madwifi/net80211/ieee80211_var.h

780 lines
34 KiB
C
Raw Normal View History

/*-
* Copyright (c) 2001 Atsushi Onoe
* Copyright (c) 2002-2005 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $Id$
*/
#ifndef _NET80211_IEEE80211_VAR_H_
#define _NET80211_IEEE80211_VAR_H_
/* Definitions for IEEE 802.11 drivers. */
#include <net80211/ieee80211_linux.h>
#include <sys/queue.h>
#include <net80211/_ieee80211.h>
#include <net80211/ieee80211.h>
#include <net80211/ieee80211_crypto.h>
#include <net80211/ieee80211_ioctl.h> /* for ieee80211_stats */
#include <net80211/ieee80211_power.h>
#include <net80211/ieee80211_proto.h>
#include <net80211/ieee80211_scan.h>
/* NB:
* - Atheros chips use 6 bits when power is specified in whole dBm units, with
* a value range from 0 to 63.
* - Atheros chips use 7 bits when power is specified in half dBm units, with
* a value range from 0 to 127.
*/
#define IEEE80211_TXPOWER_MAX 127 /* .5 dBm units */
#define IEEE80211_TXPOWER_MIN 0 /* kill radio */
#define IEEE80211_DTIM_MAX 15 /* max DTIM period */
#define IEEE80211_DTIM_MIN 1 /* min DTIM period */
#define IEEE80211_DTIM_DEFAULT 1 /* default DTIM period */
#define IEEE80211_BINTVAL_MAX 1000 /* max beacon interval (TUs) */
#define IEEE80211_BINTVAL_MIN 25 /* min beacon interval (TUs) */
#define IEEE80211_BINTVAL_DEFAULT 100 /* default beacon interval (TUs) */
#define IEEE80211_BINTVAL_VALID(_bi) \
((IEEE80211_BINTVAL_MIN <= (_bi)) && \
((_bi) <= IEEE80211_BINTVAL_MAX))
#define IEEE80211_BINTVAL_SANITISE(_bi) \
(IEEE80211_BINTVAL_VALID(_bi) ? \
(_bi) : IEEE80211_BINTVAL_DEFAULT)
#define IEEE80211_BMISSTHRESH_BMIN 2 /* min bmiss threshold (beacons) */
/* Default beacon miss threshold is set to roundup from 850ms
* This is halfway between the 10@100ms default from prior hardcoded setting for
* software beacon miss timers, and the 7@100ms default from prior hardcoded
* timer value for hardware beacon miss timer.
* Based upon empirical evidence and practices of commercial vendors, I believe
* this should really be 2500ms by default. */
#define IEEE80211_BMISSTHRESH_DEFAULT_MS 850
#define IEEE80211_BMISSTHRESH_VALID(_bmt) \
(IEEE80211_BMISSTHRESH_BMIN <= (_bmt))
#define IEEE80211_BMISSTHRESH_SANITISE(_bmt) \
((IEEE80211_BMISSTHRESH_BMIN > (_bmt)) ? \
IEEE80211_BMISSTHRESH_BMIN : (_bmt))
#define IEEE80211_BGSCAN_INTVAL_MIN 15 /* min bg scan intvl (secs) */
#define IEEE80211_BGSCAN_INTVAL_DEFAULT (5 * 60) /* default BG scan int. */
#define IEEE80211_BGSCAN_IDLE_MIN 100 /* min idle time (ms) */
#define IEEE80211_BGSCAN_IDLE_DEFAULT 250 /* default idle time (ms) */
#define IEEE80211_COVERAGE_CLASS_MAX 31 /* max coverage class */
#define IEEE80211_REGCLASSIDS_MAX 10 /* max regclass id list */
#define IEEE80211_PS_SLEEP 0x1 /* STA is in power saving mode */
#define IEEE80211_PS_MAX_QUEUE 50 /* maximum saved packets */
#define IEEE80211_XR_BEACON_FACTOR 3 /* factor between xr Beacon interval and normal beacon interval */
#define IEEE80211_XR_DEFAULT_RATE_INDEX 0
#define IEEE80211_XR_FRAG_THRESHOLD 540
#define IEEE80211_FIXED_RATE_NONE -1
#define DEV_NAME(_d) \
((NULL == _d || NULL == _d->name || 0 == strncmp(_d->name, "wifi%d", 6)) ? \
"MadWifi" : \
_d->name)
#define VAP_DEV_NAME(_v) \
((NULL == _v) ? \
"MadWifi" : \
DEV_NAME(_v->iv_dev))
#define SC_DEV_NAME(_sc) \
((NULL == _sc) ? \
"MadWifi" : \
DEV_NAME(_sc->sc_dev))
#define VAP_IC_DEV_NAME(_v) \
((NULL == _v || NULL == _v->iv_ic) ? \
"MadWifi" : \
DEV_NAME(_v->iv_ic->ic_dev))
/*
* TU conversions:
*
* TU is a 32bit value and defined by IEEE802.11 (page 6) as "A measurement of
* time equal to 1024 usec (microseconds)".
*
* TSF is a 64bit value in usec, therefore if we right shift it by 10 bit this
* will directly convert it to TU. The rest is truncated to fit into 32 bit.
*/
#define IEEE80211_TSF_TO_TU(_tsf) ((u_int32_t)((_tsf) >> 10))
#define IEEE80211_TU_TO_TSF(_tu) (((u_int64_t)(_tu)) << 10)
#define IEEE80211_MS_TO_TU(x) (((x) * 1000) / 1024)
#define IEEE80211_TU_TO_MS(x) (((x) * 1024) / 1000)
#define IEEE80211_TU_TO_JIFFIES(x) ((IEEE80211_TU_TO_MS(x) * HZ) / 1000)
#define IEEE80211_JIFFIES_TO_TU(x) IEEE80211_MS_TO_TU((x) * 1000 / HZ)
#define IEEE80211_TU_TO_MS_UP(x) (((x) * 1024 + 1000 - 1) / 1000)
#define IEEE80211_TU_TO_JIFFIES_UP(x) \
((IEEE80211_TU_TO_MS_UP(x) * HZ + 1000 - 1) / 1000)
#define IEEE80211_APPIE_MAX 1024
#define IEEE80211_PWRCONSTRAINT_VAL(ic) \
(((ic)->ic_bsschan->ic_maxregpower > (ic)->ic_curchanmaxpwr) ? \
(ic)->ic_bsschan->ic_maxregpower - (ic)->ic_curchanmaxpwr : 0)
/* 802.11 control state is split into a common portion that maps
* 1-1 to a physical device and one or more "Virtual APs" (VAP)
* that are bound to an ieee80211com instance and share a single
* underlying device. Each VAP has a corresponding OS device
* entity through which traffic flows and that applications use
* for issuing ioctls, etc.
