gnu-efi/inc/efiser.h

137 lines
3.5 KiB
C
Raw Normal View History

2013-01-31 01:25:25 +04:00
#ifndef _EFI_SER_H
#define _EFI_SER_H
/*++
Copyright (c) 1998 Intel Corporation
Module Name:
efiser.h
Abstract:
EFI serial protocol
Revision History
--*/
//
// Serial protocol
//
Update global protocol GUIDs definitions to match EDK2 This patch introduces the use of the EDK2 names for the global GUID variables, to allow for easier code conversion between EDK2 and gnu-efi. All the existing GUID global variables have also been aliased for backwards compatibility. The patch also completes some of the earlier work with regards to protocol struct definitions to also match the EDK2, with the following caveat: Because some of gnu-efi GUID macro definitions were declared with the name that the EDK2 uses for the protocol struct itself, we have to immediately deprecate the following GUID data aliases: EFI_NETWORK_INTERFACE_IDENTIFIER_PROTOCOL EFI_SIMPLE_NETWORK_PROTOCOL EFI_PCI_IO_PROTOCOL EFI_PXE_BASE_CODE_CALLBACK_PROTOCOL This means that existing code using one of the above will break on compilation. To mitigate this, explicit warnings have been placed at the location where a developer will look for breakage, detailing how they should amend their code. The KnownGuids short labels in guid.c were also updated/amended in a manner that should be a bit more consistent (though I have no idea what the EDK2 does here, since I haven't looked at the actual EDK2 source). Finally, besides clean up (typo, whitespaces, duplicate removal), we introduce the _GNU_EFI macro, in efi.h, to allow for conditional selection of specific gnu-efi API calls, in code that may be compiled with either EDK2 or gnu-efi. Signed-off-by: Pete Batard <pete@akeo.ie> Signed-off-by: Nigel Croxon <nigel.croxon@hpe.com>
2016-08-18 15:42:11 +03:00
#define EFI_SERIAL_IO_PROTOCOL_GUID \
2013-01-31 01:25:25 +04:00
{ 0xBB25CF6F, 0xF1D4, 0x11D2, {0x9A, 0x0C, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0xFD} }
Update global protocol GUIDs definitions to match EDK2 This patch introduces the use of the EDK2 names for the global GUID variables, to allow for easier code conversion between EDK2 and gnu-efi. All the existing GUID global variables have also been aliased for backwards compatibility. The patch also completes some of the earlier work with regards to protocol struct definitions to also match the EDK2, with the following caveat: Because some of gnu-efi GUID macro definitions were declared with the name that the EDK2 uses for the protocol struct itself, we have to immediately deprecate the following GUID data aliases: EFI_NETWORK_INTERFACE_IDENTIFIER_PROTOCOL EFI_SIMPLE_NETWORK_PROTOCOL EFI_PCI_IO_PROTOCOL EFI_PXE_BASE_CODE_CALLBACK_PROTOCOL This means that existing code using one of the above will break on compilation. To mitigate this, explicit warnings have been placed at the location where a developer will look for breakage, detailing how they should amend their code. The KnownGuids short labels in guid.c were also updated/amended in a manner that should be a bit more consistent (though I have no idea what the EDK2 does here, since I haven't looked at the actual EDK2 source). Finally, besides clean up (typo, whitespaces, duplicate removal), we introduce the _GNU_EFI macro, in efi.h, to allow for conditional selection of specific gnu-efi API calls, in code that may be compiled with either EDK2 or gnu-efi. Signed-off-by: Pete Batard <pete@akeo.ie> Signed-off-by: Nigel Croxon <nigel.croxon@hpe.com>
2016-08-18 15:42:11 +03:00
#define SERIAL_IO_PROTOCOL EFI_SERIAL_IO_PROTOCOL_GUID
2013-01-31 01:25:25 +04:00
