Go to file
mint 34584d97ea
Merge pull request #86 from qookei/trunk
Multiboot 1 improvements
2021-06-30 21:35:53 +02:00
.github limine-install: Add local .gitignore 2021-05-28 15:57:34 +02:00
decompressor build: which -> command -v 2021-06-30 18:22:50 +02:00
limine-install build: Do not fail install if limine-eltorito-efi.bin is not present 2021-06-30 18:27:46 +02:00
scripts build: Bump GCC to 11.1.0, misc fixes 2021-05-04 13:56:00 +02:00
stage1 bootsect: Also handle if boot drive is above 0x8f and gracefully fail if that's the case 2021-05-23 04:15:36 +02:00
stage23 multiboot1: account for memory that crosses 1MB when summing up sizes 2021-06-30 20:59:59 +02:00
test term: Add support for tabs 2021-05-22 23:11:18 +02:00
tinf build: Generally rework build system to easily allow 3rd party toolchains to be used. Drop reliance on libgcc for BIOS builds by shipping our own routines instead 2021-04-03 00:48:38 +02:00
.gitignore limine-install: Add local .gitignore 2021-05-28 15:57:34 +02:00
bochsrc vbe: Fix bug where the vbe tty double buffer did not properly refresh 2020-12-27 19:32:18 +01:00
CONFIG.md CONFIG, README: document support for Multiboot 1 2021-06-29 16:58:19 +02:00
LICENSE.md misc: Update copyright year 2021-01-01 13:36:09 +01:00
Makefile build: Do not fail install if limine-eltorito-efi.bin is not present 2021-06-30 18:27:46 +02:00
README.md build: which -> command -v 2021-06-30 18:22:50 +02:00
screenshot.png misc: Update screenshot 2021-01-01 13:57:54 +01:00

Limine

What is Limine?

Limine is an advanced x86/x86_64 BIOS/UEFI Bootloader which supports modern PC features such as Long Mode, 5-level paging, and SMP (multicore), to name a few.

Support Limine

Like Limine and want to support it? Donate Bitcoin to bc1q00d59y75crpapw7qp8sea5j5sx6l4k2ssjylf9 :)

Limine's boot menu

Reference screenshot

Photo by Nishant Aneja from Pexels

Supported boot protocols

  • Linux
  • stivale and stivale2 (Limine's native boot protocols, see their specifications for details)
  • Chainloading
  • Multiboot 1

Supported filesystems

  • ext2/3/4
  • echfs
  • FAT12/16/32
  • ISO9660 (CDs/DVDs)

Supported partitioning schemes

  • MBR
  • GPT
  • Unpartitioned media

Binary releases

For convenience, for point releases, binaries are distributed. These binaries are shipped in the -binary branches and tags of this repository (see branches and tags).

For example, to clone the latest binary release of the v2.x branch one can do

git clone https://github.com/limine-bootloader/limine.git --branch=v2.0-branch-binary --depth=1

or, to clone a specific binary point release (for example v2.4)

git clone https://github.com/limine-bootloader/limine.git --branch=v2.4-binary --depth=1

Additionally, the absolute latest Limine binary release can be obtained by fetching the latest-binary branch:

git clone https://github.com/limine-bootloader/limine.git --branch=latest-binary --depth=1

limine-install binaries are provided for Linux and Windows. In case one wants to rebuild limine-install, simply use make in the binary release.

Building the bootloader

These steps are not necessary if cloning a binary release. If so, skip to "Installing Limine binaries".

Note that the build system does not support building from a directory whose full path contains spaces.

Building the toolchain

This step can take a long time, but it will ensure that the compiler will work with Limine. If on an x86_64 host, with GCC or Clang installed, you can also skip to the next paragraph.

The toolchain building process depends on the following packages: bash, make, wget, gcc, g++, GNU binutils.

Building the toolchain can be accomplished by running:

make toolchain

The above step may take a while

Building Limine

In order to build Limine, the following packages have to be installed: bash, make, git, nasm, mtools (optional, necessary to build limine-eltorito-efi.bin). Furthermore, either the toolchain must have been built in the previous paragraph, or gcc or llvm/clang must also be installed. GNU binutils is necessary in order to build the UEFI port of Limine. A full LLVM toolchain without GNU binutils can be used to build the BIOS port instead.