*/
/* Data common to one or more virtual APs. State shared by
* the underlying device and the net80211 layer is exposed here;
* e.g. device-specific callbacks.
*/
struct ieee80211com;
struct ieee80211_proc_entry;
struct vlan_group;
struct eapolcom;
struct ieee80211_aclator;
struct ieee80211_nsparams {
enum ieee80211_state newstate;
int arg;
int result;
};
#define IW_MAX_SPY 8
struct ieee80211_spy {
u_int8_t mac[IW_MAX_SPY * IEEE80211_ADDR_LEN];
u_int64_t ts_rssi[IW_MAX_SPY]; /* ts of rssi value from last read */
u_int8_t thr_low; /* 1 byte rssi value, 0 = threshold is off */
u_int8_t thr_high; /* 1 byte rssi value */
u_int8_t num;
};
struct ieee80211_app_ie {
u_int32_t length; /* buffer length */
struct ieee80211_ie *ie; /* buffer containing one or more IEs */
};
struct ieee80211vap {
struct net_device *iv_dev; /* associated device */
struct net_device_stats iv_devstats; /* interface statistics */
struct ifmedia iv_media; /* interface media config */
struct iw_statistics iv_iwstats; /* wireless statistics block */
struct ctl_table_header *iv_sysctl_header;
struct ctl_table *iv_sysctls;
struct proc_dir_entry *iv_proc;
struct ieee80211_proc_entry *iv_proc_entries;
struct vlan_group *iv_vlgrp; /* vlan group state */
TAILQ_ENTRY(ieee80211vap) iv_next; /* list of vap instances */
struct ieee80211com *iv_ic; /* back ptr to common state */
u_int32_t iv_debug; /* debug msg flags */
struct ieee80211_stats iv_stats; /* statistics */
int iv_monitor_nods_only; /* in monitor mode only nods traffic */
int iv_monitor_txf_len; /* in monitor mode, truncate tx packets */
int iv_monitor_phy_errors; /* in monitor mode, accept phy errors */
int iv_monitor_crc_errors; /* in monitor mode, accept crc errors */
int (*iv_newstate)(struct ieee80211vap *, enum ieee80211_state, int);
u_int8_t iv_myaddr[IEEE80211_ADDR_LEN];
u_int32_t iv_flags; /* state flags */
u_int32_t iv_flags_ext; /* extension of state flags */
u_int32_t iv_caps; /* capabilities */
u_int8_t iv_ath_cap; /* Atheros adv. capabilities */
enum ieee80211_opmode iv_opmode; /* operation mode */
enum ieee80211_state iv_state; /* state machine state */
struct timer_list iv_mgtsend; /* mgmt frame response timer */
/* inactivity timer settings */
int iv_inact_init; /* setting for new station */
int iv_inact_auth; /* auth but not assoc setting */
int iv_inact_run; /* authorized setting */
int iv_inact_probe; /* inactive probe time */
int iv_des_nssid; /* # desired ssids */
struct ieee80211_scan_ssid iv_des_ssid[1]; /* desired ssid table */
u_int8_t iv_des_bssid[IEEE80211_ADDR_LEN];
struct ieee80211_channel *iv_des_chan; /* desired channel */
u_int16_t iv_des_mode; /* desired mode */
int iv_nicknamelen; /* XXX junk */
u_int8_t iv_nickname[IEEE80211_NWID_LEN];
u_int iv_bgscanidle; /* bg scan idle threshold */
u_int iv_bgscanintvl; /* bg scan min interval */
u_int iv_scanvalid; /* scan cache valid threshold */
struct ieee80211_roam iv_roam; /* sta-mode roaming state */
u_int32_t *iv_aid_bitmap; /* association id map */
u_int16_t iv_max_aid;
u_int16_t iv_sta_assoc; /* stations associated */
u_int16_t iv_ps_sta; /* stations in power save */
u_int16_t iv_ps_pending; /* PS STAs w/ pending frames */
u_int8_t *iv_tim_bitmap; /* power-save stations w/ data */
u_int16_t iv_tim_len; /* ic_tim_bitmap size (bytes) */
u_int8_t iv_dtim_period; /* DTIM period */
u_int8_t iv_dtim_count; /* DTIM count from last bcn */
/* set/unset aid pwrsav state */
void (*iv_set_tim)(struct ieee80211_node *, int);
u_int8_t iv_uapsdinfo; /* sta mode QoS Info flags */
struct ieee80211_node *iv_bss; /* information for this node */
u_int8_t iv_bssid[IEEE80211_ADDR_LEN];
int iv_fixed_rate; /* 802.11 rate or IEEE80211_FIXED_RATE_NONE */
u_int16_t iv_rtsthreshold;
u_int16_t iv_fragthreshold;
u_int16_t iv_txmin; /* min tx retry count */
u_int16_t iv_txmax; /* max tx retry count */
u_int16_t iv_txlifetime; /* tx lifetime */
int iv_inact_timer; /* inactivity timer wait */
void *iv_opt_ie; /* user-specified IEs */
u_int16_t iv_opt_ie_len; /* length of ni_opt_ie */
ieee80211_keyix_t iv_def_txkey; /* default/group TX key index */
struct ieee80211_key iv_nw_keys[IEEE80211_WEP_NKID];
ieee80211_keyix_t (*iv_key_alloc)(struct ieee80211vap *, const struct ieee80211_key *);
int (*iv_key_delete)(struct ieee80211vap *, const struct ieee80211_key *,
struct ieee80211_node *);
int (*iv_key_set)(struct ieee80211vap *, const struct ieee80211_key *,
const u_int8_t mac[IEEE80211_ADDR_LEN]);
void (*iv_key_update_begin)(struct ieee80211vap *);
void (*iv_key_update_end)(struct ieee80211vap *);
#ifdef ATH_SUPERG_COMP
void (*iv_comp_set)(struct ieee80211vap *, struct ieee80211_node *, int);
#endif
const struct ieee80211_authenticator *iv_auth; /* authenticator glue */
void *iv_ec; /* private auth state */
struct ieee80211vap *iv_xrvap; /* pointer to XR VAP , if XR is enabled */
u_int16_t iv_xrbcnwait; /* SWBA count incremented until it reaches XR_BECON_FACTOR */
struct timer_list iv_xrvapstart; /* timer to start xr */
int iv_mcast_rate; /* Multicast rate (Kbps) */
const struct ieee80211_aclator *iv_acl; /* aclator glue */
void *iv_as; /* private aclator state */
struct timer_list iv_swbmiss; /* software beacon miss timer */
u_int16_t iv_swbmiss_period; /* software beacon miss timer period */
struct ieee80211_nsparams iv_nsparams; /* new state parameters for tasklet for stajoin1 */
