Fix all references to old domain name.

git-svn-id: http://madwifi-project.org/svn/madwifi/trunk@4030 0192ed92-7a03-0410-a25b-9323aeb14dbd

INSTALL

@@ -181,4 +181,4 @@ Further information on how to work with the driver can be found in the
 file README.  In addition, the project's wiki has a lot of valuable
 information:
 
-http://madwifi.org/
+http://madwifi-project.org/

README

@@ -64,7 +64,7 @@ binary-only form it is marked "Proprietary"; this means when you load it
 you will see messages that your system is now "tainted".
 
 A detailed discussion of the pros and cons of this design can be found
-at http://madwifi.org/wiki/HAL
+at http://madwifi-project.org/wiki/HAL
 
 If you wish to use this driver on a platform for which an ath_hal module
 is not already provided please contact the author.  Note that this is
@@ -95,7 +95,7 @@ http://customerproducts.atheros.com/customerproducts
 
 A list of products that have been reported to be supported by MadWifi
 can be found here:
-http://madwifi.org/wiki/Compatibility
+http://madwifi-project.org/wiki/Compatibility
 
 In general, if a device is identified as ``11a only'', it is almost
 certain to contain an Atheros 5210 part in it.  Most retail a+b products
@@ -167,7 +167,7 @@ Autocreation can be disabled:
   modprobe ath_pci autocreate=none
 
 Please see the following link for more information:
-http://madwifi.org/wiki/UserDocs/autocreate
+http://madwifi-project.org/wiki/UserDocs/autocreate
 
 
 Virtual APs (VAPs) and wlanconfig
@@ -257,7 +257,7 @@ summary of all non-zero statistics from the time the driver was loaded.
 By default the ath0 device is used; to override this use the -i option.
 
 A wiki page describes common MadWifi debugging methods here:
-http://madwifi.org/wiki/DevDocs/AthDebug
+http://madwifi-project.org/wiki/DevDocs/AthDebug
 
 
 Security/Crypto Support
@@ -329,7 +329,7 @@ Known Problems
 1. Ad-hoc mode is broken; symptoms are intermittent operation.
 
 Other issues might be mentioned in our ticket tracker:
-http://madwifi.org/report/1
+http://madwifi-project.org/report/1
 
 
 Getting Support
@@ -347,7 +347,7 @@ sending your request (see below).
 We also offer an IRC channel that might be a better help in urgent
 cases.  Learn more about the different ways to get support by visiting:
 
-  http://madwifi.org/wiki/Support
+  http://madwifi-project.org/wiki/Support
 
 When sending a support request or problem report be sure to include the
 version of the driver and the part identification the driver prints to
@@ -376,6 +376,6 @@ Feedback and Contributions
 Reports about reproducible bugs, feature requests and patches should be
 submitted in the form of a trouble ticket:
 
-  http://madwifi.org/newticket
+  http://madwifi-project.org/wiki/TicketSubmissionGuidelines
         
 Fixes and enhancements are encouraged. 

THANKS

@@ -168,14 +168,14 @@ We also would like to thank the following individuals and companies
   1 Wistron DCMA-81 MiniPCI card
   
 * true global communications GmbH, Germany - http://www.tgc.de
-  Free server and bandwidth for madwifi.org
+  Free server and bandwidth for madwifi-project.org
 
 * Voyage, Hong Kong - htt://www.voyage.hk
   1 Senao NMP-8602 Plus MiniPCI card, 2 pigtails and 2 rubber
   antenna
 
 To learn more about donations to our project visit:
-http://madwifi.org/wiki/Donations
+http://madwifi-project.org/wiki/Donations
 
 If you want to support the project this way, please contact us by
-e-mail at donation@madwifi.org.
+e-mail at donation@madwifi-project.org.

ath_rate/minstrel/minstrel.txt

@@ -20,7 +20,8 @@ derived from
 The code released in 2005 had some algorithmic and implementation flaws (one
 of which was that it was based on the old madwifi codebase) and was shown to
 be unstable. Performance of the sample module is poor
-(http://www.madwifi.org/ticket/989), and we have observed similar issues.
+(http://www.madwifi-project.org/ticket/989), and we have observed similar
+issues.
 
