# Traditional Chinese Messages for the nano editor.
# Copyright (C) 2004, 05 Free Software Foundation, Inc.
# This file is distributed under the same license as the nano package.
#
# Wei-Lun Chao <bluebat@member.fsf.org>, 2004, 2005, 2013.
msgid ""
msgstr ""
"Project-Id-Version: nano 2.3.2pre4\n"
"Report-Msgid-Bugs-To: nano-devel@gnu.org\n"
"POT-Creation-Date: 2018-01-02 15:59+0100\n"
"PO-Revision-Date: 2013-06-24 23:29+0800\n"
"Last-Translator: Wei-Lun Chao <bluebat@member.fsf.org>\n"
"Language-Team: Chinese (traditional) <zh-l10n@linux.org.tw>\n"
"Language: zh_TW\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Bugs: Report translation errors to the Language-Team address.\n"
"Plural-Forms: nplurals=1; plural=0;\n"

#: src/browser.c:67
#, fuzzy, c-format
msgid "Cannot open directory: %s"
msgstr "無法上移一個目錄"

#. TRANSLATORS: This is a prompt.
#: src/browser.c:230
msgid "Go To Directory"
msgstr "跳至目錄"

#: src/browser.c:233 src/browser.c:691 src/files.c:1076 src/files.c:2090
#: src/nano.c:1080 src/search.c:156 src/search.c:240 src/search.c:758
#: src/search.c:815 src/text.c:3045 src/text.c:3239
msgid "Cancelled"
msgstr "已取消"

#. TRANSLATORS: This refers to the confining effect of the
#. * option --operatingdir, not of --restricted.
#: src/browser.c:250 src/browser.c:281
#, fuzzy, c-format
msgid "Can't go outside of %s"
msgstr "無法寫入 %s 外部"

#: src/browser.c:272
msgid "Can't move up a directory"
msgstr "無法上移一個目錄"

#: src/browser.c:287 src/files.c:967 src/files.c:973 src/files.c:1611
#: src/files.c:1728 src/files.c:1769 src/files.c:1789 src/files.c:1901
#: src/history.c:311 src/history.c:407 src/rcfile.c:541 src/rcfile.c:1216
#, c-format
msgid "Error reading %s: %s"
msgstr "讀取 %s 時發生錯誤: %s"

#: src/browser.c:367
msgid "The working directory has disappeared"
msgstr ""

#. TRANSLATORS: Try to keep this at most 7 characters.
#: src/browser.c:562 src/browser.c:569
msgid "(dir)"
msgstr "(目錄)"

#. TRANSLATORS: Try to keep this at most 12 characters.
#: src/browser.c:566
msgid "(parent dir)"
msgstr "(上層目錄)"

#. TRANSLATORS: Try to keep this at most 7 characters.
#. * If necessary, you can leave out the parentheses.
#: src/browser.c:596
msgid "(huge)"
msgstr ""

#. TRANSLATORS: This is the main search prompt.
#: src/browser.c:680 src/search.c:136
msgid "Search"
msgstr "搜尋"

#: src/browser.c:721 src/browser.c:726 src/search.c:315
msgid "Search Wrapped"
msgstr "已從頭搜尋"

#: src/browser.c:737 src/search.c:446
msgid "This is the only occurrence"
msgstr "這是惟一出現之處"

#: src/browser.c:782 src/search.c:414
msgid "No current search pattern"
msgstr "沒有符合目前搜尋形式者"

#: src/color.c:185
#, fuzzy, c-format
msgid "Unknown syntax name: %s"
msgstr "缺少語法名稱"

#: src/color.c:241
#, c-format
msgid "magic_load() failed: %s"
msgstr ""

#: src/color.c:245
#, c-format
msgid "magic_file(%s) failed: %s"
msgstr ""

#: src/files.c:45
#, c-format
msgid "Directory '%s' does not exist"
msgstr ""

#: src/files.c:47
#, c-format
msgid "Path '%s': %s"
msgstr ""

#: src/files.c:49
#, fuzzy, c-format
msgid "Path '%s' is not a directory"
msgstr "\"%s\" 是一個目錄"

#: src/files.c:51
#, c-format
msgid "Path '%s' is not accessible"
msgstr ""

#: src/files.c:53
#, c-format
msgid "Directory '%s' is not writable"
msgstr ""

#. TRANSLATORS: Keep the next eight messages at most 76 characters.
#: src/files.c:183
msgid "Couldn't determine my identity for lock file (getpwuid() failed)"
msgstr "無法確認我的身分以用於鎖定檔案 (getpwuid() 失敗)"

#: src/files.c:192
#, fuzzy, c-format
msgid "Couldn't determine hostname for lock file: %s"
msgstr "無法確認主機名稱以用於鎖定檔案：%s"

#: src/files.c:212 src/files.c:221 src/files.c:259 src/files.c:266
#, c-format
msgid "Error writing lock file %s: %s"
msgstr "寫入鎖定檔案 %s 時發生錯誤：%s"

#: src/files.c:288
#, c-format
msgid "Error deleting lock file %s: %s"
msgstr "刪除鎖定檔案 %s 時發生錯誤：%s"

#: src/files.c:319
#, fuzzy, c-format
msgid "Error opening lock file %s: %s"
msgstr "開啟鎖定檔案 %s 時發生錯誤：%s"

#: src/files.c:333
#, fuzzy, c-format
msgid "Error reading lock file %s: Not enough data read"
msgstr "讀取鎖定檔案 %s 時發生錯誤：未讀取足夠的資料"

#. TRANSLATORS: The second %s is the name of the user, the third that of the editor.
#: src/files.c:349
#, c-format
msgid "File %s is being edited (by %s with %s, PID %s); continue?"
msgstr ""

#: src/files.c:425
#, fuzzy, c-format
msgid "Can't read file from outside of %s"
msgstr "無法插入 %s 外部的檔案"

#: src/files.c:440 src/files.c:957 src/rcfile.c:520
#, c-format
msgid "\"%s\" is a directory"
msgstr "\"%s\" 是一個目錄"

#: src/files.c:442
#, fuzzy, c-format
msgid "\"%s\" is not a normal file"
msgstr "\"%s\" 是一個裝置檔案"

#: src/files.c:593
msgid "No more open file buffers"
msgstr "無多餘檔案緩衝區可開啟"

#: src/files.c:618
#, c-format
msgid "Switched to %s"
msgstr "切換至 %s"

#: src/files.c:620 src/global.c:1045 src/winio.c:2065
msgid "New Buffer"
msgstr "新緩衝區"

#: src/files.c:888
#, c-format
msgid "File '%s' is unwritable"
msgstr ""

#. TRANSLATORS: Keep the next four messages at most 78 characters.
#: src/files.c:892
#, fuzzy, c-format
msgid "Read %zu line (Converted from DOS and Mac format)"
msgid_plural "Read %zu lines (Converted from DOS and Mac format)"
msgstr[0] "已讀取 %lu 列 (轉檔自 DOS 與 Mac 格式)"

#: src/files.c:897
#, fuzzy, c-format
msgid "Read %zu line (Converted from Mac format)"
msgid_plural "Read %zu lines (Converted from Mac format)"
msgstr[0] "已讀取 %lu 列 (轉檔自 Mac 格式)"

#: src/files.c:902
#, fuzzy, c-format
msgid "Read %zu line (Converted from DOS format)"
msgid_plural "Read %zu lines (Converted from DOS format)"
msgstr[0] "已讀取 %lu 列 (轉檔自 DOS 格式)"

#: src/files.c:908
#, fuzzy, c-format
msgid "Read %zu line"
msgid_plural "Read %zu lines"
msgstr[0] "已讀取 %lu 列"

#: src/files.c:943
msgid "New File"
msgstr "新檔案"

#: src/files.c:948
#, fuzzy, c-format
msgid "File \"%s\" not found"
msgstr "找不到 \"%s\""

#: src/files.c:958 src/rcfile.c:521
#, c-format
msgid "\"%s\" is a device file"
msgstr "\"%s\" 是一個裝置檔案"

#: src/files.c:976
msgid "Reading File"
msgstr "正在讀取檔案"

#. TRANSLATORS: The next four messages are prompts.
#: src/files.c:1042
#, fuzzy
msgid "Command to execute in new buffer"
msgstr "在新緩衝區中執行的命令 [從 %s] "

#: src/files.c:1045
#, fuzzy
msgid "Command to execute"
msgstr "執行的命令 [從 %s] "

#: src/files.c:1051
#, fuzzy, c-format
msgid "File to insert into new buffer [from %s]"
msgstr "所要插入新緩衝區的檔案 [從 %s] "

#: src/files.c:1054
#, fuzzy, c-format
msgid "File to insert [from %s]"
msgstr "所要插入的檔案 [從 %s] "

#: src/files.c:1197
msgid "Key invalid in non-multibuffer mode"
msgstr "非多重緩衝區模式中此按鍵無效"

#: src/files.c:1410
#, fuzzy
msgid "Invalid operating directory\n"
msgstr "設定操作目錄"

#: src/files.c:1459
#, fuzzy
msgid "Failed to write backup file; continue saving? (Say N if unsure.) "
msgstr "寫入備份檔案時失敗，要繼續儲存？(如果不確定就以 N 表示) "

#: src/files.c:1476
#, fuzzy
msgid "Invalid backup directory\n"
msgstr "無法上移一個目錄"

#: src/files.c:1569
#, c-format
msgid "Can't write outside of %s"
msgstr "無法寫入 %s 外部"

#: src/files.c:1647 src/files.c:1671 src/files.c:1689 src/files.c:1703
#: src/files.c:1715 src/files.c:1738
#, c-format
msgid "Error writing backup file %s: %s"
msgstr "寫入暫存檔案 %s 時發生錯誤：%s"

#: src/files.c:1648 src/nano.c:665
msgid "Too many backup files?"
msgstr "太多備份檔案？"

#: src/files.c:1778 src/files.c:1800 src/help.c:55 src/help.c:122
#: src/text.c:2973 src/text.c:2985 src/text.c:3363 src/text.c:3374
#, c-format
msgid "Error writing temp file: %s"
msgstr "寫入暫存檔案 %s 時發生錯誤"

