mirrors/micropython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

mimxrt: Rework flash configuration.

Browse Source 
- Moves definition of BOARD_FLASH_SIZE and other header files related to
	flash configuration into the Makefile.
- Adds board specific clock_config.h.
- Adds board.h, pin_mux.h, and peripherals.h as they are
	required by NXP MCU SDK in order to use our own clock_config.h.
- Renames board specific FlexSPI configuration files.
- Updates flash frequency of MIMXRT1020_EVK
- Creates separated flash_config files for QSPI NOR and
	QSPI Hyper flash.
- Unifies VFS start address to be @ 1M for 1010 and 1020 boards.
- Unifies 1050EVK boards
- Adds support to both NOR and HyperFlash on boards with
	both capabilities.
- Adds automatic FlexRAM initialization to start-up code based on
	linker script and NXP HAL.
- Applies code formatting to all files in mimxrt port.

With this change the flash configuration is restructured and
organized. This simplifies the configuration process and
provides a better overview of each board's settings. With the integration
of clock_config.h, board.h, pin_mux.h, and peripherals.h we gain better
control of the settings and clock configurations. Furthermore the
implementation of an explicit FlexRAM setup improves the system
performance and allows for performance tuning.

Signed-off-by: Philipp Ebensberger
This commit is contained in:
Philipp Ebensberger 2021-08-20 21:41:58 +02:00
parent 426785a19e
commit 0d7366c912
82 changed files with 4830 additions and 3633 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

63
ports/mimxrt/Makefile
View File

@ -13,6 +13,17 @@ endif
include ../../py/mkenv.mk
include $(BOARD_DIR)/mpconfigboard.mk
# Set optional flash configuration variables
BOARD_FLASH_RESERVED ?=
LD_MEMORY_CONFIG_DEFINES += \
BOARD_FLASH_TYPE=$(BOARD_FLASH_TYPE) \
BOARD_FLASH_SIZE=$(BOARD_FLASH_SIZE)
ifdef $(BOARD_FLASH_RESERVED)
LD_MEMORY_CONFIG_DEFINES += BOARD_FLASH_RESERVED=$(BOARD_FLASH_RESERVED)
endif
# Qstr definitions (must come before including py.mk)
QSTR_DEFS = qstrdefsport.h
QSTR_GLOBAL_DEPENDENCIES = $(BOARD_DIR)/mpconfigboard.h
@ -28,9 +39,10 @@ include $(TOP)/py/py.mk
GIT_SUBMODULES = lib/tinyusb lib/nxp_driver
MCU_DIR = lib/nxp_driver/sdk/devices/$(MCU_SERIES)
LD_FILES = boards/$(BOARD)/$(BOARD).ld boards/$(MCU_SERIES).ld boards/common.ld
LD_FILES = boards/$(MCU_SERIES).ld boards/common.ld
MAKE_PINS = boards/make-pins.py
MAKE_FLEXRAM_LD = boards/make-flexram-config.py
BOARD_PINS = $(BOARD_DIR)/pins.csv
AF_FILE = boards/$(MCU_SERIES)_af.csv
PREFIX_FILE = boards/mimxrt_prefix.c
@ -39,18 +51,19 @@ GEN_PINS_HDR = $(HEADER_BUILD)/pins.h
GEN_PINS_QSTR = $(BUILD)/pins_qstr.h
GEN_PINS_AF_CONST = $(HEADER_BUILD)/pins_af_const.h
GEN_PINS_AF_PY = $(BUILD)/pins_af.py
GEN_FLEXRAM_CONFIG_SRC = $(BUILD)/flexram_config.s
# mcu driver cause following warnings
#CFLAGS += -Wno-error=float-equal -Wno-error=nested-externs
CFLAGS += -Wno-error=unused-parameter
INC += -I.
INC += -Ihal
INC += -I$(BOARD_DIR)
INC += -I$(BUILD)
INC += -I$(TOP)
INC += -I$(TOP)/$(MCU_DIR)
INC += -I$(TOP)/$(MCU_DIR)/drivers
INC += -I$(TOP)/$(MCU_DIR)/project_template
INC += -I$(TOP)/lib/cmsis/inc
INC += -I$(TOP)/lib/oofatfs
INC += -I$(TOP)/lib/tinyusb/hw
@ -67,10 +80,20 @@ CFLAGS += -DXIP_EXTERNAL_FLASH=1 \
-D__STARTUP_CLEAR_BSS \
-D__STARTUP_INITIALIZE_RAMFUNCTION \
-D__START=main \
-DCPU_HEADER_H='<$(MCU_SERIES).h>'
-DCPU_HEADER_H='<$(MCU_SERIES).h>' \
-DBOARD_FLASH_SIZE=$(BOARD_FLASH_SIZE) \
-DBOARD_FLASH_CONFIG_HEADER_H=\"$(BOARD)_flexspi_nor_config.h\"
ifeq ($(BOARD_FLASH_TYPE), qspi_nor)
CFLAGS += -DBOARD_FLASH_OPS_HEADER_H=\"hal/flexspi_nor_flash.h\"
else ifeq ($(BOARD_FLASH_TYPE), hyperflash)
CFLAGS += -DBOARD_FLASH_OPS_HEADER_H=\"hal/flexspi_hyper_flash.h\"
endif
ifeq ($(MICROPY_PY_MACHINE_SDCARD),1)
CFLAGS += -DMICROPY_PY_MACHINE_SDCARD=1
endif
CFLAGS += $(CFLAGS_MOD) $(CFLAGS_EXTRA)
# Configure floating point support
@ -88,7 +111,8 @@ endif
SUPPORTS_HARDWARE_FP_SINGLE = 0
SUPPORTS_HARDWARE_FP_DOUBLE = 0
LDFLAGS = $(addprefix -T,$(LD_FILES)) -Map=$@.map --cref --print-memory-usage
LDFLAGS = -Map=$@.map --cref --print-memory-usage
LDDEFINES = $(addprefix -D, $(LD_MEMORY_CONFIG_DEFINES))
LIBS = $(shell $(CC) $(CFLAGS) -print-libgcc-file-name)
# Tune for Debugging or Optimization
@ -144,7 +168,6 @@ SRC_HAL_IMX_C += $(MCU_DIR)/drivers/fsl_usdhc.c
endif
SRC_C += \
$(BOARD_DIR)/flash_config.c \
board_init.c \
dma_channel.c \
drivers/bus/softspi.c \
@ -184,6 +207,18 @@ SRC_C += \
$(SRC_TINYUSB_C) \
$(SRC_HAL_IMX_C) \
ifeq ($(BOARD_FLASH_TYPE), qspi_nor)
SRC_C += \
hal/flexspi_nor_flash.c \
$(BOARD_DIR)/qspi_nor_flash_config.c
else ifeq ($(BOARD_FLASH_TYPE), hyperflash)
SRC_C += \
hal/flexspi_hyper_flash.c \
$(BOARD_DIR)/qspi_hyper_flash_config.c
else
$(error Error: Unknown board flash type $(BOARD_FLASH_TYPE))
endif
ifeq ($(MICROPY_FLOAT_IMPL),double)
LIBM_SRC_C += $(addprefix lib/libm_dbl/,\
__cos.c \
@ -277,7 +312,9 @@ ifeq ($(MICROPY_FLOAT_IMPL),double)
$(LIBM_O): CFLAGS := $(filter-out -Wdouble-promotion -Wfloat-conversion, $(CFLAGS))
endif
SRC_SS += $(MCU_DIR)/gcc/startup_$(MCU_SERIES).S
SRC_SS = \
$(MCU_DIR)/gcc/startup_$(MCU_SERIES).S \
hal/resethandler_MIMXRT10xx.S
SRC_S += shared/runtime/gchelper_m3.s \
@ -316,8 +353,10 @@ $(BUILD)/lib/tinyusb/src/device/usbd.o: CFLAGS += -Wno-missing-braces
all: $(BUILD)/firmware.hex $(BUILD)/firmware.bin
$(BUILD)/firmware.elf: $(OBJ)
$(ECHO) "PREPROCESS LINK $@"
$(Q)$(CC) -E -x c $(LDDEFINES) $(LD_FILES) | grep -v '^#' > $(BUILD)/link.ld
$(ECHO) "LINK $@"
$(Q)$(LD) $(LDFLAGS) -o $@ $^ $(LIBS)
$(Q)$(LD) -T$(BUILD)/link.ld $(LDFLAGS) -o $@ $^ $(LIBS)
$(Q)$(SIZE) $@
$(BUILD)/firmware.bin: $(BUILD)/firmware.elf
@ -326,17 +365,23 @@ $(BUILD)/firmware.bin: $(BUILD)/firmware.elf
$(BUILD)/firmware.hex: $(BUILD)/firmware.elf
$(Q)$(OBJCOPY) -O ihex -R .eeprom $< $@
# Making OBJ use an order-only depenedency on the generated pins.h file
# Making OBJ use an order-only dependency on the generated pins.h file
# has the side effect of making the pins.h file before we actually compile
# any of the objects. The normal dependency generation will deal with the
# case when pins.h is modified. But when it doesn't exist, we don't know
# which source files might need it.
$(OBJ): | $(GEN_PINS_HDR)
$(OBJ): | $(GEN_PINS_HDR) $(GEN_FLEXRAM_CONFIG_SRC)
# With conditional pins, we may need to regenerate qstrdefs.h when config
# options change.
$(HEADER_BUILD)/qstrdefs.generated.h: $(BOARD_DIR)/mpconfigboard.h
$(GEN_FLEXRAM_CONFIG_SRC):
$(ECHO) "Create $@"
$(Q)$(PYTHON) $(MAKE_FLEXRAM_LD) -d $(TOP)/$(MCU_DIR)/$(MCU_SERIES).h \
-f $(TOP)/$(MCU_DIR)/$(MCU_SERIES)_features.h -l boards/$(MCU_SERIES).ld -c $(MCU_SERIES) > $(GEN_FLEXRAM_CONFIG_SRC)
# Use a pattern rule here so that make will only call make-pins.py once to make
# both pins_gen.c and pins.h
$(BUILD)/%_gen.c $(HEADER_BUILD)/%.h: $(BOARD_PINS) $(MAKE_PINS) $(AF_FILE) $(PREFIX_FILE) | $(HEADER_BUILD)

1
ports/mimxrt/boards/MIMXRT1010_EVK/MIMXRT1010_EVK.ld
View File

@ -1 +0,0 @@
flash_size = 16M;

257
ports/mimxrt/boards/MIMXRT1010_EVK/MIMXRT1010_EVK_flexspi_nor_config.h Normal file
View File

@ -0,0 +1,257 @@
/*
* Copyright 2019 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
// Based on tinyusb/hw/bsp/teensy_40/evkmimxrt1010_flexspi_nor_config.h
#ifndef __EVKMIMXRT1011_FLEXSPI_NOR_CONFIG__
#define __EVKMIMXRT1011_FLEXSPI_NOR_CONFIG__
#include <stdint.h>
#include <stdbool.h>
#include "fsl_common.h"
/*! @name Driver version */
/*@{*/
/*! @brief XIP_BOARD driver version 2.0.0. */
#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0))
/*@}*/
/* FLEXSPI memory config block related defintions */
#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian
#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0
#define FLEXSPI_CFG_BLK_SIZE (512)
/* FLEXSPI Feature related definitions */
#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1
/* Lookup table related defintions */
#define CMD_INDEX_READ 0
#define CMD_INDEX_READSTATUS 1
#define CMD_INDEX_WRITEENABLE 2
#define CMD_INDEX_WRITE 4
#define CMD_LUT_SEQ_IDX_READ 0
#define CMD_LUT_SEQ_IDX_READSTATUS 1
#define CMD_LUT_SEQ_IDX_WRITEENABLE 3
#define CMD_LUT_SEQ_IDX_WRITE 9
#define CMD_SDR 0x01
#define CMD_DDR 0x21
#define RADDR_SDR 0x02
#define RADDR_DDR 0x22
#define CADDR_SDR 0x03
#define CADDR_DDR 0x23
#define MODE1_SDR 0x04
#define MODE1_DDR 0x24
#define MODE2_SDR 0x05
#define MODE2_DDR 0x25
#define MODE4_SDR 0x06
#define MODE4_DDR 0x26
#define MODE8_SDR 0x07
#define MODE8_DDR 0x27
#define WRITE_SDR 0x08
#define WRITE_DDR 0x28
#define READ_SDR 0x09
#define READ_DDR 0x29
#define LEARN_SDR 0x0A
#define LEARN_DDR 0x2A
#define DATSZ_SDR 0x0B
#define DATSZ_DDR 0x2B
#define DUMMY_SDR 0x0C
#define DUMMY_DDR 0x2C
#define DUMMY_RWDS_SDR 0x0D
#define DUMMY_RWDS_DDR 0x2D
#define JMP_ON_CS 0x1F
#define STOP 0
#define FLEXSPI_1PAD 0
#define FLEXSPI_2PAD 1
#define FLEXSPI_4PAD 2
#define FLEXSPI_8PAD 3
#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \
(FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \
FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1))
// !@brief Definitions for FlexSPI Serial Clock Frequency
typedef enum _FlexSpiSerialClockFreq
{
kFlexSpiSerialClk_30MHz = 1,
kFlexSpiSerialClk_50MHz = 2,
kFlexSpiSerialClk_60MHz = 3,
kFlexSpiSerialClk_75MHz = 4,
kFlexSpiSerialClk_80MHz = 5,
kFlexSpiSerialClk_100MHz = 6,
kFlexSpiSerialClk_120MHz = 7,
kFlexSpiSerialClk_133MHz = 8,
} flexspi_serial_clk_freq_t;
// !@brief FlexSPI clock configuration type
enum
{
kFlexSpiClk_SDR, // !< Clock configure for SDR mode
kFlexSpiClk_DDR, // !< Clock configurat for DDR mode
};
// !@brief FlexSPI Read Sample Clock Source definition
typedef enum _FlashReadSampleClkSource
{
kFlexSPIReadSampleClk_LoopbackInternally = 0,
kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1,
kFlexSPIReadSampleClk_LoopbackFromSckPad = 2,
kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3,
} flexspi_read_sample_clk_t;
// !@brief Misc feature bit definitions
enum
{
kFlexSpiMiscOffset_DiffClkEnable = 0, // !< Bit for Differential clock enable
kFlexSpiMiscOffset_Ck2Enable = 1, // !< Bit for CK2 enable
kFlexSpiMiscOffset_ParallelEnable = 2, // !< Bit for Parallel mode enable
kFlexSpiMiscOffset_WordAddressableEnable = 3, // !< Bit for Word Addressable enable
kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, // !< Bit for Safe Configuration Frequency enable
kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, // !< Bit for Pad setting override enable
kFlexSpiMiscOffset_DdrModeEnable = 6, // !< Bit for DDR clock confiuration indication.
};
// !@brief Flash Type Definition
enum
{
kFlexSpiDeviceType_SerialNOR = 1, // !< Flash devices are Serial NOR
kFlexSpiDeviceType_SerialNAND = 2, // !< Flash devices are Serial NAND
kFlexSpiDeviceType_SerialRAM = 3, // !< Flash devices are Serial RAM/HyperFLASH
kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, // !< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND
kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, // !< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs
};
// !@brief Flash Pad Definitions
enum
{
kSerialFlash_1Pad = 1,
kSerialFlash_2Pads = 2,
kSerialFlash_4Pads = 4,
kSerialFlash_8Pads = 8,
};
// !@brief FlexSPI LUT Sequence structure
typedef struct _lut_sequence
{
uint8_t seqNum; // !< Sequence Number, valid number: 1-16
uint8_t seqId; // !< Sequence Index, valid number: 0-15
uint16_t reserved;
} flexspi_lut_seq_t;
// !@brief Flash Configuration Command Type
enum
{
kDeviceConfigCmdType_Generic, // !< Generic command, for example: configure dummy cycles, drive strength, etc
kDeviceConfigCmdType_QuadEnable, // !< Quad Enable command
kDeviceConfigCmdType_Spi2Xpi, // !< Switch from SPI to DPI/QPI/OPI mode
kDeviceConfigCmdType_Xpi2Spi, // !< Switch from DPI/QPI/OPI to SPI mode
kDeviceConfigCmdType_Spi2NoCmd, // !< Switch to 0-4-4/0-8-8 mode
kDeviceConfigCmdType_Reset, // !< Reset device command
};
// !@brief FlexSPI Memory Configuration Block
typedef struct _FlexSPIConfig
{
uint32_t tag; // !< [0x000-0x003] Tag, fixed value 0x42464346UL
uint32_t version; // !< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
uint32_t reserved0; // !< [0x008-0x00b] Reserved for future use
uint8_t readSampleClkSrc; // !< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
uint8_t csHoldTime; // !< [0x00d-0x00d] CS hold time, default value: 3
uint8_t csSetupTime; // !< [0x00e-0x00e] CS setup time, default value: 3
uint8_t columnAddressWidth; // !< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For
// ! Serial NAND, need to refer to datasheet
uint8_t deviceModeCfgEnable; // !< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
uint8_t deviceModeType; // !< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch,
// ! Generic configuration, etc.
uint16_t waitTimeCfgCommands; // !< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for
// ! DPI/QPI/OPI switch or reset command
flexspi_lut_seq_t deviceModeSeq; // !< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt
// ! sequence number, [31:16] Reserved
uint32_t deviceModeArg; // !< [0x018-0x01b] Argument/Parameter for device configuration
uint8_t configCmdEnable; // !< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
uint8_t configModeType[3]; // !< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
flexspi_lut_seq_t
configCmdSeqs[3]; // !< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
uint32_t reserved1; // !< [0x02c-0x02f] Reserved for future use
uint32_t configCmdArgs[3]; // !< [0x030-0x03b] Arguments/Parameters for device Configuration commands
uint32_t reserved2; // !< [0x03c-0x03f] Reserved for future use
uint32_t controllerMiscOption; // !< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more
// ! details
uint8_t deviceType; // !< [0x044-0x044] Device Type: See Flash Type Definition for more details
uint8_t sflashPadType; // !< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
uint8_t serialClkFreq; // !< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot
// ! Chapter for more details
uint8_t lutCustomSeqEnable; // !< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot
// ! be done using 1 LUT sequence, currently, only applicable to HyperFLASH
uint32_t reserved3[2]; // !< [0x048-0x04f] Reserved for future use
uint32_t sflashA1Size; // !< [0x050-0x053] Size of Flash connected to A1
uint32_t sflashA2Size; // !< [0x054-0x057] Size of Flash connected to A2
uint32_t sflashB1Size; // !< [0x058-0x05b] Size of Flash connected to B1
uint32_t sflashB2Size; // !< [0x05c-0x05f] Size of Flash connected to B2
uint32_t csPadSettingOverride; // !< [0x060-0x063] CS pad setting override value
uint32_t sclkPadSettingOverride; // !< [0x064-0x067] SCK pad setting override value
uint32_t dataPadSettingOverride; // !< [0x068-0x06b] data pad setting override value
uint32_t dqsPadSettingOverride; // !< [0x06c-0x06f] DQS pad setting override value
uint32_t timeoutInMs; // !< [0x070-0x073] Timeout threshold for read status command
uint32_t commandInterval; // !< [0x074-0x077] CS deselect interval between two commands
uint16_t dataValidTime[2]; // !< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
uint16_t busyOffset; // !< [0x07c-0x07d] Busy offset, valid value: 0-31
uint16_t busyBitPolarity; // !< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 -
// ! busy flag is 0 when flash device is busy
uint32_t lookupTable[64]; // !< [0x080-0x17f] Lookup table holds Flash command sequences
flexspi_lut_seq_t lutCustomSeq[12]; // !< [0x180-0x1af] Customizable LUT Sequences
uint32_t reserved4[4]; // !< [0x1b0-0x1bf] Reserved for future use
} flexspi_mem_config_t;
/* */
#define NOR_CMD_LUT_SEQ_IDX_READ_NORMAL 0
#define NOR_CMD_LUT_SEQ_IDX_READSTATUSREG 1
#define NOR_CMD_LUT_SEQ_IDX_READ_FAST_QUAD 2
#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE 3
#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI 4
#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5
#define NOR_CMD_LUT_SEQ_IDX_WRITESTATUSREG 6
#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM_QUAD 7
#define NOR_CMD_LUT_SEQ_IDX_READID 8
#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM 9
#define NOR_CMD_LUT_SEQ_IDX_ENTERQPI 10
#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11
#define NOR_CMD_LUT_SEQ_IDX_EXITQPI 12
/*
* Serial NOR configuration block
*/
typedef struct _flexspi_nor_config
{
flexspi_mem_config_t memConfig; // !< Common memory configuration info via FlexSPI
uint32_t pageSize; // !< Page size of Serial NOR
uint32_t sectorSize; // !< Sector size of Serial NOR
uint8_t ipcmdSerialClkFreq; // !< Clock frequency for IP command
uint8_t isUniformBlockSize; // !< Sector/Block size is the same
uint8_t reserved0[2]; // !< Reserved for future use
uint8_t serialNorType; // !< Serial NOR Flash type: 0/1/2/3
uint8_t needExitNoCmdMode; // !< Need to exit NoCmd mode before other IP command
uint8_t halfClkForNonReadCmd; // !< Half the Serial Clock for non-read command: true/false
uint8_t needRestoreNoCmdMode; // !< Need to Restore NoCmd mode after IP commmand execution
uint32_t blockSize; // !< Block size
uint32_t reserve2[11]; // !< Reserved for future use
} flexspi_nor_config_t;
#define FLASH_BUSY_STATUS_POL 0
#define FLASH_BUSY_STATUS_OFFSET 0
#ifdef __cplusplus
extern "C" {
#endif
#ifdef __cplusplus
}
#endif
#endif /* __EVKMIMXRT1011_FLEXSPI_NOR_CONFIG__ */

104
ports/mimxrt/boards/MIMXRT1010_EVK/clock_config.h Normal file
View File

@ -0,0 +1,104 @@
/*
* Copyright 2019 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef _CLOCK_CONFIG_H_
#define _CLOCK_CONFIG_H_
#include "fsl_common.h"
/*******************************************************************************
* Definitions
******************************************************************************/
#define BOARD_XTAL0_CLK_HZ 24000000U /*!< Board xtal0 frequency in Hz */
#define BOARD_XTAL32K_CLK_HZ 32768U /*!< Board xtal32k frequency in Hz */
/*******************************************************************************
************************ BOARD_InitBootClocks function ************************
******************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif /* __cplusplus*/
/*!
* @brief This function executes default configuration of clocks.
*
*/
void BOARD_InitBootClocks(void);
#if defined(__cplusplus)
}
#endif /* __cplusplus*/
/*******************************************************************************
********************** Configuration BOARD_BootClockRUN ***********************
******************************************************************************/
/*******************************************************************************
* Definitions for BOARD_BootClockRUN configuration
******************************************************************************/
#define BOARD_BOOTCLOCKRUN_CORE_CLOCK 500000000U /*!< Core clock frequency: 500000000Hz */
/* Clock outputs (values are in Hz): */
#define BOARD_BOOTCLOCKRUN_ADC_ALT_CLK 40000000UL
#define BOARD_BOOTCLOCKRUN_CKIL_SYNC_CLK_ROOT 32768UL
#define BOARD_BOOTCLOCKRUN_CLKO1_CLK 0UL
#define BOARD_BOOTCLOCKRUN_CLKO2_CLK 0UL
#define BOARD_BOOTCLOCKRUN_CLK_1M 1000000UL
#define BOARD_BOOTCLOCKRUN_CLK_24M 24000000UL
#define BOARD_BOOTCLOCKRUN_CORE_CLK_ROOT 500000000UL
#define BOARD_BOOTCLOCKRUN_ENET_500M_REF_CLK 500000000UL
#define BOARD_BOOTCLOCKRUN_FLEXIO1_CLK_ROOT 30000000UL
#define BOARD_BOOTCLOCKRUN_FLEXSPI_CLK_ROOT 132000000UL
#define BOARD_BOOTCLOCKRUN_GPT1_IPG_CLK_HIGHFREQ 62500000UL
#define BOARD_BOOTCLOCKRUN_GPT2_IPG_CLK_HIGHFREQ 62500000UL
#define BOARD_BOOTCLOCKRUN_IPG_CLK_ROOT 125000000UL
#define BOARD_BOOTCLOCKRUN_LPI2C_CLK_ROOT 60000000UL
#define BOARD_BOOTCLOCKRUN_LPSPI_CLK_ROOT 105600000UL
#define BOARD_BOOTCLOCKRUN_MQS_MCLK 63529411UL
#define BOARD_BOOTCLOCKRUN_PERCLK_CLK_ROOT 62500000UL
#define BOARD_BOOTCLOCKRUN_SAI1_CLK_ROOT 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI1_MCLK1 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI1_MCLK2 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI1_MCLK3 30000000UL
#define BOARD_BOOTCLOCKRUN_SAI3_CLK_ROOT 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI3_MCLK1 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI3_MCLK2 0UL
#define BOARD_BOOTCLOCKRUN_SAI3_MCLK3 30000000UL
#define BOARD_BOOTCLOCKRUN_SPDIF0_CLK_ROOT 30000000UL
#define BOARD_BOOTCLOCKRUN_SPDIF0_EXTCLK_OUT 0UL
#define BOARD_BOOTCLOCKRUN_TRACE_CLK_ROOT 117333333UL
#define BOARD_BOOTCLOCKRUN_UART_CLK_ROOT 80000000UL
#define BOARD_BOOTCLOCKRUN_USBPHY_CLK 0UL
/*! @brief Usb1 PLL set for BOARD_BootClockRUN configuration.
*/
extern const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN;
/*! @brief Sys PLL for BOARD_BootClockRUN configuration.
*/
extern const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN;
/*! @brief Enet PLL set for BOARD_BootClockRUN configuration.
*/
extern const clock_enet_pll_config_t enetPllConfig_BOARD_BootClockRUN;
/*******************************************************************************
* API for BOARD_BootClockRUN configuration
******************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif /* __cplusplus*/
/*!
* @brief This function executes configuration of clocks.
*
*/
void BOARD_BootClockRUN(void);
#if defined(__cplusplus)
}
#endif /* __cplusplus*/
#endif /* _CLOCK_CONFIG_H_ */

257
ports/mimxrt/boards/MIMXRT1010_EVK/evkmimxrt1010_flexspi_nor_config.h
View File

@ -1,257 +0,0 @@
/*
* Copyright 2019 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
// Based on tinyusb/hw/bsp/teensy_40/evkmimxrt1010_flexspi_nor_config.h
#ifndef __EVKMIMXRT1011_FLEXSPI_NOR_CONFIG__
#define __EVKMIMXRT1011_FLEXSPI_NOR_CONFIG__
#include <stdint.h>
#include <stdbool.h>
#include "fsl_common.h"
/*! @name Driver version */
/*@{*/
/*! @brief XIP_BOARD driver version 2.0.0. */
#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0))
/*@}*/
/* FLEXSPI memory config block related defintions */
#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian
#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0
#define FLEXSPI_CFG_BLK_SIZE (512)
/* FLEXSPI Feature related definitions */
#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1
/* Lookup table related defintions */
#define CMD_INDEX_READ 0
#define CMD_INDEX_READSTATUS 1
#define CMD_INDEX_WRITEENABLE 2
#define CMD_INDEX_WRITE 4
#define CMD_LUT_SEQ_IDX_READ 0
#define CMD_LUT_SEQ_IDX_READSTATUS 1
#define CMD_LUT_SEQ_IDX_WRITEENABLE 3
#define CMD_LUT_SEQ_IDX_WRITE 9
#define CMD_SDR 0x01
#define CMD_DDR 0x21
#define RADDR_SDR 0x02
#define RADDR_DDR 0x22
#define CADDR_SDR 0x03
#define CADDR_DDR 0x23
#define MODE1_SDR 0x04
#define MODE1_DDR 0x24
#define MODE2_SDR 0x05
#define MODE2_DDR 0x25
#define MODE4_SDR 0x06
#define MODE4_DDR 0x26
#define MODE8_SDR 0x07
#define MODE8_DDR 0x27
#define WRITE_SDR 0x08
#define WRITE_DDR 0x28
#define READ_SDR 0x09
#define READ_DDR 0x29
#define LEARN_SDR 0x0A
#define LEARN_DDR 0x2A
#define DATSZ_SDR 0x0B
#define DATSZ_DDR 0x2B
#define DUMMY_SDR 0x0C
#define DUMMY_DDR 0x2C
#define DUMMY_RWDS_SDR 0x0D
#define DUMMY_RWDS_DDR 0x2D
#define JMP_ON_CS 0x1F
#define STOP 0
#define FLEXSPI_1PAD 0
#define FLEXSPI_2PAD 1
#define FLEXSPI_4PAD 2
#define FLEXSPI_8PAD 3
#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \
(FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \
FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1))
//!@brief Definitions for FlexSPI Serial Clock Frequency
typedef enum _FlexSpiSerialClockFreq
{
kFlexSpiSerialClk_30MHz = 1,
kFlexSpiSerialClk_50MHz = 2,
kFlexSpiSerialClk_60MHz = 3,
kFlexSpiSerialClk_75MHz = 4,
kFlexSpiSerialClk_80MHz = 5,
kFlexSpiSerialClk_100MHz = 6,
kFlexSpiSerialClk_120MHz = 7,
kFlexSpiSerialClk_133MHz = 8,
} flexspi_serial_clk_freq_t;
//!@brief FlexSPI clock configuration type
enum
{
kFlexSpiClk_SDR, //!< Clock configure for SDR mode
kFlexSpiClk_DDR, //!< Clock configurat for DDR mode
};
//!@brief FlexSPI Read Sample Clock Source definition
typedef enum _FlashReadSampleClkSource
{
kFlexSPIReadSampleClk_LoopbackInternally = 0,
kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1,
kFlexSPIReadSampleClk_LoopbackFromSckPad = 2,
kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3,
} flexspi_read_sample_clk_t;
//!@brief Misc feature bit definitions
enum
{
kFlexSpiMiscOffset_DiffClkEnable = 0, //!< Bit for Differential clock enable
kFlexSpiMiscOffset_Ck2Enable = 1, //!< Bit for CK2 enable
kFlexSpiMiscOffset_ParallelEnable = 2, //!< Bit for Parallel mode enable
kFlexSpiMiscOffset_WordAddressableEnable = 3, //!< Bit for Word Addressable enable
kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, //!< Bit for Safe Configuration Frequency enable
kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, //!< Bit for Pad setting override enable
kFlexSpiMiscOffset_DdrModeEnable = 6, //!< Bit for DDR clock confiuration indication.
};
//!@brief Flash Type Definition
enum
{
kFlexSpiDeviceType_SerialNOR = 1, //!< Flash devices are Serial NOR
kFlexSpiDeviceType_SerialNAND = 2, //!< Flash devices are Serial NAND
kFlexSpiDeviceType_SerialRAM = 3, //!< Flash devices are Serial RAM/HyperFLASH
kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND
kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, //!< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs
};
//!@brief Flash Pad Definitions
enum
{
kSerialFlash_1Pad = 1,
kSerialFlash_2Pads = 2,
kSerialFlash_4Pads = 4,
kSerialFlash_8Pads = 8,
};
//!@brief FlexSPI LUT Sequence structure
typedef struct _lut_sequence
{
uint8_t seqNum; //!< Sequence Number, valid number: 1-16
uint8_t seqId; //!< Sequence Index, valid number: 0-15
uint16_t reserved;
} flexspi_lut_seq_t;
//!@brief Flash Configuration Command Type
enum
{
kDeviceConfigCmdType_Generic, //!< Generic command, for example: configure dummy cycles, drive strength, etc
kDeviceConfigCmdType_QuadEnable, //!< Quad Enable command
kDeviceConfigCmdType_Spi2Xpi, //!< Switch from SPI to DPI/QPI/OPI mode
kDeviceConfigCmdType_Xpi2Spi, //!< Switch from DPI/QPI/OPI to SPI mode
kDeviceConfigCmdType_Spi2NoCmd, //!< Switch to 0-4-4/0-8-8 mode
kDeviceConfigCmdType_Reset, //!< Reset device command
};
//!@brief FlexSPI Memory Configuration Block
typedef struct _FlexSPIConfig
{
uint32_t tag; //!< [0x000-0x003] Tag, fixed value 0x42464346UL
uint32_t version; //!< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
uint32_t reserved0; //!< [0x008-0x00b] Reserved for future use
uint8_t readSampleClkSrc; //!< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
uint8_t csHoldTime; //!< [0x00d-0x00d] CS hold time, default value: 3
uint8_t csSetupTime; //!< [0x00e-0x00e] CS setup time, default value: 3
uint8_t columnAddressWidth; //!< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For
//! Serial NAND, need to refer to datasheet
uint8_t deviceModeCfgEnable; //!< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
uint8_t deviceModeType; //!< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch,
//! Generic configuration, etc.
uint16_t waitTimeCfgCommands; //!< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for
//! DPI/QPI/OPI switch or reset command
flexspi_lut_seq_t deviceModeSeq; //!< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt
//! sequence number, [31:16] Reserved
uint32_t deviceModeArg; //!< [0x018-0x01b] Argument/Parameter for device configuration
uint8_t configCmdEnable; //!< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
uint8_t configModeType[3]; //!< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
flexspi_lut_seq_t
configCmdSeqs[3]; //!< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
uint32_t reserved1; //!< [0x02c-0x02f] Reserved for future use
uint32_t configCmdArgs[3]; //!< [0x030-0x03b] Arguments/Parameters for device Configuration commands
uint32_t reserved2; //!< [0x03c-0x03f] Reserved for future use
uint32_t controllerMiscOption; //!< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more
//! details
uint8_t deviceType; //!< [0x044-0x044] Device Type: See Flash Type Definition for more details
uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot
//! Chapter for more details
uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot
//! be done using 1 LUT sequence, currently, only applicable to HyperFLASH
uint32_t reserved3[2]; //!< [0x048-0x04f] Reserved for future use
uint32_t sflashA1Size; //!< [0x050-0x053] Size of Flash connected to A1
uint32_t sflashA2Size; //!< [0x054-0x057] Size of Flash connected to A2
uint32_t sflashB1Size; //!< [0x058-0x05b] Size of Flash connected to B1
uint32_t sflashB2Size; //!< [0x05c-0x05f] Size of Flash connected to B2
uint32_t csPadSettingOverride; //!< [0x060-0x063] CS pad setting override value
uint32_t sclkPadSettingOverride; //!< [0x064-0x067] SCK pad setting override value
uint32_t dataPadSettingOverride; //!< [0x068-0x06b] data pad setting override value
uint32_t dqsPadSettingOverride; //!< [0x06c-0x06f] DQS pad setting override value
uint32_t timeoutInMs; //!< [0x070-0x073] Timeout threshold for read status command
uint32_t commandInterval; //!< [0x074-0x077] CS deselect interval between two commands
uint16_t dataValidTime[2]; //!< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
uint16_t busyOffset; //!< [0x07c-0x07d] Busy offset, valid value: 0-31
uint16_t busyBitPolarity; //!< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 -
//! busy flag is 0 when flash device is busy
uint32_t lookupTable[64]; //!< [0x080-0x17f] Lookup table holds Flash command sequences
flexspi_lut_seq_t lutCustomSeq[12]; //!< [0x180-0x1af] Customizable LUT Sequences
uint32_t reserved4[4]; //!< [0x1b0-0x1bf] Reserved for future use
} flexspi_mem_config_t;
/* */
#define NOR_CMD_LUT_SEQ_IDX_READ_NORMAL 0
#define NOR_CMD_LUT_SEQ_IDX_READSTATUSREG 1
#define NOR_CMD_LUT_SEQ_IDX_READ_FAST_QUAD 2
#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE 3
#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI 4
#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5
#define NOR_CMD_LUT_SEQ_IDX_WRITESTATUSREG 6
#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM_QUAD 7
#define NOR_CMD_LUT_SEQ_IDX_READID 8
#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM 9
#define NOR_CMD_LUT_SEQ_IDX_ENTERQPI 10
#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11
#define NOR_CMD_LUT_SEQ_IDX_EXITQPI 12
/*
* Serial NOR configuration block
*/
typedef struct _flexspi_nor_config
{
flexspi_mem_config_t memConfig; //!< Common memory configuration info via FlexSPI
uint32_t pageSize; //!< Page size of Serial NOR
uint32_t sectorSize; //!< Sector size of Serial NOR
uint8_t ipcmdSerialClkFreq; //!< Clock frequency for IP command
uint8_t isUniformBlockSize; //!< Sector/Block size is the same
uint8_t reserved0[2]; //!< Reserved for future use
uint8_t serialNorType; //!< Serial NOR Flash type: 0/1/2/3
uint8_t needExitNoCmdMode; //!< Need to exit NoCmd mode before other IP command
uint8_t halfClkForNonReadCmd; //!< Half the Serial Clock for non-read command: true/false
uint8_t needRestoreNoCmdMode; //!< Need to Restore NoCmd mode after IP commmand execution
uint32_t blockSize; //!< Block size
uint32_t reserve2[11]; //!< Reserved for future use
} flexspi_nor_config_t;
#define FLASH_BUSY_STATUS_POL 0
#define FLASH_BUSY_STATUS_OFFSET 0
#ifdef __cplusplus
extern "C" {
#endif
#ifdef __cplusplus
}
#endif
#endif /* __EVKMIMXRT1011_FLEXSPI_NOR_CONFIG__ */

124
ports/mimxrt/boards/MIMXRT1010_EVK/flash_config.c
View File

@ -1,124 +0,0 @@
/*
* Copyright 2019 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
// Based on tinyusb/hw/bsp/teensy_40/evkmimxrt1010_flexspi_nor_config.c
#include "evkmimxrt1010_flexspi_nor_config.h"
/* Component ID definition, used by tools. */
#ifndef FSL_COMPONENT_ID
#define FSL_COMPONENT_ID "platform.drivers.xip_board"
#endif
/*******************************************************************************
* Code
******************************************************************************/
#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1)
#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__)
__attribute__((section(".boot_hdr.conf")))
#elif defined(__ICCARM__)
#pragma location = ".boot_hdr.conf"
#endif
const flexspi_nor_config_t qspiflash_config = {
.memConfig =
{
.tag = FLEXSPI_CFG_BLK_TAG,
.version = FLEXSPI_CFG_BLK_VERSION,
.readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad,
.csHoldTime = 3u,
.csSetupTime = 3u,
.sflashPadType = kSerialFlash_4Pads,
.serialClkFreq = kFlexSpiSerialClk_100MHz,
.sflashA1Size = 16u * 1024u * 1024u,
.lookupTable =
{
// 0 Read LUTs 0 -> 0
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18),
FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 1 Read status register -> 1
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x05, READ_SDR, FLEXSPI_1PAD, 0x01),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 2 Fast read quad mode - SDR
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x6B, RADDR_SDR, FLEXSPI_1PAD, 0x18),
FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x08, READ_SDR, FLEXSPI_4PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 3 Write Enable -> 3
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x06, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 4 Read extend parameters
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x81, READ_SDR, FLEXSPI_1PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 5 Erase Sector -> 5
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x20, RADDR_SDR, FLEXSPI_1PAD, 24),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 6 Write Status Reg
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x01, WRITE_SDR, FLEXSPI_1PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 7 Page Program - quad mode (-> 9)
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x32, RADDR_SDR, FLEXSPI_1PAD, 0x18),
FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_4PAD, 0x04, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 8 Read ID
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x90, DUMMY_SDR, FLEXSPI_1PAD, 24),
FLEXSPI_LUT_SEQ(READ_SDR, FLEXSPI_1PAD, 0x00, 0, 0, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 9 Page Program - single mode -> 9
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x02, RADDR_SDR, FLEXSPI_1PAD, 24),
FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0, 0, 0, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 10 Enter QPI mode
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x35, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 11 Erase Chip
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x60, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 12 Exit QPI mode
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_4PAD, 0xF5, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
},
},
.pageSize = 256u,
.sectorSize = 4u * 1024u,
.blockSize = 256u * 1024u,
.isUniformBlockSize = false,
};
#endif /* XIP_BOOT_HEADER_ENABLE */

6
ports/mimxrt/boards/MIMXRT1010_EVK/mpconfigboard.h
View File

@ -1,14 +1,10 @@
#define MICROPY_HW_BOARD_NAME "i.MX RT1010 EVK"
#define MICROPY_HW_MCU_NAME "MIMXRT1011DAE5A"
#define BOARD_FLASH_SIZE (16 * 1024 * 1024)
// i.MX RT1010 EVK has 1 board LED
#define MICROPY_HW_LED1_PIN (pin_GPIO_11)
#define MICROPY_HW_LED_ON(pin) (mp_hal_pin_high(pin))
#define MICROPY_HW_LED_OFF(pin) (mp_hal_pin_low(pin))
#define BOARD_FLASH_CONFIG_HEADER_H "evkmimxrt1010_flexspi_nor_config.h"
#define BOARD_FLASH_OPS_HEADER_H "hal/flexspi_nor_flash.h"
#define MICROPY_HW_NUM_PIN_IRQS (2 * 32)
@ -33,7 +29,7 @@
{ IOMUXC_GPIO_AD_04_LPSPI1_SDO }, { IOMUXC_GPIO_AD_03_LPSPI1_SDI },
#define DMA_REQ_SRC_RX { 0, kDmaRequestMuxLPSPI1Rx, kDmaRequestMuxLPSPI2Rx }
#define DMA_REQ_SRC_TX { 0, kDmaRequestMuxLPSPI1Tx, kDmaRequestMuxLPSPI2Tx }
#define DMA_REQ_SRC_TX { 0, kDmaRequestMuxLPSPI1Tx, kDmaRequestMuxLPSPI2Tx }
// Define mapping hardware I2C # to logical I2C #
// SDA/SCL HW-I2C Logical I2C

9
ports/mimxrt/boards/MIMXRT1010_EVK/mpconfigboard.mk
View File

@ -3,21 +3,18 @@ MCU_VARIANT = MIMXRT1011DAE5A
MICROPY_FLOAT_IMPL = single
MICROPY_PY_MACHINE_SDCARD = 0
BOARD_FLASH_TYPE ?= qspi_nor
BOARD_FLASH_SIZE ?= 0x1000000 # 16MB
SRC_C += \
hal/flexspi_nor_flash.c \
JLINK_PATH = /media/RT1010-EVK/
JLINK_PATH ?= /media/RT1010-EVK/
JLINK_COMMANDER_SCRIPT = $(BUILD)/script.jlink
ifdef JLINK_IP
JLINK_CONNECTION_SETTINGS = -IP $(JLINK_IP)
else
JLINK_CONNECTION_SETTINGS = -USB
endif
deploy_jlink: $(BUILD)/firmware.hex
$(Q)$(TOUCH) $(JLINK_COMMANDER_SCRIPT)
$(ECHO) "ExitOnError 1" > $(JLINK_COMMANDER_SCRIPT)

124
ports/mimxrt/boards/MIMXRT1010_EVK/qspi_nor_flash_config.c Normal file
View File

@ -0,0 +1,124 @@
/*
* Copyright 2019 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
// Based on tinyusb/hw/bsp/teensy_40/evkmimxrt1010_flexspi_nor_config.c
#include BOARD_FLASH_CONFIG_HEADER_H
/* Component ID definition, used by tools. */
#ifndef FSL_COMPONENT_ID
#define FSL_COMPONENT_ID "platform.drivers.xip_board"
#endif
/*******************************************************************************
* Code
******************************************************************************/
#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1)
#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__)
__attribute__((section(".boot_hdr.conf")))
#elif defined(__ICCARM__)
#pragma location = ".boot_hdr.conf"
#endif
const flexspi_nor_config_t qspiflash_config = {
.memConfig =
{
.tag = FLEXSPI_CFG_BLK_TAG,
.version = FLEXSPI_CFG_BLK_VERSION,
.readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad,
.csHoldTime = 3u,
.csSetupTime = 3u,
.sflashPadType = kSerialFlash_4Pads,
.serialClkFreq = kFlexSpiSerialClk_100MHz,
.sflashA1Size = BOARD_FLASH_SIZE,
.lookupTable =
{
// 0 Read LUTs 0 -> 0
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18),
FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 1 Read status register -> 1
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x05, READ_SDR, FLEXSPI_1PAD, 0x01),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 2 Fast read quad mode - SDR
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x6B, RADDR_SDR, FLEXSPI_1PAD, 0x18),
FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x08, READ_SDR, FLEXSPI_4PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 3 Write Enable -> 3
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x06, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 4 Read extend parameters
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x81, READ_SDR, FLEXSPI_1PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 5 Erase Sector -> 5
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x20, RADDR_SDR, FLEXSPI_1PAD, 24),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 6 Write Status Reg
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x01, WRITE_SDR, FLEXSPI_1PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 7 Page Program - quad mode (-> 9)
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x32, RADDR_SDR, FLEXSPI_1PAD, 0x18),
FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_4PAD, 0x04, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 8 Read ID
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x90, DUMMY_SDR, FLEXSPI_1PAD, 24),
FLEXSPI_LUT_SEQ(READ_SDR, FLEXSPI_1PAD, 0x00, 0, 0, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 9 Page Program - single mode -> 9
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x02, RADDR_SDR, FLEXSPI_1PAD, 24),
FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0, 0, 0, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 10 Enter QPI mode
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x35, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 11 Erase Chip
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x60, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 12 Exit QPI mode
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_4PAD, 0xF5, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
},
},
.pageSize = 256u,
.sectorSize = 4u * 1024u,
.blockSize = 256u * 1024u,
.isUniformBlockSize = false,
};
#endif /* XIP_BOOT_HEADER_ENABLE */