Update global protocol GUIDs definitions to match EDK2 This patch introduces the use of the EDK2 names for the global GUID variables, to allow for easier code conversion between EDK2 and gnu-efi. All the existing GUID global variables have also been aliased for backwards compatibility. The patch also completes some of the earlier work with regards to protocol struct definitions to also match the EDK2, with the following caveat: Because some of gnu-efi GUID macro definitions were declared with the name that the EDK2 uses for the protocol struct itself, we have to immediately deprecate the following GUID data aliases: EFI_NETWORK_INTERFACE_IDENTIFIER_PROTOCOL EFI_SIMPLE_NETWORK_PROTOCOL EFI_PCI_IO_PROTOCOL EFI_PXE_BASE_CODE_CALLBACK_PROTOCOL This means that existing code using one of the above will break on compilation. To mitigate this, explicit warnings have been placed at the location where a developer will look for breakage, detailing how they should amend their code. The KnownGuids short labels in guid.c were also updated/amended in a manner that should be a bit more consistent (though I have no idea what the EDK2 does here, since I haven't looked at the actual EDK2 source). Finally, besides clean up (typo, whitespaces, duplicate removal), we introduce the _GNU_EFI macro, in efi.h, to allow for conditional selection of specific gnu-efi API calls, in code that may be compiled with either EDK2 or gnu-efi. Signed-off-by: Pete Batard <pete@akeo.ie> Signed-off-by: Nigel Croxon <nigel.croxon@hpe.com>
2016-08-18 15:42:11 +03:00
INTERFACE_DECL(_EFI_SERIAL_IO_PROTOCOL);
2013-01-31 01:25:25 +04:00
typedef enum {
Update global protocol GUIDs definitions to match EDK2 This patch introduces the use of the EDK2 names for the global GUID variables, to allow for easier code conversion between EDK2 and gnu-efi. All the existing GUID global variables have also been aliased for backwards compatibility. The patch also completes some of the earlier work with regards to protocol struct definitions to also match the EDK2, with the following caveat: Because some of gnu-efi GUID macro definitions were declared with the name that the EDK2 uses for the protocol struct itself, we have to immediately deprecate the following GUID data aliases: EFI_NETWORK_INTERFACE_IDENTIFIER_PROTOCOL EFI_SIMPLE_NETWORK_PROTOCOL EFI_PCI_IO_PROTOCOL EFI_PXE_BASE_CODE_CALLBACK_PROTOCOL This means that existing code using one of the above will break on compilation. To mitigate this, explicit warnings have been placed at the location where a developer will look for breakage, detailing how they should amend their code. The KnownGuids short labels in guid.c were also updated/amended in a manner that should be a bit more consistent (though I have no idea what the EDK2 does here, since I haven't looked at the actual EDK2 source). Finally, besides clean up (typo, whitespaces, duplicate removal), we introduce the _GNU_EFI macro, in efi.h, to allow for conditional selection of specific gnu-efi API calls, in code that may be compiled with either EDK2 or gnu-efi. Signed-off-by: Pete Batard <pete@akeo.ie> Signed-off-by: Nigel Croxon <nigel.croxon@hpe.com>
2016-08-18 15:42:11 +03:00
DefaultParity,
NoParity,
2013-01-31 01:25:25 +04:00
EvenParity,
OddParity,
MarkParity,
SpaceParity
} EFI_PARITY_TYPE;
typedef enum {
Update global protocol GUIDs definitions to match EDK2 This patch introduces the use of the EDK2 names for the global GUID variables, to allow for easier code conversion between EDK2 and gnu-efi. All the existing GUID global variables have also been aliased for backwards compatibility. The patch also completes some of the earlier work with regards to protocol struct definitions to also match the EDK2, with the following caveat: Because some of gnu-efi GUID macro definitions were declared with the name that the EDK2 uses for the protocol struct itself, we have to immediately deprecate the following GUID data aliases: EFI_NETWORK_INTERFACE_IDENTIFIER_PROTOCOL EFI_SIMPLE_NETWORK_PROTOCOL EFI_PCI_IO_PROTOCOL EFI_PXE_BASE_CODE_CALLBACK_PROTOCOL This means that existing code using one of the above will break on compilation. To mitigate this, explicit