#: src/files.c:1819 src/files.c:1829 src/files.c:1849 src/files.c:1866
#: src/files.c:1876 src/files.c:1908 src/files.c:1915
#, c-format
msgid "Error writing %s: %s"
msgstr "寫入 %s 時發生錯誤: %s"

#: src/files.c:1965
#, fuzzy, c-format
msgid "Wrote %zu line"
msgid_plural "Wrote %zu lines"
msgstr[0] "已寫入 %lu 列"

#: src/files.c:2050
msgid " [DOS Format]"
msgstr " [DOS 格式]"

#: src/files.c:2051
msgid " [Mac Format]"
msgstr " [Mac 格式]"

#: src/files.c:2052
msgid " [Backup]"
msgstr " [備份]"

#. TRANSLATORS: The next six strings are prompts.
#: src/files.c:2059
msgid "Prepend Selection to File"
msgstr "前引選擇部分於檔案"

#: src/files.c:2060
msgid "Append Selection to File"
msgstr "附加選擇部分至檔案"

#: src/files.c:2061
msgid "Write Selection to File"
msgstr "寫入選擇部分至檔案"

#: src/files.c:2063
msgid "File Name to Prepend to"
msgstr "要前引於的檔案名稱"

#: src/files.c:2064
msgid "File Name to Append to"
msgstr "要附加至的檔案名稱"

#: src/files.c:2067
msgid "File Name to Write"
msgstr "要寫入的檔案名稱"

#. TRANSLATORS: Restricted mode forbids overwriting.
#: src/files.c:2176
msgid "File exists -- cannot overwrite"
msgstr ""

#: src/files.c:2186
#, fuzzy
msgid "Save file under DIFFERENT NAME? "
msgstr "以不同的名稱存檔？"

#: src/files.c:2194
#, fuzzy, c-format
msgid "File \"%s\" exists; OVERWRITE? "
msgstr "檔案已存在，要覆寫嗎？"

#: src/files.c:2216
msgid "File on disk has changed"
msgstr ""

#: src/files.c:2218
#, fuzzy
msgid "File was modified since you opened it; continue saving? "
msgstr "檔案從您開啟它後已被修改，要繼續儲存？"

#: src/files.c:2637
msgid "(more)"
msgstr "(更多)"

#. TRANSLATORS: Try to keep the next fifteen strings at most 10 characters.
#: src/global.c:496
msgid "Exit"
msgstr "離開"

#: src/global.c:497
msgid "Close"
msgstr "關閉"

#: src/global.c:498
#, fuzzy
msgid "Uncut Text"
msgstr "還原剪下文字"

#: src/global.c:500
#, fuzzy
msgid "Unjustify"
msgstr "還原對齊"

#: src/global.c:506
msgid "Read File"
msgstr "讀檔"

#: src/global.c:507
msgid "Where Is"
msgstr "搜尋"

#: src/global.c:508
msgid "Replace"
msgstr "置換"

#: src/global.c:509
msgid "Go To Line"
msgstr "跳列"

#: src/global.c:510
msgid "Prev Line"
msgstr "上列"

#: src/global.c:511
msgid "Next Line"
msgstr "下列"

#: src/global.c:512
msgid "Prev Page"
msgstr "上頁"

#: src/global.c:513
msgid "Next Page"
msgstr "下頁"

#: src/global.c:515
msgid "Justify"
msgstr "對齊"

#: src/global.c:516
msgid "FullJstify"
msgstr "全部對齊"

#: src/global.c:518
msgid "Refresh"
msgstr "重新顯示"

#. TRANSLATORS: Try to keep this string at most 12 characters.
#: src/global.c:520
msgid "WhereIs Next"
msgstr "下一個位置"

#. TRANSLATORS: The next long series of strings are shortcut descriptions;
#. * they are best kept shorter than 56 characters, but may be longer.
#: src/global.c:525
msgid "Cancel the current function"
msgstr "取消目前功能"

#: src/global.c:526
msgid "Display this help text"
msgstr "顯示這份說明文字"

#: src/global.c:529
msgid "Close the current file buffer / Exit from nano"
msgstr "關閉目前檔案緩衝區 / 離開 nano"

#: src/global.c:531
msgid "Exit from nano"
msgstr "離開 nano"

#: src/global.c:535
msgid "Write the current file to disk"
msgstr "寫入目前檔案至磁碟"

#: src/global.c:537
msgid "Insert another file into the current one"
msgstr "插入它檔至目前檔案"

#: src/global.c:539
#, fuzzy
msgid "Search forward for a string or a regular expression"
msgstr "使用字串或正規表示式來搜尋"

#: src/global.c:541
#, fuzzy
msgid "Search backward for a string or a regular expression"
msgstr "使用字串或正規表示式來搜尋"

#: src/global.c:543
#, fuzzy
msgid "Search for a string"
msgstr "使用字串或正規表示式來搜尋"

#: src/global.c:544
msgid "Refresh the file list"
msgstr ""

#: src/global.c:546
#, fuzzy
msgid "Go to lefthand column"
msgstr "跳至指定列與行位置"

#: src/global.c:547
#, fuzzy
msgid "Go to righthand column"
msgstr "跳至指定列與行位置"

#: src/global.c:548
#, fuzzy
msgid "Go to first row in this column"
msgstr "跳至列表中的第一個檔案"

#: src/global.c:549
#, fuzzy
msgid "Go to last row in this column"
msgstr "跳至列表中的最後一個檔案"

#: src/global.c:552
#, fuzzy
msgid "Go one screenful up"
msgstr "跳至後一畫面"

#: src/global.c:553
#, fuzzy
msgid "Go one screenful down"
msgstr "跳至後一畫面"

#: src/global.c:555
msgid "Cut the current line and store it in the cutbuffer"
msgstr "剪下目前這列並存至剪貼簿"

#: src/global.c:557
msgid "Uncut from the cutbuffer into the current line"
msgstr "從剪貼簿還原至目前這列"

#: src/global.c:558
msgid "Display the position of the cursor"
msgstr "顯示游標位置"

#: src/global.c:560
msgid "Invoke the spell checker, if available"
msgstr "嘗試呼叫拼字檢查"

#: src/global.c:562
msgid "Replace a string or a regular expression"
msgstr "置換字串或正規表示式"

#: src/global.c:563
msgid "Go to line and column number"
msgstr "跳至指定列與行位置"

#: src/global.c:564
#, fuzzy
msgid "Repeat the last search"
msgstr "重覆上次搜尋"

#: src/global.c:566
#, fuzzy
msgid "Mark text starting from the cursor position"
msgstr "標記游標所在文字"

#: src/global.c:568
msgid "Copy the current line and store it in the cutbuffer"
msgstr "剪下目前這列並存至剪貼簿"

#: src/global.c:569
#, fuzzy
msgid "Indent the current line (or marked lines)"
msgstr "縮排目前這列"

#: src/global.c:570
#, fuzzy
msgid "Unindent the current line (or marked lines)"
msgstr "取消目前這列的縮排"

#: src/global.c:571
msgid "Undo the last operation"
msgstr "復原上次的動作"

#: src/global.c:572
msgid "Redo the last undone operation"
msgstr "重做最後一筆已復原作業"

#: src/global.c:574
msgid "Go back one character"
msgstr "向後跳一字元"

#: src/global.c:575
msgid "Go forward one character"
msgstr "向前跳一字元"

#: src/global.c:576
msgid "Go back one word"
msgstr "向後跳一字詞"

#: src/global.c:577
msgid "Go forward one word"
msgstr "向前跳一字詞"

#: src/global.c:578
msgid "Go to previous line"
msgstr "跳至前一列"

#: src/global.c:579
msgid "Go to next line"
msgstr "跳至後一列"

#: src/global.c:580
msgid "Go to beginning of current line"
msgstr "跳至目前列首"

#: src/global.c:581
msgid "Go to end of current line"
msgstr "跳至目前列尾"

#: src/global.c:582
#, fuzzy
msgid "Go to previous block of text"
msgstr "跳至前一列"

#: src/global.c:583
#, fuzzy
msgid "Go to next block of text"
msgstr "跳至後一列"

#: src/global.c:586
msgid "Go to beginning of paragraph; then of previous paragraph"
msgstr "跳至目前段落開頭；然後是前一段落的開頭"

#: src/global.c:588
msgid "Go just beyond end of paragraph; then of next paragraph"
msgstr "跳至目前段落結尾；然後是後一段落的結尾"

#: src/global.c:590
msgid "Go to the first line of the file"
msgstr "跳至檔案第一列"

#: src/global.c:591
msgid "Go to the last line of the file"
msgstr "跳至檔案最後一列"

#: src/global.c:593
msgid "Go to the matching bracket"
msgstr "跳至對應的括號"

#: src/global.c:595
msgid "Scroll up one line without scrolling the cursor"
msgstr "向上捲動一列但不捲動游標"

#: src/global.c:597
msgid "Scroll down one line without scrolling the cursor"
msgstr "向下捲動一列但不捲動游標"

#: src/global.c:600
msgid "Switch to the previous file buffer"
msgstr "切換至上個檔案緩衝區"

#: src/global.c:601
msgid "Switch to the next file buffer"
msgstr "切換至下個檔案緩衝區"

#: src/global.c:603
msgid "Insert the next keystroke verbatim"
msgstr "插入下個按鍵的原形"

#: src/global.c:604
msgid "Insert a tab at the cursor position"
msgstr "插入跳格字元於游標位置"

#: src/global.c:605
msgid "Insert a newline at the cursor position"
msgstr "插入換列字元於游標位置"

#: src/global.c:606
msgid "Delete the character under the cursor"
msgstr "刪除游標之下的字元"

#: src/global.c:608
msgid "Delete the character to the left of the cursor"
msgstr "刪除游標左側的字元"

#: src/global.c:611
#, fuzzy
msgid "Cut backward from cursor to word start"
msgstr "從游標剪下至列尾"

#: src/global.c:613
#, fuzzy
msgid "Cut forward from cursor to next word start"
msgstr "從游標剪下至列尾"

#: src/global.c:615
msgid "Cut from the cursor position to the end of the file"
msgstr "從游標位置剪下至檔案結尾"

