mirrors/madwifi
1
0
Fork 0
mirror of https://github.com/proski/madwifi synced 2024-11-22 14:31:22 +03:00
Code Issues Packages Projects Releases Wiki Activity
1988f5f45e
madwifi/ath_hal/ah_internal.h
proski ec2664e900 Make ath_hal_eepromDetach() safer 
Check that AH_PRIVATE(_ah)->ah_eepromDetach is not NULL before calling
it.  This fixes kernel oops in case if the attach function for the chip
fails before EEPROM support initialization and calls the corresponding
detach function.


git-svn-id: http://madwifi-project.org/svn/madwifi/trunk@3991 0192ed92-7a03-0410-a25b-9323aeb14dbd
2009-04-08 22:25:50 +00:00

795 lines
26 KiB
C
Raw Blame History

/*
* Copyright (c) 2002-2008 Sam Leffler, Errno Consulting
* Copyright (c) 2002-2008 Atheros Communications, Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
* $FreeBSD$
*/
#ifndef _ATH_AH_INTERAL_H_
#define _ATH_AH_INTERAL_H_
/*
* Atheros Device Hardware Access Layer (HAL).
*
* Internal definitions.
*/
#define AH_NULL 0
#define AH_MIN(a,b) ((a)<(b)?(a):(b))
#define AH_MAX(a,b) ((a)>(b)?(a):(b))
#ifndef NBBY
#define NBBY 8 /* number of bits/byte */
#endif
#ifndef roundup
#define roundup(x, y) ((((x)+((y)-1))/(y))*(y)) /* to any y */
#endif
#ifndef howmany
#define howmany(x, y) (((x)+((y)-1))/(y))
#endif
#ifndef offsetof
#define offsetof(type, field) ((size_t)(&((type *)0)->field))
#endif
typedef struct {
uint16_t start; /* first register */
uint16_t end; /* ending register or zero */
} HAL_REGRANGE;
/*
* Transmit power scale factor.
*
* NB: This is not public because we want to discourage the use of
* scaling; folks should use the tx power limit interface.
*/
typedef enum {
HAL_TP_SCALE_MAX = 0, /* no scaling (default) */
HAL_TP_SCALE_50 = 1, /* 50% of max (-3 dBm) */
HAL_TP_SCALE_25 = 2, /* 25% of max (-6 dBm) */
HAL_TP_SCALE_12 = 3, /* 12% of max (-9 dBm) */
HAL_TP_SCALE_MIN = 4, /* min, but still on */
} HAL_TP_SCALE;
typedef enum {
HAL_CAP_RADAR = 0, /* Radar capability */
HAL_CAP_AR = 1, /* AR capability */
} HAL_PHYDIAG_CAPS;
/*
* Each chip or class of chips registers to offer support.
*/
struct ath_hal_chip {
const char *name;
const char *(*probe)(uint16_t vendorid, uint16_t devid);
struct ath_hal *(*attach)(uint16_t devid, HAL_SOFTC,
HAL_BUS_TAG, HAL_BUS_HANDLE, HAL_STATUS *error);
};
#ifndef AH_CHIP
#define AH_CHIP(_name, _probe, _attach) \
static struct ath_hal_chip _name##_chip = { \
.name = __STRING(_name), \
.probe = _probe, \
.attach = _attach \
}; \
OS_DATA_SET(ah_chips, _name##_chip)
#endif
/*
* Each RF backend registers to offer support; this is mostly
* used by multi-chip 5212 solutions. Single-chip solutions
* have a fixed idea about which RF to use.
*/
struct ath_hal_rf {
const char *name;
HAL_BOOL (*probe)(struct ath_hal *ah);
HAL_BOOL (*attach)(struct ath_hal *ah, HAL_STATUS *ecode);
};
#ifndef AH_RF
#define AH_RF(_name, _probe, _attach) \
static struct ath_hal_rf _name##_rf = { \
.name = __STRING(_name), \
.probe = _probe, \
.attach = _attach \
}; \
OS_DATA_SET(ah_rfs, _name##_rf)
#endif
struct ath_hal_rf *ath_hal_rfprobe(struct ath_hal *ah, HAL_STATUS *ecode);
/*
* Internal form of a HAL_CHANNEL. Note that the structure
* must be defined such that you can cast references to a
* HAL_CHANNEL so don't shuffle the first two members.