21
ports/mimxrt/boards/MIMXRT1011.ld
View File

@ -1,15 +1,24 @@
/* Memory configuration */
#if BOARD_FLASH_RESERVED
reserved_size = BOARD_FLASH_RESERVED;
#endif
#if BOARD_FLASH_TYPE==qspi_nor
flash_start = 0x60000000;
#else
#error Unknown BOARD_FLASH_TYPE
#endif
flash_size = BOARD_FLASH_SIZE;
flash_end = DEFINED(reserved_size) ? ((flash_start) + (flash_size - reserved_size)) : ((flash_start) + (flash_size));
flash_config_start = 0x60000400;
flash_config_start = flash_start + 0x00000400;
flash_config_size = 0x00000C00;
ivt_start = 0x60001000;
ivt_start = flash_start + 0x00001000;
ivt_size = 0x00001000;
interrupts_start = 0x60002000;
interrupts_start = flash_start + 0x00002000;
interrupts_size = 0x00000400;
text_start = 0x60002400;
text_size = ((((text_start) + 1M) + (4k - 1)) & ~(4k - 1)) - (text_start); /* reserve 1M for code but align on 4k boundary */
vfs_start = (text_start) + (text_size);
text_start = flash_start + 0x00002400;
vfs_start = flash_start + 0x00100000;
text_size = ((vfs_start) - (text_start));
vfs_size = ((flash_end) - (vfs_start));
itcm_start = 0x00000000;
itcm_size = 0x00008000;

1
ports/mimxrt/boards/MIMXRT1020_EVK/MIMXRT1020_EVK.ld
View File

@ -1 +0,0 @@
flash_size = 8M;

258
ports/mimxrt/boards/MIMXRT1020_EVK/MIMXRT1020_EVK_flexspi_nor_config.h Normal file
View File

@ -0,0 +1,258 @@
/*
* Copyright 2019 NXP.
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
// Based on tinyusb/hw/bsp/teensy_40/evkmimxrt1020_flexspi_nor_config.h
#ifndef __EVKMIMXRT1020_FLEXSPI_NOR_CONFIG__
#define __EVKMIMXRT1020_FLEXSPI_NOR_CONFIG__
#include <stdint.h>
#include <stdbool.h>
#include "fsl_common.h"
/*! @name Driver version */
/*@{*/
/*! @brief XIP_BOARD driver version 2.0.0. */
#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0))
/*@}*/
/* FLEXSPI memory config block related defintions */
#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian
#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0
#define FLEXSPI_CFG_BLK_SIZE (512)
/* FLEXSPI Feature related definitions */
#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1
/* Lookup table related defintions */
#define CMD_INDEX_READ 0
#define CMD_INDEX_READSTATUS 1
#define CMD_INDEX_WRITEENABLE 2
#define CMD_INDEX_WRITE 4
#define CMD_LUT_SEQ_IDX_READ 0
#define CMD_LUT_SEQ_IDX_READSTATUS 1
#define CMD_LUT_SEQ_IDX_WRITEENABLE 3
#define CMD_LUT_SEQ_IDX_WRITE 9
#define CMD_SDR 0x01
#define CMD_DDR 0x21
#define RADDR_SDR 0x02
#define RADDR_DDR 0x22
#define CADDR_SDR 0x03
#define CADDR_DDR 0x23
#define MODE1_SDR 0x04
#define MODE1_DDR 0x24
#define MODE2_SDR 0x05
#define MODE2_DDR 0x25
#define MODE4_SDR 0x06
#define MODE4_DDR 0x26
#define MODE8_SDR 0x07
#define MODE8_DDR 0x27
#define WRITE_SDR 0x08
#define WRITE_DDR 0x28
#define READ_SDR 0x09
#define READ_DDR 0x29
#define LEARN_SDR 0x0A
#define LEARN_DDR 0x2A
#define DATSZ_SDR 0x0B
#define DATSZ_DDR 0x2B
#define DUMMY_SDR 0x0C
#define DUMMY_DDR 0x2C
#define DUMMY_RWDS_SDR 0x0D
#define DUMMY_RWDS_DDR 0x2D
#define JMP_ON_CS 0x1F
#define STOP 0
#define FLEXSPI_1PAD 0
#define FLEXSPI_2PAD 1
#define FLEXSPI_4PAD 2
#define FLEXSPI_8PAD 3
#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \
(FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \
FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1))
// !@brief Definitions for FlexSPI Serial Clock Frequency
typedef enum _FlexSpiSerialClockFreq
{
kFlexSpiSerialClk_30MHz = 1,
kFlexSpiSerialClk_50MHz = 2,
kFlexSpiSerialClk_60MHz = 3,
kFlexSpiSerialClk_75MHz = 4,
kFlexSpiSerialClk_80MHz = 5,
kFlexSpiSerialClk_100MHz = 6,
kFlexSpiSerialClk_133MHz = 7,
kFlexSpiSerialClk_166MHz = 8,
kFlexSpiSerialClk_200MHz = 9,
} flexspi_serial_clk_freq_t;
// !@brief FlexSPI clock configuration type
enum
{
kFlexSpiClk_SDR, // !< Clock configure for SDR mode
kFlexSpiClk_DDR, // !< Clock configurat for DDR mode
};
// !@brief FlexSPI Read Sample Clock Source definition
typedef enum _FlashReadSampleClkSource
{
kFlexSPIReadSampleClk_LoopbackInternally = 0,
kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1,
kFlexSPIReadSampleClk_LoopbackFromSckPad = 2,
kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3,
} flexspi_read_sample_clk_t;
// !@brief Misc feature bit definitions
enum
{
kFlexSpiMiscOffset_DiffClkEnable = 0, // !< Bit for Differential clock enable
kFlexSpiMiscOffset_Ck2Enable = 1, // !< Bit for CK2 enable
kFlexSpiMiscOffset_ParallelEnable = 2, // !< Bit for Parallel mode enable
kFlexSpiMiscOffset_WordAddressableEnable = 3, // !< Bit for Word Addressable enable
kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, // !< Bit for Safe Configuration Frequency enable
kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, // !< Bit for Pad setting override enable
kFlexSpiMiscOffset_DdrModeEnable = 6, // !< Bit for DDR clock confiuration indication.
};
// !@brief Flash Type Definition
enum
{
kFlexSpiDeviceType_SerialNOR = 1, // !< Flash devices are Serial NOR
kFlexSpiDeviceType_SerialNAND = 2, // !< Flash devices are Serial NAND
kFlexSpiDeviceType_SerialRAM = 3, // !< Flash devices are Serial RAM/HyperFLASH
kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, // !< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND
kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, // !< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs
};
// !@brief Flash Pad Definitions
enum
{
kSerialFlash_1Pad = 1,
kSerialFlash_2Pads = 2,
kSerialFlash_4Pads = 4,
kSerialFlash_8Pads = 8,
};
// !@brief FlexSPI LUT Sequence structure
typedef struct _lut_sequence
{
uint8_t seqNum; // !< Sequence Number, valid number: 1-16
uint8_t seqId; // !< Sequence Index, valid number: 0-15
uint16_t reserved;
} flexspi_lut_seq_t;
// !@brief Flash Configuration Command Type
enum
{
kDeviceConfigCmdType_Generic, // !< Generic command, for example: configure dummy cycles, drive strength, etc
kDeviceConfigCmdType_QuadEnable, // !< Quad Enable command
kDeviceConfigCmdType_Spi2Xpi, // !< Switch from SPI to DPI/QPI/OPI mode
kDeviceConfigCmdType_Xpi2Spi, // !< Switch from DPI/QPI/OPI to SPI mode
kDeviceConfigCmdType_Spi2NoCmd, // !< Switch to 0-4-4/0-8-8 mode
kDeviceConfigCmdType_Reset, // !< Reset device command
};
// !@brief FlexSPI Memory Configuration Block
typedef struct _FlexSPIConfig
{
uint32_t tag; // !< [0x000-0x003] Tag, fixed value 0x42464346UL
uint32_t version; // !< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
uint32_t reserved0; // !< [0x008-0x00b] Reserved for future use
uint8_t readSampleClkSrc; // !< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
uint8_t csHoldTime; // !< [0x00d-0x00d] CS hold time, default value: 3
uint8_t csSetupTime; // !< [0x00e-0x00e] CS setup time, default value: 3
uint8_t columnAddressWidth; // !< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For
// ! Serial NAND, need to refer to datasheet
uint8_t deviceModeCfgEnable; // !< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
uint8_t deviceModeType; // !< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch,
// ! Generic configuration, etc.
uint16_t waitTimeCfgCommands; // !< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for
// ! DPI/QPI/OPI switch or reset command
flexspi_lut_seq_t deviceModeSeq; // !< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt
// ! sequence number, [31:16] Reserved
uint32_t deviceModeArg; // !< [0x018-0x01b] Argument/Parameter for device configuration
uint8_t configCmdEnable; // !< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
uint8_t configModeType[3]; // !< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
flexspi_lut_seq_t
configCmdSeqs[3]; // !< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
uint32_t reserved1; // !< [0x02c-0x02f] Reserved for future use
uint32_t configCmdArgs[3]; // !< [0x030-0x03b] Arguments/Parameters for device Configuration commands
uint32_t reserved2; // !< [0x03c-0x03f] Reserved for future use
uint32_t controllerMiscOption; // !< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more
// ! details
uint8_t deviceType; // !< [0x044-0x044] Device Type: See Flash Type Definition for more details
uint8_t sflashPadType; // !< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
uint8_t serialClkFreq; // !< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot
// ! Chapter for more details
uint8_t lutCustomSeqEnable; // !< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot
// ! be done using 1 LUT sequence, currently, only applicable to HyperFLASH
uint32_t reserved3[2]; // !< [0x048-0x04f] Reserved for future use
uint32_t sflashA1Size; // !< [0x050-0x053] Size of Flash connected to A1
uint32_t sflashA2Size; // !< [0x054-0x057] Size of Flash connected to A2
uint32_t sflashB1Size; // !< [0x058-0x05b] Size of Flash connected to B1
uint32_t sflashB2Size; // !< [0x05c-0x05f] Size of Flash connected to B2
uint32_t csPadSettingOverride; // !< [0x060-0x063] CS pad setting override value
uint32_t sclkPadSettingOverride; // !< [0x064-0x067] SCK pad setting override value
uint32_t dataPadSettingOverride; // !< [0x068-0x06b] data pad setting override value
uint32_t dqsPadSettingOverride; // !< [0x06c-0x06f] DQS pad setting override value
uint32_t timeoutInMs; // !< [0x070-0x073] Timeout threshold for read status command
uint32_t commandInterval; // !< [0x074-0x077] CS deselect interval between two commands
uint16_t dataValidTime[2]; // !< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
uint16_t busyOffset; // !< [0x07c-0x07d] Busy offset, valid value: 0-31
uint16_t busyBitPolarity; // !< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 -
// ! busy flag is 0 when flash device is busy
uint32_t lookupTable[64]; // !< [0x080-0x17f] Lookup table holds Flash command sequences
flexspi_lut_seq_t lutCustomSeq[12]; // !< [0x180-0x1af] Customizable LUT Sequences
uint32_t reserved4[4]; // !< [0x1b0-0x1bf] Reserved for future use
} flexspi_mem_config_t;
/* */
#define NOR_CMD_LUT_SEQ_IDX_READ_NORMAL 0
#define NOR_CMD_LUT_SEQ_IDX_READSTATUSREG 1
#define NOR_CMD_LUT_SEQ_IDX_READ_FAST_QUAD 2
#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE 3
#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI 4
#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5
#define NOR_CMD_LUT_SEQ_IDX_WRITESTATUSREG 6
#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM_QUAD 7
#define NOR_CMD_LUT_SEQ_IDX_READID 8
#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM 9
#define NOR_CMD_LUT_SEQ_IDX_ENTERQPI 10
#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11
#define NOR_CMD_LUT_SEQ_IDX_EXITQPI 12
/*
* Serial NOR configuration block
*/
typedef struct _flexspi_nor_config
{
flexspi_mem_config_t memConfig; // !< Common memory configuration info via FlexSPI
uint32_t pageSize; // !< Page size of Serial NOR
uint32_t sectorSize; // !< Sector size of Serial NOR
uint8_t ipcmdSerialClkFreq; // !< Clock frequency for IP command
uint8_t isUniformBlockSize; // !< Sector/Block size is the same
uint8_t reserved0[2]; // !< Reserved for future use
uint8_t serialNorType; // !< Serial NOR Flash type: 0/1/2/3
uint8_t needExitNoCmdMode; // !< Need to exit NoCmd mode before other IP command
uint8_t halfClkForNonReadCmd; // !< Half the Serial Clock for non-read command: true/false
uint8_t needRestoreNoCmdMode; // !< Need to Restore NoCmd mode after IP commmand execution
uint32_t blockSize; // !< Block size
uint32_t reserve2[11]; // !< Reserved for future use
} flexspi_nor_config_t;
#define FLASH_BUSY_STATUS_POL 0
#define FLASH_BUSY_STATUS_OFFSET 0
#ifdef __cplusplus
extern "C" {
#endif
#ifdef __cplusplus
}
#endif
#endif /* __EVKMIMXRT1020_FLEXSPI_NOR_CONFIG__ */

114
ports/mimxrt/boards/MIMXRT1020_EVK/clock_config.h Normal file
View File

@ -0,0 +1,114 @@
/*
* Copyright 2018-2019 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef _CLOCK_CONFIG_H_
#define _CLOCK_CONFIG_H_
#include "fsl_common.h"
/*******************************************************************************
* Definitions
******************************************************************************/
#define BOARD_XTAL0_CLK_HZ 24000000U /*!< Board xtal0 frequency in Hz */
#define BOARD_XTAL32K_CLK_HZ 32768U /*!< Board xtal32k frequency in Hz */
/*******************************************************************************
************************ BOARD_InitBootClocks function ************************
******************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif /* __cplusplus*/
/*!
* @brief This function executes default configuration of clocks.
*
*/
void BOARD_InitBootClocks(void);
#if defined(__cplusplus)
}
#endif /* __cplusplus*/
/*******************************************************************************
********************** Configuration BOARD_BootClockRUN ***********************
******************************************************************************/
/*******************************************************************************
* Definitions for BOARD_BootClockRUN configuration
******************************************************************************/
#define BOARD_BOOTCLOCKRUN_CORE_CLOCK 500000000U /*!< Core clock frequency: 500000000Hz */
/* Clock outputs (values are in Hz): */
#define BOARD_BOOTCLOCKRUN_AHB_CLK_ROOT 500000000UL
#define BOARD_BOOTCLOCKRUN_CAN_CLK_ROOT 40000000UL
#define BOARD_BOOTCLOCKRUN_CKIL_SYNC_CLK_ROOT 32768UL
#define BOARD_BOOTCLOCKRUN_CLKO1_CLK 0UL
#define BOARD_BOOTCLOCKRUN_CLKO2_CLK 0UL
#define BOARD_BOOTCLOCKRUN_CLK_1M 1000000UL
#define BOARD_BOOTCLOCKRUN_CLK_24M 24000000UL
#define BOARD_BOOTCLOCKRUN_ENET1_TX_CLK 0UL
#define BOARD_BOOTCLOCKRUN_ENET_125M_CLK 0UL
#define BOARD_BOOTCLOCKRUN_ENET_25M_REF_CLK 0UL
#define BOARD_BOOTCLOCKRUN_ENET_500M_REF_CLK 500000000UL
#define BOARD_BOOTCLOCKRUN_FLEXIO1_CLK_ROOT 30000000UL
#define BOARD_BOOTCLOCKRUN_FLEXSPI_CLK_ROOT 132000000UL
#define BOARD_BOOTCLOCKRUN_GPT1_IPG_CLK_HIGHFREQ 62500000UL
#define BOARD_BOOTCLOCKRUN_GPT2_IPG_CLK_HIGHFREQ 62500000UL
#define BOARD_BOOTCLOCKRUN_IPG_CLK_ROOT 125000000UL
#define BOARD_BOOTCLOCKRUN_LPI2C_CLK_ROOT 60000000UL
#define BOARD_BOOTCLOCKRUN_LPSPI_CLK_ROOT 105600000UL
#define BOARD_BOOTCLOCKRUN_MQS_MCLK 63529411UL
#define BOARD_BOOTCLOCKRUN_PERCLK_CLK_ROOT 62500000UL
#define BOARD_BOOTCLOCKRUN_SAI1_CLK_ROOT 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI1_MCLK1 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI1_MCLK2 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI1_MCLK3 30000000UL
#define BOARD_BOOTCLOCKRUN_SAI2_CLK_ROOT 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI2_MCLK1 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI2_MCLK2 0UL
#define BOARD_BOOTCLOCKRUN_SAI2_MCLK3 30000000UL
#define BOARD_BOOTCLOCKRUN_SAI3_CLK_ROOT 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI3_MCLK1 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI3_MCLK2 0UL
#define BOARD_BOOTCLOCKRUN_SAI3_MCLK3 30000000UL
#define BOARD_BOOTCLOCKRUN_SEMC_CLK_ROOT 62500000UL
#define BOARD_BOOTCLOCKRUN_SPDIF0_CLK_ROOT 30000000UL
#define BOARD_BOOTCLOCKRUN_SPDIF0_EXTCLK_OUT 0UL
#define BOARD_BOOTCLOCKRUN_TRACE_CLK_ROOT 117333333UL
#define BOARD_BOOTCLOCKRUN_UART_CLK_ROOT 80000000UL
#define BOARD_BOOTCLOCKRUN_USBPHY1_CLK 0UL
#define BOARD_BOOTCLOCKRUN_USDHC1_CLK_ROOT 176000000UL
#define BOARD_BOOTCLOCKRUN_USDHC2_CLK_ROOT 176000000UL
/*! @brief Usb1 PLL set for BOARD_BootClockRUN configuration.
*/
extern const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN;
/*! @brief Sys PLL for BOARD_BootClockRUN configuration.
*/
extern const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN;
/*! @brief Enet PLL set for BOARD_BootClockRUN configuration.
*/
extern const clock_enet_pll_config_t enetPllConfig_BOARD_BootClockRUN;
/*******************************************************************************
* API for BOARD_BootClockRUN configuration
******************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif /* __cplusplus*/
/*!
* @brief This function executes configuration of clocks.
*
*/
void BOARD_BootClockRUN(void);
#if defined(__cplusplus)
}
#endif /* __cplusplus*/
#endif /* _CLOCK_CONFIG_H_ */

258
ports/mimxrt/boards/MIMXRT1020_EVK/evkmimxrt1020_flexspi_nor_config.h
View File

@ -1,258 +0,0 @@
/*
* Copyright 2019 NXP.
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
// Based on tinyusb/hw/bsp/teensy_40/evkmimxrt1020_flexspi_nor_config.h
#ifndef __EVKMIMXRT1020_FLEXSPI_NOR_CONFIG__
#define __EVKMIMXRT1020_FLEXSPI_NOR_CONFIG__
#include <stdint.h>
#include <stdbool.h>
#include "fsl_common.h"
/*! @name Driver version */
/*@{*/
/*! @brief XIP_BOARD driver version 2.0.0. */
#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0))
/*@}*/
/* FLEXSPI memory config block related defintions */
#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian
#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0
#define FLEXSPI_CFG_BLK_SIZE (512)
/* FLEXSPI Feature related definitions */
#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1
/* Lookup table related defintions */
#define CMD_INDEX_READ 0
#define CMD_INDEX_READSTATUS 1
#define CMD_INDEX_WRITEENABLE 2
#define CMD_INDEX_WRITE 4
#define CMD_LUT_SEQ_IDX_READ 0
#define CMD_LUT_SEQ_IDX_READSTATUS 1
#define CMD_LUT_SEQ_IDX_WRITEENABLE 3
#define CMD_LUT_SEQ_IDX_WRITE 9
#define CMD_SDR 0x01
#define CMD_DDR 0x21
#define RADDR_SDR 0x02
#define RADDR_DDR 0x22
#define CADDR_SDR 0x03
#define CADDR_DDR 0x23
#define MODE1_SDR 0x04
#define MODE1_DDR 0x24
#define MODE2_SDR 0x05
#define MODE2_DDR 0x25
#define MODE4_SDR 0x06
#define MODE4_DDR 0x26
#define MODE8_SDR 0x07
#define MODE8_DDR 0x27
#define WRITE_SDR 0x08
#define WRITE_DDR 0x28
#define READ_SDR 0x09
#define READ_DDR 0x29
#define LEARN_SDR 0x0A
#define LEARN_DDR 0x2A
#define DATSZ_SDR 0x0B
#define DATSZ_DDR 0x2B
#define DUMMY_SDR 0x0C
#define DUMMY_DDR 0x2C
#define DUMMY_RWDS_SDR 0x0D
#define DUMMY_RWDS_DDR 0x2D
#define JMP_ON_CS 0x1F
#define STOP 0
#define FLEXSPI_1PAD 0
#define FLEXSPI_2PAD 1
#define FLEXSPI_4PAD 2
#define FLEXSPI_8PAD 3
#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \
(FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \
FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1))
//!@brief Definitions for FlexSPI Serial Clock Frequency
typedef enum _FlexSpiSerialClockFreq
{
kFlexSpiSerialClk_30MHz = 1,
kFlexSpiSerialClk_50MHz = 2,
kFlexSpiSerialClk_60MHz = 3,
kFlexSpiSerialClk_75MHz = 4,
kFlexSpiSerialClk_80MHz = 5,
kFlexSpiSerialClk_100MHz = 6,
kFlexSpiSerialClk_133MHz = 7,
kFlexSpiSerialClk_166MHz = 8,
kFlexSpiSerialClk_200MHz = 9,
} flexspi_serial_clk_freq_t;
//!@brief FlexSPI clock configuration type
enum
{
kFlexSpiClk_SDR, //!< Clock configure for SDR mode
kFlexSpiClk_DDR, //!< Clock configurat for DDR mode
};
//!@brief FlexSPI Read Sample Clock Source definition
typedef enum _FlashReadSampleClkSource
{
kFlexSPIReadSampleClk_LoopbackInternally = 0,
kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1,
kFlexSPIReadSampleClk_LoopbackFromSckPad = 2,
kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3,
} flexspi_read_sample_clk_t;
//!@brief Misc feature bit definitions
enum
{
kFlexSpiMiscOffset_DiffClkEnable = 0, //!< Bit for Differential clock enable
kFlexSpiMiscOffset_Ck2Enable = 1, //!< Bit for CK2 enable
kFlexSpiMiscOffset_ParallelEnable = 2, //!< Bit for Parallel mode enable
kFlexSpiMiscOffset_WordAddressableEnable = 3, //!< Bit for Word Addressable enable
kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, //!< Bit for Safe Configuration Frequency enable
kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, //!< Bit for Pad setting override enable
kFlexSpiMiscOffset_DdrModeEnable = 6, //!< Bit for DDR clock confiuration indication.
};
//!@brief Flash Type Definition
enum
{
kFlexSpiDeviceType_SerialNOR = 1, //!< Flash devices are Serial NOR
kFlexSpiDeviceType_SerialNAND = 2, //!< Flash devices are Serial NAND
kFlexSpiDeviceType_SerialRAM = 3, //!< Flash devices are Serial RAM/HyperFLASH
kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND
kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, //!< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs
};
//!@brief Flash Pad Definitions
enum
{
kSerialFlash_1Pad = 1,
kSerialFlash_2Pads = 2,
kSerialFlash_4Pads = 4,
kSerialFlash_8Pads = 8,
};
//!@brief FlexSPI LUT Sequence structure
typedef struct _lut_sequence
{
uint8_t seqNum; //!< Sequence Number, valid number: 1-16
uint8_t seqId; //!< Sequence Index, valid number: 0-15
uint16_t reserved;
} flexspi_lut_seq_t;
//!@brief Flash Configuration Command Type
enum
{
kDeviceConfigCmdType_Generic, //!< Generic command, for example: configure dummy cycles, drive strength, etc
kDeviceConfigCmdType_QuadEnable, //!< Quad Enable command
kDeviceConfigCmdType_Spi2Xpi, //!< Switch from SPI to DPI/QPI/OPI mode
kDeviceConfigCmdType_Xpi2Spi, //!< Switch from DPI/QPI/OPI to SPI mode
kDeviceConfigCmdType_Spi2NoCmd, //!< Switch to 0-4-4/0-8-8 mode
kDeviceConfigCmdType_Reset, //!< Reset device command
};
//!@brief FlexSPI Memory Configuration Block
typedef struct _FlexSPIConfig
{
uint32_t tag; //!< [0x000-0x003] Tag, fixed value 0x42464346UL
uint32_t version; //!< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
uint32_t reserved0; //!< [0x008-0x00b] Reserved for future use
uint8_t readSampleClkSrc; //!< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
uint8_t csHoldTime; //!< [0x00d-0x00d] CS hold time, default value: 3
uint8_t csSetupTime; //!< [0x00e-0x00e] CS setup time, default value: 3
uint8_t columnAddressWidth; //!< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For
//! Serial NAND, need to refer to datasheet
uint8_t deviceModeCfgEnable; //!< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
uint8_t deviceModeType; //!< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch,
//! Generic configuration, etc.
uint16_t waitTimeCfgCommands; //!< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for
//! DPI/QPI/OPI switch or reset command
flexspi_lut_seq_t deviceModeSeq; //!< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt
//! sequence number, [31:16] Reserved
uint32_t deviceModeArg; //!< [0x018-0x01b] Argument/Parameter for device configuration
uint8_t configCmdEnable; //!< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
uint8_t configModeType[3]; //!< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
flexspi_lut_seq_t
configCmdSeqs[3]; //!< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
uint32_t reserved1; //!< [0x02c-0x02f] Reserved for future use
uint32_t configCmdArgs[3]; //!< [0x030-0x03b] Arguments/Parameters for device Configuration commands
uint32_t reserved2; //!< [0x03c-0x03f] Reserved for future use
uint32_t controllerMiscOption; //!< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more
//! details
uint8_t deviceType; //!< [0x044-0x044] Device Type: See Flash Type Definition for more details
uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot
//! Chapter for more details
uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot
//! be done using 1 LUT sequence, currently, only applicable to HyperFLASH
uint32_t reserved3[2]; //!< [0x048-0x04f] Reserved for future use
uint32_t sflashA1Size; //!< [0x050-0x053] Size of Flash connected to A1
uint32_t sflashA2Size; //!< [0x054-0x057] Size of Flash connected to A2
uint32_t sflashB1Size; //!< [0x058-0x05b] Size of Flash connected to B1
uint32_t sflashB2Size; //!< [0x05c-0x05f] Size of Flash connected to B2
uint32_t csPadSettingOverride; //!< [0x060-0x063] CS pad setting override value
uint32_t sclkPadSettingOverride; //!< [0x064-0x067] SCK pad setting override value
uint32_t dataPadSettingOverride; //!< [0x068-0x06b] data pad setting override value
uint32_t dqsPadSettingOverride; //!< [0x06c-0x06f] DQS pad setting override value
uint32_t timeoutInMs; //!< [0x070-0x073] Timeout threshold for read status command
uint32_t commandInterval; //!< [0x074-0x077] CS deselect interval between two commands
uint16_t dataValidTime[2]; //!< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
uint16_t busyOffset; //!< [0x07c-0x07d] Busy offset, valid value: 0-31
uint16_t busyBitPolarity; //!< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 -
//! busy flag is 0 when flash device is busy
uint32_t lookupTable[64]; //!< [0x080-0x17f] Lookup table holds Flash command sequences
flexspi_lut_seq_t lutCustomSeq[12]; //!< [0x180-0x1af] Customizable LUT Sequences
uint32_t reserved4[4]; //!< [0x1b0-0x1bf] Reserved for future use
} flexspi_mem_config_t;
/* */
#define NOR_CMD_LUT_SEQ_IDX_READ_NORMAL 0
#define NOR_CMD_LUT_SEQ_IDX_READSTATUSREG 1
#define NOR_CMD_LUT_SEQ_IDX_READ_FAST_QUAD 2
#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE 3
#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI 4
#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5
#define NOR_CMD_LUT_SEQ_IDX_WRITESTATUSREG 6
#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM_QUAD 7
#define NOR_CMD_LUT_SEQ_IDX_READID 8
#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM 9
#define NOR_CMD_LUT_SEQ_IDX_ENTERQPI 10
#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11
#define NOR_CMD_LUT_SEQ_IDX_EXITQPI 12
/*
* Serial NOR configuration block
*/
typedef struct _flexspi_nor_config
{
flexspi_mem_config_t memConfig; //!< Common memory configuration info via FlexSPI
uint32_t pageSize; //!< Page size of Serial NOR
uint32_t sectorSize; //!< Sector size of Serial NOR
uint8_t ipcmdSerialClkFreq; //!< Clock frequency for IP command
uint8_t isUniformBlockSize; //!< Sector/Block size is the same
uint8_t reserved0[2]; //!< Reserved for future use
uint8_t serialNorType; //!< Serial NOR Flash type: 0/1/2/3
uint8_t needExitNoCmdMode; //!< Need to exit NoCmd mode before other IP command
uint8_t halfClkForNonReadCmd; //!< Half the Serial Clock for non-read command: true/false
uint8_t needRestoreNoCmdMode; //!< Need to Restore NoCmd mode after IP commmand execution
uint32_t blockSize; //!< Block size
uint32_t reserve2[11]; //!< Reserved for future use
} flexspi_nor_config_t;
#define FLASH_BUSY_STATUS_POL 0
#define FLASH_BUSY_STATUS_OFFSET 0
#ifdef __cplusplus
extern "C" {
#endif
#ifdef __cplusplus
}
#endif
#endif /* __EVKMIMXRT1020_FLEXSPI_NOR_CONFIG__ */

136
ports/mimxrt/boards/MIMXRT1020_EVK/flash_config.c
View File

@ -1,136 +0,0 @@
/*
* Copyright 2019 NXP.
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
// Based on tinyusb/hw/bsp/teensy_40/evkmimxrt1010_flexspi_nor_config.c
#include "evkmimxrt1020_flexspi_nor_config.h"
/* Component ID definition, used by tools. */
#ifndef FSL_COMPONENT_ID
#define FSL_COMPONENT_ID "platform.drivers.xip_board"
#endif
/*******************************************************************************
* Code
******************************************************************************/
#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1)
#if defined(__ARMCC_VERSION) || defined(__GNUC__)
__attribute__((section(".boot_hdr.conf")))
#elif defined(__ICCARM__)
#pragma location = ".boot_hdr.conf"
#endif
const flexspi_nor_config_t qspiflash_config = {
.memConfig =
{
.tag = FLEXSPI_CFG_BLK_TAG,
.version = FLEXSPI_CFG_BLK_VERSION,
.readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad,
.csHoldTime = 3u,
.csSetupTime = 3u,
.busyOffset = FLASH_BUSY_STATUS_OFFSET, // Status bit 0 indicates busy.
.busyBitPolarity = FLASH_BUSY_STATUS_POL, // Busy when the bit is 1.
.deviceModeCfgEnable = 1u,
.deviceModeType = kDeviceConfigCmdType_QuadEnable,
.deviceModeSeq = {
.seqId = 4u,
.seqNum = 1u,
},
.deviceModeArg = 0x40,
// Enable DDR mode, Wordaddassable, Safe configuration, Differential clock
.deviceType = kFlexSpiDeviceType_SerialNOR,
.sflashPadType = kSerialFlash_4Pads,
.serialClkFreq = kFlexSpiSerialClk_30MHz,
.sflashA1Size = 8u * 1024u * 1024u,
.lookupTable =
{
// 0 Read LUTs 0 -> 0
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18),
FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 1 Read status register -> 1
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x05, READ_SDR, FLEXSPI_1PAD, 0x01),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 2 Fast read quad mode - SDR
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x6B, RADDR_SDR, FLEXSPI_1PAD, 0x18),
FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x08, READ_SDR, FLEXSPI_4PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 3 Write Enable -> 3
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x06, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 4 Read extend parameters
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x81, READ_SDR, FLEXSPI_1PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 5 Erase Sector -> 5
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x20, RADDR_SDR, FLEXSPI_1PAD, 24),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 6 Write Status Reg
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x01, WRITE_SDR, FLEXSPI_1PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 7 Page Program - quad mode (-> 9)
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x32, RADDR_SDR, FLEXSPI_1PAD, 0x18),
FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_4PAD, 0x04, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 8 Read ID
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x90, DUMMY_SDR, FLEXSPI_1PAD, 24),
FLEXSPI_LUT_SEQ(READ_SDR, FLEXSPI_1PAD, 0x00, 0, 0, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 9 Page Program - single mode -> 9
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x02, RADDR_SDR, FLEXSPI_1PAD, 24),
FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0, 0, 0, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 10 Enter QPI mode
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x35, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 11 Erase Chip
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x60, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 12 Exit QPI mode
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_4PAD, 0xF5, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
},
},
.pageSize = 256u,
.sectorSize = 4u * 1024u,
.blockSize = 256u * 1024u,
.isUniformBlockSize = false,
.ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz,
};
#endif /* XIP_BOOT_HEADER_ENABLE */

22
ports/mimxrt/boards/MIMXRT1020_EVK/mpconfigboard.h
View File

@ -1,15 +1,11 @@
#define MICROPY_HW_BOARD_NAME "i.MX RT1020 EVK"
#define MICROPY_HW_MCU_NAME "MIMXRT1021DAG5A"
#define BOARD_FLASH_SIZE (8 * 1024 * 1024)
// i.MX RT1020 EVK has 1 board LED
// Todo: think about replacing the define with searching in the generated pins?
#define MICROPY_HW_LED1_PIN (pin_GPIO_AD_B0_05)
#define MICROPY_HW_LED_ON(pin) (mp_hal_pin_low(pin))
#define MICROPY_HW_LED_OFF(pin) (mp_hal_pin_high(pin))
#define BOARD_FLASH_CONFIG_HEADER_H "evkmimxrt1020_flexspi_nor_config.h"
#define BOARD_FLASH_OPS_HEADER_H "hal/flexspi_nor_flash.h"
#define MICROPY_HW_NUM_PIN_IRQS (3 * 32)
@ -43,13 +39,13 @@
{ 0 }, { 0 }, \
{ 0 }, { 0 }, \
{ IOMUXC_GPIO_AD_B1_12_LPSPI3_SCK }, { IOMUXC_GPIO_AD_B1_13_LPSPI3_PCS0 }, \
{ IOMUXC_GPIO_AD_B1_14_LPSPI3_SDO }, { IOMUXC_GPIO_AD_B1_15_LPSPI3_SDI },
{ IOMUXC_GPIO_AD_B1_14_LPSPI3_SDO }, { IOMUXC_GPIO_AD_B1_15_LPSPI3_SDI },
#define DMA_REQ_SRC_RX { 0, kDmaRequestMuxLPSPI1Rx, kDmaRequestMuxLPSPI2Rx, \
kDmaRequestMuxLPSPI3Rx, kDmaRequestMuxLPSPI4Rx }
kDmaRequestMuxLPSPI3Rx, kDmaRequestMuxLPSPI4Rx }
#define DMA_REQ_SRC_TX { 0, kDmaRequestMuxLPSPI1Tx, kDmaRequestMuxLPSPI2Tx, \
kDmaRequestMuxLPSPI3Tx, kDmaRequestMuxLPSPI4Tx }
kDmaRequestMuxLPSPI3Tx, kDmaRequestMuxLPSPI4Tx }
// Define mapping hardware I2C # to logical I2C #
// SDA/SCL HW-I2C Logical I2C
@ -65,14 +61,14 @@
{ 0 }, { 0 }, \
{ IOMUXC_GPIO_SD_B1_02_LPI2C4_SCL }, { IOMUXC_GPIO_SD_B1_03_LPI2C4_SDA },
#define USDHC_DUMMY_PIN NULL , 0
#define USDHC_DUMMY_PIN NULL, 0
#define MICROPY_USDHC1 \
{ \
.cmd = {GPIO_SD_B0_02_USDHC1_CMD}, \
.clk = { GPIO_SD_B0_03_USDHC1_CLK }, \
.cd_b = { GPIO_SD_B0_06_USDHC1_CD_B },\
.data0 = { GPIO_SD_B0_04_USDHC1_DATA0 },\
.data1 = { GPIO_SD_B0_05_USDHC1_DATA1 },\
.data2 = { GPIO_SD_B0_00_USDHC1_DATA2 },\
.data3 = { GPIO_SD_B0_01_USDHC1_DATA3 },\
.cd_b = { GPIO_SD_B0_06_USDHC1_CD_B }, \
.data0 = { GPIO_SD_B0_04_USDHC1_DATA0 }, \
.data1 = { GPIO_SD_B0_05_USDHC1_DATA1 }, \
.data2 = { GPIO_SD_B0_00_USDHC1_DATA2 }, \
.data3 = { GPIO_SD_B0_01_USDHC1_DATA3 }, \
}

9
ports/mimxrt/boards/MIMXRT1020_EVK/mpconfigboard.mk
View File

@ -3,21 +3,20 @@ MCU_VARIANT = MIMXRT1021DAG5A
MICROPY_FLOAT_IMPL = double
MICROPY_PY_MACHINE_SDCARD = 1
BOARD_FLASH_TYPE ?= qspi_nor
BOARD_FLASH_SIZE ?= 0x800000 # 8MB
JLINK_PATH ?= /media/RT1020-EVK/
JLINK_COMMANDER_SCRIPT = $(BUILD)/script.jlink
ifdef JLINK_IP
JLINK_CONNECTION_SETTINGS = -IP $(JLINK_IP)
else
JLINK_CONNECTION_SETTINGS =
JLINK_CONNECTION_SETTINGS = -USB
endif
SRC_C += \
hal/flexspi_nor_flash.c
deploy_jlink: $(BUILD)/firmware.hex
$(Q)$(TOUCH) $(JLINK_COMMANDER_SCRIPT)
$(ECHO) "ExitOnError 1" > $(JLINK_COMMANDER_SCRIPT)
$(ECHO) "speed auto" >> $(JLINK_COMMANDER_SCRIPT)
$(ECHO) "r" >> $(JLINK_COMMANDER_SCRIPT)

136
ports/mimxrt/boards/MIMXRT1020_EVK/qspi_nor_flash_config.c Normal file
View File

@ -0,0 +1,136 @@
/*
* Copyright 2019 NXP.
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
// Based on tinyusb/hw/bsp/teensy_40/evkmimxrt1010_flexspi_nor_config.c
#include BOARD_FLASH_CONFIG_HEADER_H
/* Component ID definition, used by tools. */
#ifndef FSL_COMPONENT_ID
#define FSL_COMPONENT_ID "platform.drivers.xip_board"
#endif
/*******************************************************************************
* Code
******************************************************************************/
#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1)
#if defined(__ARMCC_VERSION) || defined(__GNUC__)
__attribute__((section(".boot_hdr.conf")))
#elif defined(__ICCARM__)
#pragma location = ".boot_hdr.conf"
#endif
const flexspi_nor_config_t qspiflash_config = {
.memConfig =
{
.tag = FLEXSPI_CFG_BLK_TAG,
.version = FLEXSPI_CFG_BLK_VERSION,
.readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad,
.csHoldTime = 3u,
.csSetupTime = 3u,
.busyOffset = FLASH_BUSY_STATUS_OFFSET, // Status bit 0 indicates busy.
.busyBitPolarity = FLASH_BUSY_STATUS_POL, // Busy when the bit is 1.
.deviceModeCfgEnable = 1u,
.deviceModeType = kDeviceConfigCmdType_QuadEnable,
.deviceModeSeq = {
.seqId = 4u,
.seqNum = 1u,
},
.deviceModeArg = 0x40,
// Enable DDR mode, Wordaddassable, Safe configuration, Differential clock
.deviceType = kFlexSpiDeviceType_SerialNOR,
.sflashPadType = kSerialFlash_4Pads,
.serialClkFreq = kFlexSpiSerialClk_100MHz,
.sflashA1Size = BOARD_FLASH_SIZE,
.lookupTable =
{
// 0 Read LUTs 0 -> 0
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18),
FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 1 Read status register -> 1
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x05, READ_SDR, FLEXSPI_1PAD, 0x01),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 2 Fast read quad mode - SDR
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x6B, RADDR_SDR, FLEXSPI_1PAD, 0x18),
FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x08, READ_SDR, FLEXSPI_4PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 3 Write Enable -> 3
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x06, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 4 Read extend parameters
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x81, READ_SDR, FLEXSPI_1PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 5 Erase Sector -> 5
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x20, RADDR_SDR, FLEXSPI_1PAD, 24),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 6 Write Status Reg
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x01, WRITE_SDR, FLEXSPI_1PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 7 Page Program - quad mode (-> 9)
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x32, RADDR_SDR, FLEXSPI_1PAD, 0x18),
FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_4PAD, 0x04, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 8 Read ID
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x90, DUMMY_SDR, FLEXSPI_1PAD, 24),
FLEXSPI_LUT_SEQ(READ_SDR, FLEXSPI_1PAD, 0x00, 0, 0, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 9 Page Program - single mode -> 9
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x02, RADDR_SDR, FLEXSPI_1PAD, 24),
FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0, 0, 0, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 10 Enter QPI mode
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x35, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 11 Erase Chip
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x60, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 12 Exit QPI mode
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_4PAD, 0xF5, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
},
},
.pageSize = 256u,
.sectorSize = 4u * 1024u,
.blockSize = 256u * 1024u,
.isUniformBlockSize = false,
// .ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz,
};
#endif /* XIP_BOOT_HEADER_ENABLE */

23
ports/mimxrt/boards/MIMXRT1021.ld
View File

@ -1,20 +1,29 @@
/* Memory configuration */
#if defined BOARD_FLASH_RESERVED
reserved_size = BOARD_FLASH_RESERVED;
#endif
#if BOARD_FLASH_TYPE == qspi_nor
flash_start = 0x60000000;
#else
#error Unknown BOARD_FLASH_TYPE
#endif
flash_size = BOARD_FLASH_SIZE;
flash_end = DEFINED(reserved_size) ? ((flash_start) + (flash_size - reserved_size)) : ((flash_start) + (flash_size));
flash_config_start = flash_start;
flash_config_size = 0x00001000;
ivt_start = 0x60001000;
ivt_start = flash_start + 0x00001000;
ivt_size = 0x00001000;
interrupts_start = 0x60002000;
interrupts_start = flash_start + 0x00002000;
interrupts_size = 0x00000400;
text_start = 0x60002400;
text_size = ((((text_start) + 1M) + (4k - 1)) & ~(4k - 1)) - (text_start); /* reserve 1M for code but align on 4k boundary */
vfs_start = (text_start) + (text_size);
text_start = flash_start + 0x00002400;
vfs_start = flash_start + 0x00100000;
text_size = ((vfs_start) - (text_start));
vfs_size = ((flash_end) - (vfs_start));
itcm_start = 0x00000000;
itcm_size = 0x00010000;
itcm_size = 0x00008000;
dtcm_start = 0x20000000;
dtcm_size = 0x00010000;
dtcm_size = 0x00018000;
ocrm_start = 0x20200000;
ocrm_size = 0x00020000;

1
ports/mimxrt/boards/MIMXRT1050_EVK/MIMXRT1050_EVK.ld
View File

@ -1 +0,0 @@
flash_size = 8M;

263
ports/mimxrt/boards/MIMXRT1050_EVK/MIMXRT1050_EVK_flexspi_nor_config.h Normal file
View File