#: src/global.c:618
msgid "Justify the current paragraph"
msgstr "對齊目前段落"

#: src/global.c:619
msgid "Justify the entire file"
msgstr "對齊整個檔案"

#: src/global.c:623
msgid "Count the number of words, lines, and characters"
msgstr "計算字數、列數與字元數"

#: src/global.c:626
msgid "Refresh (redraw) the current screen"
msgstr "重新顯示目前畫面"

#: src/global.c:628
#, fuzzy
msgid "Suspend the editor (if suspension is enabled)"
msgstr "懸置編輯器 (如果懸置已啟用)"

#: src/global.c:630
#, fuzzy
msgid "Try and complete the current word"
msgstr "縮排目前這列"

#: src/global.c:634
msgid "Comment/uncomment the current line (or marked lines)"
msgstr ""

#: src/global.c:637
msgid "Save file without prompting"
msgstr ""

#: src/global.c:638
msgid "Search next occurrence backward"
msgstr ""

#: src/global.c:639
msgid "Search next occurrence forward"
msgstr ""

#: src/global.c:640
msgid "Start/stop recording a macro"
msgstr ""

#: src/global.c:641
#, fuzzy
msgid "Run the last recorded macro"
msgstr "復原上次的動作"

#: src/global.c:644
msgid "Toggle the case sensitivity of the search"
msgstr "切換搜尋的大小寫符合"

#: src/global.c:646
msgid "Reverse the direction of the search"
msgstr "倒轉搜尋方向"

#: src/global.c:648
msgid "Toggle the use of regular expressions"
msgstr "切換使用正規表示式"

#: src/global.c:651
msgid "Recall the previous search/replace string"
msgstr "重用上次搜尋/置換字串"

#: src/global.c:653
msgid "Recall the next search/replace string"
msgstr "重用下次搜尋/置換字串"

#: src/global.c:656
msgid "Toggle the use of DOS format"
msgstr "切換使用 DOS 格式"

#: src/global.c:657
msgid "Toggle the use of Mac format"
msgstr "切換使用 Mac 格式"

#: src/global.c:658
msgid "Toggle appending"
msgstr "切換附加"

#: src/global.c:659
msgid "Toggle prepending"
msgstr "切換前置"

#: src/global.c:660
msgid "Toggle backing up of the original file"
msgstr "切換備份既有檔案"

#: src/global.c:661
msgid "Execute external command"
msgstr "執行外部命令"

#: src/global.c:664
msgid "Toggle the use of a new buffer"
msgstr "切換使用新緩衝區"

#: src/global.c:666
msgid "Close buffer without saving it"
msgstr ""

#: src/global.c:668
msgid "Go to file browser"
msgstr "呼叫檔案選單"

#: src/global.c:669
msgid "Exit from the file browser"
msgstr "從檔案選單離開"

#: src/global.c:670
msgid "Go to the first file in the list"
msgstr "跳至列表中的第一個檔案"

#: src/global.c:671
msgid "Go to the last file in the list"
msgstr "跳至列表中的最後一個檔案"

#: src/global.c:672
msgid "Go to the previous file in the list"
msgstr "跳至列表中的上一個檔案"

#: src/global.c:673
msgid "Go to the next file in the list"
msgstr "跳至列表中的下一個檔案"

#: src/global.c:674
msgid "Go to directory"
msgstr "跳至目錄"

#: src/global.c:677
#, fuzzy
msgid "Invoke the linter, if available"
msgstr "嘗試呼叫拼字檢查"

#: src/global.c:678
#, fuzzy
msgid "Go to previous linter msg"
msgstr "跳至前一列"

#: src/global.c:679
#, fuzzy
msgid "Go to next linter msg"
msgstr "跳至後一列"

#: src/global.c:681
#, fuzzy
msgid "Invoke formatter, if available"
msgstr "嘗試呼叫拼字檢查"

#. TRANSLATORS: Try to keep the following strings at most 10 characters.
#: src/global.c:696
msgid "Get Help"
msgstr "求助"

#: src/global.c:699 src/prompt.c:714
msgid "Cancel"
msgstr "取消"

#: src/global.c:712
#, fuzzy
msgid "Write Out"
msgstr "寫入"

#: src/global.c:751
msgid "Go To Dir"
msgstr "跳至目錄"

#: src/global.c:768
msgid "Cut Text"
msgstr "剪下文字"

#: src/global.c:783
msgid "To Spell"
msgstr "拼字檢查"

#: src/global.c:787
#, fuzzy
msgid "To Linter"
msgstr "跳列"

#: src/global.c:790
#, fuzzy
msgid "Formatter"
msgstr "DOS 格式"

#: src/global.c:796
msgid "Cur Pos"
msgstr "游標位置"

#: src/global.c:808
msgid "Undo"
msgstr "復原"

#: src/global.c:810
msgid "Redo"
msgstr "重做"

#: src/global.c:813
msgid "Mark Text"
msgstr "標記文字"

#: src/global.c:815
msgid "Copy Text"
msgstr "複製文字"

#: src/global.c:819
msgid "Case Sens"
msgstr "依大小寫"

#: src/global.c:821
msgid "Regexp"
msgstr "正規表示式"

#: src/global.c:823
msgid "Backwards"
msgstr "向後搜尋"

#: src/global.c:829
msgid "No Replace"
msgstr "不置換"

#: src/global.c:841
#, fuzzy
msgid "To Bracket"
msgstr "並非一個括號"

#: src/global.c:847
#, fuzzy
msgid "Previous"
msgstr "上個檔案"

#: src/global.c:849
#, fuzzy
msgid "Next"
msgstr "下頁"

#: src/global.c:853 src/global.c:858
msgid "Back"
msgstr "向後"

#: src/global.c:855 src/global.c:860
msgid "Forward"
msgstr "向前"

#: src/global.c:864
msgid "Prev Word"
msgstr "前一個字"

#: src/global.c:866
msgid "Next Word"
msgstr "後一個字"

#: src/global.c:869
msgid "Home"
msgstr "頂端"

#: src/global.c:871
msgid "End"
msgstr "尾端"

#: src/global.c:879
msgid "Scroll Up"
msgstr "向上捲動"

#: src/global.c:881
msgid "Scroll Down"
msgstr "向下捲動"

#: src/global.c:885
#, fuzzy
msgid "Prev Block"
msgstr "前一個字"

#: src/global.c:887
#, fuzzy
msgid "Next Block"
msgstr "後一個字"

#: src/global.c:890
msgid "Beg of Par"
msgstr "段落開頭"

#: src/global.c:892
msgid "End of Par"
msgstr "段落結尾"

#: src/global.c:901
msgid "First Line"
msgstr "首列"

#: src/global.c:903
msgid "Last Line"
msgstr "尾列"

#: src/global.c:907
#, fuzzy
msgid "Prev File"
msgstr "上個檔案"

#: src/global.c:909
msgid "Next File"
msgstr "下個檔案"

#: src/global.c:925
msgid "Tab"
msgstr "跳格鍵"

#: src/global.c:927
msgid "Enter"
msgstr "輸入鍵"

#: src/global.c:930
msgid "Delete"
msgstr "刪除鍵"

#: src/global.c:932
msgid "Backspace"
msgstr "退格鍵"

#. TRANSLATORS: The next two strings refer to cutting words.
#: src/global.c:943
#, fuzzy
msgid "Cut Left"
msgstr "剪下文字"

#: src/global.c:945
msgid "Cut Right"
msgstr ""

#: src/global.c:947
msgid "CutTillEnd"
msgstr "刪至末端"

#: src/global.c:957
msgid "Word Count"
msgstr "計算字數"

#: src/global.c:961
#, fuzzy
msgid "Verbatim"
msgstr "原形輸入"

#: src/global.c:967
msgid "Suspend"
msgstr "懸置"

#: src/global.c:971
msgid "Indent Text"
msgstr "縮排文字"

#: src/global.c:973
msgid "Unindent Text"
msgstr "取消縮排文字"

#: src/global.c:977
#, fuzzy
msgid "Comment Lines"
msgstr "下列"

#: src/global.c:981
msgid "Complete"
msgstr ""

#: src/global.c:985
msgid "Record"
msgstr ""

#: src/global.c:987
msgid "Run Macro"
msgstr ""

#. TRANSLATORS: This starts a backward search.
#: src/global.c:991
#, fuzzy
msgid "Where Was"
msgstr "搜尋"

#: src/global.c:994
msgid "Save"
msgstr ""

#: src/global.c:999
msgid "PrevHstory"
msgstr "上一筆記錄"

#: src/global.c:1001
msgid "NextHstory"
msgstr "下一筆記錄"

#: src/global.c:1010
msgid "Go To Text"
msgstr "跳至文字"

#: src/global.c:1014
msgid "DOS Format"
msgstr "DOS 格式"

#: src/global.c:1016
msgid "Mac Format"
msgstr "Mac 格式"

#: src/global.c:1024
msgid "Append"
msgstr "附加"

#: src/global.c:1026
msgid "Prepend"
msgstr "前引"

#: src/global.c:1029
msgid "Backup File"
msgstr "備份檔案"

#: src/global.c:1036
msgid "Execute Command"
msgstr "執行命令"

#: src/global.c:1051
msgid "To Files"
msgstr "檔案選單"

#: src/global.c:1059
msgid "First File"
msgstr "第一個檔案"

#: src/global.c:1061
msgid "Last File"
msgstr "最後的檔案"

#: src/global.c:1064
msgid "Left Column"
msgstr ""

#: src/global.c:1066
msgid "Right Column"
msgstr ""

#: src/global.c:1068
msgid "Top Row"
msgstr ""

#: src/global.c:1070
msgid "Bottom Row"
msgstr ""

#: src/global.c:1075
msgid "Discard buffer"
msgstr ""

#. TRANSLATORS: Try to keep the next two strings at most 20 characters.
#: src/global.c:1080
#, fuzzy
msgid "Prev Lint Msg"
msgstr "上列"

#: src/global.c:1082
#, fuzzy
msgid "Next Lint Msg"
msgstr "下列"

