madwifi/INSTALL

MADWIFI: Multimode Atheros Driver for WiFi on Linux
===================================================

* Copyright (c) 2002-2005 Sam Leffler.  All rights reserved.

Read the file COPYRIGHT for the complete copyright.


Requirements
------------

- Configured kernel sources of the target kernel.  Most Linux
  distributions provide a kernel development package - it should
  suffice.

- Wireless Extensions support - option CONFIG_NET_RADIO or
  CONFIG_WIRELESS_EXT in kernel .config file, whichever is available.

- Sysctl support - option CONFIG_SYSCTL in kernel .config file.

- Crypto API support - option CONFIG_CRYPTO in kernel .config file (AES
  support is used if present, otherwise the AES-CCMP cipher module falls
  back to a private implementation).

- gcc of the same version that was used to compile the kernel.  At least
  make sure that the first two version numbers or the compiler are the
  same (e.g. it's OK to use gcc 3.4.6 to compile MadWifi if the kernel
  was compiled by gcc 3.4.2).  Ignoring this rule will cause "Invalid
  module format" errors during module load.

Linux 2.4.x kernels starting with 2.4.22 and 2.6 kernels should work
without problems.  Due to quick pace of Linux development, there is no
way compatibility with the future 2.6 kernels can be ensured.  However,
the latest 2.6 kernel at the time of the release should be expected to
work.  For AHB support, Linux 2.6.19 or newer is required.

Automatic module loading support (CONFIG_KMOD) is highly recommended;
otherwise, you'll need to load all required modules manually.


Building the driver
-------------------

The driver is built using the Linux kernel build mechanism.  This means
you must have some part of the kernel source distribution installed on
the machine where you want to build the driver.  In particular, the
kernel include files, makefiles, build scripts and configuration must be
available.

This will be present if you built your kernel from source.  Otherwise
you may need to install an additional kernel development package from
your distribution that would match your kernel.  For example, the
development package for the default kernel is called linux-headers on
Debian and kernel-devel on Fedora Core.  Installing a package with full
kernel sources should not be generally necessary.

Note: in the following examples "$" stands for your system prompt;
you're not expected to type that as part of the actual command.  "#"
stands for the command prompt when the commands must be executed by
root.

Most people can just type:

  $ make

in the top-level MadWifi source directory to build all the modules for
the currently running system.

You MUST do a "make clean" before compiling for a different version of
Linux, e.g. building for 2.6 after building for 2.4.

If you want to compile MadWifi for a different kernel, you need to
specify the location of the kernel build tree, e.g.:

  $ make KERNELPATH=/usr/src/linux-2.6.3

Note that you can also specify this path by setting an environment
variable; e.g.

  $ export KERNELPATH=/usr/src/linux-2.6.3
  $ make

If the kernel was built outside the source directory, KERNELPATH should
point to the output directory where .config is located, not to the
sources.


Cross-compiling
---------------

The build system is designed to support cross-compiling without any
modification to the distribution files.  It should be sufficient to
specify any parameters on the make command line.

In most cases, only KERNELPATH, ARCH and CROSS_COMPILE need to be
defined.  ARCH is the architecture of the kernel.  CROSS_COMPILE is the
prefix for cross-compiling tools.  For instance, if compiling for ARM
and the cross compiler is called arm-linux-gcc, set ARCH to "arm" and
CROSS_COMPILE to "arm-linux-":

  $ make KERNELPATH=/usr/src/linux-arm ARCH=arm CROSS_COMPILE=arm-linux-

If the compiler needs additional flags to compile userspace binaries,
you can redefine CC to include those flags.

When installing MadWifi, set DESTDIR to the root of the target
filesystem, so that the cross-compiled binaries don't overwrite the
native ones.


Loading the modules
-------------------

Building the software will generate numerous loadable modules:

  ath_pci		Atheros driver for PCI/Cardbus devices
  ath_hal		Atheros HAL
  wlan			802.11 support layer
  wlan_wep		WEP cipher support
  wlan_tkip		TKIP cipher support
  wlan_ccmp		AES-CCMP cipher support
  wlan_xauth		external authenticator
  wlan_acl		MAC ACL support for AP operation
  wlan_scan_ap		AP scanning support
  wlan_scan_sta		station scanning support
  ath_rate_onoe		ONOE rate control
  ath_rate_amrr		AMRR rate control
  ath_rate_sample	SAMPLE rate control

The ath_pci module must be loaded either manually or by the system, e.g.
through the hotplug or card manager support.  The remaining modules are
loaded automatically as needed, so after doing a "make install" you only
need to run following:

  # modprobe ath_pci

For automatic module loading you may need to modify your system's
configuration files so the necessary modules are loaded when an Atheros
device is recognized.  The exact procedure varies from system to system.

There are module parameters available to fit your needs, e.g. you can
set the countrycode manually if your card's EEPROM does not contain the
correct one for your location.  See
http://www.unicode.org/onlinedat/countries.html to find your code.

To activate German frequencies you would specify:

  # modprobe ath_pci countrycode=276

MadWifi currently provides four different rate control algorithms,
ONOE, AMRR, SAMPLE and MINSTREL.  SAMPLE and MINSTREL are both very
advanced, but MINSTREL is quite new.  Consequently, SAMPLE is used by
default.  In order to make MadWifi use e.g. AMRR instead, you have to
specify that as the module parameter e.g.

  # modprobe ath_pci ratectl=amrr

NOTE: Changing the rate control is only required (and recommended) for
      users who want to setup an access point using MadWifi in difficult
      (e.g. lossy) environments and who know what they are doing.

To see all available module parameters type:

  $ modinfo ath_pci


Integrating into the kernel sources
-----------------------------------

It is also possible to patch Linux kernel sources to integrate MadWifi
directly into the kernel tree.  This allows building MadWifi as part of
the kernel.  This could be useful for embedded systems that don't
support loadable modules.  Please refer to patch-kernel/README for
details.


Further information
-------------------

Further information on how to work with the driver can be found in the
file README.  In addition, the project's wiki has a lot of valuable
information:

http://madwifi.org/