*/
typedef struct {
uint32_t channelFlags;
uint16_t channel; /* NB: must be first for casting */
uint8_t privFlags;
int8_t maxRegTxPower;
int8_t maxTxPower;
int8_t minTxPower; /* as above... */
HAL_BOOL bssSendHere;
uint8_t gainI;
HAL_BOOL iqCalValid;
uint8_t calValid; /* bitmask of cal types */
int8_t iCoff;
int8_t qCoff;
int16_t rawNoiseFloor;
int16_t noiseFloorAdjust;
int8_t antennaMax;
uint32_t regDmnFlags; /* Flags for channel use in reg */
uint32_t conformanceTestLimit; /* conformance test limit from reg domain */
uint16_t mainSpur; /* cached spur value for this cahnnel */
} HAL_CHANNEL_INTERNAL;
typedef struct {
uint32_t halChanSpreadSupport : 1,
halSleepAfterBeaconBroken : 1,
halCompressSupport : 1,
halBurstSupport : 1,
halFastFramesSupport : 1,
halChapTuningSupport : 1,
halTurboGSupport : 1,
halTurboPrimeSupport : 1,
halMicAesCcmSupport : 1,
halMicCkipSupport : 1,
halMicTkipSupport : 1,
halTkipMicTxRxKeySupport : 1,
halCipherAesCcmSupport : 1,
halCipherCkipSupport : 1,
halCipherTkipSupport : 1,
halPSPollBroken : 1,
halVEOLSupport : 1,
halBssIdMaskSupport : 1,
halMcastKeySrchSupport : 1,
halTsfAddSupport : 1,
halChanHalfRate : 1,
halChanQuarterRate : 1,
halHTSupport : 1,
halRfSilentSupport : 1,
halHwPhyCounterSupport : 1,
halWowSupport : 1,
halWowMatchPatternExact : 1,
halAutoSleepSupport : 1,
halFastCCSupport : 1,
halBtCoexSupport : 1;
uint32_t halRxStbcSupport : 1,
halTxStbcSupport : 1,
halGTTSupport : 1,
halCSTSupport : 1,
halRifsRxSupport : 1,
halRifsTxSupport : 1,
halExtChanDfsSupport : 1,
halForcePpmSupport : 1,
halEnhancedPmSupport : 1,
halMbssidAggrSupport : 1;
uint32_t halWirelessModes;
uint16_t halTotalQueues;
uint16_t halKeyCacheSize;
uint16_t halLow5GhzChan, halHigh5GhzChan;
uint16_t halLow2GhzChan, halHigh2GhzChan;
int halTstampPrecision;
int halRtsAggrLimit;
uint8_t halTxChainMask;
uint8_t halRxChainMask;
uint8_t halNumGpioPins;
uint8_t halNumAntCfg2GHz;
uint8_t halNumAntCfg5GHz;
} HAL_CAPABILITIES;
/*
* The ``private area'' follows immediately after the ``public area''
* in the data structure returned by ath_hal_attach. Private data are
* used by device-independent code such as the regulatory domain support.
* In general, code within the HAL should never depend on data in the
* public area. Instead any public data needed internally should be
* shadowed here.
*
* When declaring a device-specific ath_hal data structure this structure
* is assumed to at the front; e.g.
*
* struct ath_hal_5212 {
* struct ath_hal_private ah_priv;
* ...
* };
*
* It might be better to manage the method pointers in this structure
* using an indirect pointer to a read-only data structure but this would
* disallow class-style method overriding.
*/
struct ath_hal_private {
struct ath_hal h; /* public area */
/* NB: all methods go first to simplify initialization */
HAL_BOOL (*ah_getChannelEdges)(struct ath_hal*,
uint16_t channelFlags,
uint16_t *lowChannel, uint16_t *highChannel);
u_int (*ah_getWirelessModes)(struct ath_hal*);
HAL_BOOL (*ah_eepromRead)(struct ath_hal *, u_int off,
uint16_t *data);
HAL_BOOL (*ah_eepromWrite)(struct ath_hal *, u_int off,
uint16_t data);
HAL_BOOL (*ah_gpioCfgOutput)(struct ath_hal *, uint32_t gpio);
HAL_BOOL (*ah_gpioCfgInput)(struct ath_hal *, uint32_t gpio);
uint32_t (*ah_gpioGet)(struct ath_hal *, uint32_t gpio);
HAL_BOOL (*ah_gpioSet)(struct ath_hal *,
uint32_t gpio, uint32_t val);
void (*ah_gpioSetIntr)(struct ath_hal*, u_int, uint32_t);
HAL_BOOL (*ah_getChipPowerLimits)(struct ath_hal *,
HAL_CHANNEL *, uint32_t);
int16_t (*ah_getNfAdjust)(struct ath_hal *,
const HAL_CHANNEL_INTERNAL*);
void (*ah_getNoiseFloor)(struct ath_hal *,
int16_t nfarray[]);
void *ah_eeprom; /* opaque EEPROM state */
uint16_t ah_eeversion; /* EEPROM version */
void (*ah_eepromDetach)(struct ath_hal *);
HAL_STATUS (*ah_eepromGet)(struct ath_hal *, int, void *);
HAL_BOOL (*ah_eepromSet)(struct ath_hal *, int, int);
uint16_t (*ah_getSpurChan)(struct ath_hal *, int, HAL_BOOL);
HAL_BOOL (*ah_eepromDiag)(struct ath_hal *, int request,
const void *args, uint32_t argsize,
void **result, uint32_t *resultsize);
/*
* Device revision information.
