diff --git a/doc/Makefile.am b/doc/Makefile.am
index c192da138..9d33a7753 100644
--- a/doc/Makefile.am
+++ b/doc/Makefile.am
@@ -1,7 +1,7 @@
 DIST_SUBDIRS = hints man hlp
 SUBDIRS = hints man hlp
 
-DOCS = FAQ HACKING INSTALL INSTALL.FAST MAINTAINERS README.QNX MIRRORS.txt
+DOCS = FAQ HACKING INSTALL INSTALL.FAST MAINTAINERS MIRRORS.txt
 EXTRA_DIST = $(DX_CONFIG) doxygen-include.am $(DOCS)
 
 include doxygen-include.am
diff --git a/doc/README.QNX b/doc/README.QNX
deleted file mode 100644
index c4675d092..000000000
--- a/doc/README.QNX
+++ /dev/null
@@ -1,313 +0,0 @@
-Midnight Commander for QNX (not QNX Neutrino)
----------------------------------------------
-
-1. Compiling
-2. Running 'mc' under QNX
-3. List of modifications on mc-4.1.33
-4. TODO
-5. Contact information
-
-1. Compiling
-------------
-
-1.1 Make utility
-----------------
-
-Use 'gmake'. (This is the default 'make' under QNX 4.23+). [The old 'qmake'
-cannot handle the makefiles in the mc-source.]
-
-1.2 Configuring
----------------
-
-If you don't have an installed TCP/IP development kit, you have to 'hide'
-the library file 'socket3r.lib' (can be installed by e.g. Watcom C 10.6)
-in /usr/lib or /usr/watcom/10.6/usr/lib, because the existence of this file
-will confuse 'configure': it will erroneously assume you have the complete
-TCP/IP development kit (with headers) and will enable compiling of the
-network-related VFS code (not only tarfs).
-[A patch would be required in the configure-script to check the existence
-of the TCP/IP-related headers also...]
-
-Use '--disable-nls' option, if you don't have the binary utilities of
-GNU 'gettext' package (e.g. 'msgfmt'). ['--with-included-gettext' doesn't
-really work in 4.1.33, there are configuration/compiling problems...]
-
-1.3 Compiler
-------------
-
-It is advised to use Watcom C 10.6+ to compile the source, because older
-compilers (e.g. 9.52) do not support some convenient/required features.
-[e.g. 'ar'-compatible 'wlib',...]
-
-1.4 "No prototype found for '<function>'" warnings
---------------------------------------------------
-
-It is advised to use high warning level (e.g. 'CFLAGS="-w4" ./configure'),
-when compiling the source, because Watcom C uses a special parameter passing
-convention for functions with fixed number of arguments only. So if the
-compiler doesn't see the correct prototype of a function with variable
-number of arguments (like printf()), it will produce a warning about the
-missing prototype, but generates function call code according to the special
-parameter passing convention, not the required CDECL convention (it is used
-by default for functions with variable number of arguments). So the calling
-convention of the function call code and the function code itself will not
-match! So you MUST provide the correct prototype for function with variable
-number of arguments! (Or you can force using the stack-based calling
-convention as a default, if you have the stack-call-conv version of all of the
-required libraries ('<name>3s.lib')...[Watcom C 10.6 required!])
-
-[The latest release version (4.1.33/qnx) is checked against these types of
-missing prototypes...]
-
-1.5 Tested configuration
-------------------------
-
-QNX 4.24
-Watcom C 10.6 (release version, no newer beta patches)
-Photon 1.12
-no TCP/IP development kit (-> VFS: tarfs only!)
-mc-4.1.33, mc-4.1.34
-
-2. Running 'mc' under QNX
--------------------------
-
-Using 'qnx*' terminals:
-
-  You cannot use your keyboard correctly, if you disable the "Full 8 bits
-  input" feature in the 'Options|Display bits...' dialog.
-
-  On 'qnx*' terminals 'mc' will run in black and white mode by default,
-  because these types of terminals use non-ANSI-compatible color sequences.
-
-Accessing remote nodes via the native QNX-network:
-
-  [The problem exists under the older versions of 'mc' only...]
