README.CMake.txt - Building and using FLTK with CMake ----------------------------------------------------- CONTENTS ========== 1 Introduction to CMake 2 Using CMake to Build FLTK 2.1 Prerequisites 2.2 Options 2.2.1 General CMake Options 2.2.2 FLTK Specific Build Options 2.2.3 Documentation Options 2.2.4 Special Options 2.3 Building under Linux with Unix Makefiles 2.4 Building under Windows with Visual Studio and/or NMake 2.4.1 Building under Windows with Visual Studio 2.4.2 Building under Windows with NMake 2.5 Building under Windows with MinGW using Makefiles 2.6 Building under MacOS with Xcode 2.7 Crosscompiling 3 Using CMake with FLTK 3.1 Library Names 3.2 Library Aliases 3.3 Exported and Imported Targets 3.4 Building a Simple "Hello World" Program with FLTK 3.5 Building a Program Using Fluid Files 3.6 Building a Program Using CMake's FetchContent Module 4 FindFLTK.cmake and find_package(FLTK) 1. Introduction to CMake =========================== CMake was designed to let you create build files for a project once and then compile the project on multiple platforms. Using it on any platform consists of the same steps. Create the CMakeLists.txt build file(s). Run one of the CMake executables, picking your source directory, build directory, and build target. The "cmake" executable is a one-step process with everything specified on the command line. The others let you select options interactively, then configure and generate your platform-specific target. You then run the resulting Makefile / project file / solution file as you normally would. CMake can be run in up to three ways, depending on your platform. "cmake" is the basic command line tool. "ccmake" is the curses based interactive tool. "cmake-gui" is the gui-based interactive tool. Each of these will take command line options in the form of -DOPTION=VALUE. ccmake and cmake-gui will also let you change options interactively. CMake not only supports, but works best with out-of-tree builds. This means that your build directory is not the same as your source directory or with a complex project, not the same as your source root directory. Note that the build directory is where, in this case, FLTK will be built, not its final installation point. If you want to build for multiple targets, such as VC++ and MinGW on Windows, or do some cross-compiling you must use out-of-tree builds exclusively. In-tree builds will gum up the works by putting a CMakeCache.txt file in the source root. More information on CMake can be found on its web site https://www.cmake.org. 2. Using CMake to Build FLTK =============================== 2.1 Prerequisites -------------------- The prerequisites for building FLTK with CMake are staightforward: CMake 3.15 or later and a recent FLTK release, snapshot, or Git download (working copy). Installation of CMake is covered on its web site. This howto will cover building FLTK with the default options using CMake under Linux and MinGW with Unix Makefiles. Chapter 2.5 shows how to use a MinGW cross compiling toolchain to build a FLTK library for Windows under Linux. Other platforms are just as easy to use. 2.2 Options -------------- Options can be specified to CMake with the -D flag: cmake -D = Example: cmake -D CMAKE_BUILD_TYPE=Debug Notes: the space between '-D' and the option name can be omitted. Option values must be quoted if they contain spaces. Other CMake tools are `ccmake` and `cmake-gui` but these are not described here. All options have sensible defaults so you won't usually need to specify them explicitly. 2.2.1 General CMake Options ------------------------------ There are only three CMake options that you may want to specify: CMAKE_BUILD_TYPE This specifies what kind of build this is i.e. Release, Debug... Platform specific compile/link flags/options are automatically selected by CMake depending on this value. CMAKE_INSTALL_PREFIX Where everything will go on install. Defaults are /usr/local for Unix and C:\Program Files\FLTK for Windows. CMAKE_OSX_ARCHITECTURES (macOS only, ignored on other platforms) Set this to either "arm64", "x86_64", or a list of both "arm64;x86_64". The latter will build "universal apps" on macOS, whereas the former will either build Intel (x86_64) or Apple Silicon aka M1 (arm64) apps. The default is to build for the host processor architecture. Note: the CMake variable BUILD_SHARED_LIBS is ignored by FLTK. FLTK builds static libs by default and can optionally build shared libs as well. Please see FLTK_BUILD_SHARED_LIBS instead. 