mirror of
https://github.com/proski/madwifi
synced 2024-11-21 22:11:32 +03:00
4ab91bd2bf
git-svn-id: http://madwifi-project.org/svn/madwifi/trunk@3796 0192ed92-7a03-0410-a25b-9323aeb14dbd
53 lines
2.0 KiB
Plaintext
53 lines
2.0 KiB
Plaintext
2007-10-11 Benoit PAPILLAULT <benoit.papillault@free.fr>
|
|
|
|
Conformance testing to the following standards:
|
|
* ETSI 301 893 v1.4.1 (dated 2007-07)
|
|
* FCC
|
|
* IEEE 802.11h-2003 (dated 2003-10-14)
|
|
|
|
ETSI and FCC defines the regulation constraints and defines several roles :
|
|
* "master"
|
|
* "slave without radar detection"
|
|
* "slave with radar detection"
|
|
|
|
Frequencies & channels where DFS is applicable:
|
|
* ETSI : 5250-5350MHz , 5470-5725MHz
|
|
* IEEE 802.11 center frequencies :
|
|
5260, 5280, 5300, 5320
|
|
5500, 5520, 5540, 5560, 5580, 5600, 5620, 5640, 5660, 5680, 5700
|
|
* IEEE 802.11 channels :
|
|
52, 56, 60, 64
|
|
100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
|
|
|
|
Simulating a radar pulse:
|
|
echo "<tsf> <rssi> <width>" > /proc/sys/dev/wifi0/radar_pulse
|
|
|
|
Simulating a radar detected event:
|
|
iwpriv wlan0 doth_radar
|
|
|
|
== Notes on DFS in various modes ==
|
|
|
|
A VAP interface can be used in several modes:
|
|
* IEEE80211_M_STA "sta" : DFS is implemented as "slave"
|
|
* IEEE80211_M_IBSS "adhoc" : DFS is implemented as "master"
|
|
* IEEE80211_M_AHDEMO "ahdemo" : DFS is implemented as "master"
|
|
* IEEE80211_M_HOSTAP "ap" : DFS is implemented as "master"
|
|
* IEEE80211_M_MONITOR "monitor" : DFS is not implemented
|
|
* IEEE80211_M_WDS "wds" : DFS is implemented as "master"
|
|
|
|
== Implementation notes ==
|
|
|
|
sc->sc_curchan.privFlags & CHANNEL_DFS is set if ETSI/FCC compliance is
|
|
required by regulation. It does not mean that 802.11h is required. This flag
|
|
is automatically adjusted by ath_radar_correct_dfs_flags() according to the
|
|
regulation for the specified frequency.
|
|
|
|
ic->ic_flags & IEEE80211_F_DOTH is set if IEEE 802.11h is required. It matches
|
|
dot11SpectrumManagementRequired as described in IEEE 802.11h. Default value is
|
|
1 and can be changed at anytime by the user through iwpriv.
|
|
|
|
ETSI/FCC mechanisms (Channel Availability Check, In-Service Monitoring, Channel
|
|
Shutdown, Non-Occupancy Period) and IEEE 802.11h magnums (Selecting and
|
|
advertising a new channel, ...) are implemented ONLY if both flags are set.
|
|
|