libserialport/examples/port_config.c

175 lines
5.7 KiB
C

#include <libserialport.h>
#include <stdio.h>
#include <stdlib.h>
/* Example of how to configure a serial port.
*
* This example file is released to the public domain. */
/* Helper function for error handling. */
int check(enum sp_return result);
/* Helper function to give a name for each parity mode. */
const char *parity_name(enum sp_parity parity);
int main(int argc, char **argv)
{
/* Get the port name from the command line. */
if (argc != 2) {
printf("Usage: %s <port name>\n", argv[0]);
return -1;
}
char *port_name = argv[1];
/* A pointer to a struct sp_port, which will refer to
* the port found. */
struct sp_port *port;
printf("Looking for port %s.\n", port_name);
/* Call sp_get_port_by_name() to find the port. The port
* pointer will be updated to refer to the port found. */
check(sp_get_port_by_name(port_name, &port));
/* Display some basic information about the port. */
printf("Port name: %s\n", sp_get_port_name(port));
printf("Description: %s\n", sp_get_port_description(port));
/* The port must be open to access its configuration. */
printf("Opening port.\n");
check(sp_open(port, SP_MODE_READ_WRITE));
/* There are two ways to access a port's configuration:
*
* 1. You can read and write a whole configuration (all settings at
* once) using sp_get_config() and sp_set_config(). This is handy
* if you want to change between some preset combinations, or save
* and restore an existing configuration. It also ensures the
* changes are made together, via an efficient set of calls into
* the OS - in some cases a single system call can be used.
*
* Use accessor functions like sp_get_config_baudrate() and
* sp_set_config_baudrate() to get and set individual settings
* from a configuration.
*
* Configurations are allocated using sp_new_config() and freed
* with sp_free_config(). You need to manage them yourself.
*
* 2. As a shortcut, you can set individual settings on a port
* directly by calling functions like sp_set_baudrate() and
* sp_set_parity(). This saves you the work of allocating
* a temporary config, setting it up, applying it to a port
* and then freeing it.
*
* In this example we'll do a bit of both: apply some initial settings
* to the port, read out that config and display it, then switch to a
* different configuration and back using sp_set_config(). */
/* First let's set some initial settings directly on the port.
*
* You should always configure all settings before using a port.
* There are no "default" settings applied by libserialport.
* When you open a port it has the defaults from the OS or driver,
* or the settings left over by the last program to use it. */
printf("Setting port to 115200 8N1, no flow control.\n");
check(sp_set_baudrate(port, 115200));
check(sp_set_bits(port, 8));
check(sp_set_parity(port, SP_PARITY_NONE));
check(sp_set_stopbits(port, 1));
check(sp_set_flowcontrol(port, SP_FLOWCONTROL_NONE));
/* A pointer to a struct sp_port_config, which we'll use for the config
* read back from the port. The pointer will be set by sp_new_config(). */
struct sp_port_config *initial_config;
/* Allocate a configuration for us to read the port config into. */
check(sp_new_config(&initial_config));
/* Read the current config from the port into that configuration. */
check(sp_get_config(port, initial_config));
/* Display some of the settings read back from the port. */
int baudrate, bits, stopbits;
enum sp_parity parity;
check(sp_get_config_baudrate(initial_config, &baudrate));
check(sp_get_config_bits(initial_config, &bits));
check(sp_get_config_stopbits(initial_config, &stopbits));
check(sp_get_config_parity(initial_config, &parity));
printf("Baudrate: %d, data bits: %d, parity: %s, stop bits: %d\n",
baudrate, bits, parity_name(parity), stopbits);
/* Create a different configuration to have ready for use. */
printf("Creating new config for 9600 7E2, XON/XOFF flow control.\n");
struct sp_port_config *other_config;
check(sp_new_config(&other_config));
check(sp_set_config_baudrate(other_config, 9600));
check(sp_set_config_bits(other_config, 7));
check(sp_set_config_parity(other_config, SP_PARITY_EVEN));
check(sp_set_config_stopbits(other_config, 2));
check(sp_set_config_flowcontrol(other_config, SP_FLOWCONTROL_XONXOFF));
/* We can apply the new config to the port in one call. */
printf("Applying new configuration.\n");
check(sp_set_config(port, other_config));
/* And now switch back to our original config. */
printf("Setting port back to previous config.\n");
check(sp_set_config(port, initial_config));
/* Now clean up by closing the port and freeing structures. */
check(sp_close(port));
sp_free_port(port);
sp_free_config(initial_config);
sp_free_config(other_config);
return 0;
}
/* Helper function for error handling. */
int check(enum sp_return result)
{
/* For this example we'll just exit on any error by calling abort(). */
char *error_message;
switch (result) {
case SP_ERR_ARG:
printf("Error: Invalid argument.\n");
abort();
case SP_ERR_FAIL:
error_message = sp_last_error_message();
printf("Error: Failed: %s\n", error_message);
sp_free_error_message(error_message);
abort();
case SP_ERR_SUPP:
printf("Error: Not supported.\n");
abort();
case SP_ERR_MEM:
printf("Error: Couldn't allocate memory.\n");
abort();
case SP_OK:
default:
return result;
}
}
/* Helper function to give a name for each parity mode. */
const char *parity_name(enum sp_parity parity)
{
switch (parity) {
case SP_PARITY_INVALID:
return "(Invalid)";
case SP_PARITY_NONE:
return "None";
case SP_PARITY_ODD:
return "Odd";
case SP_PARITY_EVEN:
return "Even";
case SP_PARITY_MARK:
return "Mark";
case SP_PARITY_SPACE:
return "Space";
default:
return NULL;
}
}