struct IEEE80211_TQ_STRUCT iv_stajoin1tq; /* tasklet for newstate action called from stajoin1tq */
unsigned int iv_nsdone; /* Done with scheduled newstate tasklet */
uint8_t wds_mac[IEEE80211_ADDR_LEN];
struct ieee80211_spy iv_spy; /* IWSPY support */
struct ieee80211_app_ie app_ie[IEEE80211_APPIE_NUM_OF_FRAME]; /* app-specified IEs by frame type */
u_int32_t app_filter; /* filters which management frames are forwarded to app */
u_int64_t (*iv_get_tsf)(struct ieee80211vap *);
u_int32_t (*iv_get_nexttbtt)(struct ieee80211vap *);
};
/* Debug functions need the definition of struct ieee80211vap because iv_debug
* is used at runtime to determine if we should log an event
*/
#include <net80211/ieee80211_debug.h>
#include <net80211/ieee80211_node.h>
This patch augments the current reference counting code with: * Counters for total outstanding instances for each resource type (skb, ath_node and ath_buf) * One pair of acquisition/release functions per resource type in unlocked and one in locked * Adds some more _debug versions of functions in the call chain that acquire/release resources so that the original func/line in the driver as well as the func/line that affected the resource use can be shown in the trace. Intermediate stack frames aren't necessary to trace the leaks. * Changes naming convention for "lock-required" functions to suffix _locked for the versions that expect locking, to be consistent with some other places in the code. * Consolidate debug messages to the helper functions that actually affect the reference count or acquire/release a resource * Additional sanity checks and leak detection (esp for detecting node ref leaks through skb) * skb references are nulled out by the new sbk unref/free function. I've tested these changes extensively and found lots of cases where we didn't get enough node references when cloning skbuff, and where the kernel drops packets due to performance issues and leaks our node references. With these changes and the tracing enabled I have verified that: * TX BUF: tx buffers always go down to zero when the tx queue is done, and you can watch tx queue usage ratio go up and down again as the driver is working. There are no leaks here at the moment, although there *are* some in the madwifi-dfs branch during CAC at the moment. * skbuff leaks in all the common flows are fixed. We were leaking node references in a lot of places where kernel was dropping skb's due to congestion and we were failing to increment node references when cloning skbuffs. These are now detected, as are skbuffs that are reaped by the kernel while still holding a node reference. * the ath_node count works correctly and on an idle system we get about 5 references per station table node, with 2 node instances per VAP. One for the bss and one for the node in the station table, I believe. The ath_node count goes up and down but always lands back at the stable number based on the vaps you have configured and the number of actual stations in the station table. The point here is that it's pretty constant what you will see over time, despite excessive node creation/release in our code during input (esp input_all). Thank god for the slab allocator. git-svn-id: http://madwifi-project.org/svn/madwifi/trunk@2902 0192ed92-7a03-0410-a25b-9323aeb14dbd
2007-11-21 23:14:11 +03:00
#include <net80211/ieee80211_skb.h>
struct ieee80211com {
struct net_device *ic_dev; /* associated device */
ieee80211com_lock_t ic_comlock; /* state update lock */
ieee80211com_lock_t ic_vapslock; /* vap state machine lock */
TAILQ_HEAD(ieee80211vap_headtype,
ieee80211vap) ic_vaps; /* list of vap instances */
enum ieee80211_phytype ic_phytype; /* XXX wrong for multi-mode */
enum ieee80211_opmode ic_opmode; /* operation mode */
struct ifmedia ic_media; /* interface media config */
u_int8_t ic_myaddr[IEEE80211_ADDR_LEN];
struct timer_list ic_inact; /* mgmt/inactivity timer */
u_int32_t ic_flags; /* state flags */
u_int32_t ic_flags_ext; /* extension of state flags */
u_int32_t ic_caps; /* capabilities */
u_int8_t ic_ath_cap; /* Atheros adv. capabilities */
u_int8_t ic_promisc; /* VAPs needing promisc mode */
u_int8_t ic_allmulti; /* VAPs needing all multicast */
u_int8_t ic_nopened; /* VAPs been opened */
struct ieee80211_rateset ic_sup_rates[IEEE80211_MODE_MAX];
struct ieee80211_rateset ic_sup_xr_rates;
struct ieee80211_rateset ic_sup_half_rates;
struct ieee80211_rateset ic_sup_quarter_rates;
u_int16_t ic_modecaps; /* set of mode capabilities */
u_int16_t ic_curmode; /* current mode */
u_int16_t ic_lintval; /* beacon interval */
u_int16_t ic_holdover; /* PM hold over duration */
u_int16_t ic_bmissthreshold; /* beacon miss threshold (# beacons) */
unsigned long ic_bmiss_guard; /* when to cease ignoring bmiss (jiffies) */
u_int16_t ic_txpowlimit; /* global tx power limit (in 0.5 dBm) */
u_int16_t ic_newtxpowlimit; /* tx power limit to change to (in 0.5 dBm) */
u_int16_t ic_uapsdmaxtriggers; /* max triggers that could arrive */
u_int8_t ic_coverageclass; /* coverage class */
/* Channel state:
*
* ic_channels is the set of available channels for the device;
* it is setup by the driver
* ic_nchans is the number of valid entries in ic_channels
* ic_chan_avail is a bit vector of these channels used to check
* whether a channel is available w/o searching the channel table.
