PCI Root Bridge I/O protocol is used by PCI Bus Driver to perform
PCI Memory, PCI I/O, and PCI Configuration cycles on a
PCI Root Bridge. It also provides services to perform different
types of bus mastering DMA.
V2 - Scratch that - there already exists an efipciio.h with most
of these definitions. Let me remove this patch and propose a new
one that will amend what's already there.
OK, here's a better version that adds the required definition in
efipciio.h. Note that EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL and
EFI_PCI_IO_PROTOCOL are two different protocols.
V3 - Pete, There are now two defines of EFI_PCI_ADDRESS.
Please repost with your define removed.
Nigel, Sorry about that. Here's v3.
Signed-off-by: Pete Batard <pete@akeo.ie>
Signed-off-by: Nigel Croxon <nigel.croxon@hpe.com>
This patch adds a few more items to facilitate porting
from EDK to gnu-efi.
It also adds updated PE machine types and fixes a discrepancy
for EVT_EFI_SIGNAL_MAX.
Signed-off-by: Pete Batard <pete@akeo.ie>
Signed-off-by: Nigel Croxon <nigel.croxon@hpe.com>
This patch introduces the use of the EDK2 names for the global GUID
variables, to allow for easier code conversion between EDK2 and
gnu-efi. All the existing GUID global variables have also been
aliased for backwards compatibility.
The patch also completes some of the earlier work with regards to
protocol struct definitions to also match the EDK2, with the
following caveat:
Because some of gnu-efi GUID macro definitions were declared with
the name that the EDK2 uses for the protocol struct itself, we have
to immediately deprecate the following GUID data aliases:
EFI_NETWORK_INTERFACE_IDENTIFIER_PROTOCOL
EFI_SIMPLE_NETWORK_PROTOCOL
EFI_PCI_IO_PROTOCOL
EFI_PXE_BASE_CODE_CALLBACK_PROTOCOL
This means that existing code using one of the above will break
on compilation. To mitigate this, explicit warnings have been
placed at the location where a developer will look for breakage,
detailing how they should amend their code.
The KnownGuids short labels in guid.c were also updated/amended
in a manner that should be a bit more consistent (though I have
no idea what the EDK2 does here, since I haven't looked at the
actual EDK2 source).
Finally, besides clean up (typo, whitespaces, duplicate removal),
we introduce the _GNU_EFI macro, in efi.h, to allow for conditional
selection of specific gnu-efi API calls, in code that may be
compiled with either EDK2 or gnu-efi.
Signed-off-by: Pete Batard <pete@akeo.ie>
Signed-off-by: Nigel Croxon <nigel.croxon@hpe.com>
and completes the renaming of structs, defines, and typedefs to match
the naming convention from the latest UEFI specifications.
This should make it easier for people to switch between EDK2 and
gnu-efi compilation.
The original names are #defined or typedef'd to the new names for
backwards compatibility. Also some whitespace cleanup was applied.
Note 1: From what I could see of the EDK API documentation,
structs are being aliased to their old names using typedef rather
than #define, so that's what I used. I altered some of the #define
from 8118d0 accordingly
Note 2: I also think it might be more helpful for users to keep
the backwards compatibility defs close to their declaration
(e.g. old GUID def right after current GUID declaration), rather
than in a separate section as was done in 8118d0, so that's what
I did in this patch.
Signed-off-by: Pete Batard <pbatard@users.sf.net>
Signed-off-by: Nigel Croxon <nigel.croxon@hpe.com>
64 bit entry point structure has a different GUID
from the existing 32 bit version.
Signed-off-by: Jianxun Zhang <jianxun.zhang@linux.intel.com>
Signed-off-by: Nigel Croxon <nigel.croxon@hpe.com>
EFI_EDID_ACTIVE_PROTOCOL
EFI_EDID_DISCOVERED_PROTOCOL
EFI_EDID_OVERRIDE_PROTOCOL
It also adds the matching global variables to libefi.
Signed-off-by: Nathan Blythe <nblythe@lgsinnovations.com>
Signed-off-by: Nigel Croxon <nigel.croxon@hpe.com>
point and as far as I can tell it agrees with the UEFI spec.
The attached patch removes -mno-mmx and -mno-sse for x86_64 and adds
a new Print target, "%f", to print float and double types.
It seems to compile for ia32, although I'm not sure why - shouldn't
it be throwing errors because the new function FloatToStr() in print.c
accepts a float, yet I left -no-sse for ARCH=ia32? A better solution
might be to add -msoft-float for targets where the floating point
calling convention doesn't match the UEFI spec. As I'm not familiar
with UEFI on ia32, I didn't make any changes to it.
Signed-off-by: Nathan Blythe <nblythe@lgsinnovations.com>
Signed-off-by: Nigel Croxon <nigel.croxon@hpe.com>
This patch renames a number of structs, defines, and typedefs to match
the naming convention in the UEFI specification. For example, it renames
DRIVER_BINDING_PROTOCOL (preprocessor GUID define) to
EFI_DRIVER_BINDING_PROTOCOL_GUID, and renames EFI_DRIVER_BINDING (protocol
interface) to EFI_DRIVER_BINDING_PROTOCOL.
The original names are all #defined to the new names for backwards
compatibility, so nothing should be broken.
Included in this patch are renames for all the types/defines for the
following protocols:
EFI_DRIVER_BINDING_PROTOCOL
EFI_COMPONENT_NAME_PROTOCOL
EFI_COMPONENT_NAME2_PROTOCOL
EFI_LOADED_IMAGE_PROTOCOL
If you accept this patch I'll work on adjusting all the other protocols
to match the spec as well, as time allows. Moving to the spec's naming
convention makes the code clearer and improves portability with EDK2.