*/
uint16_t ah_devid; /* PCI device ID */
uint16_t ah_subvendorid; /* PCI subvendor ID */
uint32_t ah_macVersion; /* MAC version id */
uint16_t ah_macRev; /* MAC revision */
uint16_t ah_phyRev; /* PHY revision */
uint16_t ah_analog5GhzRev; /* 2GHz radio revision */
uint16_t ah_analog2GhzRev; /* 5GHz radio revision */
uint8_t ah_ispcie; /* PCIE, special treatment */
HAL_OPMODE ah_opmode; /* operating mode from reset */
HAL_CAPABILITIES ah_caps; /* device capabilities */
uint32_t ah_diagreg; /* user-specified AR_DIAG_SW */
int16_t ah_powerLimit; /* tx power cap */
uint16_t ah_maxPowerLevel; /* calculated max tx power */
u_int ah_tpScale; /* tx power scale factor */
uint32_t ah_11nCompat; /* 11n compat controls */
/*
* State for regulatory domain handling.
*/
HAL_REG_DOMAIN ah_currentRD; /* Current regulatory domain */
HAL_CTRY_CODE ah_countryCode; /* current country code */
HAL_CHANNEL_INTERNAL ah_channels[256]; /* calculated channel list */
u_int ah_nchan; /* valid channels in list */
HAL_CHANNEL_INTERNAL *ah_curchan; /* current channel */
uint8_t ah_coverageClass; /* coverage class */
HAL_BOOL ah_regdomainUpdate; /* regdomain is updated? */
/*
* RF Silent handling; setup according to the EEPROM.
*/
uint16_t ah_rfsilent; /* GPIO pin + polarity */
HAL_BOOL ah_rfkillEnabled; /* enable/disable RfKill */
/*
* Diagnostic support for discriminating HIUERR reports.
*/
uint32_t ah_fatalState[6]; /* AR_ISR+shadow regs */
int ah_rxornIsFatal; /* how to treat HAL_INT_RXORN */
};
#define AH_PRIVATE(_ah) ((struct ath_hal_private *)(_ah))
#define ath_hal_getChannelEdges(_ah, _cf, _lc, _hc) \
AH_PRIVATE(_ah)->ah_getChannelEdges(_ah, _cf, _lc, _hc)
#define ath_hal_getWirelessModes(_ah) \
AH_PRIVATE(_ah)->ah_getWirelessModes(_ah)
#define ath_hal_eepromRead(_ah, _off, _data) \
AH_PRIVATE(_ah)->ah_eepromRead(_ah, _off, _data)
#define ath_hal_eepromWrite(_ah, _off, _data) \
AH_PRIVATE(_ah)->ah_eepromWrite(_ah, _off, _data)
#define ath_hal_gpioCfgOutput(_ah, _gpio) \
AH_PRIVATE(_ah)->ah_gpioCfgOutput(_ah, _gpio)
#define ath_hal_gpioCfgInput(_ah, _gpio) \
AH_PRIVATE(_ah)->ah_gpioCfgInput(_ah, _gpio)
#define ath_hal_gpioGet(_ah, _gpio) \
AH_PRIVATE(_ah)->ah_gpioGet(_ah, _gpio)
#define ath_hal_gpioSet(_ah, _gpio, _val) \
AH_PRIVATE(_ah)->ah_gpioGet(_ah, _gpio, _val)
#define ath_hal_gpioSetIntr(_ah, _gpio, _ilevel) \
AH_PRIVATE(_ah)->ah_gpioSetIntr(_ah, _gpio, _ilevel)
#define ath_hal_getpowerlimits(_ah, _chans, _nchan) \
AH_PRIVATE(_ah)->ah_getChipPowerLimits(_ah, _chans, _nchan)
#define ath_hal_getNfAdjust(_ah, _c) \
AH_PRIVATE(_ah)->ah_getNfAdjust(_ah, _c)
#define ath_hal_getNoiseFloor(_ah, _nfArray) \
