/*- * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting * Copyright (c) 2004-2005 Atheros Communications, Inc. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any * redistribution must be conditioned upon including a substantially * similar Disclaimer requirement for further binary redistribution. * 3. Neither the names of the above-listed copyright holders nor the names * of any contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF * THE POSSIBILITY OF SUCH DAMAGES. * * $Id$ */ #include "opt_ah.h" #ifndef EXPORT_SYMTAB #define EXPORT_SYMTAB #endif #if !defined(AUTOCONF_INCLUDED) && !defined(CONFIG_LOCALVERSION) #include #endif #include #include #include #include #include #include #include #include #include #include #include "if_media.h" #include #include "if_athvar.h" #include "ah_devid.h" #include "if_ath_pci.h" #if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13)) #error Atheros PCI version requires at least Linux kernel version 2.6.13 #endif /* kernel < 2.6.13 */ struct ath_pci_softc { struct ath_softc aps_sc; #ifdef CONFIG_PM u32 aps_pmstate[16]; #endif }; /* * Module glue. */ #include "release.h" static char *version = RELEASE_VERSION; static char *dev_info = "ath_pci"; #include /* * User a static table of PCI IDs for now. While this is the * "new way" to do things, we may want to switch back to having * the HAL check them by defining a probe method. */ static struct pci_device_id ath_pci_id_table[] = { { 0x168c, 0x0007, PCI_ANY_ID, PCI_ANY_ID }, { 0x168c, 0x0012, PCI_ANY_ID, PCI_ANY_ID }, { 0x168c, 0x0013, PCI_ANY_ID, PCI_ANY_ID }, { 0xa727, 0x0013, PCI_ANY_ID, PCI_ANY_ID }, /* 3com */ { 0x10b7, 0x0013, PCI_ANY_ID, PCI_ANY_ID }, /* 3com 3CRDAG675 */ { 0x168c, 0x1014, PCI_ANY_ID, PCI_ANY_ID }, /* IBM minipci 5212 */ { 0x168c, 0x101a, PCI_ANY_ID, PCI_ANY_ID }, /* some Griffin-Lite */ { 0x168c, 0x0015, PCI_ANY_ID, PCI_ANY_ID }, { 0x168c, 0x0016, PCI_ANY_ID, PCI_ANY_ID }, { 0x168c, 0x0017, PCI_ANY_ID, PCI_ANY_ID }, { 0x168c, 0x0018, PCI_ANY_ID, PCI_ANY_ID }, { 0x168c, 0x0019, PCI_ANY_ID, PCI_ANY_ID }, { 0x168c, 0x001a, PCI_ANY_ID, PCI_ANY_ID }, { 0x168c, 0x001b, PCI_ANY_ID, PCI_ANY_ID }, { 0x168c, 0x001c, PCI_ANY_ID, PCI_ANY_ID }, /* PCI Express 5424 */ { 0x168c, 0x001d, PCI_ANY_ID, PCI_ANY_ID }, /* PCI Express ??? */ { 0x168c, 0x0023, PCI_ANY_ID, PCI_ANY_ID }, { 0x168c, 0x0024, PCI_ANY_ID, PCI_ANY_ID }, { 0x168c, 0x0027, PCI_ANY_ID, PCI_ANY_ID }, #if 0 /* PCI based AR9280 doesn't work yet */ { 0x168c, 0x0029, PCI_ANY_ID, PCI_ANY_ID }, /* AR9280 PCI */ #endif { 0x168c, 0x002a, PCI_ANY_ID, PCI_ANY_ID }, /* AR9280 PCI Express */ { 0x168c, 0x9013, PCI_ANY_ID, PCI_ANY_ID }, /* sonicwall */ { } }; static u16 ath_devidmap[][2] = { { 0x9013, 0x0013 } }; static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) { resource_size_t phymem; void __iomem *mem; struct ath_pci_softc *sc; struct net_device *dev; const char *athname; u_int8_t csz; u32 val; u16 vdevice; int i; if (pci_enable_device(pdev)) return -EIO; /* XXX 32-bit addressing only */ if (pci_set_dma_mask(pdev, 0xffffffff)) { printk(KERN_ERR "%s: 32-bit DMA not