mirrors/acpica
1
0
Fork 0
mirror of https://github.com/acpica/acpica/ synced 2025-02-22 00:14:18 +03:00
Code Issues Packages Projects Releases Wiki Activity
acpica/CHANGES.txt

1283 lines
48 KiB
Plaintext
Raw Blame History

----------------------------------------
Summary of changes for this label: 11_02_01
1) ACPI CA Core Subsystem:
ACPI 2.0 Support: Implemented ACPI 2.0 64-bit Field access (QWordAcc keyword).
All ACPI 2.0 64-bit support is now implemented.
OSL Interfaces: Several of the OSL (AcpiOs*) interfaces required changes to
support ACPI 2.0 Qword field access. Read/Write PciConfiguration(),
Read/Write Memory(), and Read/Write Port() now accept an ACPI_INTEGER
(64 bits) as the value parameter. Also, the value parameter for the address
space handler interface is now an ACPI_INTEGER. OSL implementations of these
interfaces must now handle the case where the Width parameter is 64.
Index Fields: Fixed a problem where unaligned bit assembly and disassembly for
IndexFields was not supported correctly.
Index and Bank Fields: Nested Index and Bank Fields are now supported.
During field access, a check is performed to ensure that the value written
to an Index or Bank register is not out of the range of the register. The
Index (or Bank) register is written before each access to the field data.
Future support will include allowing individual IndexFields to be wider than
the DataRegister width.
Fields: Fixed a problem where the AML interpreter was incorrectly attempting
to write beyond the end of a Field/OpRegion. This was a boundary case that
occurred when a DWORD field was written to a BYTE access OpRegion, forcing
multiple writes and causing the interpreter to write one datum too many.
Fields: Fixed a problem with Field/OpRegion access where the starting bit
address of a field was incorrectly calculated if the current access type
was wider than a byte (WordAcc, DwordAcc, or QwordAcc).
Fields: Fixed a problem where forward references to individual FieldUnits
(individual Field names within a Field definition) were not resolved during
the AML table load.
Fields: Fixed a problem where forward references from a Field definition to
the parent Operation Region definition were not resolved during the AML
table load.
Fields: Duplicate FieldUnit names within a scope are now detected during AML
table load.
Acpi Interfaces: Fixed a problem where the AcpiGetName() interface returned
an incorrect name for the root node.
Code and Data Size: Code and Data optimizations have permitted new feature
development with an actual reduction in the library size. Current core
subsystem library sizes are shown below. These are the code and data
sizes for the acpica.lib produced by the Microsoft Visual C++ 6.0 compiler,
and these values do not include any ACPI driver or OSPM code. The debug
version of the code includes the debug output trace mechanism and has a
larger code and data size. Note that these values will vary depending on
the efficiency of the compiler and the compiler options used during
generation.
Previous Release (10_18_01):
Non-Debug Version: 63.9K Code, 5.1K Data, 69.0K Total
Debug Version: 136.7K Code, 57.4K Data, 194.2K Total
Current Release:
Non-Debug Version: 63.7K Code, 5.2K Data, 68.9K Total
Debug Version: 134.5K Code, 55.4K Data, 189.9K Total
2) Linux:
Improved /proc processor output (Pavel Machek)
Re-added MODULE_LICENSE("GPL") to all modules.
3) ASL Compiler version X2030:
Duplicate FieldUnit names within a scope are now detected and flagged
as errors.
4) Documentation:
Programmer Reference updated to reflect OSL and address space handler
interface changes described above.
----------------------------------------
Summary of changes for this label: 10_18_01
ACPI CA Core Subsystem:
Fixed a problem with the internal object reference count mechanism that
occasionally caused premature object deletion. This resolves all of the
outstanding problem reports where an object is deleted in the middle of an
interpreter evaluation. Although this problem only showed up in rather
obscure cases, the solution to the problem involved an adjustment of all
reference counts involving objects attached to namespace nodes.
Fixed a problem with Field support in the interpreter where writing to an
aligned field whose length is an exact multiple (2 or greater) of the field
access granularity would cause an attempt to write beyond the end of the
field.
The top level AML opcode execution functions within the interpreter have been
renamed with a more meaningful and consistent naming convention. The modules
exmonad.c and exdyadic.c were eliminated. New modules are exoparg1.c,
exoparg2.c, exoparg3.c, and exoparg6.c.
Support for the ACPI 2.0 "Mid" ASL operator has been implemented.
Fixed a problem where the AML debugger was causing some internal objects to
not be deleted during subsystem termination.
Fixed a problem with the external AcpiEvaluateObject interface where the
subsystem would fault if the named object to be evaluated refered to a
constant such as Zero, Ones, etc.
Fixed a problem with IndexFields and BankFields where the subsystem would
fault if the index, data, or bank registers were not defined in the same
scope as the field itself.
Added printf format string checking for compilers that support this
feature. Corrected more than 50 instances of issues with format specifiers
within invocations of ACPI_DEBUG_PRINT throughout the core subsystem code.
The ASL "Revision" operator now returns the ACPI support level implemented
in the core - the value <20>2<EFBFBD> since the ACPI 2.0 support is more than 50%
implemented.
Enhanced the output of the AML debugger "dump namespace" command to output
in a more human-readable form.