@ -0,0 +1,263 @@
/*
* Copyright 2018 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef __EVKMIMXRT1050_FLEXSPI_NOR_CONFIG__
#define __EVKMIMXRT1050_FLEXSPI_NOR_CONFIG__
#include <stdint.h>
#include <stdbool.h>
#include "fsl_flexspi.h"
/*! @name Driver version */
/*@{*/
/*! @brief XIP_BOARD driver version 2.0.0. */
#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0))
/*@}*/
/* FLEXSPI memory config block related defintions */
#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian
#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0
#define FLEXSPI_CFG_BLK_SIZE (512)
/* FLEXSPI Feature related definitions */
#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1
/* Lookup table related defintions */
#define CMD_INDEX_READ 0
#define CMD_INDEX_READSTATUS 1
#define CMD_INDEX_WRITEENABLE 2
#define CMD_INDEX_WRITE 4
#define CMD_LUT_SEQ_IDX_READ 0
#define CMD_LUT_SEQ_IDX_READSTATUS 1
#define CMD_LUT_SEQ_IDX_WRITEENABLE 3
#define CMD_LUT_SEQ_IDX_WRITE 9
#define CMD_SDR 0x01
#define CMD_DDR 0x21
#define RADDR_SDR 0x02
#define RADDR_DDR 0x22
#define CADDR_SDR 0x03
#define CADDR_DDR 0x23
#define MODE1_SDR 0x04
#define MODE1_DDR 0x24
#define MODE2_SDR 0x05
#define MODE2_DDR 0x25
#define MODE4_SDR 0x06
#define MODE4_DDR 0x26
#define MODE8_SDR 0x07
#define MODE8_DDR 0x27
#define WRITE_SDR 0x08
#define WRITE_DDR 0x28
#define READ_SDR 0x09
#define READ_DDR 0x29
#define LEARN_SDR 0x0A
#define LEARN_DDR 0x2A
#define DATSZ_SDR 0x0B
#define DATSZ_DDR 0x2B
#define DUMMY_SDR 0x0C
#define DUMMY_DDR 0x2C
#define DUMMY_RWDS_SDR 0x0D
#define DUMMY_RWDS_DDR 0x2D
#define JMP_ON_CS 0x1F
#define STOP 0
#define FLEXSPI_1PAD 0
#define FLEXSPI_2PAD 1
#define FLEXSPI_4PAD 2
#define FLEXSPI_8PAD 3
#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \
(FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \
FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1))
// !@brief Definitions for FlexSPI Serial Clock Frequency
typedef enum _FlexSpiSerialClockFreq
{
kFlexSpiSerialClk_30MHz = 1,
kFlexSpiSerialClk_50MHz = 2,
kFlexSpiSerialClk_60MHz = 3,
kFlexSpiSerialClk_75MHz = 4,
kFlexSpiSerialClk_80MHz = 5,
kFlexSpiSerialClk_100MHz = 6,
kFlexSpiSerialClk_133MHz = 7,
kFlexSpiSerialClk_166MHz = 8,
} flexspi_serial_clk_freq_t;
// !@brief FlexSPI clock configuration type
enum
{
kFlexSpiClk_SDR, // !< Clock configure for SDR mode
kFlexSpiClk_DDR, // !< Clock configurat for DDR mode
};
// !@brief FlexSPI Read Sample Clock Source definition
typedef enum _FlashReadSampleClkSource
{
kFlexSPIReadSampleClk_LoopbackInternally = 0,
kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1,
kFlexSPIReadSampleClk_LoopbackFromSckPad = 2,
kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3,
} flexspi_read_sample_clk_t;
// !@brief Misc feature bit definitions
enum
{
kFlexSpiMiscOffset_DiffClkEnable = 0, // !< Bit for Differential clock enable
kFlexSpiMiscOffset_Ck2Enable = 1, // !< Bit for CK2 enable
kFlexSpiMiscOffset_ParallelEnable = 2, // !< Bit for Parallel mode enable
kFlexSpiMiscOffset_WordAddressableEnable = 3, // !< Bit for Word Addressable enable
kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, // !< Bit for Safe Configuration Frequency enable
kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, // !< Bit for Pad setting override enable
kFlexSpiMiscOffset_DdrModeEnable = 6, // !< Bit for DDR clock confiuration indication.
};
// !@brief Flash Type Definition
enum
{
kFlexSpiDeviceType_SerialNOR = 1, // !< Flash devices are Serial NOR
kFlexSpiDeviceType_SerialNAND = 2, // !< Flash devices are Serial NAND
kFlexSpiDeviceType_SerialRAM = 3, // !< Flash devices are Serial RAM/HyperFLASH
kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, // !< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND
kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, // !< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs
};
// !@brief Flash Pad Definitions
enum
{
kSerialFlash_1Pad = 1,
kSerialFlash_2Pads = 2,
kSerialFlash_4Pads = 4,
kSerialFlash_8Pads = 8,
};
// !@brief FlexSPI LUT Sequence structure
typedef struct _lut_sequence
{
uint8_t seqNum; // !< Sequence Number, valid number: 1-16
uint8_t seqId; // !< Sequence Index, valid number: 0-15
uint16_t reserved;
} flexspi_lut_seq_t;
// !@brief Flash Configuration Command Type
enum
{
kDeviceConfigCmdType_Generic, // !< Generic command, for example: configure dummy cycles, drive strength, etc
kDeviceConfigCmdType_QuadEnable, // !< Quad Enable command
kDeviceConfigCmdType_Spi2Xpi, // !< Switch from SPI to DPI/QPI/OPI mode
kDeviceConfigCmdType_Xpi2Spi, // !< Switch from DPI/QPI/OPI to SPI mode
kDeviceConfigCmdType_Spi2NoCmd, // !< Switch to 0-4-4/0-8-8 mode
kDeviceConfigCmdType_Reset, // !< Reset device command
};
// !@brief FlexSPI Memory Configuration Block
typedef struct _FlexSPIConfig
{
uint32_t tag; // !< [0x000-0x003] Tag, fixed value 0x42464346UL
uint32_t version; // !< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
uint32_t reserved0; // !< [0x008-0x00b] Reserved for future use
uint8_t readSampleClkSrc; // !< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
uint8_t csHoldTime; // !< [0x00d-0x00d] CS hold time, default value: 3
uint8_t csSetupTime; // !< [0x00e-0x00e] CS setup time, default value: 3
uint8_t columnAddressWidth; // !< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For
// ! Serial NAND, need to refer to datasheet
uint8_t deviceModeCfgEnable; // !< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
uint8_t deviceModeType; // !< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch,
// ! Generic configuration, etc.
uint16_t waitTimeCfgCommands; // !< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for
// ! DPI/QPI/OPI switch or reset command
flexspi_lut_seq_t deviceModeSeq; // !< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt
// ! sequence number, [31:16] Reserved
uint32_t deviceModeArg; // !< [0x018-0x01b] Argument/Parameter for device configuration
uint8_t configCmdEnable; // !< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
uint8_t configModeType[3]; // !< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
flexspi_lut_seq_t
configCmdSeqs[3]; // !< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
uint32_t reserved1; // !< [0x02c-0x02f] Reserved for future use
uint32_t configCmdArgs[3]; // !< [0x030-0x03b] Arguments/Parameters for device Configuration commands
uint32_t reserved2; // !< [0x03c-0x03f] Reserved for future use
uint32_t controllerMiscOption; // !< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more
// ! details
uint8_t deviceType; // !< [0x044-0x044] Device Type: See Flash Type Definition for more details
uint8_t sflashPadType; // !< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
uint8_t serialClkFreq; // !< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot
// ! Chapter for more details
uint8_t lutCustomSeqEnable; // !< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot
// ! be done using 1 LUT sequence, currently, only applicable to HyperFLASH
uint32_t reserved3[2]; // !< [0x048-0x04f] Reserved for future use
uint32_t sflashA1Size; // !< [0x050-0x053] Size of Flash connected to A1
uint32_t sflashA2Size; // !< [0x054-0x057] Size of Flash connected to A2
uint32_t sflashB1Size; // !< [0x058-0x05b] Size of Flash connected to B1
uint32_t sflashB2Size; // !< [0x05c-0x05f] Size of Flash connected to B2
uint32_t csPadSettingOverride; // !< [0x060-0x063] CS pad setting override value
uint32_t sclkPadSettingOverride; // !< [0x064-0x067] SCK pad setting override value
uint32_t dataPadSettingOverride; // !< [0x068-0x06b] data pad setting override value
uint32_t dqsPadSettingOverride; // !< [0x06c-0x06f] DQS pad setting override value
uint32_t timeoutInMs; // !< [0x070-0x073] Timeout threshold for read status command
uint32_t commandInterval; // !< [0x074-0x077] CS deselect interval between two commands
uint16_t dataValidTime[2]; // !< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
uint16_t busyOffset; // !< [0x07c-0x07d] Busy offset, valid value: 0-31
uint16_t busyBitPolarity; // !< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 -
// ! busy flag is 0 when flash device is busy
uint32_t lookupTable[64]; // !< [0x080-0x17f] Lookup table holds Flash command sequences
flexspi_lut_seq_t lutCustomSeq[12]; // !< [0x180-0x1af] Customizable LUT Sequences
uint32_t reserved4[4]; // !< [0x1b0-0x1bf] Reserved for future use
} flexspi_mem_config_t;
/* */
#define NOR_CMD_LUT_SEQ_IDX_READ_NORMAL 0
#define NOR_CMD_LUT_SEQ_IDX_READSTATUSREG 1
#define NOR_CMD_LUT_SEQ_IDX_READ_FAST_QUAD 2
#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE 3
#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI 4
#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5
#define NOR_CMD_LUT_SEQ_IDX_WRITESTATUSREG 6
#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM_QUAD 7
#define NOR_CMD_LUT_SEQ_IDX_READID 8
#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM 9
#define NOR_CMD_LUT_SEQ_IDX_ENTERQPI 10
#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11
#define NOR_CMD_LUT_SEQ_IDX_EXITQPI 12
#define HYPERFLASH_CMD_LUT_SEQ_IDX_READDATA 0
#define HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEDATA 1
#define HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS 2
#define HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE 4
#define HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR 6
#define HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM 10
#define HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP 12
/*
* Serial NOR configuration block
*/
typedef struct _flexspi_nor_config
{
flexspi_mem_config_t memConfig; // !< Common memory configuration info via FlexSPI
uint32_t pageSize; // !< Page size of Serial NOR
uint32_t sectorSize; // !< Sector size of Serial NOR
uint8_t ipcmdSerialClkFreq; // !< Clock frequency for IP command
uint8_t isUniformBlockSize; // !< Sector/Block size is the same
uint8_t reserved0[2]; // !< Reserved for future use
uint8_t serialNorType; // !< Serial NOR Flash type: 0/1/2/3
uint8_t needExitNoCmdMode; // !< Need to exit NoCmd mode before other IP command
uint8_t halfClkForNonReadCmd; // !< Half the Serial Clock for non-read command: true/false
uint8_t needRestoreNoCmdMode; // !< Need to Restore NoCmd mode after IP commmand execution
uint32_t blockSize; // !< Block size
uint32_t reserve2[11]; // !< Reserved for future use
} flexspi_nor_config_t;
#define FLASH_BUSY_STATUS_POL 0
#define FLASH_BUSY_STATUS_OFFSET 0
#ifdef __cplusplus
extern "C" {
#endif
#ifdef __cplusplus
}
#endif
#endif /* __EVKMIMXRT1050_FLEXSPI_NOR_CONFIG__ */

119
ports/mimxrt/boards/MIMXRT1050_EVK/clock_config.h Normal file
View File

@ -0,0 +1,119 @@
/*
* Copyright 2017-2019 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef _CLOCK_CONFIG_H_
#define _CLOCK_CONFIG_H_
#include "fsl_common.h"
/*******************************************************************************
* Definitions
******************************************************************************/
#define BOARD_XTAL0_CLK_HZ 24000000U /*!< Board xtal0 frequency in Hz */
#define BOARD_XTAL32K_CLK_HZ 32768U /*!< Board xtal32k frequency in Hz */
/*******************************************************************************
************************ BOARD_InitBootClocks function ************************
******************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif /* __cplusplus*/
/*!
* @brief This function executes default configuration of clocks.
*
*/
void BOARD_InitBootClocks(void);
#if defined(__cplusplus)
}
#endif /* __cplusplus*/
/*******************************************************************************
********************** Configuration BOARD_BootClockRUN ***********************
******************************************************************************/
/*******************************************************************************
* Definitions for BOARD_BootClockRUN configuration
******************************************************************************/
#define BOARD_BOOTCLOCKRUN_CORE_CLOCK 600000000U /*!< Core clock frequency: 600000000Hz */
/* Clock outputs (values are in Hz): */
#define BOARD_BOOTCLOCKRUN_AHB_CLK_ROOT 600000000UL
#define BOARD_BOOTCLOCKRUN_CAN_CLK_ROOT 40000000UL
#define BOARD_BOOTCLOCKRUN_CKIL_SYNC_CLK_ROOT 32768UL
#define BOARD_BOOTCLOCKRUN_CLKO1_CLK 0UL
#define BOARD_BOOTCLOCKRUN_CLKO2_CLK 0UL
#define BOARD_BOOTCLOCKRUN_CLK_1M 1000000UL
#define BOARD_BOOTCLOCKRUN_CLK_24M 24000000UL
#define BOARD_BOOTCLOCKRUN_CSI_CLK_ROOT 12000000UL
#define BOARD_BOOTCLOCKRUN_ENET1_TX_CLK 2400000UL
#define BOARD_BOOTCLOCKRUN_ENET_125M_CLK 2400000UL
#define BOARD_BOOTCLOCKRUN_ENET_25M_REF_CLK 1200000UL
#define BOARD_BOOTCLOCKRUN_FLEXIO1_CLK_ROOT 30000000UL
#define BOARD_BOOTCLOCKRUN_FLEXIO2_CLK_ROOT 30000000UL
#define BOARD_BOOTCLOCKRUN_FLEXSPI_CLK_ROOT 160000000UL
#define BOARD_BOOTCLOCKRUN_GPT1_IPG_CLK_HIGHFREQ 75000000UL
#define BOARD_BOOTCLOCKRUN_GPT2_IPG_CLK_HIGHFREQ 75000000UL
#define BOARD_BOOTCLOCKRUN_IPG_CLK_ROOT 150000000UL
#define BOARD_BOOTCLOCKRUN_LCDIF_CLK_ROOT 9642857UL
#define BOARD_BOOTCLOCKRUN_LPI2C_CLK_ROOT 60000000UL
#define BOARD_BOOTCLOCKRUN_LPSPI_CLK_ROOT 105600000UL
#define BOARD_BOOTCLOCKRUN_LVDS1_CLK 1200000000UL
#define BOARD_BOOTCLOCKRUN_MQS_MCLK 63529411UL
#define BOARD_BOOTCLOCKRUN_PERCLK_CLK_ROOT 75000000UL
#define BOARD_BOOTCLOCKRUN_PLL7_MAIN_CLK 24000000UL
#define BOARD_BOOTCLOCKRUN_SAI1_CLK_ROOT 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI1_MCLK1 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI1_MCLK2 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI1_MCLK3 30000000UL
#define BOARD_BOOTCLOCKRUN_SAI2_CLK_ROOT 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI2_MCLK1 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI2_MCLK2 0UL
#define BOARD_BOOTCLOCKRUN_SAI2_MCLK3 30000000UL
#define BOARD_BOOTCLOCKRUN_SAI3_CLK_ROOT 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI3_MCLK1 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI3_MCLK2 0UL
#define BOARD_BOOTCLOCKRUN_SAI3_MCLK3 30000000UL
#define BOARD_BOOTCLOCKRUN_SEMC_CLK_ROOT 75000000UL
#define BOARD_BOOTCLOCKRUN_SPDIF0_CLK_ROOT 30000000UL
#define BOARD_BOOTCLOCKRUN_SPDIF0_EXTCLK_OUT 0UL
#define BOARD_BOOTCLOCKRUN_TRACE_CLK_ROOT 117333333UL
#define BOARD_BOOTCLOCKRUN_UART_CLK_ROOT 80000000UL
#define BOARD_BOOTCLOCKRUN_USBPHY1_CLK 0UL
#define BOARD_BOOTCLOCKRUN_USBPHY2_CLK 0UL
#define BOARD_BOOTCLOCKRUN_USDHC1_CLK_ROOT 198000000UL
#define BOARD_BOOTCLOCKRUN_USDHC2_CLK_ROOT 198000000UL
/*! @brief Arm PLL set for BOARD_BootClockRUN configuration.
*/
extern const clock_arm_pll_config_t armPllConfig_BOARD_BootClockRUN;
/*! @brief Usb1 PLL set for BOARD_BootClockRUN configuration.
*/
extern const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN;
/*! @brief Sys PLL for BOARD_BootClockRUN configuration.
*/
extern const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN;
/*******************************************************************************
* API for BOARD_BootClockRUN configuration
******************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif /* __cplusplus*/
/*!
* @brief This function executes configuration of clocks.
*
*/
void BOARD_BootClockRUN(void);
#if defined(__cplusplus)
}
#endif /* __cplusplus*/
#endif /* _CLOCK_CONFIG_H_ */

255
ports/mimxrt/boards/MIMXRT1050_EVK/evkmimxrt1050_flexspi_nor_config.h
View File

@ -1,255 +0,0 @@
/*
* Copyright 2018 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef __EVKMIMXRT1050_FLEXSPI_NOR_CONFIG__
#define __EVKMIMXRT1050_FLEXSPI_NOR_CONFIG__
#include <stdint.h>
#include <stdbool.h>
#include "fsl_common.h"
/*! @name Driver version */
/*@{*/
/*! @brief XIP_BOARD driver version 2.0.0. */
#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0))
/*@}*/
/* FLEXSPI memory config block related defintions */
#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian
#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0
#define FLEXSPI_CFG_BLK_SIZE (512)
/* FLEXSPI Feature related definitions */
#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1
/* Lookup table related defintions */
#define CMD_INDEX_READ 0
#define CMD_INDEX_READSTATUS 1
#define CMD_INDEX_WRITEENABLE 2
#define CMD_INDEX_WRITE 4
#define CMD_LUT_SEQ_IDX_READ 0
#define CMD_LUT_SEQ_IDX_READSTATUS 1
#define CMD_LUT_SEQ_IDX_WRITEENABLE 3
#define CMD_LUT_SEQ_IDX_WRITE 9
#define CMD_SDR 0x01
#define CMD_DDR 0x21
#define RADDR_SDR 0x02
#define RADDR_DDR 0x22
#define CADDR_SDR 0x03
#define CADDR_DDR 0x23
#define MODE1_SDR 0x04
#define MODE1_DDR 0x24
#define MODE2_SDR 0x05
#define MODE2_DDR 0x25
#define MODE4_SDR 0x06
#define MODE4_DDR 0x26
#define MODE8_SDR 0x07
#define MODE8_DDR 0x27
#define WRITE_SDR 0x08
#define WRITE_DDR 0x28
#define READ_SDR 0x09
#define READ_DDR 0x29
#define LEARN_SDR 0x0A
#define LEARN_DDR 0x2A
#define DATSZ_SDR 0x0B
#define DATSZ_DDR 0x2B
#define DUMMY_SDR 0x0C
#define DUMMY_DDR 0x2C
#define DUMMY_RWDS_SDR 0x0D
#define DUMMY_RWDS_DDR 0x2D
#define JMP_ON_CS 0x1F
#define STOP 0
#define FLEXSPI_1PAD 0
#define FLEXSPI_2PAD 1
#define FLEXSPI_4PAD 2
#define FLEXSPI_8PAD 3
#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \
(FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \
FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1))
//!@brief Definitions for FlexSPI Serial Clock Frequency
typedef enum _FlexSpiSerialClockFreq
{
kFlexSpiSerialClk_30MHz = 1,
kFlexSpiSerialClk_50MHz = 2,
kFlexSpiSerialClk_60MHz = 3,
kFlexSpiSerialClk_75MHz = 4,
kFlexSpiSerialClk_80MHz = 5,
kFlexSpiSerialClk_100MHz = 6,
kFlexSpiSerialClk_133MHz = 7,
kFlexSpiSerialClk_166MHz = 8,
} flexspi_serial_clk_freq_t;
//!@brief FlexSPI clock configuration type
enum
{
kFlexSpiClk_SDR, //!< Clock configure for SDR mode
kFlexSpiClk_DDR, //!< Clock configurat for DDR mode
};
//!@brief FlexSPI Read Sample Clock Source definition
typedef enum _FlashReadSampleClkSource
{
kFlexSPIReadSampleClk_LoopbackInternally = 0,
kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1,
kFlexSPIReadSampleClk_LoopbackFromSckPad = 2,
kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3,
} flexspi_read_sample_clk_t;
//!@brief Misc feature bit definitions
enum
{
kFlexSpiMiscOffset_DiffClkEnable = 0, //!< Bit for Differential clock enable
kFlexSpiMiscOffset_Ck2Enable = 1, //!< Bit for CK2 enable
kFlexSpiMiscOffset_ParallelEnable = 2, //!< Bit for Parallel mode enable
kFlexSpiMiscOffset_WordAddressableEnable = 3, //!< Bit for Word Addressable enable
kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, //!< Bit for Safe Configuration Frequency enable
kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, //!< Bit for Pad setting override enable
kFlexSpiMiscOffset_DdrModeEnable = 6, //!< Bit for DDR clock confiuration indication.
};
//!@brief Flash Type Definition
enum
{
kFlexSpiDeviceType_SerialNOR = 1, //!< Flash devices are Serial NOR
kFlexSpiDeviceType_SerialNAND = 2, //!< Flash devices are Serial NAND
kFlexSpiDeviceType_SerialRAM = 3, //!< Flash devices are Serial RAM/HyperFLASH
kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND
kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, //!< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs
};
//!@brief Flash Pad Definitions
enum
{
kSerialFlash_1Pad = 1,
kSerialFlash_2Pads = 2,
kSerialFlash_4Pads = 4,
kSerialFlash_8Pads = 8,
};
//!@brief FlexSPI LUT Sequence structure
typedef struct _lut_sequence
{
uint8_t seqNum; //!< Sequence Number, valid number: 1-16
uint8_t seqId; //!< Sequence Index, valid number: 0-15
uint16_t reserved;
} flexspi_lut_seq_t;
//!@brief Flash Configuration Command Type
enum
{
kDeviceConfigCmdType_Generic, //!< Generic command, for example: configure dummy cycles, drive strength, etc
kDeviceConfigCmdType_QuadEnable, //!< Quad Enable command
kDeviceConfigCmdType_Spi2Xpi, //!< Switch from SPI to DPI/QPI/OPI mode
kDeviceConfigCmdType_Xpi2Spi, //!< Switch from DPI/QPI/OPI to SPI mode
kDeviceConfigCmdType_Spi2NoCmd, //!< Switch to 0-4-4/0-8-8 mode
kDeviceConfigCmdType_Reset, //!< Reset device command
};
//!@brief FlexSPI Memory Configuration Block
typedef struct _FlexSPIConfig
{
uint32_t tag; //!< [0x000-0x003] Tag, fixed value 0x42464346UL
uint32_t version; //!< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
uint32_t reserved0; //!< [0x008-0x00b] Reserved for future use
uint8_t readSampleClkSrc; //!< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
uint8_t csHoldTime; //!< [0x00d-0x00d] CS hold time, default value: 3
uint8_t csSetupTime; //!< [0x00e-0x00e] CS setup time, default value: 3
uint8_t columnAddressWidth; //!< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For
//! Serial NAND, need to refer to datasheet
uint8_t deviceModeCfgEnable; //!< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
uint8_t deviceModeType; //!< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch,
//! Generic configuration, etc.
uint16_t waitTimeCfgCommands; //!< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for
//! DPI/QPI/OPI switch or reset command
flexspi_lut_seq_t deviceModeSeq; //!< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt
//! sequence number, [31:16] Reserved
uint32_t deviceModeArg; //!< [0x018-0x01b] Argument/Parameter for device configuration
uint8_t configCmdEnable; //!< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
uint8_t configModeType[3]; //!< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
flexspi_lut_seq_t
configCmdSeqs[3]; //!< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
uint32_t reserved1; //!< [0x02c-0x02f] Reserved for future use
uint32_t configCmdArgs[3]; //!< [0x030-0x03b] Arguments/Parameters for device Configuration commands
uint32_t reserved2; //!< [0x03c-0x03f] Reserved for future use
uint32_t controllerMiscOption; //!< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more
//! details
uint8_t deviceType; //!< [0x044-0x044] Device Type: See Flash Type Definition for more details
uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot
//! Chapter for more details
uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot
//! be done using 1 LUT sequence, currently, only applicable to HyperFLASH
uint32_t reserved3[2]; //!< [0x048-0x04f] Reserved for future use
uint32_t sflashA1Size; //!< [0x050-0x053] Size of Flash connected to A1
uint32_t sflashA2Size; //!< [0x054-0x057] Size of Flash connected to A2
uint32_t sflashB1Size; //!< [0x058-0x05b] Size of Flash connected to B1
uint32_t sflashB2Size; //!< [0x05c-0x05f] Size of Flash connected to B2
uint32_t csPadSettingOverride; //!< [0x060-0x063] CS pad setting override value
uint32_t sclkPadSettingOverride; //!< [0x064-0x067] SCK pad setting override value
uint32_t dataPadSettingOverride; //!< [0x068-0x06b] data pad setting override value
uint32_t dqsPadSettingOverride; //!< [0x06c-0x06f] DQS pad setting override value
uint32_t timeoutInMs; //!< [0x070-0x073] Timeout threshold for read status command
uint32_t commandInterval; //!< [0x074-0x077] CS deselect interval between two commands
uint16_t dataValidTime[2]; //!< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
uint16_t busyOffset; //!< [0x07c-0x07d] Busy offset, valid value: 0-31
uint16_t busyBitPolarity; //!< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 -
//! busy flag is 0 when flash device is busy
uint32_t lookupTable[64]; //!< [0x080-0x17f] Lookup table holds Flash command sequences
flexspi_lut_seq_t lutCustomSeq[12]; //!< [0x180-0x1af] Customizable LUT Sequences
uint32_t reserved4[4]; //!< [0x1b0-0x1bf] Reserved for future use
} flexspi_mem_config_t;
/* */
#define NOR_CMD_LUT_SEQ_IDX_READ_NORMAL 0
#define NOR_CMD_LUT_SEQ_IDX_READSTATUSREG 1
#define NOR_CMD_LUT_SEQ_IDX_READ_FAST_QUAD 2
#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE 3
#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI 4
#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5
#define NOR_CMD_LUT_SEQ_IDX_WRITESTATUSREG 6
#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM_QUAD 7
#define NOR_CMD_LUT_SEQ_IDX_READID 8
#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM 9
#define NOR_CMD_LUT_SEQ_IDX_ENTERQPI 10
#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11
#define NOR_CMD_LUT_SEQ_IDX_EXITQPI 12
/*
* Serial NOR configuration block
*/
typedef struct _flexspi_nor_config
{
flexspi_mem_config_t memConfig; //!< Common memory configuration info via FlexSPI
uint32_t pageSize; //!< Page size of Serial NOR
uint32_t sectorSize; //!< Sector size of Serial NOR
uint8_t ipcmdSerialClkFreq; //!< Clock frequency for IP command
uint8_t isUniformBlockSize; //!< Sector/Block size is the same
uint8_t reserved0[2]; //!< Reserved for future use
uint8_t serialNorType; //!< Serial NOR Flash type: 0/1/2/3
uint8_t needExitNoCmdMode; //!< Need to exit NoCmd mode before other IP command
uint8_t halfClkForNonReadCmd; //!< Half the Serial Clock for non-read command: true/false
uint8_t needRestoreNoCmdMode; //!< Need to Restore NoCmd mode after IP commmand execution
uint32_t blockSize; //!< Block size
uint32_t reserve2[11]; //!< Reserved for future use
} flexspi_nor_config_t;
#define FLASH_BUSY_STATUS_POL 0
#define FLASH_BUSY_STATUS_OFFSET 0
#ifdef __cplusplus
extern "C" {
#endif
#ifdef __cplusplus
}
#endif
#endif /* __EVKMIMXRT1050_FLEXSPI_NOR_CONFIG__ */

129
ports/mimxrt/boards/MIMXRT1050_EVK/flash_config.c
View File

@ -1,129 +0,0 @@
/*
* Copyright 2018 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include "evkmimxrt1050_flexspi_nor_config.h"
/* Component ID definition, used by tools. */
#ifndef FSL_COMPONENT_ID
#define FSL_COMPONENT_ID "platform.drivers.xip_board"
#endif
/*******************************************************************************
* Code
******************************************************************************/
#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1)
#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__)
__attribute__((section(".boot_hdr.conf")))
#elif defined(__ICCARM__)
#pragma location = ".boot_hdr.conf"
#endif
const flexspi_nor_config_t qspiflash_config = {
.memConfig =
{
.tag = FLEXSPI_CFG_BLK_TAG,
.version = FLEXSPI_CFG_BLK_VERSION,
.readSampleClkSrc = kFlexSPIReadSampleClk_ExternalInputFromDqsPad,
.csHoldTime = 3u,
.csSetupTime = 3u,
.columnAddressWidth = 3u,
// Enable DDR mode, Wordaddassable, Safe configuration, Differential clock
.controllerMiscOption =
(1u << kFlexSpiMiscOffset_DdrModeEnable) | (1u << kFlexSpiMiscOffset_WordAddressableEnable) |
(1u << kFlexSpiMiscOffset_SafeConfigFreqEnable) | (1u << kFlexSpiMiscOffset_DiffClkEnable),
.sflashPadType = kSerialFlash_8Pads,
.serialClkFreq = kFlexSpiSerialClk_133MHz,
.sflashA1Size = 64u * 1024u * 1024u,
.dataValidTime = {16u, 16u},
.lookupTable =
{
// 0 Read LUTs 0 -> 0
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18),
FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 1 Read status register -> 1
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x05, READ_SDR, FLEXSPI_1PAD, 0x01),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 2 Fast read quad mode - SDR
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x6B, RADDR_SDR, FLEXSPI_1PAD, 0x18),
FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x08, READ_SDR, FLEXSPI_4PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 3 Write Enable -> 3
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x06, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 4 Read extend parameters
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x81, READ_SDR, FLEXSPI_1PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 5 Erase Sector -> 5
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x20, RADDR_SDR, FLEXSPI_1PAD, 24),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 6 Write Status Reg
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x01, WRITE_SDR, FLEXSPI_1PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 7 Page Program - quad mode (-> 9)
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x32, RADDR_SDR, FLEXSPI_1PAD, 0x18),
FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_4PAD, 0x04, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 8 Read ID
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x90, DUMMY_SDR, FLEXSPI_1PAD, 24),
FLEXSPI_LUT_SEQ(READ_SDR, FLEXSPI_1PAD, 0x00, 0, 0, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 9 Page Program - single mode -> 9
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x02, RADDR_SDR, FLEXSPI_1PAD, 24),
FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0, 0, 0, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 10 Enter QPI mode
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x35, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 11 Erase Chip
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x60, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 12 Exit QPI mode
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_4PAD, 0xF5, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
},
},
.pageSize = 512u,
.sectorSize = 256u * 1024u,
.blockSize = 256u * 1024u,
.isUniformBlockSize = true,
};
#endif /* XIP_BOOT_HEADER_ENABLE */

21
ports/mimxrt/boards/MIMXRT1050_EVK/mpconfigboard.h
View File

@ -1,14 +1,10 @@
#define MICROPY_HW_BOARD_NAME "i.MX RT1050 EVK"
#define MICROPY_HW_MCU_NAME "MIMXRT1052DVL6B"
#define BOARD_FLASH_SIZE (64 * 1024 * 1024)
// MIMXRT1050_EVK has 1 user LED
// MIMXRT1050_EVKB has 1 user LED
#define MICROPY_HW_LED1_PIN (pin_GPIO_AD_B0_09)
#define MICROPY_HW_LED_ON(pin) (mp_hal_pin_low(pin))
#define MICROPY_HW_LED_OFF(pin) (mp_hal_pin_high(pin))
#define BOARD_FLASH_CONFIG_HEADER_H "evkmimxrt1050_flexspi_nor_config.h"
#define BOARD_FLASH_OPS_HEADER_H "hal/flexspi_nor_flash.h"
#define MICROPY_HW_NUM_PIN_IRQS (4 * 32 + 3)
@ -38,10 +34,10 @@
{ IOMUXC_GPIO_SD_B0_02_LPSPI1_SDO }, { IOMUXC_GPIO_SD_B0_03_LPSPI1_SDI },
#define DMA_REQ_SRC_RX { 0, kDmaRequestMuxLPSPI1Rx, kDmaRequestMuxLPSPI2Rx, \
kDmaRequestMuxLPSPI3Rx, kDmaRequestMuxLPSPI4Rx }
kDmaRequestMuxLPSPI3Rx, kDmaRequestMuxLPSPI4Rx }
#define DMA_REQ_SRC_TX { 0, kDmaRequestMuxLPSPI1Tx, kDmaRequestMuxLPSPI2Tx, \
kDmaRequestMuxLPSPI3Tx, kDmaRequestMuxLPSPI4Tx }
kDmaRequestMuxLPSPI3Tx, kDmaRequestMuxLPSPI4Tx }
// Define the mapping hardware I2C # to logical I2C #
// SDA/SCL HW-I2C Logical I2C
@ -56,13 +52,14 @@
{ IOMUXC_GPIO_AD_B1_07_LPI2C3_SCL }, { IOMUXC_GPIO_AD_B1_06_LPI2C3_SDA },
#define USDHC_DUMMY_PIN NULL, 0
#define MICROPY_USDHC1 \
{ \
.cmd = {GPIO_SD_B0_00_USDHC1_CMD}, \
.clk = { GPIO_SD_B0_01_USDHC1_CLK }, \
.cd_b = { GPIO_B1_12_USDHC1_CD_B },\
.data0 = { GPIO_SD_B0_02_USDHC1_DATA0 },\
.data1 = { GPIO_SD_B0_03_USDHC1_DATA1 },\
.data2 = { GPIO_SD_B0_04_USDHC1_DATA2 },\
.data3 = { GPIO_SD_B0_05_USDHC1_DATA3 },\
.cd_b = { GPIO_B1_12_USDHC1_CD_B }, \
.data0 = { GPIO_SD_B0_02_USDHC1_DATA0 }, \
.data1 = { GPIO_SD_B0_03_USDHC1_DATA1 }, \
.data2 = { GPIO_SD_B0_04_USDHC1_DATA2 }, \
.data3 = { GPIO_SD_B0_05_USDHC1_DATA3 }, \
}

7
ports/mimxrt/boards/MIMXRT1050_EVK/mpconfigboard.mk
View File

@ -3,11 +3,10 @@ MCU_VARIANT = MIMXRT1052DVL6B
MICROPY_FLOAT_IMPL = double
MICROPY_PY_MACHINE_SDCARD = 1
BOARD_FLASH_TYPE ?= hyperflash
BOARD_FLASH_SIZE ?= 0x4000000 # 64MB
JLINK_PATH ?= /media/RT1050-EVK/
JLINK_PATH ?= /media/RT1050-EVKB/
deploy: $(BUILD)/firmware.bin
cp $< $(JLINK_PATH)
SRC_C += \
hal/flexspi_nor_flash.c

186
ports/mimxrt/boards/MIMXRT1050_EVK/qspi_hyper_flash_config.c Normal file
View File

@ -0,0 +1,186 @@
/*
* Copyright 2018 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include BOARD_FLASH_CONFIG_HEADER_H
/* Component ID definition, used by tools. */
#ifndef FSL_COMPONENT_ID
#define FSL_COMPONENT_ID "platform.drivers.xip_board"
#endif
/*******************************************************************************
* Code
******************************************************************************/
#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1)
#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__)
__attribute__((section(".boot_hdr.conf")))
#elif defined(__ICCARM__)
#pragma location = ".boot_hdr.conf"
#endif
const flexspi_nor_config_t qspiflash_config = {
.memConfig =
{
.tag = FLEXSPI_CFG_BLK_TAG,
.version = FLEXSPI_CFG_BLK_VERSION,
.readSampleClkSrc = kFlexSPIReadSampleClk_ExternalInputFromDqsPad,
.csHoldTime = 3u,
.csSetupTime = 3u,
.columnAddressWidth = 3u,
// Enable DDR mode, Wordaddressable, Safe configuration, Differential clock
.controllerMiscOption =
(1u << kFlexSpiMiscOffset_DdrModeEnable) | (1u << kFlexSpiMiscOffset_WordAddressableEnable) |
(1u << kFlexSpiMiscOffset_SafeConfigFreqEnable) | (1u << kFlexSpiMiscOffset_DiffClkEnable),
.sflashPadType = kSerialFlash_8Pads,
.serialClkFreq = kFlexSpiSerialClk_133MHz,
.sflashA1Size = BOARD_FLASH_SIZE,
.dataValidTime = {16u, 16u},
.lookupTable =
{
/* 0 Read Data */
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READDATA] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xA0, kFLEXSPI_Command_RADDR_DDR, kFLEXSPI_8PAD, 0x18),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READDATA + 1] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_CADDR_DDR, kFLEXSPI_8PAD, 0x10, kFLEXSPI_Command_READ_DDR, kFLEXSPI_8PAD, 0x04),
/* 1 Write Data */
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEDATA] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x20, kFLEXSPI_Command_RADDR_DDR, kFLEXSPI_8PAD, 0x18),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEDATA + 1] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_CADDR_DDR, kFLEXSPI_8PAD, 0x10, kFLEXSPI_Command_WRITE_DDR, kFLEXSPI_8PAD, 0x02),
/* 2 Read Status */
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS + 1] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA), // ADDR 0x555
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS + 2] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS + 3] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x70), // DATA 0x70
// +1
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS + 4] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xA0, kFLEXSPI_Command_RADDR_DDR, kFLEXSPI_8PAD, 0x18),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS + 5] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_CADDR_DDR, kFLEXSPI_8PAD, 0x10, kFLEXSPI_Command_DUMMY_RWDS_DDR, kFLEXSPI_8PAD, 0x0B),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS + 6] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_READ_DDR, kFLEXSPI_8PAD, 0x04, kFLEXSPI_Command_STOP, kFLEXSPI_1PAD, 0x0),
/* 4 Write Enable */
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x20, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE + 1] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA), // ADDR 0x555
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE + 2] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE + 3] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA), // DATA 0xAA
// +1
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE + 4] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x20, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE + 5] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x55),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE + 6] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x02),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE + 7] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x55),
/* 6 Erase Sector */
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 1] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA), // ADDR 0x555
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 2] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 3] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x80), // DATA 0x80
// +1
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 4] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 5] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 6] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 7] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA), // ADDR 0x555
// +2
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 8] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 9] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x55),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 10] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x02),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 11] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x55),
// +3
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 12] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_RADDR_DDR, kFLEXSPI_8PAD, 0x18),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 13] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_CADDR_DDR, kFLEXSPI_8PAD, 0x10, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 14] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x30, kFLEXSPI_Command_STOP, kFLEXSPI_1PAD, 0x00),
/* 10 program page with word program command sequence */
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x20, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM + 1] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA), // ADDR 0x555
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM + 2] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM + 3] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xA0), // DATA 0xA0
// +1
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM + 4] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x20, kFLEXSPI_Command_RADDR_DDR, kFLEXSPI_8PAD, 0x18),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM + 5] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_CADDR_DDR, kFLEXSPI_8PAD, 0x10, kFLEXSPI_Command_WRITE_DDR, kFLEXSPI_8PAD, 0x80),
/* 12 Erase chip */
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 1] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 2] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 3] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x80),
// +1
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 4] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 5] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 6] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 7] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA),
// +2
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 8] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 9] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x55),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 10] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x02),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 11] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x55),
// +3
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 12] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 13] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 14] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 15] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x10),
},
},
.pageSize = 512u,
.sectorSize = 256u * 1024u,
.blockSize = 256u * 1024u,
.isUniformBlockSize = true,
};
#endif /* XIP_BOOT_HEADER_ENABLE */

129
ports/mimxrt/boards/MIMXRT1050_EVK/qspi_nor_flash_config.c Normal file
View File

@ -0,0 +1,129 @@
/*
* Copyright 2018 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include BOARD_FLASH_CONFIG_HEADER_H
/* Component ID definition, used by tools. */
#ifndef FSL_COMPONENT_ID
#define FSL_COMPONENT_ID "platform.drivers.xip_board"
#endif
/*******************************************************************************
* Code
******************************************************************************/
#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1)
#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__)
__attribute__((section(".boot_hdr.conf")))
#elif defined(__ICCARM__)
#pragma location = ".boot_hdr.conf"
#endif
const flexspi_nor_config_t qspiflash_config = {
.memConfig =
{
.tag = FLEXSPI_CFG_BLK_TAG,
.version = FLEXSPI_CFG_BLK_VERSION,
.readSampleClkSrc = kFlexSPIReadSampleClk_ExternalInputFromDqsPad,
.csHoldTime = 3u,
.csSetupTime = 3u,
.columnAddressWidth = 3u,
// Enable DDR mode, Wordaddassable, Safe configuration, Differential clock
.controllerMiscOption =
(1u << kFlexSpiMiscOffset_DdrModeEnable) | (1u << kFlexSpiMiscOffset_WordAddressableEnable) |
(1u << kFlexSpiMiscOffset_SafeConfigFreqEnable) | (1u << kFlexSpiMiscOffset_DiffClkEnable),
.sflashPadType = kSerialFlash_8Pads,
.serialClkFreq = kFlexSpiSerialClk_133MHz,
.sflashA1Size = BOARD_FLASH_SIZE,
.dataValidTime = {16u, 16u},
.lookupTable =
{
// 0 Read LUTs 0 -> 0
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18),
FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 1 Read status register -> 1
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x05, READ_SDR, FLEXSPI_1PAD, 0x01),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 2 Fast read quad mode - SDR
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x6B, RADDR_SDR, FLEXSPI_1PAD, 0x18),
FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x08, READ_SDR, FLEXSPI_4PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 3 Write Enable -> 3
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x06, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 4 Read extend parameters
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x81, READ_SDR, FLEXSPI_1PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 5 Erase Sector -> 5
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x20, RADDR_SDR, FLEXSPI_1PAD, 24),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 6 Write Status Reg
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x01, WRITE_SDR, FLEXSPI_1PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 7 Page Program - quad mode (-> 9)
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x32, RADDR_SDR, FLEXSPI_1PAD, 0x18),
FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_4PAD, 0x04, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 8 Read ID
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x90, DUMMY_SDR, FLEXSPI_1PAD, 24),
FLEXSPI_LUT_SEQ(READ_SDR, FLEXSPI_1PAD, 0x00, 0, 0, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 9 Page Program - single mode -> 9
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x02, RADDR_SDR, FLEXSPI_1PAD, 24),
FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0, 0, 0, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 10 Enter QPI mode
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x35, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 11 Erase Chip
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x60, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 12 Exit QPI mode
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_4PAD, 0xF5, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
},
},
.pageSize = 512u,
.sectorSize = 256u * 1024u,
.blockSize = 256u * 1024u,
.isUniformBlockSize = true,
};
#endif /* XIP_BOOT_HEADER_ENABLE */

1
ports/mimxrt/boards/MIMXRT1050_EVKB/MIMXRT1050_EVKB.ld
View File

@ -1 +0,0 @@
flash_size = 64M;

263
ports/mimxrt/boards/MIMXRT1050_EVKB/evkbmimxrt1050_flexspi_nor_config.h
View File

