333 lines
12 KiB
Plaintext
333 lines
12 KiB
Plaintext
-------------------------------------------------------------------------------
|
|
libserialport: cross-platform library for accessing serial ports
|
|
-------------------------------------------------------------------------------
|
|
|
|
libserialport is a minimal library written in C that is intended to take care
|
|
of the OS-specific details when writing software that uses serial ports.
|
|
|
|
By writing your serial code to use libserialport, you enable it to work
|
|
transparently on any platform supported by the library.
|
|
|
|
The operations that are supported are:
|
|
|
|
- Port enumeration (obtaining a list of serial ports on the system).
|
|
- Opening and closing ports.
|
|
- Setting port parameters (baud rate, parity, etc).
|
|
- Reading, writing and flushing data.
|
|
- Obtaining error information.
|
|
|
|
libserialport is an open source project released under the LGPL3+ license.
|
|
|
|
Status
|
|
======
|
|
|
|
The library should build and work on any Windows or Unix-based system. If it
|
|
does not, please submit a bug.
|
|
|
|
Enumeration is currently only implemented on Windows, Mac OS X and Linux. On
|
|
other systems enumeration will return no results, but ports can still be opened
|
|
by name and then used.
|
|
|
|
If you know how to enumerate available ports on another OS, please submit a bug
|
|
with this information, or better still a patch implementing it.
|
|
|
|
Future
|
|
======
|
|
|
|
Future versions will add additional API calls for obtaining metadata about a
|
|
port, e.g. for USB devices the USB VID and PID of the underlying device.
|
|
|
|
Dependencies
|
|
============
|
|
|
|
On Linux, libudev is required. On other systems no other libraries are required.
|
|
|
|
The libudev dependency could be eliminated in favour of direct sysfs queries at
|
|
the cost of some brevity. This is not currently a priority but if you feel like
|
|
doing this feel free to submit a patch.
|
|
|
|
Building
|
|
========
|
|
|
|
The package uses a GNU style build system and requires a Unix style shell.
|
|
On Windows it can be built with the MinGW toolchain and MSYS environment.
|
|
|
|
Run "./autogen.sh" to generate the build system, "./configure" to setup, then
|
|
"make" to build the library and "make install" to install it.
|
|
|
|
API
|
|
===
|
|
|
|
The API is simple, and designed to be a minimal wrapper around the serial port
|
|
support in each OS.
|
|
|
|
Most functions take a pointer to a struct sp_port, which represents a serial
|
|
port. These structures are always allocated and freed by the library, using the
|
|
functions in the 'Enumeration' section below.
|
|
|
|
All functions can return only three possible error values. SP_ERR_ARG indicates
|
|
the function was called with invalid arguments. SP_ERR_FAIL indicates that the
|
|
OS reported a failure. SP_ERR_MEM indicates that a memory allocation failed.
|
|
All of these error values are negative.
|
|
|
|
When SP_ERR_FAIL is returned, an error code or string description of the error
|
|
can be obtained by calling sp_last_error_code() or sp_last_error_message(). The
|
|
error code or message is that provided by the OS; libserialport does not define
|
|
any error codes or messages of its own.
|
|
|
|
Function calls that succeed return SP_OK, which is equal to zero, or where
|
|
otherwise documented a positive value.
|
|
|
|
The available functions are as follows:
|
|
|
|
Enumeration
|
|
-----------
|
|
|
|
int sp_get_port_by_name(const char *portname, struct sp_port **port_ptr);
|
|
|
|
Obtains a pointer to a new sp_port structure representing the named port. The
|
|
user should allocate a variable of type "struct sp_port *" and pass a pointer
|
|
to this to receive the result.
|
|
|
|
The result should be freed after use by calling sp_free_port().
|
|
|
|
Returns: SP_OK on success, SP_ERR_FAIL on failure, SP_ERR_MEM on allocation
|
|
failure, or SP_ERR_ARG if an invalid pointer is passed. If any error
|
|
is returned, the variable pointed to by port_ptr will be set to NULL.
|
|
Otherwise, it will be set to point to the newly allocated port.
|
|
|
|
void sp_free_port(struct sp_port *port);
|
|
|
|
Frees a port structure obtained from sp_get_port_by_name().
|
|
|
|
int sp_list_ports(struct sp_port ***list_ptr);
|
|
|
|
Lists the serial ports available on the system. The result obtained is an
|
|
array of pointers to sp_port structures, terminated by a NULL. The user should
|
|
allocate a variable of type "struct sp_port **" and pass a pointer to this to
|
|
receive the result.
|
|
|
|
The result should be freed after use by calling sp_free_port_list(). If a port
|
|
from the list is to be used after freeing the list, it must be copied first
|
|
using sp_copy_port().
