# Traditional Chinese Messages for the nano editor
# Copyright (C) 2004, 05 Free Software Foundation, Inc.
# This file is distributed under the same license as the nano package.
# Wei-Lun Chao <chaoweilun@pcmail.com.tw>, 2004, 05
#
msgid ""
msgstr ""
"Project-Id-Version: nano 1.3.10pre2\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2009-02-16 23:08-0500\n"
"PO-Revision-Date: 2005-12-13 09:33+0800\n"
"Last-Translator: Wei-Lun Chao <chaoweilun@pcmail.com.tw>\n"
"Language-Team: Chinese (traditional) <zh-l10n@linux.org.tw>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"

#: src/browser.c:220
msgid "Go To Directory"
msgstr "跳至目錄"

#: src/browser.c:233 src/browser.c:830 src/files.c:790 src/files.c:1931
#: src/nano.c:1035 src/search.c:220 src/search.c:314 src/search.c:975
#: src/search.c:1040
msgid "Cancelled"
msgstr "已取消"

#: src/browser.c:266 src/browser.c:314
#, c-format
msgid "Can't go outside of %s in restricted mode"
msgstr "在限制模式中無法至 %s 外部"

#: src/browser.c:277 src/browser.c:324 src/browser.c:347 src/files.c:652
#: src/files.c:661 src/files.c:1455 src/files.c:1546 src/files.c:1594
#: src/files.c:1615 src/files.c:1738 src/files.c:2571 src/rcfile.c:502
#: src/rcfile.c:1133
#, c-format
msgid "Error reading %s: %s"
msgstr "讀取 %s 時發生錯誤: %s"

#: src/browser.c:303
msgid "Can't move up a directory"
msgstr "無法上移一個目錄"

#. TRANSLATORS: Try to keep this at most 7
#. * characters.
#: src/browser.c:665 src/browser.c:674
msgid "(dir)"
msgstr "(目錄)"

#. TRANSLATORS: Try to keep this at most 12
#. * characters.
#: src/browser.c:671
msgid "(parent dir)"
msgstr ""

#: src/browser.c:801 src/search.c:185
msgid "Search"
msgstr "搜尋"

#. TRANSLATORS: This string is just a modifier for the search
#. * prompt; no grammar is implied.
#: src/browser.c:805 src/search.c:189
msgid " [Case Sensitive]"
msgstr " [符合大小寫]"

#. TRANSLATORS: This string is just a modifier for the search
#. * prompt; no grammar is implied.
#: src/browser.c:811 src/search.c:195
msgid " [Regexp]"
msgstr " [正規表示式]"

#. TRANSLATORS: This string is just a modifier for the search
#. * prompt; no grammar is implied.
#: src/browser.c:817 src/search.c:201
msgid " [Backwards]"
msgstr " [向後搜尋]"

#: src/browser.c:909 src/browser.c:917 src/search.c:395
msgid "Search Wrapped"
msgstr "已從頭搜尋"

#: src/browser.c:1006 src/browser.c:1039 src/search.c:514 src/search.c:517
#: src/search.c:574 src/search.c:577
msgid "This is the only occurrence"
msgstr "這是惟一出現之處"

#: src/browser.c:1042 src/search.c:583
msgid "No current search pattern"
msgstr "沒有符合目前搜尋形式者"

#: src/files.c:125
#, c-format
msgid "Can't insert file from outside of %s"
msgstr "無法插入 %s 外部的檔案"

#: src/files.c:234
msgid "No more open file buffers"
msgstr "無多餘檔案緩衝區可開啟"

#: src/files.c:250
#, c-format
msgid "Switched to %s"
msgstr "切換至 %s"

#: src/files.c:251 src/global.c:466 src/winio.c:2168
msgid "New Buffer"
msgstr "新緩衝區"

#: src/files.c:583
#, c-format
msgid "Read %lu line (Converted from DOS and Mac format)"
msgid_plural "Read %lu lines (Converted from DOS and Mac format)"
msgstr[0] "已讀取 %lu 列 (轉檔自 DOS 與 Mac 格式)"

#: src/files.c:588
#, c-format
msgid "Read %lu line (Converted from Mac format)"
msgid_plural "Read %lu lines (Converted from Mac format)"
msgstr[0] "已讀取 %lu 列 (轉檔自 Mac 格式)"

#: src/files.c:593
#, c-format
msgid "Read %lu line (Converted from DOS format)"
msgid_plural "Read %lu lines (Converted from DOS format)"
msgstr[0] "已讀取 %lu 列 (轉檔自 DOS 格式)"

#: src/files.c:598
#, c-format
msgid "Read %lu line"
msgid_plural "Read %lu lines"
msgstr[0] "已讀取 %lu 列"

#: src/files.c:630 src/files.c:666
msgid "Reading File"
msgstr "正在讀取檔案"

#: src/files.c:636
msgid "New File"
msgstr "新檔案"

#: src/files.c:639
#, c-format
msgid "\"%s\" not found"
msgstr "找不到 \"%s\""

#: src/files.c:647 src/rcfile.c:493 src/rcfile.c:1083 src/rcfile.c:1124
#, c-format
msgid "\"%s\" is a directory"
msgstr "\"%s\" 是一個目錄"

#: src/files.c:648 src/rcfile.c:494 src/rcfile.c:1084 src/rcfile.c:1125
#, fuzzy, c-format
msgid "\"%s\" is a device file"
msgstr "\"%s\" 是一個裝置檔案"

#: src/files.c:747
#, c-format
msgid "Command to execute in new buffer [from %s] "
msgstr "在新緩衝區中執行的命令 [從 %s] "

#: src/files.c:749
#, c-format
msgid "Command to execute [from %s] "
msgstr "執行的命令 [從 %s] "

#: src/files.c:755
#, c-format
msgid "File to insert into new buffer [from %s] "
msgstr "所要插入新緩衝區的檔案 [從 %s] "

#: src/files.c:757
#, c-format
msgid "File to insert [from %s] "
msgstr "所要插入的檔案 [從 %s] "

#: src/files.c:1001
#, fuzzy
msgid "Key invalid in non-multibuffer mode"
msgstr "非多重緩衝區模式中此按鍵無效"

#: src/files.c:1409
#, c-format
msgid "Can't write outside of %s"
msgstr "無法寫入 %s 外部"

#: src/files.c:1424
msgid "Cannot prepend or append to a symlink with --nofollow set"
msgstr "--nofollow 設定下，無法前引或附加至符號連結檔"

#: src/files.c:1496 src/files.c:1521 src/files.c:1550
#, fuzzy, c-format
msgid "Error writing backup file %s: %s"
msgstr "寫入暫存檔案 %s 時發生錯誤"

#: src/files.c:1497 src/nano.c:692
msgid "Too many backup files?"
msgstr "太多備份檔案？"

#: src/files.c:1570 src/files.c:1627 src/files.c:1646 src/files.c:1658
#: src/files.c:1682 src/files.c:1700 src/files.c:1710 src/files.c:1746
#: src/files.c:1751 src/files.c:2644 src/files.c:2653
#, c-format
msgid "Error writing %s: %s"
msgstr "寫入 %s 時發生錯誤: %s"

#: src/files.c:1604 src/text.c:2851 src/text.c:2863
#, c-format
msgid "Error writing temp file: %s"
msgstr "寫入暫存檔案 %s 時發生錯誤"

#: src/files.c:1783
#, c-format
msgid "Wrote %lu line"
msgid_plural "Wrote %lu lines"
msgstr[0] "已寫入 %lu 列"

#: src/files.c:1887
msgid " [DOS Format]"
msgstr " [DOS 格式]"

#: src/files.c:1888
msgid " [Mac Format]"
msgstr " [Mac 格式]"