AH_PRIVATE(_ah)->ah_getNoiseFloor(_ah, _nfArray)
#define ath_hal_configPCIE(_ah, _reset) \
(_ah)->ah_configPCIE(_ah, _reset)
#define ath_hal_disablePCIE(_ah) \
(_ah)->ah_disablePCIE(_ah)
#define ath_hal_eepromDetach(_ah) do { \
if (AH_PRIVATE(_ah)->ah_eepromDetach) \
AH_PRIVATE(_ah)->ah_eepromDetach(_ah); \
} while (0)
#define ath_hal_eepromGet(_ah, _param, _val) \
AH_PRIVATE(_ah)->ah_eepromGet(_ah, _param, _val)
#define ath_hal_eepromSet(_ah, _param, _val) \
AH_PRIVATE(_ah)->ah_eepromSet(_ah, _param, _val)
#define ath_hal_eepromGetFlag(_ah, _param) \
(AH_PRIVATE(_ah)->ah_eepromGet(_ah, _param, AH_NULL) == HAL_OK)
#define ath_hal_getSpurChan(_ah, _ix, _is2G) \
AH_PRIVATE(_ah)->ah_getSpurChan(_ah, _ix, _is2G)
#define ath_hal_eepromDiag(_ah, _request, _a, _asize, _r, _rsize) \
AH_PRIVATE(_ah)->ah_eepromDiag(_ah, _request, _a, _asize, _r, _rsize)
#if !defined(_NET_IF_IEEE80211_H_) && !defined(_NET80211__IEEE80211_H_)
/*
* Stuff that would naturally come from _ieee80211.h
*/
#define IEEE80211_ADDR_LEN 6
#define IEEE80211_WEP_KEYLEN 5 /* 40bit */
#define IEEE80211_WEP_IVLEN 3 /* 24bit */
#define IEEE80211_WEP_KIDLEN 1 /* 1 octet */
#define IEEE80211_WEP_CRCLEN 4 /* CRC-32 */
#define IEEE80211_CRC_LEN 4
#define IEEE80211_MTU 1500
#define IEEE80211_MAX_LEN (2300 + IEEE80211_CRC_LEN + \
(IEEE80211_WEP_IVLEN + IEEE80211_WEP_KIDLEN + IEEE80211_WEP_CRCLEN))
enum {
IEEE80211_T_DS, /* direct sequence spread spectrum */
IEEE80211_T_FH, /* frequency hopping */
IEEE80211_T_OFDM, /* frequency division multiplexing */
IEEE80211_T_TURBO, /* high rate DS */
IEEE80211_T_HT, /* HT - full GI */
};
#define IEEE80211_T_CCK IEEE80211_T_DS /* more common nomenclatur */
#endif /* _NET_IF_IEEE80211_H_ */
/* NB: these are defined privately until XR support is announced */
enum {
ATHEROS_T_XR = IEEE80211_T_HT+1, /* extended range */
};
#define HAL_TXQ_USE_LOCKOUT_BKOFF_DIS 0x00000001
#define INIT_AIFS 2
#define INIT_CWMIN 15
#define INIT_CWMIN_11B 31
#define INIT_CWMAX 1023
#define INIT_SH_RETRY 10
#define INIT_LG_RETRY 10
#define INIT_SSH_RETRY 32
#define INIT_SLG_RETRY 32
typedef struct {
uint32_t tqi_ver; /* HAL TXQ verson */
HAL_TX_QUEUE tqi_type; /* hw queue type*/
HAL_TX_QUEUE_SUBTYPE tqi_subtype; /* queue subtype, if applicable */
HAL_TX_QUEUE_FLAGS tqi_qflags; /* queue flags */
uint32_t tqi_priority;
uint32_t tqi_aifs; /* aifs */
uint32_t tqi_cwmin; /* cwMin */
uint32_t tqi_cwmax; /* cwMax */
uint16_t tqi_shretry; /* frame short retry limit */
uint16_t tqi_lgretry; /* frame long retry limit */
uint32_t tqi_cbrPeriod;
uint32_t tqi_cbrOverflowLimit;
uint32_t tqi_burstTime;
uint32_t tqi_readyTime;
uint32_t tqi_physCompBuf;