Current core subsystem library code sizes are shown below. These are the
code and data sizes for the acpica.lib produced by the Microsoft Visual
C++ 6.0 compiler, and these values do not include any ACPI driver or
OSPM code. The debug version of the code includes the full debug trace
mechanism -- leading to a much larger code and data size. Note that
these values will vary depending on the efficiency of the compiler and
the compiler options used during generation.
Previous Label (09_20_01):
Non-Debug Version: 65K Code, 5K Data, 70K Total
Debug Version: 138K Code, 58K Data, 196K Total
This Label:
Non-Debug Version: 63.9K Code, 5.1K Data, 69.0K Total
Debug Version: 136.7K Code, 57.4K Data, 194.2K Total
Linux:
Implemented a "Bad BIOS Blacklist" to track machines that have known
ASL/AML problems.
Enhanced the /proc interface for the thermal zone driver and added support
for _HOT (the critical suspend trip point). The 'info' file now includes
threshold/policy information, and allows setting of _SCP (cooling
preference) and _TZP (polling frequency) values to the 'info' file.
Examples: "echo tzp=5 > info" sets the polling frequency to 5 seconds,
and "echo scp=1 > info" sets the cooling preference to the passive/quiet
mode (if supported by the ASL).
Implemented a workaround for a gcc bug that resuted in an OOPs when loading
the control method battery driver.
----------------------------------------
Summary of changes for this label: 09_20_01
ACPI CA Core Subsystem:
The AcpiEnableEvent and AcpiDisableEvent interfaces have been modified to allow
individual GPE levels to be flagged as wake-enabled (i.e., these GPEs are to
remain enabled when the platform sleeps.)
The AcpiEnterSleepState and AcpiLeaveSleepState interfaces now support
wake-enabled GPEs. This means that upon entering the sleep state, all GPEs
that are not wake-enabled are disabled. When leaving the sleep state, these
GPEs are reenabled.
A local double-precision divide/modulo module has been added to enhance
portability to OS kernels where a 64-bit math library is not available. The
new module is <20>utmath.c<>.
Several optimizations have been made to reduce the use of CPU stack.
Originally over 2K, the maximum stack usage is now below 2K at 1860
bytes (1.82k)
Fixed a problem with the AcpiGetFirmwareTable interface where the root table
pointer was not mapped into a logical address properly.
Fixed a problem where a NULL pointer was being dereferenced in the interpreter
code for the ASL Notify operator.
Fixed a problem where the use of the ASL Revision operator returned an error.
This operator now returns the current version of the ACPI CA core subsystem.
Fixed a problem where objects passed as control method parameters to
AcpiEvaluateObject were always deleted at method termination. However, these
objects may end up being stored into the namespace by the called method. The
object reference count mechanism was applied to these objects instead of a
force delete.
Fixed a problem where static strings or buffers (contained in the AML code)
that are declared as package elements within the ASL code could cause a fault
because the interpreter would attempt to delete them. These objects are now
marked with the <20>static object<63> flag to prevent any attempt to delete them.
Implemented an interpreter optimization to use operands directly from the state
object instead of extracting the operands to local variables. This reduces
stack use and code size, and improves performance.
The module exxface.c was eliminated as it was an unnecessary extra layer of
code.
Current core subsystem library code sizes are shown below. These are the code
and data sizes for the acpica.lib produced by the Microsoft Visual C++ 6.0
compiler, and these values do not include any ACPI driver or OSPM code.
The debug version of the code includes the full debug trace mechanism --
leading to a much larger code and data size. Note that these values will
vary depending on the efficiency of the compiler and the compiler options
used during generation.
Non-Debug Version: 65K Code, 5K Data, 70K Total (Previously 69K)
Debug Version: 138K Code, 58K Data, 196K Total (Previously 195K)
Linux:
Support for ACPI 2.0 64-bit integers has been added. All ACPI Integer objects
are now 64 bits wide
All Acpi data types and structures are now in lower case. Only Acpi macros are
upper case for differentiation.
Documentation:
Changes to the external interfaces as described above.
----------------------------------------
Summary of changes for this label: 08_31_01
ACPI CA Core Subsystem:
A bug with interpreter implementation of the ASL Divide operator was found
and fixed. The implicit function return value (not the explicit store
operands) was returning the remainder instead of the quotient. This was a
longstanding bug and it fixes several known outstanding issues on various
platforms.
The ACPI_DEBUG_PRINT and function trace entry/exit macros have been further
optimized for size. There are 700 invocations of the DEBUG_PRINT macro
alone, so each optimization reduces the size of the debug version of the
subsystem significantly.
A stack trace mechanism has been implemented. The maximum stack usage is about
2K on 32-bit platforms. The debugger command "stat stack" will display the
current maximum stack usage.
All public symbols and global variables within the subsystem are now prefixed
with the string "Acpi". This keeps all of the symbols grouped together in a
kernel map, and avoids conflicts with other kernel subsystems.
Most of the internal fixed lookup tables have been moved into the code segment
via the const operator.
Several enhancements have been made to the interpreter to both reduce the code
size and improve performance.
Current core subsystem library code sizes are shown below. These are the code
and data sizes for the acpica.lib produced by the Microsoft Visual C++ 6.0
compiler, and these values do not include any ACPI driver or OSPM code.
The debug version of the code includes the full debug trace mechanism which
contains over 700 invocations of the DEBUG_PRINT macro, 500 function entry
macro invocations, and over 900 function exit macro invocations -- leading
to a much larger code and data size. Note that these values will vary
depending on the efficiency of the compiler and the compiler options used
during generation.