#: src/files.c:1890
msgid " [Backup]"
msgstr " [備份]"

#: src/files.c:1898
msgid "Prepend Selection to File"
msgstr "前引選擇部份於檔案"

#: src/files.c:1899
msgid "Append Selection to File"
msgstr "附加選擇部份至檔案"

#: src/files.c:1900
msgid "Write Selection to File"
msgstr "寫入選擇部份至檔案"

#: src/files.c:1903
msgid "File Name to Prepend to"
msgstr "要前引於的檔案名稱"

#: src/files.c:1904
msgid "File Name to Append to"
msgstr "要附加至的檔案名稱"

#: src/files.c:1905
msgid "File Name to Write"
msgstr "要寫入的檔案名稱"

#: src/files.c:2036
msgid "File exists, OVERWRITE ? "
msgstr "檔案已存在，要覆寫嗎？"

#: src/files.c:2045
msgid "Save file under DIFFERENT NAME ? "
msgstr "以不同的名稱存檔？"

#: src/files.c:2053
msgid "File was modified since you opened it, continue saving ? "
msgstr ""

#: src/files.c:2491
msgid "(more)"
msgstr "(更多)"

#: src/files.c:2574 src/rcfile.c:1149
#, fuzzy, c-format
msgid ""
"\n"
"Press Enter to continue starting nano.\n"
msgstr ""
"\n"
"按下輸入鍵繼續啟動 nano\n"

#: src/global.c:412 src/prompt.c:1290
msgid "Cancel"
msgstr "取消"

#: src/global.c:415
msgid "Case Sens"
msgstr "依大小寫"

#: src/global.c:416
msgid "Backwards"
msgstr "向後搜尋"

#: src/global.c:420
msgid "Regexp"
msgstr "正規表示"

#. TRANSLATORS: Try to keep the next five strings at most 10 characters.
#: src/global.c:446
#, fuzzy
msgid "PrevHstory"
msgstr "歷史記錄"

#: src/global.c:447
#, fuzzy
msgid "NextHstory"
msgstr "歷史記錄"

#: src/global.c:448
msgid "Replace"
msgstr "置換"

#: src/global.c:449
msgid "No Replace"
msgstr "不置換"

#: src/global.c:450
msgid "Go To Text"
msgstr "跳至文字"

#. TRANSLATORS: Try to keep the next three strings at most 12 characters.
#: src/global.c:452
#, fuzzy
msgid "WhereIs Next"
msgstr "何處是下一個"

#: src/global.c:454
#, fuzzy
msgid "First File"
msgstr "首列"

#: src/global.c:455
#, fuzzy
msgid "Last File"
msgstr "尾列"

#. TRANSLATORS: Try to keep the next nine strings at most 16 characters.
#: src/global.c:457
msgid "To Files"
msgstr "檔案選單"

#: src/global.c:459
msgid "DOS Format"
msgstr "DOS 格式"

#: src/global.c:460
msgid "Mac Format"
msgstr "Mac 格式"

#: src/global.c:461
msgid "Append"
msgstr "附加"

#: src/global.c:462
msgid "Prepend"
msgstr "前引"

#: src/global.c:463
msgid "Backup File"
msgstr "備份檔案"

#: src/global.c:464
msgid "Execute Command"
msgstr "執行命令"

#: src/global.c:468
msgid "Go To Dir"
msgstr "跳至目錄"

#. TRANSLATORS: Try to keep the following strings at most 10 characters.
#: src/global.c:477
msgid "Get Help"
msgstr "求助"

#: src/global.c:478
msgid "Exit"
msgstr "離開"

#: src/global.c:479
msgid "Where Is"
msgstr "搜尋"

#: src/global.c:480
msgid "Prev Page"
msgstr "上頁"

#: src/global.c:481
msgid "Next Page"
msgstr "下頁"

#: src/global.c:482
msgid "First Line"
msgstr "首列"

#: src/global.c:483
msgid "Last Line"
msgstr "尾列"

#: src/global.c:484
msgid "Suspend"
msgstr "暫停"

#: src/global.c:486
msgid "Beg of Par"
msgstr "段落開頭"

#: src/global.c:487
msgid "End of Par"
msgstr "段落結尾"

#: src/global.c:488
msgid "FullJstify"
msgstr "全部對齊"

#: src/global.c:490
msgid "Refresh"
msgstr "重新顯示"

#: src/global.c:491
msgid "Insert File"
msgstr "插入檔案"

#: src/global.c:492
msgid "Go To Line"
msgstr "跳列"

#: src/global.c:495
msgid "Justify the current paragraph"
msgstr "對齊目前段落"

#. TRANSLATORS: The next long series of strings are shortcut descriptions;
#. * they are best kept shorter than 56 characters, but may be longer.
#: src/global.c:500
msgid "Cancel the current function"
msgstr "取消目前功能"

#: src/global.c:501
msgid "Display this help text"
msgstr ""

#: src/global.c:504
#, fuzzy
msgid "Close the current file buffer / Exit from nano"
msgstr "關閉目前檔案緩衝區並離開 nano"

#: src/global.c:506
msgid "Exit from nano"
msgstr "離開 nano"

#: src/global.c:510
msgid "Write the current file to disk"
msgstr "寫入目前檔案至磁碟"

#: src/global.c:512
msgid "Insert another file into the current one"
msgstr "插入它檔至目前檔案"

#: src/global.c:514
#, fuzzy
msgid "Search for a string or a regular expression"
msgstr "使用正規表示式"

#: src/global.c:515
#, fuzzy
msgid "Go to previous screen"
msgstr "跳至前一畫面"

#: src/global.c:516
#, fuzzy
msgid "Go to next screen"
msgstr "跳至後一畫面"

#: src/global.c:518
msgid "Cut the current line and store it in the cutbuffer"
msgstr "剪下目前這列並存至剪貼簿"

#: src/global.c:520
msgid "Uncut from the cutbuffer into the current line"
msgstr "從剪貼簿還原至目前這列"

#: src/global.c:522
#, fuzzy
msgid "Display the position of the cursor"
msgstr "顯示游標位置"

#: src/global.c:524
msgid "Invoke the spell checker, if available"
msgstr "嘗試呼叫拼字檢查"

#: src/global.c:526
#, fuzzy
msgid "Replace a string or a regular expression"
msgstr "使用正規表示式"

#: src/global.c:527
msgid "Go to line and column number"
msgstr "跳至指定列與行位置"

#: src/global.c:529
msgid "Mark text at the cursor position"
msgstr "標記游標所在文字"

#: src/global.c:530
msgid "Repeat last search"
msgstr "重覆上次搜尋"

#: src/global.c:532
#, fuzzy
msgid "Copy the current line and store it in the cutbuffer"
msgstr "剪下目前這列並存至剪貼簿"

#: src/global.c:533
#, fuzzy
msgid "Indent the current line"
msgstr "附加至目前檔案"

#: src/global.c:534
#, fuzzy
msgid "Unindent the current line"
msgstr "附加至目前檔案"

#: src/global.c:535
msgid "Undo the last operation"
msgstr ""

#: src/global.c:536
msgid "Redo the last undone operation"
msgstr ""

#: src/global.c:538
#, fuzzy
msgid "Go forward one character"
msgstr "向前跳一字元"

#: src/global.c:539
#, fuzzy
msgid "Go back one character"
msgstr "向後跳一字元"

#: src/global.c:541
#, fuzzy
msgid "Go forward one word"
msgstr "向前跳一個字"

#: src/global.c:542
#, fuzzy
msgid "Go back one word"
msgstr "向後跳一個字"

#: src/global.c:544
#, fuzzy
msgid "Go to previous line"
msgstr "跳至前一列"