@ -1,263 +0,0 @@
/*
* Copyright 2018 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef __EVKMIMXRT1050_FLEXSPI_NOR_CONFIG__
#define __EVKMIMXRT1050_FLEXSPI_NOR_CONFIG__
#include <stdint.h>
#include <stdbool.h>
#include "fsl_flexspi.h"
/*! @name Driver version */
/*@{*/
/*! @brief XIP_BOARD driver version 2.0.0. */
#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0))
/*@}*/
/* FLEXSPI memory config block related defintions */
#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian
#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0
#define FLEXSPI_CFG_BLK_SIZE (512)
/* FLEXSPI Feature related definitions */
#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1
/* Lookup table related defintions */
#define CMD_INDEX_READ 0
#define CMD_INDEX_READSTATUS 1
#define CMD_INDEX_WRITEENABLE 2
#define CMD_INDEX_WRITE 4
#define CMD_LUT_SEQ_IDX_READ 0
#define CMD_LUT_SEQ_IDX_READSTATUS 1
#define CMD_LUT_SEQ_IDX_WRITEENABLE 3
#define CMD_LUT_SEQ_IDX_WRITE 9
#define CMD_SDR 0x01
#define CMD_DDR 0x21
#define RADDR_SDR 0x02
#define RADDR_DDR 0x22
#define CADDR_SDR 0x03
#define CADDR_DDR 0x23
#define MODE1_SDR 0x04
#define MODE1_DDR 0x24
#define MODE2_SDR 0x05
#define MODE2_DDR 0x25
#define MODE4_SDR 0x06
#define MODE4_DDR 0x26
#define MODE8_SDR 0x07
#define MODE8_DDR 0x27
#define WRITE_SDR 0x08
#define WRITE_DDR 0x28
#define READ_SDR 0x09
#define READ_DDR 0x29
#define LEARN_SDR 0x0A
#define LEARN_DDR 0x2A
#define DATSZ_SDR 0x0B
#define DATSZ_DDR 0x2B
#define DUMMY_SDR 0x0C
#define DUMMY_DDR 0x2C
#define DUMMY_RWDS_SDR 0x0D
#define DUMMY_RWDS_DDR 0x2D
#define JMP_ON_CS 0x1F
#define STOP 0
#define FLEXSPI_1PAD 0
#define FLEXSPI_2PAD 1
#define FLEXSPI_4PAD 2
#define FLEXSPI_8PAD 3
#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \
(FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \
FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1))
//!@brief Definitions for FlexSPI Serial Clock Frequency
typedef enum _FlexSpiSerialClockFreq
{
kFlexSpiSerialClk_30MHz = 1,
kFlexSpiSerialClk_50MHz = 2,
kFlexSpiSerialClk_60MHz = 3,
kFlexSpiSerialClk_75MHz = 4,
kFlexSpiSerialClk_80MHz = 5,
kFlexSpiSerialClk_100MHz = 6,
kFlexSpiSerialClk_133MHz = 7,
kFlexSpiSerialClk_166MHz = 8,
} flexspi_serial_clk_freq_t;
//!@brief FlexSPI clock configuration type
enum
{
kFlexSpiClk_SDR, //!< Clock configure for SDR mode
kFlexSpiClk_DDR, //!< Clock configurat for DDR mode
};
//!@brief FlexSPI Read Sample Clock Source definition
typedef enum _FlashReadSampleClkSource
{
kFlexSPIReadSampleClk_LoopbackInternally = 0,
kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1,
kFlexSPIReadSampleClk_LoopbackFromSckPad = 2,
kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3,
} flexspi_read_sample_clk_t;
//!@brief Misc feature bit definitions
enum
{
kFlexSpiMiscOffset_DiffClkEnable = 0, //!< Bit for Differential clock enable
kFlexSpiMiscOffset_Ck2Enable = 1, //!< Bit for CK2 enable
kFlexSpiMiscOffset_ParallelEnable = 2, //!< Bit for Parallel mode enable
kFlexSpiMiscOffset_WordAddressableEnable = 3, //!< Bit for Word Addressable enable
kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, //!< Bit for Safe Configuration Frequency enable
kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, //!< Bit for Pad setting override enable
kFlexSpiMiscOffset_DdrModeEnable = 6, //!< Bit for DDR clock confiuration indication.
};
//!@brief Flash Type Definition
enum
{
kFlexSpiDeviceType_SerialNOR = 1, //!< Flash devices are Serial NOR
kFlexSpiDeviceType_SerialNAND = 2, //!< Flash devices are Serial NAND
kFlexSpiDeviceType_SerialRAM = 3, //!< Flash devices are Serial RAM/HyperFLASH
kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND
kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, //!< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs
};
//!@brief Flash Pad Definitions
enum
{
kSerialFlash_1Pad = 1,
kSerialFlash_2Pads = 2,
kSerialFlash_4Pads = 4,
kSerialFlash_8Pads = 8,
};
//!@brief FlexSPI LUT Sequence structure
typedef struct _lut_sequence
{
uint8_t seqNum; //!< Sequence Number, valid number: 1-16
uint8_t seqId; //!< Sequence Index, valid number: 0-15
uint16_t reserved;
} flexspi_lut_seq_t;
//!@brief Flash Configuration Command Type
enum
{
kDeviceConfigCmdType_Generic, //!< Generic command, for example: configure dummy cycles, drive strength, etc
kDeviceConfigCmdType_QuadEnable, //!< Quad Enable command
kDeviceConfigCmdType_Spi2Xpi, //!< Switch from SPI to DPI/QPI/OPI mode
kDeviceConfigCmdType_Xpi2Spi, //!< Switch from DPI/QPI/OPI to SPI mode
kDeviceConfigCmdType_Spi2NoCmd, //!< Switch to 0-4-4/0-8-8 mode
kDeviceConfigCmdType_Reset, //!< Reset device command
};
//!@brief FlexSPI Memory Configuration Block
typedef struct _FlexSPIConfig
{
uint32_t tag; //!< [0x000-0x003] Tag, fixed value 0x42464346UL
uint32_t version; //!< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
uint32_t reserved0; //!< [0x008-0x00b] Reserved for future use
uint8_t readSampleClkSrc; //!< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
uint8_t csHoldTime; //!< [0x00d-0x00d] CS hold time, default value: 3
uint8_t csSetupTime; //!< [0x00e-0x00e] CS setup time, default value: 3
uint8_t columnAddressWidth; //!< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For
//! Serial NAND, need to refer to datasheet
uint8_t deviceModeCfgEnable; //!< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
uint8_t deviceModeType; //!< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch,
//! Generic configuration, etc.
uint16_t waitTimeCfgCommands; //!< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for
//! DPI/QPI/OPI switch or reset command
flexspi_lut_seq_t deviceModeSeq; //!< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt
//! sequence number, [31:16] Reserved
uint32_t deviceModeArg; //!< [0x018-0x01b] Argument/Parameter for device configuration
uint8_t configCmdEnable; //!< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
uint8_t configModeType[3]; //!< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
flexspi_lut_seq_t
configCmdSeqs[3]; //!< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
uint32_t reserved1; //!< [0x02c-0x02f] Reserved for future use
uint32_t configCmdArgs[3]; //!< [0x030-0x03b] Arguments/Parameters for device Configuration commands
uint32_t reserved2; //!< [0x03c-0x03f] Reserved for future use
uint32_t controllerMiscOption; //!< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more
//! details
uint8_t deviceType; //!< [0x044-0x044] Device Type: See Flash Type Definition for more details
uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot
//! Chapter for more details
uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot
//! be done using 1 LUT sequence, currently, only applicable to HyperFLASH
uint32_t reserved3[2]; //!< [0x048-0x04f] Reserved for future use
uint32_t sflashA1Size; //!< [0x050-0x053] Size of Flash connected to A1
uint32_t sflashA2Size; //!< [0x054-0x057] Size of Flash connected to A2
uint32_t sflashB1Size; //!< [0x058-0x05b] Size of Flash connected to B1
uint32_t sflashB2Size; //!< [0x05c-0x05f] Size of Flash connected to B2
uint32_t csPadSettingOverride; //!< [0x060-0x063] CS pad setting override value
uint32_t sclkPadSettingOverride; //!< [0x064-0x067] SCK pad setting override value
uint32_t dataPadSettingOverride; //!< [0x068-0x06b] data pad setting override value
uint32_t dqsPadSettingOverride; //!< [0x06c-0x06f] DQS pad setting override value
uint32_t timeoutInMs; //!< [0x070-0x073] Timeout threshold for read status command
uint32_t commandInterval; //!< [0x074-0x077] CS deselect interval between two commands
uint16_t dataValidTime[2]; //!< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
uint16_t busyOffset; //!< [0x07c-0x07d] Busy offset, valid value: 0-31
uint16_t busyBitPolarity; //!< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 -
//! busy flag is 0 when flash device is busy
uint32_t lookupTable[64]; //!< [0x080-0x17f] Lookup table holds Flash command sequences
flexspi_lut_seq_t lutCustomSeq[12]; //!< [0x180-0x1af] Customizable LUT Sequences
uint32_t reserved4[4]; //!< [0x1b0-0x1bf] Reserved for future use
} flexspi_mem_config_t;
/* */
#define NOR_CMD_LUT_SEQ_IDX_READ_NORMAL 0
#define NOR_CMD_LUT_SEQ_IDX_READSTATUSREG 1
#define NOR_CMD_LUT_SEQ_IDX_READ_FAST_QUAD 2
#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE 3
#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI 4
#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5
#define NOR_CMD_LUT_SEQ_IDX_WRITESTATUSREG 6
#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM_QUAD 7
#define NOR_CMD_LUT_SEQ_IDX_READID 8
#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM 9
#define NOR_CMD_LUT_SEQ_IDX_ENTERQPI 10
#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11
#define NOR_CMD_LUT_SEQ_IDX_EXITQPI 12
#define HYPERFLASH_CMD_LUT_SEQ_IDX_READDATA 0
#define HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEDATA 1
#define HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS 2
#define HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE 4
#define HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR 6
#define HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM 10
#define HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP 12
/*
* Serial NOR configuration block
*/
typedef struct _flexspi_nor_config
{
flexspi_mem_config_t memConfig; //!< Common memory configuration info via FlexSPI
uint32_t pageSize; //!< Page size of Serial NOR
uint32_t sectorSize; //!< Sector size of Serial NOR
uint8_t ipcmdSerialClkFreq; //!< Clock frequency for IP command
uint8_t isUniformBlockSize; //!< Sector/Block size is the same
uint8_t reserved0[2]; //!< Reserved for future use
uint8_t serialNorType; //!< Serial NOR Flash type: 0/1/2/3
uint8_t needExitNoCmdMode; //!< Need to exit NoCmd mode before other IP command
uint8_t halfClkForNonReadCmd; //!< Half the Serial Clock for non-read command: true/false
uint8_t needRestoreNoCmdMode; //!< Need to Restore NoCmd mode after IP commmand execution
uint32_t blockSize; //!< Block size
uint32_t reserve2[11]; //!< Reserved for future use
} flexspi_nor_config_t;
#define FLASH_BUSY_STATUS_POL 0
#define FLASH_BUSY_STATUS_OFFSET 0
#ifdef __cplusplus
extern "C" {
#endif
#ifdef __cplusplus
}
#endif
#endif /* __EVKMIMXRT1050_FLEXSPI_NOR_CONFIG__ */

186
ports/mimxrt/boards/MIMXRT1050_EVKB/flash_config.c
View File

@ -1,186 +0,0 @@
/*
* Copyright 2018 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include "evkbmimxrt1050_flexspi_nor_config.h"
/* Component ID definition, used by tools. */
#ifndef FSL_COMPONENT_ID
#define FSL_COMPONENT_ID "platform.drivers.xip_board"
#endif
/*******************************************************************************
* Code
******************************************************************************/
#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1)
#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__)
__attribute__((section(".boot_hdr.conf")))
#elif defined(__ICCARM__)
#pragma location = ".boot_hdr.conf"
#endif
const flexspi_nor_config_t qspiflash_config = {
.memConfig =
{
.tag = FLEXSPI_CFG_BLK_TAG,
.version = FLEXSPI_CFG_BLK_VERSION,
.readSampleClkSrc = kFlexSPIReadSampleClk_ExternalInputFromDqsPad,
.csHoldTime = 3u,
.csSetupTime = 3u,
.columnAddressWidth = 3u,
// Enable DDR mode, Wordaddressable, Safe configuration, Differential clock
.controllerMiscOption =
(1u << kFlexSpiMiscOffset_DdrModeEnable) | (1u << kFlexSpiMiscOffset_WordAddressableEnable) |
(1u << kFlexSpiMiscOffset_SafeConfigFreqEnable) | (1u << kFlexSpiMiscOffset_DiffClkEnable),
.sflashPadType = kSerialFlash_8Pads,
.serialClkFreq = kFlexSpiSerialClk_133MHz,
.sflashA1Size = 64u * 1024u * 1024u,
.dataValidTime = {16u, 16u},
.lookupTable =
{
/* 0 Read Data */
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READDATA] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xA0, kFLEXSPI_Command_RADDR_DDR, kFLEXSPI_8PAD, 0x18),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READDATA + 1] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_CADDR_DDR, kFLEXSPI_8PAD, 0x10, kFLEXSPI_Command_READ_DDR, kFLEXSPI_8PAD, 0x04),
/* 1 Write Data */
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEDATA] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x20, kFLEXSPI_Command_RADDR_DDR, kFLEXSPI_8PAD, 0x18),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEDATA + 1] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_CADDR_DDR, kFLEXSPI_8PAD, 0x10, kFLEXSPI_Command_WRITE_DDR, kFLEXSPI_8PAD, 0x02),
/* 2 Read Status */
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS + 1] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA), // ADDR 0x555
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS + 2] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS + 3] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x70), // DATA 0x70
// +1
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS + 4] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xA0, kFLEXSPI_Command_RADDR_DDR, kFLEXSPI_8PAD, 0x18),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS + 5] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_CADDR_DDR, kFLEXSPI_8PAD, 0x10, kFLEXSPI_Command_DUMMY_RWDS_DDR, kFLEXSPI_8PAD, 0x0B),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS + 6] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_READ_DDR, kFLEXSPI_8PAD, 0x04, kFLEXSPI_Command_STOP, kFLEXSPI_1PAD, 0x0),
/* 4 Write Enable */
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x20, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE + 1] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA), // ADDR 0x555
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE + 2] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE + 3] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA), // DATA 0xAA
// +1
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE + 4] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x20, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE + 5] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x55),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE + 6] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x02),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE + 7] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x55),
/* 6 Erase Sector */
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 1] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA), // ADDR 0x555
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 2] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 3] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x80), // DATA 0x80
// +1
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 4] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 5] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 6] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 7] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA), // ADDR 0x555
// +2
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 8] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 9] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x55),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 10] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x02),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 11] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x55),
// +3
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 12] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_RADDR_DDR, kFLEXSPI_8PAD, 0x18),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 13] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_CADDR_DDR, kFLEXSPI_8PAD, 0x10, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 14] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x30, kFLEXSPI_Command_STOP, kFLEXSPI_1PAD, 0x00),
/* 10 program page with word program command sequence */
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x20, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM + 1] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA), // ADDR 0x555
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM + 2] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM + 3] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xA0), // DATA 0xA0
// +1
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM + 4] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x20, kFLEXSPI_Command_RADDR_DDR, kFLEXSPI_8PAD, 0x18),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM + 5] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_CADDR_DDR, kFLEXSPI_8PAD, 0x10, kFLEXSPI_Command_WRITE_DDR, kFLEXSPI_8PAD, 0x80),
/* 12 Erase chip */
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 1] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 2] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 3] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x80),
// +1
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 4] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 5] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 6] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 7] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA),
// +2
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 8] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 9] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x55),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 10] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x02),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 11] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x55),
// +3
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 12] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 13] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 14] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 15] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x10),
},
},
.pageSize = 512u,
.sectorSize = 256u * 1024u,
.blockSize = 256u * 1024u,
.isUniformBlockSize = true,
};
#endif /* XIP_BOOT_HEADER_ENABLE */

68
ports/mimxrt/boards/MIMXRT1050_EVKB/mpconfigboard.h
View File

@ -1,68 +0,0 @@
#define MICROPY_HW_BOARD_NAME "i.MX RT1050 EVKB"
#define MICROPY_HW_MCU_NAME "MIMXRT1052DVL6B"
#define BOARD_FLASH_SIZE (64 * 1024 * 1024)
// MIMXRT1050_EVKB has 1 user LED
#define MICROPY_HW_LED1_PIN (pin_GPIO_AD_B0_09)
#define MICROPY_HW_LED_ON(pin) (mp_hal_pin_low(pin))
#define MICROPY_HW_LED_OFF(pin) (mp_hal_pin_high(pin))
#define BOARD_FLASH_CONFIG_HEADER_H "evkbmimxrt1050_flexspi_nor_config.h"
#define BOARD_FLASH_OPS_HEADER_H "hal/flexspi_hyper_flash.h"
#define MICROPY_HW_NUM_PIN_IRQS (4 * 32 + 3)
// Define mapping logical UART # to hardware UART #
// LPUART3 on D0/D1 -> 1
// LPUART2 on D7/D6 -> 2
// LPUART6 on D8/D9 -> 3
// LPUART8 on A1/A0 -> 4
#define MICROPY_HW_UART_NUM (sizeof(uart_index_table) / sizeof(uart_index_table)[0])
#define MICROPY_HW_UART_INDEX { 0, 3, 2, 6, 8 }
#define IOMUX_TABLE_UART \
{ 0 }, { 0 }, \
{ IOMUXC_GPIO_AD_B1_02_LPUART2_TX }, { IOMUXC_GPIO_AD_B1_03_LPUART2_RX }, \
{ IOMUXC_GPIO_AD_B1_06_LPUART3_TX }, { IOMUXC_GPIO_AD_B1_07_LPUART3_RX }, \
{ 0 }, { 0 }, \
{ 0 }, { 0 }, \
{ IOMUXC_GPIO_AD_B0_02_LPUART6_TX }, { IOMUXC_GPIO_AD_B0_03_LPUART6_RX }, \
{ 0 }, { 0 }, \
{ IOMUXC_GPIO_AD_B1_10_LPUART8_TX }, { IOMUXC_GPIO_AD_B1_11_LPUART8_RX },
#define MICROPY_HW_SPI_INDEX { 1 }
#define IOMUX_TABLE_SPI \
{ IOMUXC_GPIO_SD_B0_00_LPSPI1_SCK }, { IOMUXC_GPIO_SD_B0_01_LPSPI1_PCS0 }, \
{ IOMUXC_GPIO_SD_B0_02_LPSPI1_SDO }, { IOMUXC_GPIO_SD_B0_03_LPSPI1_SDI },
#define DMA_REQ_SRC_RX { 0, kDmaRequestMuxLPSPI1Rx, kDmaRequestMuxLPSPI2Rx, \
kDmaRequestMuxLPSPI3Rx, kDmaRequestMuxLPSPI4Rx }
#define DMA_REQ_SRC_TX { 0, kDmaRequestMuxLPSPI1Tx, kDmaRequestMuxLPSPI2Tx, \
kDmaRequestMuxLPSPI3Tx, kDmaRequestMuxLPSPI4Tx }
// Define the mapping hardware I2C # to logical I2C #
// SDA/SCL HW-I2C Logical I2C
// D14/D15 LPI2C1 -> 0
// D1/D0 LPI2C3 -> 1
#define MICROPY_HW_I2C_INDEX { 1, 3 }
#define IOMUX_TABLE_I2C \
{ IOMUXC_GPIO_AD_B1_00_LPI2C1_SCL }, { IOMUXC_GPIO_AD_B1_01_LPI2C1_SDA }, \
{ 0 }, { 0 }, \
{ IOMUXC_GPIO_AD_B1_07_LPI2C3_SCL }, { IOMUXC_GPIO_AD_B1_06_LPI2C3_SDA },
#define USDHC_DUMMY_PIN NULL , 0
#define MICROPY_USDHC1 \
{ \
.cmd = {GPIO_SD_B0_00_USDHC1_CMD}, \
.clk = { GPIO_SD_B0_01_USDHC1_CLK }, \
.cd_b = { GPIO_B1_12_USDHC1_CD_B },\
.data0 = { GPIO_SD_B0_02_USDHC1_DATA0 },\
.data1 = { GPIO_SD_B0_03_USDHC1_DATA1 },\
.data2 = { GPIO_SD_B0_04_USDHC1_DATA2 },\
.data3 = { GPIO_SD_B0_05_USDHC1_DATA3 },\
}

13
ports/mimxrt/boards/MIMXRT1050_EVKB/mpconfigboard.mk
View File

@ -1,13 +0,0 @@
MCU_SERIES = MIMXRT1052
MCU_VARIANT = MIMXRT1052DVL6B
MICROPY_FLOAT_IMPL = double
MICROPY_PY_MACHINE_SDCARD = 1
JLINK_PATH ?= /media/RT1050-EVKB/
SRC_C += \
hal/flexspi_hyper_flash.c
deploy: $(BUILD)/firmware.bin
cp $< $(JLINK_PATH)

31
ports/mimxrt/boards/MIMXRT1050_EVKB/pins.csv
View File

@ -1,31 +0,0 @@
D0,GPIO_AD_B1_07
D1,GPIO_AD_B1_06
D2,GPIO_AD_B0_11
D3,GPIO_AD_B1_08
D4,GPIO_AD_B0_09
D5,GPIO_AD_B0_10
D6,GPIO_AD_B1_02
D7,GPIO_AD_B1_03
D8,GPIO_AD_B0_03
D9,GPIO_AD_B0_02
D10,GPIO_SD_B0_01
D11,GPIO_SD_B0_02
D12,GPIO_SD_B0_03
D13,GPIO_SD_B0_00
D14,GPIO_AD_B1_01
D15,GPIO_AD_B1_00
A0,GPIO_AD_B1_10
A1,GPIO_AD_B1_11
A2,GPIO_AD_B1_04
A3,GPIO_AD_B1_05
A4,GPIO_AD_B1_01
A5,GPIO_AD_B1_00
RX,GPIO_AD_B1_07
TX,GPIO_AD_B1_06
SCL,GPIO_AD_B1_00
SDA,GPIO_AD_B1_01
SCK,GPIO_SD_B0_00
SDI,GPIO_SD_B0_03
SDO,GPIO_SD_B0_02
CS,GPIO_SD_B0_01
LED_GREEN,GPIO_AD_B0_09
1 D0 GPIO_AD_B1_07
2 D1 GPIO_AD_B1_06
3 D2 GPIO_AD_B0_11
4 D3 GPIO_AD_B1_08
5 D4 GPIO_AD_B0_09
6 D5 GPIO_AD_B0_10
7 D6 GPIO_AD_B1_02
8 D7 GPIO_AD_B1_03
9 D8 GPIO_AD_B0_03
10 D9 GPIO_AD_B0_02
11 D10 GPIO_SD_B0_01
12 D11 GPIO_SD_B0_02
13 D12 GPIO_SD_B0_03
14 D13 GPIO_SD_B0_00
15 D14 GPIO_AD_B1_01
16 D15 GPIO_AD_B1_00
17 A0 GPIO_AD_B1_10
18 A1 GPIO_AD_B1_11
19 A2 GPIO_AD_B1_04
20 A3 GPIO_AD_B1_05
21 A4 GPIO_AD_B1_01
22 A5 GPIO_AD_B1_00
23 RX GPIO_AD_B1_07
24 TX GPIO_AD_B1_06
25 SCL GPIO_AD_B1_00
26 SDA GPIO_AD_B1_01
27 SCK GPIO_SD_B0_00
28 SDI GPIO_SD_B0_03
29 SDO GPIO_SD_B0_02
30 CS GPIO_SD_B0_01
31 LED_GREEN GPIO_AD_B0_09

19
ports/mimxrt/boards/MIMXRT1052.ld
View File

@ -1,14 +1,25 @@
/* Memory configuration */
#if BOARD_FLASH_RESERVED
reserved_size = BOARD_FLASH_RESERVED;
#endif
#if BOARD_FLASH_TYPE==qspi_nor
flash_start = 0x60000000;
#elif BOARD_FLASH_TYPE==hyperflash
flash_start = 0x60000000;
#else
#error Unknown BOARD_FLASH_TYPE
#endif
flash_size = BOARD_FLASH_SIZE;
flash_end = DEFINED(reserved_size) ? ((flash_start) + (flash_size - reserved_size)) : ((flash_start) + (flash_size));
flash_config_start = flash_start;
flash_config_size = 0x00001000;
ivt_start = 0x60001000;
ivt_start = flash_start + 0x00001000;
ivt_size = 0x00001000;
interrupts_start = 0x60002000;
interrupts_start = flash_start + 0x00002000;
interrupts_size = 0x00000400;
text_start = 0x60002400;
vfs_start = 0x60100000;
text_start = flash_start + 0x00002400;
vfs_start = flash_start + 0x00100000;
text_size = ((vfs_start) - (text_start));
vfs_size = ((flash_end) - (vfs_start));
itcm_start = 0x00000000;

1
ports/mimxrt/boards/MIMXRT1060_EVK/MIMXRT1060_EVK.ld
View File

@ -1 +0,0 @@
flash_size = 64M;

264
ports/mimxrt/boards/MIMXRT1060_EVK/MIMXRT1060_EVK_flexspi_nor_config.h Normal file
View File

@ -0,0 +1,264 @@
/*
* Copyright 2018 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef __EVKMIMXRT1060_FLEXSPI_NOR_CONFIG__
#define __EVKMIMXRT1060_FLEXSPI_NOR_CONFIG__
#include <stdint.h>
#include <stdbool.h>
#include "fsl_flexspi.h"
/*! @name Driver version */
/*@{*/
/*! @brief XIP_BOARD driver version 2.0.0. */
#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0))
/*@}*/
/* FLEXSPI memory config block related defintions */
#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian
#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0
#define FLEXSPI_CFG_BLK_SIZE (512)
/* FLEXSPI Feature related definitions */
#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1
/* Lookup table related defintions */
#define CMD_INDEX_READ 0
#define CMD_INDEX_READSTATUS 1
#define CMD_INDEX_WRITEENABLE 2
#define CMD_INDEX_WRITE 4
#define CMD_LUT_SEQ_IDX_READ 0
#define CMD_LUT_SEQ_IDX_READSTATUS 1
#define CMD_LUT_SEQ_IDX_WRITEENABLE 3
#define CMD_LUT_SEQ_IDX_WRITE 9
#define CMD_SDR 0x01
#define CMD_DDR 0x21
#define RADDR_SDR 0x02
#define RADDR_DDR 0x22
#define CADDR_SDR 0x03
#define CADDR_DDR 0x23
#define MODE1_SDR 0x04
#define MODE1_DDR 0x24
#define MODE2_SDR 0x05
#define MODE2_DDR 0x25
#define MODE4_SDR 0x06
#define MODE4_DDR 0x26
#define MODE8_SDR 0x07
#define MODE8_DDR 0x27
#define WRITE_SDR 0x08
#define WRITE_DDR 0x28
#define READ_SDR 0x09
#define READ_DDR 0x29
#define LEARN_SDR 0x0A
#define LEARN_DDR 0x2A
#define DATSZ_SDR 0x0B
#define DATSZ_DDR 0x2B
#define DUMMY_SDR 0x0C
#define DUMMY_DDR 0x2C
#define DUMMY_RWDS_SDR 0x0D
#define DUMMY_RWDS_DDR 0x2D
#define JMP_ON_CS 0x1F
#define STOP 0
#define FLEXSPI_1PAD 0
#define FLEXSPI_2PAD 1
#define FLEXSPI_4PAD 2
#define FLEXSPI_8PAD 3
#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \
(FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \
FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1))
// !@brief Definitions for FlexSPI Serial Clock Frequency
typedef enum _FlexSpiSerialClockFreq
{
kFlexSpiSerialClk_30MHz = 1,
kFlexSpiSerialClk_50MHz = 2,
kFlexSpiSerialClk_60MHz = 3,
kFlexSpiSerialClk_75MHz = 4,
kFlexSpiSerialClk_80MHz = 5,
kFlexSpiSerialClk_100MHz = 6,
kFlexSpiSerialClk_120MHz = 7,
kFlexSpiSerialClk_133MHz = 8,
kFlexSpiSerialClk_166MHz = 9,
} flexspi_serial_clk_freq_t;
// !@brief FlexSPI clock configuration type
enum
{
kFlexSpiClk_SDR, // !< Clock configure for SDR mode
kFlexSpiClk_DDR, // !< Clock configurat for DDR mode
};
// !@brief FlexSPI Read Sample Clock Source definition
typedef enum _FlashReadSampleClkSource
{
kFlexSPIReadSampleClk_LoopbackInternally = 0,
kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1,
kFlexSPIReadSampleClk_LoopbackFromSckPad = 2,
kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3,
} flexspi_read_sample_clk_t;
// !@brief Misc feature bit definitions
enum
{
kFlexSpiMiscOffset_DiffClkEnable = 0, // !< Bit for Differential clock enable
kFlexSpiMiscOffset_Ck2Enable = 1, // !< Bit for CK2 enable
kFlexSpiMiscOffset_ParallelEnable = 2, // !< Bit for Parallel mode enable
kFlexSpiMiscOffset_WordAddressableEnable = 3, // !< Bit for Word Addressable enable
kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, // !< Bit for Safe Configuration Frequency enable
kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, // !< Bit for Pad setting override enable
kFlexSpiMiscOffset_DdrModeEnable = 6, // !< Bit for DDR clock confiuration indication.
};
// !@brief Flash Type Definition
enum
{
kFlexSpiDeviceType_SerialNOR = 1, // !< Flash devices are Serial NOR
kFlexSpiDeviceType_SerialNAND = 2, // !< Flash devices are Serial NAND
kFlexSpiDeviceType_SerialRAM = 3, // !< Flash devices are Serial RAM/HyperFLASH
kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, // !< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND
kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, // !< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs
};
// !@brief Flash Pad Definitions
enum
{
kSerialFlash_1Pad = 1,
kSerialFlash_2Pads = 2,
kSerialFlash_4Pads = 4,
kSerialFlash_8Pads = 8,
};
// !@brief FlexSPI LUT Sequence structure
typedef struct _lut_sequence
{
uint8_t seqNum; // !< Sequence Number, valid number: 1-16
uint8_t seqId; // !< Sequence Index, valid number: 0-15
uint16_t reserved;
} flexspi_lut_seq_t;
// !@brief Flash Configuration Command Type
enum
{
kDeviceConfigCmdType_Generic, // !< Generic command, for example: configure dummy cycles, drive strength, etc
kDeviceConfigCmdType_QuadEnable, // !< Quad Enable command
kDeviceConfigCmdType_Spi2Xpi, // !< Switch from SPI to DPI/QPI/OPI mode
kDeviceConfigCmdType_Xpi2Spi, // !< Switch from DPI/QPI/OPI to SPI mode
kDeviceConfigCmdType_Spi2NoCmd, // !< Switch to 0-4-4/0-8-8 mode
kDeviceConfigCmdType_Reset, // !< Reset device command
};
// !@brief FlexSPI Memory Configuration Block
typedef struct _FlexSPIConfig
{
uint32_t tag; // !< [0x000-0x003] Tag, fixed value 0x42464346UL
uint32_t version; // !< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
uint32_t reserved0; // !< [0x008-0x00b] Reserved for future use
uint8_t readSampleClkSrc; // !< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
uint8_t csHoldTime; // !< [0x00d-0x00d] CS hold time, default value: 3
uint8_t csSetupTime; // !< [0x00e-0x00e] CS setup time, default value: 3
uint8_t columnAddressWidth; // !< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For
// ! Serial NAND, need to refer to datasheet
uint8_t deviceModeCfgEnable; // !< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
uint8_t deviceModeType; // !< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch,
// ! Generic configuration, etc.
uint16_t waitTimeCfgCommands; // !< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for
// ! DPI/QPI/OPI switch or reset command
flexspi_lut_seq_t deviceModeSeq; // !< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt
// ! sequence number, [31:16] Reserved
uint32_t deviceModeArg; // !< [0x018-0x01b] Argument/Parameter for device configuration
uint8_t configCmdEnable; // !< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
uint8_t configModeType[3]; // !< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
flexspi_lut_seq_t
configCmdSeqs[3]; // !< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
uint32_t reserved1; // !< [0x02c-0x02f] Reserved for future use
uint32_t configCmdArgs[3]; // !< [0x030-0x03b] Arguments/Parameters for device Configuration commands
uint32_t reserved2; // !< [0x03c-0x03f] Reserved for future use
uint32_t controllerMiscOption; // !< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more
// ! details
uint8_t deviceType; // !< [0x044-0x044] Device Type: See Flash Type Definition for more details
uint8_t sflashPadType; // !< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
uint8_t serialClkFreq; // !< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot
// ! Chapter for more details
uint8_t lutCustomSeqEnable; // !< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot
// ! be done using 1 LUT sequence, currently, only applicable to HyperFLASH
uint32_t reserved3[2]; // !< [0x048-0x04f] Reserved for future use
uint32_t sflashA1Size; // !< [0x050-0x053] Size of Flash connected to A1
uint32_t sflashA2Size; // !< [0x054-0x057] Size of Flash connected to A2
uint32_t sflashB1Size; // !< [0x058-0x05b] Size of Flash connected to B1
uint32_t sflashB2Size; // !< [0x05c-0x05f] Size of Flash connected to B2
uint32_t csPadSettingOverride; // !< [0x060-0x063] CS pad setting override value
uint32_t sclkPadSettingOverride; // !< [0x064-0x067] SCK pad setting override value
uint32_t dataPadSettingOverride; // !< [0x068-0x06b] data pad setting override value
uint32_t dqsPadSettingOverride; // !< [0x06c-0x06f] DQS pad setting override value
uint32_t timeoutInMs; // !< [0x070-0x073] Timeout threshold for read status command
uint32_t commandInterval; // !< [0x074-0x077] CS deselect interval between two commands
uint16_t dataValidTime[2]; // !< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
uint16_t busyOffset; // !< [0x07c-0x07d] Busy offset, valid value: 0-31
uint16_t busyBitPolarity; // !< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 -
// ! busy flag is 0 when flash device is busy
uint32_t lookupTable[64]; // !< [0x080-0x17f] Lookup table holds Flash command sequences
flexspi_lut_seq_t lutCustomSeq[12]; // !< [0x180-0x1af] Customizable LUT Sequences
uint32_t reserved4[4]; // !< [0x1b0-0x1bf] Reserved for future use
} flexspi_mem_config_t;
/* */
#define NOR_CMD_LUT_SEQ_IDX_READ_NORMAL 0
#define NOR_CMD_LUT_SEQ_IDX_READSTATUSREG 1
#define NOR_CMD_LUT_SEQ_IDX_READ_FAST_QUAD 2
#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE 3
#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI 4
#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5
#define NOR_CMD_LUT_SEQ_IDX_WRITESTATUSREG 6
#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM_QUAD 7
#define NOR_CMD_LUT_SEQ_IDX_READID 8
#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM 9
#define NOR_CMD_LUT_SEQ_IDX_ENTERQPI 10
#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11
#define NOR_CMD_LUT_SEQ_IDX_EXITQPI 12
#define HYPERFLASH_CMD_LUT_SEQ_IDX_READDATA 0
#define HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEDATA 1
#define HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS 2
#define HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE 4
#define HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR 6
#define HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM 10
#define HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP 12
/*
* Serial NOR configuration block
*/
typedef struct _flexspi_nor_config
{
flexspi_mem_config_t memConfig; // !< Common memory configuration info via FlexSPI
uint32_t pageSize; // !< Page size of Serial NOR
uint32_t sectorSize; // !< Sector size of Serial NOR
uint8_t ipcmdSerialClkFreq; // !< Clock frequency for IP command
uint8_t isUniformBlockSize; // !< Sector/Block size is the same
uint8_t reserved0[2]; // !< Reserved for future use
uint8_t serialNorType; // !< Serial NOR Flash type: 0/1/2/3
uint8_t needExitNoCmdMode; // !< Need to exit NoCmd mode before other IP command
uint8_t halfClkForNonReadCmd; // !< Half the Serial Clock for non-read command: true/false
uint8_t needRestoreNoCmdMode; // !< Need to Restore NoCmd mode after IP commmand execution
uint32_t blockSize; // !< Block size
uint32_t reserve2[11]; // !< Reserved for future use
} flexspi_nor_config_t;
#define FLASH_BUSY_STATUS_POL 0
#define FLASH_BUSY_STATUS_OFFSET 0
#ifdef __cplusplus
extern "C" {
#endif
#ifdef __cplusplus
}
#endif
#endif /* __EVKMIMXRT1060_FLEXSPI_NOR_CONFIG__ */

122
ports/mimxrt/boards/MIMXRT1060_EVK/clock_config.h Normal file
View File

@ -0,0 +1,122 @@
/*
* Copyright 2018-2019 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef _CLOCK_CONFIG_H_
#define _CLOCK_CONFIG_H_
#include "fsl_common.h"
/*******************************************************************************
* Definitions
******************************************************************************/
#define BOARD_XTAL0_CLK_HZ 24000000U /*!< Board xtal0 frequency in Hz */
#define BOARD_XTAL32K_CLK_HZ 32768U /*!< Board xtal32k frequency in Hz */
/*******************************************************************************
************************ BOARD_InitBootClocks function ************************
******************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif /* __cplusplus*/
/*!
* @brief This function executes default configuration of clocks.
*
*/
void BOARD_InitBootClocks(void);
#if defined(__cplusplus)
}
#endif /* __cplusplus*/
/*******************************************************************************
********************** Configuration BOARD_BootClockRUN ***********************
******************************************************************************/
/*******************************************************************************
* Definitions for BOARD_BootClockRUN configuration
******************************************************************************/
#define BOARD_BOOTCLOCKRUN_CORE_CLOCK 600000000U /*!< Core clock frequency: 600000000Hz */
/* Clock outputs (values are in Hz): */
#define BOARD_BOOTCLOCKRUN_AHB_CLK_ROOT 600000000UL
#define BOARD_BOOTCLOCKRUN_CAN_CLK_ROOT 40000000UL
#define BOARD_BOOTCLOCKRUN_CKIL_SYNC_CLK_ROOT 32768UL
#define BOARD_BOOTCLOCKRUN_CLKO1_CLK 0UL
#define BOARD_BOOTCLOCKRUN_CLKO2_CLK 0UL
#define BOARD_BOOTCLOCKRUN_CLK_1M 1000000UL
#define BOARD_BOOTCLOCKRUN_CLK_24M 24000000UL
#define BOARD_BOOTCLOCKRUN_CSI_CLK_ROOT 12000000UL
#define BOARD_BOOTCLOCKRUN_ENET1_TX_CLK 2400000UL
#define BOARD_BOOTCLOCKRUN_ENET2_125M_CLK 1200000UL
#define BOARD_BOOTCLOCKRUN_ENET2_TX_CLK 1200000UL
#define BOARD_BOOTCLOCKRUN_ENET_125M_CLK 2400000UL
#define BOARD_BOOTCLOCKRUN_ENET_25M_REF_CLK 1200000UL
#define BOARD_BOOTCLOCKRUN_FLEXIO1_CLK_ROOT 30000000UL
#define BOARD_BOOTCLOCKRUN_FLEXIO2_CLK_ROOT 30000000UL
#define BOARD_BOOTCLOCKRUN_FLEXSPI2_CLK_ROOT 130909090UL
#define BOARD_BOOTCLOCKRUN_FLEXSPI_CLK_ROOT 130909090UL
#define BOARD_BOOTCLOCKRUN_GPT1_IPG_CLK_HIGHFREQ 75000000UL
#define BOARD_BOOTCLOCKRUN_GPT2_IPG_CLK_HIGHFREQ 75000000UL
#define BOARD_BOOTCLOCKRUN_IPG_CLK_ROOT 150000000UL
#define BOARD_BOOTCLOCKRUN_LCDIF_CLK_ROOT 9642857UL
#define BOARD_BOOTCLOCKRUN_LPI2C_CLK_ROOT 60000000UL
#define BOARD_BOOTCLOCKRUN_LPSPI_CLK_ROOT 105600000UL
#define BOARD_BOOTCLOCKRUN_LVDS1_CLK 1200000000UL
#define BOARD_BOOTCLOCKRUN_MQS_MCLK 63529411UL
#define BOARD_BOOTCLOCKRUN_PERCLK_CLK_ROOT 75000000UL
#define BOARD_BOOTCLOCKRUN_PLL7_MAIN_CLK 24000000UL
#define BOARD_BOOTCLOCKRUN_SAI1_CLK_ROOT 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI1_MCLK1 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI1_MCLK2 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI1_MCLK3 30000000UL
#define BOARD_BOOTCLOCKRUN_SAI2_CLK_ROOT 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI2_MCLK1 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI2_MCLK2 0UL
#define BOARD_BOOTCLOCKRUN_SAI2_MCLK3 30000000UL
#define BOARD_BOOTCLOCKRUN_SAI3_CLK_ROOT 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI3_MCLK1 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI3_MCLK2 0UL
#define BOARD_BOOTCLOCKRUN_SAI3_MCLK3 30000000UL
#define BOARD_BOOTCLOCKRUN_SEMC_CLK_ROOT 75000000UL
#define BOARD_BOOTCLOCKRUN_SPDIF0_CLK_ROOT 30000000UL
#define BOARD_BOOTCLOCKRUN_SPDIF0_EXTCLK_OUT 0UL
#define BOARD_BOOTCLOCKRUN_TRACE_CLK_ROOT 117333333UL
#define BOARD_BOOTCLOCKRUN_UART_CLK_ROOT 80000000UL
#define BOARD_BOOTCLOCKRUN_USBPHY1_CLK 0UL
#define BOARD_BOOTCLOCKRUN_USBPHY2_CLK 0UL
#define BOARD_BOOTCLOCKRUN_USDHC1_CLK_ROOT 198000000UL
#define BOARD_BOOTCLOCKRUN_USDHC2_CLK_ROOT 198000000UL
/*! @brief Arm PLL set for BOARD_BootClockRUN configuration.
*/
extern const clock_arm_pll_config_t armPllConfig_BOARD_BootClockRUN;
/*! @brief Usb1 PLL set for BOARD_BootClockRUN configuration.
*/
extern const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN;
/*! @brief Sys PLL for BOARD_BootClockRUN configuration.
*/
extern const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN;
/*******************************************************************************
* API for BOARD_BootClockRUN configuration
******************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif /* __cplusplus*/
/*!
* @brief This function executes configuration of clocks.
*
*/
void BOARD_BootClockRUN(void);
#if defined(__cplusplus)
}
#endif /* __cplusplus*/
#endif /* _CLOCK_CONFIG_H_ */

264
ports/mimxrt/boards/MIMXRT1060_EVK/evkmimxrt1060_flexspi_nor_config.h
View File