Non-Debug Version: 64K Code, 5K Data, 69K Total
Debug Version: 137K Code, 58K Data, 195K Total
Linux:
Implemented wbinvd() macro, pending a kernel-wide definition.
Fixed /proc/acpi/event to handle poll() and short reads.
ASL Compiler, version X2026:
Fixed a problem introduced in the previous label where the AML code emitted
for package objects produced packages with zero length.
----------------------------------------
Summary of changes for this label: 08_16_01
ACPI CA Core Subsystem:
The following ACPI 2.0 ASL operators have been implemented in the AML
interpreter (These are already supported by the Intel ASL compiler):
ToDecimalString, ToHexString, ToString, ToInteger, and ToBuffer.
Support for 64-bit AML constants is implemented in the AML parser, debugger,
and disassembler.
The internal memory tracking mechanism (leak detection code) has been upgraded
to reduce the memory overhead (a separate tracking block is no longer allocated
for each memory allocation), and now supports all of the internal object
caches.
The data structures and code for the internal object caches have been coelesced
and optimized so that there is a single cache and memory list data structure
and a single group of functions that implement generic cache management.
This has reduced the code size in both the debug and release versions of the
subsystem.
The DEBUG_PRINT macro(s) have been optimized for size and replaced by
ACPI_DEBUG_PRINT. The syntax for this macro is slightly different, because
it generates a single call to an internal function. This results in a savings
of about 90 bytes per invocation, resulting in an overall code and data
savings of about 16% in the debug version of the subsystem.
Linux:
Fixed C3 disk corruption problems and re-enabled C3 on supporting machines.
Integrated low-level sleep code by Patrick Mochel.
Further tweaked source code Linuxization.
Other minor fixes.
ASL Compiler:
Support for ACPI 2.0 variable length packages is fixed/completed.
Fixed a problem where the optional length parameter for the ACPI 2.0
ToString operator.
Fixed multiple extraneous error messages when a syntax error is detected
within the declaration line of a control method.
----------------------------------------
Summary of changes for this label: 07_17_01
ACPI CA Core Subsystem:
Added a new interface named AcpiGetFirmwareTable to obtain any ACPI table via
the ACPI signature. The interface can be called at any time during kernel
initialization, even before the kernel virtual memory manager is initialized
and paging is enabled. This allows kernel subsystems to obtain ACPI tables
very early, even before the ACPI CA subsystem is initialized.
Fixed a problem where Fields defined with the AnyAcc attribute could be
resolved to the incorrect address under the following conditions: 1) the
field width is larger than 8 bits and 2) the parent operation region is not
defined on a DWORD boundary.
Fixed a problem where the interpreter is not being locked during namespace
initialization (during execution of the _INI control methods), causing an
error when an attempt is made to release it later.
ACPI 2.0 support in the AML Interpreter has begun and will be ongoing
throughout the rest of this year. In this label, The Mod operator is
implemented.
Added a new data type to contain full PCI addresses named ACPI_PCI_ID.
This structure contains the PCI Segment, Bus, Device, and Function values.
Linux:
Enhanced the Linux version of the source code to change most capitalized
ACPI type names to lowercase. For example, all instances of ACPI_STATUS are
changed to acpi_status. This will result in a large diff, but the change is
strictly cosmetic and aligns the CA code closer to the Linux coding standard.
OSL Interfaces:
The interfaces to the PCI configuration space have been changed to add the PCI
Segment number and to split the single 32-bit combined DeviceFunction field
into two 16-bit fields. This was accomplished by moving the four values that
define an address in PCI configuration space (segment, bus, device, and
function) to the new ACPI_PCI_ID structure.
The changes to the PCI configuration space interfaces led to a reexamination
of the complete set of address space access interfaces for PCI, I/O, and
Memory. The previously existing 18 interfaces have proven difficult to
maintain (any small change must be propagated across at least 6 interfaces)
and do not easily allow for future expansion to 64 bits if necessary. Also,
on some systems, it would not be appropriate to demultiplex the access
width (8, 16, 32,or 64) before calling the OSL if the corresponding native
OS interfaces contain a similar access width parameter. For these reasons,
the 18 address space interfaces have been replaced by these 6 new ones:
AcpiOsReadPciConfiguration
AcpiOsWritePciConfiguration
AcpiOsReadMemory
AcpiOsWriteMemory
AcpiOsReadPort
AcpiOsWritePort
Added a new interface named AcpiOsGetRootPointer to allow the OSL to perform
the platform and/or OS-specific actions necessary to obtain the ACPI RSDP
table pointer. On IA-32 platforms, this interface will simply call down
to the CA core to perform the low-memory search for the table. On IA-64,
the RSDP is obtained from EFI. Migrating this interface to the OSL allows
the CA core to remain OS and platform independent.
Added a new interface named AcpiOsSignal to provide a generic "function code
and pointer" interface for various miscellaneous signals and notifications
that must be made to the host OS. The first such signals are intended to
support the ASL Fatal and Breakpoint operators. In the latter case, the
AcpiOsBreakpoint interface has been obsoleted.
The definition of the AcpiFormatException interface has been changed to
simplify its use. The caller no longer must supply a buffer to the call;
A pointer to a const string is now returned directly. This allows the
call to be easily used in printf statements, etc. since the caller does
not have to manage a local buffer.