2.2.2 FLTK Specific Build Options ------------------------------------ Following are the FLTK specific options. Platform specific options are ignored on other platforms. For convenience the list of options is ordered alphabetically except "Documentation Options" and "Special Options" that follow in their own sections below. FLTK_ABI_VERSION - default EMPTY Use a numeric value corresponding to the FLTK ABI version you want to build in the form 1xxyy for FLTK 1.x.y (xx and yy with leading zeroes). The default ABI version is 1xx00 (the stable ABI throughout all patch releases of one minor FLTK version). The highest ABI version you may choose is 1xxyy for FLTK 1.x.y (again with leading zeroes). Please see README.abi-version.txt for more information about which ABI version to select. FLTK_ARCHFLAGS - default EMPTY Extra "architecture" flags used as C and C++ compiler flags. These flags are also "exported" to fltk-config. FLTK_BACKEND_WAYLAND - default ON (only Unix/Linux) Enable the Wayland backend for all window operations, Cairo for all graphics and Pango for text drawing (Linux+FreeBSD only). Resulting FLTK apps use Wayland when a Wayland compositor is available at runtime, and use X11 for their window operations otherwise (unless FLTK_BACKEND_X11 is OFF), but keep using Cairo and Pango - see README.Wayland.txt. If FLTK_BACKEND_X11 has been turned OFF and there is no Wayland compositor at runtime, then FLTK programs fail to start. FLTK_BACKEND_X11 - default ON on Unix/Linux, OFF elsewhere (Windows, macOS). Enable or disable the X11 backend on platforms that support it. - Unix/Linux: enable or disable the X11 backend when building with Wayland (FLTK_BACKEND_WAYLAND), otherwise this option must be ON. - macOS: enable the X11 backend instead of standard system graphics. This requires XQuartz or a similar X11 installation. This option is tested only with XQuartz by the FLTK team. Use this only if you know what you do and if you have installed X11. - Windows/Cygwin: enable X11 backend for Cygwin platforms. This option is currently (as of FLTK 1.4.0) not supported on Windows. Note: On platforms that support Wayland you may set FLTK_BACKEND_WAYLAND=ON (this is the default) and FLTK_BACKEND_X11=OFF to build a Wayland-only library or vice versa for an X11-only library. FLTK_BUILD_EXAMPLES - default OFF Build the example programs in the 'examples' directory. FLTK_BUILD_FLTK_OPTIONS - default ON Build the FLTK options editor ("fltk-options"). FLTK_BUILD_FLUID - default ON Build the Fast Light User-Interface Designer ("fluid"). FLTK_BUILD_FORMS - default ON Build the (X)Forms compatibility library. This option is ON by default for backwards compatibility but can safely be turned OFF if you don't need (X)Forms compatibility. FLTK_BUILD_GL - default ON Build the OpenGL support library fltk_gl (fltk::gl) and enable OpenGL support in user programs using fltk_gl. FLTK_BUILD_SHARED_LIBS - default OFF Normally FLTK is built as static libraries which makes more portable binaries. If you want to use shared libraries, this will build them too. You can use shared FLTK libs in your own CMake projects by appending "-shared" to FLTK target names as described in section 3.1 and 3.2. FLTK_BUILD_TEST - default ON in top-level build, OFF in sub-build Build the test and demo programs in the 'test' directory. The default is ON if the FLTK build is in a top-level project so all test and demo programs are built. If FLTK is built as a subproject only the Library and the tools (fluid and fltk-config) are built by default. FLTK_GRAPHICS_CAIRO - default OFF (Unix/Linux: X11 + Wayland only). Make all drawing operations use the Cairo library (rather than Xlib), producing antialiased graphics (X11 platform: implies FLTK_USE_PANGO). When using Wayland this option is ignored (Wayland uses Cairo). FLTK_GRAPHICS_GDIPLUS - default ON (Windows only). Make FLTK use GDI+ to draw oblique lines and curves resulting in antialiased graphics. If this option is OFF standard GDI is used. FLTK_MSVC_RUNTIME_DLL - default ON (Windows only: Visual Studio and NMake). Select whether the build uses the MS runtime DLL (ON) or not (OFF). Default is ON: either /MD or /MDd for Release or Debug, respectively. Select OFF for either /MT or /MTd for Release or Debug, respectively. FLTK_OPTION_CAIRO_EXT - default OFF Enable extended libcairo support - see README.Cairo.txt. FLTK_OPTION_CAIRO_WINDOW - default OFF Enable support of class Fl_Cairo_Window (all platforms, requires the Cairo library) - see README.Cairo.txt. FLTK_OPTION_FILESYSTEM_SUPPORT - default ON FLTK_OPTION_LARGE_FILE - default ON Enables large file (>2G) support. FLTK_OPTION_OPTIM - default EMPTY Extra optimization flags for the C and C++ compilers, for instance "-Wall -Wno-deprecated-declarations". FLTK_OPTION_PRINT_SUPPORT - default ON When turned off, the Fl_Printer class does nothing and the Fl_PostScript_File_Device class cannot be used, but the FLTK library is somewhat smaller. This option makes sense only on the Unix/Linux platform or on macOS when FLTK_BACKEND_X11 is ON. FLTK_OPTION_STD - default OFF This option allows FLTK to use some specific features of modern C++ like std::string in the public API of FLTK 1.4.x. Users turning this option ON can benefit from some new functions and methods that return std::string or use std::string as input parameters. Note: This option will be removed in the next minor (1.5.0) or major release which will use std::string and other modern C++ features. FLTK_OPTION_SVG - default ON FLTK has a built-in SVG library and can create (write) SVG image files. Turning this option off disables SVG (read and write) support. FLTK_USE_KDIALOG - default ON Under the KDE desktop, allows class Fl_Native_File_Chooser to use the kdialog utility program to construct its file dialog windows, when that utility is available at run time on the system. This option makes sense only under X11 or Wayland. FLTK_USE_LIBDECOR_GTK - default ON (Wayland only). Allow to use libdecor's GTK plugin to draw window titlebars. Otherwise FLTK does not use GTK and apps will not need linking to GTK. This feature is always 'ON' if FLTK_USE_SYSTEM_LIBDECOR is 'ON'. FLTK_USE_PANGO - default OFF (see note below) Enables use of the Pango library for drawing text. Pango supports all unicode-defined scripts and gives FLTK limited support of right-to-left scripts. This option makes sense only under X11 or Wayland, and also requires Xft. This option is ignored (always enabled) if Wayland or FLTK_GRAPHICS_CAIRO is ON. FLTK_USE_POLL - default OFF Deprecated: don't turn this option ON. FLTK_USE_PTHREADS - default ON except on Windows. Enables multithreaded support with pthreads if available. This option is ignored (switched OFF internally) on Windows except when using Cygwin. FLTK_USE_SYSTEM_LIBDECOR - default OFF (Wayland only) This option makes FLTK use package libdecor-0-dev to draw window titlebars under Wayland. When OFF or when this package has a version ≤ 0.2.2, FLTK uses its bundled copy of libdecor to draw window titlebars. As of early 2024, no version > 0.2.2 of package libdecor-0-dev is available yet. FLTK_USE_SYSTEM_LIBJPEG - default ON (macOS and Windows: OFF) FLTK_USE_SYSTEM_LIBPNG - default ON (macOS and Windows: OFF) FLTK_USE_SYSTEM_ZLIB - default ON (macOS and Windows: OFF) FLTK has built in jpeg, zlib, and png libraries. These options let you use system libraries instead, unless CMake can't find them. If you set any of these options to OFF, then the built in library will be used. The default is ON on Linux/Unix platforms but OFF on Windows and macOS because of potential incompatibilities on Windows and macOS whereas the system libraries can typically be used on Linux/Unix. Note: if any one of libpng or zlib is not found on the system, both libraries are built using the bundled ones and a warning is issued. FLTK_USE_XCURSOR - default ON FLTK_USE_XFIXES - default ON FLTK_USE_XFT - default ON FLTK_USE_XINERAMA - default ON FLTK_USE_XRENDER - default ON These are X11 