@ -1,264 +0,0 @@
/*
* Copyright 2018 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef __EVKMIMXRT1060_FLEXSPI_NOR_CONFIG__
#define __EVKMIMXRT1060_FLEXSPI_NOR_CONFIG__
#include <stdint.h>
#include <stdbool.h>
#include "fsl_flexspi.h"
/*! @name Driver version */
/*@{*/
/*! @brief XIP_BOARD driver version 2.0.0. */
#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0))
/*@}*/
/* FLEXSPI memory config block related defintions */
#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian
#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0
#define FLEXSPI_CFG_BLK_SIZE (512)
/* FLEXSPI Feature related definitions */
#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1
/* Lookup table related defintions */
#define CMD_INDEX_READ 0
#define CMD_INDEX_READSTATUS 1
#define CMD_INDEX_WRITEENABLE 2
#define CMD_INDEX_WRITE 4
#define CMD_LUT_SEQ_IDX_READ 0
#define CMD_LUT_SEQ_IDX_READSTATUS 1
#define CMD_LUT_SEQ_IDX_WRITEENABLE 3
#define CMD_LUT_SEQ_IDX_WRITE 9
#define CMD_SDR 0x01
#define CMD_DDR 0x21
#define RADDR_SDR 0x02
#define RADDR_DDR 0x22
#define CADDR_SDR 0x03
#define CADDR_DDR 0x23
#define MODE1_SDR 0x04
#define MODE1_DDR 0x24
#define MODE2_SDR 0x05
#define MODE2_DDR 0x25
#define MODE4_SDR 0x06
#define MODE4_DDR 0x26
#define MODE8_SDR 0x07
#define MODE8_DDR 0x27
#define WRITE_SDR 0x08
#define WRITE_DDR 0x28
#define READ_SDR 0x09
#define READ_DDR 0x29
#define LEARN_SDR 0x0A
#define LEARN_DDR 0x2A
#define DATSZ_SDR 0x0B
#define DATSZ_DDR 0x2B
#define DUMMY_SDR 0x0C
#define DUMMY_DDR 0x2C
#define DUMMY_RWDS_SDR 0x0D
#define DUMMY_RWDS_DDR 0x2D
#define JMP_ON_CS 0x1F
#define STOP 0
#define FLEXSPI_1PAD 0
#define FLEXSPI_2PAD 1
#define FLEXSPI_4PAD 2
#define FLEXSPI_8PAD 3
#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \
(FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \
FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1))
//!@brief Definitions for FlexSPI Serial Clock Frequency
typedef enum _FlexSpiSerialClockFreq
{
kFlexSpiSerialClk_30MHz = 1,
kFlexSpiSerialClk_50MHz = 2,
kFlexSpiSerialClk_60MHz = 3,
kFlexSpiSerialClk_75MHz = 4,
kFlexSpiSerialClk_80MHz = 5,
kFlexSpiSerialClk_100MHz = 6,
kFlexSpiSerialClk_120MHz = 7,
kFlexSpiSerialClk_133MHz = 8,
kFlexSpiSerialClk_166MHz = 9,
} flexspi_serial_clk_freq_t;
//!@brief FlexSPI clock configuration type
enum
{
kFlexSpiClk_SDR, //!< Clock configure for SDR mode
kFlexSpiClk_DDR, //!< Clock configurat for DDR mode
};
//!@brief FlexSPI Read Sample Clock Source definition
typedef enum _FlashReadSampleClkSource
{
kFlexSPIReadSampleClk_LoopbackInternally = 0,
kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1,
kFlexSPIReadSampleClk_LoopbackFromSckPad = 2,
kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3,
} flexspi_read_sample_clk_t;
//!@brief Misc feature bit definitions
enum
{
kFlexSpiMiscOffset_DiffClkEnable = 0, //!< Bit for Differential clock enable
kFlexSpiMiscOffset_Ck2Enable = 1, //!< Bit for CK2 enable
kFlexSpiMiscOffset_ParallelEnable = 2, //!< Bit for Parallel mode enable
kFlexSpiMiscOffset_WordAddressableEnable = 3, //!< Bit for Word Addressable enable
kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, //!< Bit for Safe Configuration Frequency enable
kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, //!< Bit for Pad setting override enable
kFlexSpiMiscOffset_DdrModeEnable = 6, //!< Bit for DDR clock confiuration indication.
};
//!@brief Flash Type Definition
enum
{
kFlexSpiDeviceType_SerialNOR = 1, //!< Flash devices are Serial NOR
kFlexSpiDeviceType_SerialNAND = 2, //!< Flash devices are Serial NAND
kFlexSpiDeviceType_SerialRAM = 3, //!< Flash devices are Serial RAM/HyperFLASH
kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND
kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, //!< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs
};
//!@brief Flash Pad Definitions
enum
{
kSerialFlash_1Pad = 1,
kSerialFlash_2Pads = 2,
kSerialFlash_4Pads = 4,
kSerialFlash_8Pads = 8,
};
//!@brief FlexSPI LUT Sequence structure
typedef struct _lut_sequence
{
uint8_t seqNum; //!< Sequence Number, valid number: 1-16
uint8_t seqId; //!< Sequence Index, valid number: 0-15
uint16_t reserved;
} flexspi_lut_seq_t;
//!@brief Flash Configuration Command Type
enum
{
kDeviceConfigCmdType_Generic, //!< Generic command, for example: configure dummy cycles, drive strength, etc
kDeviceConfigCmdType_QuadEnable, //!< Quad Enable command
kDeviceConfigCmdType_Spi2Xpi, //!< Switch from SPI to DPI/QPI/OPI mode
kDeviceConfigCmdType_Xpi2Spi, //!< Switch from DPI/QPI/OPI to SPI mode
kDeviceConfigCmdType_Spi2NoCmd, //!< Switch to 0-4-4/0-8-8 mode
kDeviceConfigCmdType_Reset, //!< Reset device command
};
//!@brief FlexSPI Memory Configuration Block
typedef struct _FlexSPIConfig
{
uint32_t tag; //!< [0x000-0x003] Tag, fixed value 0x42464346UL
uint32_t version; //!< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
uint32_t reserved0; //!< [0x008-0x00b] Reserved for future use
uint8_t readSampleClkSrc; //!< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
uint8_t csHoldTime; //!< [0x00d-0x00d] CS hold time, default value: 3
uint8_t csSetupTime; //!< [0x00e-0x00e] CS setup time, default value: 3
uint8_t columnAddressWidth; //!< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For
//! Serial NAND, need to refer to datasheet
uint8_t deviceModeCfgEnable; //!< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
uint8_t deviceModeType; //!< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch,
//! Generic configuration, etc.
uint16_t waitTimeCfgCommands; //!< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for
//! DPI/QPI/OPI switch or reset command
flexspi_lut_seq_t deviceModeSeq; //!< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt
//! sequence number, [31:16] Reserved
uint32_t deviceModeArg; //!< [0x018-0x01b] Argument/Parameter for device configuration
uint8_t configCmdEnable; //!< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
uint8_t configModeType[3]; //!< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
flexspi_lut_seq_t
configCmdSeqs[3]; //!< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
uint32_t reserved1; //!< [0x02c-0x02f] Reserved for future use
uint32_t configCmdArgs[3]; //!< [0x030-0x03b] Arguments/Parameters for device Configuration commands
uint32_t reserved2; //!< [0x03c-0x03f] Reserved for future use
uint32_t controllerMiscOption; //!< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more
//! details
uint8_t deviceType; //!< [0x044-0x044] Device Type: See Flash Type Definition for more details
uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot
//! Chapter for more details
uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot
//! be done using 1 LUT sequence, currently, only applicable to HyperFLASH
uint32_t reserved3[2]; //!< [0x048-0x04f] Reserved for future use
uint32_t sflashA1Size; //!< [0x050-0x053] Size of Flash connected to A1
uint32_t sflashA2Size; //!< [0x054-0x057] Size of Flash connected to A2
uint32_t sflashB1Size; //!< [0x058-0x05b] Size of Flash connected to B1
uint32_t sflashB2Size; //!< [0x05c-0x05f] Size of Flash connected to B2
uint32_t csPadSettingOverride; //!< [0x060-0x063] CS pad setting override value
uint32_t sclkPadSettingOverride; //!< [0x064-0x067] SCK pad setting override value
uint32_t dataPadSettingOverride; //!< [0x068-0x06b] data pad setting override value
uint32_t dqsPadSettingOverride; //!< [0x06c-0x06f] DQS pad setting override value
uint32_t timeoutInMs; //!< [0x070-0x073] Timeout threshold for read status command
uint32_t commandInterval; //!< [0x074-0x077] CS deselect interval between two commands
uint16_t dataValidTime[2]; //!< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
uint16_t busyOffset; //!< [0x07c-0x07d] Busy offset, valid value: 0-31
uint16_t busyBitPolarity; //!< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 -
//! busy flag is 0 when flash device is busy
uint32_t lookupTable[64]; //!< [0x080-0x17f] Lookup table holds Flash command sequences
flexspi_lut_seq_t lutCustomSeq[12]; //!< [0x180-0x1af] Customizable LUT Sequences
uint32_t reserved4[4]; //!< [0x1b0-0x1bf] Reserved for future use
} flexspi_mem_config_t;
/* */
#define NOR_CMD_LUT_SEQ_IDX_READ_NORMAL 0
#define NOR_CMD_LUT_SEQ_IDX_READSTATUSREG 1
#define NOR_CMD_LUT_SEQ_IDX_READ_FAST_QUAD 2
#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE 3
#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI 4
#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5
#define NOR_CMD_LUT_SEQ_IDX_WRITESTATUSREG 6
#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM_QUAD 7
#define NOR_CMD_LUT_SEQ_IDX_READID 8
#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM 9
#define NOR_CMD_LUT_SEQ_IDX_ENTERQPI 10
#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11
#define NOR_CMD_LUT_SEQ_IDX_EXITQPI 12
#define HYPERFLASH_CMD_LUT_SEQ_IDX_READDATA 0
#define HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEDATA 1
#define HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS 2
#define HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE 4
#define HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR 6
#define HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM 10
#define HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP 12
/*
* Serial NOR configuration block
*/
typedef struct _flexspi_nor_config
{
flexspi_mem_config_t memConfig; //!< Common memory configuration info via FlexSPI
uint32_t pageSize; //!< Page size of Serial NOR
uint32_t sectorSize; //!< Sector size of Serial NOR
uint8_t ipcmdSerialClkFreq; //!< Clock frequency for IP command
uint8_t isUniformBlockSize; //!< Sector/Block size is the same
uint8_t reserved0[2]; //!< Reserved for future use
uint8_t serialNorType; //!< Serial NOR Flash type: 0/1/2/3
uint8_t needExitNoCmdMode; //!< Need to exit NoCmd mode before other IP command
uint8_t halfClkForNonReadCmd; //!< Half the Serial Clock for non-read command: true/false
uint8_t needRestoreNoCmdMode; //!< Need to Restore NoCmd mode after IP commmand execution
uint32_t blockSize; //!< Block size
uint32_t reserve2[11]; //!< Reserved for future use
} flexspi_nor_config_t;
#define FLASH_BUSY_STATUS_POL 0
#define FLASH_BUSY_STATUS_OFFSET 0
#ifdef __cplusplus
extern "C" {
#endif
#ifdef __cplusplus
}
#endif
#endif /* __EVKMIMXRT1060_FLEXSPI_NOR_CONFIG__ */

186
ports/mimxrt/boards/MIMXRT1060_EVK/flash_config.c
View File

@ -1,186 +0,0 @@
/*
* Copyright 2018 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include "evkmimxrt1060_flexspi_nor_config.h"
/* Component ID definition, used by tools. */
#ifndef FSL_COMPONENT_ID
#define FSL_COMPONENT_ID "platform.drivers.xip_board"
#endif
/*******************************************************************************
* Code
******************************************************************************/
#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1)
#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__)
__attribute__((section(".boot_hdr.conf")))
#elif defined(__ICCARM__)
#pragma location = ".boot_hdr.conf"
#endif
const flexspi_nor_config_t qspiflash_config = {
.memConfig =
{
.tag = FLEXSPI_CFG_BLK_TAG,
.version = FLEXSPI_CFG_BLK_VERSION,
.readSampleClkSrc = kFlexSPIReadSampleClk_ExternalInputFromDqsPad,
.csHoldTime = 3u,
.csSetupTime = 3u,
.columnAddressWidth = 3u,
// Enable DDR mode, Wordaddressable, Safe configuration, Differential clock
.controllerMiscOption =
(1u << kFlexSpiMiscOffset_DdrModeEnable) | (1u << kFlexSpiMiscOffset_WordAddressableEnable) |
(1u << kFlexSpiMiscOffset_SafeConfigFreqEnable) | (1u << kFlexSpiMiscOffset_DiffClkEnable),
.sflashPadType = kSerialFlash_8Pads,
.serialClkFreq = kFlexSpiSerialClk_133MHz,
.sflashA1Size = 64u * 1024u * 1024u,
.dataValidTime = {16u, 16u},
.lookupTable =
{
/* 0 Read Data */
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READDATA] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xA0, kFLEXSPI_Command_RADDR_DDR, kFLEXSPI_8PAD, 0x18),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READDATA + 1] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_CADDR_DDR, kFLEXSPI_8PAD, 0x10, kFLEXSPI_Command_READ_DDR, kFLEXSPI_8PAD, 0x04),
/* 1 Write Data */
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEDATA] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x20, kFLEXSPI_Command_RADDR_DDR, kFLEXSPI_8PAD, 0x18),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEDATA + 1] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_CADDR_DDR, kFLEXSPI_8PAD, 0x10, kFLEXSPI_Command_WRITE_DDR, kFLEXSPI_8PAD, 0x02),
/* 2 Read Status */
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS + 1] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA), // ADDR 0x555
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS + 2] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS + 3] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x70), // DATA 0x70
// +1
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS + 4] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xA0, kFLEXSPI_Command_RADDR_DDR, kFLEXSPI_8PAD, 0x18),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS + 5] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_CADDR_DDR, kFLEXSPI_8PAD, 0x10, kFLEXSPI_Command_DUMMY_RWDS_DDR, kFLEXSPI_8PAD, 0x0B),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS + 6] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_READ_DDR, kFLEXSPI_8PAD, 0x04, kFLEXSPI_Command_STOP, kFLEXSPI_1PAD, 0x0),
/* 4 Write Enable */
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x20, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE + 1] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA), // ADDR 0x555
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE + 2] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE + 3] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA), // DATA 0xAA
// +1
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE + 4] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x20, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE + 5] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x55),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE + 6] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x02),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE + 7] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x55),
/* 6 Erase Sector */
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 1] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA), // ADDR 0x555
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 2] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 3] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x80), // DATA 0x80
// +1
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 4] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 5] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 6] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 7] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA), // ADDR 0x555
// +2
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 8] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 9] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x55),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 10] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x02),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 11] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x55),
// +3
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 12] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_RADDR_DDR, kFLEXSPI_8PAD, 0x18),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 13] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_CADDR_DDR, kFLEXSPI_8PAD, 0x10, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 14] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x30, kFLEXSPI_Command_STOP, kFLEXSPI_1PAD, 0x00),
/* 10 program page with word program command sequence */
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x20, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM + 1] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA), // ADDR 0x555
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM + 2] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM + 3] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xA0), // DATA 0xA0
// +1
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM + 4] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x20, kFLEXSPI_Command_RADDR_DDR, kFLEXSPI_8PAD, 0x18),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM + 5] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_CADDR_DDR, kFLEXSPI_8PAD, 0x10, kFLEXSPI_Command_WRITE_DDR, kFLEXSPI_8PAD, 0x80),
/* 12 Erase chip */
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 1] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 2] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 3] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x80),
// +1
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 4] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 5] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 6] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 7] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA),
// +2
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 8] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 9] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x55),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 10] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x02),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 11] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x55),
// +3
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 12] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 13] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 14] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 15] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x10),
},
},
.pageSize = 512u,
.sectorSize = 256u * 1024u,
.blockSize = 256u * 1024u,
.isUniformBlockSize = true,
};
#endif /* XIP_BOOT_HEADER_ENABLE */

18
ports/mimxrt/boards/MIMXRT1060_EVK/mpconfigboard.h
View File

@ -1,14 +1,10 @@
#define MICROPY_HW_BOARD_NAME "i.MX RT1060 EVK"
#define MICROPY_HW_MCU_NAME "MIMXRT1062DVJ6A"
#define BOARD_FLASH_SIZE (8 * 1024 * 1024)
// MIMXRT1060_EVK has 1 user LED
#define MICROPY_HW_LED1_PIN (pin_GPIO_AD_B0_09)
#define MICROPY_HW_LED_ON(pin) (mp_hal_pin_low(pin))
#define MICROPY_HW_LED_OFF(pin) (mp_hal_pin_high(pin))
#define BOARD_FLASH_CONFIG_HEADER_H "evkmimxrt1060_flexspi_nor_config.h"
#define BOARD_FLASH_OPS_HEADER_H "hal/flexspi_hyper_flash.h"
#define MICROPY_HW_NUM_PIN_IRQS (4 * 32 + 3)
@ -38,10 +34,10 @@
{ IOMUXC_GPIO_SD_B0_02_LPSPI1_SDO }, { IOMUXC_GPIO_SD_B0_03_LPSPI1_SDI },
#define DMA_REQ_SRC_RX { 0, kDmaRequestMuxLPSPI1Rx, kDmaRequestMuxLPSPI2Rx, \
kDmaRequestMuxLPSPI3Rx, kDmaRequestMuxLPSPI4Rx }
kDmaRequestMuxLPSPI3Rx, kDmaRequestMuxLPSPI4Rx }
#define DMA_REQ_SRC_TX { 0, kDmaRequestMuxLPSPI1Tx, kDmaRequestMuxLPSPI2Tx, \
kDmaRequestMuxLPSPI3Tx, kDmaRequestMuxLPSPI4Tx }
kDmaRequestMuxLPSPI3Tx, kDmaRequestMuxLPSPI4Tx }
// Define the mapping hardware I2C # to logical I2C #
// SDA/SCL HW-I2C Logical I2C
@ -60,9 +56,9 @@
{ \
.cmd = {GPIO_SD_B0_00_USDHC1_CMD}, \
.clk = { GPIO_SD_B0_01_USDHC1_CLK }, \
.cd_b = { GPIO_B1_12_USDHC1_CD_B },\
.data0 = { GPIO_SD_B0_02_USDHC1_DATA0 },\
.data1 = { GPIO_SD_B0_03_USDHC1_DATA1 },\
.data2 = { GPIO_SD_B0_04_USDHC1_DATA2 },\
.data3 = { GPIO_SD_B0_05_USDHC1_DATA3 },\
.cd_b = { GPIO_B1_12_USDHC1_CD_B }, \
.data0 = { GPIO_SD_B0_02_USDHC1_DATA0 }, \
.data1 = { GPIO_SD_B0_03_USDHC1_DATA1 }, \
.data2 = { GPIO_SD_B0_04_USDHC1_DATA2 }, \
.data3 = { GPIO_SD_B0_05_USDHC1_DATA3 }, \
}

6
ports/mimxrt/boards/MIMXRT1060_EVK/mpconfigboard.mk
View File

@ -3,20 +3,18 @@ MCU_VARIANT = MIMXRT1062DVJ6A
MICROPY_FLOAT_IMPL = double
MICROPY_PY_MACHINE_SDCARD = 1
BOARD_FLASH_TYPE ?= qspi_nor
BOARD_FLASH_SIZE ?= 0x800000 # 8MB
JLINK_PATH ?= /media/RT1060-EVK/
JLINK_COMMANDER_SCRIPT = $(BUILD)/script.jlink
ifdef JLINK_IP
JLINK_CONNECTION_SETTINGS = -IP $(JLINK_IP)
else
JLINK_CONNECTION_SETTINGS = -USB
endif
SRC_C += \
hal/flexspi_hyper_flash.c
deploy_jlink: $(BUILD)/firmware.hex
$(Q)$(TOUCH) $(JLINK_COMMANDER_SCRIPT)
$(ECHO) "ExitOnError 1" > $(JLINK_COMMANDER_SCRIPT)

186
ports/mimxrt/boards/MIMXRT1060_EVK/qspi_hyper_flash_config.c Normal file
View File

@ -0,0 +1,186 @@
/*
* Copyright 2018 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include BOARD_FLASH_CONFIG_HEADER_H
/* Component ID definition, used by tools. */
#ifndef FSL_COMPONENT_ID
#define FSL_COMPONENT_ID "platform.drivers.xip_board"
#endif
/*******************************************************************************
* Code
******************************************************************************/
#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1)
#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__)
__attribute__((section(".boot_hdr.conf")))
#elif defined(__ICCARM__)
#pragma location = ".boot_hdr.conf"
#endif
const flexspi_nor_config_t qspiflash_config = {
.memConfig =
{
.tag = FLEXSPI_CFG_BLK_TAG,
.version = FLEXSPI_CFG_BLK_VERSION,
.readSampleClkSrc = kFlexSPIReadSampleClk_ExternalInputFromDqsPad,
.csHoldTime = 3u,
.csSetupTime = 3u,
.columnAddressWidth = 3u,
// Enable DDR mode, Wordaddressable, Safe configuration, Differential clock
.controllerMiscOption =
(1u << kFlexSpiMiscOffset_DdrModeEnable) | (1u << kFlexSpiMiscOffset_WordAddressableEnable) |
(1u << kFlexSpiMiscOffset_SafeConfigFreqEnable) | (1u << kFlexSpiMiscOffset_DiffClkEnable),
.sflashPadType = kSerialFlash_8Pads,
.serialClkFreq = kFlexSpiSerialClk_133MHz,
.sflashA1Size = BOARD_FLASH_SIZE,
.dataValidTime = {16u, 16u},
.lookupTable =
{
/* 0 Read Data */
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READDATA] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xA0, kFLEXSPI_Command_RADDR_DDR, kFLEXSPI_8PAD, 0x18),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READDATA + 1] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_CADDR_DDR, kFLEXSPI_8PAD, 0x10, kFLEXSPI_Command_READ_DDR, kFLEXSPI_8PAD, 0x04),
/* 1 Write Data */
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEDATA] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x20, kFLEXSPI_Command_RADDR_DDR, kFLEXSPI_8PAD, 0x18),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEDATA + 1] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_CADDR_DDR, kFLEXSPI_8PAD, 0x10, kFLEXSPI_Command_WRITE_DDR, kFLEXSPI_8PAD, 0x02),
/* 2 Read Status */
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS + 1] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA), // ADDR 0x555
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS + 2] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS + 3] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x70), // DATA 0x70
// +1
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS + 4] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xA0, kFLEXSPI_Command_RADDR_DDR, kFLEXSPI_8PAD, 0x18),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS + 5] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_CADDR_DDR, kFLEXSPI_8PAD, 0x10, kFLEXSPI_Command_DUMMY_RWDS_DDR, kFLEXSPI_8PAD, 0x0B),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS + 6] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_READ_DDR, kFLEXSPI_8PAD, 0x04, kFLEXSPI_Command_STOP, kFLEXSPI_1PAD, 0x0),
/* 4 Write Enable */
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x20, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE + 1] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA), // ADDR 0x555
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE + 2] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE + 3] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA), // DATA 0xAA
// +1
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE + 4] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x20, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE + 5] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x55),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE + 6] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x02),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE + 7] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x55),
/* 6 Erase Sector */
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 1] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA), // ADDR 0x555
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 2] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 3] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x80), // DATA 0x80
// +1
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 4] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 5] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 6] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 7] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA), // ADDR 0x555
// +2
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 8] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 9] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x55),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 10] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x02),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 11] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x55),
// +3
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 12] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_RADDR_DDR, kFLEXSPI_8PAD, 0x18),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 13] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_CADDR_DDR, kFLEXSPI_8PAD, 0x10, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 14] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x30, kFLEXSPI_Command_STOP, kFLEXSPI_1PAD, 0x00),
/* 10 program page with word program command sequence */
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x20, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM + 1] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA), // ADDR 0x555
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM + 2] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM + 3] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xA0), // DATA 0xA0
// +1
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM + 4] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x20, kFLEXSPI_Command_RADDR_DDR, kFLEXSPI_8PAD, 0x18),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM + 5] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_CADDR_DDR, kFLEXSPI_8PAD, 0x10, kFLEXSPI_Command_WRITE_DDR, kFLEXSPI_8PAD, 0x80),
/* 12 Erase chip */
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 1] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 2] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 3] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x80),
// +1
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 4] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 5] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 6] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 7] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA),
// +2
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 8] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 9] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x55),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 10] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x02),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 11] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x55),
// +3
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 12] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 13] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 14] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 15] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x10),
},
},
.pageSize = 512u,
.sectorSize = 256u * 1024u,
.blockSize = 256u * 1024u,
.isUniformBlockSize = true,
};
#endif /* XIP_BOOT_HEADER_ENABLE */

129
ports/mimxrt/boards/MIMXRT1060_EVK/qspi_nor_flash_config.c Normal file
View File

@ -0,0 +1,129 @@
/*
* Copyright 2018 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include BOARD_FLASH_CONFIG_HEADER_H
/* Component ID definition, used by tools. */
#ifndef FSL_COMPONENT_ID
#define FSL_COMPONENT_ID "platform.drivers.xip_board"
#endif
/*******************************************************************************
* Code
******************************************************************************/
#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1)
#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__)
__attribute__((section(".boot_hdr.conf")))
#elif defined(__ICCARM__)
#pragma location = ".boot_hdr.conf"
#endif
const flexspi_nor_config_t qspiflash_config = {
.memConfig =
{
.tag = FLEXSPI_CFG_BLK_TAG,
.version = FLEXSPI_CFG_BLK_VERSION,
.readSampleClkSrc = kFlexSPIReadSampleClk_ExternalInputFromDqsPad,
.csHoldTime = 3u,
.csSetupTime = 3u,
.columnAddressWidth = 3u,
// Enable DDR mode, Wordaddassable, Safe configuration, Differential clock
.controllerMiscOption =
(1u << kFlexSpiMiscOffset_DdrModeEnable) | (1u << kFlexSpiMiscOffset_WordAddressableEnable) |
(1u << kFlexSpiMiscOffset_SafeConfigFreqEnable) | (1u << kFlexSpiMiscOffset_DiffClkEnable),
.sflashPadType = kSerialFlash_8Pads,
.serialClkFreq = kFlexSpiSerialClk_133MHz,
.sflashA1Size = BOARD_FLASH_SIZE,
.dataValidTime = {16u, 16u},
.lookupTable =
{
// 0 Read LUTs 0 -> 0
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18),
FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 1 Read status register -> 1
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x05, READ_SDR, FLEXSPI_1PAD, 0x01),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 2 Fast read quad mode - SDR
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x6B, RADDR_SDR, FLEXSPI_1PAD, 0x18),
FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x08, READ_SDR, FLEXSPI_4PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 3 Write Enable -> 3
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x06, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 4 Read extend parameters
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x81, READ_SDR, FLEXSPI_1PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 5 Erase Sector -> 5
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x20, RADDR_SDR, FLEXSPI_1PAD, 24),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 6 Write Status Reg
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x01, WRITE_SDR, FLEXSPI_1PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 7 Page Program - quad mode (-> 9)
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x32, RADDR_SDR, FLEXSPI_1PAD, 0x18),
FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_4PAD, 0x04, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 8 Read ID
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x90, DUMMY_SDR, FLEXSPI_1PAD, 24),
FLEXSPI_LUT_SEQ(READ_SDR, FLEXSPI_1PAD, 0x00, 0, 0, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 9 Page Program - single mode -> 9
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x02, RADDR_SDR, FLEXSPI_1PAD, 24),
FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0, 0, 0, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 10 Enter QPI mode
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x35, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 11 Erase Chip
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x60, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 12 Exit QPI mode
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_4PAD, 0xF5, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
},
},
.pageSize = 512u,
.sectorSize = 256u * 1024u,
.blockSize = 256u * 1024u,
.isUniformBlockSize = true,
};
#endif /* XIP_BOOT_HEADER_ENABLE */

19
ports/mimxrt/boards/MIMXRT1062.ld
View File

@ -1,14 +1,25 @@
/* Memory configuration */
#if BOARD_FLASH_RESERVED
reserved_size = BOARD_FLASH_RESERVED;
#endif
#if BOARD_FLASH_TYPE==qspi_nor
flash_start = 0x60000000;
#elif BOARD_FLASH_TYPE==hyperflash
flash_start = 0x60000000;
#else
#error Unknown BOARD_FLASH_TYPE
#endif
flash_size = BOARD_FLASH_SIZE;
flash_end = DEFINED(reserved_size) ? ((flash_start) + (flash_size - reserved_size)) : ((flash_start) + (flash_size));
flash_config_start = flash_start;
flash_config_size = 0x00001000;
ivt_start = 0x60001000;
ivt_start = flash_start + 0x00001000;
ivt_size = 0x00001000;
interrupts_start = 0x60002000;
interrupts_start = flash_start + 0x00002000;
interrupts_size = 0x00000400;
text_start = 0x60002400;
vfs_start = 0x60100000;
text_start = flash_start + 0x00002400;
vfs_start = flash_start + 0x00100000;
text_size = ((vfs_start) - (text_start));
vfs_size = ((flash_end) - (vfs_start));
itcm_start = 0x00000000;

21
ports/mimxrt/boards/MIMXRT1064.ld
View File

@ -1,14 +1,27 @@
/* Memory configuration */
#if BOARD_FLASH_RESERVED
reserved_size = BOARD_FLASH_RESERVED;
#endif
#if BOARD_FLASH_TYPE==qspi_nor
flash_start = 0x60000000;
#elif BOARD_FLASH_TYPE==hyperflash
flash_start = 0x60000000;
#elif BOARD_FLASH_TYPE==internal
flash_start = 0x70000000;
#else
#error Unknown BOARD_FLASH_TYPE
#endif
flash_size = BOARD_FLASH_SIZE;
flash_end = DEFINED(reserved_size) ? ((flash_start) + (flash_size - reserved_size)) : ((flash_start) + (flash_size));
flash_config_start = flash_start;
flash_config_size = 0x00001000;
ivt_start = 0x60001000;
ivt_start = flash_start + 0x00001000;
ivt_size = 0x00001000;
interrupts_start = 0x60002000;
interrupts_start = flash_start + 0x00002000;
interrupts_size = 0x00000400;
text_start = 0x60002400;
vfs_start = 0x60100000;
text_start = flash_start + 0x00002400;
vfs_start = flash_start + 0x00100000;
text_size = ((vfs_start) - (text_start));
vfs_size = ((flash_end) - (vfs_start));
itcm_start = 0x00000000;

1
ports/mimxrt/boards/MIMXRT1064_EVK/MIMXRT1064_EVK.ld
View File

@ -1 +0,0 @@
flash_size = 64M;

264
ports/mimxrt/boards/MIMXRT1064_EVK/MIMXRT1064_EVK_flexspi_nor_config.h Normal file
View File

@ -0,0 +1,264 @@
/*
* Copyright 2018 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef __EVKMIMXRT1064_FLEXSPI_NOR_CONFIG__
#define __EVKMIMXRT1064_FLEXSPI_NOR_CONFIG__
#include <stdint.h>
#include <stdbool.h>
#include "fsl_flexspi.h"
/*! @name Driver version */
/*@{*/
/*! @brief XIP_BOARD driver version 2.0.0. */
#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0))
/*@}*/
/* FLEXSPI memory config block related defintions */
#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian
#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0
#define FLEXSPI_CFG_BLK_SIZE (512)
/* FLEXSPI Feature related definitions */
#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1
/* Lookup table related defintions */
#define CMD_INDEX_READ 0
#define CMD_INDEX_READSTATUS 1
#define CMD_INDEX_WRITEENABLE 2
#define CMD_INDEX_WRITE 4
#define CMD_LUT_SEQ_IDX_READ 0
#define CMD_LUT_SEQ_IDX_READSTATUS 1
#define CMD_LUT_SEQ_IDX_WRITEENABLE 3
#define CMD_LUT_SEQ_IDX_WRITE 9
#define CMD_SDR 0x01
#define CMD_DDR 0x21
#define RADDR_SDR 0x02
#define RADDR_DDR 0x22
#define CADDR_SDR 0x03
#define CADDR_DDR 0x23
#define MODE1_SDR 0x04
#define MODE1_DDR 0x24
#define MODE2_SDR 0x05
#define MODE2_DDR 0x25
#define MODE4_SDR 0x06
#define MODE4_DDR 0x26
#define MODE8_SDR 0x07
#define MODE8_DDR 0x27
#define WRITE_SDR 0x08
#define WRITE_DDR 0x28
#define READ_SDR 0x09
#define READ_DDR 0x29
#define LEARN_SDR 0x0A
#define LEARN_DDR 0x2A
#define DATSZ_SDR 0x0B
#define DATSZ_DDR 0x2B
#define DUMMY_SDR 0x0C
#define DUMMY_DDR 0x2C
#define DUMMY_RWDS_SDR 0x0D
#define DUMMY_RWDS_DDR 0x2D
#define JMP_ON_CS 0x1F
#define STOP 0
#define FLEXSPI_1PAD 0
#define FLEXSPI_2PAD 1
#define FLEXSPI_4PAD 2
#define FLEXSPI_8PAD 3
#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \
(FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \
FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1))
// !@brief Definitions for FlexSPI Serial Clock Frequency
typedef enum _FlexSpiSerialClockFreq
{
kFlexSpiSerialClk_30MHz = 1,
kFlexSpiSerialClk_50MHz = 2,
kFlexSpiSerialClk_60MHz = 3,
kFlexSpiSerialClk_75MHz = 4,
kFlexSpiSerialClk_80MHz = 5,
kFlexSpiSerialClk_100MHz = 6,
kFlexSpiSerialClk_120MHz = 7,
kFlexSpiSerialClk_133MHz = 8,
kFlexSpiSerialClk_166MHz = 9,
} flexspi_serial_clk_freq_t;
// !@brief FlexSPI clock configuration type
enum
{
kFlexSpiClk_SDR, // !< Clock configure for SDR mode
kFlexSpiClk_DDR, // !< Clock configurat for DDR mode
};
// !@brief FlexSPI Read Sample Clock Source definition
typedef enum _FlashReadSampleClkSource
{
kFlexSPIReadSampleClk_LoopbackInternally = 0,
kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1,
kFlexSPIReadSampleClk_LoopbackFromSckPad = 2,
kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3,
} flexspi_read_sample_clk_t;
// !@brief Misc feature bit definitions
enum
{
kFlexSpiMiscOffset_DiffClkEnable = 0, // !< Bit for Differential clock enable
kFlexSpiMiscOffset_Ck2Enable = 1, // !< Bit for CK2 enable
kFlexSpiMiscOffset_ParallelEnable = 2, // !< Bit for Parallel mode enable
kFlexSpiMiscOffset_WordAddressableEnable = 3, // !< Bit for Word Addressable enable
kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, // !< Bit for Safe Configuration Frequency enable
kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, // !< Bit for Pad setting override enable
kFlexSpiMiscOffset_DdrModeEnable = 6, // !< Bit for DDR clock confiuration indication.
};
// !@brief Flash Type Definition
enum
{
kFlexSpiDeviceType_SerialNOR = 1, // !< Flash devices are Serial NOR
kFlexSpiDeviceType_SerialNAND = 2, // !< Flash devices are Serial NAND
kFlexSpiDeviceType_SerialRAM = 3, // !< Flash devices are Serial RAM/HyperFLASH
kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, // !< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND
kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, // !< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs
};
// !@brief Flash Pad Definitions
enum
{
kSerialFlash_1Pad = 1,
kSerialFlash_2Pads = 2,
kSerialFlash_4Pads = 4,
kSerialFlash_8Pads = 8,
};
// !@brief FlexSPI LUT Sequence structure
typedef struct _lut_sequence
{
uint8_t seqNum; // !< Sequence Number, valid number: 1-16
uint8_t seqId; // !< Sequence Index, valid number: 0-15
uint16_t reserved;
} flexspi_lut_seq_t;
// !@brief Flash Configuration Command Type
enum
{
kDeviceConfigCmdType_Generic, // !< Generic command, for example: configure dummy cycles, drive strength, etc
kDeviceConfigCmdType_QuadEnable, // !< Quad Enable command
kDeviceConfigCmdType_Spi2Xpi, // !< Switch from SPI to DPI/QPI/OPI mode
kDeviceConfigCmdType_Xpi2Spi, // !< Switch from DPI/QPI/OPI to SPI mode
kDeviceConfigCmdType_Spi2NoCmd, // !< Switch to 0-4-4/0-8-8 mode
kDeviceConfigCmdType_Reset, // !< Reset device command
};
// !@brief FlexSPI Memory Configuration Block
typedef struct _FlexSPIConfig
{
uint32_t tag; // !< [0x000-0x003] Tag, fixed value 0x42464346UL
uint32_t version; // !< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
uint32_t reserved0; // !< [0x008-0x00b] Reserved for future use
uint8_t readSampleClkSrc; // !< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
uint8_t csHoldTime; // !< [0x00d-0x00d] CS hold time, default value: 3
uint8_t csSetupTime; // !< [0x00e-0x00e] CS setup time, default value: 3
uint8_t columnAddressWidth; // !< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For
// ! Serial NAND, need to refer to datasheet
uint8_t deviceModeCfgEnable; // !< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
uint8_t deviceModeType; // !< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch,
// ! Generic configuration, etc.
uint16_t waitTimeCfgCommands; // !< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for
// ! DPI/QPI/OPI switch or reset command
flexspi_lut_seq_t deviceModeSeq; // !< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt
// ! sequence number, [31:16] Reserved
uint32_t deviceModeArg; // !< [0x018-0x01b] Argument/Parameter for device configuration
uint8_t configCmdEnable; // !< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
uint8_t configModeType[3]; // !< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
flexspi_lut_seq_t
configCmdSeqs[3]; // !< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
uint32_t reserved1; // !< [0x02c-0x02f] Reserved for future use
uint32_t configCmdArgs[3]; // !< [0x030-0x03b] Arguments/Parameters for device Configuration commands
uint32_t reserved2; // !< [0x03c-0x03f] Reserved for future use
uint32_t controllerMiscOption; // !< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more
// ! details
uint8_t deviceType; // !< [0x044-0x044] Device Type: See Flash Type Definition for more details
uint8_t sflashPadType; // !< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
uint8_t serialClkFreq; // !< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot
// ! Chapter for more details
uint8_t lutCustomSeqEnable; // !< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot
// ! be done using 1 LUT sequence, currently, only applicable to HyperFLASH
uint32_t reserved3[2]; // !< [0x048-0x04f] Reserved for future use
uint32_t sflashA1Size; // !< [0x050-0x053] Size of Flash connected to A1
uint32_t sflashA2Size; // !< [0x054-0x057] Size of Flash connected to A2
uint32_t sflashB1Size; // !< [0x058-0x05b] Size of Flash connected to B1
uint32_t sflashB2Size; // !< [0x05c-0x05f] Size of Flash connected to B2
uint32_t csPadSettingOverride; // !< [0x060-0x063] CS pad setting override value
uint32_t sclkPadSettingOverride; // !< [0x064-0x067] SCK pad setting override value
uint32_t dataPadSettingOverride; // !< [0x068-0x06b] data pad setting override value
uint32_t dqsPadSettingOverride; // !< [0x06c-0x06f] DQS pad setting override value
uint32_t timeoutInMs; // !< [0x070-0x073] Timeout threshold for read status command
uint32_t commandInterval; // !< [0x074-0x077] CS deselect interval between two commands
uint16_t dataValidTime[2]; // !< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
uint16_t busyOffset; // !< [0x07c-0x07d] Busy offset, valid value: 0-31
uint16_t busyBitPolarity; // !< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 -
// ! busy flag is 0 when flash device is busy
uint32_t lookupTable[64]; // !< [0x080-0x17f] Lookup table holds Flash command sequences
flexspi_lut_seq_t lutCustomSeq[12]; // !< [0x180-0x1af] Customizable LUT Sequences
uint32_t reserved4[4]; // !< [0x1b0-0x1bf] Reserved for future use
} flexspi_mem_config_t;
/* */
#define NOR_CMD_LUT_SEQ_IDX_READ_NORMAL 0
#define NOR_CMD_LUT_SEQ_IDX_READSTATUSREG 1
#define NOR_CMD_LUT_SEQ_IDX_READ_FAST_QUAD 2
#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE 3
#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI 4
#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5
#define NOR_CMD_LUT_SEQ_IDX_WRITESTATUSREG 6
#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM_QUAD 7
#define NOR_CMD_LUT_SEQ_IDX_READID 8
#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM 9
#define NOR_CMD_LUT_SEQ_IDX_ENTERQPI 10
#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11
#define NOR_CMD_LUT_SEQ_IDX_EXITQPI 12
#define HYPERFLASH_CMD_LUT_SEQ_IDX_READDATA 0
#define HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEDATA 1
#define HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS 2
#define HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE 4
#define HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR 6
#define HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM 10
#define HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP 12
/*
* Serial NOR configuration block
*/
typedef struct _flexspi_nor_config
{
flexspi_mem_config_t memConfig; // !< Common memory configuration info via FlexSPI
uint32_t pageSize; // !< Page size of Serial NOR
uint32_t sectorSize; // !< Sector size of Serial NOR
uint8_t ipcmdSerialClkFreq; // !< Clock frequency for IP command
uint8_t isUniformBlockSize; // !< Sector/Block size is the same
uint8_t reserved0[2]; // !< Reserved for future use
uint8_t serialNorType; // !< Serial NOR Flash type: 0/1/2/3
uint8_t needExitNoCmdMode; // !< Need to exit NoCmd mode before other IP command
uint8_t halfClkForNonReadCmd; // !< Half the Serial Clock for non-read command: true/false
uint8_t needRestoreNoCmdMode; // !< Need to Restore NoCmd mode after IP commmand execution
uint32_t blockSize; // !< Block size
uint32_t reserve2[11]; // !< Reserved for future use
} flexspi_nor_config_t;
#define FLASH_BUSY_STATUS_POL 0
#define FLASH_BUSY_STATUS_OFFSET 0
#ifdef __cplusplus
extern "C" {
#endif
#ifdef __cplusplus
}
#endif
#endif /* __EVKMIMXRT1064_FLEXSPI_NOR_CONFIG__ */

122
ports/mimxrt/boards/MIMXRT1064_EVK/clock_config.h Normal file
View File

@ -0,0 +1,122 @@
/*
* Copyright 2018-2019 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef _CLOCK_CONFIG_H_
#define _CLOCK_CONFIG_H_
#include "fsl_common.h"
/*******************************************************************************
* Definitions
******************************************************************************/
#define BOARD_XTAL0_CLK_HZ 24000000U /*!< Board xtal0 frequency in Hz */
#define BOARD_XTAL32K_CLK_HZ 32768U /*!< Board xtal32k frequency in Hz */
/*******************************************************************************
************************ BOARD_InitBootClocks function ************************
******************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif /* __cplusplus*/
/*!
* @brief This function executes default configuration of clocks.
*
*/
void BOARD_InitBootClocks(void);
#if defined(__cplusplus)
}
#endif /* __cplusplus*/
/*******************************************************************************
********************** Configuration BOARD_BootClockRUN ***********************
******************************************************************************/
/*******************************************************************************
* Definitions for BOARD_BootClockRUN configuration
******************************************************************************/
#define BOARD_BOOTCLOCKRUN_CORE_CLOCK 600000000U /*!< Core clock frequency: 600000000Hz */
/* Clock outputs (values are in Hz): */
#define BOARD_BOOTCLOCKRUN_AHB_CLK_ROOT 600000000UL
#define BOARD_BOOTCLOCKRUN_CAN_CLK_ROOT 40000000UL
#define BOARD_BOOTCLOCKRUN_CKIL_SYNC_CLK_ROOT 32768UL
#define BOARD_BOOTCLOCKRUN_CLKO1_CLK 0UL
#define BOARD_BOOTCLOCKRUN_CLKO2_CLK 0UL
#define BOARD_BOOTCLOCKRUN_CLK_1M 1000000UL
#define BOARD_BOOTCLOCKRUN_CLK_24M 24000000UL
#define BOARD_BOOTCLOCKRUN_CSI_CLK_ROOT 12000000UL
#define BOARD_BOOTCLOCKRUN_ENET1_TX_CLK 2400000UL
#define BOARD_BOOTCLOCKRUN_ENET2_125M_CLK 1200000UL
#define BOARD_BOOTCLOCKRUN_ENET2_TX_CLK 1200000UL
#define BOARD_BOOTCLOCKRUN_ENET_125M_CLK 2400000UL
#define BOARD_BOOTCLOCKRUN_ENET_25M_REF_CLK 1200000UL
#define BOARD_BOOTCLOCKRUN_FLEXIO1_CLK_ROOT 30000000UL
#define BOARD_BOOTCLOCKRUN_FLEXIO2_CLK_ROOT 30000000UL
#define BOARD_BOOTCLOCKRUN_FLEXSPI2_CLK_ROOT 130909090UL
#define BOARD_BOOTCLOCKRUN_FLEXSPI_CLK_ROOT 130909090UL
#define BOARD_BOOTCLOCKRUN_GPT1_IPG_CLK_HIGHFREQ 75000000UL
#define BOARD_BOOTCLOCKRUN_GPT2_IPG_CLK_HIGHFREQ 75000000UL
#define BOARD_BOOTCLOCKRUN_IPG_CLK_ROOT 150000000UL
#define BOARD_BOOTCLOCKRUN_LCDIF_CLK_ROOT 67500000UL
#define BOARD_BOOTCLOCKRUN_LPI2C_CLK_ROOT 60000000UL
#define BOARD_BOOTCLOCKRUN_LPSPI_CLK_ROOT 105600000UL
#define BOARD_BOOTCLOCKRUN_LVDS1_CLK 1200000000UL
#define BOARD_BOOTCLOCKRUN_MQS_MCLK 63529411UL
#define BOARD_BOOTCLOCKRUN_PERCLK_CLK_ROOT 75000000UL
#define BOARD_BOOTCLOCKRUN_PLL7_MAIN_CLK 24000000UL
#define BOARD_BOOTCLOCKRUN_SAI1_CLK_ROOT 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI1_MCLK1 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI1_MCLK2 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI1_MCLK3 30000000UL
#define BOARD_BOOTCLOCKRUN_SAI2_CLK_ROOT 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI2_MCLK1 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI2_MCLK2 0UL
#define BOARD_BOOTCLOCKRUN_SAI2_MCLK3 30000000UL
#define BOARD_BOOTCLOCKRUN_SAI3_CLK_ROOT 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI3_MCLK1 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI3_MCLK2 0UL
#define BOARD_BOOTCLOCKRUN_SAI3_MCLK3 30000000UL
#define BOARD_BOOTCLOCKRUN_SEMC_CLK_ROOT 75000000UL
#define BOARD_BOOTCLOCKRUN_SPDIF0_CLK_ROOT 30000000UL
#define BOARD_BOOTCLOCKRUN_SPDIF0_EXTCLK_OUT 0UL
#define BOARD_BOOTCLOCKRUN_TRACE_CLK_ROOT 117333333UL
#define BOARD_BOOTCLOCKRUN_UART_CLK_ROOT 80000000UL
#define BOARD_BOOTCLOCKRUN_USBPHY1_CLK 0UL
#define BOARD_BOOTCLOCKRUN_USBPHY2_CLK 0UL
#define BOARD_BOOTCLOCKRUN_USDHC1_CLK_ROOT 198000000UL
#define BOARD_BOOTCLOCKRUN_USDHC2_CLK_ROOT 198000000UL
/*! @brief Arm PLL set for BOARD_BootClockRUN configuration.
*/
extern const clock_arm_pll_config_t armPllConfig_BOARD_BootClockRUN;
/*! @brief Usb1 PLL set for BOARD_BootClockRUN configuration.
*/
extern const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN;
/*! @brief Sys PLL for BOARD_BootClockRUN configuration.
*/
extern const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN;
/*******************************************************************************
* API for BOARD_BootClockRUN configuration
******************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif /* __cplusplus*/
/*!
* @brief This function executes configuration of clocks.
*
*/
void BOARD_BootClockRUN(void);
#if defined(__cplusplus)
}
#endif /* __cplusplus*/
#endif /* _CLOCK_CONFIG_H_ */

264
ports/mimxrt/boards/MIMXRT1064_EVK/evkmimxrt1064_flexspi_nor_config.h
View File