* ic_chan_active is a (potentially) constrained subset of
* ic_chan_avail that reflects any mode setting or user-specified
* limit on the set of channels to use/scan
* ic_curchan is the current channel the device is set to; it may
* be different from ic_bsschan when we are off-channel scanning
* or otherwise doing background work
* ic_bsschan is the channel selected for operation; it may
* be undefined (IEEE80211_CHAN_ANYC)
*/
int ic_nchans; /* # entries in ic_channels */
struct ieee80211_channel ic_channels[IEEE80211_CHAN_MAX+1];
struct timeval ic_chan_non_occupy[IEEE80211_CHAN_MAX];
u_int8_t ic_chan_avail[IEEE80211_CHAN_BYTES];
u_int8_t ic_chan_active[IEEE80211_CHAN_BYTES];
struct ieee80211_channel *ic_curchan; /* current channel */
struct ieee80211_channel *ic_bsschan; /* bss channel */
int16_t ic_channoise; /* current channel noise in dBm */
struct timer_list ic_dfs_excl_timer;
/*
* Spectrum management (IEEE 802.11h-2003):
*
* ic_chan_nodes is an array of numbers of nodes that provide
* ni_suppchans with the given channel reported as supported. Index
* of the array is an IEEE channel number (ic_ieee)
* ic_cn_total is the number of nodes counted in ic_chan_nodes
* (provided ni_suppchans and are associated)
* ic_sc_mincom is the desired minimum number of common channels, the
* parameter used by SC_TIGHT and SC_STRICT algorithms
* ic_sc_algorithm is the algorithm for (re)association based on
* supported channels
* ic_sc_slcg is the permil of Stations Lost per Channel Gained, the
* parameter used by SC_TIGHT and SC_STRICT algorithms. If due to
* association of the STA and disassociation of x other STAs (out of
* y associated STAs in total), the number of common channel
* increases by z, then such an action is performed if
* 1000 * x/y < z * ic_sc_slcg
* ic_sc_sldg is the permil of Stations Lost per rssi Db Gained, the
* parameter used by SC_LOOSE algorithm. If due to the switch,
* the maximum RSSI of received packets on the current channel would
* decrease by z decibels and x stations from the set of y stations
* would be lost, then such a switch will be performed if
* 1000 * x/y < z * ic_sc_sldg
* ic_sc_ie is the Supported Channels IE that is about to be sent along
* with (re)assoc requests (STA mode)
*/
u_int16_t ic_chan_nodes[IEEE80211_CHAN_MAX+1];
u_int16_t ic_cn_total; /* # nodes counted in ic_chan nodes */
u_int16_t ic_sc_mincom; /* minimum number of common channels */
enum ieee80211_sc_algorithm ic_sc_algorithm;
u_int16_t ic_sc_slcg; /* permil of Stations Lost per Channel Gained */
u_int16_t ic_sc_sldg; /* permil of Stations Lost per rssi Db Gained */
struct ieee80211_ie_sc ic_sc_ie; /* Supported Channels IE */
/* Regulatory class ids */
u_int ic_nregclass; /* # entries in ic_regclassids */
u_int8_t ic_regclassids[IEEE80211_REGCLASSIDS_MAX];
/* Scan-related state */
struct ieee80211_scan_state *ic_scan; /* scan state */
enum ieee80211_roamingmode ic_roaming; /* roaming mode */
unsigned long ic_lastdata; /* time of last data frame */
unsigned long ic_lastscan; /* time last scan completed */
/* NB: this is the union of all vap stations/neighbors */
struct ieee80211_node_table ic_sta; /* stations/neighbors */
/* XXX Multi-BSS: split out common/VAP parts? */
struct ieee80211_wme_state ic_wme; /* WME/WMM state */
/* XXX Multi-BSS: can per-VAP be done/make sense? */
enum ieee80211_protmode ic_protmode; /* 802.11g protection mode */
int ic_rssi_ewma;
u_int16_t ic_nonerpsta; /* # non-ERP stations */
u_int16_t ic_longslotsta; /* # long slot time stations */
u_int16_t ic_sta_assoc; /* stations associated */
u_int16_t ic_dt_sta_assoc; /* dturbo capable stations */
u_int16_t ic_xr_sta_assoc; /* XR stations associated */
/* Spectrum management. */
u_int16_t ic_country_code;
int ic_country_outdoor;
struct ieee80211_ie_country ic_country_ie; /* country info element */
/* Current channel max. power, used to compute Power Constraint IE.
*
* NB: local power constraint depends on the channel, but assuming it must
* be detected dynamically, we cannot maintain a table (i.e., will not
* know value until change to channel and detect).