ASL Compiler, Version X2025:
The ACPI 2.0 Switch/Case/Default operators have been implemented and are
fully functional. They will work with all ACPI 1.0 interpreters, since the
operators are simply translated to If/Else pairs.
The ACPI 2.0 ElseIf operator is implemented and will also work with 1.0
interpreters, for the same reason.
Implemented support for ACPI 2.0 variable-length packages. These packages
have a separate opcode, and their size is determined by the interpreter
at run-time.
Documentation
The ACPI CA Programmer Reference has been updated to reflect the new interfaces
and changes to existing interfaces.
------------------------------------------
Summary of changes for this label: 06_15_01
ACPI CA Core Subsystem:
Fixed a problem where a DWORD-accessed field within a Buffer object
would get its byte address inadvertently rounded down to the nearest
DWORD. Buffers are always Byte-accessible.
ASL Compiler, version X2024:
Fixed a problem where the Switch() operator would either fault or hang
the compiler. Note however, that the AML code for this ACPI 2.0 operator
is not yet implemented.
Compiler uses the new AcpiOsGetTimer interface to obtain compile timings.
Implementation of the CreateField operator automatically converts a
reference to a named field within a resource descriptor from a byte offset
to a bit offset if required.
Added some missing named fields from the resource descriptor support.
These are the names that are automatically created by the compiler to
reference fields within a descriptor. They are only valid at compile time
and are not passed through to the AML interpreter.
Resource descriptor named fields are now typed as Integers and subject to
compile-time typechecking when used in expressions.
------------------------------------------
Summary of changes for this label: 05_18_01
ACPI CA Core Subsystem:
Fixed a couple of problems in the Field support code where bits from
adjacent fields could be returned along with the proper field bits.
Restructured the field support code to improve performance, readability
and maintainability.
New DEBUG_PRINTP macro automatically inserts the procedure name into the
output, saving hundreds of copies of procedure name strings within the
source, shrinking the memory footprint of the debug version of the core
subsystem.
Source Code Structure:
The source code directory tree was restructured to reflect the current
organization of the component architecture. Some files and directories
have been moved and/or renamed.
Linux:
Fixed leaking kacpidpc processes.
Fixed queueing event data even when /proc/acpi/event is not opened.
ASL Compiler, version X2020:
Memory allocation performance enhancement - over 24X compile time
improvement on large ASL files. Parse nodes and namestring buffers are
now allocated from a large internal compiler buffer.
The temporary .SRC file is deleted unless the <20>-s<> option is specified
The <20>-d<> debug output option now sends all output to the .DBG file instead
of the console.
<EFBFBD>External<EFBFBD> second parameter is now optional
<EFBFBD>ElseIf<EFBFBD> syntax now properly allows the predicate
Last operand to <20>Load<61> now recognized as a Target operand
Debug object can now be used anywhere as a normal object.
ResourceTemplate now returns an object of type BUFFER
EISAID now returns an object of type INTEGER
<EFBFBD>Index<EFBFBD> now works with a STRING operand
<EFBFBD>LoadTable<EFBFBD> now accepts optional parameters
<EFBFBD>ToString<EFBFBD> length parameter is now optional
<EFBFBD>Interrupt (ResourceType,<2C> parse error fixed.
<EFBFBD>Register<EFBFBD> with a user-defined region space parse error fixed
Escaped backslash at the end of a string (<28>\\<5C>) scan/parse error fixed
<EFBFBD>Revision<EFBFBD> is now an object of type INTEGER.
------------------------------------------
Summary of changes for this label: 05_02_01
Linux:
/proc/acpi/event now blocks properly.
Removed /proc/sys/acpi. You can still dump your DSDT from /proc/acpi/dsdt.
ACPI CA Core Subsystem:
Fixed a problem introduced in the previous label where some of the <20>small<6C>
resource descriptor types were not recognized.
Improved error messages for the case where an ASL Field is outside the range
of the parent operation region.
ASL Compiler, version X2018:
Added error detection for ASL Fields that extend beyond the length of the
parent operation region (only if the length of the region is known at
compile time.) This includes fields that have a minimum access width
that is smaller than the parent region, and individual field units that
are partially or entirely beyond the extent of the parent.
------------------------------------------
Summary of changes for this label: 04_27_01
ACPI CA Core Subsystem:
Fixed a problem where the namespace mutex could be released at the
wrong time during execution of AcpiRemoveAddressSpaceHandler.
Added optional thread ID output for debug traces, to simplify
debugging of multiple threads. Added context switch notification
when the debug code realizes that a different thread is now executing
ACPI code.
Some additional external data types have been prefixed with the string
<EFBFBD>ACPI_<EFBFBD> for consistency. This may effect existing code. The data types
affected are the external callback typedefs - e.g., WALK_CALLBACK becomes
ACPI_WALK_CALLBACK.
Linux:
Fixed an issue with the OSL semaphore implementation where a thread was
waking up with an error from receiving a SIGCHLD signal.
Linux version of ACPI CA now uses the system C library for string
manipulation routines instead of a local implementation.
Cleaned up comments and removed TBDs.
ASL Compiler, version X2017:
Enhanced error detection and reporting for all file I/O operations.
Documentation:
Programmer Reference updated to version 1.06.
------------------------------------------
Summary of changes for this label: 04_13_01
ACPI CA Core Subsystem:
Restructured support for BufferFields and RegionFields. BankFields
support is now fully operational. All known 32-bit limitations on
field sizes have been removed. Both BufferFields and (Operation)
RegionFields are now supported by the same field management code.