warnings have been placed at the location where a developer will look for breakage, detailing how they should amend their code. The KnownGuids short labels in guid.c were also updated/amended in a manner that should be a bit more consistent (though I have no idea what the EDK2 does here, since I haven't looked at the actual EDK2 source). Finally, besides clean up (typo, whitespaces, duplicate removal), we introduce the _GNU_EFI macro, in efi.h, to allow for conditional selection of specific gnu-efi API calls, in code that may be compiled with either EDK2 or gnu-efi. Signed-off-by: Pete Batard <pete@akeo.ie> Signed-off-by: Nigel Croxon <nigel.croxon@hpe.com>
2016-08-18 15:42:11 +03:00
DefaultStopBits,
2013-01-31 01:25:25 +04:00
OneStopBit, // 1 stop bit
OneFiveStopBits, // 1.5 stop bits
TwoStopBits // 2 stop bits
} EFI_STOP_BITS_TYPE;
#define EFI_SERIAL_CLEAR_TO_SEND 0x0010 // RO
#define EFI_SERIAL_DATA_SET_READY 0x0020 // RO
#define EFI_SERIAL_RING_INDICATE 0x0040 // RO
#define EFI_SERIAL_CARRIER_DETECT 0x0080 // RO
#define EFI_SERIAL_REQUEST_TO_SEND 0x0002 // WO
#define EFI_SERIAL_DATA_TERMINAL_READY 0x0001 // WO
#define EFI_SERIAL_INPUT_BUFFER_EMPTY 0x0100 // RO
#define EFI_SERIAL_OUTPUT_BUFFER_EMPTY 0x0200 // RO
#define EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE 0x1000 // RW
#define EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE 0x2000 // RW
#define EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE 0x4000 // RW
typedef
EFI_STATUS
(EFIAPI *EFI_SERIAL_RESET) (
Update global protocol GUIDs definitions to match EDK2 This patch introduces the use of the EDK2 names for the global GUID variables, to allow for easier code conversion between EDK2 and gnu-efi. All the existing GUID global variables have also been aliased for backwards compatibility. The patch also completes some of the earlier work with regards to protocol struct definitions to also match the EDK2, with the following caveat: Because some of gnu-efi GUID macro definitions were declared with the name that the EDK2 uses for the protocol struct itself, we have to immediately deprecate the following GUID data aliases: EFI_NETWORK_INTERFACE_IDENTIFIER_PROTOCOL EFI_SIMPLE_NETWORK_PROTOCOL EFI_PCI_IO_PROTOCOL EFI_PXE_BASE_CODE_CALLBACK_PROTOCOL This means that existing code using one of the above will break on compilation. To mitigate this, explicit warnings have been placed at the location where a developer will look for breakage, detailing how they should amend their code. The KnownGuids short labels in guid.c were also updated/amended in a manner that should be a bit more consistent (though I have no idea what the EDK2 does here, since I haven't looked at the actual EDK2 source). Finally, besides clean up (typo, whitespaces, duplicate removal), we introduce the _GNU_EFI macro, in efi.h, to allow for conditional selection of specific gnu-efi API calls, in code that may be compiled with either EDK2 or gnu-efi. Signed-off-by: Pete Batard <pete@akeo.ie> Signed-off-by: Nigel Croxon <nigel.croxon@hpe.com>
2016-08-18 15:42:11 +03:00
IN struct _EFI_SERIAL_IO_PROTOCOL *This
2013-01-31 01:25:25 +04:00
);
typedef
EFI_STATUS
(EFIAPI *EFI_SERIAL_SET_ATTRIBUTES) (
Update global protocol GUIDs definitions to match EDK2 This patch introduces the use of the EDK2 names for the global GUID variables, to allow for easier code conversion between EDK2 and gnu-efi. All the existing GUID global variables have also been aliased for backwards compatibility. The patch also completes some of the earlier work with regards to protocol struct definitions to also match the EDK2, with the following caveat: Because some of gnu-efi GUID macro definitions were declared with the name that the EDK2 uses for the protocol struct itself, we have to immediately deprecate the following GUID data aliases: EFI_NETWORK_INTERFACE_IDENTIFIER_PROTOCOL EFI_SIMPLE_NETWORK_PROTOCOL