micropython/docs/library/machine.Pin.rst

.. currentmodule:: machine
.. _machine.Pin:

class Pin -- control I/O pins
=============================

A pin object is used to control I/O pins (also known as GPIO - general-purpose
input/output).  Pin objects are commonly associated with a physical pin that can
drive an output voltage and read input voltages.  The pin class has methods to set the mode of
the pin (IN, OUT, etc) and methods to get and set the digital logic level.
For analog control of a pin, see the :class:`ADC` class.

A pin object is constructed by using an identifier which unambiguously
specifies a certain I/O pin.  The allowed forms of the identifier and the
physical pin that the identifier maps to are port-specific.  Possibilities
for the identifier are an integer, a string or a tuple with port and pin
number.

Usage Model::

    from machine import Pin

    # create an output pin on pin #0
    p0 = Pin(0, Pin.OUT)

    # set the value low then high
    p0.value(0)
    p0.value(1)

    # create an input pin on pin #2, with a pull up resistor
    p2 = Pin(2, Pin.IN, Pin.PULL_UP)

    # read and print the pin value
    print(p2.value())

    # reconfigure pin #0 in input mode
    p0.mode(p0.IN)

    # configure an irq callback
    p0.irq(lambda p:print(p))

Constructors
------------

.. class:: Pin(id, mode=-1, pull=-1, \*, value, drive, alt)

   Access the pin peripheral (GPIO pin) associated with the given ``id``.  If
   additional arguments are given in the constructor then they are used to initialise
   the pin.  Any settings that are not specified will remain in their previous state.

   The arguments are:

     - ``id`` is mandatory and can be an arbitrary object.  Among possible value
       types are: int (an internal Pin identifier), str (a Pin name), and tuple
       (pair of [port, pin]).

     - ``mode`` specifies the pin mode, which can be one of:

       - ``Pin.IN`` - Pin is configured for input.  If viewed as an output the pin
         is in high-impedance state.

       - ``Pin.OUT`` - Pin is configured for (normal) output.

       - ``Pin.OPEN_DRAIN`` - Pin is configured for open-drain output. Open-drain
         output works in the following way: if the output value is set to 0 the pin
         is active at a low level; if the output value is 1 the pin is in a high-impedance
         state.  Not all ports implement this mode, or some might only on certain pins.

       - ``Pin.ALT`` - Pin is configured to perform an alternative function, which is
         port specific.  For a pin configured in such a way any other Pin methods
         (except :meth:`Pin.init`) are not applicable (calling them will lead to undefined,
         or a hardware-specific, result).  Not all ports implement this mode.

       - ``Pin.ALT_OPEN_DRAIN`` - The Same as ``Pin.ALT``, but the pin is configured as
         open-drain.  Not all ports implement this mode.

     - ``pull`` specifies if the pin has a (weak) pull resistor attached, and can be
       one of:

       - ``None`` - No pull up or down resistor.
       - ``Pin.PULL_UP`` - Pull up resistor enabled.
       - ``Pin.PULL_DOWN`` - Pull down resistor enabled.

     - ``value`` is valid only for Pin.OUT and Pin.OPEN_DRAIN modes and specifies initial
       output pin value if given, otherwise the state of the pin peripheral remains
       unchanged.

     - ``drive`` specifies the output power of the pin and can be one of: ``Pin.LOW_POWER``,
       ``Pin.MED_POWER`` or ``Pin.HIGH_POWER``.  The actual current driving capabilities
       are port dependent.  Not all ports implement this argument.

     - ``alt`` specifies an alternate function for the pin and the values it can take are
       port dependent.  This argument is valid only for ``Pin.ALT`` and ``Pin.ALT_OPEN_DRAIN``
       modes.  It may be used when a pin supports more than one alternate function.  If only
       one pin alternate function is supported the this argument is not required.  Not all
       ports implement this argument.

   As specified above, the Pin class allows to set an alternate function for a particular
   pin, but it does not specify any further operations on such a pin.  Pins configured in
   alternate-function mode are usually not used as GPIO but are instead driven by other
   hardware peripherals.  The only operation supported on such a pin is re-initialising,
   by calling the constructor or :meth:`Pin.init` method.  If a pin that is configured in
   alternate-function mode is re-initialised with ``Pin.IN``, ``Pin.OUT``, or
   ``Pin.OPEN_DRAIN``, the alternate function will be removed from the pin.

Methods
-------

.. method:: Pin.init(mode=-1, pull=-1, \*, value, drive, alt)

   Re-initialise the pin using the given parameters.  Only those arguments that
   are specified will be set.  The rest of the pin peripheral state will remain
   unchanged.  See the constructor documentation for details of the arguments.

   Returns ``None``.

.. method:: Pin.value([x])

   This method allows to set and get the value of the pin, depending on whether
   the argument ``x`` is supplied or not.