#: src/global.c:545
#, fuzzy
msgid "Go to next line"
msgstr "跳至後一列"

#: src/global.c:546
#, fuzzy
msgid "Go to beginning of current line"
msgstr "跳至目前列首"

#: src/global.c:547
#, fuzzy
msgid "Go to end of current line"
msgstr "跳至目前列尾"

#: src/global.c:550
#, fuzzy
msgid "Go to beginning of paragraph; then of previous paragraph"
msgstr "跳至目前段落開頭"

#: src/global.c:552
#, fuzzy
msgid "Go just beyond end of paragraph; then of next paragraph"
msgstr "跳至目前段落結尾"

#: src/global.c:555
msgid "Go to the first line of the file"
msgstr "跳至檔案第一列"

#: src/global.c:557
msgid "Go to the last line of the file"
msgstr "跳至檔案最後一列"

#: src/global.c:559
#, fuzzy
msgid "Go to the matching bracket"
msgstr "無對應括號"

#: src/global.c:561
msgid "Scroll up one line without scrolling the cursor"
msgstr "向上捲動一列但不捲動游標"

#: src/global.c:563
msgid "Scroll down one line without scrolling the cursor"
msgstr "向下捲動一列但不捲動游標"

#: src/global.c:567
msgid "Switch to the previous file buffer"
msgstr "切換至上個檔案緩衝區"

#: src/global.c:569
msgid "Switch to the next file buffer"
msgstr "切換至下個檔案緩衝區"

#: src/global.c:572
#, fuzzy
msgid "Insert the next keystroke verbatim"
msgstr "插入字元原形"

#: src/global.c:574
#, fuzzy
msgid "Insert a tab at the cursor position"
msgstr "插入跳格字元於游標位置"

#: src/global.c:576
#, fuzzy
msgid "Insert a newline at the cursor position"
msgstr "插入換列字元於游標位置"

#: src/global.c:578
msgid "Delete the character under the cursor"
msgstr "刪除游標之下的字元"

#: src/global.c:580
msgid "Delete the character to the left of the cursor"
msgstr "刪除游標左側的字元"

#: src/global.c:583
msgid "Cut from the cursor position to the end of the file"
msgstr "從游標位置剪下至檔案結尾"

#: src/global.c:586
msgid "Justify the entire file"
msgstr "對齊整個檔案"

#: src/global.c:590
msgid "Count the number of words, lines, and characters"
msgstr "計算字數、列數與字元數"

#: src/global.c:593
msgid "Refresh (redraw) the current screen"
msgstr "重新顯示目前畫面"

#: src/global.c:595
msgid "Suspend the editor (if suspend is enabled)"
msgstr ""

#: src/global.c:598
msgid "Toggle the case sensitivity of the search"
msgstr ""

#: src/global.c:600
#, fuzzy
msgid "Reverse the direction of the search"
msgstr "顯示游標位置"

#: src/global.c:604
#, fuzzy
msgid "Toggle the use of regular expressions"
msgstr "使用正規表示式"

#: src/global.c:608
#, fuzzy
msgid "Recall the previous search/replace string"
msgstr "編輯前次搜尋/置換字串"

#: src/global.c:610
#, fuzzy
msgid "Recall the next search/replace string"
msgstr "編輯前次搜尋/置換字串"

#: src/global.c:613
msgid "Go to file browser"
msgstr "呼叫檔案選單"

#: src/global.c:616
#, fuzzy
msgid "Toggle the use of DOS format"
msgstr "以 DOS 格式寫入檔案"

#: src/global.c:617
#, fuzzy
msgid "Toggle the use of Mac format"
msgstr "以 Mac 格式寫入檔案"

#: src/global.c:619
#, fuzzy
msgid "Toggle appending"
msgstr "長列轉換"

#: src/global.c:620
msgid "Toggle prepending"
msgstr ""

#: src/global.c:623
#, fuzzy
msgid "Toggle backing up of the original file"
msgstr "儲存既有檔案的備份"

#: src/global.c:624
msgid "Execute external command"
msgstr "執行外部命令"

#: src/global.c:628
#, fuzzy
msgid "Toggle the use of a new buffer"
msgstr "無法得知管線緩衝區大小"

#: src/global.c:631
msgid "Exit from the file browser"
msgstr "從檔案選單離開"

#: src/global.c:633
#, fuzzy
msgid "Go to the first file in the list"
msgstr "跳至檔案第一列"

#: src/global.c:635
#, fuzzy
msgid "Go to the last file in the list"
msgstr "跳至檔案最後一列"

#: src/global.c:636
msgid "Go to directory"
msgstr "跳至目錄"

#. TRANSLATORS: Try to keep this at most 10 characters.
#: src/global.c:663
msgid "Close"
msgstr "關閉"

#. TRANSLATORS: Try to keep this at most 10 characters.
#: src/global.c:674
msgid "WriteOut"
msgstr "寫入"

#. TRANSLATORS: Try to keep this at most 10 characters.
#: src/global.c:679
msgid "Justify"
msgstr "對齊"

#. TRANSLATORS: Try to keep this at most 10 characters.
#: src/global.c:690
msgid "Read File"
msgstr "讀檔"

#. TRANSLATORS: Try to keep this at most 10 characters.
#: src/global.c:707
msgid "Cut Text"
msgstr "剪下文字"

#. TRANSLATORS: Try to keep this at most 10 characters.
#: src/global.c:712
msgid "UnJustify"
msgstr "還原對齊"

#. TRANSLATORS: Try to keep this at most 10 characters.
#: src/global.c:717
#, fuzzy
msgid "UnCut Text"
msgstr "還原剪下"

#. TRANSLATORS: Try to keep this at most 10 characters.
#: src/global.c:722 src/global.c:750
msgid "Cur Pos"
msgstr "游標位置"

#. TRANSLATORS: Try to keep this at most 10 characters.
#: src/global.c:732
msgid "To Spell"
msgstr "拼字檢查"

#: src/global.c:766
msgid "Mark Text"
msgstr "標記文字"

#: src/global.c:772
#, fuzzy
msgid "Copy Text"
msgstr "剪下文字"

#: src/global.c:775
#, fuzzy
msgid "Indent Text"
msgstr "剪下文字"

#: src/global.c:778
#, fuzzy
msgid "Unindent Text"
msgstr "還原剪下"

#: src/global.c:781
msgid "Undo"
msgstr ""

#: src/global.c:784
msgid "Redo"
msgstr ""

#: src/global.c:795
msgid "Forward"
msgstr "向前"

#: src/global.c:799
msgid "Back"
msgstr "向後"

#: src/global.c:804
msgid "Next Word"
msgstr "後一個字"

#: src/global.c:807
msgid "Prev Word"
msgstr "前一個字"

#: src/global.c:811
msgid "Prev Line"
msgstr "上列"

#: src/global.c:814
msgid "Next Line"
msgstr "下列"

#: src/global.c:817
msgid "Home"
msgstr "頂端"

#: src/global.c:820
msgid "End"
msgstr "尾端"

#: src/global.c:832
msgid "Find Other Bracket"
msgstr "尋找其他括號"

#: src/global.c:835
msgid "Scroll Up"
msgstr "向上捲動"

#: src/global.c:838
msgid "Scroll Down"
msgstr "向下捲動"

#: src/global.c:843
msgid "Previous File"
msgstr "上個檔案"

#: src/global.c:845
msgid "Next File"
msgstr "下個檔案"

#. TRANSLATORS: This is displayed when the next keystroke will be
#. * inserted verbatim.
#: src/global.c:849 src/text.c:2967
msgid "Verbatim Input"
msgstr "原形輸入"

#: src/global.c:854
msgid "Tab"
msgstr "跳格鍵"

#: src/global.c:857
msgid "Enter"
msgstr "輸入鍵"

