madwifi/net80211/ieee80211_monitor.c

602 lines
17 KiB
C
Raw Normal View History

/*-
* Copyright (c) 2005 John Bicket
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $Id$
*/
#ifndef EXPORT_SYMTAB
#define EXPORT_SYMTAB
#endif
/*
* IEEE 802.11 monitor mode
*/
#ifndef AUTOCONF_INCLUDED
#include <linux/config.h>
#endif
#include <linux/version.h>
#include <linux/module.h>
#include <linux/kmod.h>
#include <linux/init.h>
#include <linux/skbuff.h>
#include <linux/sysctl.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/if_vlan.h>
#include <net/iw_handler.h>
#include <linux/wireless.h>
#include <linux/if_arp.h> /* for ARPHRD_* */
#include <asm/uaccess.h>
#include "if_media.h"
#include "if_ethersubr.h"
#include <net80211/ieee80211_var.h>
#include <net80211/ieee80211_monitor.h>
#include <ath/if_athvar.h>
static int
ratecode_to_dot11(int ratecode)
{
switch (ratecode) {
/* a */
case 0x0b: return 12;
case 0x0f: return 18;
case 0x0a: return 24;
case 0x0e: return 36;
case 0x09: return 48;
case 0x0d: return 72;
case 0x08: return 96;
case 0x0c: return 108;
case 0x1b: return 2;
case 0x1a: return 4;
case 0x1e: return 4;
case 0x19: return 11;
case 0x1d: return 11;
case 0x18: return 22;
case 0x1c: return 22;
}
return 0;
}
struct ar5212_openbsd_desc {
/*
* tx_control_0
*/
u_int32_t frame_len:12;
u_int32_t reserved_12_15:4;
u_int32_t xmit_power:6;
u_int32_t rts_cts_enable:1;
u_int32_t veol:1;
u_int32_t clear_dest_mask:1;
u_int32_t ant_mode_xmit:4;
u_int32_t inter_req:1;
u_int32_t encrypt_key_valid:1;
u_int32_t cts_enable:1;
u_int32_t r1;
/*
* tx_control_2
*/
u_int32_t rts_duration:15;
u_int32_t duration_update_enable:1;
u_int32_t xmit_tries0:4;
u_int32_t xmit_tries1:4;
u_int32_t xmit_tries2:4;
u_int32_t xmit_tries3:4;
/*
* tx_control_3
*/
u_int32_t xmit_rate0:5;
u_int32_t xmit_rate1:5;
u_int32_t xmit_rate2:5;
u_int32_t xmit_rate3:5;
u_int32_t rts_cts_rate:5;
u_int32_t reserved_25_31:7;
};
void
ieee80211_monitor_encap(struct ieee80211vap *vap, struct sk_buff *skb)
{
struct ieee80211_phy_params *ph =
(struct ieee80211_phy_params *) (SKB_CB(skb) + sizeof(struct ieee80211_cb));
SKB_CB(skb)->flags = M_RAW;
SKB_CB(skb)->ni = NULL;
SKB_CB(skb)->next = NULL;
memset(ph, 0, sizeof(struct ieee80211_phy_params));
/* send at a static rate if it is configured */
ph->rate0 = vap->iv_fixed_rate > 0 ? vap->iv_fixed_rate : 2;
/* don't retry control packets */
ph->try0 = 11;
ph->power = 60;
switch (skb->dev->type) {
case ARPHRD_IEEE80211: {
struct ieee80211_frame *wh = (struct ieee80211_frame *) skb->data;
if ((wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK) == IEEE80211_FC0_TYPE_CTL)
ph->try0 = 1;
break;
}
case ARPHRD_IEEE80211_PRISM: {
struct ieee80211_frame *wh = NULL;