-  If directory panels cannot handle '//<node-id>' prefix in directory names,
-  use directory links in order to access remote nodes on the native QNX
-  network:
-
-        mkdir /net
-        ln -sf //1/ /net/1
-        ...
-
-Extension and menu files:
-
-  Default 'tar' uses 'stderr' (and not 'stdout' as its 'normal' output with
-  '-t' option.
-  
-  Default 'tar' is not a GNU 'tar', so does not understand '-z' option.
-
-Special key-mappings:
-
-  Restrictions of the META-? as Alt-? functionality:
-  [META-? as ESC-? will always work!!!]
-
-    Alt-TAB   -> Ctrl-TAB    (Alt-TAB reserved in Photon [1.12+])
-    Alt-ENTER -> Ctrl-ENTER  ('qnx*' terminals only)
-  
-    Alt-<uppercase letter>: doesn't work
-
-'qansi*' terminals:
-
-  Problem [QNX 4.23+ only]: screen corruption (strange line-drawing character
-  set handling) on 'qansi*' terminals, if linked with mc/Slang/terminfo
-  terminal management. (Older versions of QNX and Slang/termcap not affected.)
-
-  This problem is solved, see the comments in slang/sldisply.c about
-  SLTT_TRANSP_ACS_PATCH and QNX_QANSI_SLANG_COMPAT_ACS!
-
-other terminals:
-
-  I have tested 'mc' under QNX on 'qnx*' and 'qansi*' terminals only. 
-  
-toggle panels on/off (CTRL-o):
-
-  Currently not supported, but could be implemented later...
-
-3. List of modifications on mc-4.1.33/mc-4.1.34
------------------------------------------------
-
-edit/
-
- syntax.c: (4.1.33 only, fixed in 4.1.34)
-
-   line 100,191: WCC 10.6 doesn't like "<label>: }" construct ("no statement
-   after the label"), modified to "<label>: /*nop*/; }".
-
-lib/
-
-  mc.menu:
-
-    'Z' on 'tar.Z' and 'tar.z' files: '%f' -> '$1'.
-
-  mc.ext.in.qnx.diff:
-
-    QNX: modified 'mc.ext.in'. [tar -t: output to stderr,...]
-    
-    (No automatic install implemented: patch must be applied before
-    running 'configure' [->mc.ext.in.qnx.diff!]; this patch can be not
-    only QNX-specific...) 
-
-  Makefile.in:
-
-    'mc.ext.in.qnx.diff' added to DISTLIB.
-
-slang/
-
-  sldisply.c:
-
-    SLTT_TRANSP_ACS_PATCH dependent code:
-
-    The problem: some terminals (e.g. QNX/qansi*) map the whole upper half of
-    the ASCII table to the lower half, when alt-char-set is activated with
-    the smacs/as string-sequence. This means, that if 0 <= ch < 128 written
-    to the terminal, it will be translated to (ch+128) automatically by the
-    terminal: so not only the line-drawing characters can be written, when
-    the alt-char-set is activated. It implicitly means, that space, NL, CR,
-    etc. characters (exactly: anything besides the "standard" line drawing
-    characters) cannot be written directly to the terminal, when the
-    alt-char-set is activated, because writing these characters doesn't cause
-    an implicit/temporary switching-back to the standard char-set!
-   
-    The original code in SLang assumes that space, NL, CR, etc. can be
-    printed when alt-char-set is activated. If SLTT_TRANSP_ACS_PATCH is
-    defined, the modified code will not use this assumption.
-    [Remark: the patch-code is not the most exact solution, but works...]
-
-    QNX_QANSI_SLANG_COMPAT_ACS_PATCH dependent code:
-
-    A more OS/terminal-specific solution for the problem mentioned above
-    (->SLTT_TRANSP_ACS_PATCH).
-  
-    If QNX_QANSI_SLANG_COMPAT_ACS is defined, the default smacs/sa, rmacs/ae,
-    acsc/ac [and sgr/sa, if it would be used!] command sequences will be
-    replaced internally with the "old style" (pre-QNX 4.23) sequences in case
-    of QNX/qansi terminals. Using these optional command sequences the terminal
-    remains compatible with the original SLang code (without using the
-    workaround-code enabled by defining SLTT_TRANSP_ACS_PATCH).