EFI_PCI_IO_PROTOCOL EFI_PXE_BASE_CODE_CALLBACK_PROTOCOL This means that existing code using one of the above will break on compilation. To mitigate this, explicit warnings have been placed at the location where a developer will look for breakage, detailing how they should amend their code. The KnownGuids short labels in guid.c were also updated/amended in a manner that should be a bit more consistent (though I have no idea what the EDK2 does here, since I haven't looked at the actual EDK2 source). Finally, besides clean up (typo, whitespaces, duplicate removal), we introduce the _GNU_EFI macro, in efi.h, to allow for conditional selection of specific gnu-efi API calls, in code that may be compiled with either EDK2 or gnu-efi. Signed-off-by: Pete Batard <pete@akeo.ie> Signed-off-by: Nigel Croxon <nigel.croxon@hpe.com>
2016-08-18 15:42:11 +03:00
IN struct _EFI_SERIAL_IO_PROTOCOL *This,
IN UINT64 BaudRate,
IN UINT32 ReceiveFifoDepth,
IN UINT32 Timeout,
IN EFI_PARITY_TYPE Parity,
IN UINT8 DataBits,
IN EFI_STOP_BITS_TYPE StopBits
2013-01-31 01:25:25 +04:00
);
typedef
EFI_STATUS
(EFIAPI *EFI_SERIAL_SET_CONTROL_BITS) (
Update global protocol GUIDs definitions to match EDK2 This patch introduces the use of the EDK2 names for the global GUID variables, to allow for easier code conversion between EDK2 and gnu-efi. All the existing GUID global variables have also been aliased for backwards compatibility. The patch also completes some of the earlier work with regards to protocol struct definitions to also match the EDK2, with the following caveat: Because some of gnu-efi GUID macro definitions were declared with the name that the EDK2 uses for the protocol struct itself, we have to immediately deprecate the following GUID data aliases: EFI_NETWORK_INTERFACE_IDENTIFIER_PROTOCOL EFI_SIMPLE_NETWORK_PROTOCOL EFI_PCI_IO_PROTOCOL EFI_PXE_BASE_CODE_CALLBACK_PROTOCOL This means that existing code using one of the above will break on compilation. To mitigate this, explicit warnings have been placed at the location where a developer will look for breakage, detailing how they should amend their code. The KnownGuids short labels in guid.c were also updated/amended in a manner that should be a bit more consistent (though I have no idea what the EDK2 does here, since I haven't looked at the actual EDK2 source). Finally, besides clean up (typo, whitespaces, duplicate removal), we introduce the _GNU_EFI macro, in efi.h, to allow for conditional selection of specific gnu-efi API calls, in code that may be compiled with either EDK2 or gnu-efi. Signed-off-by: Pete Batard <pete@akeo.ie> Signed-off-by: Nigel Croxon <nigel.croxon@hpe.com>
2016-08-18 15:42:11 +03:00
IN struct _EFI_SERIAL_IO_PROTOCOL *This,
IN UINT32 Control
2013-01-31 01:25:25 +04:00
);
typedef
EFI_STATUS
(EFIAPI *EFI_SERIAL_GET_CONTROL_BITS) (
Update global protocol GUIDs definitions to match EDK2 This patch introduces the use of the EDK2 names for the global GUID variables, to allow for easier code conversion between EDK2 and gnu-efi. All the existing GUID global variables have also been aliased for backwards compatibility. The patch also completes some of the earlier work with regards to protocol struct definitions to also match the EDK2, with the following caveat: Because some of gnu-efi GUID macro definitions were declared with the name that the EDK2 uses for the protocol struct itself, we have to immediately deprecate the following GUID data aliases: EFI_NETWORK_INTERFACE_IDENTIFIER_PROTOCOL EFI_SIMPLE_NETWORK_PROTOCOL EFI_PCI_IO_PROTOCOL EFI_PXE_BASE_CODE_CALLBACK_PROTOCOL This means that existing code using one of the above will break on compilation. To mitigate this, explicit warnings have been placed at the location where a developer will look for breakage, detailing how they should amend their code. The KnownGuids short labels in guid.c were also updated/amended in a manner that should be a bit more consistent (though I have no idea what the EDK2 does here, since I haven't looked at the actual EDK2 source). Finally, besides clean up (typo, whitespaces, duplicate removal), we introduce the _GNU_EFI macro, in efi.h, to allow for conditional selection of specific gnu-efi API calls, in code that may be compiled with either EDK2 or gnu-efi. Signed-off-by: Pete Batard <pete@akeo.ie> Signed-off-by: Nigel Croxon <nigel.croxon@hpe.com>
