 
@@ -214,7 +214,7 @@ where <replaceable class="PARAMETER">action</replaceable> is one of:
       of course the integrity of the constraint cannot be guaranteed if the
       triggers are not executed.
       The trigger firing mechanism is also affected by the configuration
-      variable <xref linkend="guc-session-replication-role">. Simply ENABLEd
+      variable <xref linkend="guc-session-replication-role">. Simply enabled
       triggers will fire when the replication role is <quote>origin</>
       (the default) or <quote>local</>. Triggers configured <literal>ENABLE REPLICA</literal>
       will only fire if the session is in <quote>replica</> mode and triggers 

doc/src/sgml/ref/create_operator.sgml

@@ -1,5 +1,5 @@
 <!--
-$PostgreSQL: pgsql/doc/src/sgml/ref/create_operator.sgml,v 1.48 2007/02/01 00:28:18 momjian Exp $
+$PostgreSQL: pgsql/doc/src/sgml/ref/create_operator.sgml,v 1.49 2007/11/28 15:42:31 petere Exp $
 PostgreSQL documentation
 -->
 
@@ -222,9 +222,9 @@ COMMUTATOR = OPERATOR(myschema.===) ,
   <para>
    The obsolete options <literal>SORT1</>, <literal>SORT2</>,
    <literal>LTCMP</>, and <literal>GTCMP</> were formerly used to
-   specify the names of sort operators associated with a mergejoinable
+   specify the names of sort operators associated with a merge-joinable
    operator.  This is no longer necessary, since information about
-   associated operators is found by looking at btree operator families
+   associated operators is found by looking at B-tree operator families
    instead.  If one of these options is given, it is ignored except
    for implicitly setting <literal>MERGES</> true.
   </para>

doc/src/sgml/ref/delete.sgml

@@ -1,5 +1,5 @@
 <!--
-$PostgreSQL: pgsql/doc/src/sgml/ref/delete.sgml,v 1.31 2007/06/11 01:16:21 tgl Exp $
+$PostgreSQL: pgsql/doc/src/sgml/ref/delete.sgml,v 1.32 2007/11/28 15:42:31 petere Exp $
 PostgreSQL documentation
 -->
 
@@ -150,7 +150,7 @@ DELETE FROM [ ONLY ] <replaceable class="PARAMETER">table</replaceable> [ [ AS ]
       from this cursor.  The cursor must be a simple (non-join, non-aggregate)
       query on the <command>DELETE</>'s target table.
       Note that <literal>WHERE CURRENT OF</> cannot be
-      specified together with a boolean condition.
+      specified together with a Boolean condition.
      </para>
     </listitem>
    </varlistentry>

doc/src/sgml/ref/explain.sgml

@@ -1,5 +1,5 @@
 <!--
-$PostgreSQL: pgsql/doc/src/sgml/ref/explain.sgml,v 1.40 2007/04/12 22:39:21 neilc Exp $
+$PostgreSQL: pgsql/doc/src/sgml/ref/explain.sgml,v 1.41 2007/11/28 15:42:31 petere Exp $
 PostgreSQL documentation
 -->
 
@@ -160,7 +160,7 @@ ROLLBACK;
   </para>
 
   <para>
-   In order to measure the runtime cost of each node in the execution
+   In order to measure the run-time cost of each node in the execution
    plan, the current implementation of <command>EXPLAIN
    ANALYZE</command> can add considerable profiling overhead to query
    execution. As a result, running <command>EXPLAIN ANALYZE</command>

doc/src/sgml/ref/select.sgml

@@ -1,5 +1,5 @@
 <!--
-$PostgreSQL: pgsql/doc/src/sgml/ref/select.sgml,v 1.101 2007/06/08 20:26:18 tgl Exp $
+$PostgreSQL: pgsql/doc/src/sgml/ref/select.sgml,v 1.102 2007/11/28 15:42:31 petere Exp $
 PostgreSQL documentation
 -->
 