Resource support now supports QWORD address and IO resources.
The 16/32/64 bit address structures and the Extended IRQ
structure have been changed to properly handle Source Resource
strings.
A ThreadId of -1 is now used to indicate a <20>mutex not acquired<65>
condition internally and must never be returned by AcpiOsThreadId.
This reserved value was changed from 0 since Unix systems allow a
thread ID of 0.
Linux:
Driver code reorganized to enhance portability
Added a kernel configuration option to control ACPI_DEBUG
Fixed the EC driver to honor _GLK.
ASL Compiler, version X2016:
Fixed support for the <20>FixedHw<48> keyword. Previously, the FixedHw
address space was set to 0, not 0x7f as it should be.
------------------------------------------
Summary of changes for this label: 03_13_01
ACPI CA Core Subsystem:
During ACPI initialization, the _SB_._INI method is now run if present.
Notify handler fix - notifies are deferred until the parent method
completes execution. This fixes the <20>mutex already acquired<65> issue
seen occasionally.
Part of the <20>implicit conversion<6F> rules in ACPI 2.0 have been found to
cause compatibility problems with existing ASL/AML. The convert
<EFBFBD>result-to-target-type<70> implementation has been removed for stores
to method Args and Locals. Source operand conversion is still fully
implemented. Possible changes to ACPI 2.0 specification pending.
Fix to AcpiRsCalculatePciRoutingTableLength to return correct length.
Fix for compiler warnings for 64-bit compiles.
Linux:
/proc output aligned for easier parsing.
Release-version compile problem fixed.
New kernel configuration options documented in Configure.help.
IBM 600E - Fixed Sleep button may generate "Invalid <NULL> context"
message.
OSPM:
Power resource driver integrated with bus manager.
Fixed kernel fault during active cooling for thermal zones.
Source Code:
The source code tree has been restructured.
------------------------------------------
Summary of changes for this label: 03_02_01
Linux OS Services Layer (OSL):
Major revision of all Linux-specific code.
Modularized all ACPI-specific drivers.
Added new thermal zone and power resource drivers.
Revamped /proc interface (new functionality is under /proc/acpi).
New kernel configuration options.
Linux known issues:
New kernel configuration options not documented in Configure.help yet.
Module dependencies not currently implemented. If used, they should be loaded
in this order: busmgr, power, ec, system, processor, battery, ac_adapter,
button, thermal.
Modules will not load if CONFIG_MODVERSION is set.
IBM 600E - entering S5 may reboot instead of shutting down.
IBM 600E - Sleep button may generate "Invalid <NULL> context" message.
Some systems may fail with "execution mutex already acquired" message.
ACPI CA Core Subsystem:
Added a new OSL Interface, AcpiOsGetThreadId. This was required for the
deadlock detection code. Defined to return a non-zero, 32-bit thread ID
for the currently executing thread. May be a non-zero constant integer
on single-thread systems.
Implemented deadlock detection for internal subsystem mutexes. We may add
conditional compilation for this code (debug only) later.
ASL/AML Mutex object semantics are now fully supported. This includes
multiple acquires/releases by owner and support for the Mutex SyncLevel parameter.
A new <20>Force Release<73> mechanism automatically frees all ASL Mutexes that have
been acquired but not released when a thread exits the interpreter. This
forces conformance to the ACPI spec (<28>All mutexes must be released when an
invocation exits<74>) and prevents deadlocked ASL threads. This mechanism can
be expanded (later) to monitor other resource acquisitions if OEM ASL code
continues to misbehave (which it will).
Several new ACPI exception codes have been added for the Mutex support.
Recursive method calls are now allowed and supported (the ACPI spec does
in fact allow recursive method calls.) The number of recursive calls is
subject to the restrictions imposed by the SERIALIZED method keyword and
SyncLevel (ACPI 2.0) method parameter.
Implemented support for the SyncLevel parameter for control methods (ACPI
2.0 feature)
Fixed a deadlock problem when multiple threads attempted to use the interpreter.
Fixed a problem where the string length of a String package element was not
always set in a package returned from AcpiEvaluateObject.
Fixed a problem where the length of a String package element was not always
included in the length of the overall package returned from AcpiEvaluateObject.
Added external interfaces (Acpi*) to the ACPI debug memory manager. This
manager keeps a list of all outstanding allocations, and can therefore
detect memory leaks and attempts to free memory blocks more than once.
Useful for code such as the power manager, etc. May not be appropriate
for device drivers. Performance with the debug code enabled is slow.
The ACPI Global Lock is now an optional hardware element.
ASL Compiler Version X2015:
Integrated changes to allow the compiler to be generated on multiple platforms.
Linux makefile added to generate the compiler on Linux
Source Code:
All platform-specific headers have been moved to their own subdirectory,
Include/Platform.
New source file added, Interpreter/ammutex.c
New header file, Include/acstruct.h
Documentation:
The programmer reference has been updated for the following new interfaces:
AcpiOsGetThreadId
AcpiAllocate
AcpiCallocate
AcpiFree
------------------------------------------
Summary of changes for this label: 02_08_01
Core ACPI CA Subsystem:
Fixed a problem where an error was incorrectly returned if the return
resource buffer was larger than the actual data (in the resource interfaces).
References to named objects within packages are resolved to the full pathname
string before packages are returned directly (via the AcpiEvaluateObject
interface) or indirectly via the resource interfaces.