uint32_t tqi_intFlags; /* flags for internal use */
} HAL_TX_QUEUE_INFO;
extern HAL_BOOL ath_hal_setTxQProps(struct ath_hal *ah,
HAL_TX_QUEUE_INFO *qi, const HAL_TXQ_INFO *qInfo);
extern HAL_BOOL ath_hal_getTxQProps(struct ath_hal *ah,
HAL_TXQ_INFO *qInfo, const HAL_TX_QUEUE_INFO *qi);
typedef enum {
HAL_ANI_PRESENT, /* is ANI support present */
HAL_ANI_NOISE_IMMUNITY_LEVEL, /* set level */
HAL_ANI_OFDM_WEAK_SIGNAL_DETECTION, /* enable/disable */
HAL_ANI_CCK_WEAK_SIGNAL_THR, /* enable/disable */
HAL_ANI_FIRSTEP_LEVEL, /* set level */
HAL_ANI_SPUR_IMMUNITY_LEVEL, /* set level */
HAL_ANI_MODE = 6, /* 0 => manual, 1 => auto (XXX do not change) */
HAL_ANI_PHYERR_RESET, /* reset phy error stats */
} HAL_ANI_CMD;
#define HAL_SPUR_VAL_MASK 0x3FFF
#define HAL_SPUR_CHAN_WIDTH 87
#define HAL_BIN_WIDTH_BASE_100HZ 3125
#define HAL_BIN_WIDTH_TURBO_100HZ 6250
#define HAL_MAX_BINS_ALLOWED 28
/*
* A = 5GHZ|OFDM
* T = 5GHZ|OFDM|TURBO
*
* IS_CHAN_A(T) will return TRUE. This is probably
* not the default behavior we want. We should migrate to a better mask --
* perhaps CHANNEL_ALL.
*
* For now, IS_CHAN_G() masks itself with CHANNEL_108G.
*
*/
#define IS_CHAN_A(_c) (((_c)->channelFlags & CHANNEL_A) == CHANNEL_A)
#define IS_CHAN_B(_c) (((_c)->channelFlags & CHANNEL_B) == CHANNEL_B)
#define IS_CHAN_G(_c) (((_c)->channelFlags & (CHANNEL_108G|CHANNEL_G)) == CHANNEL_G)
#define IS_CHAN_108G(_c)(((_c)->channelFlags & CHANNEL_108G) == CHANNEL_108G)
#define IS_CHAN_T(_c) (((_c)->channelFlags & CHANNEL_T) == CHANNEL_T)
#define IS_CHAN_PUREG(_c) \
(((_c)->channelFlags & CHANNEL_PUREG) == CHANNEL_PUREG)
#define IS_CHAN_TURBO(_c) (((_c)->channelFlags & CHANNEL_TURBO) != 0)
#define IS_CHAN_CCK(_c) (((_c)->channelFlags & CHANNEL_CCK) != 0)
#define IS_CHAN_OFDM(_c) (((_c)->channelFlags & CHANNEL_OFDM) != 0)
#define IS_CHAN_5GHZ(_c) (((_c)->channelFlags & CHANNEL_5GHZ) != 0)
#define IS_CHAN_2GHZ(_c) (((_c)->channelFlags & CHANNEL_2GHZ) != 0)
#define IS_CHAN_PASSIVE(_c) (((_c)->channelFlags & CHANNEL_PASSIVE) != 0)
#define IS_CHAN_HALF_RATE(_c) (((_c)->channelFlags & CHANNEL_HALF) != 0)
#define IS_CHAN_QUARTER_RATE(_c) (((_c)->channelFlags & CHANNEL_QUARTER) != 0)
#define IS_CHAN_IN_PUBLIC_SAFETY_BAND(_c) ((_c) > 4940 && (_c) < 4990)
#define CHANNEL_HT40 (CHANNEL_HT40PLUS | CHANNEL_HT40MINUS)
#define CHANNEL_HT (CHANNEL_HT20 | CHANNEL_HT40)
#define IS_CHAN_HT(_c) (((_c)->channelFlags & CHANNEL_HT) != 0)
#define IS_CHAN_HT20(_c) (((_c)->channelFlags & CHANNEL_HT) == CHANNEL_HT20)
#define IS_CHAN_HT40(_c) (((_c)->channelFlags & CHANNEL_HT40) != 0)
/*
* Deduce if the host cpu has big- or litt-endian byte order.