@@ -698,7 +698,7 @@ SELECT name FROM distributors ORDER BY code;
     assumed by default.  Alternatively, a specific ordering operator
     name can be specified in the <literal>USING</> clause.
     An ordering operator must be a less-than or greater-than
-    member of some btree operator family.
+    member of some B-tree operator family.
     <literal>ASC</> is usually equivalent to <literal>USING &lt;</> and
     <literal>DESC</> is usually equivalent to <literal>USING &gt;</>.
     (But the creator of a user-defined data type can define exactly what the

doc/src/sgml/ref/update.sgml

@@ -1,5 +1,5 @@
 <!--
-$PostgreSQL: pgsql/doc/src/sgml/ref/update.sgml,v 1.44 2007/06/11 01:16:22 tgl Exp $
+$PostgreSQL: pgsql/doc/src/sgml/ref/update.sgml,v 1.45 2007/11/28 15:42:31 petere Exp $
 PostgreSQL documentation
 -->
 
@@ -169,7 +169,7 @@ UPDATE [ ONLY ] <replaceable class="PARAMETER">table</replaceable> [ [ AS ] <rep
       from this cursor.  The cursor must be a simple (non-join, non-aggregate)
       query on the <command>UPDATE</>'s target table.
       Note that <literal>WHERE CURRENT OF</> cannot be
-      specified together with a boolean condition.
+      specified together with a Boolean condition.
      </para>
     </listitem>
    </varlistentry>

doc/src/sgml/runtime.sgml

@@ -1,4 +1,4 @@
-<!-- $PostgreSQL: pgsql/doc/src/sgml/runtime.sgml,v 1.385 2007/11/08 15:21:03 momjian Exp $ -->
+<!-- $PostgreSQL: pgsql/doc/src/sgml/runtime.sgml,v 1.386 2007/11/28 15:42:31 petere Exp $ -->
 
 <chapter Id="runtime">
  <title>Operating System Environment</title>
@@ -180,9 +180,9 @@ postgres$ <userinput>initdb -D /usr/local/pgsql/data</userinput>
     <acronym>NFS</> implementations have non-standard semantics, this can
     cause reliability problems (see <ulink
     url="http://www.time-travellers.org/shane/papers/NFS_considered_harmful.html"></ulink>).
-    Specifically, delayed (asynchonous) writes to the <acronym>NFS</>
+    Specifically, delayed (asynchronous) writes to the <acronym>NFS</>
     server can cause reliability problems;   if possible, mount
-    <acronym>NFS</> file systems synchonously (without caching) to avoid
+    <acronym>NFS</> file systems synchronously (without caching) to avoid
     this.  (Storage Area Networks (<acronym>SAN</>) use a low-level
     communication protocol rather than <acronym>NFS</>.)
    </para>

doc/src/sgml/textsearch.sgml

@@ -1,4 +1,4 @@
-<!-- $PostgreSQL: pgsql/doc/src/sgml/textsearch.sgml,v 1.38 2007/11/20 15:58:52 tgl Exp $ -->
+<!-- $PostgreSQL: pgsql/doc/src/sgml/textsearch.sgml,v 1.39 2007/11/28 15:42:31 petere Exp $ -->
 
 <chapter id="textsearch">
  <title id="textsearch-title">Full Text Search</title>
@@ -32,7 +32,7 @@
    Textual search operators have existed in databases for years.
    <productname>PostgreSQL</productname> has
    <literal>~</literal>, <literal>~*</literal>, <literal>LIKE</literal>, and
-   <literal>ILIKE</literal> operators for textual datatypes, but they lack
+   <literal>ILIKE</literal> operators for textual data types, but they lack
    many essential properties required by modern information systems:
   </para>
 
@@ -132,7 +132,7 @@
 
    <listitem>
     <para>
-     Map synonyms to a single word using <application>ispell</>.
+     Map synonyms to a single word using <application>Ispell</>.
     </para>
    </listitem>
 
@@ -145,7 +145,7 @@
    <listitem>
     <para>
      Map different variations of a word to a canonical form using
-     an <application>ispell</> dictionary.
+     an <application>Ispell</> dictionary.
     </para>
    </listitem>
 