Linux OS Services Layer (OSL):
Improved /proc battery interface.
Added C-state debugging output and other miscellaneous fixes.
ASL Compiler Version X2014:
All defined method arguments can now be used as local variables, including the
ones that are not actually passed in as parameters. The compiler tracks
initialization of the arguments and issues an exception if they are used
without prior assignment (just like locals).
The -o option now specifies a filename prefix that is used for all output files,
including the AML output file. Otherwise, the default behavior is as follows:
1) the AML goes to the file specified in the DSDT. 2) all other output files
use the input source filename as the base.
------------------------------------------
Summary of changes for this label: 01_25_01
Core ACPI CA Subsystem:
Restructured the implementation of object store support within the
interpreter. This includes support for the Store operator as well
as any ASL operators that include a target operand.
Partially implemented support for Implicit Result-to-Target conversion.
This is when a result object is converted on the fly to the type of
an existing target object. Completion of this support is pending
further analysis of the ACPI specification concerning this matter.
CPU-specific code has been removed from the subsystem (hardware directory).
New Power Management Timer functions added
Linux OS Services Layer (OSL):
Moved system state transition code to the core, fixed it, and modified
Linux OSL accordingly.
Fixed C2 and C3 latency calculations.
We no longer use the compilation date for the version message on
initialization, but retrieve the version from AcpiGetSystemInfo().
Incorporated for fix Sony VAIO machines.
Documentation:
The Programmer Reference has been updated and reformatted.
ASL Compiler:
Version X2013:
Fixed a problem where the line numbering and error reporting could get out
of sync in the presence of multiple include files.
------------------------------------------
Summary of changes for this label: 01_15_01
Core ACPI CA Subsystem:
Implemented support for type conversions in the execution of the ASL
Concatenate operator (The second operand is converted to match the type
of the first operand before concatenation.)
Support for implicit source operand conversion is partially implemented.
The ASL source operand types Integer, Buffer, and String are freely
interchangeable for most ASL operators and are converted by the interpreter
on the fly as required. Implicit Target operand conversion (where the
result is converted to the target type before storing) is not yet implemented.
Support for 32-bit and 64-bit BCD integers is implemented.
Problem fixed where a field read on an aligned field could cause a read
past the end of the field.
New exception, AE_AML_NO_RETURN_VALUE, is returned when a method does not
return a value, but the caller expects one. (The ASL compiler flags
this as a warning.)
ASL Compiler:
Version X2011:
1. Static typechecking of all operands is implemented. This prevents the
use of invalid objects (such as using a Package where an Integer is
required) at compile time instead of at interpreter run-time.
2. The ASL source line is printed with ALL errors and warnings.
3. Bug fix for source EOF without final linefeed.
4. Debug option is split into a parse trace and a namespace trace.
5. Namespace output option (-n) includes initial values for integers
and strings.
6. Parse-only option added for quick syntax checking.
7. Compiler checks for duplicate ACPI name declarations
Version X2012:
1. Relaxed typechecking to allow interchangeability between strings,
integers, and buffers. These types are now converted by the
interpreter at runtime.
2. Compiler reports time taken by each internal subsystem in the debug
output file.
------------------------------------------
Summary of changes for this label: 12_14_00
ASL Compiler:
This is the first official release of the compiler. Since the compiler
requires elements of the Core Subsystem, this label synchronizes
everything.
------------------------------------------
Summary of changes for this label: 12_08_00
Fixed a problem where named references within the ASL definition of both
OperationRegions and CreateXXXFields did not work properly. The symptom
was an AE_AML_OPERAND_TYPE during initialization of the region/field.
This is similar (but not related internally) to the problem that was
fixed in the last label.
Implemented both 32-bit and 64-bit support for the BCD ASL functions
ToBCD and FromBCD.
Updated all legal headers to include <20>2000<30> in the copyright years.
------------------------------------------
Summary of changes for this label: 12_01_00
Fixed a problem where method invocations within the ASL definition of
both OperationRegions and CreateXXXFields did not work properly. The
symptom was an AE_AML_OPERAND_TYPE during initialization of the
region/field:
nsinit-0209: AE_AML_OPERAND_TYPE while getting region arguments [DEBG]
ammonad-0284: Exec_monadic2_r/Not: bad operand(s) (0x3005)
Fixed a problem where operators with more than one nested subexpression
would fail. The symptoms were varied, by mostly AE_AML_OPERAND_TYPE
errors. This was actually a rather serious problem that has gone
unnoticed until now.
Subtract (Add (1,2), Multiply (3,4))
Fixed a problem where AcpiGetHandle didn<64>t quite get fixed in the previous
build (The prefix part of a relative path was handled incorrectly).
Fixed a problem where Operation Region initialization failed if the
operation region name was a <20>namepath<74> instead of a simple <20>nameseg<65>.
Symptom was an AE_NO_OPERAND error.
Fixed a problem where an assignment to a local variable via the indirect
RefOf mechanism only worked for the first such assignment. Subsequent
assignments were ignored.
------------------------------------------
Summary of changes for this label: 11_15_00
ACPI 2.0 table support with backwards support for ACPI 1.0 and the 0.71
extensions. Note: although we can read ACPI 2.0 BIOS tables, the AML
interpreter does NOT have support for the new 2.0 ASL grammar terms
at this time.
All ACPI hardware access is via the GAS structures in the ACPI 2.0 FADT.