*/
u_int8_t ic_curchanmaxpwr;
/* To handle Channel Switch Announcements, only valid if ic_flags has
* IEEE80211_F_CHANSWITCH set. */
u_int8_t ic_csa_mode;
struct ieee80211_channel * ic_csa_chan;
u_int32_t ic_csa_expires_tu;
struct timer_list ic_csa_timer;
/* Global debug flags applicable to all VAPs */
int ic_debug;
This patch augments the current reference counting code with: * Counters for total outstanding instances for each resource type (skb, ath_node and ath_buf) * One pair of acquisition/release functions per resource type in unlocked and one in locked * Adds some more _debug versions of functions in the call chain that acquire/release resources so that the original func/line in the driver as well as the func/line that affected the resource use can be shown in the trace. Intermediate stack frames aren't necessary to trace the leaks. * Changes naming convention for "lock-required" functions to suffix _locked for the versions that expect locking, to be consistent with some other places in the code. * Consolidate debug messages to the helper functions that actually affect the reference count or acquire/release a resource * Additional sanity checks and leak detection (esp for detecting node ref leaks through skb) * skb references are nulled out by the new sbk unref/free function. I've tested these changes extensively and found lots of cases where we didn't get enough node references when cloning skbuff, and where the kernel drops packets due to performance issues and leaks our node references. With these changes and the tracing enabled I have verified that: * TX BUF: tx buffers always go down to zero when the tx queue is done, and you can watch tx queue usage ratio go up and down again as the driver is working. There are no leaks here at the moment, although there *are* some in the madwifi-dfs branch during CAC at the moment. * skbuff leaks in all the common flows are fixed. We were leaking node references in a lot of places where kernel was dropping skb's due to congestion and we were failing to increment node references when cloning skbuffs. These are now detected, as are skbuffs that are reaped by the kernel while still holding a node reference. * the ath_node count works correctly and on an idle system we get about 5 references per station table node, with 2 node instances per VAP. One for the bss and one for the node in the station table, I believe. The ath_node count goes up and down but always lands back at the stable number based on the vaps you have configured and the number of actual stations in the station table. The point here is that it's pretty constant what you will see over time, despite excessive node creation/release in our code during input (esp input_all). Thank god for the slab allocator. git-svn-id: http://madwifi-project.org/svn/madwifi/trunk@2902 0192ed92-7a03-0410-a25b-9323aeb14dbd
2007-11-21 23:14:11 +03:00
/* used for reference tracking/counting. Nodes are shared between VAPs,
* so we put this here. */
atomic_t ic_node_counter;
/* Virtual AP create/delete */
struct ieee80211vap *(*ic_vap_create)(struct ieee80211com *,
const char *, int, int, struct net_device *);
void (*ic_vap_delete)(struct ieee80211vap *);
/* Send/recv 802.11 management frame */
int (*ic_send_mgmt)(struct ieee80211_node *, int, int);
int (*ic_recv_mgmt)(struct ieee80211vap *, struct ieee80211_node *,
struct sk_buff *, int, int, u_int64_t);
/* Send management frame to driver (like hardstart) */
int (*ic_mgtstart)(struct ieee80211com *, struct sk_buff *);
/* Reset device state after 802.11 parameter/state change */
int (*ic_init)(struct net_device *);
int (*ic_reset)(struct net_device *);
/* Update device state for 802.11 slot time change */
void (*ic_updateslot)(struct net_device *);
/* New station association callback/notification */
void (*ic_newassoc)(struct ieee80211_node *, int);
/* Node state management */
struct ieee80211_node *(*ic_node_alloc)(struct ieee80211vap *);
void (*ic_node_cleanup)(struct ieee80211_node *);
This patch augments the current reference counting code with: * Counters for total outstanding instances for each resource type (skb, ath_node and ath_buf) * One pair of acquisition/release functions per resource type in unlocked and one in locked * Adds some more _debug versions of functions in the call chain that acquire/release resources so that the original func/line in the driver as well as the func/line that affected the resource use can be shown in the trace. Intermediate stack frames aren't necessary to trace the leaks. * Changes naming convention for "lock-required" functions to suffix _locked for the versions that expect locking, to be consistent with some other places in the code. * Consolidate debug messages to the helper functions that actually affect the reference count or acquire/release a resource * Additional sanity checks and leak detection (esp for detecting node ref leaks through skb) * skb references are nulled out by the new sbk unref/free function. I've tested these changes extensively and found lots of cases where we didn't get enough node references when cloning skbuff, and where the kernel drops packets due to