@ -1,264 +0,0 @@
/*
* Copyright 2018 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef __EVKMIMXRT1064_FLEXSPI_NOR_CONFIG__
#define __EVKMIMXRT1064_FLEXSPI_NOR_CONFIG__
#include <stdint.h>
#include <stdbool.h>
#include "fsl_flexspi.h"
/*! @name Driver version */
/*@{*/
/*! @brief XIP_BOARD driver version 2.0.0. */
#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0))
/*@}*/
/* FLEXSPI memory config block related defintions */
#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian
#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0
#define FLEXSPI_CFG_BLK_SIZE (512)
/* FLEXSPI Feature related definitions */
#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1
/* Lookup table related defintions */
#define CMD_INDEX_READ 0
#define CMD_INDEX_READSTATUS 1
#define CMD_INDEX_WRITEENABLE 2
#define CMD_INDEX_WRITE 4
#define CMD_LUT_SEQ_IDX_READ 0
#define CMD_LUT_SEQ_IDX_READSTATUS 1
#define CMD_LUT_SEQ_IDX_WRITEENABLE 3
#define CMD_LUT_SEQ_IDX_WRITE 9
#define CMD_SDR 0x01
#define CMD_DDR 0x21
#define RADDR_SDR 0x02
#define RADDR_DDR 0x22
#define CADDR_SDR 0x03
#define CADDR_DDR 0x23
#define MODE1_SDR 0x04
#define MODE1_DDR 0x24
#define MODE2_SDR 0x05
#define MODE2_DDR 0x25
#define MODE4_SDR 0x06
#define MODE4_DDR 0x26
#define MODE8_SDR 0x07
#define MODE8_DDR 0x27
#define WRITE_SDR 0x08
#define WRITE_DDR 0x28
#define READ_SDR 0x09
#define READ_DDR 0x29
#define LEARN_SDR 0x0A
#define LEARN_DDR 0x2A
#define DATSZ_SDR 0x0B
#define DATSZ_DDR 0x2B
#define DUMMY_SDR 0x0C
#define DUMMY_DDR 0x2C
#define DUMMY_RWDS_SDR 0x0D
#define DUMMY_RWDS_DDR 0x2D
#define JMP_ON_CS 0x1F
#define STOP 0
#define FLEXSPI_1PAD 0
#define FLEXSPI_2PAD 1
#define FLEXSPI_4PAD 2
#define FLEXSPI_8PAD 3
#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \
(FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \
FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1))
//!@brief Definitions for FlexSPI Serial Clock Frequency
typedef enum _FlexSpiSerialClockFreq
{
kFlexSpiSerialClk_30MHz = 1,
kFlexSpiSerialClk_50MHz = 2,
kFlexSpiSerialClk_60MHz = 3,
kFlexSpiSerialClk_75MHz = 4,
kFlexSpiSerialClk_80MHz = 5,
kFlexSpiSerialClk_100MHz = 6,
kFlexSpiSerialClk_120MHz = 7,
kFlexSpiSerialClk_133MHz = 8,
kFlexSpiSerialClk_166MHz = 9,
} flexspi_serial_clk_freq_t;
//!@brief FlexSPI clock configuration type
enum
{
kFlexSpiClk_SDR, //!< Clock configure for SDR mode
kFlexSpiClk_DDR, //!< Clock configurat for DDR mode
};
//!@brief FlexSPI Read Sample Clock Source definition
typedef enum _FlashReadSampleClkSource
{
kFlexSPIReadSampleClk_LoopbackInternally = 0,
kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1,
kFlexSPIReadSampleClk_LoopbackFromSckPad = 2,
kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3,
} flexspi_read_sample_clk_t;
//!@brief Misc feature bit definitions
enum
{
kFlexSpiMiscOffset_DiffClkEnable = 0, //!< Bit for Differential clock enable
kFlexSpiMiscOffset_Ck2Enable = 1, //!< Bit for CK2 enable
kFlexSpiMiscOffset_ParallelEnable = 2, //!< Bit for Parallel mode enable
kFlexSpiMiscOffset_WordAddressableEnable = 3, //!< Bit for Word Addressable enable
kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, //!< Bit for Safe Configuration Frequency enable
kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, //!< Bit for Pad setting override enable
kFlexSpiMiscOffset_DdrModeEnable = 6, //!< Bit for DDR clock confiuration indication.
};
//!@brief Flash Type Definition
enum
{
kFlexSpiDeviceType_SerialNOR = 1, //!< Flash devices are Serial NOR
kFlexSpiDeviceType_SerialNAND = 2, //!< Flash devices are Serial NAND
kFlexSpiDeviceType_SerialRAM = 3, //!< Flash devices are Serial RAM/HyperFLASH
kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND
kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, //!< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs
};
//!@brief Flash Pad Definitions
enum
{
kSerialFlash_1Pad = 1,
kSerialFlash_2Pads = 2,
kSerialFlash_4Pads = 4,
kSerialFlash_8Pads = 8,
};
//!@brief FlexSPI LUT Sequence structure
typedef struct _lut_sequence
{
uint8_t seqNum; //!< Sequence Number, valid number: 1-16
uint8_t seqId; //!< Sequence Index, valid number: 0-15
uint16_t reserved;
} flexspi_lut_seq_t;
//!@brief Flash Configuration Command Type
enum
{
kDeviceConfigCmdType_Generic, //!< Generic command, for example: configure dummy cycles, drive strength, etc
kDeviceConfigCmdType_QuadEnable, //!< Quad Enable command
kDeviceConfigCmdType_Spi2Xpi, //!< Switch from SPI to DPI/QPI/OPI mode
kDeviceConfigCmdType_Xpi2Spi, //!< Switch from DPI/QPI/OPI to SPI mode
kDeviceConfigCmdType_Spi2NoCmd, //!< Switch to 0-4-4/0-8-8 mode
kDeviceConfigCmdType_Reset, //!< Reset device command
};
//!@brief FlexSPI Memory Configuration Block
typedef struct _FlexSPIConfig
{
uint32_t tag; //!< [0x000-0x003] Tag, fixed value 0x42464346UL
uint32_t version; //!< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
uint32_t reserved0; //!< [0x008-0x00b] Reserved for future use
uint8_t readSampleClkSrc; //!< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
uint8_t csHoldTime; //!< [0x00d-0x00d] CS hold time, default value: 3
uint8_t csSetupTime; //!< [0x00e-0x00e] CS setup time, default value: 3
uint8_t columnAddressWidth; //!< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For
//! Serial NAND, need to refer to datasheet
uint8_t deviceModeCfgEnable; //!< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
uint8_t deviceModeType; //!< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch,
//! Generic configuration, etc.
uint16_t waitTimeCfgCommands; //!< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for
//! DPI/QPI/OPI switch or reset command
flexspi_lut_seq_t deviceModeSeq; //!< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt
//! sequence number, [31:16] Reserved
uint32_t deviceModeArg; //!< [0x018-0x01b] Argument/Parameter for device configuration
uint8_t configCmdEnable; //!< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
uint8_t configModeType[3]; //!< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
flexspi_lut_seq_t
configCmdSeqs[3]; //!< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
uint32_t reserved1; //!< [0x02c-0x02f] Reserved for future use
uint32_t configCmdArgs[3]; //!< [0x030-0x03b] Arguments/Parameters for device Configuration commands
uint32_t reserved2; //!< [0x03c-0x03f] Reserved for future use
uint32_t controllerMiscOption; //!< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more
//! details
uint8_t deviceType; //!< [0x044-0x044] Device Type: See Flash Type Definition for more details
uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot
//! Chapter for more details
uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot
//! be done using 1 LUT sequence, currently, only applicable to HyperFLASH
uint32_t reserved3[2]; //!< [0x048-0x04f] Reserved for future use
uint32_t sflashA1Size; //!< [0x050-0x053] Size of Flash connected to A1
uint32_t sflashA2Size; //!< [0x054-0x057] Size of Flash connected to A2
uint32_t sflashB1Size; //!< [0x058-0x05b] Size of Flash connected to B1
uint32_t sflashB2Size; //!< [0x05c-0x05f] Size of Flash connected to B2
uint32_t csPadSettingOverride; //!< [0x060-0x063] CS pad setting override value
uint32_t sclkPadSettingOverride; //!< [0x064-0x067] SCK pad setting override value
uint32_t dataPadSettingOverride; //!< [0x068-0x06b] data pad setting override value
uint32_t dqsPadSettingOverride; //!< [0x06c-0x06f] DQS pad setting override value
uint32_t timeoutInMs; //!< [0x070-0x073] Timeout threshold for read status command
uint32_t commandInterval; //!< [0x074-0x077] CS deselect interval between two commands
uint16_t dataValidTime[2]; //!< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
uint16_t busyOffset; //!< [0x07c-0x07d] Busy offset, valid value: 0-31
uint16_t busyBitPolarity; //!< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 -
//! busy flag is 0 when flash device is busy
uint32_t lookupTable[64]; //!< [0x080-0x17f] Lookup table holds Flash command sequences
flexspi_lut_seq_t lutCustomSeq[12]; //!< [0x180-0x1af] Customizable LUT Sequences
uint32_t reserved4[4]; //!< [0x1b0-0x1bf] Reserved for future use
} flexspi_mem_config_t;
/* */
#define NOR_CMD_LUT_SEQ_IDX_READ_NORMAL 0
#define NOR_CMD_LUT_SEQ_IDX_READSTATUSREG 1
#define NOR_CMD_LUT_SEQ_IDX_READ_FAST_QUAD 2
#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE 3
#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI 4
#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5
#define NOR_CMD_LUT_SEQ_IDX_WRITESTATUSREG 6
#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM_QUAD 7
#define NOR_CMD_LUT_SEQ_IDX_READID 8
#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM 9
#define NOR_CMD_LUT_SEQ_IDX_ENTERQPI 10
#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11
#define NOR_CMD_LUT_SEQ_IDX_EXITQPI 12
#define HYPERFLASH_CMD_LUT_SEQ_IDX_READDATA 0
#define HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEDATA 1
#define HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS 2
#define HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE 4
#define HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR 6
#define HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM 10
#define HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP 12
/*
* Serial NOR configuration block
*/
typedef struct _flexspi_nor_config
{
flexspi_mem_config_t memConfig; //!< Common memory configuration info via FlexSPI
uint32_t pageSize; //!< Page size of Serial NOR
uint32_t sectorSize; //!< Sector size of Serial NOR
uint8_t ipcmdSerialClkFreq; //!< Clock frequency for IP command
uint8_t isUniformBlockSize; //!< Sector/Block size is the same
uint8_t reserved0[2]; //!< Reserved for future use
uint8_t serialNorType; //!< Serial NOR Flash type: 0/1/2/3
uint8_t needExitNoCmdMode; //!< Need to exit NoCmd mode before other IP command
uint8_t halfClkForNonReadCmd; //!< Half the Serial Clock for non-read command: true/false
uint8_t needRestoreNoCmdMode; //!< Need to Restore NoCmd mode after IP commmand execution
uint32_t blockSize; //!< Block size
uint32_t reserve2[11]; //!< Reserved for future use
} flexspi_nor_config_t;
#define FLASH_BUSY_STATUS_POL 0
#define FLASH_BUSY_STATUS_OFFSET 0
#ifdef __cplusplus
extern "C" {
#endif
#ifdef __cplusplus
}
#endif
#endif /* __EVKMIMXRT1064_FLEXSPI_NOR_CONFIG__ */

186
ports/mimxrt/boards/MIMXRT1064_EVK/flash_config.c
View File

@ -1,186 +0,0 @@
/*
* Copyright 2018 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include "evkmimxrt1064_flexspi_nor_config.h"
/* Component ID definition, used by tools. */
#ifndef FSL_COMPONENT_ID
#define FSL_COMPONENT_ID "platform.drivers.xip_board"
#endif
/*******************************************************************************
* Code
******************************************************************************/
#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1)
#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__)
__attribute__((section(".boot_hdr.conf")))
#elif defined(__ICCARM__)
#pragma location = ".boot_hdr.conf"
#endif
const flexspi_nor_config_t qspiflash_config = {
.memConfig =
{
.tag = FLEXSPI_CFG_BLK_TAG,
.version = FLEXSPI_CFG_BLK_VERSION,
.readSampleClkSrc = kFlexSPIReadSampleClk_ExternalInputFromDqsPad,
.csHoldTime = 3u,
.csSetupTime = 3u,
.columnAddressWidth = 3u,
// Enable DDR mode, Wordaddressable, Safe configuration, Differential clock
.controllerMiscOption =
(1u << kFlexSpiMiscOffset_DdrModeEnable) | (1u << kFlexSpiMiscOffset_WordAddressableEnable) |
(1u << kFlexSpiMiscOffset_SafeConfigFreqEnable) | (1u << kFlexSpiMiscOffset_DiffClkEnable),
.sflashPadType = kSerialFlash_8Pads,
.serialClkFreq = kFlexSpiSerialClk_133MHz,
.sflashA1Size = 64u * 1024u * 1024u,
.dataValidTime = {16u, 16u},
.lookupTable =
{
/* 0 Read Data */
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READDATA] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xA0, kFLEXSPI_Command_RADDR_DDR, kFLEXSPI_8PAD, 0x18),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READDATA + 1] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_CADDR_DDR, kFLEXSPI_8PAD, 0x10, kFLEXSPI_Command_READ_DDR, kFLEXSPI_8PAD, 0x04),
/* 1 Write Data */
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEDATA] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x20, kFLEXSPI_Command_RADDR_DDR, kFLEXSPI_8PAD, 0x18),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEDATA + 1] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_CADDR_DDR, kFLEXSPI_8PAD, 0x10, kFLEXSPI_Command_WRITE_DDR, kFLEXSPI_8PAD, 0x02),
/* 2 Read Status */
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS + 1] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA), // ADDR 0x555
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS + 2] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS + 3] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x70), // DATA 0x70
// +1
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS + 4] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xA0, kFLEXSPI_Command_RADDR_DDR, kFLEXSPI_8PAD, 0x18),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS + 5] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_CADDR_DDR, kFLEXSPI_8PAD, 0x10, kFLEXSPI_Command_DUMMY_RWDS_DDR, kFLEXSPI_8PAD, 0x0B),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS + 6] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_READ_DDR, kFLEXSPI_8PAD, 0x04, kFLEXSPI_Command_STOP, kFLEXSPI_1PAD, 0x0),
/* 4 Write Enable */
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x20, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE + 1] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA), // ADDR 0x555
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE + 2] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE + 3] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA), // DATA 0xAA
// +1
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE + 4] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x20, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE + 5] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x55),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE + 6] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x02),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE + 7] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x55),
/* 6 Erase Sector */
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 1] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA), // ADDR 0x555
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 2] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 3] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x80), // DATA 0x80
// +1
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 4] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 5] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 6] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 7] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA), // ADDR 0x555
// +2
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 8] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 9] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x55),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 10] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x02),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 11] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x55),
// +3
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 12] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_RADDR_DDR, kFLEXSPI_8PAD, 0x18),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 13] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_CADDR_DDR, kFLEXSPI_8PAD, 0x10, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 14] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x30, kFLEXSPI_Command_STOP, kFLEXSPI_1PAD, 0x00),
/* 10 program page with word program command sequence */
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x20, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM + 1] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA), // ADDR 0x555
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM + 2] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM + 3] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xA0), // DATA 0xA0
// +1
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM + 4] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x20, kFLEXSPI_Command_RADDR_DDR, kFLEXSPI_8PAD, 0x18),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM + 5] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_CADDR_DDR, kFLEXSPI_8PAD, 0x10, kFLEXSPI_Command_WRITE_DDR, kFLEXSPI_8PAD, 0x80),
/* 12 Erase chip */
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 1] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 2] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 3] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x80),
// +1
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 4] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 5] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 6] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 7] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA),
// +2
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 8] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 9] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x55),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 10] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x02),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 11] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x55),
// +3
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 12] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 13] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 14] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 15] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x10),
},
},
.pageSize = 512u,
.sectorSize = 256u * 1024u,
.blockSize = 256u * 1024u,
.isUniformBlockSize = true,
};
#endif /* XIP_BOOT_HEADER_ENABLE */

16
ports/mimxrt/boards/MIMXRT1064_EVK/mpconfigboard.h
View File

@ -5,8 +5,6 @@
#define MICROPY_HW_LED1_PIN (pin_GPIO_AD_B0_09)
#define MICROPY_HW_LED_ON(pin) (mp_hal_pin_low(pin))
#define MICROPY_HW_LED_OFF(pin) (mp_hal_pin_high(pin))
#define BOARD_FLASH_CONFIG_HEADER_H "evkmimxrt1064_flexspi_nor_config.h"
#define BOARD_FLASH_OPS_HEADER_H "hal/flexspi_hyper_flash.h"
#define MICROPY_HW_NUM_PIN_IRQS (4 * 32 + 3)
@ -36,10 +34,10 @@
{ IOMUXC_GPIO_SD_B0_02_LPSPI1_SDO }, { IOMUXC_GPIO_SD_B0_03_LPSPI1_SDI },
#define DMA_REQ_SRC_RX { 0, kDmaRequestMuxLPSPI1Rx, kDmaRequestMuxLPSPI2Rx, \
kDmaRequestMuxLPSPI3Rx, kDmaRequestMuxLPSPI4Rx }
kDmaRequestMuxLPSPI3Rx, kDmaRequestMuxLPSPI4Rx }
#define DMA_REQ_SRC_TX { 0, kDmaRequestMuxLPSPI1Tx, kDmaRequestMuxLPSPI2Tx, \
kDmaRequestMuxLPSPI3Tx, kDmaRequestMuxLPSPI4Tx }
kDmaRequestMuxLPSPI3Tx, kDmaRequestMuxLPSPI4Tx }
// Define the mapping hardware I2C # to logical I2C #
// SDA/SCL HW-I2C Logical I2C
@ -58,9 +56,9 @@
{ \
.cmd = {GPIO_SD_B0_00_USDHC1_CMD}, \
.clk = { GPIO_SD_B0_01_USDHC1_CLK }, \
.cd_b = { GPIO_B1_12_USDHC1_CD_B },\
.data0 = { GPIO_SD_B0_02_USDHC1_DATA0 },\
.data1 = { GPIO_SD_B0_03_USDHC1_DATA1 },\
.data2 = { GPIO_SD_B0_04_USDHC1_DATA2 },\
.data3 = { GPIO_SD_B0_05_USDHC1_DATA3 },\
.cd_b = { GPIO_B1_12_USDHC1_CD_B }, \
.data0 = { GPIO_SD_B0_02_USDHC1_DATA0 }, \
.data1 = { GPIO_SD_B0_03_USDHC1_DATA1 }, \
.data2 = { GPIO_SD_B0_04_USDHC1_DATA2 }, \
.data3 = { GPIO_SD_B0_05_USDHC1_DATA3 }, \
}

7
ports/mimxrt/boards/MIMXRT1064_EVK/mpconfigboard.mk
View File

@ -3,13 +3,10 @@ MCU_VARIANT = MIMXRT1064DVL6A
MICROPY_FLOAT_IMPL = double
MICROPY_PY_MACHINE_SDCARD = 1
BOARD_FLASH_TYPE ?= hyperflash
BOARD_FLASH_SIZE ?= 0x4000000 # 64MB
JLINK_PATH ?= /media/RT1064-EVK/
CFLAGS += -DBOARD_FLASH_SIZE=0x400000
deploy: $(BUILD)/firmware.bin
cp $< $(JLINK_PATH)
SRC_C += \
hal/flexspi_hyper_flash.c

186
ports/mimxrt/boards/MIMXRT1064_EVK/qspi_hyper_flash_config.c Normal file
View File

@ -0,0 +1,186 @@
/*
* Copyright 2018 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include BOARD_FLASH_CONFIG_HEADER_H
/* Component ID definition, used by tools. */
#ifndef FSL_COMPONENT_ID
#define FSL_COMPONENT_ID "platform.drivers.xip_board"
#endif
/*******************************************************************************
* Code
******************************************************************************/
#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1)
#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__)
__attribute__((section(".boot_hdr.conf")))
#elif defined(__ICCARM__)
#pragma location = ".boot_hdr.conf"
#endif
const flexspi_nor_config_t qspiflash_config = {
.memConfig =
{
.tag = FLEXSPI_CFG_BLK_TAG,
.version = FLEXSPI_CFG_BLK_VERSION,
.readSampleClkSrc = kFlexSPIReadSampleClk_ExternalInputFromDqsPad,
.csHoldTime = 3u,
.csSetupTime = 3u,
.columnAddressWidth = 3u,
// Enable DDR mode, Wordaddressable, Safe configuration, Differential clock
.controllerMiscOption =
(1u << kFlexSpiMiscOffset_DdrModeEnable) | (1u << kFlexSpiMiscOffset_WordAddressableEnable) |
(1u << kFlexSpiMiscOffset_SafeConfigFreqEnable) | (1u << kFlexSpiMiscOffset_DiffClkEnable),
.sflashPadType = kSerialFlash_8Pads,
.serialClkFreq = kFlexSpiSerialClk_133MHz,
.sflashA1Size = BOARD_FLASH_SIZE,
.dataValidTime = {16u, 16u},
.lookupTable =
{
/* 0 Read Data */
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READDATA] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xA0, kFLEXSPI_Command_RADDR_DDR, kFLEXSPI_8PAD, 0x18),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READDATA + 1] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_CADDR_DDR, kFLEXSPI_8PAD, 0x10, kFLEXSPI_Command_READ_DDR, kFLEXSPI_8PAD, 0x04),
/* 1 Write Data */
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEDATA] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x20, kFLEXSPI_Command_RADDR_DDR, kFLEXSPI_8PAD, 0x18),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEDATA + 1] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_CADDR_DDR, kFLEXSPI_8PAD, 0x10, kFLEXSPI_Command_WRITE_DDR, kFLEXSPI_8PAD, 0x02),
/* 2 Read Status */
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS + 1] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA), // ADDR 0x555
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS + 2] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS + 3] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x70), // DATA 0x70
// +1
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS + 4] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xA0, kFLEXSPI_Command_RADDR_DDR, kFLEXSPI_8PAD, 0x18),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS + 5] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_CADDR_DDR, kFLEXSPI_8PAD, 0x10, kFLEXSPI_Command_DUMMY_RWDS_DDR, kFLEXSPI_8PAD, 0x0B),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS + 6] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_READ_DDR, kFLEXSPI_8PAD, 0x04, kFLEXSPI_Command_STOP, kFLEXSPI_1PAD, 0x0),
/* 4 Write Enable */
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x20, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE + 1] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA), // ADDR 0x555
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE + 2] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE + 3] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA), // DATA 0xAA
// +1
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE + 4] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x20, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE + 5] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x55),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE + 6] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x02),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE + 7] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x55),
/* 6 Erase Sector */
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 1] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA), // ADDR 0x555
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 2] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 3] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x80), // DATA 0x80
// +1
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 4] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 5] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 6] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 7] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA), // ADDR 0x555
// +2
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 8] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 9] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x55),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 10] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x02),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 11] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x55),
// +3
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 12] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_RADDR_DDR, kFLEXSPI_8PAD, 0x18),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 13] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_CADDR_DDR, kFLEXSPI_8PAD, 0x10, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR + 14] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x30, kFLEXSPI_Command_STOP, kFLEXSPI_1PAD, 0x00),
/* 10 program page with word program command sequence */
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x20, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM + 1] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA), // ADDR 0x555
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM + 2] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM + 3] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xA0), // DATA 0xA0
// +1
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM + 4] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x20, kFLEXSPI_Command_RADDR_DDR, kFLEXSPI_8PAD, 0x18),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM + 5] = FLEXSPI_LUT_SEQ(
kFLEXSPI_Command_CADDR_DDR, kFLEXSPI_8PAD, 0x10, kFLEXSPI_Command_WRITE_DDR, kFLEXSPI_8PAD, 0x80),
/* 12 Erase chip */
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 1] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 2] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 3] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x80),
// +1
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 4] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 5] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 6] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 7] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA),
// +2
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 8] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 9] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x55),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 10] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x02),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 11] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x55),
// +3
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 12] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 13] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0xAA),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 14] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x05),
[4 * HYPERFLASH_CMD_LUT_SEQ_IDX_ERASECHIP + 15] =
FLEXSPI_LUT_SEQ(kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x00, kFLEXSPI_Command_DDR, kFLEXSPI_8PAD, 0x10),
},
},
.pageSize = 512u,
.sectorSize = 256u * 1024u,
.blockSize = 256u * 1024u,
.isUniformBlockSize = true,
};
#endif /* XIP_BOOT_HEADER_ENABLE */

129
ports/mimxrt/boards/MIMXRT1064_EVK/qspi_nor_flash_config.c Normal file
View File

@ -0,0 +1,129 @@
/*
* Copyright 2018 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include BOARD_FLASH_CONFIG_HEADER_H
/* Component ID definition, used by tools. */
#ifndef FSL_COMPONENT_ID
#define FSL_COMPONENT_ID "platform.drivers.xip_board"
#endif
/*******************************************************************************
* Code
******************************************************************************/
#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1)
#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__)
__attribute__((section(".boot_hdr.conf")))
#elif defined(__ICCARM__)
#pragma location = ".boot_hdr.conf"
#endif
const flexspi_nor_config_t qspiflash_config = {
.memConfig =
{
.tag = FLEXSPI_CFG_BLK_TAG,
.version = FLEXSPI_CFG_BLK_VERSION,
.readSampleClkSrc = kFlexSPIReadSampleClk_ExternalInputFromDqsPad,
.csHoldTime = 3u,
.csSetupTime = 3u,
.columnAddressWidth = 3u,
// Enable DDR mode, Wordaddassable, Safe configuration, Differential clock
.controllerMiscOption =
(1u << kFlexSpiMiscOffset_DdrModeEnable) | (1u << kFlexSpiMiscOffset_WordAddressableEnable) |
(1u << kFlexSpiMiscOffset_SafeConfigFreqEnable) | (1u << kFlexSpiMiscOffset_DiffClkEnable),
.sflashPadType = kSerialFlash_8Pads,
.serialClkFreq = kFlexSpiSerialClk_133MHz,
.sflashA1Size = BOARD_FLASH_SIZE,
.dataValidTime = {16u, 16u},
.lookupTable =
{
// 0 Read LUTs 0 -> 0
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18),
FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 1 Read status register -> 1
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x05, READ_SDR, FLEXSPI_1PAD, 0x01),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 2 Fast read quad mode - SDR
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x6B, RADDR_SDR, FLEXSPI_1PAD, 0x18),
FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x08, READ_SDR, FLEXSPI_4PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 3 Write Enable -> 3
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x06, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 4 Read extend parameters
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x81, READ_SDR, FLEXSPI_1PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 5 Erase Sector -> 5
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x20, RADDR_SDR, FLEXSPI_1PAD, 24),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 6 Write Status Reg
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x01, WRITE_SDR, FLEXSPI_1PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 7 Page Program - quad mode (-> 9)
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x32, RADDR_SDR, FLEXSPI_1PAD, 0x18),
FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_4PAD, 0x04, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 8 Read ID
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x90, DUMMY_SDR, FLEXSPI_1PAD, 24),
FLEXSPI_LUT_SEQ(READ_SDR, FLEXSPI_1PAD, 0x00, 0, 0, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 9 Page Program - single mode -> 9
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x02, RADDR_SDR, FLEXSPI_1PAD, 24),
FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0, 0, 0, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 10 Enter QPI mode
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x35, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 11 Erase Chip
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x60, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 12 Exit QPI mode
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_4PAD, 0xF5, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
},
},
.pageSize = 512u,
.sectorSize = 256u * 1024u,
.blockSize = 256u * 1024u,
.isUniformBlockSize = true,
};
#endif /* XIP_BOOT_HEADER_ENABLE */

2
ports/mimxrt/boards/TEENSY40/TEENSY40.ld
View File

@ -1,2 +0,0 @@
flash_size = 2M;
reserved_size = 4K;

259
ports/mimxrt/boards/TEENSY40/TEENSY40_flexspi_nor_config.h Normal file
View File

@ -0,0 +1,259 @@
/*
* Copyright 2018 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
// Based on tinyusb/hw/bsp/teensy_40/teensy40_flexspi_nor_config.h
#ifndef __TEENSY40_FLEXSPI_NOR_CONFIG__
#define __TEENSY40_FLEXSPI_NOR_CONFIG__
#include <stdint.h>
#include <stdbool.h>
#include "fsl_common.h"
/*! @name Driver version */
/*@{*/
/*! @brief XIP_BOARD driver version 2.0.0. */
#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0))
/*@}*/
/* FLEXSPI memory config block related defintions */
#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian
#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0
#define FLEXSPI_CFG_BLK_SIZE (512)
/* FLEXSPI Feature related definitions */
#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1
/* Lookup table related definitions */
#define CMD_INDEX_READ 0
#define CMD_INDEX_READSTATUS 1
#define CMD_INDEX_WRITEENABLE 2
#define CMD_INDEX_WRITE 4
#define CMD_LUT_SEQ_IDX_READ 0
#define CMD_LUT_SEQ_IDX_READSTATUS 1
#define CMD_LUT_SEQ_IDX_WRITEENABLE 3
#define CMD_LUT_SEQ_IDX_ERASE 5
#define CMD_LUT_SEQ_IDX_WRITE 9
#define CMD_SDR 0x01
#define CMD_DDR 0x21
#define RADDR_SDR 0x02
#define RADDR_DDR 0x22
#define CADDR_SDR 0x03
#define CADDR_DDR 0x23
#define MODE1_SDR 0x04
#define MODE1_DDR 0x24
#define MODE2_SDR 0x05
#define MODE2_DDR 0x25
#define MODE4_SDR 0x06
#define MODE4_DDR 0x26
#define MODE8_SDR 0x07
#define MODE8_DDR 0x27
#define WRITE_SDR 0x08
#define WRITE_DDR 0x28
#define READ_SDR 0x09
#define READ_DDR 0x29
#define LEARN_SDR 0x0A
#define LEARN_DDR 0x2A
#define DATSZ_SDR 0x0B
#define DATSZ_DDR 0x2B
#define DUMMY_SDR 0x0C
#define DUMMY_DDR 0x2C
#define DUMMY_RWDS_SDR 0x0D
#define DUMMY_RWDS_DDR 0x2D
#define JMP_ON_CS 0x1F
#define STOP 0
#define FLEXSPI_1PAD 0
#define FLEXSPI_2PAD 1
#define FLEXSPI_4PAD 2
#define FLEXSPI_8PAD 3
#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \
(FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \
FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1))
// !@brief Definitions for FlexSPI Serial Clock Frequency
typedef enum _FlexSpiSerialClockFreq
{
kFlexSpiSerialClk_30MHz = 1,
kFlexSpiSerialClk_50MHz = 2,
kFlexSpiSerialClk_60MHz = 3,
kFlexSpiSerialClk_75MHz = 4,
kFlexSpiSerialClk_80MHz = 5,
kFlexSpiSerialClk_100MHz = 6,
kFlexSpiSerialClk_120MHz = 7,
kFlexSpiSerialClk_133MHz = 8,
kFlexSpiSerialClk_166MHz = 9,
} flexspi_serial_clk_freq_t;
// !@brief FlexSPI clock configuration type
enum
{
kFlexSpiClk_SDR, // !< Clock configure for SDR mode
kFlexSpiClk_DDR, // !< Clock configurat for DDR mode
};
// !@brief FlexSPI Read Sample Clock Source definition
typedef enum _FlashReadSampleClkSource
{
kFlexSPIReadSampleClk_LoopbackInternally = 0,
kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1,
kFlexSPIReadSampleClk_LoopbackFromSckPad = 2,
kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3,
} flexspi_read_sample_clk_t;
// !@brief Misc feature bit definitions
enum
{
kFlexSpiMiscOffset_DiffClkEnable = 0, // !< Bit for Differential clock enable
kFlexSpiMiscOffset_Ck2Enable = 1, // !< Bit for CK2 enable
kFlexSpiMiscOffset_ParallelEnable = 2, // !< Bit for Parallel mode enable
kFlexSpiMiscOffset_WordAddressableEnable = 3, // !< Bit for Word Addressable enable
kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, // !< Bit for Safe Configuration Frequency enable
kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, // !< Bit for Pad setting override enable
kFlexSpiMiscOffset_DdrModeEnable = 6, // !< Bit for DDR clock confiuration indication.
};
// !@brief Flash Type Definition
enum
{
kFlexSpiDeviceType_SerialNOR = 1, // !< Flash devices are Serial NOR
kFlexSpiDeviceType_SerialNAND = 2, // !< Flash devices are Serial NAND
kFlexSpiDeviceType_SerialRAM = 3, // !< Flash devices are Serial RAM/HyperFLASH
kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, // !< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND
kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, // !< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs
};
// !@brief Flash Pad Definitions
enum
{
kSerialFlash_1Pad = 1,
kSerialFlash_2Pads = 2,
kSerialFlash_4Pads = 4,
kSerialFlash_8Pads = 8,
};
// !@brief FlexSPI LUT Sequence structure
typedef struct _lut_sequence
{
uint8_t seqNum; // !< Sequence Number, valid number: 1-16
uint8_t seqId; // !< Sequence Index, valid number: 0-15
uint16_t reserved;
} flexspi_lut_seq_t;
// !@brief Flash Configuration Command Type
enum
{
kDeviceConfigCmdType_Generic, // !< Generic command, for example: configure dummy cycles, drive strength, etc
kDeviceConfigCmdType_QuadEnable, // !< Quad Enable command
kDeviceConfigCmdType_Spi2Xpi, // !< Switch from SPI to DPI/QPI/OPI mode
kDeviceConfigCmdType_Xpi2Spi, // !< Switch from DPI/QPI/OPI to SPI mode
kDeviceConfigCmdType_Spi2NoCmd, // !< Switch to 0-4-4/0-8-8 mode
kDeviceConfigCmdType_Reset, // !< Reset device command
};
// !@brief FlexSPI Memory Configuration Block
typedef struct _FlexSPIConfig
{
uint32_t tag; // !< [0x000-0x003] Tag, fixed value 0x42464346UL
uint32_t version; // !< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
uint32_t reserved0; // !< [0x008-0x00b] Reserved for future use
uint8_t readSampleClkSrc; // !< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
uint8_t csHoldTime; // !< [0x00d-0x00d] CS hold time, default value: 3
uint8_t csSetupTime; // !< [0x00e-0x00e] CS setup time, default value: 3
uint8_t columnAddressWidth; // !< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For
// ! Serial NAND, need to refer to datasheet
uint8_t deviceModeCfgEnable; // !< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
uint8_t deviceModeType; // !< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch,
// ! Generic configuration, etc.
uint16_t waitTimeCfgCommands; // !< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for
// ! DPI/QPI/OPI switch or reset command
flexspi_lut_seq_t deviceModeSeq; // !< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt
// ! sequence number, [31:16] Reserved
uint32_t deviceModeArg; // !< [0x018-0x01b] Argument/Parameter for device configuration
uint8_t configCmdEnable; // !< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
uint8_t configModeType[3]; // !< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
flexspi_lut_seq_t
configCmdSeqs[3]; // !< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
uint32_t reserved1; // !< [0x02c-0x02f] Reserved for future use
uint32_t configCmdArgs[3]; // !< [0x030-0x03b] Arguments/Parameters for device Configuration commands
uint32_t reserved2; // !< [0x03c-0x03f] Reserved for future use
uint32_t controllerMiscOption; // !< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more
// ! details
uint8_t deviceType; // !< [0x044-0x044] Device Type: See Flash Type Definition for more details
uint8_t sflashPadType; // !< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
uint8_t serialClkFreq; // !< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot
// ! Chapter for more details
uint8_t lutCustomSeqEnable; // !< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot
// ! be done using 1 LUT sequence, currently, only applicable to HyperFLASH
uint32_t reserved3[2]; // !< [0x048-0x04f] Reserved for future use
uint32_t sflashA1Size; // !< [0x050-0x053] Size of Flash connected to A1
uint32_t sflashA2Size; // !< [0x054-0x057] Size of Flash connected to A2
uint32_t sflashB1Size; // !< [0x058-0x05b] Size of Flash connected to B1
uint32_t sflashB2Size; // !< [0x05c-0x05f] Size of Flash connected to B2
uint32_t csPadSettingOverride; // !< [0x060-0x063] CS pad setting override value
uint32_t sclkPadSettingOverride; // !< [0x064-0x067] SCK pad setting override value
uint32_t dataPadSettingOverride; // !< [0x068-0x06b] data pad setting override value
uint32_t dqsPadSettingOverride; // !< [0x06c-0x06f] DQS pad setting override value
uint32_t timeoutInMs; // !< [0x070-0x073] Timeout threshold for read status command
uint32_t commandInterval; // !< [0x074-0x077] CS deselect interval between two commands
uint16_t dataValidTime[2]; // !< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
uint16_t busyOffset; // !< [0x07c-0x07d] Busy offset, valid value: 0-31
uint16_t busyBitPolarity; // !< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 -
// ! busy flag is 0 when flash device is busy
uint32_t lookupTable[64]; // !< [0x080-0x17f] Lookup table holds Flash command sequences
flexspi_lut_seq_t lutCustomSeq[12]; // !< [0x180-0x1af] Customizable LUT Sequences
uint32_t reserved4[4]; // !< [0x1b0-0x1bf] Reserved for future use
} flexspi_mem_config_t;
/* */
#define NOR_CMD_LUT_SEQ_IDX_READ_NORMAL 0
#define NOR_CMD_LUT_SEQ_IDX_READSTATUSREG 1
#define NOR_CMD_LUT_SEQ_IDX_READ_FAST_QUAD 2
#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE 3
#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI 4
#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5
#define NOR_CMD_LUT_SEQ_IDX_WRITESTATUSREG 6
#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM_QUAD 7
#define NOR_CMD_LUT_SEQ_IDX_READID 8
#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM 9
#define NOR_CMD_LUT_SEQ_IDX_ENTERQPI 10
#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11
#define NOR_CMD_LUT_SEQ_IDX_EXITQPI 12
/*
* Serial NOR configuration block
*/
typedef struct _flexspi_nor_config
{
flexspi_mem_config_t memConfig; // !< Common memory configuration info via FlexSPI
uint32_t pageSize; // !< Page size of Serial NOR
uint32_t sectorSize; // !< Sector size of Serial NOR
uint8_t ipcmdSerialClkFreq; // !< Clock frequency for IP command
uint8_t isUniformBlockSize; // !< Sector/Block size is the same
uint8_t reserved0[2]; // !< Reserved for future use
uint8_t serialNorType; // !< Serial NOR Flash type: 0/1/2/3
uint8_t needExitNoCmdMode; // !< Need to exit NoCmd mode before other IP command
uint8_t halfClkForNonReadCmd; // !< Half the Serial Clock for non-read command: true/false
uint8_t needRestoreNoCmdMode; // !< Need to Restore NoCmd mode after IP commmand execution
uint32_t blockSize; // !< Block size
uint32_t reserve2[11]; // !< Reserved for future use
} flexspi_nor_config_t;
#define FLASH_BUSY_STATUS_POL 0
#define FLASH_BUSY_STATUS_OFFSET 0
#ifdef __cplusplus
extern "C" {
#endif
#ifdef __cplusplus
}
#endif
#endif /* __EVKMIMXRT1060_FLEXSPI_NOR_CONFIG__ */

122
ports/mimxrt/boards/TEENSY40/clock_config.h Normal file
View File

@ -0,0 +1,122 @@
/*
* Copyright 2018-2019 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef _CLOCK_CONFIG_H_
#define _CLOCK_CONFIG_H_
#include "fsl_common.h"
/*******************************************************************************
* Definitions
******************************************************************************/
#define BOARD_XTAL0_CLK_HZ 24000000U /*!< Board xtal0 frequency in Hz */
#define BOARD_XTAL32K_CLK_HZ 32768U /*!< Board xtal32k frequency in Hz */
/*******************************************************************************
************************ BOARD_InitBootClocks function ************************
******************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif /* __cplusplus*/
/*!
* @brief This function executes default configuration of clocks.
*
*/
void BOARD_InitBootClocks(void);
#if defined(__cplusplus)
}
#endif /* __cplusplus*/
/*******************************************************************************
********************** Configuration BOARD_BootClockRUN ***********************
******************************************************************************/
/*******************************************************************************
* Definitions for BOARD_BootClockRUN configuration
******************************************************************************/
#define BOARD_BOOTCLOCKRUN_CORE_CLOCK 600000000U /*!< Core clock frequency: 600000000Hz */
/* Clock outputs (values are in Hz): */
#define BOARD_BOOTCLOCKRUN_AHB_CLK_ROOT 600000000UL
#define BOARD_BOOTCLOCKRUN_CAN_CLK_ROOT 40000000UL
#define BOARD_BOOTCLOCKRUN_CKIL_SYNC_CLK_ROOT 32768UL
#define BOARD_BOOTCLOCKRUN_CLKO1_CLK 0UL
#define BOARD_BOOTCLOCKRUN_CLKO2_CLK 0UL
#define BOARD_BOOTCLOCKRUN_CLK_1M 1000000UL
#define BOARD_BOOTCLOCKRUN_CLK_24M 24000000UL
#define BOARD_BOOTCLOCKRUN_CSI_CLK_ROOT 12000000UL
#define BOARD_BOOTCLOCKRUN_ENET1_TX_CLK 2400000UL
#define BOARD_BOOTCLOCKRUN_ENET2_125M_CLK 1200000UL
#define BOARD_BOOTCLOCKRUN_ENET2_TX_CLK 1200000UL
#define BOARD_BOOTCLOCKRUN_ENET_125M_CLK 2400000UL
#define BOARD_BOOTCLOCKRUN_ENET_25M_REF_CLK 1200000UL
#define BOARD_BOOTCLOCKRUN_FLEXIO1_CLK_ROOT 30000000UL
#define BOARD_BOOTCLOCKRUN_FLEXIO2_CLK_ROOT 30000000UL
#define BOARD_BOOTCLOCKRUN_FLEXSPI2_CLK_ROOT 130909090UL
#define BOARD_BOOTCLOCKRUN_FLEXSPI_CLK_ROOT 130909090UL
#define BOARD_BOOTCLOCKRUN_GPT1_IPG_CLK_HIGHFREQ 75000000UL
#define BOARD_BOOTCLOCKRUN_GPT2_IPG_CLK_HIGHFREQ 75000000UL
#define BOARD_BOOTCLOCKRUN_IPG_CLK_ROOT 150000000UL
#define BOARD_BOOTCLOCKRUN_LCDIF_CLK_ROOT 9642857UL
#define BOARD_BOOTCLOCKRUN_LPI2C_CLK_ROOT 60000000UL
#define BOARD_BOOTCLOCKRUN_LPSPI_CLK_ROOT 105600000UL
#define BOARD_BOOTCLOCKRUN_LVDS1_CLK 1200000000UL
#define BOARD_BOOTCLOCKRUN_MQS_MCLK 63529411UL
#define BOARD_BOOTCLOCKRUN_PERCLK_CLK_ROOT 75000000UL
#define BOARD_BOOTCLOCKRUN_PLL7_MAIN_CLK 24000000UL
#define BOARD_BOOTCLOCKRUN_SAI1_CLK_ROOT 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI1_MCLK1 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI1_MCLK2 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI1_MCLK3 30000000UL
#define BOARD_BOOTCLOCKRUN_SAI2_CLK_ROOT 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI2_MCLK1 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI2_MCLK2 0UL
#define BOARD_BOOTCLOCKRUN_SAI2_MCLK3 30000000UL
#define BOARD_BOOTCLOCKRUN_SAI3_CLK_ROOT 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI3_MCLK1 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI3_MCLK2 0UL
#define BOARD_BOOTCLOCKRUN_SAI3_MCLK3 30000000UL
#define BOARD_BOOTCLOCKRUN_SEMC_CLK_ROOT 75000000UL
#define BOARD_BOOTCLOCKRUN_SPDIF0_CLK_ROOT 30000000UL
#define BOARD_BOOTCLOCKRUN_SPDIF0_EXTCLK_OUT 0UL
#define BOARD_BOOTCLOCKRUN_TRACE_CLK_ROOT 117333333UL
#define BOARD_BOOTCLOCKRUN_UART_CLK_ROOT 80000000UL
#define BOARD_BOOTCLOCKRUN_USBPHY1_CLK 0UL
#define BOARD_BOOTCLOCKRUN_USBPHY2_CLK 0UL
#define BOARD_BOOTCLOCKRUN_USDHC1_CLK_ROOT 198000000UL
#define BOARD_BOOTCLOCKRUN_USDHC2_CLK_ROOT 198000000UL
/*! @brief Arm PLL set for BOARD_BootClockRUN configuration.
*/
extern const clock_arm_pll_config_t armPllConfig_BOARD_BootClockRUN;
/*! @brief Usb1 PLL set for BOARD_BootClockRUN configuration.
*/
extern const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN;
/*! @brief Sys PLL for BOARD_BootClockRUN configuration.
*/
extern const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN;
/*******************************************************************************
* API for BOARD_BootClockRUN configuration
******************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif /* __cplusplus*/
/*!
* @brief This function executes configuration of clocks.
*
*/
void BOARD_BootClockRUN(void);
#if defined(__cplusplus)
}
#endif /* __cplusplus*/
#endif /* _CLOCK_CONFIG_H_ */

144
ports/mimxrt/boards/TEENSY40/flash_config.c
View File

@ -1,144 +0,0 @@
/*
* Copyright 2018 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
// Based on tinyusb/hw/bsp/teensy_40/teensy40_flexspi_nor_config.c
#include "teensy40_flexspi_nor_config.h"
/* Component ID definition, used by tools. */
#ifndef FSL_COMPONENT_ID
#define FSL_COMPONENT_ID "platform.drivers.xip_board"
#endif
/*******************************************************************************
* Code
******************************************************************************/
#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1)
#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__)
__attribute__((section(".boot_hdr.conf")))
#elif defined(__ICCARM__)
#pragma location = ".boot_hdr.conf"
#endif
const flexspi_nor_config_t qspiflash_config = {
.memConfig =
{
.tag = FLEXSPI_CFG_BLK_TAG,
.version = FLEXSPI_CFG_BLK_VERSION,
.readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad,
.csHoldTime = 3u,
.csSetupTime = 3u,
.busyOffset = FLASH_BUSY_STATUS_OFFSET, // Status bit 0 indicates busy.
.busyBitPolarity = FLASH_BUSY_STATUS_POL, // Busy when the bit is 1.
.deviceModeCfgEnable = 1u,
.deviceModeType = kDeviceConfigCmdType_QuadEnable,
.deviceModeSeq = {
.seqId = 4u,
.seqNum = 1u,
},
.deviceModeArg = 0x0200,
.configCmdEnable = 1u,
.configModeType[0] = kDeviceConfigCmdType_Generic,
.configCmdSeqs[0] = {
.seqId = 2u,
.seqNum = 1u,
},
.deviceType = kFlexSpiDeviceType_SerialNOR,
// Enable DDR mode, Wordaddassable, Safe configuration, Differential clock
.sflashPadType = kSerialFlash_4Pads,
.serialClkFreq = kFlexSpiSerialClk_60MHz,
.sflashA1Size = 2u * 1024u * 1024u,
.lookupTable =
{
// 0 Read LUTs 0 -> 0
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18),
FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 1 Read status register -> 1
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x05, READ_SDR, FLEXSPI_1PAD, 0x01),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 2 Fast read quad mode - SDR
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x6B, RADDR_SDR, FLEXSPI_1PAD, 0x18),
FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x08, READ_SDR, FLEXSPI_4PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 3 Write Enable -> 3
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x06, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 4 Read extend parameters
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x81, READ_SDR, FLEXSPI_1PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 5 Erase Sector -> 5
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x20, RADDR_SDR, FLEXSPI_1PAD, 24),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 6 Write Status Reg
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x01, WRITE_SDR, FLEXSPI_1PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 7 Page Program - quad mode (-> 9)
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x32, RADDR_SDR, FLEXSPI_1PAD, 0x18),
FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_4PAD, 0x04, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 8 Read ID
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x90, DUMMY_SDR, FLEXSPI_1PAD, 24),
FLEXSPI_LUT_SEQ(READ_SDR, FLEXSPI_1PAD, 0x00, 0, 0, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 9 Page Program - single mode -> 9
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x02, RADDR_SDR, FLEXSPI_1PAD, 24),
FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0, 0, 0, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 10 Enter QPI mode
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x35, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 11 Erase Chip
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x60, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 12 Exit QPI mode
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_4PAD, 0xF5, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
},
},
.pageSize = 256u,
.sectorSize = 4u * 1024u,
.ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz,
.blockSize = 0x00010000,
.isUniformBlockSize = false,
};
#endif /* XIP_BOOT_HEADER_ENABLE */