*/
static __inline__ int
isBigEndian(void)
{
union {
int32_t i;
char c[4];
} u;
u.i = 1;
return (u.c[0] == 0);
}
/* unalligned little endian access */
#define LE_READ_2(p) \
((uint16_t) \
((((const uint8_t *)(p))[0] ) | (((const uint8_t *)(p))[1]<< 8)))
#define LE_READ_4(p) \
((uint32_t) \
((((const uint8_t *)(p))[0] ) | (((const uint8_t *)(p))[1]<< 8) |\
(((const uint8_t *)(p))[2]<<16) | (((const uint8_t *)(p))[3]<<24)))
/*
* Register manipulation macros that expect bit field defines
* to follow the convention that an _S suffix is appended for
* a shift count, while the field mask has no suffix.
*/
#define SM(_v, _f) (((_v) << _f##_S) & (_f))
#define MS(_v, _f) (((_v) & (_f)) >> _f##_S)
#define OS_REG_RMW_FIELD(_a, _r, _f, _v) \
OS_REG_WRITE(_a, _r, \
(OS_REG_READ(_a, _r) &~ (_f)) | (((_v) << _f##_S) & (_f)))
#define OS_REG_SET_BIT(_a, _r, _f) \
OS_REG_WRITE(_a, _r, OS_REG_READ(_a, _r) | (_f))
#define OS_REG_CLR_BIT(_a, _r, _f) \
OS_REG_WRITE(_a, _r, OS_REG_READ(_a, _r) &~ (_f))
/*
* Regulatory domain support.
*/
/*
* Return the max allowed antenna gain based on the current
* regulatory domain.
*/
extern u_int ath_hal_getantennareduction(struct ath_hal *,
HAL_CHANNEL *, u_int twiceGain);
/*
* Return the test group for the specific channel based on
* the current regulator domain.
*/
extern u_int ath_hal_getctl(struct ath_hal *, HAL_CHANNEL *);
/*
* Return whether or not a noise floor check is required
* based on the current regulatory domain for the specified
* channel.
*/
extern u_int ath_hal_getnfcheckrequired(struct ath_hal *, HAL_CHANNEL *);
/*
* Map a public channel definition to the corresponding
* internal data structure. This implicitly specifies
* whether or not the specified channel is ok to use
* based on the current regulatory domain constraints.
*/
extern HAL_CHANNEL_INTERNAL *ath_hal_checkchannel(struct ath_hal *,
const HAL_CHANNEL *);
/* system-configurable parameters */
extern int ath_hal_dma_beacon_response_time; /* in TU's */
extern int ath_hal_sw_beacon_response_time; /* in TU's */
extern int ath_hal_additional_swba_backoff; /* in TU's */
/* wait for the register contents to have the specified value */
extern HAL_BOOL ath_hal_wait(struct ath_hal *, u_int reg,
uint32_t mask, uint32_t val);
/* return the first n bits in val reversed */
extern uint32_t ath_hal_reverseBits(uint32_t val, uint32_t n);
/* printf interfaces */
extern void ath_hal_printf(struct ath_hal *, const char*, ...)
__printflike(2,3);
extern void ath_hal_vprintf(struct ath_hal *, const char*, __va_list)
__printflike(2, 0);
extern const char* ath_hal_ether_sprintf(const uint8_t *mac);
/* allocate and free memory */
extern void *ath_hal_malloc(size_t);
extern void ath_hal_free(void *);
/* common debugging interfaces */
#ifdef AH_DEBUG
#include "ah_debug.h"
extern int ath_hal_debug;
extern void HALDEBUG(struct ath_hal *ah, u_int mask, const char* fmt, ...)
__printflike(3,4);
#else
#define HALDEBUG(_ah, __m, _fmt, ...)
#endif /* AH_DEBUG */
/*
* Register logging definitions shared with ardecode.
*/
#include "ah_decode.h"
/*
* Common assertion interface. Note: it is a bad idea to generate
* an assertion failure for any recoverable event. Instead catch
* the violation and, if possible, fix it up or recover from it; either
* with an error return value or a diagnostic messages. System software
* does not panic unless the situation is hopeless.
*/
#ifdef AH_ASSERT
extern void ath_hal_assert_failed(const char* filename,
int lineno, const char* msg);
#define HALASSERT(_x) do { \
if (!(_x)) { \
ath_hal_assert_failed(__FILE__, __LINE__, #_x); \
} \
} while (0)
#else
#define HALASSERT(_x)
#endif /* AH_ASSERT */
/*
* Convert between microseconds and core system clocks.