All physical memory addresses across all platforms are now 64 bits wide.
Logical address width remains dependent on the platform (i.e., <20>void *<2A>).
AcpiOsMapMemory interface changed to a 64-bit physical address.
The AML interpreter integer size is now 64 bits, as per the ACPI 2.0
specification.
For backwards compatibility with ACPI 1.0, ACPI tables with a revision number
less than 2 use 32-bit integers only.
Fixed a problem where the evaluation of OpRegion operands did not always
resolve them to numbers properly.
------------------------------------------
Summary of changes for this label: 10_20_00
Fix for CBN_._STA issue. This fix will allow correct access to CBN_ OpRegions
when the _STA returns 0x8.
Support to convert ACPI constants (Ones, Zeros, One) to actual values before
a package object is returned
Fix for method call as predicate to if/while construct causing incorrect
if/while behavior
Fix for Else block package lengths sometimes calculated wrong (if block > 63 bytes)
Fix for Processor object length field, was always zero
Table load abort if FACP sanity check fails
Fix for problem with Scope(name) if name already exists
Warning emitted if a named object referenced cannot be found (resolved)
during method execution.
------------------------------------------
Summary of changes for this label: 9_29_00
New table initialization interfaces:
AcpiInitializeSubsystem no longer has any parameters
AcpiFindRootPointer - Find the RSDP (if necessary)
AcpiLoadTables (RSDP) - load all tables found at RSDP->RSDT
Obsolete Interfaces
AcpiLoadFirmwareTables - replaced by AcpiLoadTables
Note: These interface changes require changes to all existing OSDs
The PCI_Config default address space handler is always installed at the root
namespace object.
-------------------------------------------
Summary of changes for this label: 09_15_00
The new initialization architecture is implemented. New interfaces are:
AcpiInitializeSubsystem (replaces AcpiInitialize)
AcpiEnableSubsystem
Obsolete Interfaces:
AcpiLoadNamespace (Namespace is automatically loaded when a table is loaded)
The ACPI_OPERAND_OBJECT has been optimized to shrink its size from 52 bytes
to 32 bytes. There is usually one of these for every namespace object, so
the memory savings is significant.
Implemented just-in-time evaluation of the CreateField operators.
Bug fixes for IA-64 support have been integrated.
Additional code review comments have been implemented
The so-called <20>third pass parse<73> has been replaced by a final walk through the
namespace to initialize all operation regions (address spaces) and fields that
have not yet been initialized during the execution of the various _INI and REG
methods.
New file - namespace/nsinit.c
-------------------------------------------
Summary of changes for this label: 09_01_00
Namespace manager data structures have been reworked to change the primary
object from a table to a single object. This has resulted in dynamic memory
savings of 3X within the namespace and 2X overall in the ACPI CA subsystem.
Fixed problem where the call to AcpiEvFindPciRootBuses was inadvertently left
commented out.
Reduced the warning count when generating the source with the GCC compiler.
Revision numbers added to each module header showing the SourceSafe version
of the file. Please refer to this version number when giving us feedback
or comments on individual modules.
The main object types within the subsystem have been renamed to clarify their
purpose:
ACPI_INTERNAL_OBJECT -> ACPI_OPERAND_OBJECT
ACPI_GENERIC_OP -> ACPI_PARSE_OBJECT
ACPI_NAME_TABLE_ENTRY -> ACPI_NAMESPACE_NODE
NOTE: no changes to the initialization sequence are included in this label.
-------------------------------------------
Summary of changes for this label: 08_23_00
Fixed problem where TerminateControlMethod was being called multiple times per
method
Fixed debugger problem where single stepping caused a semaphore to be
oversignalled
Improved performance through additional parse object caching - added
ACPI_EXTENDED_OP type
-------------------------------------------
Summary of changes for this label: 08_10_00
Parser/Interpreter integration: Eliminated the creation of complete parse trees
for ACPI tables and control methods. Instead, parse subtrees are created and
then deleted as soon as they are processed (Either entered into the namespace or
executed by the interpreter). This reduces the use of dynamic kernel memory
significantly. (about 10X)
Exception codes broken into classes and renumbered. Be sure to recompile all
code that includes acexcep.h. Hopefully we won't have to renumber the codes
again now that they are split into classes (environment, programmer, AML code,
ACPI table, and internal).
Fixed some additional alignment issues in the Resource Manager subcomponent
Implemented semaphore tracking in the AcpiExec utility, and fixed several places
where mutexes/semaphores were being unlocked without a corresponding lock
operation. There are no known semaphore or mutex "leaks" at this time.
Fixed the case where an ASL Return operator is used to return an unnamed
package.
-------------------------------------------
Summary of changes for this label: 07_28_00
Fixed a problem with the way addresses were calculated in AcpiAmlReadFieldData()
and AcpiAmlWriteFieldData(). This problem manifested itself when a Field was
created with WordAccess or DwordAccess, but the field unit defined within the
Field was less than a Word or Dword.
Fixed a problem in AmlDumpOperands() module's loop to pull operands off of the
operand stack to display information. The problem manifested itself as a TLB
error on 64-bit systems when accessing an operand stack with two or more
operands.