 We noted:
 

contrib/madwifi.spec.in

@@ -20,10 +20,10 @@ Version: 0.%{revision}.%{snapshot}
 Release: 6
 License: GPL2
 Group: System Environment/Kernel
-URL: http://madwifi.org
+URL: http://madwifi-project.org
-#Source0: http://snapshots.madwifi.org/%{name}-%{branch}-r%{revision}-%{snapshot}.tar.gz
+#Source0: http://snapshots.madwifi-project.org/%{name}-%{branch}-r%{revision}-%{snapshot}.tar.gz
 # Changes accordingly to the new rule :  madwifi-ng-r<revision>-<generation date>.tar.gz
-Source0: http://snapshots.madwifi.org/madwifi-ng/%{name}-ng-r%{revision}-%{snapshot}.tar.gz
+Source0: http://snapshots.madwifi-project.org/madwifi-ng/%{name}-ng-r%{revision}-%{snapshot}.tar.gz
 BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root
 Requires: /sbin/depmod
 Requires: %{name}-module >= %{version}
@@ -128,6 +128,9 @@ rm -rf %{buildroot}
 
 #
 %changelog
+* Thu May 28 2009  Michael Renzmann <mrenzmann@madwifi-project.org>
+- Update references to project website with new domain
+
 * Wed Dec 14 2005  Patrick Pichon <Patrick.Pichon@laposte.net>
 - Update accordingly to the new file name rule:  madwifi-ng-r<revision>-<generation date>.tar.gz
 - 'branch' tag is not use yet. 'ng' is hardcoded as part of the file name

scripts/make-release.bash

@@ -49,7 +49,7 @@ fi
 check_dir_prereq "RELEASE_TMP"
 check_dir_prereq "RELEASE_STORE"
 
-# caller must have write access to the madwifi.org repository
+# caller must have write access to the madwifi-project.org repository
 valid=0
 repos=$(svn info | grep "Repository Root" | cut -d" " -f3)
 for f in ~/.subversion/auth/svn.simple/*; do

tools/man/80211debug.8

@@ -115,7 +115,7 @@ Set state and assoc bitmaps to  on for ath0.
 Disable state bitmap for ath0.
 .PP
 .SH "SEE ALSO"
-\fBathdebug\fP(8), \fBhttp://madwifi.org/wiki/DevDocs/AthDebug\fP
+\fBathdebug\fP(8), \fBhttp://madwifi-project.org/wiki/DevDocs/AthDebug\fP
 .SH "AUTHOR"
 This manual page was written by Kel Modderman <kelrin@tpg.com.au> and was based
 upon previous text written by Eric S. Raymond.

tools/man/athdebug.8

@@ -94,7 +94,7 @@ Enable rate debug bitmap on wifi0.
 Clear rate bitmap on wifi0.
 .PP
 .SH "SEE ALSO"
-\fB80211debug\fP(8), \fBhttp://madwifi.org/wiki/DevDocs/AthDebug\fP
+\fB80211debug\fP(8), \fBhttp://madwifi-project.org/wiki/DevDocs/AthDebug\fP
 .SH "AUTHOR"
 This manual page was written by Kel Modderman <kelrin@tpg.com.au> and was based
 upon previous text written by Eric S. Raymond.

tools/man/wlanconfig.8

@@ -127,7 +127,7 @@ Scan for local stations and access points.
 .RS 0
 \fBifconfig br0 up
 .RS 7
-\fRCreate a WDS bridge. See http://madwifi.org/ for more information.
+\fRCreate a WDS bridge. See http://madwifi-project.org/ for more information.
 .RS -7
 .PP
 .SH "AUTHOR"

tools/wpakey.c

@@ -1,6 +1,6 @@
 /** WEP/WPA key setting tool for MadWifi driver, version 0.5
  *
- * (C) 2008-03-28 Georg Lukas <georg@madwifi.org>
+ * (C) 2008-03-28 Georg Lukas <georg@madwifi-project.org>
  *
  * This program can be used to debug the MadWifi Key Cache. Use with caution
  * and without warranty!