extended libraries. These libs are used if found on the build system unless the respective option is turned off. 2.2.3 Documentation Options ------------------------------ These options are only available if `doxygen' is installed and found. PDF related options require also `latex'. FLTK_BUILD_HTML_DOCS - default ON FLTK_BUILD_PDF_DOCS - default ON These options can be used to enable HTML documentation generation with doxygen. If these are ON the build targets 'html', 'pdf', and 'docs' are generated but must be built explicitly. Technically the build targets are generated but excluded from 'ALL'. You can safely leave these two options ON if you want to save build time because the docs are not built automatically. FLTK_INCLUDE_DRIVER_DOCS - default OFF This option adds driver documentation to HTML and PDF docs (if ON). This option is marked as "advanced" since it is only useful for FLTK developers and advanced users. It is only used if at least one of the documentation options above is ON as well. FLTK_INSTALL_HTML_DOCS - default OFF FLTK_INSTALL_PDF_DOCS - default OFF If these options are ON then the HTML and/or PDF docs are installed when the 'install' target is executed, e.g. with `make install'. You need to select above options FLTK_BUILD_*_DOCS as well. 2.2.4 Special Options ------------------------ FLTK_INSTALL_LINKS - default OFF Deprecated: install "compatibility" links to compensate for typos in include statements (for case sensitive file systems only). You should not use this option, please fix the sources instead for better cross-platform compatibility. 2.3 Building under Linux with Unix Makefiles ----------------------------------------------- After unpacking the FLTK source, go to the root of the FLTK tree and type the following. mkdir build cd build cmake .. make sudo make install (optional) IMPORTANT: The trailing ".." on the cmake command must be specified (it is NOT an ellipsis). ^^^^^^^^^^^^^^^^^ This will build and install a default configuration FLTK. Some flags can be changed during the 'make' command, such as: make VERBOSE=on which builds in verbose mode, so you can see all the compile/link commands. Hint: if you intend to build several different versions of FLTK, e.g. a Debug and a Release version, or multiple libraries with different ABI versions or options, then use subdirectories in the build directory, like this: mkdir build cd build mkdir debug cd debug cmake -D 'CMAKE_BUILD_TYPE=Debug' ../.. make sudo make install (optional) 2.4 Building under Windows with Visual Studio and/or NMake ------------------------------------------------------------- Building with CMake under Visual Studio may require to specify the CMake generator with the -G"Visual Studio ..." command line switch, or the generator can be selected interactively in the GUI (cmake-gui). If you are not sure which one to select use `cmake --help` which lists all generators known to CMake on your system. 2.4.1 Building under Windows with Visual Studio ------------------------------------------------- CMake often finds an installed Visual Studio generator and uses it w/o using the commandline switch, particularly if you are using a special "Visual Studio Command Prompt": - Hit the "Windows" key - Type "developer command ..." ... until you see something like "Developer Command Prompt for VS xxxx" (replace 'xxxx' with your installed Visual Studio version) - Activate the "app" to execute the command prompt (like an old "DOS" shell) - Inside this command prompt window, run your installed `cmake` (command line) or `cmake-gui` (GUI) program. You may need to specify the full path to this program. If you use `cmake-gui` you can select the source and the build folders in the GUI, otherwise change directory to where you downloaded and installed the FLTK sources and execute: `cmake` -G "Visual Studio xxx..." -B build cd build This creates the Visual Studio project files (FLTK.sln and more) in the 'build' directory. Open Visual Studio, choose File -> Open -> Project, and pick the "FLTK.sln" created in the previous step. (Or, if only one version of the Visual Studio compiler is installed, you can just run from DOS: .