FreeRDP/winpr/libwinpr/crt/utf.c

884 lines
21 KiB
C

/*
* Copyright 2001-2004 Unicode, Inc.
*
* Disclaimer
*
* This source code is provided as is by Unicode, Inc. No claims are
* made as to fitness for any particular purpose. No warranties of any
* kind are expressed or implied. The recipient agrees to determine
* applicability of information provided. If this file has been
* purchased on magnetic or optical media from Unicode, Inc., the
* sole remedy for any claim will be exchange of defective media
* within 90 days of receipt.
*
* Limitations on Rights to Redistribute This Code
*
* Unicode, Inc. hereby grants the right to freely use the information
* supplied in this file in the creation of products supporting the
* Unicode Standard, and to make copies of this file in any form
* for internal or external distribution as long as this notice
* remains attached.
*/
/* ---------------------------------------------------------------------
Conversions between UTF32, UTF-16, and UTF-8. Source code file.
Author: Mark E. Davis, 1994.
Rev History: Rick McGowan, fixes & updates May 2001.
Sept 2001: fixed const & error conditions per
mods suggested by S. Parent & A. Lillich.
June 2002: Tim Dodd added detection and handling of incomplete
source sequences, enhanced error detection, added casts
to eliminate compiler warnings.
July 2003: slight mods to back out aggressive FFFE detection.
Jan 2004: updated switches in from-UTF8 conversions.
Oct 2004: updated to use UNI_MAX_LEGAL_UTF32 in UTF-32 conversions.
See the header file "utf.h" for complete documentation.
------------------------------------------------------------------------ */
#include "utf.h"
#include <winpr/endian.h>
#if __GNUC__
#pragma GCC diagnostic push
#pragma GCC diagnostic ignored "-Wimplicit-fallthrough"
#endif
static const int halfShift = 10; /* used for shifting by 10 bits */
static const DWORD halfBase = 0x0010000UL;
static const DWORD halfMask = 0x3FFUL;
#define UNI_SUR_HIGH_START (DWORD)0xD800
#define UNI_SUR_HIGH_END (DWORD)0xDBFF
#define UNI_SUR_LOW_START (DWORD)0xDC00
#define UNI_SUR_LOW_END (DWORD)0xDFFF
/* --------------------------------------------------------------------- */
ConversionResult ConvertUTF32toUTF16(const DWORD** sourceStart, const DWORD* sourceEnd,
WCHAR** targetStart, WCHAR* targetEnd, ConversionFlags flags)
{
ConversionResult result = conversionOK;
const DWORD* source = *sourceStart;
WCHAR* target = *targetStart;
while (source < sourceEnd)
{
DWORD ch;
if (target >= targetEnd)
{
result = targetExhausted;
break;
}
ch = *source++;
if (ch <= UNI_MAX_BMP) /* Target is a character <= 0xFFFF */
{
/* UTF-16 surrogate values are illegal in UTF-32; 0xffff or 0xfffe are both reserved
* values */
if (ch >= UNI_SUR_HIGH_START && ch <= UNI_SUR_LOW_END)
{
if (flags == strictConversion)
{
--source; /* return to the illegal value itself */
result = sourceIllegal;
break;
}
else
{
*target++ = UNI_REPLACEMENT_CHAR;
}
}
else
{
*target++ = (WCHAR)ch; /* normal case */
}
}
else if (ch > UNI_MAX_LEGAL_UTF32)
{
if (flags == strictConversion)
{
result = sourceIllegal;
}
else
{
*target++ = UNI_REPLACEMENT_CHAR;
}
}
else
{
/* target is a character in range 0xFFFF - 0x10FFFF. */
if (target + 1 >= targetEnd)
{
--source; /* Back up source pointer! */
result = targetExhausted;
break;
}
ch -= halfBase;
*target++ = (WCHAR)((ch >> halfShift) + UNI_SUR_HIGH_START);
*target++ = (WCHAR)((ch & halfMask) + UNI_SUR_LOW_START);
}
}
*sourceStart = source;
*targetStart = target;