#. TRANSLATORS: The next eighteen strings are toggle descriptions;
#. * they are best kept shorter than 40 characters, but may be longer.
#: src/global.c:1409
msgid "Help mode"
msgstr "輔助模式"

#: src/global.c:1411
msgid "Constant cursor position display"
msgstr "持續顯示游標位置"

#: src/global.c:1413
msgid "Use of one more line for editing"
msgstr "編輯時多使用一列"

#: src/global.c:1415
msgid "Smooth scrolling"
msgstr "平滑式捲動畫面"

#: src/global.c:1417
#, fuzzy
msgid "Soft wrapping of overlong lines"
msgstr "不要自動換列"

#: src/global.c:1419
msgid "Whitespace display"
msgstr "顯示空格"

#: src/global.c:1421
msgid "Color syntax highlighting"
msgstr "語法色彩標示"

#: src/global.c:1423
msgid "Smart home key"
msgstr "智慧型 HOME 按鍵"

#: src/global.c:1425
msgid "Auto indent"
msgstr "自動縮排"

#: src/global.c:1427
msgid "Cut to end"
msgstr "剪下至列尾"

#: src/global.c:1429
#, fuzzy
msgid "Hard wrapping of overlong lines"
msgstr "不要自動換列"

#: src/global.c:1431
msgid "Conversion of typed tabs to spaces"
msgstr "已輸入跳格符號至空白的轉換"

#: src/global.c:1433
msgid "Backup files"
msgstr "備份檔案"

#: src/global.c:1435
msgid "Reading file into separate buffer"
msgstr ""

#: src/global.c:1437
msgid "Mouse support"
msgstr "滑鼠支援"

#: src/global.c:1439
msgid "No conversion from DOS/Mac format"
msgstr "不從 DOS/Mac 格式轉檔"

#: src/global.c:1441
msgid "Suspension"
msgstr "懸置"

#: src/global.c:1443
msgid "Line numbering"
msgstr ""

#: src/help.c:302
msgid ""
"Search Command Help Text\n"
"\n"
" Enter the words or characters you would like to search for, and then press "
"Enter.  If there is a match for the text you entered, the screen will be "
"updated to the location of the nearest match for the search string.\n"
"\n"
" The previous search string will be shown in brackets after the search "
"prompt.  Hitting Enter without entering any text will perform the previous "
"search.  "
msgstr ""
"搜尋命令輔助說明\n"
"\n"
" 首先輸入您想要搜尋的字串或字元，然後按下輸入鍵 (Enter)。如果存在著 符合您所"
"輸入的文字，畫面就會更新到最合乎搜尋字串的位置。\n"
"\n"
" 前次搜尋的字串將會顯示在 搜尋: 提示符號後面的括號中。不輸入任何文字 而直接按"
"下輸入鍵則會履行前次的搜尋。"

#: src/help.c:311
msgid ""
"If you have selected text with the mark and then search to replace, only "
"matches in the selected text will be replaced.\n"
"\n"
" The following function keys are available in Search mode:\n"
"\n"
msgstr ""
"如果您已經用標記選擇了一段文字 並進行搜尋替換，就只有在選擇文字中符合者將會被"
"替換。\n"
"\n"
" 以下的功能鍵可用於搜尋模式:\n"
"\n"

#: src/help.c:317
msgid ""
"Go To Line Help Text\n"
"\n"
" Enter the line number that you wish to go to and hit Enter.  If there are "
"fewer lines of text than the number you entered, you will be brought to the "
"last line of the file.\n"
"\n"
" The following function keys are available in Go To Line mode:\n"
"\n"
msgstr ""
"跳列輔助說明\n"
"\n"
" 首先輸入您想去的列數編號並按下輸入鍵 (Enter)。如果文章中的列數比您所輸 入要"
"少，您將會被帶至檔案的最後一列。\n"
"\n"
" 以下的功能鍵可用於跳列模式: \n"
"\n"

#: src/help.c:326
msgid ""
"Insert File Help Text\n"
"\n"
" Type in the name of a file to be inserted into the current file buffer at "
"the current cursor location.\n"
"\n"
" If you have compiled nano with multiple file buffer support, and enable "
"multiple file buffers with the -F or --multibuffer command line flags, the "
"Meta-F toggle, or a nanorc file, inserting a file will cause it to be loaded "
"into a separate buffer (use Meta-< and > to switch between file buffers).  "
msgstr ""
"插入檔案輔助說明\n"
"\n"
" 先把檔案的名稱鍵入，它將會插入在目前緩衝區的游標所在之處。\n"
"\n"
" 如果您所編譯的 nano 支援多重檔案緩衝區，並且將此功能以命令列旗標 -F 或 --"
"multibuffer、Meta-F 開關，或者 nanorc 檔案來啟動的話，所插入的檔案 將會被載入"
"另外的緩衝區中 (利用 Meta-< 和 > 在檔案緩衝區間切換)。 "

#: src/help.c:335
msgid ""
"If you need another blank buffer, do not enter any filename, or type in a "
"nonexistent filename at the prompt and press Enter.\n"
"\n"
" The following function keys are available in Insert File mode:\n"
"\n"
msgstr ""
"如果您需要另一個空的緩衝區，那就不要輸入任何檔名，或是在提示符號後鍵 入一個不"
"存在的檔名，然後按下輸入鍵。\n"
"\n"
" 以下的功能鍵可用於插入檔案模式:\n"
"\n"

#: src/help.c:341
msgid ""
"Write File Help Text\n"
"\n"
" Type the name that you wish to save the current file as and press Enter to "
"save the file.\n"
"\n"
" If you have selected text with the mark, you will be prompted to save only "
"the selected portion to a separate file.  To reduce the chance of "
"overwriting the current file with just a portion of it, the current filename "
"is not the default in this mode.\n"
"\n"
" The following function keys are available in Write File mode:\n"
"\n"
msgstr ""
"寫入檔案輔助說明\n"
"\n"
" 先鍵入您想要以此來儲存目前檔案的名稱，並按下輸入鍵來儲存檔案。\n"
"\n"
" 如果已經用標記選擇了文字，那麼您將會被提示，只儲存標記部分到另外的檔 案。為"
"了降低目前檔案只被其中部分覆寫的機會，在此模式下，目前的檔名不會 成為預設"
"值。\n"
"\n"
" 以下的功能鍵可用於寫入檔案模式: \n"
"\n"

#: src/help.c:355
msgid ""
"File Browser Help Text\n"
"\n"
" The file browser is used to visually browse the directory structure to "
"select a file for reading or writing.  You may use the arrow keys or Page Up/"
"Down to browse through the files, and S or Enter to choose the selected file "
"or enter the selected directory.  To move up one level, select the directory "
"called \"..\" at the top of the file list.\n"
"\n"
" The following function keys are available in the file browser:\n"
"\n"
msgstr ""
"檔案選單輔助說明\n"
"\n"
" 檔案選單是用來視覺化瀏覽目錄結構，以選取要讀出或寫入的檔案。您可以 使用上下"
"左右鍵或上頁/下頁來瀏覽，並用 S 或輸入鍵來選取所要的檔案或者 進入所選的目錄。"
"要跳到上層時，選擇在檔案列表頂端名為 \"..\" 的目錄。\n"
"\n"
" 以下的功能鍵可用於檔案選單: \n"
"\n"

#: src/help.c:368
msgid ""
"Browser Search Command Help Text\n"
"\n"
" Enter the words or characters you would like to search for, and then press "
"Enter.  If there is a match for the text you entered, the screen will be "
"updated to the location of the nearest match for the search string.\n"
"\n"
" The previous search string will be shown in brackets after the search "
"prompt.  Hitting Enter without entering any text will perform the previous "
"search.\n"
"\n"
msgstr ""
"搜尋命令輔助說明\n"
"\n"
" 首先輸入您想要搜尋的字串或字元，然後按下輸入鍵 (Enter)。如果存在著 符合您所"
"輸入的文字，畫面就會更新到最合乎搜尋字串的位置。\n"
"\n"
" 前次搜尋的字串將會顯示在 搜尋: 提示符號後面的括號中。不輸入任何文字 而直接按"
"下輸入鍵則會履行前次的搜尋。\n"
"\n"

#: src/help.c:377
msgid ""
" The following function keys are available in Browser Search mode:\n"
"\n"
msgstr ""
" 下列功能鍵可用於瀏覽器搜尋模式：\n"
"\n"

#: src/help.c:381
msgid ""
"Browser Go To Directory Help Text\n"
"\n"
" Enter the name of the directory you would like to browse to.\n"
"\n"
" If tab completion has not been disabled, you can use the Tab key to "
"(attempt to) automatically complete the directory name.\n"
"\n"
" The following function keys are available in Browser Go To Directory mode:\n"
"\n"
msgstr ""
"跳至目錄輔助說明\n"
"\n"
" 先輸入您想要瀏覽的目錄名稱。\n"
"\n"
" 如果跳格補正的功能沒有被關閉，您可以利用跳格鍵 (TAB) 去 (嘗試) 自動 補正目錄"
"名稱。\n"
"\n"
" 以下的功能鍵可用於跳至目錄模式: \n"
"\n"

#: src/help.c:394
msgid ""
"Spell Check Help Text\n"
"\n"
" The spell checker checks the spelling of all text in the current file.  "
"When an unknown word is encountered, it is highlighted and a replacement can "
"be edited.  It will then prompt to replace every instance of the given "
"misspelled word in the current file, or, if you have selected text with the "
"mark, in the selected text.\n"
"\n"
" The following function keys are available in Spell Check mode:\n"
"\n"
msgstr ""
"拼字檢查輔助說明\n"
"\n"
" 拼字檢查程式會檢查目前檔案中所有文字的拼法。當遇到一個未知的字，它會 被標記"
"起來，並讓您編輯替代文字。對於目前檔案中每一個拼錯的字，都會顯示 置換的提示；"
"或者，如果已經用標記選擇了文字的話，那就只作用於選取的文字 之中。\n"
"\n"
" 以下的功能鍵可用於拼字檢查模式: \n"
"\n"