#: src/global.c:860
msgid "Delete"
msgstr "刪除鍵"

#: src/global.c:863
msgid "Backspace"
msgstr "退格鍵"

#: src/global.c:880
msgid "CutTillEnd"
msgstr "刪至末端"

#: src/global.c:893
msgid "Word Count"
msgstr "計算字數"

#: src/global.c:1344
msgid "Help mode"
msgstr "輔助模式"

#: src/global.c:1346
msgid "Constant cursor position display"
msgstr "持續顯示游標位置"

#: src/global.c:1348
#, fuzzy
msgid "Use of one more line for editing"
msgstr "編輯時使用更多空間"

#: src/global.c:1350
msgid "Smooth scrolling"
msgstr "平滑式捲動畫面"

#: src/global.c:1352
msgid "Whitespace display"
msgstr "顯示空格"

#: src/global.c:1354
msgid "Color syntax highlighting"
msgstr "語法色彩標示"

#: src/global.c:1356
msgid "Smart home key"
msgstr "智慧型 HOME 按鍵"

#: src/global.c:1358
msgid "Auto indent"
msgstr "自動縮排"

#: src/global.c:1360
msgid "Cut to end"
msgstr "剪下至列尾"

#: src/global.c:1362
msgid "Long line wrapping"
msgstr "長列轉換"

#: src/global.c:1364
msgid "Conversion of typed tabs to spaces"
msgstr "已輸入跳格符號至空白的轉換"

#: src/global.c:1366
msgid "Backup files"
msgstr "備份檔案"

#: src/global.c:1368
msgid "Multiple file buffers"
msgstr "多重檔案緩衝區"

#: src/global.c:1370
msgid "Mouse support"
msgstr "滑鼠支援"

#: src/global.c:1372
msgid "No conversion from DOS/Mac format"
msgstr "不從 DOS/Mac 格式轉檔"

#: src/global.c:1374
#, fuzzy
msgid "Suspension"
msgstr "暫停"

#: src/help.c:236
msgid ""
"Search Command Help Text\n"
"\n"
" Enter the words or characters you would like to search for, and then press "
"Enter.  If there is a match for the text you entered, the screen will be "
"updated to the location of the nearest match for the search string.\n"
"\n"
" The previous search string will be shown in brackets after the search "
"prompt.  Hitting Enter without entering any text will perform the previous "
"search.  "
msgstr ""
"搜尋命令輔助說明\n"
"\n"
" 首先輸入您想要搜尋的字串或字元，然後按下輸入鍵 (Enter)。如果存在著 符合您所"
"輸入的文字，畫面就會更新到最合乎搜尋字串的位置。\n"
"\n"
" 前次搜尋的字串將會顯示在 搜尋: 提示符號後面的括號中。不輸入任何文字 而直接按"
"下輸入鍵則會履行前次的搜尋。"

#: src/help.c:245
msgid ""
"If you have selected text with the mark and then search to replace, only "
"matches in the selected text will be replaced.\n"
"\n"
" The following function keys are available in Search mode:\n"
"\n"
msgstr ""
"如果您已經用標記選擇了一段文字 並進行搜尋替換，就只有在選擇文字中符合者將會被"
"替換。\n"
"\n"
" 以下的功能鍵可用於搜尋模式:\n"
"\n"

#: src/help.c:251
msgid ""
"Go To Line Help Text\n"
"\n"
" Enter the line number that you wish to go to and hit Enter.  If there are "
"fewer lines of text than the number you entered, you will be brought to the "
"last line of the file.\n"
"\n"
" The following function keys are available in Go To Line mode:\n"
"\n"
msgstr ""
"跳列輔助說明\n"
"\n"
" 首先輸入您想去的列數編號並按下輸入鍵 (Enter)。如果文章中的列數比您所輸 入要"
"少，您將會被帶至檔案的最後一列。\n"
"\n"
" 以下的功能鍵可用於跳列模式: \n"
"\n"

#: src/help.c:260
msgid ""
"Insert File Help Text\n"
"\n"
" Type in the name of a file to be inserted into the current file buffer at "
"the current cursor location.\n"
"\n"
" If you have compiled nano with multiple file buffer support, and enable "
"multiple file buffers with the -F or --multibuffer command line flags, the "
"Meta-F toggle, or a nanorc file, inserting a file will cause it to be loaded "
"into a separate buffer (use Meta-< and > to switch between file buffers).  "
msgstr ""
"插入檔案輔助說明\n"
"\n"
" 先把檔案的名稱鍵入，它將會插入在目前緩衝區的游標所在之處。\n"
"\n"
" 如果您所編譯的 nano 支援多重檔案緩衝區，並且將此功能以命令列旗標 -F 或 --"
"multibuffer、Meta-F 開關，或者 nanorc 檔案來啟動的話，所插入的檔案 將會被載入"
"另外的緩衝區中 (利用 Meta-< 和 > 在檔案緩衝區間切換)。 "

#: src/help.c:269
msgid ""
"If you need another blank buffer, do not enter any filename, or type in a "
"nonexistent filename at the prompt and press Enter.\n"
"\n"
" The following function keys are available in Insert File mode:\n"
"\n"
msgstr ""
"如果您需要另一個空的緩衝區，那就不要輸入任何檔名，或是在提示符號後鍵 入一個不"
"存在的檔名，然後按下輸入鍵。\n"
"\n"
" 以下的功能鍵可用於插入檔案模式:\n"
"\n"

#: src/help.c:275
msgid ""
"Write File Help Text\n"
"\n"
" Type the name that you wish to save the current file as and press Enter to "
"save the file.\n"
"\n"
" If you have selected text with the mark, you will be prompted to save only "
"the selected portion to a separate file.  To reduce the chance of "
"overwriting the current file with just a portion of it, the current filename "
"is not the default in this mode.\n"
"\n"
" The following function keys are available in Write File mode:\n"
"\n"
msgstr ""
"寫入檔案輔助說明\n"
"\n"
" 先鍵入您想要以此來儲存目前檔案的名稱，並按下輸入鍵來儲存檔案。\n"
"\n"
" 如果已經用標記選擇了文字，那麼您將會被提示，只儲存標記部份到另外的檔 案。為"
"了降低目前檔案只被其中部份覆寫的機會，在此模式下，目前的檔名不會 成為預設"
"值。\n"
"\n"
" 以下的功能鍵可用於寫入檔案模式: \n"
"\n"

#: src/help.c:289
msgid ""
"File Browser Help Text\n"
"\n"
" The file browser is used to visually browse the directory structure to "
"select a file for reading or writing.  You may use the arrow keys or Page Up/"
"Down to browse through the files, and S or Enter to choose the selected file "
"or enter the selected directory.  To move up one level, select the directory "
"called \"..\" at the top of the file list.\n"
"\n"
" The following function keys are available in the file browser:\n"
"\n"
msgstr ""
"檔案選單輔助說明\n"
"\n"
" 檔案選單是用來視覺化瀏覽目錄結構，以選取要讀出或寫入的檔案。您可以 使用上下"
"左右鍵或上頁/下頁來瀏覽，並用 S 或輸入鍵來選取所要的檔案或者 進入所選的目錄。"
"要跳到上層時，選擇在檔案列表頂端名為 \"..\" 的目錄。\n"
"\n"
" 以下的功能鍵可用於檔案選單: \n"
"\n"

