######################################################################
#
#  Watcom C specific makefile, multiplatform
#
#
#  The following macross must be set active when this file is called
#  -D parameter, e.g. -DPROJ=fltk
#  ROOT   = root of project (e.g. FLTK directory)
#  PROJ   = project name (e.g. fltk)
#
#  The following environment variable must be set. If you have multiple
#  Watcom versions, use the setvars file in the Watcom directory to set it.
#  WATCOM = root of Watcom C
######################################################################

#
# The following options must be set when calling this wmake file
# (case-sensitive):
# D (debug/release mode): d for debug mode,
#                         r for release mode
# O (target environment): d = DOS 32 bits
#                         o = OS/2 32 bits
#                         w = Windows 32 bit
#                         l = Linux Intel (experimental, no graphics yet (OW 1.3))
#
#
# If not set, debug mode and target=host (that is, no cross-compiling).
# Example: wmake -h -f makefile.wat d=r o=w
#
# Following macros can be used to add/override existing macros in
# this file.
# EXTRA_INCLUDE_DIRS        # Non-Watcom (project) include dirs
# ODIR                      # Output directory if not default
# ROOT                      # Project root. If not given, .
# PROJ                      # Project name.
# LIBS                      # Extra libs to link in
# LIBDIR                    # Project library directory. Default: PROJ\LIB
# LIBNAMEROOT               # Project rootname of output library. Default: PROJ\Lib\Proj
# EXTRA_LIBS                # Target specific include libs

!ifndef D
MODE=d                      # default is debug mode
!else
!  ifeq D d
MODE=d
!  else ifeq D r
MODE=r
!  else
CONFIG_ERROR_MSG=Unrecognized mode: $(D)
!  endif
!endif

# If target is specified, check its validity; if not specified, the target is
# the host platform itself.

!ifdef O
!  ifeq O d
TARGET=dos
!  else ifeq O o
TARGET=os2
!  else ifeq O w
TARGET=nt
!  else ifeq O l
TARGET=linux
!  else
CONFIG_ERROR_MSG=Unrecognized target: $(O)
!  endif
!else
!  ifdef __DOS__
TARGET=dos
!  else ifdef __OS2__
TARGET=os2
!  else ifdef __NT__
TARGET=nt
!  else ifdef __LINUX__
TARGET=linux
!  endif
!endif

#
# Now we know the target. Determine the link target. For fltk, this
# is always GUI for Windows and OS/2. For possible link targets (aliases
# for a set of linker directives) see wlsystem.lnk in Watcom's BINW directory.
#
!ifeq TARGET dos
LINKTARGET=dos32a
!else ifeq TARGET os2
LINKTARGET=os2v2_pm
!else ifeq TARGET nt
LINKTARGET=nt_win
!else
LINKTARGET=linux
!endif

#
# Very important: specify the sequence of extensions. Wmake will try to make a target
# with an extension from the first file of the same name with an extension to the right.
# E.g. it tries to make hello.obj from hello.cxx, or hello.cpp etc, but never from hello.exe
#
.EXTENSIONS :
.EXTENSIONS : .exe .lib .obj .cxx .cpp .c .h .fl

#
# Create output directory name if not already supplied. To allow
# cross-development, must include target name.
#
!ifndef ODIR
ODIR=$(D)_$(TARGET)
!endif

#
# Contruct the libname from the root plus D and O macros, so that
# multiple LIBS can co-exists, e.g. FLTK_DW and FLTK_RW for Win32.
#
!ifndef LIBDIR
LIBDIR=$(ROOT)\lib\
!endif
!ifndef LIBNAMEROOT
LIBNAMEROOT=$(PROJ)
!endif
!ifndef LIBNAME
LIBNAME = $(LIBDIR)$(LIBNAMEROOT)_$(D)$(O).lib
# FLTK has other 'global' libs. Define the names here so that any application
# using FLTK can use them by just including this mif file.
LIBNAMEFL = $(LIBDIR)$(LIBNAMEROOT)_fl_$(D)$(O).lib
LIBNAMEGL = $(LIBDIR)$(LIBNAMEROOT)_gl_$(D)$(O).lib
LIBNAMEIMG = $(LIBDIR)$(LIBNAMEROOT)_img_$(D)$(O).lib
LIBS = $(LIBNAME) $(LIBNAMEFL) $(LIBNAMEGL) $(LIBNAMEIMG)
!endif

# Set target environment options for the project

!ifeqi TARGET  nt                   # WINDOWS 32 bit
SYSDEF= -DWIN32
ASYSDEF=
SYSLIBS=mpr.lib glu32.lib opengl32.lib
EXEEXT=.exe

!else ifeqi TARGET linux            # Linux Intel 32 bit generic
SYSDEF=
ASYSDEF=
EXEEXT=.exe                         # We need some exe extension else the build won't work

!else ifeqi TARGET os2              # OS/2 32 bit
SYSDEF=
ASYSDEF=
EXEEXT=.exe

!else ifeqi TARGET dos              # DOS 32 bit
SYSDEF=
ASYSDEF=
EXEEXT=.exe

!endif


######################################################################
#
# End of compiler- and environment specific options
#
# Note !message will print before any actions ('PRE'processor!), and thus
#      will not reflect results of any rules (like set xxx=yyy).
#      echo is a rule itself, and will reflect results of preceding rules.
#
######################################################################