#: src/help.c:409
msgid ""
"Execute Command Help Text\n"
"\n"
" This mode allows you to insert the output of a command run by the shell "
"into the current buffer (or a new buffer in multiple file buffer mode).  If "
"you need another blank buffer, do not enter any command.\n"
"\n"
" The following function keys are available in Execute Command mode:\n"
"\n"
msgstr ""
"執行命令輔助說明\n"
"\n"
" 本選單允許您將 shell 執行的命令輸出結果，插入目前的緩衝區 (或是多重緩衝 區模"
"式下的新緩衝區)。如果您需要另一個空白緩衝區，就不要輸入任何命令。\n"
"\n"
" 以下的功能鍵可用於執行命令模式: \n"
"\n"

#: src/help.c:422
msgid ""
"Main nano help text\n"
"\n"
" The nano editor is designed to emulate the functionality and ease-of-use of "
"the UW Pico text editor.  There are four main sections of the editor.  The "
"top line shows the program version, the current filename being edited, and "
"whether or not the file has been modified.  Next is the main editor window "
"showing the file being edited.  The status line is the third line from the "
"bottom and shows important messages.  "
msgstr ""
"nano 輔助說明\n"
"\n"
" nano 編輯器是設計來在功能性及易用性方面，模仿華盛頓大學的 Pico 文字 編輯器。"
"它含有四個主要部分:頂列顯示程式版本、目前被編輯的檔案名稱， 以及是否這檔案已"
"經更動過。接著是主要編輯區，顯示正在編輯的檔案。狀態 列位於倒數第三列，用來顯"
"示重要的訊息。\n"
"\n"
" "

#: src/help.c:432
#, fuzzy
msgid ""
"The bottom two lines show the most commonly used shortcuts in the editor.\n"
"\n"
" Shortcuts are written as follows: Control-key sequences are notated with a "
"'^' and can be entered either by using the Ctrl key or pressing the Esc key "
"twice.  Meta-key sequences are notated with 'M-' and can be entered using "
"either the Alt, Cmd, or Esc key, depending on your keyboard setup.  "
msgstr ""
"底部的兩列顯示編輯器中最常用 到的快捷鍵。\n"
"快捷鍵的記號定義如下：控制鍵組 (Control-key) 序列是以一個 \"帽子\" (caret, "
"^) 符號來表示，它可以藉由控制鍵 (Ctrl) 或是按兩次脫離鍵 (Esc) 來輸入。脫離鍵"
"組 (Escape-key) 序列是以 \"中介\" (Meta, M) 符號表示，它 可以依照您的鍵盤設"
"定，利用 Esc，Alt 或 Meta 來輸入。"

#: src/help.c:439
msgid ""
"Also, pressing Esc twice and then typing a three-digit decimal number from "
"000 to 255 will enter the character with the corresponding value.  The "
"following keystrokes are available in the main editor window.  Alternative "
"keys are shown in parentheses:\n"
"\n"
msgstr ""
"另外，按 Esc 兩次 之後再鍵入從 000 到 255 之間的三位數字，則會輸入該 ASCII 碼"
"對應的字 元。下列按鍵組合可用於主要編輯區，替代按鍵則顯示於括弧內:\n"
"\n"

#: src/help.c:471 src/help.c:552
msgid "enable/disable"
msgstr "開啟/關閉"

#: src/history.c:240
#, c-format
msgid ""
"\n"
"Press Enter to continue\n"
msgstr ""
"\n"
"按下輸入鍵以繼續\n"

#: src/history.c:283
#, fuzzy, c-format
msgid ""
"Unable to create directory %s: %s\n"
"It is required for saving/loading search history or cursor positions.\n"
msgstr ""
"無法建立目錄 %s：%s\n"
"對於儲存/載入搜尋歷史或游標位置而言，它是必要的\n"

#: src/history.c:290
#, fuzzy, c-format
msgid ""
"Path %s is not a directory and needs to be.\n"
"Nano will be unable to load or save search history or cursor positions.\n"
msgstr ""
"路徑 %s 並非卻必須是個目錄。\n"
"Nano 將無法載入或儲存搜尋或游標位置歷史\n"

#: src/history.c:380 src/history.c:389 src/history.c:471 src/history.c:493
#, fuzzy, c-format
msgid "Error writing %s: %s\n"
msgstr "寫入 %s 時發生錯誤: %s"

#: src/nano.c:534
#, fuzzy
msgid "Key is invalid in view mode"
msgstr "觀看模式中此按鍵無效"

#: src/nano.c:540
#, fuzzy
msgid "This function is disabled in restricted mode"
msgstr "在限制模式中無法至 %s 外部"

#: src/nano.c:548
msgid "Help is not available"
msgstr ""

#: src/nano.c:659
#, c-format
msgid ""
"\n"
"Buffer written to %s\n"
msgstr ""
"\n"
"緩衝區已寫入 %s\n"

#: src/nano.c:661
#, c-format
msgid ""
"\n"
"Buffer not written to %s: %s\n"
msgstr ""
"\n"
"緩衝區未寫入至 %s: %s\n"

#: src/nano.c:664
#, c-format
msgid ""
"\n"
"Buffer not written: %s\n"
msgstr ""
"\n"
"緩衝區未寫入: %s\n"

#: src/nano.c:778
#, fuzzy, c-format
msgid ""
"Usage: nano [OPTIONS] [[+LINE[,COLUMN]] FILE]...\n"
"\n"
msgstr ""
"用法: nano [選項] [[+列數,行數] 檔案名稱]…\n"
"\n"

#. TRANSLATORS: The next two strings are part of the --help output.
#. * It's best to keep its lines within 80 characters.
#: src/nano.c:781
#, c-format
msgid ""
"To place the cursor on a specific line of a file, put the line number with\n"
"a '+' before the filename.  The column number can be added after a comma.\n"
msgstr ""

#: src/nano.c:783
#, c-format
msgid ""
"When a filename is '-', nano reads data from standard input.\n"
"\n"
msgstr ""

#: src/nano.c:784
#, c-format
msgid "Option\t\tGNU long option\t\tMeaning\n"
msgstr "選項\t\tGNU 長選項\t\t意義\n"

#. TRANSLATORS: The next forty or so strings are option descriptions
#. * for the --help output.  Try to keep them at most 40 characters.
#: src/nano.c:789
msgid "Enable smart home key"
msgstr "開啟智慧型 HOME 按鍵功能"

#: src/nano.c:791
msgid "Save backups of existing files"
msgstr "儲存既有檔案的備份"

#: src/nano.c:792
msgid "-C <dir>"
msgstr "-C <目錄>"

#: src/nano.c:792
msgid "--backupdir=<dir>"
msgstr "--backupdir=<目錄>"

#: src/nano.c:793
msgid "Directory for saving unique backup files"
msgstr "用以儲存獨一備份檔案的目錄"

#: src/nano.c:796
msgid "Use bold instead of reverse video text"
msgstr "使用粗體以代替反白顯示文字"

#: src/nano.c:798
msgid "Convert typed tabs to spaces"
msgstr "將已輸入的跳格符號轉換為空白"

#: src/nano.c:803
msgid "Read a file into a new buffer by default"
msgstr ""

#: src/nano.c:806
msgid "Use (vim-style) lock files"
msgstr "使用 (vim 形式) 鎖定檔案"

#: src/nano.c:811
msgid "Log & read search/replace string history"
msgstr "記錄與讀取 搜尋/置換 的歷史字串"

#: src/nano.c:815
msgid "Don't look at nanorc files"
msgstr "不要參考 nanorc 檔案"

#: src/nano.c:818
msgid "Fix numeric keypad key confusion problem"
msgstr "修正數字鍵區按鍵混淆問題"

#: src/nano.c:820
msgid "Don't add newlines to the ends of files"
msgstr "不要將換列加到檔案末端"

#: src/nano.c:823
msgid "Don't convert files from DOS/Mac format"
msgstr "不要從 DOS/Mac 格式轉檔"

#: src/nano.c:825
msgid "Use one more line for editing"
msgstr "編輯時多使用一列"

#: src/nano.c:829
msgid "Log & read location of cursor position"
msgstr "記錄 & 讀取游標所在位置"

#: src/nano.c:832
msgid "-Q <str>"
msgstr "-Q <字串>"

#: src/nano.c:832
msgid "--quotestr=<str>"
msgstr "--quotestr=<字串>"

#: src/nano.c:832
msgid "Quoting string"
msgstr "引用代表字串"

#: src/nano.c:835
msgid "Restricted mode"
msgstr "限制模式"

#: src/nano.c:837
msgid "Scroll by line instead of half-screen"
msgstr "逐列捲動以代替半個畫面"

#: src/nano.c:839
msgid "-T <#cols>"
msgstr "-T <#行數>"

#: src/nano.c:839
msgid "--tabsize=<#cols>"
msgstr "--tabsize=<#行數>"

#: src/nano.c:840
msgid "Set width of a tab to #cols columns"
msgstr "設定跳格寬度為 #行數"

#: src/nano.c:841
msgid "Do quick statusbar blanking"
msgstr "狀態列快速閃動"

#: src/nano.c:842
msgid "Print version information and exit"
msgstr "顯示版本資訊並離開"

#: src/nano.c:845
msgid "Detect word boundaries more accurately"
msgstr "更正確地偵測單字邊界"

#: src/nano.c:846
#, fuzzy
msgid "-X <str>"
msgstr "-Q <字串>"

#: src/nano.c:846
#, fuzzy
msgid "--wordchars=<str>"
msgstr "--quotestr=<字串>"

#: src/nano.c:847
msgid "Which other characters are word parts"
msgstr ""

#: src/nano.c:851
msgid "-Y <name>"
msgstr ""

#: src/nano.c:851
#, fuzzy
msgid "--syntax=<name>"
msgstr "--syntax=<字串>"

#: src/nano.c:852
msgid "Syntax definition to use for coloring"
msgstr "用於顏色的語法定義"

#: src/nano.c:855
msgid "When soft-wrapping, do it at whitespace"
msgstr ""

#: src/nano.c:857
msgid "Constantly show cursor position"
msgstr "持續顯示游標位置"

#: src/nano.c:859
msgid "Fix Backspace/Delete confusion problem"
msgstr "修正 退格鍵/刪除鍵 混淆問題"