2016-08-18 15:42:11 +03:00
IN struct _EFI_SERIAL_IO_PROTOCOL *This,
OUT UINT32 *Control
2013-01-31 01:25:25 +04:00
);
typedef
EFI_STATUS
(EFIAPI *EFI_SERIAL_WRITE) (
Update global protocol GUIDs definitions to match EDK2 This patch introduces the use of the EDK2 names for the global GUID variables, to allow for easier code conversion between EDK2 and gnu-efi. All the existing GUID global variables have also been aliased for backwards compatibility. The patch also completes some of the earlier work with regards to protocol struct definitions to also match the EDK2, with the following caveat: Because some of gnu-efi GUID macro definitions were declared with the name that the EDK2 uses for the protocol struct itself, we have to immediately deprecate the following GUID data aliases: EFI_NETWORK_INTERFACE_IDENTIFIER_PROTOCOL EFI_SIMPLE_NETWORK_PROTOCOL EFI_PCI_IO_PROTOCOL EFI_PXE_BASE_CODE_CALLBACK_PROTOCOL This means that existing code using one of the above will break on compilation. To mitigate this, explicit warnings have been placed at the location where a developer will look for breakage, detailing how they should amend their code. The KnownGuids short labels in guid.c were also updated/amended in a manner that should be a bit more consistent (though I have no idea what the EDK2 does here, since I haven't looked at the actual EDK2 source). Finally, besides clean up (typo, whitespaces, duplicate removal), we introduce the _GNU_EFI macro, in efi.h, to allow for conditional selection of specific gnu-efi API calls, in code that may be compiled with either EDK2 or gnu-efi. Signed-off-by: Pete Batard <pete@akeo.ie> Signed-off-by: Nigel Croxon <nigel.croxon@hpe.com>
2016-08-18 15:42:11 +03:00
IN struct _EFI_SERIAL_IO_PROTOCOL *This,
IN OUT UINTN *BufferSize,
IN VOID *Buffer
2013-01-31 01:25:25 +04:00
);
typedef
EFI_STATUS
(EFIAPI *EFI_SERIAL_READ) (
Update global protocol GUIDs definitions to match EDK2 This patch introduces the use of the EDK2 names for the global GUID variables, to allow for easier code conversion between EDK2 and gnu-efi. All the existing GUID global variables have also been aliased for backwards compatibility. The patch also completes some of the earlier work with regards to protocol struct definitions to also match the EDK2, with the following caveat: Because some of gnu-efi GUID macro definitions were declared with the name that the EDK2 uses for the protocol struct itself, we have to immediately deprecate the following GUID data aliases: EFI_NETWORK_INTERFACE_IDENTIFIER_PROTOCOL EFI_SIMPLE_NETWORK_PROTOCOL EFI_PCI_IO_PROTOCOL EFI_PXE_BASE_CODE_CALLBACK_PROTOCOL This means that existing code using one of the above will break on compilation. To mitigate this, explicit warnings have been placed at the location where a developer will look for breakage, detailing how they should amend their code. The KnownGuids short labels in guid.c were also updated/amended in a manner that should be a bit more consistent (though I have no idea what the EDK2 does here, since I haven't looked at the actual EDK2 source). Finally, besides clean up (typo, whitespaces, duplicate removal), we introduce the _GNU_EFI macro, in efi.h, to allow for conditional selection of specific gnu-efi API calls, in code that may be compiled with either EDK2 or gnu-efi. Signed-off-by: Pete Batard <pete@akeo.ie> Signed-off-by: Nigel Croxon <nigel.croxon@hpe.com>
2016-08-18 15:42:11 +03:00