18
ports/mimxrt/boards/TEENSY40/mpconfigboard.h
View File

@ -1,14 +1,10 @@
#define MICROPY_HW_BOARD_NAME "Teensy 4.0"
#define MICROPY_HW_MCU_NAME "MIMXRT1062DVJ6A"
#define BOARD_FLASH_SIZE (2 * 1024 * 1024)
// Teensy 4.0 has 1 board LED
#define MICROPY_HW_LED1_PIN (pin_GPIO_B0_03)
#define MICROPY_HW_LED_ON(pin) (mp_hal_pin_high(pin))
#define MICROPY_HW_LED_OFF(pin) (mp_hal_pin_low(pin))
#define BOARD_FLASH_CONFIG_HEADER_H "teensy40_flexspi_nor_config.h"
#define BOARD_FLASH_OPS_HEADER_H "hal/flexspi_nor_flash.h"
#define MICROPY_HW_NUM_PIN_IRQS (4 * 32 + 3)
@ -39,10 +35,10 @@
{ IOMUXC_GPIO_B0_02_LPSPI4_SDO }, { IOMUXC_GPIO_B0_01_LPSPI4_SDI },
#define DMA_REQ_SRC_RX { 0, kDmaRequestMuxLPSPI1Rx, kDmaRequestMuxLPSPI2Rx, \
kDmaRequestMuxLPSPI3Rx, kDmaRequestMuxLPSPI4Rx }
kDmaRequestMuxLPSPI3Rx, kDmaRequestMuxLPSPI4Rx }
#define DMA_REQ_SRC_TX { 0, kDmaRequestMuxLPSPI1Tx, kDmaRequestMuxLPSPI2Tx, \
kDmaRequestMuxLPSPI3Tx, kDmaRequestMuxLPSPI4Tx }
kDmaRequestMuxLPSPI3Tx, kDmaRequestMuxLPSPI4Tx }
// Define mapping hardware I2C # to logical I2C #
// SDA/SCL HW-I2C Logical I2C
@ -63,9 +59,9 @@
{ \
.cmd = {GPIO_SD_B0_00_USDHC1_CMD}, \
.clk = { GPIO_SD_B0_01_USDHC1_CLK }, \
.cd_b = { USDHC_DUMMY_PIN },\
.data0 = { GPIO_SD_B0_02_USDHC1_DATA0 },\
.data1 = { GPIO_SD_B0_03_USDHC1_DATA1 },\
.data2 = { GPIO_SD_B0_04_USDHC1_DATA2 },\
.data3 = { GPIO_SD_B0_05_USDHC1_DATA3 },\
.cd_b = { USDHC_DUMMY_PIN }, \
.data0 = { GPIO_SD_B0_02_USDHC1_DATA0 }, \
.data1 = { GPIO_SD_B0_03_USDHC1_DATA1 }, \
.data2 = { GPIO_SD_B0_04_USDHC1_DATA2 }, \
.data3 = { GPIO_SD_B0_05_USDHC1_DATA3 }, \
}

6
ports/mimxrt/boards/TEENSY40/mpconfigboard.mk
View File

@ -3,9 +3,9 @@ MCU_VARIANT = MIMXRT1062DVJ6A
MICROPY_FLOAT_IMPL = double
MICROPY_PY_MACHINE_SDCARD = 1
BOARD_FLASH_TYPE ?= qspi_nor
BOARD_FLASH_SIZE ?= 0x200000 # 2MB
BOARD_FLASH_RESERVED ?= 0x1000 # 4KB
deploy: $(BUILD)/firmware.hex
teensy_loader_cli --mcu=imxrt1062 -v -w $<
SRC_C += \
hal/flexspi_nor_flash.c

144
ports/mimxrt/boards/TEENSY40/qspi_nor_flash_config.c Normal file
View File

@ -0,0 +1,144 @@
/*
* Copyright 2018 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
// Based on tinyusb/hw/bsp/teensy_40/teensy40_flexspi_nor_config.c
#include BOARD_FLASH_CONFIG_HEADER_H
/* Component ID definition, used by tools. */
#ifndef FSL_COMPONENT_ID
#define FSL_COMPONENT_ID "platform.drivers.xip_board"
#endif
/*******************************************************************************
* Code
******************************************************************************/
#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1)
#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__)
__attribute__((section(".boot_hdr.conf")))
#elif defined(__ICCARM__)
#pragma location = ".boot_hdr.conf"
#endif
const flexspi_nor_config_t qspiflash_config = {
.memConfig =
{
.tag = FLEXSPI_CFG_BLK_TAG,
.version = FLEXSPI_CFG_BLK_VERSION,
.readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad,
.csHoldTime = 3u,
.csSetupTime = 3u,
.busyOffset = FLASH_BUSY_STATUS_OFFSET, // Status bit 0 indicates busy.
.busyBitPolarity = FLASH_BUSY_STATUS_POL, // Busy when the bit is 1.
.deviceModeCfgEnable = 1u,
.deviceModeType = kDeviceConfigCmdType_QuadEnable,
.deviceModeSeq = {
.seqId = 4u,
.seqNum = 1u,
},
.deviceModeArg = 0x0200,
.configCmdEnable = 1u,
.configModeType[0] = kDeviceConfigCmdType_Generic,
.configCmdSeqs[0] = {
.seqId = 2u,
.seqNum = 1u,
},
.deviceType = kFlexSpiDeviceType_SerialNOR,
// Enable DDR mode, Wordaddassable, Safe configuration, Differential clock
.sflashPadType = kSerialFlash_4Pads,
.serialClkFreq = kFlexSpiSerialClk_60MHz,
.sflashA1Size = BOARD_FLASH_SIZE,
.lookupTable =
{
// 0 Read LUTs 0 -> 0
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18),
FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 1 Read status register -> 1
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x05, READ_SDR, FLEXSPI_1PAD, 0x01),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 2 Fast read quad mode - SDR
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x6B, RADDR_SDR, FLEXSPI_1PAD, 0x18),
FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x08, READ_SDR, FLEXSPI_4PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 3 Write Enable -> 3
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x06, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 4 Read extend parameters
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x81, READ_SDR, FLEXSPI_1PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 5 Erase Sector -> 5
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x20, RADDR_SDR, FLEXSPI_1PAD, 24),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 6 Write Status Reg
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x01, WRITE_SDR, FLEXSPI_1PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 7 Page Program - quad mode (-> 9)
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x32, RADDR_SDR, FLEXSPI_1PAD, 0x18),
FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_4PAD, 0x04, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 8 Read ID
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x90, DUMMY_SDR, FLEXSPI_1PAD, 24),
FLEXSPI_LUT_SEQ(READ_SDR, FLEXSPI_1PAD, 0x00, 0, 0, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 9 Page Program - single mode -> 9
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x02, RADDR_SDR, FLEXSPI_1PAD, 24),
FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0, 0, 0, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 10 Enter QPI mode
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x35, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 11 Erase Chip
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x60, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 12 Exit QPI mode
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_4PAD, 0xF5, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
},
},
.pageSize = 256u,
.sectorSize = 4u * 1024u,
.ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz,
.blockSize = 0x00010000,
.isUniformBlockSize = false,
};
#endif /* XIP_BOOT_HEADER_ENABLE */

259
ports/mimxrt/boards/TEENSY40/teensy40_flexspi_nor_config.h
View File

@ -1,259 +0,0 @@
/*
* Copyright 2018 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
// Based on tinyusb/hw/bsp/teensy_40/teensy40_flexspi_nor_config.h
#ifndef __TEENSY40_FLEXSPI_NOR_CONFIG__
#define __TEENSY40_FLEXSPI_NOR_CONFIG__
#include <stdint.h>
#include <stdbool.h>
#include "fsl_common.h"
/*! @name Driver version */
/*@{*/
/*! @brief XIP_BOARD driver version 2.0.0. */
#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0))
/*@}*/
/* FLEXSPI memory config block related defintions */
#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian
#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0
#define FLEXSPI_CFG_BLK_SIZE (512)
/* FLEXSPI Feature related definitions */
#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1
/* Lookup table related definitions */
#define CMD_INDEX_READ 0
#define CMD_INDEX_READSTATUS 1
#define CMD_INDEX_WRITEENABLE 2
#define CMD_INDEX_WRITE 4
#define CMD_LUT_SEQ_IDX_READ 0
#define CMD_LUT_SEQ_IDX_READSTATUS 1
#define CMD_LUT_SEQ_IDX_WRITEENABLE 3
#define CMD_LUT_SEQ_IDX_ERASE 5
#define CMD_LUT_SEQ_IDX_WRITE 9
#define CMD_SDR 0x01
#define CMD_DDR 0x21
#define RADDR_SDR 0x02
#define RADDR_DDR 0x22
#define CADDR_SDR 0x03
#define CADDR_DDR 0x23
#define MODE1_SDR 0x04
#define MODE1_DDR 0x24
#define MODE2_SDR 0x05
#define MODE2_DDR 0x25
#define MODE4_SDR 0x06
#define MODE4_DDR 0x26
#define MODE8_SDR 0x07
#define MODE8_DDR 0x27
#define WRITE_SDR 0x08
#define WRITE_DDR 0x28
#define READ_SDR 0x09
#define READ_DDR 0x29
#define LEARN_SDR 0x0A
#define LEARN_DDR 0x2A
#define DATSZ_SDR 0x0B
#define DATSZ_DDR 0x2B
#define DUMMY_SDR 0x0C
#define DUMMY_DDR 0x2C
#define DUMMY_RWDS_SDR 0x0D
#define DUMMY_RWDS_DDR 0x2D
#define JMP_ON_CS 0x1F
#define STOP 0
#define FLEXSPI_1PAD 0
#define FLEXSPI_2PAD 1
#define FLEXSPI_4PAD 2
#define FLEXSPI_8PAD 3
#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \
(FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \
FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1))
//!@brief Definitions for FlexSPI Serial Clock Frequency
typedef enum _FlexSpiSerialClockFreq
{
kFlexSpiSerialClk_30MHz = 1,
kFlexSpiSerialClk_50MHz = 2,
kFlexSpiSerialClk_60MHz = 3,
kFlexSpiSerialClk_75MHz = 4,
kFlexSpiSerialClk_80MHz = 5,
kFlexSpiSerialClk_100MHz = 6,
kFlexSpiSerialClk_120MHz = 7,
kFlexSpiSerialClk_133MHz = 8,
kFlexSpiSerialClk_166MHz = 9,
} flexspi_serial_clk_freq_t;
//!@brief FlexSPI clock configuration type
enum
{
kFlexSpiClk_SDR, //!< Clock configure for SDR mode
kFlexSpiClk_DDR, //!< Clock configurat for DDR mode
};
//!@brief FlexSPI Read Sample Clock Source definition
typedef enum _FlashReadSampleClkSource
{
kFlexSPIReadSampleClk_LoopbackInternally = 0,
kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1,
kFlexSPIReadSampleClk_LoopbackFromSckPad = 2,
kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3,
} flexspi_read_sample_clk_t;
//!@brief Misc feature bit definitions
enum
{
kFlexSpiMiscOffset_DiffClkEnable = 0, //!< Bit for Differential clock enable
kFlexSpiMiscOffset_Ck2Enable = 1, //!< Bit for CK2 enable
kFlexSpiMiscOffset_ParallelEnable = 2, //!< Bit for Parallel mode enable
kFlexSpiMiscOffset_WordAddressableEnable = 3, //!< Bit for Word Addressable enable
kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, //!< Bit for Safe Configuration Frequency enable
kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, //!< Bit for Pad setting override enable
kFlexSpiMiscOffset_DdrModeEnable = 6, //!< Bit for DDR clock confiuration indication.
};
//!@brief Flash Type Definition
enum
{
kFlexSpiDeviceType_SerialNOR = 1, //!< Flash devices are Serial NOR
kFlexSpiDeviceType_SerialNAND = 2, //!< Flash devices are Serial NAND
kFlexSpiDeviceType_SerialRAM = 3, //!< Flash devices are Serial RAM/HyperFLASH
kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND
kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, //!< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs
};
//!@brief Flash Pad Definitions
enum
{
kSerialFlash_1Pad = 1,
kSerialFlash_2Pads = 2,
kSerialFlash_4Pads = 4,
kSerialFlash_8Pads = 8,
};
//!@brief FlexSPI LUT Sequence structure
typedef struct _lut_sequence
{
uint8_t seqNum; //!< Sequence Number, valid number: 1-16
uint8_t seqId; //!< Sequence Index, valid number: 0-15
uint16_t reserved;
} flexspi_lut_seq_t;
//!@brief Flash Configuration Command Type
enum
{
kDeviceConfigCmdType_Generic, //!< Generic command, for example: configure dummy cycles, drive strength, etc
kDeviceConfigCmdType_QuadEnable, //!< Quad Enable command
kDeviceConfigCmdType_Spi2Xpi, //!< Switch from SPI to DPI/QPI/OPI mode
kDeviceConfigCmdType_Xpi2Spi, //!< Switch from DPI/QPI/OPI to SPI mode
kDeviceConfigCmdType_Spi2NoCmd, //!< Switch to 0-4-4/0-8-8 mode
kDeviceConfigCmdType_Reset, //!< Reset device command
};
//!@brief FlexSPI Memory Configuration Block
typedef struct _FlexSPIConfig
{
uint32_t tag; //!< [0x000-0x003] Tag, fixed value 0x42464346UL
uint32_t version; //!< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
uint32_t reserved0; //!< [0x008-0x00b] Reserved for future use
uint8_t readSampleClkSrc; //!< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
uint8_t csHoldTime; //!< [0x00d-0x00d] CS hold time, default value: 3
uint8_t csSetupTime; //!< [0x00e-0x00e] CS setup time, default value: 3
uint8_t columnAddressWidth; //!< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For
//! Serial NAND, need to refer to datasheet
uint8_t deviceModeCfgEnable; //!< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
uint8_t deviceModeType; //!< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch,
//! Generic configuration, etc.
uint16_t waitTimeCfgCommands; //!< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for
//! DPI/QPI/OPI switch or reset command
flexspi_lut_seq_t deviceModeSeq; //!< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt
//! sequence number, [31:16] Reserved
uint32_t deviceModeArg; //!< [0x018-0x01b] Argument/Parameter for device configuration
uint8_t configCmdEnable; //!< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
uint8_t configModeType[3]; //!< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
flexspi_lut_seq_t
configCmdSeqs[3]; //!< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
uint32_t reserved1; //!< [0x02c-0x02f] Reserved for future use
uint32_t configCmdArgs[3]; //!< [0x030-0x03b] Arguments/Parameters for device Configuration commands
uint32_t reserved2; //!< [0x03c-0x03f] Reserved for future use
uint32_t controllerMiscOption; //!< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more
//! details
uint8_t deviceType; //!< [0x044-0x044] Device Type: See Flash Type Definition for more details
uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot
//! Chapter for more details
uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot
//! be done using 1 LUT sequence, currently, only applicable to HyperFLASH
uint32_t reserved3[2]; //!< [0x048-0x04f] Reserved for future use
uint32_t sflashA1Size; //!< [0x050-0x053] Size of Flash connected to A1
uint32_t sflashA2Size; //!< [0x054-0x057] Size of Flash connected to A2
uint32_t sflashB1Size; //!< [0x058-0x05b] Size of Flash connected to B1
uint32_t sflashB2Size; //!< [0x05c-0x05f] Size of Flash connected to B2
uint32_t csPadSettingOverride; //!< [0x060-0x063] CS pad setting override value
uint32_t sclkPadSettingOverride; //!< [0x064-0x067] SCK pad setting override value
uint32_t dataPadSettingOverride; //!< [0x068-0x06b] data pad setting override value
uint32_t dqsPadSettingOverride; //!< [0x06c-0x06f] DQS pad setting override value
uint32_t timeoutInMs; //!< [0x070-0x073] Timeout threshold for read status command
uint32_t commandInterval; //!< [0x074-0x077] CS deselect interval between two commands
uint16_t dataValidTime[2]; //!< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
uint16_t busyOffset; //!< [0x07c-0x07d] Busy offset, valid value: 0-31
uint16_t busyBitPolarity; //!< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 -
//! busy flag is 0 when flash device is busy
uint32_t lookupTable[64]; //!< [0x080-0x17f] Lookup table holds Flash command sequences
flexspi_lut_seq_t lutCustomSeq[12]; //!< [0x180-0x1af] Customizable LUT Sequences
uint32_t reserved4[4]; //!< [0x1b0-0x1bf] Reserved for future use
} flexspi_mem_config_t;
/* */
#define NOR_CMD_LUT_SEQ_IDX_READ_NORMAL 0
#define NOR_CMD_LUT_SEQ_IDX_READSTATUSREG 1
#define NOR_CMD_LUT_SEQ_IDX_READ_FAST_QUAD 2
#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE 3
#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI 4
#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5
#define NOR_CMD_LUT_SEQ_IDX_WRITESTATUSREG 6
#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM_QUAD 7
#define NOR_CMD_LUT_SEQ_IDX_READID 8
#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM 9
#define NOR_CMD_LUT_SEQ_IDX_ENTERQPI 10
#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11
#define NOR_CMD_LUT_SEQ_IDX_EXITQPI 12
/*
* Serial NOR configuration block
*/
typedef struct _flexspi_nor_config
{
flexspi_mem_config_t memConfig; //!< Common memory configuration info via FlexSPI
uint32_t pageSize; //!< Page size of Serial NOR
uint32_t sectorSize; //!< Sector size of Serial NOR
uint8_t ipcmdSerialClkFreq; //!< Clock frequency for IP command
uint8_t isUniformBlockSize; //!< Sector/Block size is the same
uint8_t reserved0[2]; //!< Reserved for future use
uint8_t serialNorType; //!< Serial NOR Flash type: 0/1/2/3
uint8_t needExitNoCmdMode; //!< Need to exit NoCmd mode before other IP command
uint8_t halfClkForNonReadCmd; //!< Half the Serial Clock for non-read command: true/false
uint8_t needRestoreNoCmdMode; //!< Need to Restore NoCmd mode after IP commmand execution
uint32_t blockSize; //!< Block size
uint32_t reserve2[11]; //!< Reserved for future use
} flexspi_nor_config_t;
#define FLASH_BUSY_STATUS_POL 0
#define FLASH_BUSY_STATUS_OFFSET 0
#ifdef __cplusplus
extern "C" {
#endif
#ifdef __cplusplus
}
#endif
#endif /* __EVKMIMXRT1060_FLEXSPI_NOR_CONFIG__ */

2
ports/mimxrt/boards/TEENSY41/TEENSY41.ld
View File

@ -1,2 +0,0 @@
flash_size = 8M;
reserved_size = 4K;

259
ports/mimxrt/boards/TEENSY41/TEENSY41_flexspi_nor_config.h Normal file
View File

@ -0,0 +1,259 @@
/*
* Copyright 2018 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
// Based on tinyusb/hw/bsp/teensy_40/teensy40_flexspi_nor_config.h
#ifndef __TEENSY40_FLEXSPI_NOR_CONFIG__
#define __TEENSY40_FLEXSPI_NOR_CONFIG__
#include <stdint.h>
#include <stdbool.h>
#include "fsl_common.h"
/*! @name Driver version */
/*@{*/
/*! @brief XIP_BOARD driver version 2.0.0. */
#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0))
/*@}*/
/* FLEXSPI memory config block related defintions */
#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian
#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0
#define FLEXSPI_CFG_BLK_SIZE (512)
/* FLEXSPI Feature related definitions */
#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1
/* Lookup table related definitions */
#define CMD_INDEX_READ 0
#define CMD_INDEX_READSTATUS 1
#define CMD_INDEX_WRITEENABLE 2
#define CMD_INDEX_WRITE 4
#define CMD_LUT_SEQ_IDX_READ 0
#define CMD_LUT_SEQ_IDX_READSTATUS 1
#define CMD_LUT_SEQ_IDX_WRITEENABLE 3
#define CMD_LUT_SEQ_IDX_ERASE 5
#define CMD_LUT_SEQ_IDX_WRITE 9
#define CMD_SDR 0x01
#define CMD_DDR 0x21
#define RADDR_SDR 0x02
#define RADDR_DDR 0x22
#define CADDR_SDR 0x03
#define CADDR_DDR 0x23
#define MODE1_SDR 0x04
#define MODE1_DDR 0x24
#define MODE2_SDR 0x05
#define MODE2_DDR 0x25
#define MODE4_SDR 0x06
#define MODE4_DDR 0x26
#define MODE8_SDR 0x07
#define MODE8_DDR 0x27
#define WRITE_SDR 0x08
#define WRITE_DDR 0x28
#define READ_SDR 0x09
#define READ_DDR 0x29
#define LEARN_SDR 0x0A
#define LEARN_DDR 0x2A
#define DATSZ_SDR 0x0B
#define DATSZ_DDR 0x2B
#define DUMMY_SDR 0x0C
#define DUMMY_DDR 0x2C
#define DUMMY_RWDS_SDR 0x0D
#define DUMMY_RWDS_DDR 0x2D
#define JMP_ON_CS 0x1F
#define STOP 0
#define FLEXSPI_1PAD 0
#define FLEXSPI_2PAD 1
#define FLEXSPI_4PAD 2
#define FLEXSPI_8PAD 3
#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \
(FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \
FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1))
// !@brief Definitions for FlexSPI Serial Clock Frequency
typedef enum _FlexSpiSerialClockFreq
{
kFlexSpiSerialClk_30MHz = 1,
kFlexSpiSerialClk_50MHz = 2,
kFlexSpiSerialClk_60MHz = 3,
kFlexSpiSerialClk_75MHz = 4,
kFlexSpiSerialClk_80MHz = 5,
kFlexSpiSerialClk_100MHz = 6,
kFlexSpiSerialClk_120MHz = 7,
kFlexSpiSerialClk_133MHz = 8,
kFlexSpiSerialClk_166MHz = 9,
} flexspi_serial_clk_freq_t;
// !@brief FlexSPI clock configuration type
enum
{
kFlexSpiClk_SDR, // !< Clock configure for SDR mode
kFlexSpiClk_DDR, // !< Clock configurat for DDR mode
};
// !@brief FlexSPI Read Sample Clock Source definition
typedef enum _FlashReadSampleClkSource
{
kFlexSPIReadSampleClk_LoopbackInternally = 0,
kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1,
kFlexSPIReadSampleClk_LoopbackFromSckPad = 2,
kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3,
} flexspi_read_sample_clk_t;
// !@brief Misc feature bit definitions
enum
{
kFlexSpiMiscOffset_DiffClkEnable = 0, // !< Bit for Differential clock enable
kFlexSpiMiscOffset_Ck2Enable = 1, // !< Bit for CK2 enable
kFlexSpiMiscOffset_ParallelEnable = 2, // !< Bit for Parallel mode enable
kFlexSpiMiscOffset_WordAddressableEnable = 3, // !< Bit for Word Addressable enable
kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, // !< Bit for Safe Configuration Frequency enable
kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, // !< Bit for Pad setting override enable
kFlexSpiMiscOffset_DdrModeEnable = 6, // !< Bit for DDR clock confiuration indication.
};
// !@brief Flash Type Definition
enum
{
kFlexSpiDeviceType_SerialNOR = 1, // !< Flash devices are Serial NOR
kFlexSpiDeviceType_SerialNAND = 2, // !< Flash devices are Serial NAND
kFlexSpiDeviceType_SerialRAM = 3, // !< Flash devices are Serial RAM/HyperFLASH
kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, // !< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND
kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, // !< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs
};
// !@brief Flash Pad Definitions
enum
{
kSerialFlash_1Pad = 1,
kSerialFlash_2Pads = 2,
kSerialFlash_4Pads = 4,
kSerialFlash_8Pads = 8,
};
// !@brief FlexSPI LUT Sequence structure
typedef struct _lut_sequence
{
uint8_t seqNum; // !< Sequence Number, valid number: 1-16
uint8_t seqId; // !< Sequence Index, valid number: 0-15
uint16_t reserved;
} flexspi_lut_seq_t;
// !@brief Flash Configuration Command Type
enum
{
kDeviceConfigCmdType_Generic, // !< Generic command, for example: configure dummy cycles, drive strength, etc
kDeviceConfigCmdType_QuadEnable, // !< Quad Enable command
kDeviceConfigCmdType_Spi2Xpi, // !< Switch from SPI to DPI/QPI/OPI mode
kDeviceConfigCmdType_Xpi2Spi, // !< Switch from DPI/QPI/OPI to SPI mode
kDeviceConfigCmdType_Spi2NoCmd, // !< Switch to 0-4-4/0-8-8 mode
kDeviceConfigCmdType_Reset, // !< Reset device command
};
// !@brief FlexSPI Memory Configuration Block
typedef struct _FlexSPIConfig
{
uint32_t tag; // !< [0x000-0x003] Tag, fixed value 0x42464346UL
uint32_t version; // !< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
uint32_t reserved0; // !< [0x008-0x00b] Reserved for future use
uint8_t readSampleClkSrc; // !< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
uint8_t csHoldTime; // !< [0x00d-0x00d] CS hold time, default value: 3
uint8_t csSetupTime; // !< [0x00e-0x00e] CS setup time, default value: 3
uint8_t columnAddressWidth; // !< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For
// ! Serial NAND, need to refer to datasheet
uint8_t deviceModeCfgEnable; // !< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
uint8_t deviceModeType; // !< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch,
// ! Generic configuration, etc.
uint16_t waitTimeCfgCommands; // !< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for
// ! DPI/QPI/OPI switch or reset command
flexspi_lut_seq_t deviceModeSeq; // !< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt
// ! sequence number, [31:16] Reserved
uint32_t deviceModeArg; // !< [0x018-0x01b] Argument/Parameter for device configuration
uint8_t configCmdEnable; // !< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
uint8_t configModeType[3]; // !< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
flexspi_lut_seq_t
configCmdSeqs[3]; // !< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
uint32_t reserved1; // !< [0x02c-0x02f] Reserved for future use
uint32_t configCmdArgs[3]; // !< [0x030-0x03b] Arguments/Parameters for device Configuration commands
uint32_t reserved2; // !< [0x03c-0x03f] Reserved for future use
uint32_t controllerMiscOption; // !< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more
// ! details
uint8_t deviceType; // !< [0x044-0x044] Device Type: See Flash Type Definition for more details
uint8_t sflashPadType; // !< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
uint8_t serialClkFreq; // !< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot
// ! Chapter for more details
uint8_t lutCustomSeqEnable; // !< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot
// ! be done using 1 LUT sequence, currently, only applicable to HyperFLASH
uint32_t reserved3[2]; // !< [0x048-0x04f] Reserved for future use
uint32_t sflashA1Size; // !< [0x050-0x053] Size of Flash connected to A1
uint32_t sflashA2Size; // !< [0x054-0x057] Size of Flash connected to A2
uint32_t sflashB1Size; // !< [0x058-0x05b] Size of Flash connected to B1
uint32_t sflashB2Size; // !< [0x05c-0x05f] Size of Flash connected to B2
uint32_t csPadSettingOverride; // !< [0x060-0x063] CS pad setting override value
uint32_t sclkPadSettingOverride; // !< [0x064-0x067] SCK pad setting override value
uint32_t dataPadSettingOverride; // !< [0x068-0x06b] data pad setting override value
uint32_t dqsPadSettingOverride; // !< [0x06c-0x06f] DQS pad setting override value
uint32_t timeoutInMs; // !< [0x070-0x073] Timeout threshold for read status command
uint32_t commandInterval; // !< [0x074-0x077] CS deselect interval between two commands
uint16_t dataValidTime[2]; // !< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
uint16_t busyOffset; // !< [0x07c-0x07d] Busy offset, valid value: 0-31
uint16_t busyBitPolarity; // !< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 -
// ! busy flag is 0 when flash device is busy
uint32_t lookupTable[64]; // !< [0x080-0x17f] Lookup table holds Flash command sequences
flexspi_lut_seq_t lutCustomSeq[12]; // !< [0x180-0x1af] Customizable LUT Sequences
uint32_t reserved4[4]; // !< [0x1b0-0x1bf] Reserved for future use
} flexspi_mem_config_t;
/* */
#define NOR_CMD_LUT_SEQ_IDX_READ_NORMAL 0
#define NOR_CMD_LUT_SEQ_IDX_READSTATUSREG 1
#define NOR_CMD_LUT_SEQ_IDX_READ_FAST_QUAD 2
#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE 3
#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI 4
#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5
#define NOR_CMD_LUT_SEQ_IDX_WRITESTATUSREG 6
#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM_QUAD 7
#define NOR_CMD_LUT_SEQ_IDX_READID 8
#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM 9
#define NOR_CMD_LUT_SEQ_IDX_ENTERQPI 10
#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11
#define NOR_CMD_LUT_SEQ_IDX_EXITQPI 12
/*
* Serial NOR configuration block
*/
typedef struct _flexspi_nor_config
{
flexspi_mem_config_t memConfig; // !< Common memory configuration info via FlexSPI
uint32_t pageSize; // !< Page size of Serial NOR
uint32_t sectorSize; // !< Sector size of Serial NOR
uint8_t ipcmdSerialClkFreq; // !< Clock frequency for IP command
uint8_t isUniformBlockSize; // !< Sector/Block size is the same
uint8_t reserved0[2]; // !< Reserved for future use
uint8_t serialNorType; // !< Serial NOR Flash type: 0/1/2/3
uint8_t needExitNoCmdMode; // !< Need to exit NoCmd mode before other IP command
uint8_t halfClkForNonReadCmd; // !< Half the Serial Clock for non-read command: true/false
uint8_t needRestoreNoCmdMode; // !< Need to Restore NoCmd mode after IP commmand execution
uint32_t blockSize; // !< Block size
uint32_t reserve2[11]; // !< Reserved for future use
} flexspi_nor_config_t;
#define FLASH_BUSY_STATUS_POL 0
#define FLASH_BUSY_STATUS_OFFSET 0
#ifdef __cplusplus
extern "C" {
#endif
#ifdef __cplusplus
}
#endif
#endif /* __EVKMIMXRT1060_FLEXSPI_NOR_CONFIG__ */

122
ports/mimxrt/boards/TEENSY41/clock_config.h Normal file
View File

@ -0,0 +1,122 @@
/*
* Copyright 2018-2019 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef _CLOCK_CONFIG_H_
#define _CLOCK_CONFIG_H_
#include "fsl_common.h"
/*******************************************************************************
* Definitions
******************************************************************************/
#define BOARD_XTAL0_CLK_HZ 24000000U /*!< Board xtal0 frequency in Hz */
#define BOARD_XTAL32K_CLK_HZ 32768U /*!< Board xtal32k frequency in Hz */
/*******************************************************************************
************************ BOARD_InitBootClocks function ************************
******************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif /* __cplusplus*/
/*!
* @brief This function executes default configuration of clocks.
*
*/
void BOARD_InitBootClocks(void);
#if defined(__cplusplus)
}
#endif /* __cplusplus*/
/*******************************************************************************
********************** Configuration BOARD_BootClockRUN ***********************
******************************************************************************/
/*******************************************************************************
* Definitions for BOARD_BootClockRUN configuration
******************************************************************************/
#define BOARD_BOOTCLOCKRUN_CORE_CLOCK 600000000U /*!< Core clock frequency: 600000000Hz */
/* Clock outputs (values are in Hz): */
#define BOARD_BOOTCLOCKRUN_AHB_CLK_ROOT 600000000UL
#define BOARD_BOOTCLOCKRUN_CAN_CLK_ROOT 40000000UL
#define BOARD_BOOTCLOCKRUN_CKIL_SYNC_CLK_ROOT 32768UL
#define BOARD_BOOTCLOCKRUN_CLKO1_CLK 0UL
#define BOARD_BOOTCLOCKRUN_CLKO2_CLK 0UL
#define BOARD_BOOTCLOCKRUN_CLK_1M 1000000UL
#define BOARD_BOOTCLOCKRUN_CLK_24M 24000000UL
#define BOARD_BOOTCLOCKRUN_CSI_CLK_ROOT 12000000UL
#define BOARD_BOOTCLOCKRUN_ENET1_TX_CLK 2400000UL
#define BOARD_BOOTCLOCKRUN_ENET2_125M_CLK 1200000UL
#define BOARD_BOOTCLOCKRUN_ENET2_TX_CLK 1200000UL
#define BOARD_BOOTCLOCKRUN_ENET_125M_CLK 2400000UL
#define BOARD_BOOTCLOCKRUN_ENET_25M_REF_CLK 1200000UL
#define BOARD_BOOTCLOCKRUN_FLEXIO1_CLK_ROOT 30000000UL
#define BOARD_BOOTCLOCKRUN_FLEXIO2_CLK_ROOT 30000000UL
#define BOARD_BOOTCLOCKRUN_FLEXSPI2_CLK_ROOT 130909090UL
#define BOARD_BOOTCLOCKRUN_FLEXSPI_CLK_ROOT 130909090UL
#define BOARD_BOOTCLOCKRUN_GPT1_IPG_CLK_HIGHFREQ 75000000UL
#define BOARD_BOOTCLOCKRUN_GPT2_IPG_CLK_HIGHFREQ 75000000UL
#define BOARD_BOOTCLOCKRUN_IPG_CLK_ROOT 150000000UL
#define BOARD_BOOTCLOCKRUN_LCDIF_CLK_ROOT 9642857UL
#define BOARD_BOOTCLOCKRUN_LPI2C_CLK_ROOT 60000000UL
#define BOARD_BOOTCLOCKRUN_LPSPI_CLK_ROOT 105600000UL
#define BOARD_BOOTCLOCKRUN_LVDS1_CLK 1200000000UL
#define BOARD_BOOTCLOCKRUN_MQS_MCLK 63529411UL
#define BOARD_BOOTCLOCKRUN_PERCLK_CLK_ROOT 75000000UL
#define BOARD_BOOTCLOCKRUN_PLL7_MAIN_CLK 24000000UL
#define BOARD_BOOTCLOCKRUN_SAI1_CLK_ROOT 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI1_MCLK1 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI1_MCLK2 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI1_MCLK3 30000000UL
#define BOARD_BOOTCLOCKRUN_SAI2_CLK_ROOT 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI2_MCLK1 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI2_MCLK2 0UL
#define BOARD_BOOTCLOCKRUN_SAI2_MCLK3 30000000UL
#define BOARD_BOOTCLOCKRUN_SAI3_CLK_ROOT 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI3_MCLK1 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI3_MCLK2 0UL
#define BOARD_BOOTCLOCKRUN_SAI3_MCLK3 30000000UL
#define BOARD_BOOTCLOCKRUN_SEMC_CLK_ROOT 75000000UL
#define BOARD_BOOTCLOCKRUN_SPDIF0_CLK_ROOT 30000000UL
#define BOARD_BOOTCLOCKRUN_SPDIF0_EXTCLK_OUT 0UL
#define BOARD_BOOTCLOCKRUN_TRACE_CLK_ROOT 117333333UL
#define BOARD_BOOTCLOCKRUN_UART_CLK_ROOT 80000000UL
#define BOARD_BOOTCLOCKRUN_USBPHY1_CLK 0UL
#define BOARD_BOOTCLOCKRUN_USBPHY2_CLK 0UL
#define BOARD_BOOTCLOCKRUN_USDHC1_CLK_ROOT 198000000UL
#define BOARD_BOOTCLOCKRUN_USDHC2_CLK_ROOT 198000000UL
/*! @brief Arm PLL set for BOARD_BootClockRUN configuration.
*/
extern const clock_arm_pll_config_t armPllConfig_BOARD_BootClockRUN;
/*! @brief Usb1 PLL set for BOARD_BootClockRUN configuration.
*/
extern const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN;
/*! @brief Sys PLL for BOARD_BootClockRUN configuration.
*/
extern const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN;
/*******************************************************************************
* API for BOARD_BootClockRUN configuration
******************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif /* __cplusplus*/
/*!
* @brief This function executes configuration of clocks.
*
*/
void BOARD_BootClockRUN(void);
#if defined(__cplusplus)
}
#endif /* __cplusplus*/
#endif /* _CLOCK_CONFIG_H_ */

144
ports/mimxrt/boards/TEENSY41/flash_config.c
View File

@ -1,144 +0,0 @@
/*
* Copyright 2018 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
// Based on tinyusb/hw/bsp/teensy_40/teensy40_flexspi_nor_config.c
#include "teensy41_flexspi_nor_config.h"
/* Component ID definition, used by tools. */
#ifndef FSL_COMPONENT_ID
#define FSL_COMPONENT_ID "platform.drivers.xip_board"
#endif
/*******************************************************************************
* Code
******************************************************************************/
#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1)
#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__)
__attribute__((section(".boot_hdr.conf")))
#elif defined(__ICCARM__)
#pragma location = ".boot_hdr.conf"
#endif
const flexspi_nor_config_t qspiflash_config = {
.memConfig =
{
.tag = FLEXSPI_CFG_BLK_TAG,
.version = FLEXSPI_CFG_BLK_VERSION,
.readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad,
.csHoldTime = 3u,
.csSetupTime = 3u,
.busyOffset = FLASH_BUSY_STATUS_OFFSET, // Status bit 0 indicates busy.
.busyBitPolarity = FLASH_BUSY_STATUS_POL, // Busy when the bit is 1.
.deviceModeCfgEnable = 1u,
.deviceModeType = kDeviceConfigCmdType_QuadEnable,
.deviceModeSeq = {
.seqId = 4u,
.seqNum = 1u,
},
.deviceModeArg = 0x0200,
.configCmdEnable = 1u,
.configModeType[0] = kDeviceConfigCmdType_Generic,
.configCmdSeqs[0] = {
.seqId = 2u,
.seqNum = 1u,
},
.deviceType = kFlexSpiDeviceType_SerialNOR,
// Enable DDR mode, Wordaddassable, Safe configuration, Differential clock
.sflashPadType = kSerialFlash_4Pads,
.serialClkFreq = kFlexSpiSerialClk_60MHz,
.sflashA1Size = 8u * 1024u * 1024u,
.lookupTable =
{
// 0 Read LUTs 0 -> 0
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18),
FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 1 Read status register -> 1
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x05, READ_SDR, FLEXSPI_1PAD, 0x01),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 2 Fast read quad mode - SDR
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x6B, RADDR_SDR, FLEXSPI_1PAD, 0x18),
FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x08, READ_SDR, FLEXSPI_4PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 3 Write Enable -> 3
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x06, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 4 Read extend parameters
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x81, READ_SDR, FLEXSPI_1PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 5 Erase Sector -> 5
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x20, RADDR_SDR, FLEXSPI_1PAD, 24),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 6 Write Status Reg
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x01, WRITE_SDR, FLEXSPI_1PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 7 Page Program - quad mode (-> 9)
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x32, RADDR_SDR, FLEXSPI_1PAD, 0x18),
FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_4PAD, 0x04, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 8 Read ID
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x90, DUMMY_SDR, FLEXSPI_1PAD, 24),
FLEXSPI_LUT_SEQ(READ_SDR, FLEXSPI_1PAD, 0x00, 0, 0, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 9 Page Program - single mode -> 9
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x02, RADDR_SDR, FLEXSPI_1PAD, 24),
FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0, 0, 0, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 10 Enter QPI mode
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x35, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 11 Erase Chip
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x60, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 12 Exit QPI mode
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_4PAD, 0xF5, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
},
},
.pageSize = 256u,
.sectorSize = 4u * 1024u,
.ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz,
.blockSize = 0x00010000,
.isUniformBlockSize = false,
};
#endif /* XIP_BOOT_HEADER_ENABLE */

18
ports/mimxrt/boards/TEENSY41/mpconfigboard.h
View File

@ -1,14 +1,10 @@
#define MICROPY_HW_BOARD_NAME "Teensy 4.1"
#define MICROPY_HW_MCU_NAME "MIMXRT1062DVJ6A"
#define BOARD_FLASH_SIZE (8 * 1024 * 1024)
// Teensy 4.1 has 1 board LED
#define MICROPY_HW_LED1_PIN (pin_GPIO_B0_03)
#define MICROPY_HW_LED_ON(pin) (mp_hal_pin_high(pin))
#define MICROPY_HW_LED_OFF(pin) (mp_hal_pin_low(pin))
#define BOARD_FLASH_CONFIG_HEADER_H "teensy41_flexspi_nor_config.h"
#define BOARD_FLASH_OPS_HEADER_H "hal/flexspi_nor_flash.h"
#define MICROPY_HW_NUM_PIN_IRQS (4 * 32 + 3)
@ -39,10 +35,10 @@
{ IOMUXC_GPIO_B0_02_LPSPI4_SDO }, { IOMUXC_GPIO_B0_01_LPSPI4_SDI },
#define DMA_REQ_SRC_RX { 0, kDmaRequestMuxLPSPI1Rx, kDmaRequestMuxLPSPI2Rx, \
kDmaRequestMuxLPSPI3Rx, kDmaRequestMuxLPSPI4Rx }
kDmaRequestMuxLPSPI3Rx, kDmaRequestMuxLPSPI4Rx }
#define DMA_REQ_SRC_TX { 0, kDmaRequestMuxLPSPI1Tx, kDmaRequestMuxLPSPI2Tx, \
kDmaRequestMuxLPSPI3Tx, kDmaRequestMuxLPSPI4Tx }
kDmaRequestMuxLPSPI3Tx, kDmaRequestMuxLPSPI4Tx }
// Define mapping hardware I2C # to logical I2C #
// SDA/SCL HW-I2C Logical I2C
@ -63,9 +59,9 @@
{ \
.cmd = {GPIO_SD_B0_00_USDHC1_CMD}, \
.clk = { GPIO_SD_B0_01_USDHC1_CLK }, \
.cd_b = { USDHC_DUMMY_PIN },\
.data0 = { GPIO_SD_B0_02_USDHC1_DATA0 },\
.data1 = { GPIO_SD_B0_03_USDHC1_DATA1 },\
.data2 = { GPIO_SD_B0_04_USDHC1_DATA2 },\
.data3 = { GPIO_SD_B0_05_USDHC1_DATA3 },\
.cd_b = { USDHC_DUMMY_PIN }, \
.data0 = { GPIO_SD_B0_02_USDHC1_DATA0 }, \
.data1 = { GPIO_SD_B0_03_USDHC1_DATA1 }, \
.data2 = { GPIO_SD_B0_04_USDHC1_DATA2 }, \
.data3 = { GPIO_SD_B0_05_USDHC1_DATA3 }, \
}

6
ports/mimxrt/boards/TEENSY41/mpconfigboard.mk
View File

@ -3,9 +3,9 @@ MCU_VARIANT = MIMXRT1062DVJ6A
MICROPY_FLOAT_IMPL = double
MICROPY_PY_MACHINE_SDCARD = 1
BOARD_FLASH_TYPE ?= qspi_nor
BOARD_FLASH_SIZE ?= 0x800000 # 8MB
BOARD_FLASH_RESERVED ?= 0x1000 # 4KB
deploy: $(BUILD)/firmware.hex
teensy_loader_cli --mcu=imxrt1062 -v -w $<
SRC_C += \
hal/flexspi_nor_flash.c

