FreeRDP/include/freerdp/error.h
Benoît LeBlanc 3adff0ec60 - added CANCELEDBYUSER error code.
- AUTHENTICATIONERROR error code correclty set on gateway authentication (http error 401)
- Better error handling on connection errors and user cancelation
2013-12-13 10:11:36 -05:00

183 lines
8.0 KiB
C
Executable File

/**
* FreeRDP: A Remote Desktop Protocol Implementation
* Error Codes
*
* Copyright 2012 Marc-Andre Moreau <marcandre.moreau@gmail.com>
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef FREERDP_ERROR_H
#define FREERDP_ERROR_H
#include <winpr/crt.h>
#include <freerdp/api.h>
#ifdef __cplusplus
extern "C" {
#endif
/**
* Error Info Codes (Error Info PDU)
*/
/* Protocol-independent codes */
#define ERRINFO_RPC_INITIATED_DISCONNECT 0x00000001
#define ERRINFO_RPC_INITIATED_LOGOFF 0x00000002
#define ERRINFO_IDLE_TIMEOUT 0x00000003
#define ERRINFO_LOGON_TIMEOUT 0x00000004
#define ERRINFO_DISCONNECTED_BY_OTHER_CONNECTION 0x00000005
#define ERRINFO_OUT_OF_MEMORY 0x00000006
#define ERRINFO_SERVER_DENIED_CONNECTION 0x00000007
#define ERRINFO_SERVER_INSUFFICIENT_PRIVILEGES 0x00000009
#define ERRINFO_SERVER_FRESH_CREDENTIALS_REQUIRED 0x0000000A
#define ERRINFO_RPC_INITIATED_DISCONNECT_BY_USER 0x0000000B
#define ERRINFO_LOGOFF_BY_USER 0x0000000C
/* Protocol-independent codes generated by the Connection Broker */
#define ERRINFO_CB_DESTINATION_NOT_FOUND 0x0000400
#define ERRINFO_CB_LOADING_DESTINATION 0x0000402
#define ERRINFO_CB_REDIRECTING_TO_DESTINATION 0x0000404
#define ERRINFO_CB_SESSION_ONLINE_VM_WAKE 0x0000405
#define ERRINFO_CB_SESSION_ONLINE_VM_BOOT 0x0000406
#define ERRINFO_CB_SESSION_ONLINE_VM_NO_DNS 0x0000407
#define ERRINFO_CB_DESTINATION_POOL_NOT_FREE 0x0000408
#define ERRINFO_CB_CONNECTION_CANCELLED 0x0000409
#define ERRINFO_CB_CONNECTION_ERROR_INVALID_SETTINGS 0x0000410
#define ERRINFO_CB_SESSION_ONLINE_VM_BOOT_TIMEOUT 0x0000411
#define ERRINFO_CB_SESSION_ONLINE_VM_SESSMON_FAILED 0x0000412
/* Protocol-independent licensing codes */
#define ERRINFO_LICENSE_INTERNAL 0x00000100
#define ERRINFO_LICENSE_NO_LICENSE_SERVER 0x00000101
#define ERRINFO_LICENSE_NO_LICENSE 0x00000102
#define ERRINFO_LICENSE_BAD_CLIENT_MSG 0x00000103
#define ERRINFO_LICENSE_HWID_DOESNT_MATCH_LICENSE 0x00000104
#define ERRINFO_LICENSE_BAD_CLIENT_LICENSE 0x00000105
#define ERRINFO_LICENSE_CANT_FINISH_PROTOCOL 0x00000106
#define ERRINFO_LICENSE_CLIENT_ENDED_PROTOCOL 0x00000107
#define ERRINFO_LICENSE_BAD_CLIENT_ENCRYPTION 0x00000108
#define ERRINFO_LICENSE_CANT_UPGRADE_LICENSE 0x00000109
#define ERRINFO_LICENSE_NO_REMOTE_CONNECTIONS 0x0000010A