Fixed a problem with the PCI configuration space handlers where context was
getting confused between accesses. This required a change to the generic address
space handler and address space setup definitions. Handlers now get both a
global handler context (this is the one passed in by the user when executing
AcpiInstallAddressSpaceHandler() and a specific region context that is unique to
each region (For example, the _ADR, _SEG and _BBN values associated with a
specific region). The generic function definitions have changed to the
following:
typedef
ACPI_STATUS (*ADDRESS_SPACE_HANDLER) (
UINT32 Function,
UINT32 Address,
UINT32 BitWidth,
UINT32 *Value,
void *HandlerContext, // This used to be void *Context
void *RegionContext); // This is an additional parameter
typedef
ACPI_STATUS (*ADDRESS_SPACE_SETUP) (
ACPI_HANDLE RegionHandle,
UINT32 Function,
void *HandlerContext,
void **RegionContext); // This used to be **ReturnContext
-------------------------------------------
Summary of changes for this label: 07_21_00
Major file consolidation and rename. All files within the interpreter have been
renamed as well as most header files. This was done to prevent collisions with
existing files in the host OSs -- filenames such as "config.h" and "global.h"
seem to be quite common. The VC project files have been updated. All makefiles
will require modification.
The parser/interpreter integration continues in Phase 5 with the implementation
of a complete 2-pass parse (the AML is parsed twice) for each table; This
avoids the construction of a huge parse tree and therefore reduces the amount of
dynamic memory required by the subsystem. Greater use of the parse object cache
means that performance is unaffected.
Many comments from the two code reviews have been rolled in.
The 64-bit alignment support is complete.
-------------------------------------------
Summary of changes for this label: 06_30_00
With a nod and a tip of the hat to the technology of yesteryear, we've added
support in the source code for 80 column output devices. The code is now mostly
constrained to 80 columns or less to support environments and editors that 1)
cannot display or print more than 80 characters on a single line, and 2) cannot
disable line wrapping.
A major restructuring of the namespace data structure has been completed. The
result is 1) cleaner and more understandable/maintainable code, and 2) a
significant reduction in the dynamic memory requirement for each named ACPI
object (almost half).
-------------------------------------------
Summary of changes for this label: 06_23_00
Linux support has been added. In order to obtain approval to get the ACPI CA
subsystem into the Linux kernel, we've had to make quite a few changes to the
base subsystem that will affect all users (all the changes are generic and OS-
independent). The effects of these global changes have been somewhat far
reaching. Files have been merged and/or renamed and interfaces have been
renamed. The major changes are described below.
Osd* interfaces renamed to AcpiOs* to eliminate namespace pollution/confusion
within our target kernels. All OSD interfaces must be modified to match the new
naming convention.
Files merged across the subsystem. A number of the smaller source and header
files have been merged to reduce the file count and increase the density of the
existing files. There are too many to list here. In general, makefiles that
call out individual files will require rebuilding.
Interpreter files renamed. All interpreter files now have the prefix am*
instead of ie* and is*.
Header files renamed: The acapi.h file is now acpixf.h. The acpiosd.h file is
now acpiosxf.h. We are removing references to the acronym "API" since it is
somewhat windowsy. The new name is "external interface" or xface or xf in the
filenames.j
All manifest constants have been forced to upper case (some were mixed case.)
Also, the string "ACPI_" has been prepended to many (not all) of the constants,
typedefs, and structs.
The globals "DebugLevel" and "DebugLayer" have been renamed "AcpiDbgLevel" and
"AcpiDbgLayer" respectively.
All other globals within the subsystem are now prefixed with "AcpiGbl_"
Internal procedures within the subsystem are now prefixed with "Acpi" (with only
a few exceptions). The original two-letter abbreviation for the subcomponent
remains after "Acpi" - for example, CmCallocate became AcpiCmCallocate.
Added a source code translation/conversion utility. Used to generate the Linux
source code, it can be modified to generate other types of source as well. Can
also be used to cleanup existing source by removing extraneous spaces and blank
lines. Found in tools/acpisrc/*
OsdUnMapMemory was renamed to OsdUnmapMemory and then AcpiOsUnmapMemory. (UnMap
became Unmap).
A "MaxUnits" parameter has been added to AcpiOsCreateSemaphore. When set to
one, this indicates that the caller wants to use the semaphore as a mutex, not a
counting semaphore. ACPI CA uses both types. However, implementers of this
call may want to use different OS primitives depending on the type of semaphore
requested. For example, some operating systems provide separate "mutex" and
"semaphore" interfaces - where the mutex interface is much faster because it
doesn't have all the overhead of a full semaphore implementation.
Fixed a deadlock problem where a method that accesses the PCI address space can
block forever if it is the first access to the space.
-------------------------------------------
Summary of changes for this label: 06_02_00
Support for environments that cannot handle unaligned data accesses (e.g.
firmware and OS environments devoid of alignment handler technology namely
SAL/EFI and the IA-64 Linux kernel) has been added (via configurable macros) in
these three areas:
- Transfer of data from the raw AML byte stream is done via byte moves instead of
word/dword/qword moves.
- External objects are aligned within the user buffer, including package
elements (sub-objects).
- Conversion of name strings to UINT32 Acpi Names is now done byte-wise.
The Store operator was modified to mimic Microsoft's implementation when storing
to a Buffer Field.
Added a check of the BM_STS bit before entering C3.
The methods subdirectory has been obsoleted and removed. A new file, cmeval.c
subsumes the functionality.
A 16-bit (DOS) version of AcpiExec has been developed. The makefile is under
the acpiexec directory.
Reference in New Issue View Git Blame Copy Permalink