performance issues and leaks our node references. With these changes and the tracing enabled I have verified that: * TX BUF: tx buffers always go down to zero when the tx queue is done, and you can watch tx queue usage ratio go up and down again as the driver is working. There are no leaks here at the moment, although there *are* some in the madwifi-dfs branch during CAC at the moment. * skbuff leaks in all the common flows are fixed. We were leaking node references in a lot of places where kernel was dropping skb's due to congestion and we were failing to increment node references when cloning skbuffs. These are now detected, as are skbuffs that are reaped by the kernel while still holding a node reference. * the ath_node count works correctly and on an idle system we get about 5 references per station table node, with 2 node instances per VAP. One for the bss and one for the node in the station table, I believe. The ath_node count goes up and down but always lands back at the stable number based on the vaps you have configured and the number of actual stations in the station table. The point here is that it's pretty constant what you will see over time, despite excessive node creation/release in our code during input (esp input_all). Thank god for the slab allocator. git-svn-id: http://madwifi-project.org/svn/madwifi/trunk@2902 0192ed92-7a03-0410-a25b-9323aeb14dbd
2007-11-21 23:14:11 +03:00
void (*ic_node_free)(struct ieee80211_node *);
u_int8_t (*ic_node_getrssi)(const struct ieee80211_node *);
u_int8_t (*ic_node_move_data)(const struct ieee80211_node *);
/* Scanning support */
void (*ic_scan_start)(struct ieee80211com *);
void (*ic_scan_end)(struct ieee80211com *);
void (*ic_set_channel)(struct ieee80211com *);
/* U-APSD support */
void (*ic_uapsd_flush)(struct ieee80211_node *);
/* continuous transmission support */
void (*ic_set_txcont)(struct ieee80211com *, int);
int (*ic_get_txcont)(struct ieee80211com *);
void (*ic_set_txcont_power)(struct ieee80211com *, u_int);
int (*ic_get_txcont_power)(struct ieee80211com *);
void (*ic_set_txcont_rate)(struct ieee80211com *, u_int);
u_int (*ic_get_txcont_rate)(struct ieee80211com *);
/* DFS test mode prevents marking channel interference and channel
* switching during detection probability tests */
void (*ic_set_dfs_testmode)(struct ieee80211com *, int);
int (*ic_get_dfs_testmode)(struct ieee80211com *);
/* dump HAL */
unsigned int (*ic_dump_hal_map)(struct ieee80211com *);
/* DFS channel availability check time (in seconds) */
void (*ic_set_dfs_cac_time)(struct ieee80211com *, unsigned int);
unsigned int (*ic_get_dfs_cac_time)(struct ieee80211com *);
/* DFS non-occupancy period (in seconds) */
void (*ic_set_dfs_excl_period)(struct ieee80211com *, unsigned int);
unsigned int (*ic_get_dfs_excl_period)(struct ieee80211com *);
/* DFS flag manipulation */
void (*ic_set_dfs_clear)(struct ieee80211com *, int);
void (*ic_set_dfs_interference)(struct ieee80211com *, int);
/* DFS radar detection handling */
void (*ic_radar_detected)(struct ieee80211com *, const char *cause,
int switchChanRequested, u_int8_t switchChan);
/* Set coverage class */
void (*ic_set_coverageclass)(struct ieee80211com *);
/* MHz to IEEE channel conversion */
u_int (*ic_mhz2ieee)(struct ieee80211com *, u_int, u_int);
int (*ic_debug_ath_iwpriv)(struct ieee80211com *, unsigned int param, unsigned int value);
};
#define MAX_PROC_IEEE80211_SIZE 16383
#define PROC_IEEE80211_PERM 0644
struct proc_ieee80211_priv {
int rlen;
int max_rlen;
char *rbuf;
int wlen;
int max_wlen;
char *wbuf;
};
struct ieee80211_proc_entry {
char *name;
struct file_operations *fileops;
struct proc_dir_entry *entry;
struct ieee80211_proc_entry *next;
};
MALLOC_DECLARE(M_80211_VAP);
#define IEEE80211_ADDR_NULL(a1) (memcmp(a1, "\x00\x00\x00\x00\x00\x00", \
IEEE80211_ADDR_LEN) == 0)
#define IEEE80211_ADDR_EQ(a1, a2) (memcmp(a1, a2, IEEE80211_ADDR_LEN) == 0)
#define IEEE80211_ADDR_COPY(dst, src) memcpy(dst, src, IEEE80211_ADDR_LEN)
#define IEEE80211_ADDR_SET_NULL(dst) memset(dst, 0, IEEE80211_ADDR_LEN)
/* ic_flags */
#define IEEE80211_F_FF 0x00000001 /* CONF: ATH FF enabled */
#define IEEE80211_F_TURBOP 0x00000002 /* CONF: ATH Turbo enabled*/
#define IEEE80211_F_PROMISC 0x00000004 /* STATUS: promiscuous mode */
#define IEEE80211_F_ALLMULTI 0x00000008 /* STATUS: all multicast mode */
/* NB: this is intentionally setup to be IEEE80211_CAPINFO_PRIVACY */
#define IEEE80211_F_PRIVACY 0x00000010 /* CONF: privacy enabled */
#define IEEE80211_F_PUREG 0x00000020 /* CONF: 11g w/o 11b STAs */
#define IEEE80211_F_XRUPDATE 0x00000040 /* CONF: update beacon XR element*/
#define IEEE80211_F_SCAN 0x00000080 /* STATUS: scanning */
#define IEEE80211_F_XR 0x00000100 /* CONF: operate in XR mode */
#define IEEE80211_F_SIBSS 0x00000200 /* STATUS: start IBSS */
/* NB: this is intentionally setup to be IEEE80211_CAPINFO_SHORT_SLOTTIME */
#define IEEE80211_F_SHSLOT 0x00000400 /* STATUS: use short slot time*/
#define IEEE80211_F_PMGTON 0x00000800 /* CONF: Power mgmt enable */
#define IEEE80211_F_DESBSSID 0x00001000 /* CONF: des_bssid is set */
#define IEEE80211_F_WME 0x00002000 /* CONF: enable WME use */