#: src/nano.c:862
#, fuzzy
msgid "Show cursor in file browser"
msgstr "呼叫檔案選單"

#: src/nano.c:864
#, fuzzy
msgid "Show this help text and exit"
msgstr "顯示這份說明文字"

#: src/nano.c:866
msgid "Automatically indent new lines"
msgstr "自動縮排新列"

#: src/nano.c:867
msgid "Cut from cursor to end of line"
msgstr "從游標剪下至列尾"

#: src/nano.c:870
msgid "Show line numbers in front of the text"
msgstr ""

#: src/nano.c:873
msgid "Enable the use of the mouse"
msgstr "開啟滑鼠功能"

#: src/nano.c:875
msgid "Do not read the file (only write it)"
msgstr ""

#: src/nano.c:877
msgid "-o <dir>"
msgstr "-o <目錄>"

#: src/nano.c:877
msgid "--operatingdir=<dir>"
msgstr "--operatingdir=<目錄>"

#: src/nano.c:878
msgid "Set operating directory"
msgstr "設定操作目錄"

#: src/nano.c:880
msgid "Preserve XON (^Q) and XOFF (^S) keys"
msgstr "保留 XON (^Q) 和 XOFF (^S) 按鍵"

#: src/nano.c:882
msgid "-r <#cols>"
msgstr "-r <#行數>"

#: src/nano.c:882
msgid "--fill=<#cols>"
msgstr "--fill=<#行數>"

#: src/nano.c:883
#, fuzzy
msgid "Set hard-wrapping point at column #cols"
msgstr "設定換列點為 #行數"

#: src/nano.c:887
msgid "-s <prog>"
msgstr "-s <程式>"

#: src/nano.c:887
msgid "--speller=<prog>"
msgstr "--speller=<程式>"

#: src/nano.c:888
msgid "Enable alternate speller"
msgstr "啟用替代的拼字檢查程式"

#: src/nano.c:890
msgid "Auto save on exit, don't prompt"
msgstr "離開時自動儲存，不要提示"

#: src/nano.c:892
msgid "Save a file by default in Unix format"
msgstr ""

#: src/nano.c:894
msgid "View mode (read-only)"
msgstr "觀看模式 (唯讀)"

#: src/nano.c:896
#, fuzzy
msgid "Don't hard-wrap long lines"
msgstr "不要自動換列"

#: src/nano.c:898
msgid "Don't show the two help lines"
msgstr "不要顯示兩說明列"

#: src/nano.c:900
msgid "Enable suspension"
msgstr "開啟懸置功能"

#: src/nano.c:902
msgid "Enable soft line wrapping"
msgstr "開啟長列換列"

#: src/nano.c:914
#, fuzzy, c-format
msgid " GNU nano, version %s\n"
msgstr " GNU nano 版本 %s (編譯於 %s, %s)\n"

#: src/nano.c:917
#, c-format
msgid " (C) 2014-%s the contributors to nano\n"
msgstr ""

#: src/nano.c:918
#, fuzzy, c-format
msgid " Email: nano@nano-editor.org\tWeb: https://nano-editor.org/"
msgstr " 電子郵件: nano@nano-editor.org\t\t網頁: http://www.nano-editor.org/"

#: src/nano.c:919
#, c-format
msgid ""
"\n"
" Compiled options:"
msgstr ""
"\n"
" 編譯選項:"

#: src/nano.c:1065
msgid "No file name"
msgstr ""

#: src/nano.c:1067
msgid "Save modified buffer?  (Answering \"No\" will DISCARD changes.) "
msgstr ""

#: src/nano.c:1124
#, c-format
msgid "Reading from stdin, ^C to abort\n"
msgstr "讀取自標準輸入，^C 以放棄\n"

#: src/nano.c:1151
#, c-format
msgid "Failed to open stdin: %s"
msgstr ""

#: src/nano.c:1163
msgid "Couldn't reopen stdin from keyboard, sorry\n"
msgstr "無法重新開啟來自鍵盤的標準輸入，抱歉\n"

#: src/nano.c:1232
msgid "Received SIGHUP or SIGTERM\n"
msgstr "接收到 SIGHUP 或 SIGTERM\n"

#: src/nano.c:1247
#, c-format
msgid "Use \"fg\" to return to nano.\n"
msgstr "利用 \"fg\" 來回到 nano。\n"

#: src/nano.c:1265
msgid "Suspension is not enabled"
msgstr ""

#: src/nano.c:1410
msgid "enabled"
msgstr "開啟"

#: src/nano.c:1410
msgid "disabled"
msgstr "關閉"

#: src/nano.c:1547
msgid "Unbound key"
msgstr ""

#: src/nano.c:1550
msgid "Unbindable key: M-["
msgstr ""

#: src/nano.c:1552
#, c-format
msgid "Unbound key: M-%c"
msgstr ""

#: src/nano.c:1554
#, c-format
msgid "Unbound key: ^%c"
msgstr ""

#: src/nano.c:1556
#, c-format
msgid "Unbound key: %c"
msgstr ""

#: src/nano.c:2111 src/rcfile.c:1173
#, c-format
msgid "Requested tab size \"%s\" is invalid"
msgstr "所要求的跳格寬度 \"%s\" 無效"

#: src/nano.c:2180 src/rcfile.c:1110
#, c-format
msgid "Requested fill size \"%s\" is invalid"
msgstr "所要求的填滿行數 \"%s\" 無效"

#: src/nano.c:2236
#, c-format
msgid "Type '%s -h' for a list of available options.\n"
msgstr ""

#: src/nano.c:2558 src/search.c:833
msgid "Invalid line or column number"
msgstr "無效的列號或行號"

#: src/nano.c:2605
#, c-format
msgid "Mistakes in '%s'"
msgstr ""

#. TRANSLATORS: For the next three strings, if possible, specify
#. * the single-byte letters for both your language and English.
#. * For example, in French: "OoYy", for both "Oui" and "Yes".
#: src/prompt.c:677
msgid "Yy"
msgstr "Yy"

#: src/prompt.c:678
msgid "Nn"
msgstr "Nn"

#: src/prompt.c:679
msgid "Aa"
msgstr "Aa"

#: src/prompt.c:701
msgid "Yes"
msgstr "是"

#: src/prompt.c:706
msgid "All"
msgstr "全部"

#: src/prompt.c:711
msgid "No"
msgstr "否"

#: src/rcfile.c:149
#, fuzzy, c-format
msgid "Error in %s on line %zu: "
msgstr "在 %s (位於第 %lu 列) 中發生錯誤: "

#: src/rcfile.c:207
#, c-format
msgid "Argument '%s' has an unterminated \""
msgstr "引數 '%s' 有未封閉的 \""

#: src/rcfile.c:235 src/rcfile.c:669 src/rcfile.c:721 src/rcfile.c:814
msgid "Regex strings must begin and end with a \" character"
msgstr "正規表示式字串必須以 \" 字元開始及結束"

#: src/rcfile.c:261 src/search.c:47
#, c-format
msgid "Bad regex \"%s\": %s"
msgstr "不良的正規表示式 \"%s\": %s"

#: src/rcfile.c:283
msgid "Missing syntax name"
msgstr "缺少語法名稱"

#: src/rcfile.c:292
msgid "A syntax name must be quoted"
msgstr ""

#: src/rcfile.c:301
msgid "The \"none\" syntax is reserved"
msgstr "\"none\" 語法已被保留"

#: src/rcfile.c:333
#, fuzzy
msgid "The \"default\" syntax does not accept extensions"
msgstr "\"default\" 語法必須不含任何副檔名"

#: src/rcfile.c:375
msgid "Missing key name"
msgstr "缺少語法名稱"

#: src/rcfile.c:384 src/rcfile.c:395
msgid "Key name is too short"
msgstr ""

#: src/rcfile.c:405
#, fuzzy
msgid "Key name must begin with \"^\", \"M\", or \"F\""
msgstr "按鍵繫結必須以 \"^\", \"M\", 或 \"F\" 開始"

#: src/rcfile.c:408
#, fuzzy, c-format
msgid "Key name %s is invalid"
msgstr "所要求的跳格寬度 \"%s\" 無效"

#: src/rcfile.c:417
#, fuzzy
msgid "Must specify a function to bind the key to"
msgstr "必須指定按鍵所繫結的功能"

#. TRANSLATORS: Do not translate the word "all".
#: src/rcfile.c:427
msgid "Must specify a menu (or \"all\") in which to bind/unbind the key"
msgstr ""

#: src/rcfile.c:434
#, fuzzy, c-format
msgid "Cannot map name \"%s\" to a function"
msgstr "無法映射名稱「%s」到某一功能"

#: src/rcfile.c:441
#, fuzzy, c-format
msgid "Cannot map name \"%s\" to a menu"
msgstr "無法映射名稱「%s」到某一選單"

#: src/rcfile.c:467
#, c-format
msgid "Function '%s' does not exist in menu '%s'"
msgstr ""

#: src/rcfile.c:476
#, fuzzy, c-format
msgid "Sorry, keystroke \"%s\" may not be rebound"
msgstr "抱歉，按鍵字串「%s」是不合法的繫結"

#: src/rcfile.c:576
#, fuzzy, c-format
msgid "Error expanding %s: %s"
msgstr "讀取 %s 時發生錯誤: %s"

#: src/rcfile.c:613
#, c-format
msgid ""
"Color \"%s\" not understood.\n"
"Valid colors are \"green\", \"red\", \"blue\",\n"
"\"white\", \"yellow\", \"cyan\", \"magenta\" and\n"
"\"black\", with the optional prefix \"bright\"\n"
"for foreground colors."
msgstr ""
"顏色 \"%s\" 無法辨識。\n"
"有效的顏色是 \"green\"(綠)、\"red\"(紅)、\"blue\"(藍)、\n"
"\"white\"(白)、\"yellow\"(黃)、\"cyan\"(青)、\"magenta\"(瑰) 和 \n"
"\"black\"(黑)，加上選擇性的前置字 \"bright\"(明亮) \n"
"可用於前景色。"

#: src/rcfile.c:632 src/rcfile.c:785 src/rcfile.c:848
#, c-format
msgid "A '%s' command requires a preceding 'syntax' command"
msgstr ""

