Fix typos found by codespell

git-svn-id: http://madwifi-project.org/svn/madwifi/trunk@4166 0192ed92-7a03-0410-a25b-9323aeb14dbd
This commit is contained in:
proski 2011-08-26 15:31:01 +00:00
parent 2fc801acdb
commit 5890429464
27 changed files with 38 additions and 38 deletions

View File

@ -2677,7 +2677,7 @@ ath_bmiss_tasklet(TQUEUE_ARG data)
struct ath_softc *sc = netdev_priv(dev);
if (time_before(jiffies, sc->sc_ic.ic_bmiss_guard)) {
/* Beacon miss interrupt occured too short after last beacon
/* Beacon miss interrupt occurred too short after last beacon
* timer configuration. Ignore it as it could be spurious. */
DPRINTF(sc, ATH_DEBUG_ANY, "Beacon miss ignored\n");
} else {
@ -10821,7 +10821,7 @@ ath_distance2timeout(struct ath_softc *sc, int distance)
* being very careful or taking something into account that I can't
* find in the specs.
*
* XXX: Update based on emperical evidence (potentially save 15us per
* XXX: Update based on empirical evidence (potentially save 15us per
* timeout). */
return ath_slottime2timeout(sc, ath_distance2slottime(sc, distance));
}

View File

@ -165,7 +165,7 @@ ath_hw_beacon_stop(struct ath_softc *sc) {
* of beacon timer configuration (which we try to avoid) and due to unlucky
* timing of local TSF updates (triggered by the reception of a beacon with the
* same BSSID - something we can't avoid) the beacon timers can be up updated
* seperately, leaving one of them in the past, not beeing updated until the
* separately, leaving one of them in the past, not beeing updated until the
* timers wrap around. due to the fact that the beacon interval does not fit
* into the timer period (16 bit) a whole number of times the size of the ATIM
* window can get bigger than desired.

View File

@ -701,7 +701,7 @@ struct ath_softc {
unsigned int sc_useintmit:1; /* Interference mitigation enabled? */
unsigned int sc_txcont:1; /* Is continuous transmit enabled? */
unsigned int sc_dfs_testmode:1; /* IF this is on, AP vaps will stay in
* 'channel availability check' indefinately,
* 'channel availability check' indefinitely,
* reporting radar and interference detections. */
unsigned int sc_dmasize_stomp:1; /* Whether to stomp on DMA size. */

View File

@ -151,7 +151,7 @@ ath_hal_computetxtime(struct ath_hal *ah,
kbps = rates->info[rateix].rateKbps;
/*
* index can be invalid duting dynamic Turbo transitions.
* index can be invalid during dynamic Turbo transitions.
*/
if(kbps == 0) return 0;
switch (rates->info[rateix].phy) {

View File

@ -2361,7 +2361,7 @@ IS_BIT_SET(int bit, const uint64_t bitmask[])
return (bitmask[byteOffset] & val) != 0;
}
/* Add given regclassid into regclassids array upto max of maxregids */
/* Add given regclassid into regclassids array up to max of maxregids */
static void
ath_add_regclassid(uint8_t *regclassids, u_int maxregids,
u_int *nregids, uint8_t regclassid)

View File

@ -940,7 +940,7 @@ getNoiseFloorThresh(struct ath_hal *ah, HAL_CHANNEL_INTERNAL *chan, int16_t *nft
}
/*
* Read the NF and check it against the noise floor threshhold
* Read the NF and check it against the noise floor threshold
*
* Returns: TRUE if the NF is good
*/

View File

@ -381,9 +381,9 @@ ar2316getGainBoundariesAndPdadcsForPowers(struct ath_hal *ah, uint16_t channel,
* change pwr_I_0 to signed 5-bits.
*/
int16_t Pmin_t2[MAX_NUM_PDGAINS_PER_CHANNEL];
/* to accomodate -ve power levels later on. */
/* to accommodate -ve power levels later on. */
int16_t Pmax_t2[MAX_NUM_PDGAINS_PER_CHANNEL];
/* to accomodate -ve power levels later on */
/* to accommodate -ve power levels later on */
uint16_t numVpd = 0;
uint16_t Vpd_step;
int16_t tmpVal ;