\FLTK.sln) Make sure the pulldown menu has either "Release" or "Debug" selected in the "Solution Configurations" pulldown menu. In the "Solution Explorer", right click on: Solution 'FLTK' (## projects) ... and in the popup menu, choose "Build Solution" or choose 'Build/Build Solution' or 'Build/Rebuild Solution' from the menu at the top of the window. That's it, that should build FLTK. The test programs (*.exe) can be found relative to the 'build' folder in build\bin\test\Release\*.exe build\bin\test\Debug\*.exe ... and the FLTK include files (*.H & *.h) your own apps can compile with can be found in: build\FL *and* [1] in the source folder where you downloade FLTK, e.g. in C:\fltk-1.4.x\FL ... and the FLTK library files (*.lib) which your own apps can link with can be found in: Release: build\lib\Release\*.lib Debug: build\lib\Debug\*.lib [1] If you want to build your own FLTK application directly using the build directories (i.e. without "installation") you need to include both the build tree (first) and then the FLTK source tree in the compiler's header search list. 2.4.2 Building under Windows with NMake ----------------------------------------- This example uses cmake to generate + build FLTK in Release mode using nmake, using purely the command line (never need to open the Visual Studio IDE) using Multithreaded (/MT): mkdir build-nmake cd build-nmake cmake -G "NMake Makefiles" -D CMAKE_BUILD_TYPE=Release -D FLTK_MSVC_RUNTIME_DLL=off .. nmake which results in a colorful percentage output crawl similar to what we see with unix 'make'. Instead of running `nmake` directly you can also use cmake to build: cmake --build . 2.5 Building under Windows with MinGW using Makefiles -------------------------------------------------------- Building with CMake under MinGW requires you to specify the CMake Generator with the -G command line switch. Using cmake -G "Unix Makefiles" /path/to/fltk is recommended by the FLTK team if you have installed MinGW with the MSYS environment. You can use the stock Windows CMake executables, but you must run the CMake executables from within the MinGW environment so CMake can use your MinGW PATH to find the compilers and build tools. Example: alias cmake='/c/CMake/bin/cmake' alias cmake-gui='/c/CMake/bin/cmake-gui' mkdir build cd build cmake -G "Unix Makefiles" -D 'CMAKE_BUILD_TYPE=Debug' .. Note the path to FLTK ".." in the last command line. Depending on where you installed CMake you may need to adjust the path's in the alias commands. 2.6 Building under MacOS with Xcode ------------------------------------ Building with CMake under Xcode requires the CMake generator with the -G command line switch. This step need to be done only once. If any of the cmake related files are updated, Xcode will rerun cmake for you. 1) Open the MacOS Terminal 2) Change to the directory containing the FLTK project. For example: > cd ~/dev/fltk-1.4.x 3) Create a build directory > mkdir build > cd build 4) If you plan different build versions, it is useful to create another subdirectory level > mkdir Xcode > cd Xcode 5) Let CMake create the required IDE files > cmake -G Xcode ../.. This step should end in the message: -- Build files have been written to: .../dev/fltk-1.4.x/build/Xcode 5a) To build the Release version of FLTK, use > cmake -G Xcode -D CMAKE_BUILD_TYPE=Release ../.. 6) Launch Xcode from the Finder or from the Terminal: > open ./FLTK.xcodeproj When Xcode starts, it asks if it should "Autocreate Schemes". Click on "Automatically Create Schemes" to confirm. 7) To build and test FLTK, select the scheme "ALL_BUILD" and hit Cmd-B to build. Then select the scheme "demo" and hit Cmd-R to run the FLTK Demo. 8) The interactive user interface tool "Fluid" will be located in build/Xcode/bin/Debug. The example apps are in .../bin/examples/Debug. Static libraries are in .../lib/Debug/ 9) The "install" Scheme currently fails because it is run with user permission. 