|
|
|
|
Returns: SP_OK on success, SP_ERR_FAIL on failure, SP_ERR_MEM on allocation
|
|
failure, or SP_ERR_ARG if an invalid pointer is passed. If any error
|
|
is returned, the variable pointed to by list_ptr will be set to NULL.
|
|
Otherwise, it will be set to point to the newly allocated array.
|
|
|
|
int sp_copy_port(const struct sp_port *port, struct sp_port **copy_ptr);
|
|
|
|
Makes a new copy of a sp_port structure. The user should allocate a variable
|
|
of type "struct sp_port *" and pass a pointer to this to receive the result.
|
|
|
|
The copy should be freed after use by calling sp_free_port().
|
|
|
|
Returns: SP_OK on success, SP_ERR_MEM on allocation failure, or SP_ERR_ARG
|
|
if an invalid port or pointer is passed. If any error is returned,
|
|
the variable pointed to by copy_ptr will be set to NULL. Otherwise,
|
|
it will be set to point to the newly allocated copy.
|
|
|
|
void sp_free_port_list(struct sp_port **list);
|
|
|
|
Frees a port list obtained from sp_list_ports(). This will also free all
|
|
the sp_port structures referred to from the list; any that are to be retained
|
|
must be copied first using sp_copy_port().
|
|
|
|
Opening and closing ports
|
|
-------------------------
|
|
|
|
int sp_open(struct sp_port *port, int flags);
|
|
|
|
Opens the specified serial port.
|
|
|
|
Parameters:
|
|
|
|
port: Pointer to port structure.
|
|
flags: Flags to use when opening the serial port. Possible
|
|
flags are: SP_MODE_RDWR, SP_MODE_RDONLY, and SP_MODE_NONBLOCK.
|
|
|
|
Returns: SP_OK on success, SP_ERR_FAIL on failure, SP_ERR_MEM on allocation
|
|
failure, or SP_ERR_ARG if an invalid port is passed.
|
|
|
|
int sp_close(struct sp_port *port);
|
|
|
|
Closes the specified serial port.
|
|
|
|
Returns: SP_OK on success, SP_ERR_FAIL on failure, or SP_ERR_ARG
|
|
if an invalid port is passed.
|
|
|
|
Setting port parameters
|
|
-----------------------
|
|
|
|
int sp_set_baudrate(struct sp_port *port, int baudrate)
|
|
|
|
Sets the baud rate for the specified serial port.
|
|
|
|
Parameters:
|
|
|
|
port: Pointer to port structure.
|
|
baud: Baud rate in bits per second.
|
|
|
|
Returns: SP_OK on success, SP_ERR_FAIL on failure, or SP_ERR_ARG
|
|
for invalid arguments.
|
|
|
|
int sp_set_bits(struct sp_port *port, int bits)
|
|
|
|
Sets the number of data bits for the specified serial port.
|
|
|
|
Parameters:
|
|
|
|
port: Pointer to port structure.
|
|
bits: Number of data bits to use. Valid values are 5 to 8.
|
|
|
|
Returns: SP_OK on success, SP_ERR_FAIL on failure, or SP_ERR_ARG
|
|
for invalid arguments.
|
|
|
|
int sp_set_parity(struct sp_port *port, int parity)
|
|
|
|
Sets the parity for the specified serial port.
|
|
|
|
Parameters:
|
|
|
|
port: Pointer to port structure.
|
|
parity: Parity setting to use.
|
|
(SP_PARITY_NONE, SP_PARITY_EVEN or SP_PARITY_ODD)
|
|
|
|
Returns: SP_OK on success, SP_ERR_FAIL on failure, or SP_ERR_ARG
|
|
for invalid arguments.
|
|
|
|
int sp_set_stopbits(struct sp_port *port, int stopbits)
|
|
|
|
Sets the number of stop bits for the specified port.
|
|
|
|
Parameters:
|
|
|
|
port: Pointer to port structure.
|
|
stopbits: Number of stop bits to use (1 or 2).
|
|
|
|
Returns: SP_OK on success, SP_ERR_FAIL on failure, or SP_ERR_ARG
|
|
for invalid arguments.
|
|
|
|
int sp_set_flowcontrol(struct sp_port *port, int flowcontrol)
|
|
|
|
Sets the flow control type for the specified serial port.
|
|
|
|
This function is a wrapper that sets the RTS, CTS, DTR, DSR and
|
|
XON/XOFF settings as necessary for the specified flow control
|
|
type. For more fine-grained control of these settings, use their
|
|
individual configuration functions or the sp_set_config() function.
|
|
|
|
Parameters:
|
|
|
|
port: Pointer to port structure.
|
|
flowcontrol: Flow control setting to use. Valid settings are:
|
|
|
|
SP_FLOWCONTROL_NONE: No flow control.