#: src/rcfile.c:638
msgid "Missing color name"
msgstr "缺少顏色名稱"

#: src/rcfile.c:648 src/rcfile.c:797
#, fuzzy, c-format
msgid "Missing regex string after '%s' command"
msgstr "缺少正規表示式字串"

#: src/rcfile.c:680 src/rcfile.c:731
#, fuzzy
msgid "Empty regex string"
msgstr "缺少正規表示式字串"

#: src/rcfile.c:715
msgid "\"start=\" requires a corresponding \"end=\""
msgstr "\"start=\" 要求對應的 \"end=\""

#: src/rcfile.c:758
#, fuzzy
msgid "A background color cannot be bright"
msgstr "背景色 \"%s\" 不可為明亮"

#: src/rcfile.c:792
#, fuzzy, c-format
msgid "The \"default\" syntax does not accept '%s' regexes"
msgstr "\"default\" 語法必須不含任何副檔名"

#: src/rcfile.c:853
#, c-format
msgid "Missing argument after '%s'"
msgstr ""

#: src/rcfile.c:865
#, fuzzy, c-format
msgid "Argument of '%s' lacks closing \""
msgstr "引數 '%s' 有未封閉的 \""

#: src/rcfile.c:891
#, fuzzy, c-format
msgid "Fatal error: no keys mapped for function \"%s\".  Exiting.\n"
msgstr "嚴重錯誤：沒有按鍵映射至功能「%s」"

#: src/rcfile.c:893
#, fuzzy, c-format
msgid ""
"If needed, use nano with the -I option to adjust your nanorc settings.\n"
msgstr "離開中。 如果需要調整您的 nanorc 設定值，請使用 nano 與 -I 選項\n"

#: src/rcfile.c:948
#, fuzzy, c-format
msgid "Could not find syntax \"%s\" to extend"
msgstr "無法映射名稱「%s」到某一選單"

#: src/rcfile.c:970 src/rcfile.c:1184
#, c-format
msgid "Syntax \"%s\" has no color commands"
msgstr "語法「%s」沒有任何顏色命令"

#: src/rcfile.c:1001
#, c-format
msgid "Command \"%s\" not allowed in included file"
msgstr "命令「%s」在包含的檔案中不允許"

#: src/rcfile.c:1016
#, c-format
msgid "Command \"%s\" not understood"
msgstr "無法辨識 \"%s\" 命令"

#: src/rcfile.c:1028
#, fuzzy
msgid "Missing option"
msgstr "缺少顏色名稱"

#: src/rcfile.c:1042
#, fuzzy, c-format
msgid "Unknown option \"%s\""
msgstr "旗標 \"%s\" 無法辨識"

#: src/rcfile.c:1055
#, fuzzy, c-format
msgid "Cannot unset option \"%s\""
msgstr "無法解除旗標 \"%s\" 設定"

#: src/rcfile.c:1067
#, c-format
msgid "Option \"%s\" requires an argument"
msgstr "選項 \"%s\" 要求引數"

#: src/rcfile.c:1083
#, fuzzy
msgid "Argument is not a valid multibyte string"
msgstr "選項並非正確的多位元字串"

#: src/rcfile.c:1122 src/rcfile.c:1143 src/rcfile.c:1150
msgid "Non-blank characters required"
msgstr "需要非空格字元"

#: src/rcfile.c:1129
msgid "Two single-column characters required"
msgstr "需要兩個單行字元"

#: src/rcfile.c:1259
msgid "I can't find my home directory!  Wah!"
msgstr "我找不到我的家目錄！哇！"

#: src/search.c:74
#, c-format
msgid "\"%.*s%s\" not found"
msgstr "找不到 \"%.*s%s\""

#. TRANSLATORS: The next three modify the search prompt.
#: src/search.c:138
msgid " [Case Sensitive]"
msgstr " [符合大小寫]"

#: src/search.c:139
msgid " [Regexp]"
msgstr " [正規表示式]"

#: src/search.c:140
msgid " [Backwards]"
msgstr " [向後搜尋]"

#. TRANSLATORS: The next two modify the search prompt.
#: src/search.c:143
msgid " (to replace) in selection"
msgstr " 在標記中(置換)"

#: src/search.c:145
msgid " (to replace)"
msgstr " (置換)"

#. TRANSLATORS: This is shown when searching takes
#. * more than half a second.
#: src/search.c:250
#, fuzzy
msgid "Searching..."
msgstr "搜尋"

#. TRANSLATORS: This is a prompt.
#: src/search.c:617
msgid "Replace this instance?"
msgstr "置換這個？"

#. TRANSLATORS: This is a prompt.
#: src/search.c:747
msgid "Replace with"
msgstr "以此置換"

#: src/search.c:779
#, fuzzy, c-format
msgid "Replaced %zd occurrence"
msgid_plural "Replaced %zd occurrences"
msgstr[0] "已置換 %lu 處"

#. TRANSLATORS: This is a prompt.
#: src/search.c:811
msgid "Enter line number, column number"
msgstr "輸入列號，行號"

#: src/search.c:1001
msgid "Not a bracket"
msgstr "並非一個括號"

#: src/search.c:1062
msgid "No matching bracket"
msgstr "無對應括號"

#: src/text.c:63
msgid "Mark Set"
msgstr "標記設定"

#: src/text.c:67
msgid "Mark Unset"
msgstr "標記解除"

#: src/text.c:77
#, c-format
msgid "Error invoking \"%s\""
msgstr "呼叫 \"%s\" 錯誤"

#: src/text.c:492
msgid "Commenting is not supported for this file type"
msgstr ""

#: src/text.c:502
msgid "Cannot comment past end of file"
msgstr ""

#: src/text.c:687
msgid "Nothing in undo buffer!"
msgstr "復原緩衝區中沒有任何東西！"

#. TRANSLATORS: The next twelve strings describe actions
#. * that are undone or redone.  It are all nouns, not verbs.
#: src/text.c:705 src/text.c:736 src/text.c:880 src/text.c:923
msgid "text add"
msgstr "文字加入"

#: src/text.c:717 src/text.c:893
msgid "text delete"
msgstr "文字刪除"

#: src/text.c:740 src/text.c:931
msgid "line join"
msgstr "列聯結"

#: src/text.c:759 src/text.c:947
msgid "text cut"
msgstr "文字剪下"

#: src/text.c:764 src/text.c:951
msgid "text uncut"
msgstr "文字取消剪下"

#: src/text.c:773 src/text.c:902
msgid "line break"
msgstr "分列符號"

#: src/text.c:784 src/text.c:970
#, fuzzy
msgid "indent"
msgstr "自動縮排"

#: src/text.c:788 src/text.c:974
#, fuzzy
msgid "unindent"
msgstr "自動縮排"

#: src/text.c:793 src/text.c:979
msgid "comment"
msgstr ""

#: src/text.c:797 src/text.c:983
msgid "uncomment"
msgstr ""

#: src/text.c:801 src/text.c:962
msgid "text insert"
msgstr "文字插入"

#: src/text.c:817 src/text.c:955
msgid "text replace"
msgstr "文字置換"

#: src/text.c:829
#, c-format
msgid "Undid action (%s)"
msgstr "已復原動作 (%s)"

#: src/text.c:856
msgid "Nothing to re-do!"
msgstr "沒有任何東西可重做！"

#: src/text.c:992
#, c-format
msgid "Redid action (%s)"
msgstr "已重做動作 (%s)"

#: src/text.c:1097 src/text.c:2668 src/text.c:3054
msgid "Could not create pipe"
msgstr "無法建立管線功能"

#: src/text.c:1123 src/text.c:2755 src/text.c:2882 src/text.c:3102
#: src/text.c:3407
msgid "Could not fork"
msgstr "執行功能無效"

#: src/text.c:2085
#, c-format
msgid "Bad quote string %s: %s"
msgstr "不良引用字串 %s: %s"

#: src/text.c:2440
msgid "Can now UnJustify!"
msgstr "現在可以還原對齊！"

#: src/text.c:2588
#, c-format
msgid "Unfindable word: %s"
msgstr ""

#: src/text.c:2607
msgid "Edit a replacement"
msgstr "編輯替代文字"

#. TRANSLATORS: Shown after fixing misspellings in one word.
#: src/text.c:2616
#, fuzzy
msgid "Next word..."
msgstr "後一個字"

#: src/text.c:2670
msgid "Creating misspelled word list, please wait..."
msgstr "正在建立錯字列表，請稍待…"

#: src/text.c:2761 src/text.c:3109
msgid "Could not get size of pipe buffer"
msgstr "無法得知管線緩衝區大小"

#: src/text.c:2810
msgid "Error invoking \"spell\""
msgstr "呼叫 \"spell\" 錯誤"

#: src/text.c:2813
msgid "Error invoking \"sort -f\""
msgstr "呼叫 \"sort -f\" 錯誤"

#: src/text.c:2816
msgid "Error invoking \"uniq\""
msgstr "呼叫 \"uniq\" 錯誤"

#: src/text.c:2991
#, fuzzy
msgid "Invoking spell checker, please wait"
msgstr "嘗試呼叫拼字檢查"

#: src/text.c:3005
#, c-format
msgid "Spell checking failed: %s"
msgstr "拼字檢查失敗: %s"

#: src/text.c:3007
#, c-format
msgid "Spell checking failed: %s: %s"
msgstr "拼字檢查失敗: %s: %s"

#: src/text.c:3010
msgid "Finished checking spelling"
msgstr "拼字檢查結束"

#: src/text.c:3034
#, fuzzy
msgid "No linter defined for this type of file!"
msgstr "不要將換列加到檔案末端"

#: src/text.c:3042
msgid "Save modified buffer before linting?"
msgstr ""

#: src/text.c:3059
msgid "Invoking linter, please wait"
msgstr ""

#: src/text.c:3203
#, c-format
msgid "Got 0 parsable lines from command: %s"
msgstr ""

#: src/text.c:3233
#, c-format
msgid "This message is for unopened file %s, open it in a new buffer?"
msgstr ""

#: src/text.c:3269
msgid "No more errors in unopened files, cancelling"
msgstr ""