return result;
}
/* --------------------------------------------------------------------- */
ConversionResult ConvertUTF16toUTF32(const WCHAR** sourceStart, const WCHAR* sourceEnd,
DWORD** targetStart, DWORD* targetEnd, ConversionFlags flags)
{
ConversionResult result = conversionOK;
const WCHAR* source = *sourceStart;
DWORD* target = *targetStart;
DWORD ch, ch2;
while (source < sourceEnd)
{
const WCHAR* oldSource =
source; /* In case we have to back up because of target overflow. */
ch = *source++;
/* If we have a surrogate pair, convert to UTF32 first. */
if (ch >= UNI_SUR_HIGH_START && ch <= UNI_SUR_HIGH_END)
{
/* If the 16 bits following the high surrogate are in the source buffer... */
if (source < sourceEnd)
{
ch2 = *source;
/* If it's a low surrogate, convert to UTF32. */
if (ch2 >= UNI_SUR_LOW_START && ch2 <= UNI_SUR_LOW_END)
{
ch = ((ch - UNI_SUR_HIGH_START) << halfShift) + (ch2 - UNI_SUR_LOW_START) +
halfBase;
++source;
}
else if (flags == strictConversion) /* it's an unpaired high surrogate */
{
--source; /* return to the illegal value itself */
result = sourceIllegal;
break;
}
}
else /* We don't have the 16 bits following the high surrogate. */
{
--source; /* return to the high surrogate */
result = sourceExhausted;
break;
}
}
else if (flags == strictConversion)
{
/* UTF-16 surrogate values are illegal in UTF-32 */
if (ch >= UNI_SUR_LOW_START && ch <= UNI_SUR_LOW_END)
{
--source; /* return to the illegal value itself */
result = sourceIllegal;
break;
}
}
if (target >= targetEnd)
{
source = oldSource; /* Back up source pointer! */
result = targetExhausted;
break;
}
*target++ = ch;
}
*sourceStart = source;
*targetStart = target;
#ifdef CVTUTF_DEBUG
if (result == sourceIllegal)
{
WLOG_WARN(TAG, "ConvertUTF16toUTF32 illegal seq 0x%04x,%04x", ch, ch2);
}
#endif
return result;
}
/* --------------------------------------------------------------------- */
/*
* Index into the table below with the first byte of a UTF-8 sequence to
* get the number of trailing bytes that are supposed to follow it.
* Note that *legal* UTF-8 values can't have 4 or 5-bytes. The table is
* left as-is for anyone who may want to do such conversion, which was
* allowed in earlier algorithms.
*/
static const char trailingBytesForUTF8[256] = {
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5
};
/*
* Magic values subtracted from a buffer value during UTF8 conversion.
* This table contains as many values as there might be trailing bytes
* in a UTF-8 sequence.
*/
static const DWORD offsetsFromUTF8[6] = { 0x00000000UL, 0x00003080UL, 0x000E2080UL,
0x03C82080UL, 0xFA082080UL, 0x82082080UL };
/*
* Once the bits are split out into bytes of UTF-8, this is a mask OR-ed
* into the first byte, depending on how many bytes follow. There are
* as many entries in this table as there are UTF-8 sequence types.
* (I.e., one byte sequence, two byte... etc.). Remember that sequencs
* for *legal* UTF-8 will be 4 or fewer bytes total.
*/
static const BYTE firstByteMark[7] = { 0x00, 0x00, 0xC0, 0xE0, 0xF0, 0xF8, 0xFC };
/* --------------------------------------------------------------------- */
/* The interface converts a whole buffer to avoid function-call overhead.
* Constants have been gathered. Loops & conditionals have been removed as
* much as possible for efficiency, in favor of drop-through switches.
* (See "Note A" at the bottom of the file for equivalent code.)
* If your compiler supports it, the "isLegalUTF8" call can be turned
* into an inline function.
