Commit Graph

12 Commits

Author SHA1 Message Date
Damien George 1d7fb82f0a stmhal: Change 64-bit arithmetic to 32-bit for SD card block addressing.
By measuring SD card addresses in blocks and not bytes, one can get away
with using 32-bit numbers.

This patch also uses proper atomic lock/unlock around SD card
read/write, adds SD.info() function, and gives error code for failed
read/writes.
2014-09-15 23:49:57 +01:00
Damien George 28817725fc stmhal: Replace magic number 3 with CDC_IN_EP define. 2014-04-16 23:17:29 +01:00
Damien George 6d983539bc stmhal: Improve flash storage cache management.
Internal flash used for the filesystem is now written (from the cache)
only after a 5s delay, or when a file is closed, or when the drive is
unmounted from the host.  This delay means that multiple writes can
accumulate in the cache, and leads to less writes to the flash, making
it last longer.

It's implemented by a high-priority interrupt that takes care of flash
erase and write, and flushing the cache.

This is still only an interim solution for the flash filesystem.  It
eventually needs to be replaced with something that uses less RAM for
the cache, something that can use more of the flash, and something that
does proper wear levelling.
2014-04-16 23:08:36 +01:00
Damien George 9699ea6a2f stmhal: Fix USB MSC so that it unmounts correctly on Mac OS X.
Mac OS X sends a SCSI command to remove the medium when it unmounts a
drive.  If this command is not honoured, then OS X will automatically
remount the drive, making it impossible to eject.  This patch disables
the USB MSC when the right SCSI command is sent.
2014-04-15 19:56:32 +01:00
Damien George 038df43183 stmhal: Implement selector for USB device mode; improve boot up.
Can now choose at boot up whether the USB device is CDC+MSC or CDC+HID.
Choice is made by an option in boot.py, with default being CDC+MSC.
HID+MSC is not currently supported, but should be easy to implement.

Boot up now has ability to change the reset mode: hold down USR switch
while booting and LEDs will count from 1 to 7 to indicate the boot mode.
Release USR when correct mode is selected.  Current modes are 1 (normal
boot), 2 (safe mode), 3 (reset FS mode).
2014-03-30 00:00:15 +00:00
Damien George 64563e39b3 stmhal: Add CDC+HID USB device.
The HID device must appear before the CDC in order for both to work at
the same time.

Whilst the code is working, it's not currently used.
2014-03-29 21:57:30 +00:00
Damien George 2fb37847a7 stmhal: Tidy up USB CDC+MSC device some more. 2014-03-22 13:21:58 +00:00
Damien George a6787edcea stmhal: Tidy up USB device configuration. Make it use less RAM. 2014-03-22 12:46:23 +00:00
Damien George fb25c2d95f stmhal: USB CDC and MSC device work together. 2014-03-22 12:32:54 +00:00
Damien George 8913c04831 stmhal: Add support for USB MSC device.
This gives a functioning, independent MSC device.
2014-03-21 23:32:01 +00:00
Damien George b30c02afa0 stmhal: Get USB enumerating a CDC device.
Enumerates CDC device over USB, but doesn't transmit/receive yet.
2014-03-14 00:30:37 +00:00
Dave Hylands dd38d90724 Initial checkin with STM HAL
This compiles and links, but hasn't been tested on a board
yet and even if it was run, it doesn't currently do anything.
2014-03-11 23:55:41 -07:00