mirrors
/
madwifi
mirror of https://github.com/proski/madwifi
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

This commit updates the descriptions of the parameters to indicate default values, and makes those default values explicit in the global variables in the module. 

Further, the tpc module parameter was based upon a misunderstanding of what the HAL really supports and has been re-characterized.

Originally I believed that the HAL implemented per-node power level tuning but they apparently felt the specifications were too complicated and instead they implemented the minimum requirement for ETSI aggregate power limit compliance.

In short, "tpc" really uses a fixed power level for all packets of the regulatory maximum less 3dBm.  It also defeats the fine-grained control (per descriptor) we have over the power levels of transmitted packets.

Therefore, I have renamed this to "hal_tpc" and updated the comments to reflect that this really is ETSI-style TPC hack for aggregate power.  Since the user can set the power level to max -3dBm just as easily, I don't see the point of it after all, but it's still supported just in case someone finds value in it.



git-svn-id: http://madwifi-project.org/svn/madwifi/trunk@3506 0192ed92-7a03-0410-a25b-9323aeb14dbd
This commit is contained in:
mtaylor 2008-04-10 03:28:20 +00:00
parent 0d6c6d0c6c
commit 449f6e1220
1 changed files with 41 additions and 42 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

83
ath/if_ath.c
View File

@ -381,15 +381,15 @@ static int ath_countrycode = CTRY_DEFAULT; /* country code */
static int ath_outdoor = AH_FALSE; /* enable outdoor use */
static int ath_xchanmode = AH_TRUE; /* enable extended channels */
static int ath_maxvaps = ATH_MAXVAPS_DEFAULT; /* set default maximum vaps */
static char *autocreate = NULL;
static char *autocreate = "sta";
static char *ratectl = DEF_RATE_CTL;
static int rfkill = 0;
static int tpc = 0;
static int hal_tpc = 0;
static int intmit = 0;
static int countrycode = -1;
static int maxvaps = -1;
static int outdoor = -1;
static int xchanmode = -1;
static int countrycode = CTRY_DEFAULT;
static int maxvaps = ATH_MAXVAPS_DEFAULT;
static int outdoor = 0;
static int xchanmode = 0;
static int beacon_cal = 1;
static const char *hal_status_desc[] = {
@ -423,7 +423,7 @@ MODULE_PARM(outdoor, "i");
MODULE_PARM(xchanmode, "i");
MODULE_PARM(rfkill, "i");
#ifdef ATH_CAP_TPC
MODULE_PARM(tpc, "i");
MODULE_PARM(hal_tpc, "i");
#endif
MODULE_PARM(autocreate, "s");
MODULE_PARM(ratectl, "s");
@ -437,20 +437,20 @@ module_param(outdoor, int, 0600);
module_param(xchanmode, int, 0600);
module_param(rfkill, int, 0600);
#ifdef ATH_CAP_TPC
module_param(tpc, int, 0600);
module_param(hal_tpc, int, 0600);
#endif
module_param(autocreate, charp, 0600);
module_param(ratectl, charp, 0600);
module_param(intmit, int, 0600);
#endif
MODULE_PARM_DESC(countrycode, "Override default country code");
MODULE_PARM_DESC(maxvaps, "Maximum VAPs");
MODULE_PARM_DESC(outdoor, "Enable/disable outdoor use");
MODULE_PARM_DESC(xchanmode, "Enable/disable extended channel mode");
MODULE_PARM_DESC(rfkill, "Enable/disable RFKILL capability");
MODULE_PARM_DESC(countrycode, "Override default country code. Default is 0.");