*/
/* --------------------------------------------------------------------- */
ConversionResult ConvertUTF16toUTF8(const WCHAR** sourceStart, const WCHAR* sourceEnd,
BYTE** targetStart, BYTE* te, ConversionFlags flags)
{
size_t pos = 0;
size_t end = 0;
const WCHAR* source;
const BOOL computeLength = (!te) ? TRUE : FALSE;
ConversionResult result = conversionOK;
if (targetStart && te)
{
const size_t s = (size_t)*targetStart;
const size_t e = (size_t)te;
if (s > e)
return sourceIllegal;
end = e - s;
}
source = *sourceStart;
while (source < sourceEnd)
{
DWORD ch;
unsigned short bytesToWrite = 0;
const DWORD byteMask = 0xBF;
const DWORD byteMark = 0x80;
const WCHAR* oldSource =
source; /* In case we have to back up because of target overflow. */
Data_Read_UINT16(source, ch);
source++;
/* If we have a surrogate pair, convert to UTF32 first. */
if (ch >= UNI_SUR_HIGH_START && ch <= UNI_SUR_HIGH_END)
{
/* If the 16 bits following the high surrogate are in the source buffer... */
if (source < sourceEnd)
{
DWORD ch2;
Data_Read_UINT16(source, ch2);
/* If it's a low surrogate, convert to UTF32. */
if (ch2 >= UNI_SUR_LOW_START && ch2 <= UNI_SUR_LOW_END)
{
ch = ((ch - UNI_SUR_HIGH_START) << halfShift) + (ch2 - UNI_SUR_LOW_START) +
halfBase;
++source;
}
else if (flags == strictConversion)
{
/* it's an unpaired high surrogate */
--source; /* return to the illegal value itself */
result = sourceIllegal;
break;
}
}
else
{
/* We don't have the 16 bits following the high surrogate. */
--source; /* return to the high surrogate */
result = sourceExhausted;
break;
}
}
else if (flags == strictConversion)
{
/* UTF-16 surrogate values are illegal in UTF-32 */
if (ch >= UNI_SUR_LOW_START && ch <= UNI_SUR_LOW_END)
{
--source; /* return to the illegal value itself */
result = sourceIllegal;
break;
}
}
/* Figure out how many bytes the result will require */
if (ch < (DWORD)0x80)
{
bytesToWrite = 1;
}
else if (ch < (DWORD)0x800)
{
bytesToWrite = 2;
}
else if (ch < (DWORD)0x10000)
{
bytesToWrite = 3;
}
else if (ch < (DWORD)0x110000)
{
bytesToWrite = 4;
}
else
{
bytesToWrite = 3;
ch = UNI_REPLACEMENT_CHAR;
}
pos += bytesToWrite;
if ((pos > end) && (!computeLength))
{
source = oldSource; /* Back up source pointer! */
pos -= bytesToWrite;
result = targetExhausted;
break;
}
if (!computeLength)
{
switch (bytesToWrite)
{
/* note: everything falls through. */
case 4:
(*targetStart)[--pos] = (BYTE)((ch | byteMark) & byteMask);
ch >>= 6;
case 3:
(*targetStart)[--pos] = (BYTE)((ch | byteMark) & byteMask);
ch >>= 6;
case 2:
(*targetStart)[--pos] = (BYTE)((ch | byteMark) & byteMask);
ch >>= 6;
case 1:
(*targetStart)[--pos] = (BYTE)(ch | firstByteMark[bytesToWrite]);
}
}
else
{
switch (bytesToWrite)
{
/* note: everything falls through. */
case 4:
--pos;
case 3:
--pos;
case 2:
--pos;
case 1:
--pos;
}
}
pos += bytesToWrite;
}
*sourceStart = source;
if (targetStart && *targetStart)
*targetStart = &(*targetStart)[pos];
else if (targetStart)
*targetStart = (BYTE*)pos;
return result;
}
/* --------------------------------------------------------------------- */
/*
* Utility routine to tell whether a sequence of bytes is legal UTF-8.
* This must be called with the length pre-determined by the first byte.
* If not calling this from ConvertUTF8to*, then the length can be set by:
* length = trailingBytesForUTF8[*source]+1;
* and the sequence is illegal right away if there aren't that many bytes
* available.
* If presented with a length > 4, this returns FALSE. The Unicode
* definition of UTF-8 goes up to 4-byte sequences.
*/
static BOOL isLegalUTF8(const BYTE* source, int length)
{
BYTE a;
const BYTE* srcptr = source + length;
switch (length)
{
default:
return FALSE;
/* Everything else falls through when "TRUE"... */
case 4:
if ((a = (*--srcptr)) < 0x80 || a > 0xBF)
return FALSE;
case 3:
if ((a = (*--srcptr)) < 0x80 || a > 0xBF)
return FALSE;
case 2:
if ((a = (*--srcptr)) > 0xBF)
return FALSE;
switch (*source)
{
/* no fall-through in this inner switch */
case 0xE0:
if (a < 0xA0)
return FALSE;
break;
case 0xED:
if (a > 0x9F)
return FALSE;
break;
case 0xF0:
if (a < 0x90)
return FALSE;
break;
case 0xF4:
if (a > 0x8F)
return FALSE;
break;
default:
if (a < 0x80)
return FALSE;
}
case 1:
if (*source >= 0x80 && *source < 0xC2)
return FALSE;
}
if (*source > 0xF4)
return FALSE;
return TRUE;
}
/* --------------------------------------------------------------------- */
/*
* Exported function to return whether a UTF-8 sequence is legal or not.
* This is not used here; it's just exported.