struct wlan_ng_prism2_header *p2h =
(struct wlan_ng_prism2_header *) skb->data;
/* does it look like there is a prism header here? */
if (skb->len > sizeof(struct wlan_ng_prism2_header) &&
p2h->msgcode == DIDmsg_lnxind_wlansniffrm &&
p2h->rate.did == DIDmsg_lnxind_wlansniffrm_rate) {
ph->rate0 = p2h->rate.data;
skb_pull(skb, sizeof(struct wlan_ng_prism2_header));
}
wh = (struct ieee80211_frame *) skb->data;
if ((wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK) == IEEE80211_FC0_TYPE_CTL)
ph->try0 = 1;
break;
}
case ARPHRD_IEEE80211_RADIOTAP: {
struct ieee80211_frame *wh = NULL;
struct ieee80211_radiotap_header *rh =
(struct ieee80211_radiotap_header *)skb->data;
u_int32_t present, present_ext;
u_int16_t len;
u_int8_t *start = skb->data + sizeof(struct ieee80211_radiotap_header);
u_int8_t *p = start;
u_int8_t *end = skb->data + skb->len;
u_int8_t bit, flags = 0;
if (skb->len < sizeof(*rh) || rh->it_version != 0)
break;
present_ext = present = le32_to_cpu(rh->it_present);
len = le16_to_cpu(rh->it_len);
if (skb->len < len)
break;
/* skip the chain of additional bitmaps following it_present */
while (present_ext & (1 << IEEE80211_RADIOTAP_EXT)) {
if (p+4 > end) {
/* An extended bitmap would now follow, but there is
* no place for it. Stop parsing. */
present = 0;
break;
}
present_ext = le32_to_cpu(*(__le32 *)p);
p += 4;
}
for (bit = 0; present && p < end; present >>= 1, bit++) {
if ((present & 1) == 0)
continue;
switch (bit) {
case IEEE80211_RADIOTAP_RATE:
ph->rate0 = *p;
p++;
break;
case IEEE80211_RADIOTAP_DBM_TX_POWER:
ph->power = *p;
p++;
break;
case IEEE80211_RADIOTAP_FLAGS:
flags = *p;
p++;
break;
case IEEE80211_RADIOTAP_DB_ANTSIGNAL:
case IEEE80211_RADIOTAP_DB_ANTNOISE:
case IEEE80211_RADIOTAP_ANTENNA:
case IEEE80211_RADIOTAP_DBM_ANTSIGNAL:
case IEEE80211_RADIOTAP_DBM_ANTNOISE:
/* 8-bit */
p++;
break;
case IEEE80211_RADIOTAP_FHSS:
/* 2 x 8-bit */
p += 2;
break;
case IEEE80211_RADIOTAP_LOCK_QUALITY:
case IEEE80211_RADIOTAP_TX_ATTENUATION:
case IEEE80211_RADIOTAP_DB_TX_ATTENUATION:
/* 16-bit */
p = start + roundup(p - start, 2) + 2;
break;
case IEEE80211_RADIOTAP_CHANNEL:
/* 2 x 16-bit */
p = start + roundup(p - start, 2) + 4;
break;
case IEEE80211_RADIOTAP_TSFT:
/* 64-bit */
p = start + roundup(p - start, 8) + 8;
break;
case IEEE80211_RADIOTAP_DATA_RETRIES:
ph->try0 = *p + 1;
p++;
break;
default:
present = 0;
break;
}
}
skb_pull(skb, len);
if (flags & IEEE80211_RADIOTAP_F_FCS)
/* Remove FCS from the end of frames to transmit */
skb_trim(skb, skb->len - IEEE80211_CRC_LEN);
wh = (struct ieee80211_frame *)skb->data;
if (!ph->try0 &&
(wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK) == IEEE80211_FC0_TYPE_CTL)
ph->try0 = 1;
break;
}
case ARPHRD_IEEE80211_ATHDESC: {