/* RDP specific codes */
#define ERRINFO_UNKNOWN_DATA_PDU_TYPE 0x000010C9
#define ERRINFO_UNKNOWN_PDU_TYPE 0x000010CA
#define ERRINFO_DATA_PDU_SEQUENCE 0x000010CB
#define ERRINFO_CONTROL_PDU_SEQUENCE 0x000010CD
#define ERRINFO_INVALID_CONTROL_PDU_ACTION 0x000010CE
#define ERRINFO_INVALID_INPUT_PDU_TYPE 0x000010CF
#define ERRINFO_INVALID_INPUT_PDU_MOUSE 0x000010D0
#define ERRINFO_INVALID_REFRESH_RECT_PDU 0x000010D1
#define ERRINFO_CREATE_USER_DATA_FAILED 0x000010D2
#define ERRINFO_CONNECT_FAILED 0x000010D3
#define ERRINFO_CONFIRM_ACTIVE_HAS_WRONG_SHAREID 0x000010D4
#define ERRINFO_CONFIRM_ACTIVE_HAS_WRONG_ORIGINATOR 0x000010D5
#define ERRINFO_PERSISTENT_KEY_PDU_BAD_LENGTH 0x000010DA
#define ERRINFO_PERSISTENT_KEY_PDU_ILLEGAL_FIRST 0x000010DB
#define ERRINFO_PERSISTENT_KEY_PDU_TOO_MANY_TOTAL_KEYS 0x000010DC
#define ERRINFO_PERSISTENT_KEY_PDU_TOO_MANY_CACHE_KEYS 0x000010DD
#define ERRINFO_INPUT_PDU_BAD_LENGTH 0x000010DE
#define ERRINFO_BITMAP_CACHE_ERROR_PDU_BAD_LENGTH 0x000010DF
#define ERRINFO_SECURITY_DATA_TOO_SHORT 0x000010E0
#define ERRINFO_VCHANNEL_DATA_TOO_SHORT 0x000010E1
#define ERRINFO_SHARE_DATA_TOO_SHORT 0x000010E2
#define ERRINFO_BAD_SUPPRESS_OUTPUT_PDU 0x000010E3
#define ERRINFO_CONFIRM_ACTIVE_PDU_TOO_SHORT 0x000010E5
#define ERRINFO_CAPABILITY_SET_TOO_SMALL 0x000010E7
#define ERRINFO_CAPABILITY_SET_TOO_LARGE 0x000010E8
#define ERRINFO_NO_CURSOR_CACHE 0x000010E9
#define ERRINFO_BAD_CAPABILITIES 0x000010EA
#define ERRINFO_VIRTUAL_CHANNEL_DECOMPRESSION 0x000010EC
#define ERRINFO_INVALID_VC_COMPRESSION_TYPE 0x000010ED
#define ERRINFO_INVALID_CHANNEL_ID 0x000010EF
#define ERRINFO_VCHANNELS_TOO_MANY 0x000010F0
#define ERRINFO_REMOTEAPP_NOT_ENABLED 0x000010F3
#define ERRINFO_CACHE_CAP_NOT_SET 0x000010F4
#define ERRINFO_BITMAP_CACHE_ERROR_PDU_BAD_LENGTH2 0x000010F5
#define ERRINFO_OFFSCREEN_CACHE_ERROR_PDU_BAD_LENGTH 0x000010F6
#define ERRINFO_DRAWNINEGRID_CACHE_ERROR_PDU_BAD_LENGTH 0x000010F7
#define ERRINFO_GDIPLUS_PDU_BAD_LENGTH 0x000010F8
#define ERRINFO_SECURITY_DATA_TOO_SHORT2 0x00001111
#define ERRINFO_SECURITY_DATA_TOO_SHORT3 0x00001112
#define ERRINFO_SECURITY_DATA_TOO_SHORT4 0x00001113
#define ERRINFO_SECURITY_DATA_TOO_SHORT5 0x00001114
#define ERRINFO_SECURITY_DATA_TOO_SHORT6 0x00001115
#define ERRINFO_SECURITY_DATA_TOO_SHORT7 0x00001116
#define ERRINFO_SECURITY_DATA_TOO_SHORT8 0x00001117
#define ERRINFO_SECURITY_DATA_TOO_SHORT9 0x00001118
#define ERRINFO_SECURITY_DATA_TOO_SHORT10 0x00001119
#define ERRINFO_SECURITY_DATA_TOO_SHORT11 0x0000111A
#define ERRINFO_SECURITY_DATA_TOO_SHORT12 0x0000111B