#: src/help.c:302
#, fuzzy
msgid ""
"Browser Search Command Help Text\n"
"\n"
" Enter the words or characters you would like to search for, and then press "
"Enter.  If there is a match for the text you entered, the screen will be "
"updated to the location of the nearest match for the search string.\n"
"\n"
" The previous search string will be shown in brackets after the search "
"prompt.  Hitting Enter without entering any text will perform the previous "
"search.\n"
"\n"
msgstr ""
"搜尋命令輔助說明\n"
"\n"
" 首先輸入您想要搜尋的字串或字元，然後按下輸入鍵 (Enter)。如果存在著 符合您所"
"輸入的文字，畫面就會更新到最合乎搜尋字串的位置。\n"
"\n"
" 前次搜尋的字串將會顯示在 搜尋: 提示符號後面的括號中。不輸入任何文字 而直接按"
"下輸入鍵則會履行前次的搜尋。"

#: src/help.c:311
msgid ""
" The following function keys are available in Browser Search mode:\n"
"\n"
msgstr ""

#: src/help.c:315
msgid ""
"Browser Go To Directory Help Text\n"
"\n"
" Enter the name of the directory you would like to browse to.\n"
"\n"
" If tab completion has not been disabled, you can use the Tab key to "
"(attempt to) automatically complete the directory name.\n"
"\n"
" The following function keys are available in Browser Go To Directory mode:\n"
"\n"
msgstr ""
"跳至目錄輔助說明\n"
"\n"
" 先輸入您想要瀏覽的目錄名稱。\n"
"\n"
" 如果跳格補正的功能沒有被關閉，您可以利用跳格鍵 (TAB) 去 (嘗試) 自動 補正目錄"
"名稱。\n"
"\n"
" 以下的功能鍵可用於跳至目錄模式: \n"
"\n"

#: src/help.c:328
#, fuzzy
msgid ""
"Spell Check Help Text\n"
"\n"
" The spell checker checks the spelling of all text in the current file.  "
"When an unknown word is encountered, it is highlighted and a replacement can "
"be edited.  It will then prompt to replace every instance of the given "
"misspelled word in the current file, or, if you have selected text with the "
"mark, in the selected text.\n"
"\n"
" The following function keys are available in Spell Check mode:\n"
"\n"
msgstr ""
"拼字檢查輔助說明\n"
"\n"
" 拼字檢查程式會檢查目前檔案中所有文字的拼法。當遇到一個未知的字，它會 被標記"
"起來，並讓您編輯替代文字。對於目前檔案中每一個拼錯的字，都會顯示 置換的提示；"
"或者，如果已經用標記選擇了文字的話，那就只作用於選取的文字 之中。\n"
"\n"
" 以下的功能鍵可用於拼字檢查模式: \n"
"\n"

#: src/help.c:343
#, fuzzy
msgid ""
"Execute Command Help Text\n"
"\n"
" This mode allows you to insert the output of a command run by the shell "
"into the current buffer (or a new buffer in multiple file buffer mode).  If "
"you need another blank buffer, do not enter any command.\n"
"\n"
" The following function keys are available in Execute Command mode:\n"
"\n"
msgstr ""
"執行命令輔助說明\n"
"\n"
" 本選單允許您將 shell 執行的命令輸出結果，插入目前的緩衝區 (或是多重緩衝 區模"
"式下的新緩衝區)。如果您需要另一個空白緩衝區，就不要輸入任何命令。\n"
"\n"
" 以下的功能鍵可用於執行命令模式: \n"
"\n"

#: src/help.c:356
#, fuzzy
msgid ""
"Main nano help text\n"
"\n"
" The nano editor is designed to emulate the functionality and ease-of-use of "
"the UW Pico text editor.  There are four main sections of the editor.  The "
"top line shows the program version, the current filename being edited, and "
"whether or not the file has been modified.  Next is the main editor window "
"showing the file being edited.  The status line is the third line from the "
"bottom and shows important messages.  "
msgstr ""
"nano 輔助說明\n"
"\n"
" nano 編輯器是設計來在功能性及易用性方面，模仿華盛頓大學的 Pico 文字 編輯器。"
"它含有四個主要部份:頂列顯示程式版本、目前被編輯的檔案名稱， 以及是否這檔案已"
"經更動過。接著是主要編輯區，顯示正在編輯的檔案。狀態 列位於倒數第三列，用來顯"
"示重要的訊息。底部的兩列則顯示編輯器中最常用 到的快捷鍵。\n"
"\n"
" "

#: src/help.c:366
#, fuzzy
msgid ""
"The bottom two lines show the most commonly used shortcuts in the editor.\n"
"\n"
" The notation for shortcuts is as follows: Control-key sequences are notated "
"with a caret (^) symbol and can be entered either by using the Control "
"(Ctrl) key or pressing the Escape (Esc) key twice.  Escape-key sequences are "
"notated with the Meta (M-) symbol and can be entered using either the Esc, "
"Alt, or Meta key depending on your keyboard setup.  "
msgstr ""
"快捷鍵的記號定義如下：控制鍵組 (Control-key) 序列是以一個 \"帽子\" (caret, "
"^) 符號來表示，它可以藉由控制鍵 (Ctrl) 或是按兩次脫離鍵 (Esc) 來輸入。脫離鍵"
"組 (Escape-key) 序列是以 \"中介\" (Meta, M) 符號表示，它 可以依照您的鍵盤設"
"定，利用 Esc，Alt 或 Meta 來輸入。"

#: src/help.c:375
msgid ""
"Also, pressing Esc twice and then typing a three-digit decimal number from "
"000 to 255 will enter the character with the corresponding value.  The "
"following keystrokes are available in the main editor window.  Alternative "
"keys are shown in parentheses:\n"
"\n"
msgstr ""
"另外，按 Esc 兩次 之後再鍵入從 000 到 255 之間的三位數字，則會輸入該 ASCII 碼"
"對應的字 元。下列按鍵組合可用於主要編輯區，替代按鍵則顯示於括弧內:\n"
"\n"

#: src/help.c:407 src/help.c:483
msgid "enable/disable"
msgstr "開啟/關閉"

#: src/nano.c:590
#, fuzzy
msgid "Key invalid in view mode"
msgstr "觀看模式中此按鍵無效"

#: src/nano.c:686
#, c-format
msgid ""
"\n"
"Buffer written to %s\n"
msgstr ""
"\n"
"緩衝區已寫入 %s\n"

#: src/nano.c:688
#, c-format
msgid ""
"\n"
"Buffer not written to %s: %s\n"
msgstr ""
"\n"
"緩衝區未寫入至 %s: %s\n"

#: src/nano.c:691
#, c-format
msgid ""
"\n"
"Buffer not written: %s\n"
msgstr ""
"\n"
"緩衝區未寫入: %s\n"

#: src/nano.c:703
msgid "Window size is too small for nano...\n"
msgstr "視窗尺寸對 nano 來說太小了...\n"

#: src/nano.c:796
#, fuzzy, c-format
msgid ""
"Usage: nano [OPTIONS] [[+LINE,COLUMN] FILE]...\n"
"\n"
msgstr ""
"用法: nano [+列數,行數] [選項] [檔案名稱]\n"
"\n"

#: src/nano.c:799
#, fuzzy, c-format
msgid "Option\t\tGNU long option\t\tMeaning\n"
msgstr "選項\t\tGNU 長選項\t\t意義\n"

#: src/nano.c:801
#, c-format
msgid "Option\t\tMeaning\n"
msgstr "選項\t\t意義\n"

#: src/nano.c:804
msgid "Show this message"
msgstr "顯示此訊息"

#: src/nano.c:805
msgid "+LINE,COLUMN"
msgstr "+列數,行數"

#: src/nano.c:806
msgid "Start at line LINE, column COLUMN"
msgstr "從所指列數與行數開始"

#: src/nano.c:808
msgid "Enable smart home key"
msgstr "開啟智慧型 HOME 按鍵功能"

#: src/nano.c:809
msgid "Save backups of existing files"
msgstr "儲存既有檔案的備份"

