FreeRDP/channels/serial/client/serial_main.c

/**
 * FreeRDP: A Remote Desktop Protocol Implementation
 * Serial Port Device Service Virtual Channel
 *
 * Copyright 2011 O.S. Systems Software Ltda.
 * Copyright 2011 Eduardo Fiss Beloni <beloni@ossystems.com.br>
 * Copyright 2014 Hewlett-Packard Development Company, L.P.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <assert.h>
#include <errno.h>
#include <stdio.h>
#include <stdint.h>
#include <stdlib.h>
#include <string.h>

#include <winpr/collections.h>
#include <winpr/comm.h>
#include <winpr/crt.h>
#include <winpr/stream.h>
#include <winpr/synch.h>
#include <winpr/thread.h>
#include <winpr/wlog.h>

#include <freerdp/freerdp.h>
#include <freerdp/channels/rdpdr.h>
#include <freerdp/channels/log.h>

#define TAG CHANNELS_TAG("serial.client")

/* TODO: all #ifdef __linux__ could be removed once only some generic
 * functions will be used. Replace CommReadFile by ReadFile,
 * CommWriteFile by WriteFile etc..  */
#if defined __linux__ && !defined ANDROID 

#define MAX_IRP_THREADS	5

typedef struct _SERIAL_DEVICE SERIAL_DEVICE;

struct _SERIAL_DEVICE
{
	DEVICE device;
	BOOL permissive;
	SERIAL_DRIVER_ID ServerSerialDriverId;
	HANDLE* hComm;

	wLog* log;
	HANDLE MainThread;
	wMessageQueue* MainIrpQueue;

	/* one thread per pending IRP and indexed according their CompletionId */
	wListDictionary *IrpThreads;
	UINT32 IrpThreadToBeTerminatedCount;
	CRITICAL_SECTION TerminatingIrpThreadsLock;
	rdpContext* rdpcontext;
};

typedef struct _IRP_THREAD_DATA IRP_THREAD_DATA;

struct _IRP_THREAD_DATA
{
	SERIAL_DEVICE *serial;
	IRP *irp;
};

static UINT32 _GetLastErrorToIoStatus(SERIAL_DEVICE* serial)
{
	/* http://msdn.microsoft.com/en-us/library/ff547466%28v=vs.85%29.aspx#generic_status_values_for_serial_device_control_requests */

	switch(GetLastError())
	{
		case ERROR_BAD_DEVICE:
			return STATUS_INVALID_DEVICE_REQUEST;

		case ERROR_CALL_NOT_IMPLEMENTED:
			return STATUS_NOT_IMPLEMENTED;

		case ERROR_CANCELLED:
			return STATUS_CANCELLED;

		case ERROR_INSUFFICIENT_BUFFER:
			return STATUS_BUFFER_TOO_SMALL; /* NB: STATUS_BUFFER_SIZE_TOO_SMALL not defined  */

		case ERROR_INVALID_DEVICE_OBJECT_PARAMETER: /* eg: SerCx2.sys' _purge() */
			return STATUS_INVALID_DEVICE_STATE;

		case ERROR_INVALID_HANDLE:
			return STATUS_INVALID_DEVICE_REQUEST;

		case ERROR_INVALID_PARAMETER:
			return STATUS_INVALID_PARAMETER;

		case ERROR_IO_DEVICE:
			return STATUS_IO_DEVICE_ERROR;

		case ERROR_IO_PENDING:
			return STATUS_PENDING;

		case ERROR_NOT_SUPPORTED:
			return STATUS_NOT_SUPPORTED;

		case ERROR_TIMEOUT:
			return STATUS_TIMEOUT;

		/* no default */
	}

	WLog_Print(serial->log, WLOG_DEBUG, "unexpected last-error: 0x%lx", GetLastError());
	return STATUS_UNSUCCESSFUL;
}

static void serial_process_irp_create(SERIAL_DEVICE* serial, IRP* irp)
{
	DWORD DesiredAccess;
	DWORD SharedAccess;
	DWORD CreateDisposition;
	UINT32 PathLength;

	Stream_Read_UINT32(irp->input, DesiredAccess);		/* DesiredAccess (4 bytes) */
	Stream_Seek_UINT64(irp->input);				/* AllocationSize (8 bytes) */
	Stream_Seek_UINT32(irp->input);				/* FileAttributes (4 bytes) */
	Stream_Read_UINT32(irp->input, SharedAccess);		/* SharedAccess (4 bytes) */
	Stream_Read_UINT32(irp->input, CreateDisposition);	/* CreateDisposition (4 bytes) */
	Stream_Seek_UINT32(irp->input); 			/* CreateOptions (4 bytes) */
	Stream_Read_UINT32(irp->input, PathLength);		/* PathLength (4 bytes) */
	Stream_Seek(irp->input, PathLength);			/* Path (variable) */

	assert(PathLength == 0); /* MS-RDPESP 2.2.2.2 */


#ifndef _WIN32
	/* Windows 2012 server sends on a first call :
	 *     DesiredAccess     = 0x00100080: SYNCHRONIZE | FILE_READ_ATTRIBUTES
	 *     SharedAccess      = 0x00000007: FILE_SHARE_DELETE | FILE_SHARE_WRITE | FILE_SHARE_READ
	 *     CreateDisposition = 0x00000001: CREATE_NEW
	 *
	 * then Windows 2012 sends :
	 *     DesiredAccess     = 0x00120089: SYNCHRONIZE | READ_CONTROL | FILE_READ_ATTRIBUTES | FILE_READ_EA | FILE_READ_DATA
	 *     SharedAccess      = 0x00000007: FILE_SHARE_DELETE | FILE_SHARE_WRITE | FILE_SHARE_READ
	 *     CreateDisposition = 0x00000001: CREATE_NEW
	 *
	 * assert(DesiredAccess == (GENERIC_READ | GENERIC_WRITE));
	 * assert(SharedAccess == 0);
	 * assert(CreateDisposition == OPEN_EXISTING);
	 *
	 */