144
ports/mimxrt/boards/TEENSY41/qspi_nor_flash_config.c Normal file
View File

@ -0,0 +1,144 @@
/*
* Copyright 2018 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
// Based on tinyusb/hw/bsp/teensy_40/teensy40_flexspi_nor_config.c
#include BOARD_FLASH_CONFIG_HEADER_H
/* Component ID definition, used by tools. */
#ifndef FSL_COMPONENT_ID
#define FSL_COMPONENT_ID "platform.drivers.xip_board"
#endif
/*******************************************************************************
* Code
******************************************************************************/
#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1)
#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__)
__attribute__((section(".boot_hdr.conf")))
#elif defined(__ICCARM__)
#pragma location = ".boot_hdr.conf"
#endif
const flexspi_nor_config_t qspiflash_config = {
.memConfig =
{
.tag = FLEXSPI_CFG_BLK_TAG,
.version = FLEXSPI_CFG_BLK_VERSION,
.readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad,
.csHoldTime = 3u,
.csSetupTime = 3u,
.busyOffset = FLASH_BUSY_STATUS_OFFSET, // Status bit 0 indicates busy.
.busyBitPolarity = FLASH_BUSY_STATUS_POL, // Busy when the bit is 1.
.deviceModeCfgEnable = 1u,
.deviceModeType = kDeviceConfigCmdType_QuadEnable,
.deviceModeSeq = {
.seqId = 4u,
.seqNum = 1u,
},
.deviceModeArg = 0x0200,
.configCmdEnable = 1u,
.configModeType[0] = kDeviceConfigCmdType_Generic,
.configCmdSeqs[0] = {
.seqId = 2u,
.seqNum = 1u,
},
.deviceType = kFlexSpiDeviceType_SerialNOR,
// Enable DDR mode, Wordaddassable, Safe configuration, Differential clock
.sflashPadType = kSerialFlash_4Pads,
.serialClkFreq = kFlexSpiSerialClk_60MHz,
.sflashA1Size = BOARD_FLASH_SIZE,
.lookupTable =
{
// 0 Read LUTs 0 -> 0
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18),
FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 1 Read status register -> 1
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x05, READ_SDR, FLEXSPI_1PAD, 0x01),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 2 Fast read quad mode - SDR
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x6B, RADDR_SDR, FLEXSPI_1PAD, 0x18),
FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x08, READ_SDR, FLEXSPI_4PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 3 Write Enable -> 3
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x06, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 4 Read extend parameters
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x81, READ_SDR, FLEXSPI_1PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 5 Erase Sector -> 5
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x20, RADDR_SDR, FLEXSPI_1PAD, 24),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 6 Write Status Reg
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x01, WRITE_SDR, FLEXSPI_1PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 7 Page Program - quad mode (-> 9)
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x32, RADDR_SDR, FLEXSPI_1PAD, 0x18),
FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_4PAD, 0x04, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 8 Read ID
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x90, DUMMY_SDR, FLEXSPI_1PAD, 24),
FLEXSPI_LUT_SEQ(READ_SDR, FLEXSPI_1PAD, 0x00, 0, 0, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 9 Page Program - single mode -> 9
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x02, RADDR_SDR, FLEXSPI_1PAD, 24),
FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0, 0, 0, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 10 Enter QPI mode
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x35, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 11 Erase Chip
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x60, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 12 Exit QPI mode
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_4PAD, 0xF5, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
},
},
.pageSize = 256u,
.sectorSize = 4u * 1024u,
.ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz,
.blockSize = 0x00010000,
.isUniformBlockSize = false,
};
#endif /* XIP_BOOT_HEADER_ENABLE */

259
ports/mimxrt/boards/TEENSY41/teensy41_flexspi_nor_config.h
View File

@ -1,259 +0,0 @@
/*
* Copyright 2018 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
// Based on tinyusb/hw/bsp/teensy_40/teensy40_flexspi_nor_config.h
#ifndef __TEENSY40_FLEXSPI_NOR_CONFIG__
#define __TEENSY40_FLEXSPI_NOR_CONFIG__
#include <stdint.h>
#include <stdbool.h>
#include "fsl_common.h"
/*! @name Driver version */
/*@{*/
/*! @brief XIP_BOARD driver version 2.0.0. */
#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0))
/*@}*/
/* FLEXSPI memory config block related defintions */
#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian
#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0
#define FLEXSPI_CFG_BLK_SIZE (512)
/* FLEXSPI Feature related definitions */
#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1
/* Lookup table related definitions */
#define CMD_INDEX_READ 0
#define CMD_INDEX_READSTATUS 1
#define CMD_INDEX_WRITEENABLE 2
#define CMD_INDEX_WRITE 4
#define CMD_LUT_SEQ_IDX_READ 0
#define CMD_LUT_SEQ_IDX_READSTATUS 1
#define CMD_LUT_SEQ_IDX_WRITEENABLE 3
#define CMD_LUT_SEQ_IDX_ERASE 5
#define CMD_LUT_SEQ_IDX_WRITE 9
#define CMD_SDR 0x01
#define CMD_DDR 0x21
#define RADDR_SDR 0x02
#define RADDR_DDR 0x22
#define CADDR_SDR 0x03
#define CADDR_DDR 0x23
#define MODE1_SDR 0x04
#define MODE1_DDR 0x24
#define MODE2_SDR 0x05
#define MODE2_DDR 0x25
#define MODE4_SDR 0x06
#define MODE4_DDR 0x26
#define MODE8_SDR 0x07
#define MODE8_DDR 0x27
#define WRITE_SDR 0x08
#define WRITE_DDR 0x28
#define READ_SDR 0x09
#define READ_DDR 0x29
#define LEARN_SDR 0x0A
#define LEARN_DDR 0x2A
#define DATSZ_SDR 0x0B
#define DATSZ_DDR 0x2B
#define DUMMY_SDR 0x0C
#define DUMMY_DDR 0x2C
#define DUMMY_RWDS_SDR 0x0D
#define DUMMY_RWDS_DDR 0x2D
#define JMP_ON_CS 0x1F
#define STOP 0
#define FLEXSPI_1PAD 0
#define FLEXSPI_2PAD 1
#define FLEXSPI_4PAD 2
#define FLEXSPI_8PAD 3
#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \
(FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \
FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1))
//!@brief Definitions for FlexSPI Serial Clock Frequency
typedef enum _FlexSpiSerialClockFreq
{
kFlexSpiSerialClk_30MHz = 1,
kFlexSpiSerialClk_50MHz = 2,
kFlexSpiSerialClk_60MHz = 3,
kFlexSpiSerialClk_75MHz = 4,
kFlexSpiSerialClk_80MHz = 5,
kFlexSpiSerialClk_100MHz = 6,
kFlexSpiSerialClk_120MHz = 7,
kFlexSpiSerialClk_133MHz = 8,
kFlexSpiSerialClk_166MHz = 9,
} flexspi_serial_clk_freq_t;
//!@brief FlexSPI clock configuration type
enum
{
kFlexSpiClk_SDR, //!< Clock configure for SDR mode
kFlexSpiClk_DDR, //!< Clock configurat for DDR mode
};
//!@brief FlexSPI Read Sample Clock Source definition
typedef enum _FlashReadSampleClkSource
{
kFlexSPIReadSampleClk_LoopbackInternally = 0,
kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1,
kFlexSPIReadSampleClk_LoopbackFromSckPad = 2,
kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3,
} flexspi_read_sample_clk_t;
//!@brief Misc feature bit definitions
enum
{
kFlexSpiMiscOffset_DiffClkEnable = 0, //!< Bit for Differential clock enable
kFlexSpiMiscOffset_Ck2Enable = 1, //!< Bit for CK2 enable
kFlexSpiMiscOffset_ParallelEnable = 2, //!< Bit for Parallel mode enable
kFlexSpiMiscOffset_WordAddressableEnable = 3, //!< Bit for Word Addressable enable
kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, //!< Bit for Safe Configuration Frequency enable
kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, //!< Bit for Pad setting override enable
kFlexSpiMiscOffset_DdrModeEnable = 6, //!< Bit for DDR clock confiuration indication.
};
//!@brief Flash Type Definition
enum
{
kFlexSpiDeviceType_SerialNOR = 1, //!< Flash devices are Serial NOR
kFlexSpiDeviceType_SerialNAND = 2, //!< Flash devices are Serial NAND
kFlexSpiDeviceType_SerialRAM = 3, //!< Flash devices are Serial RAM/HyperFLASH
kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND
kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, //!< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs
};
//!@brief Flash Pad Definitions
enum
{
kSerialFlash_1Pad = 1,
kSerialFlash_2Pads = 2,
kSerialFlash_4Pads = 4,
kSerialFlash_8Pads = 8,
};
//!@brief FlexSPI LUT Sequence structure
typedef struct _lut_sequence
{
uint8_t seqNum; //!< Sequence Number, valid number: 1-16
uint8_t seqId; //!< Sequence Index, valid number: 0-15
uint16_t reserved;
} flexspi_lut_seq_t;
//!@brief Flash Configuration Command Type
enum
{
kDeviceConfigCmdType_Generic, //!< Generic command, for example: configure dummy cycles, drive strength, etc
kDeviceConfigCmdType_QuadEnable, //!< Quad Enable command
kDeviceConfigCmdType_Spi2Xpi, //!< Switch from SPI to DPI/QPI/OPI mode
kDeviceConfigCmdType_Xpi2Spi, //!< Switch from DPI/QPI/OPI to SPI mode
kDeviceConfigCmdType_Spi2NoCmd, //!< Switch to 0-4-4/0-8-8 mode
kDeviceConfigCmdType_Reset, //!< Reset device command
};
//!@brief FlexSPI Memory Configuration Block
typedef struct _FlexSPIConfig
{
uint32_t tag; //!< [0x000-0x003] Tag, fixed value 0x42464346UL
uint32_t version; //!< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
uint32_t reserved0; //!< [0x008-0x00b] Reserved for future use
uint8_t readSampleClkSrc; //!< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
uint8_t csHoldTime; //!< [0x00d-0x00d] CS hold time, default value: 3
uint8_t csSetupTime; //!< [0x00e-0x00e] CS setup time, default value: 3
uint8_t columnAddressWidth; //!< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For
//! Serial NAND, need to refer to datasheet
uint8_t deviceModeCfgEnable; //!< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
uint8_t deviceModeType; //!< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch,
//! Generic configuration, etc.
uint16_t waitTimeCfgCommands; //!< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for
//! DPI/QPI/OPI switch or reset command
flexspi_lut_seq_t deviceModeSeq; //!< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt
//! sequence number, [31:16] Reserved
uint32_t deviceModeArg; //!< [0x018-0x01b] Argument/Parameter for device configuration
uint8_t configCmdEnable; //!< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
uint8_t configModeType[3]; //!< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
flexspi_lut_seq_t
configCmdSeqs[3]; //!< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
uint32_t reserved1; //!< [0x02c-0x02f] Reserved for future use
uint32_t configCmdArgs[3]; //!< [0x030-0x03b] Arguments/Parameters for device Configuration commands
uint32_t reserved2; //!< [0x03c-0x03f] Reserved for future use
uint32_t controllerMiscOption; //!< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more
//! details
uint8_t deviceType; //!< [0x044-0x044] Device Type: See Flash Type Definition for more details
uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot
//! Chapter for more details
uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot
//! be done using 1 LUT sequence, currently, only applicable to HyperFLASH
uint32_t reserved3[2]; //!< [0x048-0x04f] Reserved for future use
uint32_t sflashA1Size; //!< [0x050-0x053] Size of Flash connected to A1
uint32_t sflashA2Size; //!< [0x054-0x057] Size of Flash connected to A2
uint32_t sflashB1Size; //!< [0x058-0x05b] Size of Flash connected to B1
uint32_t sflashB2Size; //!< [0x05c-0x05f] Size of Flash connected to B2
uint32_t csPadSettingOverride; //!< [0x060-0x063] CS pad setting override value
uint32_t sclkPadSettingOverride; //!< [0x064-0x067] SCK pad setting override value
uint32_t dataPadSettingOverride; //!< [0x068-0x06b] data pad setting override value
uint32_t dqsPadSettingOverride; //!< [0x06c-0x06f] DQS pad setting override value
uint32_t timeoutInMs; //!< [0x070-0x073] Timeout threshold for read status command
uint32_t commandInterval; //!< [0x074-0x077] CS deselect interval between two commands
uint16_t dataValidTime[2]; //!< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
uint16_t busyOffset; //!< [0x07c-0x07d] Busy offset, valid value: 0-31
uint16_t busyBitPolarity; //!< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 -
//! busy flag is 0 when flash device is busy
uint32_t lookupTable[64]; //!< [0x080-0x17f] Lookup table holds Flash command sequences
flexspi_lut_seq_t lutCustomSeq[12]; //!< [0x180-0x1af] Customizable LUT Sequences
uint32_t reserved4[4]; //!< [0x1b0-0x1bf] Reserved for future use
} flexspi_mem_config_t;
/* */
#define NOR_CMD_LUT_SEQ_IDX_READ_NORMAL 0
#define NOR_CMD_LUT_SEQ_IDX_READSTATUSREG 1
#define NOR_CMD_LUT_SEQ_IDX_READ_FAST_QUAD 2
#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE 3
#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI 4
#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5
#define NOR_CMD_LUT_SEQ_IDX_WRITESTATUSREG 6
#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM_QUAD 7
#define NOR_CMD_LUT_SEQ_IDX_READID 8
#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM 9
#define NOR_CMD_LUT_SEQ_IDX_ENTERQPI 10
#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11
#define NOR_CMD_LUT_SEQ_IDX_EXITQPI 12
/*
* Serial NOR configuration block
*/
typedef struct _flexspi_nor_config
{
flexspi_mem_config_t memConfig; //!< Common memory configuration info via FlexSPI
uint32_t pageSize; //!< Page size of Serial NOR
uint32_t sectorSize; //!< Sector size of Serial NOR
uint8_t ipcmdSerialClkFreq; //!< Clock frequency for IP command
uint8_t isUniformBlockSize; //!< Sector/Block size is the same
uint8_t reserved0[2]; //!< Reserved for future use
uint8_t serialNorType; //!< Serial NOR Flash type: 0/1/2/3
uint8_t needExitNoCmdMode; //!< Need to exit NoCmd mode before other IP command
uint8_t halfClkForNonReadCmd; //!< Half the Serial Clock for non-read command: true/false
uint8_t needRestoreNoCmdMode; //!< Need to Restore NoCmd mode after IP commmand execution
uint32_t blockSize; //!< Block size
uint32_t reserve2[11]; //!< Reserved for future use
} flexspi_nor_config_t;
#define FLASH_BUSY_STATUS_POL 0
#define FLASH_BUSY_STATUS_OFFSET 0
#ifdef __cplusplus
extern "C" {
#endif
#ifdef __cplusplus
}
#endif
#endif /* __EVKMIMXRT1060_FLEXSPI_NOR_CONFIG__ */

219
ports/mimxrt/boards/make-flexram-config.py Normal file
View File

@ -0,0 +1,219 @@
#!/usr/bin/env python3
#
# This file is part of the MicroPython project, http://micropython.org/
#
# The MIT License (MIT)
#
# Copyright (c) 2021 Philipp Ebensberger
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to deal
# in the Software without restriction, including without limitation the rights
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
# copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
# THE SOFTWARE.
"""Evaluate FlexRAM configuration and generate startup code."""
import re
import argparse
# Regex for linker script configuration
ocram_regex = r"^\s*ocrm_size\s*=\s*(?P<size>.*);"
dtcm_regex = r"^\s*dtcm_size\s*=\s*(?P<size>.*);"
itcm_regex = r"^\s*itcm_size\s*=\s*(?P<size>.*);"
# Regex for GPR register base define in NXL hal
gpr_base_regex = r"^.*IOMUXC_GPR_BASE\s*\((?P<base_addr>\w*)u\)"
# Regex for FlexRAM parameters in NXP HAL
fsl_ram_bank_size_regex = r"^.*FSL_FEATURE_FLEXRAM_INTERNAL_RAM_BANK_SIZE\s*\((?P<size>\w*)\)"
fsl_bank_nbr_regex = (
r"^.*FSL_FEATURE_FLEXRAM_INTERNAL_RAM_TOTAL_BANK_NUMBERS\s*\((?P<number>\w*)\)"
)
"""
According to AN12077:
The minimum configuration of OCRAM is 64 KB. This is required
due to ROM code requires at least 64 KB of RAM for its execution.
2.1.1.1. Static configuration - Page 4
"""
ocram_min_size = 0x00010000 # 64 KB
# Value parser
def mimxrt_default_parser(defines_file, features_file, ld_script):
with open(ld_script, "r") as input_file:
input_str = input_file.read()
#
ocram_match = re.search(ocram_regex, input_str, re.MULTILINE)
dtcm_match = re.search(dtcm_regex, input_str, re.MULTILINE)
itcm_match = re.search(itcm_regex, input_str, re.MULTILINE)
with open(defines_file, "r") as input_file:
input_str = input_file.read()
mcu_define_file_match = re.search(gpr_base_regex, input_str, re.MULTILINE)
with open(features_file, "r") as input_file:
input_str = input_file.read()
fsl_ram_bank_size_match = re.search(fsl_ram_bank_size_regex, input_str, re.MULTILINE)
fsl_bank_nbr_match = re.search(fsl_bank_nbr_regex, input_str, re.MULTILINE)
#
extract = {
"ocram_size": int(ocram_match.group("size"), 16),
"dtcm_size": int(dtcm_match.group("size"), 16),
"itcm_size": int(itcm_match.group("size"), 16),
"gpr_base_addr": int(mcu_define_file_match.group("base_addr"), 16),
"fsl_ram_bank_size": int(fsl_ram_bank_size_match.group("size")),
"fsl_bank_nbr": int(fsl_bank_nbr_match.group("number")),
}
# Evaluate configuration
if extract["ocram_size"] < ocram_min_size:
raise ValueError("OCRAM size must be at least {:08X}!".format(ocram_min_size))
if (extract["ocram_size"] % extract["fsl_ram_bank_size"]) != 0:
raise ValueError("Configuration invalid!")
# Check if DTCM and ITCM size is either multiple of 32k or 4k,8k or 16k
if extract["dtcm_size"] != 0x0:
if extract["dtcm_size"] % extract["fsl_ram_bank_size"] != 0:
if extract["dtcm_size"] not in (0x00000000, 0x00001000, 0x00002000, 0x00004000):
raise ValueError("Configuration invalid!")
if extract["itcm_size"] != 0x0:
if extract["itcm_size"] % extract["fsl_ram_bank_size"] != 0:
if extract["itcm_size"] not in (0x00000000, 0x00001000, 0x00002000, 0x00004000):
raise ValueError("Configuration invalid!")
#
return extract
# Code generators
def mimxrt_default_gen_code(extract_dict):
flexram_bank_cfg = "0b"
avail_flexram = extract_dict["fsl_ram_bank_size"] * extract_dict["fsl_bank_nbr"]
if (
extract_dict["ocram_size"] + extract_dict["dtcm_size"] + extract_dict["itcm_size"]
) > avail_flexram:
raise ValueError("Configuration exceeds available FlexRAM!")
bit_patterns = (
(extract_dict["ocram_size"], "01"),
(extract_dict["dtcm_size"], "10"),
(extract_dict["itcm_size"], "11"),
)
for size, pattern in bit_patterns:
for _ in range(0, size, extract_dict["fsl_ram_bank_size"]):
flexram_bank_cfg += pattern
# Generate GPR Register config
print(".equ __iomux_gpr14_adr, 0x{:08X}".format(extract_dict["gpr_base_addr"] + 0x38))
print(".equ __iomux_gpr16_adr, 0x{:08X}".format(extract_dict["gpr_base_addr"] + 0x40))
print(".equ __iomux_gpr17_adr, 0x{:08X}".format(extract_dict["gpr_base_addr"] + 0x44))
print(
".equ __iomux_gpr17_value, 0x{:08X} /* {}k OCRAM, {}k DTCM, {}k ITCM */".format(
int(flexram_bank_cfg, 2),
extract_dict["ocram_size"] // 1024,
extract_dict["dtcm_size"] // 1024,
extract_dict["itcm_size"] // 1024,
)
)
def mimxrt_106x_gen_code(extract_dict):
flexram_bank_cfg = "0b"
avail_flexram = extract_dict["fsl_ram_bank_size"] * extract_dict["fsl_bank_nbr"]
flexram_configurable_ocram = (
extract_dict["ocram_size"] % 524288
) # 512kB OCRAM are not part of FlexRAM configurable memory
if (
flexram_configurable_ocram + extract_dict["dtcm_size"] + extract_dict["itcm_size"]
) > avail_flexram:
raise ValueError("Configuration exceeds available FlexRAM!")
for size, pattern in (
(flexram_configurable_ocram, "01"),
(extract_dict["dtcm_size"], "10"),
(extract_dict["itcm_size"], "11"),
):
for _ in range(0, size, extract_dict["fsl_ram_bank_size"]):
flexram_bank_cfg += pattern
# Generate GPR Register config
print(".equ __iomux_gpr14_adr, 0x{:08X}".format(extract_dict["gpr_base_addr"] + 0x38))
print(".equ __iomux_gpr16_adr, 0x{:08X}".format(extract_dict["gpr_base_addr"] + 0x40))
print(".equ __iomux_gpr17_adr, 0x{:08X}".format(extract_dict["gpr_base_addr"] + 0x44))
print(
".equ __iomux_gpr17_value, 0x{:08X} /* {}k OCRAM (512k OCRAM, {}k from FlexRAM), {}k DTCM, {}k ITCM */".format(
int(flexram_bank_cfg, 2),
extract_dict["ocram_size"] // 1024,
flexram_configurable_ocram // 1024,
extract_dict["dtcm_size"] // 1024,
extract_dict["itcm_size"] // 1024,
)
)
def main(defines_file, features_file, ld_script, controller):
dispatcher = {
"MIMXRT1011": (mimxrt_default_parser, mimxrt_default_gen_code),
"MIMXRT1021": (mimxrt_default_parser, mimxrt_default_gen_code),
"MIMXRT1052": (mimxrt_default_parser, mimxrt_default_gen_code),
"MIMXRT1062": (mimxrt_default_parser, mimxrt_106x_gen_code),
"MIMXRT1064": (mimxrt_default_parser, mimxrt_106x_gen_code),
}
extractor, code_generator = dispatcher[controller]
extract_dict = extractor(defines_file, features_file, ld_script)
code_generator(extract_dict)
if __name__ == "__main__":
parser = argparse.ArgumentParser(
prog="make-flexram-ld.py",
usage="%(prog)s [options] [command]",
description="Evaluate FlexRAM configuration and generate startup code.",
)
parser.add_argument(
"-d",
"--defines_file",
dest="defines_file",
help="Path to MCU defines file",
default="../../../lib/nxp_driver/sdk/devices/MIMXRT1021/MIMXRT1021.h",
)
parser.add_argument(
"-f",
"--features_file",
dest="features_file",
help="Path to MCU features file",
default="../../../lib/nxp_driver/sdk/devices/MIMXRT1021/MIMXRT1021_features.h",
)
parser.add_argument(
"-l",
"--ld_file",
dest="linker_file",
help="Path to the aggregated linker-script",
default="MIMXRT1021.ld",
)
parser.add_argument(
"-c", "--controller", dest="controller", help="Controller name", default="MIMXRT1021"
)
#
args = parser.parse_args()
main(args.defines_file, args.features_file, args.linker_file, args.controller)

33
ports/mimxrt/hal/board.h Normal file
View File

@ -0,0 +1,33 @@
/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2021 Philipp Ebensberger
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#ifndef MICROPY_INCLUDED_MIMXRT_BOARD_H
#define MICROPY_INCLUDED_MIMXRT_BOARD_H
#include "clock_config.h"
#include "fsl_common.h"
#endif /* MICROPY_INCLUDED_MIMXRT_BOARD_H */

99
ports/mimxrt/hal/flexspi_hyper_flash.c
View File

@ -16,14 +16,15 @@
__attribute__((always_inline)) static inline void clock_set_div(clock_div_t divider, uint32_t value) {
uint32_t busyShift;
busyShift = CCM_TUPLE_BUSY_SHIFT(divider);
busyShift = CCM_TUPLE_BUSY_SHIFT(divider);
CCM_TUPLE_REG(CCM, divider) = (CCM_TUPLE_REG(CCM, divider) & (~CCM_TUPLE_MASK(divider))) |
(((uint32_t)((value) << CCM_TUPLE_SHIFT(divider))) & CCM_TUPLE_MASK(divider));
(((uint32_t)((value) << CCM_TUPLE_SHIFT(divider))) & CCM_TUPLE_MASK(divider));
/* Clock switch need Handshake? */
if (CCM_NO_BUSY_WAIT != busyShift) {
/* Wait until CCM internal handshake finish. */
while (CCM->CDHIPR & (1U << busyShift)) {}
while (CCM->CDHIPR & (1U << busyShift)) {
}
}
}
@ -32,7 +33,7 @@ __attribute__((always_inline)) static inline void clock_control_gate(clock_ip_na
uint32_t shift = ((uint32_t)name) & 0x1FU;
volatile uint32_t *reg;
reg = ((volatile uint32_t *)&CCM->CCGR0) + index;
reg = ((volatile uint32_t *)&CCM->CCGR0) + index;
*reg = ((*reg) & ~(3U << shift)) | (((uint32_t)value) << shift);
}
@ -44,9 +45,9 @@ __attribute__((always_inline)) static inline void clock_disable_clock(clock_ip_n
clock_control_gate(name, kCLOCK_ClockNotNeeded);
}
#define DIV_PAGE_PGM 4
#define DIV_ERASE_PGM 4
#define DIV_READ 0
#define DIV_PAGE_PGM 4
#define DIV_ERASE_PGM 4
#define DIV_READ 0
static void SetFlexSPIDiv(uint32_t div) __attribute__((section(".ram_functions")));
static void SetFlexSPIDiv(uint32_t div) {
@ -54,7 +55,7 @@ static void SetFlexSPIDiv(uint32_t div) {
clock_disable_clock(kCLOCK_FlexSpi);
clock_set_div(kCLOCK_FlexspiDiv, div); /* flexspi clock 332M, DDR mode, internal clock 166M. */
clock_enable_clock(kCLOCK_FlexSpi);
FLEXSPI_Enable(FLEXSPI, true);
FLEXSPI_Enable(FLEXSPI, true);
}
status_t flexspi_nor_hyperbus_read(FLEXSPI_Type *base, uint32_t addr, uint32_t *buffer, uint32_t bytes) __attribute__((section(".ram_functions")));
@ -63,13 +64,13 @@ status_t flexspi_nor_hyperbus_read(FLEXSPI_Type *base, uint32_t addr, uint32_t *
status_t status;
flashXfer.deviceAddress = addr * 2;
flashXfer.port = kFLEXSPI_PortA1;
flashXfer.cmdType = kFLEXSPI_Read;
flashXfer.SeqNumber = 1;
flashXfer.seqIndex = HYPERFLASH_CMD_LUT_SEQ_IDX_READDATA;
flashXfer.data = buffer;
flashXfer.dataSize = bytes;
status = FLEXSPI_TransferBlocking(base, &flashXfer);
flashXfer.port = kFLEXSPI_PortA1;
flashXfer.cmdType = kFLEXSPI_Read;
flashXfer.SeqNumber = 1;
flashXfer.seqIndex = HYPERFLASH_CMD_LUT_SEQ_IDX_READDATA;
flashXfer.data = buffer;
flashXfer.dataSize = bytes;
status = FLEXSPI_TransferBlocking(base, &flashXfer);
return status;
}
@ -80,13 +81,13 @@ status_t flexspi_nor_hyperbus_write(FLEXSPI_Type *base, uint32_t addr, uint32_t
status_t status;
flashXfer.deviceAddress = addr * 2;
flashXfer.port = kFLEXSPI_PortA1;
flashXfer.cmdType = kFLEXSPI_Write;
flashXfer.SeqNumber = 1;
flashXfer.seqIndex = HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEDATA;
flashXfer.data = buffer;
flashXfer.dataSize = bytes;
status = FLEXSPI_TransferBlocking(base, &flashXfer);
flashXfer.port = kFLEXSPI_PortA1;
flashXfer.cmdType = kFLEXSPI_Write;
flashXfer.SeqNumber = 1;
flashXfer.seqIndex = HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEDATA;
flashXfer.data = buffer;
flashXfer.dataSize = bytes;
status = FLEXSPI_TransferBlocking(base, &flashXfer);
return status;
}
@ -98,10 +99,10 @@ status_t flexspi_nor_write_enable(FLEXSPI_Type *base, uint32_t baseAddr) {
/* Write enable */
flashXfer.deviceAddress = baseAddr;
flashXfer.port = kFLEXSPI_PortA1;
flashXfer.cmdType = kFLEXSPI_Command;
flashXfer.SeqNumber = 2;
flashXfer.seqIndex = HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE;
flashXfer.port = kFLEXSPI_PortA1;
flashXfer.cmdType = kFLEXSPI_Command;
flashXfer.SeqNumber = 2;
flashXfer.seqIndex = HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE;
status = FLEXSPI_TransferBlocking(base, &flashXfer);
@ -117,12 +118,12 @@ status_t flexspi_nor_wait_bus_busy(FLEXSPI_Type *base) {
flexspi_transfer_t flashXfer;
flashXfer.deviceAddress = 0;
flashXfer.port = kFLEXSPI_PortA1;
flashXfer.cmdType = kFLEXSPI_Read;
flashXfer.SeqNumber = 2;
flashXfer.seqIndex = HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS;
flashXfer.data = &readValue;
flashXfer.dataSize = 2;
flashXfer.port = kFLEXSPI_PortA1;
flashXfer.cmdType = kFLEXSPI_Read;
flashXfer.SeqNumber = 2;
flashXfer.seqIndex = HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS;
flashXfer.data = &readValue;
flashXfer.dataSize = 2;
do {
status = FLEXSPI_TransferBlocking(base, &flashXfer);
@ -159,11 +160,11 @@ status_t flexspi_nor_flash_erase_sector(FLEXSPI_Type *base, uint32_t address) {
}
flashXfer.deviceAddress = address;
flashXfer.port = kFLEXSPI_PortA1;
flashXfer.cmdType = kFLEXSPI_Command;
flashXfer.SeqNumber = 4;
flashXfer.seqIndex = HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR;
status = FLEXSPI_TransferBlocking(base, &flashXfer);
flashXfer.port = kFLEXSPI_PortA1;
flashXfer.cmdType = kFLEXSPI_Command;
flashXfer.SeqNumber = 4;
flashXfer.seqIndex = HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR;
status = FLEXSPI_TransferBlocking(base, &flashXfer);
if (status != kStatus_Success) {
return status;
@ -174,13 +175,13 @@ status_t flexspi_nor_flash_erase_sector(FLEXSPI_Type *base, uint32_t address) {
return status;
}
status_t flexspi_nor_flash_page_program(FLEXSPI_Type *base, uint32_t address, const uint32_t *src, uint32_t size ) __attribute__((section(".ram_functions")));
status_t flexspi_nor_flash_page_program(FLEXSPI_Type *base, uint32_t address, const uint32_t *src, uint32_t size) __attribute__((section(".ram_functions")));
status_t flexspi_nor_flash_page_program(FLEXSPI_Type *base, uint32_t address, const uint32_t *src, uint32_t size) {
status_t status;
flexspi_transfer_t flashXfer;
/* Speed down flexspi clock */
SetFlexSPIDiv(DIV_PAGE_PGM);
SetFlexSPIDiv(DIV_PAGE_PGM);
/* Write enable */
status = flexspi_nor_write_enable(base, address);
@ -191,13 +192,13 @@ status_t flexspi_nor_flash_page_program(FLEXSPI_Type *base, uint32_t address, co
/* Prepare page program command */
flashXfer.deviceAddress = address;
flashXfer.port = kFLEXSPI_PortA1;
flashXfer.cmdType = kFLEXSPI_Write;
flashXfer.SeqNumber = 2;
flashXfer.seqIndex = HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM;
flashXfer.data = (uint32_t *)src;
flashXfer.dataSize = size;
status = FLEXSPI_TransferBlocking(base, &flashXfer);
flashXfer.port = kFLEXSPI_PortA1;
flashXfer.cmdType = kFLEXSPI_Write;
flashXfer.SeqNumber = 2;
flashXfer.seqIndex = HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM;
flashXfer.data = (uint32_t *)src;
flashXfer.dataSize = size;
status = FLEXSPI_TransferBlocking(base, &flashXfer);
if (status != kStatus_Success) {
return status;
@ -205,7 +206,7 @@ status_t flexspi_nor_flash_page_program(FLEXSPI_Type *base, uint32_t address, co
status = flexspi_nor_wait_bus_busy(base);
SetFlexSPIDiv(DIV_READ);
SetFlexSPIDiv(DIV_READ);
return status;
}
@ -219,7 +220,7 @@ status_t flexspi_nor_hyperflash_cfi(FLEXSPI_Type *base) {
status_t status;
uint32_t buffer[2];
uint8_t data[4] = {0x00, 0x98};
status = flexspi_nor_hyperbus_write(base, 0x555, (uint32_t *)data, 2);
status = flexspi_nor_hyperbus_write(base, 0x555, (uint32_t *)data, 2);
if (status != kStatus_Success) {
return status;
}
@ -238,7 +239,7 @@ status_t flexspi_nor_hyperflash_cfi(FLEXSPI_Type *base) {
}
// ASO Exit 0xF000
data[1] = 0xF0;
status = flexspi_nor_hyperbus_write(base, 0x0, (uint32_t *)data, 2);
status = flexspi_nor_hyperbus_write(base, 0x0, (uint32_t *)data, 2);
if (status != kStatus_Success) {
return status;
}

3
ports/mimxrt/hal/flexspi_hyper_flash.h
View File

@ -26,15 +26,14 @@
#ifndef MICROPY_INCLUDED_MIMXRT_HAL_FLEXSPI_HYPER_FLASH_H
#define MICROPY_INCLUDED_MIMXRT_HAL_FLEXSPI_HYPER_FLASH_H
#include "mpconfigboard.h"
#include "fsl_flexspi.h"
#include "mpconfigboard.h"
#include BOARD_FLASH_CONFIG_HEADER_H
// Defined in boards flash_config.c
extern flexspi_nor_config_t qspiflash_config;
status_t flexspi_nor_hyperflash_cfi(FLEXSPI_Type *base);
void flexspi_hyper_flash_init(void);
void flexspi_nor_update_lut(void);
status_t flexspi_nor_flash_erase_sector(FLEXSPI_Type *base, uint32_t address);
status_t flexspi_nor_flash_page_program(FLEXSPI_Type *base, uint32_t address, const uint32_t *src, uint32_t size);

15
ports/mimxrt/hal/flexspi_nor_flash.c
View File

@ -41,8 +41,7 @@ void flexspi_nor_reset(FLEXSPI_Type *base) __attribute__((section(".ram_function
void flexspi_nor_reset(FLEXSPI_Type *base) {
// Using content of FLEXSPI_SoftwareReset directly to prevent issues when compiler does not inline function
base->MCR0 |= FLEXSPI_MCR0_SWRESET_MASK;
while (base->MCR0 & FLEXSPI_MCR0_SWRESET_MASK)
{
while (base->MCR0 & FLEXSPI_MCR0_SWRESET_MASK) {
}
}
@ -63,7 +62,7 @@ status_t flexspi_nor_write_enable(FLEXSPI_Type *base, uint32_t baseAddr) {
return status;
}
status_t flexspi_nor_wait_bus_busy(FLEXSPI_Type *base) __attribute__((section(".ram_functions"))) ;
status_t flexspi_nor_wait_bus_busy(FLEXSPI_Type *base) __attribute__((section(".ram_functions")));
status_t flexspi_nor_wait_bus_busy(FLEXSPI_Type *base) {
/* Wait status ready. */
bool isBusy;
@ -103,7 +102,7 @@ status_t flexspi_nor_wait_bus_busy(FLEXSPI_Type *base) {
return status;
}
status_t flexspi_nor_enable_quad_mode(FLEXSPI_Type *base) __attribute__((section(".ram_functions"))) ;
status_t flexspi_nor_enable_quad_mode(FLEXSPI_Type *base) __attribute__((section(".ram_functions")));
status_t flexspi_nor_enable_quad_mode(FLEXSPI_Type *base) {
flexspi_transfer_t flashXfer;
status_t status;
@ -135,7 +134,7 @@ status_t flexspi_nor_enable_quad_mode(FLEXSPI_Type *base) {
return status;
}
status_t flexspi_nor_flash_erase_sector(FLEXSPI_Type *base, uint32_t address) __attribute__((section(".ram_functions"))) ;
status_t flexspi_nor_flash_erase_sector(FLEXSPI_Type *base, uint32_t address) __attribute__((section(".ram_functions")));
status_t flexspi_nor_flash_erase_sector(FLEXSPI_Type *base, uint32_t address) {
status_t status;
flexspi_transfer_t flashXfer;
@ -166,7 +165,7 @@ status_t flexspi_nor_flash_erase_sector(FLEXSPI_Type *base, uint32_t address) {
return status;
}
status_t flexspi_nor_flash_page_program(FLEXSPI_Type *base, uint32_t dstAddr, const uint32_t *src, uint32_t size) __attribute__((section(".ram_functions"))) ;
status_t flexspi_nor_flash_page_program(FLEXSPI_Type *base, uint32_t dstAddr, const uint32_t *src, uint32_t size) __attribute__((section(".ram_functions")));
status_t flexspi_nor_flash_page_program(FLEXSPI_Type *base, uint32_t dstAddr, const uint32_t *src, uint32_t size) {
status_t status;
flexspi_transfer_t flashXfer;
@ -184,7 +183,7 @@ status_t flexspi_nor_flash_page_program(FLEXSPI_Type *base, uint32_t dstAddr, co
flashXfer.cmdType = kFLEXSPI_Write;
flashXfer.SeqNumber = 1;
flashXfer.seqIndex = NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM_QUAD;
flashXfer.data = (uint32_t *) src;
flashXfer.data = (uint32_t *)src;
flashXfer.dataSize = size;
status = FLEXSPI_TransferBlocking(base, &flashXfer);
@ -199,7 +198,7 @@ status_t flexspi_nor_flash_page_program(FLEXSPI_Type *base, uint32_t dstAddr, co
return status;
}
status_t flexspi_nor_get_vendor_id(FLEXSPI_Type *base, uint8_t *vendorId) __attribute__((section(".ram_functions"))) ;
status_t flexspi_nor_get_vendor_id(FLEXSPI_Type *base, uint8_t *vendorId) __attribute__((section(".ram_functions")));
status_t flexspi_nor_get_vendor_id(FLEXSPI_Type *base, uint8_t *vendorId) {
uint32_t temp;
flexspi_transfer_t flashXfer;

1
ports/mimxrt/hal/flexspi_nor_flash.h
View File

@ -34,7 +34,6 @@
extern flexspi_nor_config_t qspiflash_config;
status_t flexspi_nor_get_vendor_id(FLEXSPI_Type *base, uint8_t *vendorId);
status_t flexspi_nor_init(void);
void flexspi_nor_update_lut(void);
status_t flexspi_nor_flash_erase_sector(FLEXSPI_Type *base, uint32_t address);
status_t flexspi_nor_flash_page_program(FLEXSPI_Type *base, uint32_t address, const uint32_t *src, uint32_t size);

1
ports/mimxrt/hal/peripherals.h Normal file
View File

@ -0,0 +1 @@
// Empty file, necessary for compilation with NXP MCU SDK

1
ports/mimxrt/hal/pin_mux.h Normal file
View File

@ -0,0 +1 @@
// Empty file, necessary for compilation with NXP MCU SDK

175
ports/mimxrt/hal/resethandler_MIMXRT10xx.S Normal file
View File

@ -0,0 +1,175 @@
/* ------------------------------------------------------------------------- */
/* */
/* Copyright 1997-2016 Freescale Semiconductor, Inc. */
/* Copyright 2016-2019 NXP */
/* All rights reserved. */
/* */
/* SPDX-License-Identifier: BSD-3-Clause */
/*****************************************************************************/
/* Version: GCC for ARM Embedded Processors */
/*****************************************************************************/
.syntax unified
.arch armv7-m
#include"flexram_config.s"
/* Reset Handler */
.thumb_func
.align 2
.globl Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
cpsid i /* Mask interrupts */
.equ VTOR, 0xE000ED08
ldr r0, =VTOR
ldr r1, =__isr_vector
str r1, [r0]
ldr r2, [r1]
msr msp, r2
/* Reconfigure the memory map, which must match the setting of the linker script */
dsb
isb
ldr r0, =__iomux_gpr17_adr /* load IOMUXC_GPR17 register address to R0 */
ldr r1, =__iomux_gpr17_value /* move FlexRAM configuration value to R1 */
str r1,[r0] /* store FLEXRAM configuration value to IOMUXC_GPR17 */
dsb
isb
ldr r0, =__iomux_gpr16_adr /* load IOMUXC_GPR16 register address to R0 */
ldr r1,[r0] /* load IOMUXC_GPR16 register value to R1 */
orr r1, r1, #4 /* set corresponding FLEXRAM_BANK_CFG_SEL bit */
str r1,[r0] /* store the value to IOMUXC_GPR16 (FLEXRAM_BANK_CFG_SEL = '1') */
dsb
isb
#ifndef __NO_SYSTEM_INIT
ldr r0,=SystemInit
blx r0
#endif
/* Loop to copy data from read only memory to RAM. The ranges
* of copy from/to are specified by following symbols evaluated in
* linker script.
* __etext: End of code section, i.e., begin of data sections to copy from.
* __data_start__/__data_end__: RAM address range that data should be
* __noncachedata_start__/__noncachedata_end__ : none cachable region
* __ram_function_start__/__ram_function_end__ : ramfunction region
* copied to. Both must be aligned to 4 bytes boundary. */
ldr r1, =__etext
ldr r2, =__data_start__
ldr r3, =__data_end__
#ifdef __PERFORMANCE_IMPLEMENTATION
/* Here are two copies of loop implementations. First one favors performance
* and the second one favors code size. Default uses the second one.
* Define macro "__PERFORMANCE_IMPLEMENTATION" in project to use the first one */
subs r3, r2
ble .LC1
.LC0:
subs r3, #4
ldr r0, [r1, r3]
str r0, [r2, r3]
bgt .LC0
.LC1:
#else /* code size implemenation */
.LC0:
cmp r2, r3
ittt lt
ldrlt r0, [r1], #4
strlt r0, [r2], #4
blt .LC0
#endif
#ifdef __STARTUP_INITIALIZE_RAMFUNCTION
ldr r2, =__ram_function_start__
ldr r3, =__ram_function_end__
#ifdef __PERFORMANCE_IMPLEMENTATION
/* Here are two copies of loop implementations. First one favors performance
* and the second one favors code size. Default uses the second one.
* Define macro "__PERFORMANCE_IMPLEMENTATION" in project to use the first one */
subs r3, r2
ble .LC_ramfunc_copy_end
.LC_ramfunc_copy_start:
subs r3, #4
ldr r0, [r1, r3]
str r0, [r2, r3]
bgt .LC_ramfunc_copy_start
.LC_ramfunc_copy_end:
#else /* code size implemenation */
.LC_ramfunc_copy_start:
cmp r2, r3
ittt lt
ldrlt r0, [r1], #4
strlt r0, [r2], #4
blt .LC_ramfunc_copy_start
#endif
#endif /* __STARTUP_INITIALIZE_RAMFUNCTION */
#ifdef __STARTUP_INITIALIZE_NONCACHEDATA
ldr r2, =__noncachedata_start__
ldr r3, =__noncachedata_init_end__
#ifdef __PERFORMANCE_IMPLEMENTATION
/* Here are two copies of loop implementations. First one favors performance
* and the second one favors code size. Default uses the second one.
* Define macro "__PERFORMANCE_IMPLEMENTATION" in project to use the first one */
subs r3, r2
ble .LC3
.LC2:
subs r3, #4
ldr r0, [r1, r3]
str r0, [r2, r3]
bgt .LC2
.LC3:
#else /* code size implemenation */
.LC2:
cmp r2, r3
ittt lt
ldrlt r0, [r1], #4
strlt r0, [r2], #4
blt .LC2
#endif
/* zero inited ncache section initialization */
ldr r3, =__noncachedata_end__
movs r0,0
.LC4:
cmp r2,r3
itt lt
strlt r0,[r2],#4
blt .LC4
#endif /* __STARTUP_INITIALIZE_NONCACHEDATA */
#ifdef __STARTUP_CLEAR_BSS
/* This part of work usually is done in C library startup code. Otherwise,
* define this macro to enable it in this startup.
*
* Loop to zero out BSS section, which uses following symbols
* in linker script:
* __bss_start__: start of BSS section. Must align to 4
* __bss_end__: end of BSS section. Must align to 4
*/
ldr r1, =__bss_start__
ldr r2, =__bss_end__
movs r0, 0
.LC5:
cmp r1, r2
itt lt
strlt r0, [r1], #4
blt .LC5
#endif /* __STARTUP_CLEAR_BSS */
cpsie i /* Unmask interrupts */
#ifndef __START
#define __START _start
#endif
#ifndef __ATOLLIC__
ldr r0,=__START
blx r0
#else
ldr r0,=__libc_init_array
blx r0
ldr r0,=main
bx r0
#endif
.pool
.size Reset_Handler, . - Reset_Handler

2
tools/autobuild/build-mimxrt-latest.sh
View File

@ -34,4 +34,4 @@ fi
do_build TEENSY40 TEENSY40 hex
do_build TEENSY41 TEENSY41 hex
do_build MIMXRT1020_EVK MIMXRT1020_EVK bin
do_build MIMXRT1050_EVKB MIMXRT1050_EVKB bin
do_build MIMXRT1050_EVK MIMXRT1050_EVK bin

1
tools/codeformat.py
View File

@ -52,6 +52,7 @@ PATHS = [
"examples/**/*.py",
"extmod/**/*.py",
"ports/**/*.py",
"ports/mimxrt/**/*.[ch]",
"py/**/*.py",
"tools/**/*.py",
"tests/**/*.py",