*/
BOOL isLegalUTF8Sequence(const BYTE* source, const BYTE* sourceEnd)
{
int length = trailingBytesForUTF8[*source] + 1;
if (source + length > sourceEnd)
return FALSE;
return isLegalUTF8(source, length);
}
/* --------------------------------------------------------------------- */
ConversionResult ConvertUTF8toUTF16(const BYTE** sourceStart, const BYTE* sourceEnd,
WCHAR** targetStart, WCHAR* targetEnd, ConversionFlags flags)
{
size_t target = 0;
size_t end = 0;
const BYTE* source;
BOOL computeLength;
ConversionResult result;
computeLength = (!targetEnd) ? TRUE : FALSE;
result = conversionOK;
source = *sourceStart;
if (targetStart && targetEnd)
{
const size_t s = (size_t)*targetStart;
const size_t e = (size_t)targetEnd;
if (s > e)
return sourceIllegal;
end = ((size_t)(targetEnd)) - ((size_t)(*targetStart));
}
while (source < sourceEnd)
{
DWORD ch = 0;
unsigned short extraBytesToRead = trailingBytesForUTF8[*source];
if ((source + extraBytesToRead) >= sourceEnd)
{
result = sourceExhausted;
break;
}
/* Do this check whether lenient or strict */
if (!isLegalUTF8(source, extraBytesToRead + 1))
{
result = sourceIllegal;
break;
}
/*
* The cases all fall through. See "Note A" below.
*/
switch (extraBytesToRead)
{
case 5:
ch += *source++;
ch <<= 6; /* remember, illegal UTF-8 */
case 4:
ch += *source++;
ch <<= 6; /* remember, illegal UTF-8 */
case 3:
ch += *source++;
ch <<= 6;
case 2:
ch += *source++;
ch <<= 6;
case 1:
ch += *source++;
ch <<= 6;
case 0:
ch += *source++;
}
ch -= offsetsFromUTF8[extraBytesToRead];
if ((target * sizeof(WCHAR) >= end) && (!computeLength))
{
source -= (extraBytesToRead + 1); /* Back up source pointer! */
result = targetExhausted;
break;
}
if (ch <= UNI_MAX_BMP)
{
/* Target is a character <= 0xFFFF */
/* UTF-16 surrogate values are illegal in UTF-32 */
if (ch >= UNI_SUR_HIGH_START && ch <= UNI_SUR_LOW_END)
{
if (flags == strictConversion)
{
source -= (extraBytesToRead + 1); /* return to the illegal value itself */
result = sourceIllegal;
break;
}
else
{
if (!computeLength)
Data_Write_UINT16(&(*targetStart)[target], UNI_REPLACEMENT_CHAR);
target++;
}
}
else
{
if (!computeLength)
Data_Write_UINT16(&(*targetStart)[target], ch); /* normal case */
target++;
}
}
else if (ch > UNI_MAX_UTF16)
{
if (flags == strictConversion)
{
result = sourceIllegal;
source -= (extraBytesToRead + 1); /* return to the start */
break; /* Bail out; shouldn't continue */
}
else
{
if (!computeLength)
Data_Write_UINT16(&(*targetStart)[target], UNI_REPLACEMENT_CHAR);
target++;
}
}
else
{
/* target is a character in range 0xFFFF - 0x10FFFF. */
if (((target + 1) * sizeof(WCHAR) >= end) && (!computeLength))
{
source -= (extraBytesToRead + 1); /* Back up source pointer! */
result = targetExhausted;
break;
}
ch -= halfBase;
if (!computeLength)
{
WCHAR wchar;
wchar = (WCHAR)((ch >> halfShift) + UNI_SUR_HIGH_START);
Data_Write_UINT16(&(*targetStart)[target++], wchar);
wchar = (WCHAR)((ch & halfMask) + UNI_SUR_LOW_START);
Data_Write_UINT16(&(*targetStart)[target++], wchar);
}
else
{
target++;
target++;
}
}
}
*sourceStart = source;
if (targetStart && (*targetStart))
*targetStart = &(*targetStart)[target];
else if (targetStart)
*targetStart = (WCHAR*)(target * sizeof(WCHAR));
return result;
}
/* --------------------------------------------------------------------- */
ConversionResult ConvertUTF32toUTF8(const DWORD** sourceStart, const DWORD* sourceEnd,
BYTE** targetStart, BYTE* targetEnd, ConversionFlags flags)
{
ConversionResult result = conversionOK;
const DWORD* source = *sourceStart;
BYTE* target = *targetStart;
while (source < sourceEnd)
{
DWORD ch;
unsigned short bytesToWrite = 0;
const DWORD byteMask = 0xBF;
const DWORD byteMark = 0x80;
ch = *source++;
if (flags == strictConversion)
{
/* UTF-16 surrogate values are illegal in UTF-32 */
if (ch >= UNI_SUR_HIGH_START && ch <= UNI_SUR_LOW_END)
{
--source; /* return to the illegal value itself */
result = sourceIllegal;
break;
}
}
/*
* Figure out how many bytes the result will require. Turn any
* illegally large UTF32 things (> Plane 17) into replacement chars.