#define ERRINFO_SECURITY_DATA_TOO_SHORT13 0x0000111C
#define ERRINFO_SECURITY_DATA_TOO_SHORT14 0x0000111D
#define ERRINFO_SECURITY_DATA_TOO_SHORT15 0x0000111E
#define ERRINFO_SECURITY_DATA_TOO_SHORT16 0x0000111F
#define ERRINFO_SECURITY_DATA_TOO_SHORT17 0x00001120
#define ERRINFO_SECURITY_DATA_TOO_SHORT18 0x00001121
#define ERRINFO_SECURITY_DATA_TOO_SHORT19 0x00001122
#define ERRINFO_SECURITY_DATA_TOO_SHORT20 0x00001123
#define ERRINFO_SECURITY_DATA_TOO_SHORT21 0x00001124
#define ERRINFO_SECURITY_DATA_TOO_SHORT22 0x00001125
#define ERRINFO_SECURITY_DATA_TOO_SHORT23 0x00001126
#define ERRINFO_BAD_MONITOR_DATA 0x00001129
#define ERRINFO_VC_DECOMPRESSED_REASSEMBLE_FAILED 0x0000112A
#define ERRINFO_VC_DATA_TOO_LONG 0x0000112B
#define ERRINFO_GRAPHICS_MODE_NOT_SUPPORTED 0x0000112D
#define ERRINFO_GRAPHICS_SUBSYSTEM_RESET_FAILED 0x0000112E
#define ERRINFO_GRAPHICS_SUBSYSTEM_FAILED 0x0000112F
#define ERRINFO_TIMEZONE_KEY_NAME_LENGTH_TOO_SHORT 0x00001130
#define ERRINFO_TIMEZONE_KEY_NAME_LENGTH_TOO_LONG 0x00001131
#define ERRINFO_DYNAMIC_DST_DISABLED_FIELD_MISSING 0x00001132
#define ERRINFO_VC_DECODING_ERROR 0x00001133
#define ERRINFO_UPDATE_SESSION_KEY_FAILED 0x00001191
#define ERRINFO_DECRYPT_FAILED 0x00001192
#define ERRINFO_ENCRYPT_FAILED 0x00001193
#define ERRINFO_ENCRYPTION_PACKAGE_MISMATCH 0x00001194
#define ERRINFO_DECRYPT_FAILED2 0x00001195
#define ERRINFO_SUCCESS 0x00000000
#define ERRINFO_NONE 0xFFFFFFFF
FREERDP_API const char* freerdp_get_error_info_string(UINT32 code);
FREERDP_API const char* freerdp_get_error_info_name(UINT32 code);
/**
* This static variable holds an error code if the return value from connect is FALSE.
* This variable is always set to 0 in the beginning of the connect sequence.
* The returned code can be used to inform the user of the detailed connect error.
* The value can hold one of the defined error codes below OR an error according to errno
*/
FREERDP_API extern int connectErrorCode;
#define ERRORSTART 10000
#define PREECONNECTERROR ERRORSTART + 1
#define UNDEFINEDCONNECTERROR ERRORSTART + 2
#define POSTCONNECTERROR ERRORSTART + 3
#define DNSERROR ERRORSTART + 4 /* general DNS ERROR */
#define DNSNAMENOTFOUND ERRORSTART + 5 /* EAI_NONAME */
#define CONNECTERROR ERRORSTART + 6 /* a connect error if errno is not define during tcp connect */
#define MCSCONNECTINITIALERROR ERRORSTART + 7
#define TLSCONNECTERROR ERRORSTART + 8
#define AUTHENTICATIONERROR ERRORSTART + 9
#define INSUFFICIENTPRIVILEGESERROR ERRORSTART + 10
#define CANCELEDBYUSER ERRORSTART + 11
#ifdef __cplusplus
}
#endif
#endif /* FREERDP_ERROR_H */