#define IEEE80211_F_BGSCAN 0x00004000 /* CONF: bg scan enabled */
#define IEEE80211_F_SWRETRY 0x00008000 /* CONF: sw tx retry enabled */
#define IEEE80211_F_TXPOW_FIXED 0x00010000 /* TX Power: fixed rate */
#define IEEE80211_F_IBSSON 0x00020000 /* CONF: IBSS creation enable */
#define IEEE80211_F_SHPREAMBLE 0x00040000 /* STATUS: use short preamble */
#define IEEE80211_F_DATAPAD 0x00080000 /* CONF: do alignment pad */
#define IEEE80211_F_USEPROT 0x00100000 /* STATUS: protection enabled */
#define IEEE80211_F_USEBARKER 0x00200000 /* STATUS: use barker preamble*/
#define IEEE80211_F_TIMUPDATE 0x00400000 /* STATUS: update beacon tim */
#define IEEE80211_F_WPA1 0x00800000 /* CONF: WPA enabled */
#define IEEE80211_F_WPA2 0x01000000 /* CONF: WPA2 enabled */
#define IEEE80211_F_WPA 0x01800000 /* CONF: WPA/WPA2 enabled */
#define IEEE80211_F_DROPUNENC 0x02000000 /* CONF: drop unencrypted */
#define IEEE80211_F_COUNTERM 0x04000000 /* CONF: TKIP countermeasures */
#define IEEE80211_F_HIDESSID 0x08000000 /* CONF: hide SSID in beacon */
#define IEEE80211_F_NOBRIDGE 0x10000000 /* CONF: disable internal bridge */
#define IEEE80211_F_WMEUPDATE 0x20000000 /* STATUS: update beacon wme */
#define IEEE80211_F_DOTH 0x40000000 /* CONF: enable 11.h (dot11SpectrumManagementRequired) */
#define IEEE80211_F_CHANSWITCH 0x80000000 /* force chanswitch */
/* ic_flags_ext */
#define IEEE80211_FEXT_WDS 0x00000001 /* CONF: 4 addr allowed */
#define IEEE80211_FEXT_COUNTRYIE 0x00000002 /* CONF: enable country IE */
#define IEEE80211_FEXT_SCAN_PENDING 0x00000004 /* STATE: scan pending */
#define IEEE80211_FEXT_BGSCAN 0x00000008 /* STATE: enable full bgscan completion */
#define IEEE80211_FEXT_UAPSD 0x00000010 /* CONF: enable U-APSD */
#define IEEE80211_FEXT_SLEEP 0x00000020 /* STATUS: sleeping */
#define IEEE80211_FEXT_EOSPDROP 0x00000040 /* drop uapsd EOSP frames for test */
#define IEEE80211_FEXT_MARKDFS 0x00000080 /* Enable marking of dfs interference */
#define IEEE80211_FEXT_REGCLASS 0x00000100 /* CONF: send regclassids in country ie */
#define IEEE80211_FEXT_ERPUPDATE 0x00000200 /* STATUS: update ERP element */
#define IEEE80211_FEXT_SWBMISS 0x00000400 /* CONF: use software beacon timer */
#define IEEE80211_FEXT_DROPUNENC_EAPOL 0x00000800 /* CONF: drop unencrypted eapol frames */
#define IEEE80211_FEXT_APPIE_UPDATE 0x00001000 /* STATE: beacon APP IE updated */
#define IEEE80211_COM_UAPSD_ENABLE(_ic) ((_ic)->ic_flags_ext |= IEEE80211_FEXT_UAPSD)
#define IEEE80211_COM_UAPSD_DISABLE(_ic) ((_ic)->ic_flags_ext &= ~IEEE80211_FEXT_UAPSD)
#define IEEE80211_COM_UAPSD_ENABLED(_ic) ((_ic)->ic_flags_ext & IEEE80211_FEXT_UAPSD)
#define IEEE80211_COM_GOTOSLEEP(_ic) ((_ic)->ic_flags_ext |= IEEE80211_FEXT_GOTOSLEEP)
#define IEEE80211_COM_WAKEUP(_ic) ((_ic)->ic_flags_ext &= ~IEEE80211_FEXT_SLEEP)
#define IEEE80211_COM_IS_SLEEPING(_ic) ((_ic)->ic_flags_ext & IEEE80211_FEXT_SLEEP)
#define IEEE80211_VAP_UAPSD_ENABLE(_v) ((_v)->iv_flags_ext |= IEEE80211_FEXT_UAPSD)
#define IEEE80211_VAP_UAPSD_DISABLE(_v) ((_v)->iv_flags_ext &= ~IEEE80211_FEXT_UAPSD)
#define IEEE80211_VAP_UAPSD_ENABLED(_v) ((_v)->iv_flags_ext & IEEE80211_FEXT_UAPSD)
#define IEEE80211_VAP_GOTOSLEEP(_v) ((_v)->iv_flags_ext |= IEEE80211_FEXT_SLEEP)
#define IEEE80211_VAP_WAKEUP(_v) ((_v)->iv_flags_ext &= ~IEEE80211_FEXT_SLEEP)
#define IEEE80211_VAP_IS_SLEEPING(_v) ((_v)->iv_flags_ext & IEEE80211_FEXT_SLEEP)
#define IEEE80211_VAP_EOSPDROP_ENABLE(_v) ((_v)->iv_flags_ext |= IEEE80211_FEXT_EOSPDROP)
#define IEEE80211_VAP_EOSPDROP_DISABLE(_v) ((_v)->iv_flags_ext &= ~IEEE80211_FEXT_EOSPDROP)
#define IEEE80211_VAP_EOSPDROP_ENABLED(_v) ((_v)->iv_flags_ext & IEEE80211_FEXT_EOSPDROP)
#define IEEE80211_VAP_DROPUNENC_EAPOL_ENABLE(_v) \
((_v)->iv_flags_ext |= IEEE80211_FEXT_DROPUNENC_EAPOL)
#define IEEE80211_VAP_DROPUNENC_EAPOL_DISABLE(_v) \
((_v)->iv_flags_ext &= ~IEEE80211_FEXT_DROPUNENC_EAPOL)
#define IEEE80211_VAP_DROPUNENC_EAPOL(_v) ((_v)->iv_flags_ext & IEEE80211_FEXT_DROPUNENC_EAPOL)
/* ic_caps */
#define IEEE80211_C_WEP 0x00000001 /* CAPABILITY: WEP available */
#define IEEE80211_C_TKIP 0x00000002 /* CAPABILITY: TKIP available */
#define IEEE80211_C_AES 0x00000004 /* CAPABILITY: AES OCB avail */
#define IEEE80211_C_AES_CCM 0x00000008 /* CAPABILITY: AES CCM avail */
#define IEEE80211_C_CKIP 0x00000020 /* CAPABILITY: CKIP available */
#define IEEE80211_C_FF 0x00000040 /* CAPABILITY: ATH FF avail */
#define IEEE80211_C_TURBOP 0x00000080 /* CAPABILITY: ATH Turbo avail*/
#define IEEE80211_C_IBSS 0x00000100 /* CAPABILITY: IBSS available */
#define IEEE80211_C_PMGT 0x00000200 /* CAPABILITY: Power mgmt */
#define IEEE80211_C_HOSTAP 0x00000400 /* CAPABILITY: HOSTAP avail */
#define IEEE80211_C_AHDEMO 0x00000800 /* CAPABILITY: Old Adhoc Demo */
#define IEEE80211_C_SWRETRY 0x00001000 /* CAPABILITY: sw tx retry */
#define IEEE80211_C_TXPMGT 0x00002000 /* CAPABILITY: tx power mgmt */
#define IEEE80211_C_SHSLOT 0x00004000 /* CAPABILITY: short slottime */
#define IEEE80211_C_SHPREAMBLE 0x00008000 /* CAPABILITY: short preamble */
#define IEEE80211_C_MONITOR 0x00010000 /* CAPABILITY: monitor mode */
#define IEEE80211_C_TKIPMIC 0x00020000 /* CAPABILITY: TKIP MIC avail */