   If the argument is omitted then this method gets the digital logic level of
   the pin, returning 0 or 1 corresponding to low and high voltage signals
   respectively.  The behaviour of this method depends on the mode of the pin:

     - ``Pin.IN`` - The method returns the actual input value currently present
       on the pin.
     - ``Pin.OUT`` - The behaviour and return value of the method is undefined.
     - ``Pin.OPEN_DRAIN`` - If the pin is in state '0' then the behaviour and
       return value of the method is undefined.  Otherwise, if the pin is in
       state '1', the method returns the actual input value currently present
       on the pin.

   If the argument is supplied then this method sets the digital logic level of
   the pin.  The argument ``x`` can be anything that converts to a boolean.
   If it converts to ``True``, the pin is set to state '1', otherwise it is set
   to state '0'.  The behaviour of this method depends on the mode of the pin:

     - ``Pin.IN`` - The value is stored in the output buffer for the pin.  The
       pin state does not change, it remains in the high-impedance state.  The
       stored value will become active on the pin as soon as it is changed to
       ``Pin.OUT`` or ``Pin.OPEN_DRAIN`` mode.
     - ``Pin.OUT`` - The output buffer is set to the given value immediately.
     - ``Pin.OPEN_DRAIN`` - If the value is '0' the pin is set to a low voltage
       state.  Otherwise the pin is set to high-impedance state.

   When setting the value this method returns ``None``.

.. method:: Pin.out_value()

   Return the value stored in the output buffer of a pin, regardless of its mode.

   Not all ports implement this method.

.. method:: Pin.__call__([x])

   Pin objects are callable.  The call method provides a (fast) shortcut to set
   and get the value of the pin.  It is equivalent to Pin.value([x]).
   See :meth:`Pin.value` for more details.

.. method:: Pin.id()

   Get the pin identifier.  This may return the ``id`` as specified in the
   constructor.  Or it may return a canonical software-specific pin id.

.. method:: Pin.mode([mode])

   Get or set the pin mode.
   See the constructor documentation for details of the ``mode`` argument.

.. method:: Pin.pull([pull])

   Get or set the pin pull state.
   See the constructor documentation for details of the ``pull`` argument.

.. method:: Pin.drive([drive])

   Get or set the pin drive strength.
   See the constructor documentation for details of the ``drive`` argument.

   Not all ports implement this method.

   Availability: WiPy.

.. method:: Pin.irq(handler=None, trigger=(Pin.IRQ_FALLING | Pin.IRQ_RISING), \*, priority=1, wake=None)

   Configure an interrupt handler to be called when the trigger source of the
   pin is active.  If the pin mode is ``Pin.IN`` then the trigger source is
   the external value on the pin.  If the pin mode is ``Pin.OUT`` then the
   trigger source is the output buffer of the pin.  Otherwise, if the pin mode
   is ``Pin.OPEN_DRAIN`` then the trigger source is the output buffer for
   state '0' and the external pin value for state '1'.

   The arguments are:

     - ``handler`` is an optional function to be called when the interrupt
       triggers.

     - ``trigger`` configures the event which can generate an interrupt.
       Possible values are:

       - ``Pin.IRQ_FALLING`` interrupt on falling edge.
       - ``Pin.IRQ_RISING`` interrupt on rising edge.
       - ``Pin.IRQ_LOW_LEVEL`` interrupt on low level.
       - ``Pin.IRQ_HIGH_LEVEL`` interrupt on high level.

       These values can be OR'ed together to trigger on multiple events.

     - ``priority`` sets the priority level of the interrupt.  The values it
       can take are port-specific, but higher values always represent higher
       priorities.

     - ``wake`` selects the power mode in which this interrupt can wake up the
       system.  It can be ``machine.IDLE``, ``machine.SLEEP`` or ``machine.DEEPSLEEP``.
       These values can also be OR'ed together to make a pin generate interrupts in
       more than one power mode.

   This method returns a callback object.

Attributes
----------

.. class:: Pin.board

    Contains all ``Pin`` objects supported by the board. Examples::

        Pin.board.GP25
        led = Pin(Pin.board.GP25, mode=Pin.OUT)
        Pin.board.GP2.alt_list()

    Availability: WiPy.

Constants
---------

The following constants are used to configure the pin objects.  Note that
not all constants are available on all ports.

.. data:: Pin.IN
          Pin.OUT
          Pin.OPEN_DRAIN
          Pin.ALT
          Pin.ALT_OPEN_DRAIN

   Selects the pin mode.

.. data:: Pin.PULL_UP
          Pin.PULL_DOWN

   Selects whether there is a pull up/down resistor.  Use the value
   ``None`` for no pull.

.. data:: Pin.LOW_POWER
          Pin.MED_POWER
          Pin.HIGH_POWER

   Selects the pin drive strength.

.. data:: Pin.IRQ_FALLING
          Pin.IRQ_RISING
          Pin.IRQ_LOW_LEVEL
          Pin.IRQ_HIGH_LEVEL

   Selects the IRQ trigger type.