#: src/text.c:3314
#, fuzzy
msgid "At last message"
msgstr "顯示此訊息"

#: src/text.c:3319
#, fuzzy
msgid "At first message"
msgstr "顯示此訊息"

#: src/text.c:3356
msgid "Finished"
msgstr ""

#: src/text.c:3380
msgid "Invoking formatter, please wait"
msgstr ""

#: src/text.c:3441
msgid "Finished formatting"
msgstr ""

#: src/text.c:3523
#, fuzzy, c-format
msgid "%sWords: %zu  Lines: %zd  Chars: %zu"
msgstr "%s字數: %lu  列數: %ld  字元數: %lu"

#: src/text.c:3524
msgid "In Selection:  "
msgstr "於選擇部分: "

#. TRANSLATORS: This is displayed when the next keystroke will be
#. * inserted verbatim.
#: src/text.c:3537
msgid "Verbatim Input"
msgstr "原形輸入"

#: src/text.c:3729
msgid "No further matches"
msgstr ""

#. TRANSLATORS: Shown when there are zero possible completions.
#: src/text.c:3733
#, fuzzy
msgid "No matches"
msgstr "無對應括號"

#: src/utils.c:357 src/utils.c:369
msgid "nano is out of memory!"
msgstr "nano 已耗盡記憶體！"

#: src/winio.c:85
msgid "Recording a macro..."
msgstr ""

#: src/winio.c:88
msgid "Stopped recording"
msgstr ""

#: src/winio.c:99
msgid "Cannot run macro while recording"
msgstr ""

#: src/winio.c:105
msgid "Macro is empty"
msgstr ""

#: src/winio.c:211
msgid "Too many errors from stdin"
msgstr ""

#. TRANSLATORS: This refers to a sequence of escape codes
#. * (from the keyboard) that nano does not recogize.
#: src/winio.c:1283
msgid "Unknown sequence"
msgstr ""

#. TRANSLATORS: This is shown while a six-digit hexadecimal
#. * Unicode character code (%s) is being typed in.
#: src/winio.c:1441
#, fuzzy, c-format
msgid "Unicode Input: %s"
msgstr "萬國碼輸入"

#: src/winio.c:2051
msgid "DIR:"
msgstr "目錄:"

#: src/winio.c:2070 src/winio.c:2074
msgid "Modified"
msgstr "已更動"

#: src/winio.c:2072
msgid "View"
msgstr "觀看"

#: src/winio.c:2200
msgid "Further warnings were suppressed"
msgstr ""

#: src/winio.c:3387
#, fuzzy, c-format
msgid "line %zd/%zd (%d%%), col %zu/%zu (%d%%), char %zu/%zu (%d%%)"
msgstr "列 %ld/%ld (%d%%), 行 %lu/%lu (%d%%), 字元 %lu/%lu (%d%%)"

#: src/winio.c:3585
msgid "The nano text editor"
msgstr "nano 文字編輯器"

#: src/winio.c:3586
msgid "version"
msgstr "版本"

#: src/winio.c:3587
msgid "Brought to you by:"
msgstr "來自於:"

#: src/winio.c:3588
msgid "Special thanks to:"
msgstr "特別感謝:"

#: src/winio.c:3589
msgid "The Free Software Foundation"
msgstr "自由軟體基金會"

#: src/winio.c:3590
msgid "the many translators and the TP"
msgstr ""

#: src/winio.c:3591
msgid "For ncurses:"
msgstr "ncurses 部分:"

#: src/winio.c:3592
msgid "and anyone else we forgot..."
msgstr "以及其他我們不記得的人…"

#: src/winio.c:3593
msgid "Thank you for using nano!"
msgstr "謝謝您使用 nano﹗"

#~ msgid ""
#~ "Read %lu line (Converted from DOS and Mac format - Warning: No write "
#~ "permission)"
#~ msgid_plural ""
#~ "Read %lu lines (Converted from DOS and Mac format - Warning: No write "
#~ "permission)"
#~ msgstr[0] "已讀取 %lu 列 (轉檔自 DOS 與 Mac 格式 - 警告：沒有寫入權限)"

#~ msgid ""
#~ "Read %lu line (Converted from Mac format - Warning: No write permission)"
#~ msgid_plural ""
#~ "Read %lu lines (Converted from Mac format - Warning: No write permission)"
#~ msgstr[0] "已讀取 %lu 列 (轉檔自 Mac 格式 - 警告：沒有寫入權限)"

#~ msgid ""
#~ "Read %lu line (Converted from DOS format - Warning: No write permission)"
#~ msgid_plural ""
#~ "Read %lu lines (Converted from DOS format - Warning: No write permission)"
#~ msgstr[0] "已讀取 %lu 列 (轉檔自 DOS 格式 - 警告：沒有寫入權限)"

#~ msgid "Read %lu line ( Warning: No write permission)"
#~ msgid_plural "Read %lu lines (Warning: No write permission)"
#~ msgstr[0] "已讀取 %lu 列 (警告：沒有寫入權限)"

#~ msgid "Cannot prepend or append to a symlink with --nofollow set"
#~ msgstr "--nofollow 設定下，無法前引或附加至符號連結檔"

#~ msgid ""
#~ "Detected a legacy nano history file (%s) which I tried to move\n"
#~ "to the preferred location (%s) but encountered an error: %s"
#~ msgstr ""
#~ "偵測到舊的 nano 歷史檔案 (%s)，我已嘗試將它移動\n"
#~ "到偏好的位置 (%s) 但是遇到了錯誤：%s"

#~ msgid ""
#~ "Detected a legacy nano history file (%s) which I moved\n"
#~ "to the preferred location (%s)\n"
#~ "(see the nano FAQ about this change)"
#~ msgstr ""
#~ "偵測到舊的 nano 歷史檔案 (%s)，我已將它移動\n"
#~ "到偏好的位置 (%s)\n"
#~ "(參看關於這個變更的 nano FAQ)"

#~ msgid "Insert File"
#~ msgstr "插入檔案"

#~ msgid "Go to previous screen"
#~ msgstr "跳至前一畫面"

#~ msgid "Find Other Bracket"
#~ msgstr "尋找其他括號"

#~ msgid "Long line wrapping"
#~ msgstr "長列轉換"

#~ msgid "Multiple file buffers"
#~ msgstr "多重檔案緩衝區"

#~ msgid "Soft line wrapping"
#~ msgstr "長列換列"

#~ msgid "Window size is too small for nano...\n"
#~ msgstr "視窗尺寸對 nano 來說太小了…\n"

#~ msgid "Option\t\tMeaning\n"
#~ msgstr "選項\t\t意義\n"

#~ msgid "+LINE,COLUMN"
#~ msgstr "+列數,行數"

#~ msgid "Start at line LINE, column COLUMN"
#~ msgstr "從所指列數與行數開始"

#~ msgid "Enable multiple file buffers"
#~ msgstr "開啟多重檔案緩衝區功能"

#~ msgid "-Y <str>"
#~ msgstr "-Y <字串>"

#~ msgid "Don't follow symbolic links, overwrite"
#~ msgstr "不要依照符號連結，而是覆寫"

#~ msgid "Silently ignore startup issues like rc file errors"
#~ msgstr "默默地忽略像是 rc 檔案錯誤之類的啟動問題"

#~ msgid "Allow generic undo [EXPERIMENTAL]"
#~ msgstr "允許一般的復原 [實驗性質]"

#~ msgid "(ignored, for Pico compatibility)"
#~ msgstr "(忽略，為了與 Pico 相容)"

#~ msgid "Sorry, support for this function has been disabled"
#~ msgstr "抱歉，已經關閉此功能的支援"

#~ msgid "Save modified buffer (ANSWERING \"No\" WILL DESTROY CHANGES) ? "
#~ msgstr "儲存更動過的緩衝區嗎 (回答 \"No\" 會撤銷修改)？"

#~ msgid "Unknown Command"
#~ msgstr "不明的命令"

#~ msgid "XON ignored, mumble mumble"
#~ msgstr "忽略 XON，嗯嗯。"

#~ msgid "XOFF ignored, mumble mumble"
#~ msgstr "忽略 XOFF，嗯嗯。"

#~ msgid "Cannot add a magic string regex without a syntax command"
#~ msgstr "無法增加魔法正規表示式而沒有語法命令"

#~ msgid "Missing magic string name"
#~ msgstr "缺少魔法字串名稱"

#~ msgid "Must specify menu to bind key to (or \"all\")"
#~ msgstr "必須指定按鍵所繫結的選單 (或是 \"all\")"

#~ msgid "Cannot add a color command without a syntax command"
#~ msgstr "無法增加顏色命令而沒有語法命令"

#~ msgid "Cannot add a header regex without a syntax command"
#~ msgstr "無法增加標頭正規表示式而沒有語法命令"

#~ msgid "Missing flag"
#~ msgstr "缺少旗標"

#~ msgid ""
#~ "\n"
#~ "Press Enter to continue starting nano.\n"
#~ msgstr ""
#~ "\n"
#~ "按下輸入鍵以繼續啟動 nano。\n"

#~ msgid "Internal error: can't match line %d.  Please save your work"
#~ msgstr "內部錯誤：無法匹配第 %d 列。 請儲存您的工作"

#~ msgid "line wrap"
#~ msgstr "長列換列"

#~ msgid "Internal error: unknown type.  Please save your work"
#~ msgstr "內部錯誤：不明型態。 請儲存您的工作"

#~ msgid "Internal error: Redo setup failed.  Please save your work"
#~ msgstr "內部錯誤：重做設定失敗。 請儲存您的工作"

#~ msgid "Could not pipe"
#~ msgstr "管線功能無效"

#~ msgid "Internal error: can't setup uncut.  Please save your work."
#~ msgstr "內部錯誤：無法設定取消剪下。 請儲存您的工作。"

#~ msgid "Internal error: unknown type.  Please save your work."
#~ msgstr "內部錯誤：不明型態。 請儲存您的工作。"

#~ msgid "File:"
#~ msgstr "檔案:"

#~ msgid ""
#~ "Warning: Modifying a file which is not locked, check directory permission?"
#~ msgstr "警告：正在變更一個未鎖定的檔案，要檢查一下目錄權限嗎？"