2.7 Crosscompiling --------------------- Once you have a crosscompiler going, to use CMake to build FLTK you need two more things. You need a toolchain file which tells CMake where your build tools are. The CMake website is a good source of information on this file. Here's one for MinGW (64-bit) under Linux. ---- # CMake Toolchain File for MinGW-w64 (64-bit) Cross Compilation # the name of the target operating system set(CMAKE_SYSTEM_NAME Windows) # which tools to use set(CMAKE_C_COMPILER /usr/bin/x86_64-w64-mingw32-gcc) set(CMAKE_CXX_COMPILER /usr/bin/x86_64-w64-mingw32-g++) set(CMAKE_RC_COMPILER /usr/bin/x86_64-w64-mingw32-windres) # here is where the target environment located set(CMAKE_FIND_ROOT_PATH /usr/x86_64-w64-mingw32) # adjust the default behavior of the FIND_XXX() commands: # search programs in the host environment set(CMAKE_FIND_ROOT_PATH_MODE_PROGRAM NEVER) # search headers and libraries in the target environment set(CMAKE_FIND_ROOT_PATH_MODE_LIBRARY ONLY) set(CMAKE_FIND_ROOT_PATH_MODE_INCLUDE ONLY) set(CMAKE_INSTALL_PREFIX ${CMAKE_FIND_ROOT_PATH}/usr CACHE FILEPATH "install path prefix") # initialize required linker flags set(CMAKE_EXE_LINKER_FLAGS_INIT "-static-libgcc -static-libstdc++") # end of toolchain file ---- Not too tough. The other thing you need is a native installation of FLTK on your build platform. This is to supply the fluid executable which will compile the *.fl into C++ source and header files. So, again from the FLTK tree root. mkdir mingw cd mingw cmake -DCMAKE_TOOLCHAIN_FILE=~/projects/toolchain/Toolchain-mingw32.cmake .. make sudo make install IMPORTANT: The trailing ".." on the cmake command must be specified (it is NOT an ellipsis). ^^^^^^^^^^^^^^^^^ This will create a default configuration FLTK suitable for mingw/msys and install it in the /usr/x86_64-w64-mingw32/usr tree. Note: replace 'x86_64-w64-mingw32' with your cross toolchain location as required. 3. Using CMake with FLTK =========================== The CMake Export/Import facility can be thought of as an automated fltk-config. For example, if you link your program to the FLTK library, it will automatically link in all of its dependencies. This includes any special flags, i.e. on Linux it includes the -lpthread flag. This howto assumes that you have FLTK libraries which were built using CMake, installed. Building them with CMake generates some CMake helper files which are installed in standard locations, making FLTK easy to find and use. In the following examples we set the CMake cache variable 'FLTK_DIR' so CMake knows where to find the FLTK configuration file 'FLTKConfig.cmake'. It is important (recommended practice) to set this as a CMake cache variable which enables the user executing 'cmake' to override this path either on the commandline or interactively using the CMake GUI 'cmake-gui' or 'ccmake' on Unix/Linux, for instance like this: $ mkdir build $ cd build $ cmake -G "Unix Makefiles" -S.. -D "FLTK_DIR=/home/me/fltk" 3.1 Library Names -------------------- When you use the target_link_libraries() command, CMake uses its own internal "target names" for libraries. The original fltk library names in the build tree are: fltk fltk_forms fltk_images fltk_gl The bundled image and zlib libraries (if built): fltk_jpeg fltk_png fltk_z Append suffix "-shared" for shared libraries (Windows: DLL's). These library names are used to construct the filename on disk with system specific prefixes and postfixes. For instance, on Linux/Unix 'fltk' is libfltk.a and the shared library (fltk-shared) is libfltk.so.1.4.0 (in FLTK 1.4.0) with additional system specific links. Note: since FLTK 1.4.0 the library fltk_cairo is no longer necessary and should be removed from CMake files of user projects. fltk_cairo is now an empty library solely for backwards compatibility and will be removed in the future. 