cc3200: Update README.md to add step for flashing the bootloader.

This commit is contained in:
danicampora 2015-02-21 22:38:12 +01:00
parent 993f067fa2
commit fe2eb5f58a
1 changed files with 3 additions and 2 deletions

View File

@ -25,11 +25,13 @@ make BTARGET=bootloader BTYPE=release
```
## Flashing the CC3200
- Make sure that you have built both the *bootloader* and the *application* in **release** mode.
- Make sure the SOP2 jumper is in position.
- Open CCS_Uniflash and connect to the board (by default on port 22).
- Format the serial flash (select 1MB size in case of the CC3200-LAUNCHXL, leave the rest unchecked).
- Mark the following files for erasing: `/cert/ca.pem`, `/cert/client.pm`, `/cert/private.key` and `/tmp/pac.bin`.
- Add a new file with the name of /sys/factimg.bin, and select the correct URL to point to cc3200\build\<BOARD_NAME>\MCUIMG.BIN.
- Add a new file with the name of /sys/mcuimg.bin, and select the URL to point to cc3200\bootmgr\build\<BOARD_NAME>\bootloader.bin.
- Add another file with the name of /sys/factimg.bin, and select the URL to point to cc3200\build\<BOARD_NAME>\MCUIMG.BIN.
- Click "Program" to apply all changes.
- Flash the latest service pack (servicepack_1.0.0.1.2.bin) using the "Service Pack Update" button.
- Close CCS_Uniflash, remove the SOP2 jumper and reset the board.
@ -79,4 +81,3 @@ sure that encryption is set to: "Only use plain FTP (insecure)". In the Transfer
to one, otherwise FileZilla will try to open a second command connection when retrieving and saving files, and for simplicity and
to reduce code size, only one command and one data connections are possible.