MODULE_PARM_DESC(maxvaps, "Maximum VAPs. Default is 4.");
MODULE_PARM_DESC(outdoor, "Enable/disable outdoor use. Default is 0.");
MODULE_PARM_DESC(xchanmode, "Enable/disable extended channel mode.");
MODULE_PARM_DESC(rfkill, "Enable/disable RFKILL capability. Default is 0.");
#ifdef ATH_CAP_TPC
MODULE_PARM_DESC(tpc, "Enable/disable per-packet transmit power control (TPC) "
"capability");
MODULE_PARM_DESC(hal_tpc, "Disables manual per-packet transmit power control and "
"lets this be managed by the HAL. Default is OFF.");
#endif
MODULE_PARM_DESC(autocreate, "Create ath device in "
"[sta|ap|wds|adhoc|ahdemo|monitor] mode. defaults to sta, use "
@ -582,12 +582,36 @@ ath_attach(u_int16_t devid, struct net_device *dev, HAL_BUS_TAG tag)
goto bad;
}
sc->sc_ah = ah;
/*
* TPC support can be done either with a global cap or
* per-packet support. The latter is not available on
* all parts. We're a bit pedantic here as all parts
* support a global cap.
*/
#ifdef ATH_CAP_TPC
sc->sc_hastpc = ath_hal_hastpc(ah);
if (hal_tpc && !sc->sc_hastpc) {
WPRINTF(sc, "HAL managed transmit power control (TPC) "
"was requested, but is not "
"supported by the HAL.\n");
hal_tpc = 0;
}
IPRINTF(sc, "HAL managed transmit power control (TPC) %s.\n",
hal_tpc ? "enabled" : "disabled");
ath_hal_settpc(ah, hal_tpc);
#else
sc->sc_hastpc = 0;
hal_tpc = 0; /* TPC is always zero, when compiled without ATH_CAP_TPC */
#endif
/*
* Init ic_caps prior to queue init, since WME cap setting
* depends on queue setup.
*/
ic->ic_caps = 0;
if (ath_hal_hastxpowlimit(ah)) {
ic->ic_caps |= IEEE80211_C_TXPMGT;
}
/* Interference mitigation/ambient noise immunity (ANI).
* In modes other than HAL_M_STA, it causes receive sensitivity
* problems for OFDM. */
@ -954,31 +978,6 @@ ath_attach(u_int16_t devid, struct net_device *dev, HAL_BUS_TAG tag)
}
}
/*
* TPC support can be done either with a global cap or
* per-packet support. The latter is not available on
* all parts. We're a bit pedantic here as all parts
* support a global cap.
*/
#ifdef ATH_CAP_TPC
sc->sc_hastpc = ath_hal_hastpc(ah);
if (tpc && !sc->sc_hastpc) {
WPRINTF(sc, "Per-packet transmit "
"power control was requested, but is not "
"supported by the hardware.\n");
tpc = 0;
}
IPRINTF(sc, "Switching per-packet transmit power "
"control %s\n",
tpc ? "on" : "off");
ath_hal_settpc(ah, tpc);
#else
sc->sc_hastpc = 0;
tpc = 0; /* TPC is always zero, when compiled without ATH_CAP_TPC */
#endif
if (sc->sc_hastpc || ath_hal_hastxpowlimit(ah))
ic->ic_caps |= IEEE80211_C_TXPMGT;
/*
* Default 11.h to start enabled.
*/
@ -2467,7 +2466,7 @@ ath_init(struct net_device *dev)
#ifdef ATH_CAP_TPC
/* Re-enable after suspend */
ath_hal_settpc(ah, tpc);
ath_hal_settpc(ah, hal_tpc);
#endif
/* Whether we should enable h/w TKIP MIC */
@ -9960,7 +9959,7 @@ ath_update_txpow(struct ath_softc *sc)
new_clamped_maxtxpower = ic->ic_txpowlimit;
/* Search for the VAP that needs a txpow change, if any */
TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) {
if (!tpc || ic->ic_newtxpowlimit != vap->iv_bss->ni_txpower) {
if (!hal_tpc || ic->ic_newtxpowlimit != vap->iv_bss->ni_txpower) {
vap->iv_bss->ni_txpower = new_clamped_maxtxpower;
ieee80211_iterate_nodes(&vap->iv_ic->ic_sta,
set_node_txpower,