if (skb->len > ATHDESC_HEADER_SIZE) {
struct ar5212_openbsd_desc *desc =
(struct ar5212_openbsd_desc *) (skb->data + 8);
ph->power = desc->xmit_power;
ph->rate0 = ratecode_to_dot11(desc->xmit_rate0);
ph->rate1 = ratecode_to_dot11(desc->xmit_rate1);
ph->rate2 = ratecode_to_dot11(desc->xmit_rate2);
ph->rate3 = ratecode_to_dot11(desc->xmit_rate3);
ph->try0 = desc->xmit_tries0;
ph->try1 = desc->xmit_tries1;
ph->try2 = desc->xmit_tries2;
ph->try3 = desc->xmit_tries3;
skb_pull(skb, ATHDESC_HEADER_SIZE);
}
break;
}
default:
break;
}
if (!ph->rate0) {
ph->rate0 = 0;
ph->try0 = 11;
}
}
EXPORT_SYMBOL(ieee80211_monitor_encap);
/*
* Context: softIRQ (tasklet)
*/
void
ieee80211_input_monitor(struct ieee80211com *ic, struct sk_buff *skb,
const struct ath_buf *bf, int tx, u_int64_t mactime, struct ath_softc *sc)
{
struct ieee80211vap *vap, *next;
struct ath_desc *ds = bf->bf_desc;
int noise = 0, antenna = 0, ieeerate = 0;
u_int32_t rssi = 0;
u_int8_t pkttype = 0;
unsigned int mon_hdrspace = A_MAX(sizeof(struct ath_tx_radiotap_header),
(A_MAX(sizeof(struct wlan_ng_prism2_header),
ATHDESC_HEADER_SIZE)));
if ((skb_headroom(skb) < mon_hdrspace) &&
pskb_expand_head(skb, mon_hdrspace, 0, GFP_ATOMIC)) {
printk("No headroom for monitor header - %s:%d %s\n",
__FILE__, __LINE__, __func__);
return;
}
if (tx) {
rssi = bf->bf_dsstatus.ds_txstat.ts_rssi;
antenna = bf->bf_dsstatus.ds_txstat.ts_antenna;
ieeerate = sc->sc_hwmap[bf->bf_dsstatus.ds_txstat.ts_rate].ieeerate;
} else {
rssi = bf->bf_dsstatus.ds_rxstat.rs_rssi;
antenna = bf->bf_dsstatus.ds_rxstat.rs_antenna;
ieeerate = sc->sc_hwmap[bf->bf_dsstatus.ds_rxstat.rs_rate].ieeerate;
}
noise = bf->bf_channoise;
/* XXX locking */
for (vap = TAILQ_FIRST(&ic->ic_vaps); vap != NULL; vap = next) {
struct sk_buff *skb1;
struct net_device *dev = vap->iv_dev;
struct ieee80211_frame *wh = (struct ieee80211_frame *)skb->data;
u_int8_t dir = wh->i_fc[1] & IEEE80211_FC1_DIR_MASK;
next = TAILQ_NEXT(vap, iv_next);
/* If we have rx'd an error frame... */
if (!tx && bf->bf_dsstatus.ds_rxstat.rs_status != 0) {
/* Discard PHY errors if necessary */
if (bf->bf_dsstatus.ds_rxstat.rs_status & HAL_RXERR_PHY) {
if (vap->iv_monitor_phy_errors == 0) continue;
}
/* Discard CRC errors if necessary */
if (bf->bf_dsstatus.ds_rxstat.rs_status & HAL_RXERR_CRC) {
if (vap->iv_monitor_crc_errors == 0) continue;
}
/* Accept PHY, CRC and decrypt errors. Discard the rest. */
if (bf->bf_dsstatus.ds_rxstat.rs_status &~
(HAL_RXERR_DECRYPT | HAL_RXERR_MIC |
HAL_RXERR_PHY | HAL_RXERR_CRC))
continue;
/* We can't use addr1 to determine direction at this point */
pkttype = PACKET_HOST;
} else {
/*
* The frame passed its CRC, so we can rely
* on the contents of the frame to set pkttype.