#define IEEE80211_C_WPA1 0x00800000 /* CAPABILITY: WPA1 avail */
#define IEEE80211_C_WPA2 0x01000000 /* CAPABILITY: WPA2 avail */
#define IEEE80211_C_WPA 0x01800000 /* CAPABILITY: WPA1+WPA2 avail*/
#define IEEE80211_C_BURST 0x02000000 /* CAPABILITY: frame bursting */
#define IEEE80211_C_WME 0x04000000 /* CAPABILITY: WME avail */
#define IEEE80211_C_WDS 0x08000000 /* CAPABILITY: 4-addr support */
#define IEEE80211_C_WME_TKIPMIC 0x10000000 /* CAPABILITY: TKIP MIC for QoS frame */
#define IEEE80211_C_BGSCAN 0x20000000 /* CAPABILITY: bg scanning */
#define IEEE80211_C_UAPSD 0x40000000 /* CAPABILITY: UAPSD */
/* XXX protection/barker? */
#define IEEE80211_C_CRYPTO 0x0000002f /* CAPABILITY: crypto alg's */
/* Atheros ABOLT definitions */
#define IEEE80211_ABOLT_TURBO_G 0x01 /* Legacy Turbo G */
#define IEEE80211_ABOLT_TURBO_PRIME 0x02 /* Turbo Prime */
#define IEEE80211_ABOLT_COMPRESSION 0x04 /* Compression */
#define IEEE80211_ABOLT_FAST_FRAME 0x08 /* Fast Frames */
#define IEEE80211_ABOLT_BURST 0x10 /* Bursting */
#define IEEE80211_ABOLT_WME_ELE 0x20 /* WME based cwmin/max/burst tuning */
#define IEEE80211_ABOLT_XR 0x40 /* XR */
#define IEEE80211_ABOLT_AR 0x80 /* AR switches out based on adjaced non-turbo traffic */
/* Atheros Advanced Capabilities ABOLT definition */
#define IEEE80211_ABOLT_ADVCAP (IEEE80211_ABOLT_TURBO_PRIME | \
IEEE80211_ABOLT_COMPRESSION | \
IEEE80211_ABOLT_FAST_FRAME | \
IEEE80211_ABOLT_XR | \
IEEE80211_ABOLT_AR | \
IEEE80211_ABOLT_BURST | \
IEEE80211_ABOLT_WME_ELE)
/* check if a capability was negotiated for use */
#define IEEE80211_ATH_CAP(vap, ni, bit) \
((ni)->ni_ath_flags & (vap)->iv_ath_cap & (bit))
/* flags to VAP create function */
#define IEEE80211_VAP_XR 0x10000 /* create a XR VAP without registering net device with OS */
int ieee80211_ifattach(struct ieee80211com *);
void ieee80211_ifdetach(struct ieee80211com *);
int ieee80211_vap_setup(struct ieee80211com *, struct net_device *,
const char *, int, int);
int ieee80211_vap_attach(struct ieee80211vap *, ifm_change_cb_t, ifm_stat_cb_t);
void ieee80211_vap_detach(struct ieee80211vap *);
void ieee80211_mark_dfs(struct ieee80211com *, struct ieee80211_channel *);
void ieee80211_announce(struct ieee80211com *);
void ieee80211_announce_channels(struct ieee80211com *);
int ieee80211_media_change(struct net_device *);
void ieee80211_media_status(struct net_device *, struct ifmediareq *);
int ieee80211_rate2media(struct ieee80211com*, int, enum ieee80211_phymode);
int ieee80211_media2rate(int);
u_int ieee80211_mhz2ieee(u_int, u_int);
u_int ieee80211_chan2ieee(struct ieee80211com *, const struct ieee80211_channel *);
u_int ieee80211_ieee2mhz(u_int, u_int);
struct ieee80211_channel *ieee80211_find_channel(struct ieee80211com *, int, int);
int ieee80211_setmode(struct ieee80211com *, enum ieee80211_phymode);
void ieee80211_reset_erp(struct ieee80211com *, enum ieee80211_phymode);
enum ieee80211_phymode ieee80211_chan2mode(const struct ieee80211_channel *);
void ieee80211_build_countryie(struct ieee80211com *);
int ieee80211_media_setup(struct ieee80211com *, struct ifmedia *, u_int32_t,
ifm_change_cb_t, ifm_stat_cb_t);
void ieee80211_build_sc_ie(struct ieee80211com *);
void ieee80211_dfs_action(struct ieee80211com *);
void ieee80211_expire_channel_excl_restrictions(struct ieee80211com *);
/*
* Iterate through ic_channels to enumerate all distinct ic_ieee channel numbers.
* It relies on the assumption that ic_ieee cannot be 0 and that all the
* duplicates in ic_channels occur subsequently.
*
* _i and _prevchan are temporary variables
*/
#define CHANNEL_FOREACH(_chan, _ic, _i, _prevchan) \
for ((_i) = 0, (_prevchan) = 0; \
(_i) < (_ic)->ic_nchans && ((_chan) = \
(_ic)->ic_channels[(_i)].ic_ieee); \
(_prevchan) = (_chan), (_i)++ \
) if ((_chan) != (_prevchan))
/* Key update synchronization methods. XXX should not be visible. */
static __inline void
ieee80211_key_update_begin(struct ieee80211vap *vap)
{
vap->iv_key_update_begin(vap);
}
static __inline void
ieee80211_key_update_end(struct ieee80211vap *vap)
{
vap->iv_key_update_end(vap);
}
/* XXX these need to be here for IEEE80211_F_DATAPAD */
/*
* Return the space occupied by the 802.11 header and any
* padding required by the driver. This works for a
* management or data frame.
*/
static __inline int
ieee80211_hdrspace(struct ieee80211com *ic, const void *data)
{
int size = ieee80211_hdrsize(data);
if (ic->ic_flags & IEEE80211_F_DATAPAD)
size = roundup(size, sizeof(u_int32_t));
return size;
}
/* Like ieee80211_hdrspace, but handles any type of frame. */
static __inline int
ieee80211_anyhdrspace(struct ieee80211com *ic, const void *data)
{
int size = ieee80211_anyhdrsize(data);
if (ic->ic_flags & IEEE80211_F_DATAPAD)
size = roundup(size, sizeof(u_int32_t));
return size;
}
/* Macros to print MAC address used in 802.11 headers */
#define MAC_FMT "%02x:%02x:%02x:%02x:%02x:%02x"
#define MAC_ADDR(addr) \
((unsigned char *)(addr)) [0], \
((unsigned char *)(addr)) [1], \
((unsigned char *)(addr)) [2], \
((unsigned char *)(addr)) [3], \
((unsigned char *)(addr)) [4], \
((unsigned char *)(addr)) [5]
#endif /* _NET80211_IEEE80211_VAR_H_ */