mirror of
https://github.com/proski/madwifi
synced 2024-11-26 08:21:26 +03:00
2c0d8db912
git-svn-id: http://madwifi-project.org/svn/madwifi/trunk@2721 0192ed92-7a03-0410-a25b-9323aeb14dbd
170 lines
4.1 KiB
Groff
170 lines
4.1 KiB
Groff
.TH "ATH_INFO" "8" "September 2007" "" ""
|
|
.SH "NAME"
|
|
\fbath_info\fP \- print module version info, write some eeprom fields
|
|
.SH "SYNOPSIS"
|
|
.B ath_info
|
|
[-w [-g N:M]] [-v] [-f] <pci_address> [<field1> <val1> [<field2> <val2> ...]]
|
|
|
|
.SH "DESCRIPTION"
|
|
\fBath_info\fP prints some version information of Atheros WLAN modules. It furthermore
|
|
allows to change regulatory domain and PCI ID fields in the EEPROM.
|
|
.PP
|
|
You must first retrieve the PCI memory address of the module by
|
|
.B lspci -v
|
|
and maybe activate the module by
|
|
.B setpci
|
|
(see example below).
|
|
|
|
\fBDISCLAIMER:\fP Use the write function only if you know what you are doing! There is the chance to
|
|
brick your module.The authors aren't responsible for any damage caused by using this program.
|
|
.PP
|
|
\fB Transmitting on illegal frequencies may violate state laws. Obey the local regulations!\fP
|
|
|
|
.SH "OPTIONS"
|
|
.TP
|
|
.B \-w
|
|
Write to the EEPROM. You need to specify at least one \fBfield value\fP pair (see below).
|
|
.TP
|
|
.B \-g N:M
|
|
Set the GPIO pin N to level M (N=0..5, M=0,1). Only useful with \fB-w\fP.
|
|
\fBath_info\fP sets GPIO 4 to 0 (low) for chipsets newer or equal to 5213 to enable writing to the EEPROM.
|
|
If your module has a different layout, you may need to overwrite this.
|
|
.TP
|
|
.B \-v
|
|
verbose printouts
|
|
.TP
|
|
.B \-f
|
|
force, don't ask before writing to EEPROM (with \fB-w).
|
|
.TP
|
|
.B <pci_address>
|
|
The PCI address of the module. You must retrieve it with \fBlspci\fP.
|
|
.TP
|
|
.B <field> <value>
|
|
Field and value names for EEPROM writing. Possible fields are:
|
|
.B pci_dev_id, pci_vendor_id, pci_class, pci_rev_id, pci_subsys_dev_id, pci_subsys_vendor_id, regdomain
|
|
|
|
.SH "EXAMPLE"
|
|
|
|
Execute the commands below from a root account.
|
|
|
|
Retrieve the module's PCI memory address with \fBlspci\fP:
|
|
.LP
|
|
.NF
|
|
# lspci -v
|
|
0b:00.0 Ethernet controller: Atheros Communications, Inc. AR5211 802.11ab NIC
|
|
(rev 01)
|
|
Subsystem: Standard Microsystems Corp [SMC] Unknown device 2335
|
|
Flags: medium devsel, IRQ 20
|
|
Memory at 6c000000 (32-bit, non-prefetchable) [size=64K]
|
|
Capabilities: [44] Power Management version 2
|
|
|
|
.FI
|
|
|
|
The above card has its memory mapped at 0x6c000000.
|
|
.PP
|
|
If no madwifi driver is running or the module isn't recognized by the
|
|
driver anymore, e.g. due to wrong PCI id values (check your syslog),
|
|
you must manually enable the PCI device with \fBsetpci\fP. The argument to "-s" comes
|
|
from the output above:
|
|
.LP
|
|
.NF
|
|
setpci -s 0b:00.0 command=0x41f cache_line_size=0x10
|
|
|
|
|
|
.PP
|
|
Retrieve some information of the module:
|
|
.LP
|
|
.NF
|
|
# ./ath_info 0x6c000000
|
|
\-==Device Information==\-
|
|
.br
|
|
MAC Version: 5211 (0x40)
|
|
.br
|
|
MAC Revision: 5211 (0x42)
|
|
.br
|
|
5Ghz PHY Revision: 5111 (0x17)
|
|
.br
|
|
2Ghz PHY Revision: 2111 (0x23)
|
|
.br
|
|
-==EEPROM Information==-
|
|
.br
|
|
EEPROM Version: 3.2
|
|
.br
|
|
EEPROM Size: 16K
|
|
.br
|
|
Regulatory Domain: 0x20
|
|
.br
|
|
-==== Capabilities ====-
|
|
.br
|
|
| 802.11a Support: yes |
|
|
.br
|
|
| 802.11b Support: yes |
|
|
.br
|
|
| 802.11g Support: no |
|
|
.br
|
|
| RFKill Support: no |
|
|
.br
|
|
========================
|
|
.FI
|
|
.PP
|
|
Set the regulatory domain to 0. You need to confirm to write with 'y' (-f turns this off).
|
|
Check \fBhttp://madwifi.org/wiki/UserDocs/CountryCode\fP for more information on
|
|
regdomains and country codes:
|
|
.LP
|
|
.NF
|
|
# ./ath_info -w 0x6c000000 regdomain 0
|
|
.br
|
|
-==Device Information==-
|
|
.br
|
|
MAC Version: 5211 (0x40)
|
|
.br
|
|
MAC Revision: 5211 (0x42)
|
|
.br
|
|
5Ghz PHY Revision: 5111 (0x17)
|
|
.br
|
|
2Ghz PHY Revision: 2111 (0x23)
|
|
.br
|
|
-==EEPROM Information==-
|
|
.br
|
|
EEPROM Version: 3.2
|
|
.br
|
|
EEPROM Size: 16K
|
|
.br
|
|
Regulatory Domain: 0x20
|
|
.br
|
|
-==== Capabilities ====-
|
|
.br
|
|
| 802.11a Support: yes |
|
|
.br
|
|
| 802.11b Support: yes |
|
|
.br
|
|
| 802.11g Support: no |
|
|
.br
|
|
| RFKill Support: no |
|
|
.br
|
|
========================
|
|
.br
|
|
GPIO registers: CR 00000000 DO 00000000 DI 00000000
|
|
.br
|
|
regdomain (0x00bf) := 0x0000
|
|
.br
|
|
WARNING: The write function may easy brick your device or
|
|
.br
|
|
violate state regulation on frequency usage.
|
|
.br
|
|
Proceed on your own risk!
|
|
.br
|
|
Shall I write the above value(s)? (y/n)
|
|
.br
|
|
y
|
|
.FI
|
|
|
|
.SH "BUGS"
|
|
|
|
The write function is currently not tested with 5210 devices.
|
|
.PP
|
|
Use at your own risk, entering a false device address will have really
|
|
nasty results!
|
|
.PP
|
|
An invalid magic in the EEPROM will cause \fBath_info\fP to fail.
|