*/
if (tx)
pkttype = PACKET_OUTGOING;
else if (IEEE80211_IS_MULTICAST(wh->i_addr1)) {
if (IEEE80211_ADDR_EQ(wh->i_addr1, dev->broadcast))
pkttype = PACKET_BROADCAST;
else
pkttype = PACKET_MULTICAST;
} else
pkttype = PACKET_HOST;
}
if (vap->iv_opmode != IEEE80211_M_MONITOR ||
vap->iv_state != IEEE80211_S_RUN)
continue;
if (vap->iv_monitor_nods_only &&
dir != IEEE80211_FC1_DIR_NODS) {
/* don't rx fromds, tods, or dstods packets */
continue;
}
skb1 = skb_copy(skb, GFP_ATOMIC);
if (skb1 == NULL) {
/* XXX stat+msg */
continue;
}
ieee80211_skb_copy_noderef(skb, skb1);
if (vap->iv_monitor_txf_len && tx) {
/* truncate transmit feedback packets */
skb_trim(skb1, vap->iv_monitor_txf_len);
skb_reset_network_header(skb1);
}
switch (vap->iv_dev->type) {
case ARPHRD_IEEE80211:
break;
case ARPHRD_IEEE80211_PRISM: {
struct wlan_ng_prism2_header *ph;
if (skb_headroom(skb1) < sizeof(struct wlan_ng_prism2_header)) {
This patch augments the current reference counting code with: * Counters for total outstanding instances for each resource type (skb, ath_node and ath_buf) * One pair of acquisition/release functions per resource type in unlocked and one in locked * Adds some more _debug versions of functions in the call chain that acquire/release resources so that the original func/line in the driver as well as the func/line that affected the resource use can be shown in the trace. Intermediate stack frames aren't necessary to trace the leaks. * Changes naming convention for "lock-required" functions to suffix _locked for the versions that expect locking, to be consistent with some other places in the code. * Consolidate debug messages to the helper functions that actually affect the reference count or acquire/release a resource * Additional sanity checks and leak detection (esp for detecting node ref leaks through skb) * skb references are nulled out by the new sbk unref/free function. I've tested these changes extensively and found lots of cases where we didn't get enough node references when cloning skbuff, and where the kernel drops packets due to performance issues and leaks our node references. With these changes and the tracing enabled I have verified that: * TX BUF: tx buffers always go down to zero when the tx queue is done, and you can watch tx queue usage ratio go up and down again as the driver is working. There are no leaks here at the moment, although there *are* some in the madwifi-dfs branch during CAC at the moment. * skbuff leaks in all the common flows are fixed. We were leaking node references in a lot of places where kernel was dropping skb's due to congestion and we were failing to increment node references when cloning skbuffs. These are now detected, as are skbuffs that are reaped by the kernel while still holding a node reference. * the ath_node count works correctly and on an idle system we get about 5 references per station table node, with 2 node instances per VAP. One for the bss and one for the node in the station table, I believe. The ath_node count goes up and down but always lands back at the stable number based on the vaps you have configured and the number of actual stations in the station table. The point here is that it's pretty constant what you will see over time, despite excessive node creation/release in our code during input (esp input_all). Thank god for the slab allocator. git-svn-id: http://madwifi-project.org/svn/madwifi/trunk@2902 0192ed92-7a03-0410-a25b-9323aeb14dbd
2007-11-21 23:14:11 +03:00
ieee80211_dev_kfree_skb(&skb1);
break;
}
ph = (struct wlan_ng_prism2_header *)
skb_push(skb1, sizeof(struct wlan_ng_prism2_header));
memset(ph, 0, sizeof(struct wlan_ng_prism2_header));
ph->msgcode = DIDmsg_lnxind_wlansniffrm;
ph->msglen = sizeof(struct wlan_ng_prism2_header);
strncpy(ph->devname, dev->name, sizeof(ph->devname));
ph->hosttime.did = DIDmsg_lnxind_wlansniffrm_hosttime;
ph->hosttime.status = 0;
ph->hosttime.len = 4;
ph->hosttime.data = jiffies;
/* Pass up tsf clock in mactime */
/* NB: the prism mactime field is 32bit, so we lose TSF precision here */
ph->mactime.did = DIDmsg_lnxind_wlansniffrm_mactime;
ph->mactime.status = 0;
