micropython/stm/lib/usb_dcd.c

479 lines
9.7 KiB
C

/**
******************************************************************************
* @file usb_dcd.c
* @author MCD Application Team
* @version V2.1.0
* @date 19-March-2012
* @brief Peripheral Device Interface Layer
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "usb_dcd.h"
#include "usb_bsp.h"
/** @addtogroup USB_OTG_DRIVER
* @{
*/
/** @defgroup USB_DCD
* @brief This file is the interface between EFSL ans Host mass-storage class
* @{
*/
/** @defgroup USB_DCD_Private_Defines
* @{
*/
/**
* @}
*/
/** @defgroup USB_DCD_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup USB_DCD_Private_Macros
* @{
*/
/**
* @}
*/
/** @defgroup USB_DCD_Private_Variables
* @{
*/
/**
* @}
*/
/** @defgroup USB_DCD_Private_FunctionPrototypes
* @{
*/
/**
* @}
*/
/** @defgroup USB_DCD_Private_Functions
* @{
*/
void DCD_Init(USB_OTG_CORE_HANDLE *pdev ,
USB_OTG_CORE_ID_TypeDef coreID)
{
uint32_t i;
USB_OTG_EP *ep;
USB_OTG_SelectCore (pdev , coreID);
pdev->dev.device_status = USB_OTG_DEFAULT;
pdev->dev.device_address = 0;
/* Init ep structure */
for (i = 0; i < pdev->cfg.dev_endpoints ; i++)
{
ep = &pdev->dev.in_ep[i];
/* Init ep structure */
ep->is_in = 1;
ep->num = i;
ep->tx_fifo_num = i;
/* Control until ep is actvated */
ep->type = EP_TYPE_CTRL;
ep->maxpacket = USB_OTG_MAX_EP0_SIZE;
ep->xfer_buff = 0;
ep->xfer_len = 0;
}
for (i = 0; i < pdev->cfg.dev_endpoints; i++)
{
ep = &pdev->dev.out_ep[i];
/* Init ep structure */
ep->is_in = 0;
ep->num = i;
ep->tx_fifo_num = i;
/* Control until ep is activated */
ep->type = EP_TYPE_CTRL;
ep->maxpacket = USB_OTG_MAX_EP0_SIZE;
ep->xfer_buff = 0;
ep->xfer_len = 0;
}
USB_OTG_DisableGlobalInt(pdev);
/*Init the Core (common init.) */
USB_OTG_CoreInit(pdev);
/* Force Device Mode*/
USB_OTG_SetCurrentMode(pdev, DEVICE_MODE);
/* Init Device */
USB_OTG_CoreInitDev(pdev);
/* Enable USB Global interrupt */
USB_OTG_EnableGlobalInt(pdev);
}
/**
* @brief Configure an EP
* @param pdev : Device instance
* @param epdesc : Endpoint Descriptor
* @retval : status
*/
uint32_t DCD_EP_Open(USB_OTG_CORE_HANDLE *pdev ,
uint8_t ep_addr,
uint16_t ep_mps,
uint8_t ep_type)
{
USB_OTG_EP *ep;
if ((ep_addr & 0x80) == 0x80)
{
ep = &pdev->dev.in_ep[ep_addr & 0x7F];
}
else
{
ep = &pdev->dev.out_ep[ep_addr & 0x7F];
}
ep->num = ep_addr & 0x7F;
ep->is_in = (0x80 & ep_addr) != 0;
ep->maxpacket = ep_mps;
ep->type = ep_type;
if (ep->is_in)
{
/* Assign a Tx FIFO */
ep->tx_fifo_num = ep->num;
}
/* Set initial data PID. */
if (ep_type == USB_OTG_EP_BULK )
{
ep->data_pid_start = 0;
}
USB_OTG_EPActivate(pdev , ep );
return 0;
}
/**
* @brief called when an EP is disabled
* @param pdev: device instance
* @param ep_addr: endpoint address
* @retval : status
*/
uint32_t DCD_EP_Close(USB_OTG_CORE_HANDLE *pdev , uint8_t ep_addr)
{
USB_OTG_EP *ep;
if ((ep_addr&0x80) == 0x80)
{
ep = &pdev->dev.in_ep[ep_addr & 0x7F];
}
else
{
ep = &pdev->dev.out_ep[ep_addr & 0x7F];
}
ep->num = ep_addr & 0x7F;
ep->is_in = (0x80 & ep_addr) != 0;
USB_OTG_EPDeactivate(pdev , ep );
return 0;
}
/**
* @brief DCD_EP_PrepareRx
* @param pdev: device instance
* @param ep_addr: endpoint address
* @param pbuf: pointer to Rx buffer
* @param buf_len: data length
* @retval : status
*/
uint32_t DCD_EP_PrepareRx( USB_OTG_CORE_HANDLE *pdev,
uint8_t ep_addr,
uint8_t *pbuf,
uint16_t buf_len)
{
USB_OTG_EP *ep;
ep = &pdev->dev.out_ep[ep_addr & 0x7F];
/*setup and start the Xfer */
ep->xfer_buff = pbuf;
ep->xfer_len = buf_len;
ep->xfer_count = 0;
ep->is_in = 0;
ep->num = ep_addr & 0x7F;
if (pdev->cfg.dma_enable == 1)
{
ep->dma_addr = (uint32_t)pbuf;
}
if ( ep->num == 0 )
{
USB_OTG_EP0StartXfer(pdev , ep);
}
else
{
USB_OTG_EPStartXfer(pdev, ep );
}
return 0;
}
/**
* @brief Transmit data over USB
* @param pdev: device instance
* @param ep_addr: endpoint address
* @param pbuf: pointer to Tx buffer
* @param buf_len: data length
* @retval : status
*/
uint32_t DCD_EP_Tx ( USB_OTG_CORE_HANDLE *pdev,
uint8_t ep_addr,
uint8_t *pbuf,
uint32_t buf_len)
{
USB_OTG_EP *ep;
ep = &pdev->dev.in_ep[ep_addr & 0x7F];
/* Setup and start the Transfer */
ep->is_in = 1;
ep->num = ep_addr & 0x7F;
ep->xfer_buff = pbuf;
ep->dma_addr = (uint32_t)pbuf;
ep->xfer_count = 0;
ep->xfer_len = buf_len;
if ( ep->num == 0 )
{
USB_OTG_EP0StartXfer(pdev , ep);
}
else
{
USB_OTG_EPStartXfer(pdev, ep );
}
return 0;
}
/**
* @brief Stall an endpoint.