3.2 Library Aliases ---------------------- Since FLTK 1.4.0 "aliases" for all libraries in the FLTK build tree are created in the namespace "fltk::". These aliases should always be used by consumer projects (projects that use FLTK) for several reasons which are beyond the scope of this README file. The following table shows the FLTK libraries and their aliases in the FLTK build tree. Library Name Alias Shared Library Alias Notes -------------------------------------------------------------- fltk fltk::fltk fltk::fltk-shared [1] fltk_forms fltk::forms fltk::forms-shared [2] fltk_gl fltk::gl fltk::gl-shared [2] fltk_images fltk::images fltk::images-shared [2] fltk_jpeg fltk::jpeg fltk::jpeg-shared [3] fltk_png fltk::png fltk::png-shared [3] fltk_z fltk::z fltk::z-shared [3] [1] The basic FLTK library. Use this if you don't need any of the other libraries for your application. [2] Use one or more of these libraries if you have specific needs, e.g. if you need to read images (fltk::images), OpenGL (fltk::gl), or (X)Forms compatibility (fltk::forms). If you use one of these libraries in your CMakeLists.txt then fltk::fltk will be included automatically. [3] The bundled libraries are only built if requested and are usually not needed in user projects. They are linked in with fltk::images automatically if they were built with FLTK. The only reason you may need them would be if you used libpng, libjpeg, or zlib functions directly in your application and need to use the bundled FLTK libs (e.g. on Windows). 3.3 Exported and Imported Targets ------------------------------------ CMake terminology is to "export" and "import" library "targets". FLTK's CMake files export targets and its CONFIG module FLTKConfig.cmake imports targets so user projects can use them. Hence, if you use CMake's CONFIG mode to find FLTK all library targets will be defined using the namespace convention listed above in the "Alias" column. This is what user projects are intended to use. In addition to the library targets FLTK defines the "imported target" 'fltk::fluid' which can be used to generate source (.cxx) and header (.h) files from fluid (.fl) files. Another target fltk::fltk-config can be used to set (e.g.) system or user specific FLTK options. This would usually be executed in the installation process of a user project but should rarely be needed and is beyound the scope of this documentation. 3.4 Building a Simple "Hello World" Program with FLTK -------------------------------------------------------- Here is a basic CMakeLists.txt file using FLTK. It is important that this file can only be used as simple as it is if you use find_package() in `CONFIG` mode as shown below. This requires that the FLTK library itself has been built with CMake. --- cmake_minimum_required(VERSION 3.15) project(hello) # optional (see below): set(FLTK_DIR "/path/to/fltk" CACHE FILEPATH "FLTK installation or build directory") find_package(FLTK CONFIG REQUIRED) add_executable (hello WIN32 MACOSX_BUNDLE hello.cxx) target_link_libraries(hello PRIVATE fltk::fltk) --- We recommend to use `cmake_minimum_required(VERSION 3.15)` or higher for building projects that use FLTK. Lower CMake versions may work for user projects but this is not tested by FLTK developers. The optional `set(FLTK_DIR ...)` command is a superhint to the find_package command. This is very useful if you don't install or have a non-standard install location. The path you give to it must be that of a directory that contains the file FLTKConfig.cmake. You can omit this statement if CMake finds the required FLTK version without it. This variable is stored in the CMake Cache so users can change it with the ususal CMake GUI interfaces (ccmake, cmake-gui) or on the CMake commandline (-D FLTK_DIR=...). The find_package command tells CMake to find the package FLTK, REQUIRED means that it is an error if it's not found. CONFIG tells it to search only for the FLTKConfig.cmake file, not using the FindFLTK.cmake "module" supplied with CMake, which doesn't work with this version of FLTK. "WIN32 MACOSX_BUNDLE" in the add_executable() command tells CMake that this is a GUI app. It is ignored on other platforms than Windows or macOS, respectively, and should always be present with FLTK GUI programs for better portability - unless you explicitly need to build a "console program" on Windows. Once the package is found (in CONFIG mode, as described above) all built FLTK libraries are "imported" as CMake "targets" or aliases and can be used directly. These CMake library targets contain all necessary informations to be used without having to know about additional include directories or other library dependencies. This is what is called "Modern CMake". Older FLTK versions required to use the variables FLTK_INCLUDE_DIRS and FLTK_LIBRARIES (among others). These variables and related commands are no longer necessary if your project (CMakeLists.txt) uses CMake's CONFIG mode as described in this file. The target_link_libraries() command is used to specify all necessary FLTK libraries. Thus you may use fltk::fltk, fltk::images, fltk::gl, fltk::forms, or any combination. fltk::fltk is linked automatically if any of the other libs is included. 