ph->mactime.len = 4;
ph->mactime.data = mactime;
ph->istx.did = DIDmsg_lnxind_wlansniffrm_istx;
ph->istx.status = 0;
ph->istx.len = 4;
ph->istx.data = tx ? P80211ENUM_truth_true : P80211ENUM_truth_false;
ph->frmlen.did = DIDmsg_lnxind_wlansniffrm_frmlen;
ph->frmlen.status = 0;
ph->frmlen.len = 4;
ph->frmlen.data = skb->len;
ph->channel.did = DIDmsg_lnxind_wlansniffrm_channel;
ph->channel.status = 0;
ph->channel.len = 4;
ph->channel.data =
ieee80211_mhz2ieee(ic->ic_curchan->ic_freq,
ic->ic_curchan->ic_flags);
ph->rssi.did = DIDmsg_lnxind_wlansniffrm_rssi;
ph->rssi.status = 0;
ph->rssi.len = 4;
ph->rssi.data = rssi;
ph->noise.did = DIDmsg_lnxind_wlansniffrm_noise;
ph->noise.status = 0;
ph->noise.len = 4;
ph->noise.data = noise;
ph->signal.did = DIDmsg_lnxind_wlansniffrm_signal;
ph->signal.status = 0;
ph->signal.len = 4;
ph->signal.data = rssi + noise;
ph->rate.did = DIDmsg_lnxind_wlansniffrm_rate;
ph->rate.status = 0;
ph->rate.len = 4;
ph->rate.data = ieeerate;
break;
}
case ARPHRD_IEEE80211_RADIOTAP: {
if (tx) {
struct ath_tx_radiotap_header *th;
if (skb_headroom(skb1) < sizeof(struct ath_tx_radiotap_header)) {
printk("%s:%d %s\n", __FILE__, __LINE__, __func__);
This patch augments the current reference counting code with: * Counters for total outstanding instances for each resource type (skb, ath_node and ath_buf) * One pair of acquisition/release functions per resource type in unlocked and one in locked * Adds some more _debug versions of functions in the call chain that acquire/release resources so that the original func/line in the driver as well as the func/line that affected the resource use can be shown in the trace. Intermediate stack frames aren't necessary to trace the leaks. * Changes naming convention for "lock-required" functions to suffix _locked for the versions that expect locking, to be consistent with some other places in the code. * Consolidate debug messages to the helper functions that actually affect the reference count or acquire/release a resource * Additional sanity checks and leak detection (esp for detecting node ref leaks through skb) * skb references are nulled out by the new sbk unref/free function. I've tested these changes extensively and found lots of cases where we didn't get enough node references when cloning skbuff, and where the kernel drops packets due to performance issues and leaks our node references. With these changes and the tracing enabled I have verified that: * TX BUF: tx buffers always go down to zero when the tx queue is done, and you can watch tx queue usage ratio go up and down again as the driver is working. There are no leaks here at the moment, although there *are* some in the madwifi-dfs branch during CAC at the moment. * skbuff leaks in all the common flows are fixed. We were leaking node references in a lot of places where kernel was dropping skb's due to congestion and we were failing to increment node references when cloning skbuffs. These are now detected, as are skbuffs that are reaped by the kernel while still holding a node reference. * the ath_node count works correctly and on an idle system we get about 5 references per station table node, with 2 node instances per VAP. One for the bss and one for the node in the station table, I believe. The ath_node count goes up and down but always lands back at the stable number based on the vaps you have configured and the number of actual stations in the station table. The point here is that it's pretty constant what you will see over time, despite excessive node creation/release in our code during input (esp input_all). Thank god for the slab allocator. git-svn-id: http://madwifi-project.org/svn/madwifi/trunk@2902 0192ed92-7a03-0410-a25b-9323aeb14dbd
2007-11-21 23:14:11 +03:00
ieee80211_dev_kfree_skb(&skb1);
break;
}
th = (struct ath_tx_radiotap_header *) skb_push(skb1,
sizeof(struct ath_tx_radiotap_header));
memset(th, 0, sizeof(struct ath_tx_radiotap_header));
th->wt_ihdr.it_version = 0;
th->wt_ihdr.it_len = cpu_to_le16(sizeof(struct ath_tx_radiotap_header));
th->wt_ihdr.it_present = cpu_to_le32(ATH_TX_RADIOTAP_PRESENT);