#: src/nano.c:810
#, fuzzy
msgid "-C <dir>"
msgstr "-C [目錄]"

#: src/nano.c:810
#, fuzzy
msgid "--backupdir=<dir>"
msgstr "--backupdir=[目錄]"

#: src/nano.c:811
msgid "Directory for saving unique backup files"
msgstr "用以儲存獨一備份檔案的目錄"

#: src/nano.c:814
msgid "Use bold instead of reverse video text"
msgstr ""

#: src/nano.c:817
msgid "Convert typed tabs to spaces"
msgstr "將已輸入的跳格符號轉換為空白"

#: src/nano.c:820
msgid "Enable multiple file buffers"
msgstr "開啟多重檔案緩衝區功能"

#: src/nano.c:825
msgid "Log & read search/replace string history"
msgstr "記錄與讀取 搜尋/置換 的歷史字串"

#: src/nano.c:828
msgid "Don't look at nanorc files"
msgstr "不要參考 nanorc 檔案"

#: src/nano.c:831
msgid "Fix numeric keypad key confusion problem"
msgstr "修正數字鍵區按鍵混淆問題"

#: src/nano.c:833
msgid "Don't add newlines to the ends of files"
msgstr "不要將換列加到檔案末端"

#: src/nano.c:836
msgid "Don't convert files from DOS/Mac format"
msgstr "不要從 DOS/Mac 格式轉檔"

#: src/nano.c:838
#, fuzzy
msgid "Use one more line for editing"
msgstr "編輯時使用更多空間"

#: src/nano.c:840
#, fuzzy
msgid "-Q <str>"
msgstr "-Q [字串]"

#: src/nano.c:840
#, fuzzy
msgid "--quotestr=<str>"
msgstr "--quotestr=[字串]"

#: src/nano.c:841
msgid "Quoting string"
msgstr "引用代表字串"

#: src/nano.c:843
msgid "Restricted mode"
msgstr "限制模式"

#: src/nano.c:846
msgid "Scroll by line instead of half-screen"
msgstr ""

#: src/nano.c:848
#, fuzzy
msgid "-T <#cols>"
msgstr "-T [#行數]"

#: src/nano.c:848
#, fuzzy
msgid "--tabsize=<#cols>"
msgstr "--tabsize=[#行數]"

#: src/nano.c:849
#, fuzzy
msgid "Set width of a tab to #cols columns"
msgstr "設定跳格寬度為 #行數"

#: src/nano.c:851
msgid "Do quick statusbar blanking"
msgstr "狀態列快速閃動"

#: src/nano.c:854
msgid "Print version information and exit"
msgstr "顯示版本資訊並離開"

#: src/nano.c:857
msgid "Detect word boundaries more accurately"
msgstr "更正確地偵測單字邊界"

#: src/nano.c:860
#, fuzzy
msgid "-Y <str>"
msgstr "-Y [字串]"

#: src/nano.c:860
#, fuzzy
msgid "--syntax=<str>"
msgstr "--syntax=[字串]"

#: src/nano.c:861
#, fuzzy
msgid "Syntax definition to use for coloring"
msgstr "字串做為語法定義"

#: src/nano.c:863
msgid "Constantly show cursor position"
msgstr "持續顯示游標位置"

#: src/nano.c:865
msgid "Fix Backspace/Delete confusion problem"
msgstr "修正 退格鍵/刪除鍵 混淆問題"

#: src/nano.c:868
msgid "Automatically indent new lines"
msgstr "自動縮排新列"

#: src/nano.c:869
msgid "Cut from cursor to end of line"
msgstr "從游標剪下至列尾"

#: src/nano.c:872
msgid "Don't follow symbolic links, overwrite"
msgstr "不要依照符號連結，而是覆寫"

#: src/nano.c:874
#, fuzzy
msgid "Enable the use of the mouse"
msgstr "開啟滑鼠功能"

#: src/nano.c:877
#, fuzzy
msgid "-o <dir>"
msgstr "-o [目錄]"

#: src/nano.c:877
#, fuzzy
msgid "--operatingdir=<dir>"
msgstr "--operatingdir=[目錄]"

#: src/nano.c:878
msgid "Set operating directory"
msgstr "設定操作目錄"

#: src/nano.c:881
msgid "Preserve XON (^Q) and XOFF (^S) keys"
msgstr "保留 XON (^Q) 和 XOFF (^S) 按鍵"

#: src/nano.c:883
msgid "Silently ignore startup issues like rc file errors"
msgstr ""

#: src/nano.c:885
#, fuzzy
msgid "-r <#cols>"
msgstr "-r [#行數]"

#: src/nano.c:885
#, fuzzy
msgid "--fill=<#cols>"
msgstr "--fill=[#行數]    "

#: src/nano.c:886
#, fuzzy
msgid "Set wrapping point at column #cols"
msgstr "設定跳格寬度為 #行數"

#: src/nano.c:889
#, fuzzy
msgid "-s <prog>"
msgstr "-s [程式]"

#: src/nano.c:889
#, fuzzy
msgid "--speller=<prog>"
msgstr "--speller=[程式]"

#: src/nano.c:890
msgid "Enable alternate speller"
msgstr "啟用替代的拼字檢查程式"

#: src/nano.c:893
msgid "Auto save on exit, don't prompt"
msgstr "離開時自動儲存，不要提示"

#: src/nano.c:894
#, fuzzy
msgid "View mode (read-only)"
msgstr "觀看 (唯讀) 模式"

#: src/nano.c:896
msgid "Don't wrap long lines"
msgstr "不要自動換列"

#: src/nano.c:898
#, fuzzy
msgid "Don't show the two help lines"
msgstr "不要顯示輔助區"

#: src/nano.c:899
#, fuzzy
msgid "Enable suspension"
msgstr "開啟暫停功能"

#: src/nano.c:903
msgid "(ignored, for Pico compatibility)"
msgstr "(忽略，為了與 Pico 相容)"

#: src/nano.c:913
#, c-format
msgid " GNU nano version %s (compiled %s, %s)\n"
msgstr " GNU nano 版本 %s (編譯於 %s, %s)\n"

#: src/nano.c:918
#, c-format
msgid " Email: nano@nano-editor.org\tWeb: http://www.nano-editor.org/"
msgstr " 電子郵件: nano@nano-editor.org\t\t網頁: http://www.nano-editor.org/"

#: src/nano.c:919
#, c-format
msgid ""
"\n"
" Compiled options:"
msgstr ""
"\n"
" 編譯選項:"

#: src/nano.c:997
msgid "Sorry, support for this function has been disabled"
msgstr "抱歉，已經關閉此功能的支援"

#: src/nano.c:1019
msgid "Save modified buffer (ANSWERING \"No\" WILL DESTROY CHANGES) ? "
msgstr "儲存更動過的緩衝區嗎 (回答 \"No\" 會撤銷修改)？"

#: src/nano.c:1061
msgid "Couldn't reopen stdin from keyboard, sorry\n"
msgstr ""

#: src/nano.c:1084
#, c-format
msgid "Reading from stdin, ^C to abort\n"
msgstr ""

#: src/nano.c:1152
msgid "Received SIGHUP or SIGTERM\n"
msgstr "接收到 SIGHUP 或 SIGTERM\n"

#: src/nano.c:1170
#, fuzzy, c-format
msgid "Use \"fg\" to return to nano.\n"
msgstr "利用 \"fg\" 來回到 nano"

#: src/nano.c:1347
msgid "enabled"
msgstr "開啟"

#: src/nano.c:1348
msgid "disabled"
msgstr "關閉"

#: src/nano.c:1509 src/winio.c:1256
#, fuzzy
msgid "Unknown Command"
msgstr "旗標 %s 無法辨識"