@@ -725,7 +725,7 @@ UPDATE tt SET ti =
    <para>
     <function>to_tsquery</function> creates a <type>tsquery</> value from
     <replaceable>querytext</replaceable>, which must consist of single tokens
-    separated by the boolean operators <literal>&amp;</literal> (AND),
+    separated by the Boolean operators <literal>&amp;</literal> (AND),
     <literal>|</literal> (OR) and <literal>!</literal> (NOT).  These operators
     can be grouped using parentheses.  In other words, the input to
     <function>to_tsquery</function> must already follow the general rules for
@@ -783,7 +783,7 @@ SELECT to_tsquery('''supernovae stars'' &amp; !crab');
     <function>plainto_tsquery</> transforms unformatted text
     <replaceable>querytext</replaceable> to <type>tsquery</type>.
     The text is parsed and normalized much as for <function>to_tsvector</>,
-    then the <literal>&amp;</literal> (AND) boolean operator is inserted
+    then the <literal>&amp;</literal> (AND) Boolean operator is inserted
     between surviving words.
    </para>
 
@@ -798,7 +798,7 @@ SELECT to_tsquery('''supernovae stars'' &amp; !crab');
 </programlisting>
 
     Note that <function>plainto_tsquery</> cannot
-    recognize either boolean operators or weight labels in its input:
+    recognize either Boolean operators or weight labels in its input:
 
 <programlisting>
 SELECT plainto_tsquery('english', 'The Fat &amp; Rats:C');
@@ -1085,7 +1085,7 @@ ORDER BY rank DESC LIMIT 10;
      </listitem>
      <listitem>
       <para>
-       <literal>HighlightAll</literal>: boolean flag;  if
+       <literal>HighlightAll</literal>: Boolean flag;  if
        <literal>true</literal> the whole document will be highlighted.
       </para>
      </listitem>
@@ -1131,7 +1131,7 @@ query.',
     <type>tsvector</type> summary, so it can be slow and should be used with
     care.  A typical mistake is to call <function>ts_headline</function> for
     <emphasis>every</emphasis> matching document when only ten documents are
-    to be shown. <acronym>SQL</acronym> subselects can help; here is an
+    to be shown. <acronym>SQL</acronym> subqueries can help; here is an
     example:
 
 <programlisting>
@@ -1945,7 +1945,7 @@ SELECT alias, description, token FROM ts_debug('http://example.com/stuff/index.h
 
     <listitem>
      <para>
-      Linguistic - ispell dictionaries try to reduce input words to a
+      Linguistic - Ispell dictionaries try to reduce input words to a
       normalized form; stemmer dictionaries remove word endings
      </para>
     </listitem>
@@ -2395,7 +2395,7 @@ crab nebulae : crab
 </programlisting>
 
     Below we create a dictionary and bind some token types to
-    an astronomical thesaurus and english stemmer:
+    an astronomical thesaurus and English stemmer:
 
 <programlisting>
 CREATE TEXT SEARCH DICTIONARY thesaurus_astro (
@@ -2610,7 +2610,7 @@ CREATE TEXT SEARCH DICTIONARY english_stem (
     Several predefined text search configurations are available, and
     you can create custom configurations easily.  To facilitate management
     of text search objects, a set of <acronym>SQL</acronym> commands
-    is available, and there are several psql commands that display information
+    is available, and there are several <application>psql</application> commands that display information
     about text search objects (<xref linkend="textsearch-psql">).
    </para>
 
@@ -2644,7 +2644,7 @@ CREATE TEXT SEARCH DICTIONARY pg_dict (
 );
 </programlisting>
 
-    Next we register the <productname>ispell</> dictionary
+    Next we register the <productname>Ispell</> dictionary
     <literal>english_ispell</literal>, which has its own configuration files:
 
 <programlisting>
@@ -2834,7 +2834,7 @@ SELECT * FROM ts_debug('english','a fat  cat sat on a mat - it ate a fat rats');
   <para>
    For a more extensive demonstration, we
    first create a <literal>public.english</literal> configuration and
-   ispell dictionary for the English language:
+   Ispell dictionary for the English language:
   </para>
 