Both the UEFI and BIOS ports of the bootloader can be built, using GCC/GNU binutils, with:

make

It is possible to pass make additional flags, most relevantly, TOOLCHAIN= which allows one to specify an alternative toolchain for the build system to use (the default is x86_64-elf, falling back to no-triple, or host, toolchain).

The generated bootloader files are going to be in bin.

Using clang/LLVM

In order to build the BIOS port fully using clang/LLVM, run make as such:

make limine-bios bin/limine-install CC="clang" TOOLCHAIN="llvm" TOOLCHAIN_CC="clang" TOOLCHAIN_LD="ld.lld"

And in order to build the UEFI port using clang/LLVM + GNU binutils, run make as such:

make limine-uefi TOOLCHAIN="llvm" TOOLCHAIN_CC="clang" TOOLCHAIN_LD="ld" TOOLCHAIN_OBJCOPY="objcopy"

Installing Limine binaries

This step is optional as the bootloader binaries can be used from the bin or release directory just fine. This step will only install them in a share and bin directories in the specified PREFIX (default is /usr/local).

Use make install to install Limine binaries, optionally specifying a prefix with a PREFIX=... option.

How to use

UEFI

The BOOTX64.EFI file is a vaild EFI application that can be simply copied to the /EFI/BOOT directory of a FAT formatted EFI system partition. This file can be installed there and coexist with a BIOS installation of Limine (see below) so that the disk will be bootable by both BIOS and UEFI.

The boot device must to contain the limine.cfg file in either the root or the boot directory of one of the partitions, formatted with a supported file system (the ESP partition is recommended).

BIOS/MBR

In order to install Limine on a MBR device (which can just be a raw image file), run limine-install as such:

limine-install <path to device/image>

The boot device must to contain the limine.sys and limine.cfg files in either the root or the boot directory of one of the partitions, formatted with a supported file system.

BIOS/GPT

If using a GPT formatted device, there are 2 options one can follow for installation:

  • Specifying a dedicated stage 2 partition.
  • Letting limine-install attempt to embed stage 2 within GPT structures.

In case one wants to specify a stage 2 partition, create a partition on the GPT device of at least 32KiB in size, and pass the 1-based number of the partition to limine-install as a second argument; such as:

limine-install <path to device/image> <1-based stage 2 partition number>

In case one wants to let limine-install embed stage 2 within GPT's structures, simply omit the partition number, and invoke limine-install the same as one would do for an MBR partitioned device.

The boot device must to contain the limine.sys and limine.cfg files in either the root or the boot directory of one of the partitions, formatted with a supported file system.

BIOS/UEFI hybrid ISO creation

In order to create a hybrid ISO with Limine, place the limine-eltorito-efi.bin, limine-cd.bin, limine.sys, and limine.cfg files into a directory which will serve as the root of the created ISO. (limine.sys and limine.cfg must either be in the root or inside a boot subdirectory; limine-eltorito-efi.bin and limine-cd.bin can reside anywhere).

Place any other file you want to be on the final ISO in said directory, then run:

xorriso -as mkisofs -b <relative path of limine-cd.bin> \
        -no-emul-boot -boot-load-size 4 -boot-info-table \
        --efi-boot <relative path of limine-eltorito-efi.bin> \
        -efi-boot-part --efi-boot-image --protective-msdos-label \
        <root directory> -o image.iso

Note: xorriso is required.

And do not forget to also run limine-install on the generated image:

limine-install image.iso

<relative path of limine-cd.bin> is the relative path of limine-cd.bin inside the root directory. For example, if it was copied in <root directory>/boot/limine-cd.bin, it would be boot/limine-cd.bin.

<relative path of limine-eltorito-efi.bin> is the relative path of limine-eltorito-efi.bin inside the root directory. For example, if it was copied in <root directory>/boot/limine-eltorito-efi.bin, it would be boot/limine-eltorito-efi.bin.

BIOS/PXE boot

The limine-pxe.bin binary is a valid PXE boot image. In order to boot Limine from PXE it is necessary to setup a DHCP server with support for PXE booting. This can either be accomplished using a single DHCP server or your existing DHCP server and a proxy DHCP server such as dnsmasq.

limine.cfg and limine.sys are expected to be on the server used for boot.

Configuration

The limine.cfg file contains Limine's configuration.

An example limine.cfg file can be found in test/limine.cfg.

More info on the format of limine.cfg can be found in CONFIG.md.

Acknowledgments

Limine uses a stripped-down version of tinf.

Discord server

We have a Discord server if you need support, info, or you just want to hang out with us.