-   
-    Remark:
-
-    Currently SLTT_TRANSP_ACS_PATCH is not auto-configured by 'configure'.
-    (Must be manually defined...)
-
-    There is some (QNX-specific) auto-configuration hand-coded in the source:
-
-        #ifdef SLTT_TRANSP_ACS_PATCH
-        # if defined(__QNX__) && defined(QNX_QANSI_SLANG_COMPAT_ACS)
-        #  undef SLTT_TRANSP_ACS_PATCH
-        # endif
-        #else
-        # if defined(__QNX__) && !defined(QNX_QANSI_SLANG_COMPAT_ACS)
-        #  define QNX_QANSI_SLANG_COMPAT_ACS 1
-        # endif
-        #endif
-
-  slutty.c:
-
-    "newtty.c_iflag &= ~(ECHO | INLCR | ICRNL);"
-
-    ECHO(0x08) is a c_lflag bit, it means PARMRK(0x08) in c_iflag. (!?!)
-
-src/
-
-  file.c:
-
-    'do_reget' can be extern if (ENABLE_VFS && USE_NETCODE), not if (ENABLE_VFS).
-
-  find.c:
-
-    search_content():
-    
-    variable 'i' "must be" 'int', not 'char'. ["i == -1": (buggy?) WCC 10.6
-    doesn't convert automatically (int)(-1) to (char)(-1) (GCC does), so
-    "comparison result always 0" warning produced. It is cleaner to define
-    'i' as 'int', than cast '-1' to 'char', because 'read()' returns 'int'.]
-    
-  key.c:
-
-    init_key():
-
-    Call load_xtra_key_defines() and clear 'use_8th_bit_as_meta' by default
-    under QNX, if a 'qnx*' terminal detected. (A saved config file (mc.ini)
-    can override it later...)
-
-  key.h:
-
-    Declare load_xtra_key_defines().
-
-  keyxdef.c:
-
-    Provides a method to define some platform-specific additional key
-    mappings. (e.g. QNX terminals can handle most of META-? combinations as
-    ALT-?...)
-    
-    (Currently not listed in doc/FILES...)
-
-  layout.c:
-
-    TIOCGWINSZ must be available (<sys/ioctl.h> included), because window-
-    resizing code doesn't work, if not defined.
-
-  main.c:
-
-    print_usage(): reserved name in the QNX run-time library!
-    print_usage() -> print_mc_usage()
-
-  mouse.c:
-
-    QNX: ncurses 1.9.8a ported to QNX doesn't provide the 'SP' pointer as a
-    global symbol in the library, so the keyok() emulation currently cannot
-    be used under QNX (4.24 & Watcom C 10.6 release version).
-
-  slint.c:
-
-    QNX: 'qansi*' terminals added to the color_terminals[] list.
-    
-  subshell.c:
-  utilunix.c:
-
-    QNX: include <unix.h> to get prototype for exec*()!!!
-    [See README.QNX/Section 1.4!]
-    
-  Makefile.in:
-
-    'keyxdef' module added to SRCS and OBJS.
-
-vfs/
-
-<mc-src-root>/
-
-  README.QNX:
-
-    QNX-specific notes...
-  
-  configure (line 3369):
-  configure.in (line 88):
-
-    (mc-4.1.34 only)
-    'test x$CCOPTS = x;' => 'test "x$CCOPTS" = x;'
-
-  Makefile.in:
-
-    README.QNX added to DISTMAIN.
-    
-4. TODO
--------
-
-Because of limited time and resources now I can define a 'wish list' only:
-(maybe somebody in the QNX community can help...)
-
-subshell support with panel switch on/off ?
-mouse under Photon (with qnxm, qansi-m terminals) ?
-...
-
-5. Contact information
-----------------------
-
-Please report QNX-specific bugs and comments via e-mail to: gt_cosy@usa.net
-
-
--------------
-Tamasi Gyorgy
--------------