*/
extern u_int ath_hal_mac_clks(struct ath_hal *ah, u_int usecs);
extern u_int ath_hal_mac_usec(struct ath_hal *ah, u_int clks);
/*
* Generic get/set capability support. Each chip overrides
* this routine to support chip-specific capabilities.
*/
extern HAL_STATUS ath_hal_getcapability(struct ath_hal *ah,
HAL_CAPABILITY_TYPE type, uint32_t capability,
uint32_t *result);
extern HAL_BOOL ath_hal_setcapability(struct ath_hal *ah,
HAL_CAPABILITY_TYPE type, uint32_t capability,
uint32_t setting, HAL_STATUS *status);
/*
* Diagnostic interface. This is an open-ended interface that
* is opaque to applications. Diagnostic programs use this to
* retrieve internal data structures, etc. There is no guarantee
* that calling conventions for calls other than HAL_DIAG_REVS
* are stable between HAL releases; a diagnostic application must
* use the HAL revision information to deal with ABI/API differences.
*
* NB: do not renumber these, certain codes are publicly used.
*/
enum {
HAL_DIAG_REVS = 0, /* MAC/PHY/Radio revs */
HAL_DIAG_EEPROM = 1, /* EEPROM contents */
HAL_DIAG_EEPROM_EXP_11A = 2, /* EEPROM 5112 power exp for 11a */
HAL_DIAG_EEPROM_EXP_11B = 3, /* EEPROM 5112 power exp for 11b */
HAL_DIAG_EEPROM_EXP_11G = 4, /* EEPROM 5112 power exp for 11g */
HAL_DIAG_ANI_CURRENT = 5, /* ANI current channel state */
HAL_DIAG_ANI_OFDM = 6, /* ANI OFDM timing error stats */
HAL_DIAG_ANI_CCK = 7, /* ANI CCK timing error stats */
HAL_DIAG_ANI_STATS = 8, /* ANI statistics */
HAL_DIAG_RFGAIN = 9, /* RfGain GAIN_VALUES */
HAL_DIAG_RFGAIN_CURSTEP = 10, /* RfGain GAIN_OPTIMIZATION_STEP */
HAL_DIAG_PCDAC = 11, /* PCDAC table */
HAL_DIAG_TXRATES = 12, /* Transmit rate table */
HAL_DIAG_REGS = 13, /* Registers */
HAL_DIAG_ANI_CMD = 14, /* ANI issue command (XXX do not change!) */
HAL_DIAG_SETKEY = 15, /* Set keycache backdoor */
HAL_DIAG_RESETKEY = 16, /* Reset keycache backdoor */
HAL_DIAG_EEREAD = 17, /* Read EEPROM word */
HAL_DIAG_EEWRITE = 18, /* Write EEPROM word */
/* 19 was HAL_DIAG_TXCONT, 20-23 were for radar */
HAL_DIAG_REGREAD = 24, /* Reg reads */
HAL_DIAG_REGWRITE = 25, /* Reg writes */
HAL_DIAG_GET_REGBASE = 26, /* Get register base */
HAL_DIAG_RDWRITE = 27, /* Write regulatory domain */
HAL_DIAG_RDREAD = 28, /* Get regulatory domain */
HAL_DIAG_FATALERR = 29, /* Read cached interrupt state */
HAL_DIAG_11NCOMPAT = 30, /* 11n compatibility tweaks */
HAL_DIAG_ANI_PARAMS = 31, /* ANI noise immunity parameters */
HAL_DIAG_CHECK_HANGS = 32, /* check h/w hangs */
};
enum {
HAL_BB_HANG_DFS = 0x0001,
HAL_BB_HANG_RIFS = 0x0002,
HAL_BB_HANG_RX_CLEAR = 0x0004,
HAL_BB_HANG_UNKNOWN = 0x0080,
HAL_MAC_HANG_SIG1 = 0x0100,
HAL_MAC_HANG_SIG2 = 0x0200,
HAL_MAC_HANG_UNKNOWN = 0x8000,
HAL_BB_HANGS = HAL_BB_HANG_DFS
| HAL_BB_HANG_RIFS
| HAL_BB_HANG_RX_CLEAR
| HAL_BB_HANG_UNKNOWN,
HAL_MAC_HANGS = HAL_MAC_HANG_SIG1
| HAL_MAC_HANG_SIG2
| HAL_MAC_HANG_UNKNOWN,
};
/*
* Device revision information.