|
|
SP_FLOWCONTROL_XONXOFF: Software flow control using XON/XOFF characters.
|
|
SP_FLOWCONTROL_RTSCTS: Hardware flow control using RTS/CTS signals.
|
|
SP_FLOWCONTROL_DTRDSR: Hardware flow control using DTR/DSR signals.
|
|
|
|
Returns: SP_OK on success, SP_ERR_FAIL on failure, or SP_ERR_ARG
|
|
for invalid arguments.
|
|
|
|
int sp_set_config(struct sp_port *port, struct sp_port_config *config)
|
|
|
|
Sets all parameters for the specified serial port.
|
|
|
|
The user should populate a struct sp_port_config, then pass a pointer to it
|
|
as the config parameter.
|
|
|
|
The fields of sp_port_config are:
|
|
|
|
int baudrate: Baud rate in bits per second.
|
|
int bits: Number of data bits to use. Valid values are 5 to 8.
|
|
int parity: Parity setting to use.
|
|
(SP_PARITY_NONE, SP_PARITY_EVEN or SP_PARITY_ODD)
|
|
int stopbits: Number of stop bits to use (1 or 2).
|
|
int rts: RTS pin mode.
|
|
(SP_RTS_ON, SP_RTS_OFF or SP_RTS_FLOW_CONTROL)
|
|
int cts: CTS pin mode.
|
|
(SP_CTS_IGNORE or SP_CTS_FLOW_CONTROL)
|
|
int dtr: DTR pin mode.
|
|
(SP_DTR_ON, SP_DTR_OFF or SP_DTR_FLOW_CONTROL)
|
|
int dsr: DSR pin mode.
|
|
(SP_DSR_IGNORE or SP_DSR_FLOW_CONTROL)
|
|
int xon_xoff: XON/XOFF flow control mode.
|
|
(SP_XONXOFF_DISABLED, SP_XONXOFF_IN,
|
|
SP_XONXOFF_OUT or SP_XONXOFF_INOUT)
|
|
|
|
To retain the current value of any setting, set the field to to a
|
|
negative value.
|
|
|
|
Returns: SP_OK on success, SP_ERR_FAIL on failure, or SP_ERR_ARG
|
|
for invalid arguments.
|
|
|
|
Reading, writing and flushing data
|
|
----------------------------------
|
|
|
|
int sp_read(struct sp_port *port, const void *buf, size_t count)
|
|
|
|
Reads bytes from the specified serial port. Note that this function may
|
|
return after reading less than the specified number of bytes; it is the
|
|
user's responsibility to iterate as necessary in this case.
|
|
|
|
Parameters:
|
|
|
|
port: Pointer to port structure.
|
|
buf: Buffer in which to store the bytes read.
|
|
count: Maximum number of bytes to read.
|
|
|
|
Returns: The number of bytes read, SP_ERR_FAIL on failure,
|
|
or SP_ERR_ARG for invalid arguments.
|
|
|
|
int sp_write(struct sp_port *port, const void *buf, size_t count)
|
|
|
|
Write bytes to the specified serial port. Note that this function may
|
|
return after writing less than the specified number of bytes; it is the
|
|
user's responsibility to iterate as necessary in this case.
|
|
|
|
Parameters:
|
|
|
|
port: Pointer to port structure.
|
|
buf: Buffer containing the bytes to write.
|
|
count: Maximum number of bytes to write.
|
|
|
|
Returns: The number of bytes written, SP_ERR_FAIL on failure,
|
|
or SP_ERR_ARG for invalid arguments.
|
|
|
|
int sp_flush(struct sp_port *port);
|
|
|
|
Flushes serial port buffers.
|
|
|
|
Returns: SP_OK on success, SP_ERR_FAIL on failure, or SP_ERR_ARG
|
|
if an invalid port is passed.
|
|
|
|
Error handling
|
|
--------------
|
|
|
|
int sp_last_error_code();
|
|
|
|
Gets the error code for a failed operation.
|
|
|
|
In order to obtain the correct result, this function should be called
|
|
straight after the failure, before executing any other system operations.
|
|
|
|
Returns: The system's numeric code for the error that caused the last
|
|
operation to fail.
|
|
|
|
char *sp_last_error_message();
|
|
|
|
Gets the error message for failed operation.
|
|
|
|
In order to obtain the correct result, this function should be called
|
|
straight after the failure, before executing other system operations.
|
|
|
|
Returns: The system's message for the error that caused the last
|
|
operation to fail. This string may be allocated by the function,
|
|
and should be freed after use by calling sp_free_error_message.
|
|
|
|
void sp_free_error_message(char *message);
|
|
|
|
Frees the error message returned by sp_last_error_message().
|