madwifi/ath_hal/ah_eeprom_v1.h

100 lines
3.8 KiB
C
Raw Normal View History

/*
* Copyright (c) 2002-2008 Sam Leffler, Errno Consulting
* Copyright (c) 2002-2008 Atheros Communications, Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
* $Id: ah_eeprom_v1.h,v 1.1 2008/11/11 02:40:11 sam Exp $
*/
#ifndef _ATH_AH_EEPROM_V1_H_
#define _ATH_AH_EEPROM_V1_H_
#include "ah_eeprom.h"
/*
* EEPROM defines for Version 1 Crete EEPROM.
*
* The EEPROM is segmented into three sections:
*
* PCI/Cardbus default configuration settings
* Cardbus CIS tuples and vendor-specific data
* Atheros-specific data
*
* EEPROM entries are read 32-bits at a time through the PCI bus
* interface but are all 16-bit values.
*
* Access to the Atheros-specific data is controlled by protection
* bits and the data is checksum'd. The driver reads the Atheros
* data from the EEPROM at attach and caches it in its private state.
* This data includes the local regulatory domain, channel calibration
* settings, and phy-related configuration settings.
*/
#define AR_EEPROM_MAC(i) (0x1f-(i))/* MAC address word */
#define AR_EEPROM_MAGIC 0x3d /* magic number */
#define AR_EEPROM_PROTECT 0x3f /* Atheros segment protect register */
#define AR_EEPROM_PROTOTECT_WP_128_191 0x80
#define AR_EEPROM_REG_DOMAIN 0xbf /* Current regulatory domain register */
#define AR_EEPROM_ATHEROS_BASE 0xc0 /* Base of Atheros-specific data */
#define AR_EEPROM_ATHEROS_MAX 64 /* 64x2=128 bytes of EEPROM settings */
#define AR_EEPROM_ATHEROS(n) (AR_EEPROM_ATHEROS_BASE+(n))
#define AR_EEPROM_VERSION AR_EEPROM_ATHEROS(1)
#define AR_EEPROM_ATHEROS_TP_SETTINGS 0x09 /* Transmit power settings */
#define AR_REG_DOMAINS_MAX 4 /* # of Regulatory Domains */
#define AR_CHANNELS_MAX 5 /* # of Channel calibration groups */
#define AR_TP_SETTINGS_SIZE 11 /* # locations/Channel group */
#define AR_TP_SCALING_ENTRIES 11 /* # entries in transmit power dBm->pcdac */
/*
* NB: we store the rfsilent select+polarity data packed
* with the encoding used in later parts so values
* returned to applications are consistent.
*/
#define AR_EEPROM_RFSILENT_GPIO_SEL 0x001c
#define AR_EEPROM_RFSILENT_GPIO_SEL_S 2
#define AR_EEPROM_RFSILENT_POLARITY 0x0002
#define AR_EEPROM_RFSILENT_POLARITY_S 1
#define AR_I2DBM(x) ((uint8_t)((x * 2) + 3))
/*
* Transmit power and channel calibration settings.
*/
struct tpcMap {
uint8_t pcdac[AR_TP_SCALING_ENTRIES];
uint8_t gainF[AR_TP_SCALING_ENTRIES];
uint8_t rate36;
uint8_t rate48;
uint8_t rate54;
uint8_t regdmn[AR_REG_DOMAINS_MAX];
};
/*
* Information retrieved from EEPROM.
*/
typedef struct {
uint16_t ee_version; /* Version field */
uint16_t ee_protect; /* EEPROM protect field */
uint16_t ee_antenna; /* Antenna Settings */
uint16_t ee_biasCurrents; /* OB, DB */
uint8_t ee_thresh62; /* thresh62 */
uint8_t ee_xlnaOn; /* External LNA timing */
uint8_t ee_xpaOff; /* Extern output stage timing */
uint8_t ee_xpaOn; /* Extern output stage timing */
uint8_t ee_rfKill; /* Single low bit signalling if RF Kill is implemented */
uint8_t ee_devType; /* Type: PCI, miniPCI, CB */
uint8_t ee_regDomain[AR_REG_DOMAINS_MAX];
/* calibrated reg domains */
struct tpcMap ee_tpc[AR_CHANNELS_MAX];
} HAL_EEPROM_v1;
#endif /* _ATH_AH_EEPROM_V1_H_ */