IN struct _EFI_SERIAL_IO_PROTOCOL *This,
IN OUT UINTN *BufferSize,
OUT VOID *Buffer
2013-01-31 01:25:25 +04:00
);
typedef struct {
UINT32 ControlMask;
// current Attributes
UINT32 Timeout;
UINT64 BaudRate;
UINT32 ReceiveFifoDepth;
UINT32 DataBits;
UINT32 Parity;
UINT32 StopBits;
} SERIAL_IO_MODE;
#define SERIAL_IO_INTERFACE_REVISION 0x00010000
Update global protocol GUIDs definitions to match EDK2 This patch introduces the use of the EDK2 names for the global GUID variables, to allow for easier code conversion between EDK2 and gnu-efi. All the existing GUID global variables have also been aliased for backwards compatibility. The patch also completes some of the earlier work with regards to protocol struct definitions to also match the EDK2, with the following caveat: Because some of gnu-efi GUID macro definitions were declared with the name that the EDK2 uses for the protocol struct itself, we have to immediately deprecate the following GUID data aliases: EFI_NETWORK_INTERFACE_IDENTIFIER_PROTOCOL EFI_SIMPLE_NETWORK_PROTOCOL EFI_PCI_IO_PROTOCOL EFI_PXE_BASE_CODE_CALLBACK_PROTOCOL This means that existing code using one of the above will break on compilation. To mitigate this, explicit warnings have been placed at the location where a developer will look for breakage, detailing how they should amend their code. The KnownGuids short labels in guid.c were also updated/amended in a manner that should be a bit more consistent (though I have no idea what the EDK2 does here, since I haven't looked at the actual EDK2 source). Finally, besides clean up (typo, whitespaces, duplicate removal), we introduce the _GNU_EFI macro, in efi.h, to allow for conditional selection of specific gnu-efi API calls, in code that may be compiled with either EDK2 or gnu-efi. Signed-off-by: Pete Batard <pete@akeo.ie> Signed-off-by: Nigel Croxon <nigel.croxon@hpe.com>
2016-08-18 15:42:11 +03:00
typedef struct _EFI_SERIAL_IO_PROTOCOL {
2013-01-31 01:25:25 +04:00
UINT32 Revision;
EFI_SERIAL_RESET Reset;
EFI_SERIAL_SET_ATTRIBUTES SetAttributes;
EFI_SERIAL_SET_CONTROL_BITS SetControl;
EFI_SERIAL_GET_CONTROL_BITS GetControl;
EFI_SERIAL_WRITE Write;
EFI_SERIAL_READ Read;
SERIAL_IO_MODE *Mode;
Update global protocol GUIDs definitions to match EDK2 This patch introduces the use of the EDK2 names for the global GUID variables, to allow for easier code conversion between EDK2 and gnu-efi. All the existing GUID global variables have also been aliased for backwards compatibility. The patch also completes some of the earlier work with regards to protocol struct definitions to also match the EDK2, with the following caveat: Because some of gnu-efi GUID macro definitions were declared with the name that the EDK2 uses for the protocol struct itself, we have to immediately deprecate the following GUID data aliases: EFI_NETWORK_INTERFACE_IDENTIFIER_PROTOCOL EFI_SIMPLE_NETWORK_PROTOCOL EFI_PCI_IO_PROTOCOL EFI_PXE_BASE_CODE_CALLBACK_PROTOCOL This means that existing code using one of the above will break on compilation. To mitigate this, explicit warnings have been placed at the location where a developer will look for breakage, detailing how they should amend their code. The KnownGuids short labels in guid.c were also updated/amended in a manner that should be a bit more consistent (though I have no idea what the EDK2 does here, since I haven't looked at the actual EDK2 source). Finally, besides clean up (typo, whitespaces, duplicate removal), we introduce the _GNU_EFI macro, in efi.h, to allow for conditional selection of specific gnu-efi API calls, in code that may be compiled with either EDK2 or gnu-efi. Signed-off-by: Pete Batard <pete@akeo.ie> Signed-off-by: Nigel Croxon <nigel.croxon@hpe.com>
2016-08-18 15:42:11 +03:00
} EFI_SERIAL_IO_PROTOCOL;
typedef struct _EFI_SERIAL_IO_PROTOCOL _SERIAL_IO_INTERFACE;
typedef EFI_SERIAL_IO_PROTOCOL SERIAL_IO_INTERFACE;
2013-01-31 01:25:25 +04:00
#endif