*/
if (ch < (DWORD)0x80)
{
bytesToWrite = 1;
}
else if (ch < (DWORD)0x800)
{
bytesToWrite = 2;
}
else if (ch < (DWORD)0x10000)
{
bytesToWrite = 3;
}
else if (ch <= UNI_MAX_LEGAL_UTF32)
{
bytesToWrite = 4;
}
else
{
bytesToWrite = 3;
ch = UNI_REPLACEMENT_CHAR;
result = sourceIllegal;
}
target += bytesToWrite;
if (target > targetEnd)
{
--source; /* Back up source pointer! */
target -= bytesToWrite;
result = targetExhausted;
break;
}
switch (bytesToWrite) /* note: everything falls through. */
{
case 4:
*--target = (BYTE)((ch | byteMark) & byteMask);
ch >>= 6;
case 3:
*--target = (BYTE)((ch | byteMark) & byteMask);
ch >>= 6;
case 2:
*--target = (BYTE)((ch | byteMark) & byteMask);
ch >>= 6;
case 1:
*--target = (BYTE)(ch | firstByteMark[bytesToWrite]);
}
target += bytesToWrite;
}
*sourceStart = source;
*targetStart = target;
return result;
}
/* --------------------------------------------------------------------- */
ConversionResult ConvertUTF8toUTF32(const BYTE** sourceStart, const BYTE* sourceEnd,
DWORD** targetStart, DWORD* targetEnd, ConversionFlags flags)
{
ConversionResult result = conversionOK;
const BYTE* source = *sourceStart;
DWORD* target = *targetStart;
while (source < sourceEnd)
{
DWORD ch = 0;
unsigned short extraBytesToRead = trailingBytesForUTF8[*source];
if (source + extraBytesToRead >= sourceEnd)
{
result = sourceExhausted;
break;
}
/* Do this check whether lenient or strict */
if (!isLegalUTF8(source, extraBytesToRead + 1))
{
result = sourceIllegal;
break;
}
/*
* The cases all fall through. See "Note A" below.
*/
switch (extraBytesToRead)
{
case 5:
ch += *source++;
ch <<= 6;
case 4:
ch += *source++;
ch <<= 6;
case 3:
ch += *source++;
ch <<= 6;
case 2:
ch += *source++;
ch <<= 6;
case 1:
ch += *source++;
ch <<= 6;
case 0:
ch += *source++;
}
ch -= offsetsFromUTF8[extraBytesToRead];
if (target >= targetEnd)
{
source -= (extraBytesToRead + 1); /* Back up the source pointer! */
result = targetExhausted;
break;
}
if (ch <= UNI_MAX_LEGAL_UTF32)
{
/*
* UTF-16 surrogate values are illegal in UTF-32, and anything
* over Plane 17 (> 0x10FFFF) is illegal.
*/
if (ch >= UNI_SUR_HIGH_START && ch <= UNI_SUR_LOW_END)
{
if (flags == strictConversion)
{
source -= (extraBytesToRead + 1); /* return to the illegal value itself */
result = sourceIllegal;
break;
}
else
{
*target++ = UNI_REPLACEMENT_CHAR;
}
}
else
{
*target++ = ch;
}
}
else /* i.e., ch > UNI_MAX_LEGAL_UTF32 */
{
result = sourceIllegal;
*target++ = UNI_REPLACEMENT_CHAR;
}
}
*sourceStart = source;
*targetStart = target;
return result;
}
/* ---------------------------------------------------------------------
Note A.
The fall-through switches in UTF-8 reading code save a
temp variable, some decrements & conditionals. The switches
are equivalent to the following loop:
{
int tmpBytesToRead = extraBytesToRead+1;
do {
ch += *source++;
--tmpBytesToRead;
if (tmpBytesToRead) ch <<= 6;
} while (tmpBytesToRead > 0);
}
In UTF-8 writing code, the switches on "bytesToWrite" are
similarly unrolled loops.
--------------------------------------------------------------------- */
#if __GNUC__
#pragma GCC diagnostic pop
#endif