3.5 Building a Program Using Fluid Files ------------------------------------------- CMake has a command named fltk_wrap_ui which helps deal with fluid *.fl files. Unfortunately it is broken in CMake 3.4.x but it seems to work in 3.5 and later CMake versions. We recommend to use add_custom_command() to achieve the same result in a more explicit and well-defined way. This is a more basic approach and should work for all CMake versions. It is described below. Here is a sample CMakeLists.txt which compiles the CubeView example from a directory you've copied the test/Cube* files to. --- cmake_minimum_required(VERSION 3.15) project(CubeView) # change this to your fltk build directory set(FLTK_DIR "/path/to/fltk" CACHE FILEPATH "FLTK installation or build directory") find_package(FLTK CONFIG REQUIRED) # run fluid -c to generate CubeViewUI.cxx and CubeViewUI.h files add_custom_command( OUTPUT "CubeViewUI.cxx" "CubeViewUI.h" COMMAND fltk::fluid -c ${CMAKE_CURRENT_SOURCE_DIR}/CubeViewUI.fl ) add_executable(CubeView WIN32 MACOSX_BUNDLE CubeMain.cxx CubeView.cxx CubeViewUI.cxx) target_include_directories(CubeView PRIVATE ${CMAKE_CURRENT_BINARY_DIR}) target_include_directories(CubeView PRIVATE ${CMAKE_CURRENT_SOURCE_DIR}) target_link_libraries (CubeView PRIVATE fltk::gl) --- You can repeat the add_custom_command for each fluid file or if you have a large number of them see the fltk_run_fluid() function in CMake/FLTK-Functions.cmake for an example of how to run it in a loop. The two lines target_include_directories(CubeView PRIVATE ${CMAKE_CURRENT_BINARY_DIR}) target_include_directories(CubeView PRIVATE ${CMAKE_CURRENT_SOURCE_DIR}) add the current build ("binary") and source directories as include directories. This is necessary for the compiler to find the local header files since the fluid-generated files (CubeViewUI.cxx and CubeViewUI.h) are created in the current build directory and other header files may be in the source directory (depending on your project). 3.6 Building a Program Using CMake's FetchContent Module ----------------------------------------------------------- FLTK can be downloaded and built within a user project using CMake's FetchContent module. A sample CMakeLists.txt file follows. You may need to adjust it to your configuration. --- cmake_minimum_required(VERSION 3.15) project(hello) include(FetchContent) FetchContent_Declare(FLTK GIT_REPOSITORY https://github.com/fltk/fltk GIT_TAG master GIT_SHALLOW TRUE ) message(STATUS "Download and build FLTK if necessary, please wait...") FetchContent_MakeAvailable(FLTK) message(STATUS "Download and build FLTK - done.") add_executable (hello WIN32 MACOSX_BUNDLE hello.cxx) target_link_libraries(hello PRIVATE fltk::fltk) --- This is as simple as it can be. The CMake FetchContent module is used to download the FLTK sources from their Git repository and to build them. Note that this will download and build the FLTK library during the CMake configure phase which can take some time. Therefore the statement `FetchContent_MakeAvailable()` is wrapped in `message(STATUS "...")` commands to let the user know what's going on. 4 FindFLTK.cmake and find_package(FLTK) ========================================== The FindFLTK.cmake module provided by CMake which is also used in the CMake command find_package(FLTK) does not yet support FLTK's new "Modern CMake" features. Unfortunately this module has to be used if the FLTK library wasn't built with CMake and thus CONFIG mode can't be used. In this case CMake falls back to MODULE mode and find_package() uses this old CMake module. There are plans to provide a FindFLTK.cmake module with FLTK 1.4.0 but this module is not yet written. Look here for further info if you need it...