#: src/nano.c:1635
#, fuzzy
msgid "XON ignored, mumble mumble"
msgstr "忽略 XON，嗯嗯。"

#: src/nano.c:1640
#, fuzzy
msgid "XOFF ignored, mumble mumble"
msgstr "忽略 XOFF，嗯嗯。"

#: src/nano.c:2135 src/rcfile.c:1032
#, fuzzy, c-format
msgid "Requested tab size \"%s\" is invalid"
msgstr "所要求的跳格寬度 %s 無效"

#: src/nano.c:2194 src/rcfile.c:957
#, fuzzy, c-format
msgid "Requested fill size \"%s\" is invalid"
msgstr "所要求的填滿行數 %s 無效"

#. TRANSLATORS: For the next three strings, if possible, specify
#. * the single-byte shortcuts for both your language and English.
#. * For example, in French: "OoYy" for "Oui".
#: src/prompt.c:1261
msgid "Yy"
msgstr "Yy"

#: src/prompt.c:1262
msgid "Nn"
msgstr "Nn"

#: src/prompt.c:1263
msgid "Aa"
msgstr "Aa"

#: src/prompt.c:1277
msgid "Yes"
msgstr "是"

#: src/prompt.c:1282
msgid "All"
msgstr "全部"

#: src/prompt.c:1287
msgid "No"
msgstr "否"

#: src/rcfile.c:127
#, c-format
msgid "Error in %s on line %lu: "
msgstr "在 %s (位於第 %lu 列) 中發生錯誤: "

#: src/rcfile.c:182
#, fuzzy, c-format
msgid "Argument '%s' has an unterminated \""
msgstr "引數 %s 有未封閉的 \""

#: src/rcfile.c:209 src/rcfile.c:261 src/rcfile.c:645 src/rcfile.c:702
#: src/rcfile.c:755
msgid "Regex strings must begin and end with a \" character"
msgstr "正規表示式字串必須以 \" 字元開始及結束"

#: src/rcfile.c:235 src/search.c:62
#, c-format
msgid "Bad regex \"%s\": %s"
msgstr "不良的正規表示式 \"%s\": %s"

#: src/rcfile.c:255
msgid "Missing syntax name"
msgstr "缺少語法名稱"

#: src/rcfile.c:313
msgid "The \"none\" syntax is reserved"
msgstr "\"none\" 語法已被保留"

#: src/rcfile.c:320
msgid "The \"default\" syntax must take no extensions"
msgstr "\"default\" 語法必須不含任何副檔名"

#: src/rcfile.c:383
#, fuzzy
msgid "Missing key name"
msgstr "缺少語法名稱"

#: src/rcfile.c:395
msgid "keybindings must begin with \"^\", \"M\", or \"F\""
msgstr ""

#: src/rcfile.c:404
msgid "Must specify function to bind key to"
msgstr ""

#: src/rcfile.c:415
msgid "Must specify menu to bind key to (or \"all\")"
msgstr ""

#: src/rcfile.c:422
#, c-format
msgid "Could not map name \"%s\" to a function"
msgstr ""

#: src/rcfile.c:429
#, c-format
msgid "Could not map name \"%s\" to a menu"
msgstr ""

#: src/rcfile.c:451
#, c-format
msgid "Sorry, keystr \"%s\" is an illegal binding"
msgstr ""

#: src/rcfile.c:559
#, fuzzy, c-format
msgid ""
"Color \"%s\" not understood.\n"
"Valid colors are \"green\", \"red\", \"blue\",\n"
"\"white\", \"yellow\", \"cyan\", \"magenta\" and\n"
"\"black\", with the optional prefix \"bright\"\n"
"for foreground colors."
msgstr ""
"顏色 %s 無法辨識。\n"
"有效的顏色是 \"green\"(綠)、\"red\"(紅)、\"blue\"(藍)、\n"
"\"white\"(白)、\"yellow\"(黃)、\"cyan\"(青)、\"magenta\"(瑰) 和 \n"
"\"black\"(黑)，選擇性的前置字 \"bright\"(明亮) \n"
"可用於前景色。"

#: src/rcfile.c:581
#, fuzzy
msgid "Cannot add a color command without a syntax command"
msgstr "無法直接增加顏色而沒有語法列"

#: src/rcfile.c:586
msgid "Missing color name"
msgstr "缺少顏色名稱"

#: src/rcfile.c:606
#, fuzzy, c-format
msgid "Background color \"%s\" cannot be bright"
msgstr "背景色 %s 不可為明亮"

#: src/rcfile.c:624 src/rcfile.c:743
msgid "Missing regex string"
msgstr "缺少正規表示式字串"

#: src/rcfile.c:696
msgid "\"start=\" requires a corresponding \"end=\""
msgstr "\"start=\" 要求對應的 \"end=\""

#: src/rcfile.c:738
#, fuzzy
msgid "Cannot add a header regex without a syntax command"
msgstr "無法直接增加顏色而沒有語法列"

#: src/rcfile.c:808
#, c-format
msgid "Fatal error: no keys mapped for function \"%s\""
msgstr ""

#: src/rcfile.c:810
msgid ""
"Exiting.  Please use nano with the -I option if needed to adjust your nanorc "
"settings\n"
msgstr ""

#: src/rcfile.c:860 src/rcfile.c:869 src/rcfile.c:879
#, c-format
msgid "Command \"%s\" not allowed in included file"
msgstr ""

#: src/rcfile.c:885 src/rcfile.c:1057
#, c-format
msgid "Syntax \"%s\" has no color commands"
msgstr ""

#: src/rcfile.c:898
#, fuzzy, c-format
msgid "Command \"%s\" not understood"
msgstr "無法辨識 %s 命令"

#: src/rcfile.c:904
msgid "Missing flag"
msgstr "缺少旗標"

#: src/rcfile.c:926
#, fuzzy, c-format
msgid "Option \"%s\" requires an argument"
msgstr "選項 %s 要求引數"

#: src/rcfile.c:944
msgid "Option is not a valid multibyte string"
msgstr "選項並非正確的多位元字串"

#: src/rcfile.c:970 src/rcfile.c:998 src/rcfile.c:1007
msgid "Non-blank characters required"
msgstr "需要非空格字元"

#: src/rcfile.c:980
msgid "Two single-column characters required"
msgstr "需要兩個單行字元"

#: src/rcfile.c:1046
#, fuzzy, c-format
msgid "Cannot unset flag \"%s\""
msgstr "無法解除旗標 %s 設定"

#: src/rcfile.c:1052
#, fuzzy, c-format
msgid "Unknown flag \"%s\""
msgstr "旗標 %s 無法辨識"

#: src/rcfile.c:1111
msgid "I can't find my home directory!  Wah!"
msgstr "我找不到我的家目錄！哇！"

#: src/search.c:96
#, c-format
msgid "\"%.*s%s\" not found"
msgstr "找不到 \"%.*s%s\""

#: src/search.c:205
msgid " (to replace) in selection"
msgstr " 在標記中(置換)"

#: src/search.c:207
msgid " (to replace)"
msgstr " (置換)"

#: src/search.c:784
msgid "Replace this instance?"
msgstr "置換這個？"

#: src/search.c:962
msgid "Replace with"
msgstr "以此置換"

#: src/search.c:1004
#, c-format
msgid "Replaced %lu occurrence"
msgid_plural "Replaced %lu occurrences"
msgstr[0] "已置換 %lu 處"

#: src/search.c:1034
msgid "Enter line number, column number"
msgstr "輸入列號，行號"

#: src/search.c:1061
#, fuzzy
msgid "Invalid line or column number"
msgstr "輸入列號，行號"

#: src/search.c:1214
msgid "Not a bracket"
msgstr "並非一個括號"