View File

@ -358,9 +358,9 @@ ar2317getGainBoundariesAndPdadcsForPowers(struct ath_hal *ah, uint16_t channel,
* change pwr_I_0 to signed 5-bits.
*/
int16_t Pmin_t2[MAX_NUM_PDGAINS_PER_CHANNEL];
/* to accomodate -ve power levels later on. */
/* to accommodate -ve power levels later on. */
int16_t Pmax_t2[MAX_NUM_PDGAINS_PER_CHANNEL];
/* to accomodate -ve power levels later on */
/* to accommodate -ve power levels later on */
uint16_t numVpd = 0;
uint16_t Vpd_step;
int16_t tmpVal ;

View File

@ -375,9 +375,9 @@ ar2413getGainBoundariesAndPdadcsForPowers(struct ath_hal *ah, uint16_t channel,
* change pwr_I_0 to signed 5-bits.
*/
int16_t Pmin_t2[MAX_NUM_PDGAINS_PER_CHANNEL];
/* to accomodate -ve power levels later on. */
/* to accommodate -ve power levels later on. */
int16_t Pmax_t2[MAX_NUM_PDGAINS_PER_CHANNEL];
/* to accomodate -ve power levels later on */
/* to accommodate -ve power levels later on */
uint16_t numVpd = 0;
uint16_t Vpd_step;
int16_t tmpVal ;

View File

@ -380,9 +380,9 @@ ar2425getGainBoundariesAndPdadcsForPowers(struct ath_hal *ah, uint16_t channel,
* change pwr_I_0 to signed 5-bits.
*/
static int16_t Pmin_t2[MAX_NUM_PDGAINS_PER_CHANNEL];
/* to accomodate -ve power levels later on. */
/* to accommodate -ve power levels later on. */
static int16_t Pmax_t2[MAX_NUM_PDGAINS_PER_CHANNEL];
/* to accomodate -ve power levels later on */
/* to accommodate -ve power levels later on */
uint16_t numVpd = 0;
uint16_t Vpd_step;
int16_t tmpVal ;

View File

@ -836,7 +836,7 @@ ar5212FillCapabilityInfo(struct ath_hal *ah)
pCap->halRfSilentSupport = AH_TRUE;
}
/* NB: this is a guess, noone seems to know the answer */
/* NB: this is a guess, no one seems to know the answer */
ahpriv->ah_rxornIsFatal =
(AH_PRIVATE(ah)->ah_macVersion < AR_SREV_VERSION_VENICE);

View File

@ -51,7 +51,7 @@ ar5212SetPowerModeAwake(struct ath_hal *ah, int setChip)
* which when blindly written back with OS_REG_RMW_FIELD
* enables the MIB interrupt for the sleep performance
* counters. This can result in an interrupt storm when
* ANI is in operation as noone knows to turn off the MIB
* ANI is in operation as no one knows to turn off the MIB
* interrupt cause.
*/
scr = OS_REG_READ(ah, AR_SCR);

View File

@ -1257,7 +1257,7 @@ ar5212GetNfHistMid(const int16_t calData[AR512_NF_CAL_HIST_MAX])
}
/*
* Read the NF and check it against the noise floor threshhold
* Read the NF and check it against the noise floor threshold
*/
int16_t
ar5212GetNf(struct ath_hal *ah, HAL_CHANNEL_INTERNAL *chan)

View File

@ -411,9 +411,9 @@ ar5413getGainBoundariesAndPdadcsForPowers(struct ath_hal *ah, uint16_t channel,
* change pwr_I_0 to signed 5-bits.
*/
int16_t Pmin_t2[MAX_NUM_PDGAINS_PER_CHANNEL];
/* to accomodate -ve power levels later on. */
/* to accommodate -ve power levels later on. */
int16_t Pmax_t2[MAX_NUM_PDGAINS_PER_CHANNEL];
/* to accomodate -ve power levels later on */
/* to accommodate -ve power levels later on */
uint16_t numVpd = 0;
uint16_t Vpd_step;
int16_t tmpVal ;