* @param pdev: device instance
* @param epnum: endpoint address
* @retval : status
*/
uint32_t DCD_EP_Stall (USB_OTG_CORE_HANDLE *pdev, uint8_t epnum)
{
USB_OTG_EP *ep;
if ((0x80 & epnum) == 0x80)
{
ep = &pdev->dev.in_ep[epnum & 0x7F];
}
else
{
ep = &pdev->dev.out_ep[epnum];
}
ep->is_stall = 1;
ep->num = epnum & 0x7F;
ep->is_in = ((epnum & 0x80) == 0x80);
USB_OTG_EPSetStall(pdev , ep);
return (0);
}
/**
* @brief Clear stall condition on endpoints.
* @param pdev: device instance
* @param epnum: endpoint address
* @retval : status
*/
uint32_t DCD_EP_ClrStall (USB_OTG_CORE_HANDLE *pdev, uint8_t epnum)
{
USB_OTG_EP *ep;
if ((0x80 & epnum) == 0x80)
{
ep = &pdev->dev.in_ep[epnum & 0x7F];
}
else
{
ep = &pdev->dev.out_ep[epnum];
}
ep->is_stall = 0;
ep->num = epnum & 0x7F;
ep->is_in = ((epnum & 0x80) == 0x80);
USB_OTG_EPClearStall(pdev , ep);
return (0);
}
/**
* @brief This Function flushes the FIFOs.
* @param pdev: device instance
* @param epnum: endpoint address
* @retval : status
*/
uint32_t DCD_EP_Flush (USB_OTG_CORE_HANDLE *pdev , uint8_t epnum)
{
if ((epnum & 0x80) == 0x80)
{
USB_OTG_FlushTxFifo(pdev, epnum & 0x7F);
}
else
{
USB_OTG_FlushRxFifo(pdev);
}
return (0);
}
/**
* @brief This Function set USB device address
* @param pdev: device instance
* @param address: new device address
* @retval : status
*/
void DCD_EP_SetAddress (USB_OTG_CORE_HANDLE *pdev, uint8_t address)
{
USB_OTG_DCFG_TypeDef dcfg;
dcfg.d32 = 0;
dcfg.b.devaddr = address;
USB_OTG_MODIFY_REG32( &pdev->regs.DREGS->DCFG, 0, dcfg.d32);
}
/**
* @brief Connect device (enable internal pull-up)
* @param pdev: device instance
* @retval : None
*/
void DCD_DevConnect (USB_OTG_CORE_HANDLE *pdev)
{
#ifndef USE_OTG_MODE
USB_OTG_DCTL_TypeDef dctl;
dctl.d32 = USB_OTG_READ_REG32(&pdev->regs.DREGS->DCTL);
/* Connect device */
dctl.b.sftdiscon = 0;
USB_OTG_WRITE_REG32(&pdev->regs.DREGS->DCTL, dctl.d32);
USB_OTG_BSP_mDelay(3);
#endif
}
/**
* @brief Disconnect device (disable internal pull-up)
* @param pdev: device instance
* @retval : None
*/
void DCD_DevDisconnect (USB_OTG_CORE_HANDLE *pdev)
{
#ifndef USE_OTG_MODE
USB_OTG_DCTL_TypeDef dctl;
dctl.d32 = USB_OTG_READ_REG32(&pdev->regs.DREGS->DCTL);
/* Disconnect device for 3ms */
dctl.b.sftdiscon = 1;
USB_OTG_WRITE_REG32(&pdev->regs.DREGS->DCTL, dctl.d32);
USB_OTG_BSP_mDelay(3);
#endif
}
/**
* @brief returns the EP Status
* @param pdev : Selected device
* epnum : endpoint address
* @retval : EP status
*/
uint32_t DCD_GetEPStatus(USB_OTG_CORE_HANDLE *pdev ,uint8_t epnum)
{
USB_OTG_EP *ep;
uint32_t Status = 0;
if ((0x80 & epnum) == 0x80)
{
ep = &pdev->dev.in_ep[epnum & 0x7F];
}
else
{
ep = &pdev->dev.out_ep[epnum];
}
Status = USB_OTG_GetEPStatus(pdev ,ep);
/* Return the current status */
return Status;
}
/**
* @brief Set the EP Status
* @param pdev : Selected device
* Status : new Status
* epnum : EP address
* @retval : None
*/
void DCD_SetEPStatus (USB_OTG_CORE_HANDLE *pdev , uint8_t epnum , uint32_t Status)
{
USB_OTG_EP *ep;
if ((0x80 & epnum) == 0x80)
{
ep = &pdev->dev.in_ep[epnum & 0x7F];
}
else
{
ep = &pdev->dev.out_ep[epnum];
}
USB_OTG_SetEPStatus(pdev ,ep , Status);
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/