*/
typedef struct {
uint16_t ah_devid; /* PCI device ID */
uint16_t ah_subvendorid; /* PCI subvendor ID */
uint32_t ah_macVersion; /* MAC version id */
uint16_t ah_macRev; /* MAC revision */
uint16_t ah_phyRev; /* PHY revision */
uint16_t ah_analog5GhzRev; /* 2GHz radio revision */
uint16_t ah_analog2GhzRev; /* 5GHz radio revision */
} HAL_REVS;
/*
* Argument payload for HAL_DIAG_SETKEY.
*/
typedef struct {
HAL_KEYVAL dk_keyval;
uint16_t dk_keyix; /* key index */
uint8_t dk_mac[IEEE80211_ADDR_LEN];
int dk_xor; /* XOR key data */
} HAL_DIAG_KEYVAL;
/*
* Argument payload for HAL_DIAG_EEWRITE.
*/
typedef struct {
uint16_t ee_off; /* eeprom offset */
uint16_t ee_data; /* write data */
} HAL_DIAG_EEVAL;
typedef struct {
u_int offset; /* reg offset */
uint32_t val; /* reg value */
} HAL_DIAG_REGVAL;
/*
* 11n compatibility tweaks.
*/
#define HAL_DIAG_11N_SERVICES 0x00000003
#define HAL_DIAG_11N_SERVICES_S 0
#define HAL_DIAG_11N_TXSTOMP 0x0000000c
#define HAL_DIAG_11N_TXSTOMP_S 2
typedef struct {
int maxNoiseImmunityLevel; /* [0..4] */
int totalSizeDesired[5];
int coarseHigh[5];
int coarseLow[5];
int firpwr[5];
int maxSpurImmunityLevel; /* [0..7] */
int cycPwrThr1[8];
int maxFirstepLevel; /* [0..2] */
int firstep[3];
uint32_t ofdmTrigHigh;
uint32_t ofdmTrigLow;
int32_t cckTrigHigh;
int32_t cckTrigLow;
int32_t rssiThrLow;
int32_t rssiThrHigh;
int period; /* update listen period */
} HAL_ANI_PARAMS;
extern HAL_BOOL ath_hal_getdiagstate(struct ath_hal *ah, int request,
const void *args, uint32_t argsize,
void **result, uint32_t *resultsize);
/*
* Setup a h/w rate table for use.
*/
extern void ath_hal_setupratetable(struct ath_hal *ah, HAL_RATE_TABLE *rt);
/*
* Common routine for implementing getChanNoise api.
*/
extern int16_t ath_hal_getChanNoise(struct ath_hal *ah, HAL_CHANNEL *chan);
/*
* Initialization support.
*/
typedef struct {
const uint32_t *data;
int rows, cols;
} HAL_INI_ARRAY;
#define HAL_INI_INIT(_ia, _data, _cols) do { \
(_ia)->data = (const uint32_t *)(_data); \
(_ia)->rows = sizeof(_data) / sizeof((_data)[0]); \
(_ia)->cols = (_cols); \
} while (0)
#define HAL_INI_VAL(_ia, _r, _c) \
((_ia)->data[((_r)*(_ia)->cols) + (_c)])
/*
* OS_DELAY() does a PIO READ on the PCI bus which allows
* other cards' DMA reads to complete in the middle of our reset.
*/
#define DMA_YIELD(x) do { \
if ((++(x) % 64) == 0) \
OS_DELAY(1); \
} while (0)
#define HAL_INI_WRITE_ARRAY(ah, regArray, col, regWr) do { \
int r; \
for (r = 0; r < N(regArray); r++) { \
OS_REG_WRITE(ah, (regArray)[r][0], (regArray)[r][col]); \
DMA_YIELD(regWr); \
} \
} while (0)
#define HAL_INI_WRITE_BANK(ah, regArray, bankData, regWr) do { \
int r; \
for (r = 0; r < N(regArray); r++) { \
OS_REG_WRITE(ah, (regArray)[r][0], (bankData)[r]); \
DMA_YIELD(regWr); \
} \
} while (0)
extern int ath_hal_ini_write(struct ath_hal *ah, const HAL_INI_ARRAY *ia,
int col, int regWr);
extern void ath_hal_ini_bank_setup(uint32_t data[], const HAL_INI_ARRAY *ia,
int col);
extern int ath_hal_ini_bank_write(struct ath_hal *ah, const HAL_INI_ARRAY *ia,
const uint32_t data[], int regWr);
#define WLAN_CTRL_FRAME_SIZE (2+2+6+4) /* ACK+FCS */
#endif /* _ATH_AH_INTERAL_H_ */
Reference in New Issue View Git Blame Copy Permalink