#: src/search.c:1281
msgid "No matching bracket"
msgstr "無對應括號"

#: src/text.c:54
msgid "Mark Set"
msgstr "標記設定"

#: src/text.c:58
#, fuzzy
msgid "Mark Unset"
msgstr "標記解除"

#: src/text.c:432
msgid "Nothing in undo buffer!"
msgstr ""

#: src/text.c:444 src/text.c:566
#, c-format
msgid "Internal error: can't match line %d.  Please save your work"
msgstr ""

#: src/text.c:455 src/text.c:576
msgid "text add"
msgstr ""

#: src/text.c:464 src/text.c:586
#, fuzzy
msgid "text delete"
msgstr "下個檔案"

#: src/text.c:477 src/text.c:595
msgid "line split"
msgstr ""

#: src/text.c:488 src/text.c:606
msgid "line join"
msgstr ""

#: src/text.c:499 src/text.c:621
msgid "text cut"
msgstr ""

#: src/text.c:503 src/text.c:625
msgid "text uncut"
msgstr ""

#: src/text.c:507 src/text.c:635
#, fuzzy
msgid "text insert"
msgstr "下列"

#: src/text.c:525 src/text.c:629
#, fuzzy
msgid "text replace"
msgstr " (置換)"

#: src/text.c:531 src/text.c:641
msgid "Internal error: unknown type.  Please save your work"
msgstr ""

#: src/text.c:536
#, c-format
msgid "Undid action (%s)"
msgstr ""

#: src/text.c:551
msgid "Nothing to re-do!"
msgstr ""

#: src/text.c:555
msgid "Internal error: Redo setup failed.  Please save your work"
msgstr ""

#: src/text.c:646
#, c-format
msgid "Redid action (%s)"
msgstr ""

#: src/text.c:735
msgid "Could not pipe"
msgstr "管線功能無效"

#: src/text.c:762 src/text.c:2568 src/text.c:2715
msgid "Could not fork"
msgstr "執行功能無效"

#: src/text.c:891
msgid "Internal error: can't setup uncut.  Please save your work."
msgstr ""

#: src/text.c:898
msgid "Internal error: unknown type.  Please save your work."
msgstr ""

#: src/text.c:1802
#, c-format
msgid "Bad quote string %s: %s"
msgstr "不良引用字串 %s: %s"

#: src/text.c:2199
msgid "Can now UnJustify!"
msgstr "現在可以還原對齊！"

#: src/text.c:2394
msgid "Edit a replacement"
msgstr "編輯替代文字"

#: src/text.c:2480
msgid "Could not create pipe"
msgstr "無法建立管線功能"

#: src/text.c:2482
msgid "Creating misspelled word list, please wait..."
msgstr "正在建立錯字列表，請稍待..."

#: src/text.c:2574
msgid "Could not get size of pipe buffer"
msgstr "無法得知管線緩衝區大小"

#: src/text.c:2625
msgid "Error invoking \"spell\""
msgstr "呼叫 \"spell\" 錯誤"

#: src/text.c:2628
msgid "Error invoking \"sort -f\""
msgstr "呼叫 \"sort -f\" 錯誤"

#: src/text.c:2631
msgid "Error invoking \"uniq\""
msgstr "呼叫 \"uniq\" 錯誤"

#: src/text.c:2742
#, c-format
msgid "Error invoking \"%s\""
msgstr "呼叫 \"%s\" 錯誤"

#: src/text.c:2882
#, c-format
msgid "Spell checking failed: %s"
msgstr "拼字檢查失敗: %s"

#: src/text.c:2884
#, c-format
msgid "Spell checking failed: %s: %s"
msgstr "拼字檢查失敗: %s: %s"

#: src/text.c:2887
msgid "Finished checking spelling"
msgstr "拼字檢查結束"

#: src/text.c:2952
#, c-format
msgid "%sWords: %lu  Lines: %ld  Chars: %lu"
msgstr "%s字數: %lu  列數: %ld  字元數: %lu"

#: src/text.c:2953
msgid "In Selection:  "
msgstr "於選擇部份: "

#: src/utils.c:405 src/utils.c:417
msgid "nano is out of memory!"
msgstr "nano 已耗盡記憶體！"

#. TRANSLATORS: This is displayed during the input of a
#. * six-digit hexadecimal Unicode character code.
#: src/winio.c:1557
msgid "Unicode Input"
msgstr ""

#: src/winio.c:2149 src/winio.c:2153
msgid "Modified"
msgstr "已更動"

#: src/winio.c:2150
msgid "View"
msgstr "觀看"

#: src/winio.c:2164
msgid "DIR:"
msgstr "目錄:"

#: src/winio.c:2171
msgid "File:"
msgstr "檔案:"

#: src/winio.c:3234
#, c-format
msgid "line %ld/%ld (%d%%), col %lu/%lu (%d%%), char %lu/%lu (%d%%)"
msgstr "列 %ld/%ld (%d%%), 行 %lu/%lu (%d%%), 字元 %lu/%lu (%d%%)"

#: src/winio.c:3366
msgid "The nano text editor"
msgstr "nano 文字編輯器"

#: src/winio.c:3367
msgid "version"
msgstr "版本"

#: src/winio.c:3368
msgid "Brought to you by:"
msgstr "來自於:"

#: src/winio.c:3369
msgid "Special thanks to:"
msgstr "特別感謝:"

#: src/winio.c:3370
msgid "The Free Software Foundation"
msgstr "自由軟體基金會"

#: src/winio.c:3371
msgid "For ncurses:"
msgstr "ncurses 部份:"

#: src/winio.c:3372
msgid "and anyone else we forgot..."
msgstr "以及其他我們不記得的人..."

#: src/winio.c:3373
msgid "Thank you for using nano!"
msgstr "謝謝您使用 nano﹗"

#~ msgid "Prepending to %s failed: %s"
#~ msgstr "前引於 %s 時失敗: %s"

#~ msgid "Invoke the help menu"
#~ msgstr "呼叫輔助說明"

#~ msgid "Search for text within the editor"
#~ msgstr "搜尋編輯器中文字"

#~ msgid "Replace text within the editor"
#~ msgstr "置換編輯器中文字"

#~ msgid "Find matching bracket"
#~ msgstr "尋找對應括號"

#~ msgid "Make the current search/replace case (in)sensitive"
#~ msgstr "使目前搜尋與置換(不)區分大小寫"

#~ msgid "Make the current search/replace go backwards"
#~ msgstr "使目前搜尋與置換向後進行"

#~ msgid "Prepend to the current file"
#~ msgstr "前引於目前檔案"

#~ msgid "Back up original file when saving"
#~ msgstr "存檔時備份原始檔案"

#~ msgid "Insert into new buffer"
#~ msgstr "插入新的緩衝區"

#~ msgid "Space"
#~ msgstr "Space"

#~ msgid ""
#~ "Usage: nano [+LINE,COLUMN] [GNU long option] [option] [file]\n"
#~ "\n"
#~ msgstr ""
#~ "用法: nano [+列數,行數] [GNU 長選項] [選項] [檔案名稱]\n"
#~ "\n"

#~ msgid "Use more space for editing"
#~ msgstr "編輯時使用更多空間"

#~ msgid "Set fill cols to (wrap lines at) #cols"
#~ msgstr "設定行數填滿 (換列) 於 #行數"

#~ msgid "Duplicate syntax name %s"
#~ msgstr "重覆的語法名稱 %s"

#~ msgid "Come on, be reasonable"
#~ msgstr "別這樣，理性一點"

#~ msgid "Could not create temp file: %s"
#~ msgstr "無法建立暫存檔案: %s"

#~ msgid "Refusing zero-length regex match"
#~ msgstr "拒絕符合長度為零的正規表示式"