.BEFORE :
!ifdef CONFIG_ERROR_MSG
!   message
!   message Configuration error:
!   message $(CONFIG_ERROR_MSG)
!   message
    %abort
!endif
    @if not exist $(ODIR) mkdir $(ODIR) >nul
!ifeqi TARGET dos
   @set INCLUDE=$(%WATCOM)\H;$(EXTRA_INCLUDE_DIRS)
!else ifeqi TARGET os2
   @set INCLUDE=$(%WATCOM)\H;$(%WATCOM)\H\OS2;$(EXTRA_INCLUDE_DIRS)
!else ifeqi TARGET nt
   @set INCLUDE=$(%WATCOM)\H;$(%WATCOM)\H\NT;$(EXTRA_INCLUDE_DIRS)
!else ifeqi TARGET linux
   @set INCLUDE=$(%WATCOM)\LH;$(EXTRA_INCLUDE_DIRS)
!endif

#    @set LIB=$(LIBPATH)
#    @echo Top dir: $(PROJ)
    @echo Include dirs: $(%INCLUDE)
#    @echo Lib dirs: $(LIBDIRS)
#    @echo Libname=$(LIBNAME)
#    @echo extra libs: $(LIBS)
#    @echo Wmake version $(__VERSION__)
#    @echo Wmake parameters: $(__MAKEOPTS__)
#    @echo Compiler : $(CC) $(CCOPTS0) $(CCOPTS1) $(CCOPTS2) $(CCOPTS3)
#    @echo Librarian: $(LIB)
#    @echo Linker   : $(LN) $(LNOPTS)
#    @echo Project  : $(P)

!ifeqi D d
WCADEBUG=-d1                        # debug opts for wasm
WCCDEBUG=-d2 -s -ors -wcd=666 -wcd=836 # debug opts for wcc. NOTE: -we is to make errors of all warnings
WCLDEBUG=d all                      # debug opts for wlink
# WCCTIMING=-et         # if added to CC command line will generate timing file after execution
!else
#
# WCADEBUG=                                    # debug opts for wasm
WCCDEBUG= -ors -s -wcd=666 -wcd=836            # release opts for wcc
# WCLDEBUG=                                    # release opts for wlink
!endif

#       Conventions Watcom

# Tell default paths based on extension
.fl             : .
.h              : .
#.lib            : .
.c              : .
.cpp            : .
.cxx            : .
.obj            : $(ODIR)
.exe            : $(ODIR)

#
# Tell wmake to use DLL versions of some commands (much quicker)
#
!loaddll wcc386 wccd386
!loaddll wpp386 wppd386
!loaddll wlink  wlink
!loaddll wlib   wlibd

CCOPTS0=-6r -zq
CCOPTS1=$(WCCDEBUG) -bt=$(TARGET) -fp6 -fpi87 # 1st part of Watcom opts
CCOPTS2=-mf -wce=130 -wx -zq                  # -j # 2nd part of Watcom opts
CCOPTS3=-fo$(ODIR)\$^&.obj                    # 3rd part Watcom opts
COPTS=-zm
CPPOPTS=-zmf -zv -fx

LNOPTS=sys $(LINKTARGET) $(WCLDEBUG) op symf,q,m,el,vfr op st=32k # linker options
LIBOPTS= -b -q -p=512 -c                     # librarian options
LN=wlink                                     # Watcom linker
AS=wasm                                      # Watcom assembler
cc=wcc386                                    # Watcom C compiler
cpp=wpp386                                   # Watcom C++ compiler
LIB=wlib                                     # Watcom librarian

#
# Compilation
#
.c.obj: .AUTODEPEND
    $(CC) $(SYSDEF) $(DEBUGDEF) $(CCOPTS0) $(CCOPTS1) $(CCOPTS2) $(CCOPTS3) $(COPTS) $[@

.cpp.obj: .AUTODEPEND
    $(CPP) $(SYSDEF) $(DEBUGDEF) $(CCOPTS0) $(CCOPTS1) $(CCOPTS2) $(CCOPTS3) $(CPPOPTS) $[@

.cxx.obj: .AUTODEPEND
    $(CPP) $(SYSDEF) $(DEBUGDEF) $(CCOPTS0) $(CCOPTS1) $(CCOPTS2) $(CCOPTS3) $(CPPOPTS) $[@

#
# Librarian stage
#
.obj.lib:
    $(LIB) $(LIBOPTS) $@ $<

#
# Linking stage. This implicit rule assumes the .exe is created from an object file with the
# same name, plus other object in macro OBJECTS, a number of .libs in macro LIBS etc.
# If the linking fails for some reason, the .lk1 file is not deleted and it can be
# examined.
#
.obj.exe:
    @%create $^*.lk1
    @%append $^*.lk1 F $(ODIR)/$^&
    @for %i in ($(%OBJS)) do @%append $^*.lk1 F $(ODIR)/%i
    @for %i in ($(OBJECTS)) do @%append $^*.lk1 F $(ODIR)/%i
    @for %i in ($(LIBS)) do @%append $^*.lk1 L %i
    @for %i in ($(EXTRA_LIBS)) do @%append $^*.lk1 L %i
    @for %i in ($(SYSLIBS)) do @%append $^*.lk1 L %i
    $(LN) $(LNOPTS) name $^@ op map=$^* @$^*.lk1
    @del $^*.lk1