/* radiotap's TSF field is the full 64 bits, so we don't lose
* any TSF precision when using radiotap */
th->wt_tsft = cpu_to_le64(mactime);
th->wt_flags = 0;
th->wt_rate = ieeerate;
th->wt_antenna = antenna;
th->wt_pad = 0;
if (bf->bf_dsstatus.ds_txstat.ts_status & HAL_TXERR_XRETRY)
th->wt_txflags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_FAIL);
th->wt_dataretries = bf->bf_dsstatus.ds_txstat.ts_shortretry + bf->bf_dsstatus.ds_txstat.ts_longretry;
} else {
struct ath_rx_radiotap_header *th;
if (skb_headroom(skb1) < sizeof(struct ath_rx_radiotap_header)) {
printk("%s:%d %s\n", __FILE__, __LINE__, __func__);
This patch augments the current reference counting code with: * Counters for total outstanding instances for each resource type (skb, ath_node and ath_buf) * One pair of acquisition/release functions per resource type in unlocked and one in locked * Adds some more _debug versions of functions in the call chain that acquire/release resources so that the original func/line in the driver as well as the func/line that affected the resource use can be shown in the trace. Intermediate stack frames aren't necessary to trace the leaks. * Changes naming convention for "lock-required" functions to suffix _locked for the versions that expect locking, to be consistent with some other places in the code. * Consolidate debug messages to the helper functions that actually affect the reference count or acquire/release a resource * Additional sanity checks and leak detection (esp for detecting node ref leaks through skb) * skb references are nulled out by the new sbk unref/free function. I've tested these changes extensively and found lots of cases where we didn't get enough node references when cloning skbuff, and where the kernel drops packets due to performance issues and leaks our node references. With these changes and the tracing enabled I have verified that: * TX BUF: tx buffers always go down to zero when the tx queue is done, and you can watch tx queue usage ratio go up and down again as the driver is working. There are no leaks here at the moment, although there *are* some in the madwifi-dfs branch during CAC at the moment. * skbuff leaks in all the common flows are fixed. We were leaking node references in a lot of places where kernel was dropping skb's due to congestion and we were failing to increment node references when cloning skbuffs. These are now detected, as are skbuffs that are reaped by the kernel while still holding a node reference. * the ath_node count works correctly and on an idle system we get about 5 references per station table node, with 2 node instances per VAP. One for the bss and one for the node in the station table, I believe. The ath_node count goes up and down but always lands back at the stable number based on the vaps you have configured and the number of actual stations in the station table. The point here is that it's pretty constant what you will see over time, despite excessive node creation/release in our code during input (esp input_all). Thank god for the slab allocator. git-svn-id: http://madwifi-project.org/svn/madwifi/trunk@2902 0192ed92-7a03-0410-a25b-9323aeb14dbd
2007-11-21 23:14:11 +03:00
ieee80211_dev_kfree_skb(&skb1);
break;
}
th = (struct ath_rx_radiotap_header *) skb_push(skb1,
sizeof(struct ath_rx_radiotap_header));
memset(th, 0, sizeof(struct ath_rx_radiotap_header));
th->wr_ihdr.it_version = 0;
th->wr_ihdr.it_len = cpu_to_le16(sizeof(struct ath_rx_radiotap_header));
th->wr_ihdr.it_present = cpu_to_le32(ATH_RX_RADIOTAP_PRESENT);
if (ic->ic_flags & IEEE80211_F_SHPREAMBLE)
th->wr_flags |= IEEE80211_RADIOTAP_F_SHORTPRE;
if (bf->bf_dsstatus.ds_rxstat.rs_status & HAL_RXERR_CRC)
th->wr_flags |= IEEE80211_RADIOTAP_F_BADFCS;
if (skb->len >= IEEE80211_CRC_LEN)
th->wr_flags |= IEEE80211_RADIOTAP_F_FCS;
th->wr_rate = ieeerate;
th->wr_chan_freq = cpu_to_le16(ic->ic_curchan->ic_freq);
/* Define the channel flags for radiotap */
switch (sc->sc_curmode) {
case IEEE80211_MODE_11A:
th->wr_chan_flags =
cpu_to_le16(IEEE80211_CHAN_A);
break;
case IEEE80211_MODE_TURBO_A:
th->wr_chan_flags =
cpu_to_le16(IEEE80211_CHAN_TA);
break;