Signed-off-by: Nathan Blythe <nblythe@lgsinnovations.com>
Signed-off-by: Nigel Croxon <nigel.croxon@hpe.com>
EFI_GUID instances) for EFI_PLATFORM_DRIVER_OVERRIDE_PROTOCOL,
EFI_DRIVER_FAMILY_OVERRIDE_PROTOCOL, and
EFI_BUS_SPECIFIC_DRIVER_OVERRIDE_PROTOCOL, used in the driver
binding search procedure to select which driver to connect when
multiple drivers' Supported() functions indicate support for
the same controller.
Signed-off-by: Nathan Blythe <nblythe@lgsinnovations.com>
Signed-off-by: Nigel Croxon <nigel.croxon@hpe.com>
the MSVC ARM linker, to specify the entry point, as is already the case
for ia32 and x86_64.
Required to enable the compilation of ARM drivers with MSVC, without
having to manually specify the entry point.
Signed-off-by: Pete Batard <pbatard@users.sf.net>
Signed-off-by: Nigel Croxon <nigel.croxon@hpe.com>
that MSVC compilers will complain about (such as Visual Studio
2015 with ARM target).
Signed-off-by: Pete Batard <pbatard@users.sf.net>
Signed-off-by: Nigel Croxon <nigel.croxon@hpe.com>
specific __attribute__((__unused__)), which breaks MSVC compilation...
I'll use this as a reminder that gnu-efi is compiled with more than
GNU toolchains, and that contributors might want to be careful about
adding GNU-specific extensions...
This patch does the following:
Create a new eficompiler.h header that sets all compiler-specific
options and extensions
Create a new EFI_UNUSED macro to be used in lieu of
__attribute__((__unused__)) and applies it to the relevant sources
Move the ALIGN(x) macro, previously defined in efisetjmp.h to the new header
Oh, and it also fixes a bunch of trailing whitespaces (because my code
editor is set to do just that by default).
Signed-off-by: Pete Batard <pbatard@users.sf.net>
Signed-off-by: Nigel Croxon <nigel.croxon@hpe.com>
Subject: [PATCH v2] ARM/AARCH64: define C99 types explicitly when building against
older standard
This adds support for the C99 uintXX_t types when building for
older versions of the standard, like the other architectures
already implement.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Nigel Croxon <nigel.croxon@hpe.com>
Subject: [PATCH 2/2] Replace ARM arithmetic support routines
with EDK2 versions.
Replace the incomplete GPL licensed ARM arithmetic support routines
with the ones from the EDK2 project. These cover long long multiplication
and long long logical shift as well.
Also remove the special case for small dividends in DivU64x32: we can
simply let the compiler handle this, and emit calls to the support
routines where appropriate.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Nigel Croxon <nigel.croxon@hpe.com>
Subject: [PATCH] Fix MSVC breakage due to GNU align extensions in setjmp
* __attribute__((__aligned__(x))), which is used in setjmp, is GNU only => use a macro instead
Signed-off-by: Pete Batard <pete@akeo.ie>
Signed-off-by: Nigel Croxon <nigel.croxon@hpe.com>
Date: Wed, 16 Sep 2015 18:26:28 +0100
Subject: [PATCH] Fix VS2015 warnings
* Currently, Visual Studio 2015 generates a lot of warnings such as:
gnu-efi\inc\efipciio.h(7): warning C4091: 'typedef ': ignored on left of '_EFI_PCI_IO' when no variable is declared
* To address this, gnu-efi should define the INTERFACE_DECL() for MS compilers as it does for GNU
Signed-off-by: Pete Batard <pete@akeo.ie>
Signed-off-by: Nigel Croxon <nigel.croxon@hpe.com>
Date: Mon, 17 Aug 2015 17:00:11 +0800
Subject: [PATCH] Add URI Device Path
Add the definition of URI Device Path according to UEFI 2.4c.
Signed-off-by: Gary Ching-Pang Lin <chingpang@gmail.com>
Signed-off-by: Nigel Croxon <nigel.croxon@hpe.com>
users, and it seems to make more sense to put it here than in
the application.
All of these are derived from the Tiano code, but I re-wrote the
x86_64 one because we use the ELF psABI calling conventions instead
of the MS ABI calling conventions. Which is to say you probably
shouldn't setjmp()/longjmp() between functions with EFIAPI (aka
__attribute__((ms_abi))) and those without.
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Nigel Croxon <nigel.croxon@hp.com>
This patch enables building gnu-efi outside of the source tree.
That in turn enables building for multiple architectures in parallel.
The build directory is controlled by the OBJDIR make variable. It
defaults to the value of ARCH, and can be overridden from the command
line.
This patch also cleans up some doubled slashes between INSTALLROOT
and PREFIX.
Signed-off-by: Jonathan Boeing <jonathan.n.boeing@gmail.com>
Signed-off-by: Nigel Croxon <nigel.croxon@hp.com>
Date: Wed, 10 Dec 2014 21:08:34 +0000
Subject: [PATCH] fixes for MSVC compilation
These fixes are needed to address the following error and warnings when compiling the library part
using Visual Studio 2013 Community Edition (as in https://github.com/pbatard/uefi-simple):
* "lib\x86_64\math.c(49): error C4235: nonstandard extension used : '_asm' keyword not supported
on this architecture"
* "lib\print.c(98): error C2059: syntax error : '('" due to placement of EFIAPI macro
* "lib\cmdline.c(94): warning C4090: 'function' : different 'const' qualifiers"
* "lib\smbios.c(25): warning C4068: unknown pragma"
* Also update macro definitions in "inc\<arch>\efibind.h" for MSVC
Signed-off-by: Pete Batard <pete@akeo.ie>
Signed-off-by: Nigel Croxon <nigel.croxon@hp.com>