 <programlisting>

doc/src/sgml/wal.sgml

@@ -1,4 +1,4 @@
-<!-- $PostgreSQL: pgsql/doc/src/sgml/wal.sgml,v 1.45 2007/08/01 22:45:07 tgl Exp $ -->
+<!-- $PostgreSQL: pgsql/doc/src/sgml/wal.sgml,v 1.46 2007/11/28 15:42:31 petere Exp $ -->
 
 <chapter id="wal">
  <title>Reliability and the Write-Ahead Log</title>
@@ -162,7 +162,7 @@
    <firstterm>Asynchronous commit</> is an option that allows transactions
    to complete more quickly, at the cost that the most recent transactions may
    be lost if the database should crash.  In many applications this is an
-   acceptable tradeoff.
+   acceptable trade-off.
   </para>
 
   <para>
@@ -210,7 +210,7 @@
   <para>
    The user can select the commit mode of each transaction, so that
    it is possible to have both synchronous and asynchronous commit
-   transactions running concurrently.  This allows flexible tradeoffs
+   transactions running concurrently.  This allows flexible trade-offs
    between performance and certainty of transaction durability.
    The commit mode is controlled by the user-settable parameter
    <xref linkend="guc-synchronous-commit">, which can be changed in any of
@@ -223,7 +223,7 @@
    Certain utility commands, for instance <command>DROP TABLE</>, are
    forced to commit synchronously regardless of the setting of
    <varname>synchronous_commit</varname>.  This is to ensure consistency
-   between the server's filesystem and the logical state of the database.
+   between the server's file system and the logical state of the database.
    The commands supporting two-phase commit, such as <command>PREPARE
    TRANSACTION</>, are also always synchronous.
   </para>
@@ -234,11 +234,11 @@
    <acronym>WAL</acronym> records,
    then changes made during that transaction <emphasis>will</> be lost.
    The duration of the
-   risk window is limited because a background process (the <quote>wal
+   risk window is limited because a background process (the <quote>WAL
    writer</>) flushes unwritten <acronym>WAL</acronym> records to disk
    every <xref linkend="guc-wal-writer-delay"> milliseconds.
    The actual maximum duration of the risk window is three times
-   <varname>wal_writer_delay</varname> because the wal writer is
+   <varname>wal_writer_delay</varname> because the WAL writer is
    designed to favor writing whole pages at a time during busy periods.
   </para>
 

doc/src/sgml/xoper.sgml

@@ -1,4 +1,4 @@
-<!-- $PostgreSQL: pgsql/doc/src/sgml/xoper.sgml,v 1.42 2007/02/06 04:38:31 tgl Exp $ -->
+<!-- $PostgreSQL: pgsql/doc/src/sgml/xoper.sgml,v 1.43 2007/11/28 15:42:31 petere Exp $ -->
 
  <sect1 id="xoper">
   <title>User-Defined Operators</title>
@@ -340,7 +340,7 @@ table1.column1 OP table2.column2
      some form of equality.  In most cases it is only practical to support
      hashing for operators that take the same data type on both sides.
      However, sometimes it is possible to design compatible hash functions
-     for two or more datatypes; that is, functions that will generate the
+     for two or more data types; that is, functions that will generate the
      same hash codes for <quote>equal</> values, even though the values
      have different representations.  For example, it's fairly simple
      to arrange this property when hashing integers of different widths.
@@ -378,8 +378,8 @@ table1.column1 OP table2.column2
      if they are different) that appears in the same operator family.
      If this is not the case, planner errors might occur when the operator
      is used.  Also, it is a good idea (but not strictly required) for
-     a hash operator family that supports multiple datatypes to provide
+     a hash operator family that supports multiple data types to provide
-     equality operators for every combination of the datatypes; this
+     equality operators for every combination of the data types; this
      allows better optimization.
     </para>
 
@@ -450,8 +450,8 @@ table1.column1 OP table2.column2
      if they are different) that appears in the same operator family.
      If this is not the case, planner errors might occur when the operator
      is used.  Also, it is a good idea (but not strictly required) for
-     a btree operator family that supports multiple datatypes to provide
+     a btree operator family that supports multiple data types to provide
-     equality operators for every combination of the datatypes; this
+     equality operators for every combination of the data types; this
      allows better optimization.
     </para>