View File

@ -621,7 +621,7 @@ ar5416UpdateNFHistBuff(struct ar5212NfCalHist *h, int16_t *nfarray)
}
/*
* Read the NF and check it against the noise floor threshhold
* Read the NF and check it against the noise floor threshold
*/
static int16_t
ar5416GetNf(struct ath_hal *ah, HAL_CHANNEL_INTERNAL *chan)

View File

@ -563,7 +563,7 @@ ar5416ProcTxDesc(struct ath_hal *ah,
}
/*
* These fields are not used. Zero these to preserve compatability
* These fields are not used. Zero these to preserve compatibility
* with existing drivers.
*/
ts->ts_virtcol = MS(ads->ds_ctl1, AR_VirtRetryCnt);

View File

@ -192,10 +192,10 @@
#define AR_PCIE_PM_CTRL_ENA 0x00080000
#define AR_AHB_EXACT_WR_EN 0x00000000 /* write exact bytes */
#define AR_AHB_BUF_WR_EN 0x00000001 /* buffer write upto cacheline*/
#define AR_AHB_BUF_WR_EN 0x00000001 /* buffer write up to cacheline*/
#define AR_AHB_EXACT_RD_EN 0x00000000 /* read exact bytes */
#define AR_AHB_CACHELINE_RD_EN 0x00000002 /* read upto end of cacheline */
#define AR_AHB_PREFETCH_RD_EN 0x00000004 /* prefetch upto page boundary*/
#define AR_AHB_CACHELINE_RD_EN 0x00000002 /* read up to end of cacheline */
#define AR_AHB_PREFETCH_RD_EN 0x00000004 /* prefetch up to page boundary*/
#define AR_AHB_PAGE_SIZE_1K 0x00000000 /* set page-size as 1k */
#define AR_AHB_PAGE_SIZE_2K 0x00000008 /* set page-size as 2k */
#define AR_AHB_PAGE_SIZE_4K 0x00000010 /* set page-size as 4k */
@ -416,7 +416,7 @@
#define AR_PCU_MISS_BCN_IN_SLEEP 0x00004000 /* count bmiss's when sleeping */
#define AR_PCU_BUG_12306_FIX_ENA 0x00020000 /* use rx_clear to count sifs */
#define AR_PCU_FORCE_QUIET_COLL 0x00040000 /* kill xmit for channel change */
#define AR_PCU_TBTT_PROTECT 0x00200000 /* no xmit upto tbtt+20 uS */
#define AR_PCU_TBTT_PROTECT 0x00200000 /* no xmit up to tbtt+20 uS */
#define AR_PCU_CLEAR_VMF 0x01000000 /* clear vmf mode (fast cc)*/
#define AR_PCU_CLEAR_BA_VALID 0x04000000 /* clear ba state */

View File

@ -61,7 +61,7 @@
*
* It is not an aimless search, there is some direction to the search
* pattern. But then, the minstels of old only sung where they thought
* they would get an income. Similarily, we direct thesearch a little.
* they would get an income. Similarly, we direct the search a little.
*
* Enjoy. Derek Smithies. */

View File

@ -92,7 +92,7 @@
/*
* BSD/Linux compatibility shims. These are used mainly to
* minimize differences when importing necesary BSD code.
* minimize differences when importing necessary BSD code.
*/
#define NBBY 8 /* number of bits/byte */

View File

@ -1847,7 +1847,7 @@ ieee80211_build_countryie(struct ieee80211com *ic)
* NB: this is not quite right, since we should have one of:
* 'I': indoor only
* 'O': outdoor only
* ' ': all enviroments
* ' ': all environments
* we currently can only provide 'I' or ' '.
*/
ic->ic_country_ie.country_str[2] = 'I';