case IEEE80211_MODE_11B:
th->wr_chan_flags =
cpu_to_le16(IEEE80211_CHAN_B);
break;
case IEEE80211_MODE_11G:
th->wr_chan_flags =
cpu_to_le16(IEEE80211_CHAN_G);
break;
case IEEE80211_MODE_TURBO_G:
th->wr_chan_flags =
cpu_to_le16(IEEE80211_CHAN_TG);
break;
default:
th->wr_chan_flags = 0; /* unknown */
break;
}
th->wr_dbm_antnoise = (int8_t) noise;
th->wr_dbm_antsignal =
th->wr_dbm_antnoise + rssi;
th->wr_antenna = antenna;
th->wr_antsignal = rssi;
th->wr_tsft = cpu_to_le64(mactime);
}
break;
}
case ARPHRD_IEEE80211_ATHDESC: {
if (skb_headroom(skb1) < ATHDESC_HEADER_SIZE) {
printk("%s:%d %s\n", __FILE__,
__LINE__, __func__);
This patch augments the current reference counting code with: * Counters for total outstanding instances for each resource type (skb, ath_node and ath_buf) * One pair of acquisition/release functions per resource type in unlocked and one in locked * Adds some more _debug versions of functions in the call chain that acquire/release resources so that the original func/line in the driver as well as the func/line that affected the resource use can be shown in the trace. Intermediate stack frames aren't necessary to trace the leaks. * Changes naming convention for "lock-required" functions to suffix _locked for the versions that expect locking, to be consistent with some other places in the code. * Consolidate debug messages to the helper functions that actually affect the reference count or acquire/release a resource * Additional sanity checks and leak detection (esp for detecting node ref leaks through skb) * skb references are nulled out by the new sbk unref/free function. I've tested these changes extensively and found lots of cases where we didn't get enough node references when cloning skbuff, and where the kernel drops packets due to performance issues and leaks our node references. With these changes and the tracing enabled I have verified that: * TX BUF: tx buffers always go down to zero when the tx queue is done, and you can watch tx queue usage ratio go up and down again as the driver is working. There are no leaks here at the moment, although there *are* some in the madwifi-dfs branch during CAC at the moment. * skbuff leaks in all the common flows are fixed. We were leaking node references in a lot of places where kernel was dropping skb's due to congestion and we were failing to increment node references when cloning skbuffs. These are now detected, as are skbuffs that are reaped by the kernel while still holding a node reference. * the ath_node count works correctly and on an idle system we get about 5 references per station table node, with 2 node instances per VAP. One for the bss and one for the node in the station table, I believe. The ath_node count goes up and down but always lands back at the stable number based on the vaps you have configured and the number of actual stations in the station table. The point here is that it's pretty constant what you will see over time, despite excessive node creation/release in our code during input (esp input_all). Thank god for the slab allocator. git-svn-id: http://madwifi-project.org/svn/madwifi/trunk@2902 0192ed92-7a03-0410-a25b-9323aeb14dbd
2007-11-21 23:14:11 +03:00
ieee80211_dev_kfree_skb(&skb1);
break;
}
memcpy(skb_push(skb1, ATHDESC_HEADER_SIZE),
ds, ATHDESC_HEADER_SIZE);
break;
}
default:
break;
}
if (skb1 != NULL) {
if (!tx && (skb1->len >= IEEE80211_CRC_LEN) &&
(vap->iv_dev->type !=
ARPHRD_IEEE80211_RADIOTAP)) {
/* Remove FCS from end of RX frames when
* delivering to non-Radiotap VAPs. */
skb_trim(skb1, skb1->len - IEEE80211_CRC_LEN);
}
skb1->dev = dev; /* NB: deliver to wlanX */
skb_reset_mac_header(skb1);
skb1->ip_summed = CHECKSUM_NONE;
skb1->pkt_type = pkttype;
skb1->protocol =
__constant_htons(0x0019); /* ETH_P_80211_RAW */
if (netif_rx(skb1) == NET_RX_DROP) {
/* If netif_rx dropped the packet because
* device was too busy, reclaim the ref. in
* the skb. */
if (SKB_CB(skb1)->ni != NULL)
ieee80211_unref_node(&SKB_CB(skb1)->ni);
vap->iv_devstats.rx_dropped++;
}
vap->iv_devstats.rx_packets++;
vap->iv_devstats.rx_bytes += skb1->len;
}
}
}
EXPORT_SYMBOL(ieee80211_input_monitor);