available\n", dev_info); goto bad; } /* * Cache line size is used to size and align various * structures used to communicate with the hardware. */ pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz); if (csz == 0) { /* * Linux 2.4.18 (at least) writes the cache line size * register as a 16-bit wide register which is wrong. * We must have this setup properly for rx buffer * DMA to work so force a reasonable value here if it * comes up zero. */ csz = L1_CACHE_BYTES / sizeof(u_int32_t); pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz); } /* * The default setting of latency timer yields poor results, * set it to the value used by other systems. It may be worth * tweaking this setting more. */ pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x60); pci_set_master(pdev); /* * Disable the RETRY_TIMEOUT register (0x41) to keep * PCI Tx retries from interfering with C3 CPU state. * * Code taken from ipw2100 driver - jg */ pci_read_config_dword(pdev, 0x40, &val); if ((val & 0x0000ff00) != 0) pci_write_config_dword(pdev, 0x40, val & 0xffff00ff); phymem = pci_resource_start(pdev, 0); if (!request_mem_region(phymem, pci_resource_len(pdev, 0), "ath")) { printk(KERN_ERR "%s: cannot reserve PCI memory region\n", dev_info); goto bad; } mem = ioremap(phymem, pci_resource_len(pdev, 0)); if (!mem) { printk(KERN_ERR "%s: cannot remap PCI memory region\n", dev_info); goto bad1; } dev = alloc_netdev(sizeof(struct ath_pci_softc), "wifi%d", ether_setup); if (dev == NULL) { printk(KERN_ERR "%s: no memory for device state\n", dev_info); goto bad2; } sc = netdev_priv(dev); sc->aps_sc.sc_dev = dev; sc->aps_sc.sc_iobase = mem; /* * Mark the device as detached to avoid processing * interrupts until setup is complete. */ sc->aps_sc.sc_invalid = 1; dev->irq = pdev->irq; SET_MODULE_OWNER(dev); SET_NETDEV_DEV(dev, &pdev->dev); sc->aps_sc.sc_bdev = (void *)pdev; pci_set_drvdata(pdev, dev); if (request_irq(dev->irq, ath_intr, IRQF_SHARED, dev->name, dev)) { printk(KERN_WARNING "%s: request_irq failed\n", dev->name); goto bad3; } /* looking for device type from broken device id */ vdevice = id->device; for (i = 0; i < ARRAY_SIZE(ath_devidmap); i++) { if (id->device == ath_devidmap[i][0]) { vdevice = ath_devidmap[i][1]; break; } } /* * Auto-enable soft led processing for IBM cards and for * 5211 minipci cards. Users can also manually enable/disable * support with a sysctl. */ if (vdevice == AR5212_DEVID_IBM || vdevice == AR5211_DEVID) { sc->aps_sc.sc_softled = 1; sc->aps_sc.sc_ledpin = 0; } /* Enable softled on PIN1 on HP Compaq nc6xx, nc4000 & nx5000 laptops */ if (pdev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ) { sc->aps_sc.sc_softled = 1; sc->aps_sc.sc_ledpin = 1; } if (ath_attach(vdevice, dev, NULL) != 0) goto bad4; athname = ath_hal_probe(id->vendor, vdevice); printk(KERN_INFO "%s: %s: %s: mem=0x%llx, irq=%d\n", dev_info, dev->name, athname ? athname : "Atheros ???", (unsigned long long)phymem, dev->irq); if (vdevice == AR5416_DEVID_PCIE) sc->aps_sc.sc_dmasize_stomp = 1; /* ready to process interrupts */ sc->aps_sc.sc_invalid = 0; return 0; bad4: free_irq(dev->irq, dev); bad3: free_netdev(dev); bad2: iounmap(mem); bad1: release_mem_region(phymem, pci_resource_len(pdev, 0)); bad: pci_disable_device(pdev); return (-ENODEV); } static void ath_pci_remove(struct pci_dev *pdev) { struct net_device *dev = pci_get_drvdata(pdev); struct ath_pci_softc *sc = netdev_priv(dev); ath_detach(dev); if (dev->irq) free_irq(dev->irq, dev); iounmap(sc->aps_sc.sc_iobase); release_mem_region(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0)); pci_disable_device(pdev); free_netdev(dev); } #ifdef CONFIG_PM static int ath_pci_suspend(struct pci_dev *pdev, pm_message_t state) { struct net_device *dev = pci_get_drvdata(pdev); ath_suspend(dev); pci_save_state(pdev); pci_disable_device(pdev); return pci_set_power_state(pdev, PCI_D3hot); } static int ath_pci_resume(struct pci_dev *pdev) { struct net_device *dev = pci_get_drvdata(pdev); u32 val; int err; err = pci_set_power_state(pdev, PCI_D0); if (err) return err; /* XXX - Should this return nonzero on fail? */ pci_restore_state(pdev); err = pci_enable_device(pdev); if (err) return err; pci_set_master(pdev); /* * Suspend/Resume resets the PCI configuration space, so we have to * re-disable the RETRY_TIMEOUT register (0x41) to keep * PCI Tx retries from interfering with C3 CPU state * * Code taken from ipw2100 driver - jg */ pci_read_config_dword(pdev, 0x40, &val); if ((val & 0x0000ff00) != 0) pci_write_config_dword(pdev, 0x40, val & 0xffff00ff); ath_resume(dev); return 0; } #endif /* CONFIG_PM */ MODULE_DEVICE_TABLE(pci, ath_pci_id_table); static struct pci_driver ath_pci_driver = { .name = "ath_pci", .id_table = ath_pci_id_table, .probe = ath_pci_probe, .remove = ath_pci_remove, #ifdef CONFIG_PM .suspend = ath_pci_suspend, .resume = ath_pci_resume, #endif /* CONFIG_PM */ }; int ath_ioctl_ethtool(struct ath_softc *sc, int cmd, void __user *addr) { struct ethtool_drvinfo info; if (cmd != ETHTOOL_GDRVINFO) return -EOPNOTSUPP; memset(&info, 0, sizeof(info)); info.cmd = cmd; strncpy(info.driver, dev_info, sizeof(info.driver) - 1); strncpy(info.version, version, sizeof(info.version) - 1); /* include the device name so later versions of kudzu DTRT */ strncpy(info.bus_info, pci_name((struct pci_dev *)sc->sc_bdev), sizeof(info.bus_info) - 1); return copy_to_user(addr, &info, sizeof(info)) ? -EFAULT : 0; } MODULE_AUTHOR("Errno Consulting, Sam Leffler"); MODULE_DESCRIPTION("Support for Atheros 802.11 wireless LAN cards."); #ifdef MODULE_VERSION MODULE_VERSION(RELEASE_VERSION); #endif MODULE_SUPPORTED_DEVICE("Atheros WLAN cards"); #ifdef MODULE_LICENSE MODULE_LICENSE("Dual BSD/GPL"); #endif static int __init init_ath_pci(void) { int status; ath_sysctl_register(); if ((status = pci_register_driver(&ath_pci_driver))) { ath_sysctl_unregister(); return (status); } return (0); } module_init(init_ath_pci); static void __exit exit_ath_pci(void) { ath_sysctl_unregister(); pci_unregister_driver(&ath_pci_driver); } module_exit(exit_ath_pci); /* return bus cachesize in 4B word units */ void bus_read_cachesize(struct ath_softc *sc, u_int8_t *csz) { pci_read_config_byte(sc->sc_bdev, PCI_CACHE_LINE_SIZE, csz); }