View File

@ -393,7 +393,7 @@ ieee80211_input(struct ieee80211vap *vap, struct ieee80211_node *ni_or_null,
/* since ieee80211_input() can be called multiple times for
* flooding VAPs when we don't know which VAP needs the packet -
* we don't want to update the wrong state when ni is assigned
* to the bss node to accomodate this case. */
* to the bss node to accommodate this case. */
if (IEEE80211_ADDR_EQ(wh->i_addr2, ni->ni_macaddr)) {
ni->ni_rssi = rssi;
ni->ni_rtsf = rtsf;
@ -1051,7 +1051,7 @@ ieee80211_defrag(struct ieee80211_node *ni, struct sk_buff *skb, int hdrlen)
if (more_frag) {
if (skb_is_nonlinear(skb)) {
/*
* We need a continous buffer to
* We need a continuous buffer to
* assemble fragments
*/
ni->ni_rxfrag = skb_copy(skb, GFP_ATOMIC);

View File

@ -99,7 +99,7 @@ static struct attribute *ieee80211_sysfs_attrs[] = {
};
static struct attribute_group ieee80211_attr_grp = {
.name = NULL, /* No seperate (sub-)directory */
.name = NULL, /* No separate (sub-)directory */
.attrs = ieee80211_sysfs_attrs
};
#endif /* LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,17) */

View File

@ -374,7 +374,7 @@ ieee80211_reset_bss(struct ieee80211vap *vap)
IEEE80211_DPRINTF(vap, IEEE80211_MSG_ASSOC,
"%s: ni:%p allocated for " MAC_FMT "\n",
__func__, ni, MAC_ADDR(vap->iv_myaddr));
KASSERT(ni != NULL, ("unable to setup inital BSS node"));
KASSERT(ni != NULL, ("unable to setup initial BSS node"));
vap->iv_bss = PASS_NODE(ni);
KASSERT((atomic_read(&vap->iv_bss->ni_refcnt) == 2),

View File

@ -279,7 +279,7 @@ struct ieee80211_node *ieee80211_find_txnode(struct ieee80211vap *,
/* Reference counting only needs to be locked out against the transitions,
* 0->1 and 1->0 (i.e., when we do not own the reference we are getting).
* This only happens when finding the a node reference from the node table,
* which is locked seperately. Thus, we do not need to lock the follwoing
* which is locked separately. Thus, we do not need to lock the following
* functions.
* Increment the reference counter for ieee80211_node *. */
struct ieee80211_node *ieee80211_ref_node(struct ieee80211_node *ni);

View File

@ -76,7 +76,7 @@
* This is halfway between the 10@100ms default from prior hardcoded setting for
* software beacon miss timers, and the 7@100ms default from prior hardcoded
* timer value for hardware beacon miss timer.
* Based upon emperical evidence and practices of commercial vendors, I believe
* Based upon empirical evidence and practices of commercial vendors, I believe
* this should really be 2500ms by default. */
#define IEEE80211_BMISSTHRESH_DEFAULT_MS 850

View File

@ -983,7 +983,7 @@ ieee80211_ioctl_giwrange(struct net_device *dev, struct iw_request_info *info,
}
/* Atheros' RSSI value is SNR: 0 -> 60 for old chipsets. Range
* for newer chipsets is unknown. This value is arbitarily chosen
* for newer chipsets is unknown. This value is arbitrarily chosen
* to give an indication that full rate will be available and to be
* a practicable maximum. */
range->max_qual.qual = 70;
@ -2186,7 +2186,7 @@ ieee80211_setupxr(struct ieee80211vap *vap)
strcat(name, "-xr");
/*
* Create a new XR vap. If the normal VAP is already up,
* bring up the XR vap aswell.
* bring up the XR vap as well.
*/
vap->iv_ath_cap &= ~IEEE80211_ATHC_TURBOP; /* turn off turbo */
ieee80211_scan_flush(ic); /* NB: could optimize */

View File

@ -1065,7 +1065,7 @@ struct iw_priv_args
*/
struct iw_event
{
__u16 len; /* Real lenght of this stuff */
__u16 len; /* Real length of this stuff */
__u16 cmd; /* Wireless IOCTL */
union iwreq_data u; /* IOCTL fixed payload */
};