	WLog_Print(serial->log, WLOG_DEBUG, "DesiredAccess: 0x%lX, SharedAccess: 0x%lX, CreateDisposition: 0x%lX", DesiredAccess, SharedAccess, CreateDisposition);

	/* FIXME: As of today only the flags below are supported by CommCreateFileA: */
	DesiredAccess     = GENERIC_READ | GENERIC_WRITE;
	SharedAccess      = 0;
	CreateDisposition = OPEN_EXISTING;
#endif

	serial->hComm = CreateFile(serial->device.name,
				DesiredAccess,
				SharedAccess,
				NULL,			/* SecurityAttributes */
				CreateDisposition,
				0,			/* FlagsAndAttributes */
				NULL);			/* TemplateFile */

	if (!serial->hComm || (serial->hComm == INVALID_HANDLE_VALUE))
	{
		WLog_Print(serial->log, WLOG_WARN, "CreateFile failure: %s last-error: 0x%lX\n", serial->device.name, GetLastError());

		irp->IoStatus = STATUS_UNSUCCESSFUL;
		goto error_handle;
	}

	_comm_setServerSerialDriver(serial->hComm, serial->ServerSerialDriverId);

	_comm_set_permissive(serial->hComm, serial->permissive);

	/* NOTE: binary mode/raw mode required for the redirection. On
	 * Linux, CommCreateFileA forces this setting.
	 */
	/* ZeroMemory(&dcb, sizeof(DCB)); */
	/* dcb.DCBlength = sizeof(DCB); */
	/* GetCommState(serial->hComm, &dcb); */
	/* dcb.fBinary = TRUE; */
	/* SetCommState(serial->hComm, &dcb); */

	assert(irp->FileId == 0);
	irp->FileId = irp->devman->id_sequence++; /* FIXME: why not ((WINPR_COMM*)hComm)->fd? */

	irp->IoStatus = STATUS_SUCCESS;

	WLog_Print(serial->log, WLOG_DEBUG, "%s (DeviceId: %d, FileId: %d) created.", serial->device.name, irp->device->id, irp->FileId);

  error_handle:
	Stream_Write_UINT32(irp->output, irp->FileId);	/* FileId (4 bytes) */
	Stream_Write_UINT8(irp->output, 0);		/* Information (1 byte) */
}

static void serial_process_irp_close(SERIAL_DEVICE* serial, IRP* irp)
{
	Stream_Seek(irp->input, 32); /* Padding (32 bytes) */

	if (!CloseHandle(serial->hComm))
	{
		WLog_Print(serial->log, WLOG_WARN, "CloseHandle failure: %s (%d) closed.", serial->device.name, irp->device->id);
		irp->IoStatus = STATUS_UNSUCCESSFUL;
		goto error_handle;
	}

	WLog_Print(serial->log, WLOG_DEBUG, "%s (DeviceId: %d, FileId: %d) closed.", serial->device.name, irp->device->id, irp->FileId);

	serial->hComm = NULL;
	irp->IoStatus = STATUS_SUCCESS;

  error_handle:
	Stream_Zero(irp->output, 5); /* Padding (5 bytes) */
}

/**
 * Function description
 *
 * @return 0 on success, otherwise a Win32 error code
 */
static UINT serial_process_irp_read(SERIAL_DEVICE* serial, IRP* irp)
{
	UINT32 Length;
	UINT64 Offset;
	BYTE* buffer = NULL;
	DWORD nbRead = 0;

	Stream_Read_UINT32(irp->input, Length); /* Length (4 bytes) */
	Stream_Read_UINT64(irp->input, Offset); /* Offset (8 bytes) */
	Stream_Seek(irp->input, 20); /* Padding (20 bytes) */


	buffer = (BYTE*)calloc(Length, sizeof(BYTE));
	if (buffer == NULL)
	{
		irp->IoStatus = STATUS_NO_MEMORY;
		goto error_handle;
	}


	/* MS-RDPESP 3.2.5.1.4: If the Offset field is not set to 0, the value MUST be ignored
	 * assert(Offset == 0);
	 */


	WLog_Print(serial->log, WLOG_DEBUG, "reading %d bytes from %s", Length, serial->device.name);

	/* FIXME: CommReadFile to be replaced by ReadFile */
	if (CommReadFile(serial->hComm, buffer, Length, &nbRead, NULL))
	{
		irp->IoStatus = STATUS_SUCCESS;
	}
	else
	{
		WLog_Print(serial->log, WLOG_DEBUG, "read failure to %s, nbRead=%ld, last-error: 0x%lX", serial->device.name, nbRead, GetLastError());

		irp->IoStatus = _GetLastErrorToIoStatus(serial);
	}

	WLog_Print(serial->log, WLOG_DEBUG, "%lu bytes read from %s", nbRead, serial->device.name);

  error_handle:

	Stream_Write_UINT32(irp->output, nbRead); /* Length (4 bytes) */

	if (nbRead > 0)
	{
		if (!Stream_EnsureRemainingCapacity(irp->output, nbRead))
		{
			WLog_ERR(TAG, "Stream_EnsureRemainingCapacity failed!");
			free(buffer);
			return CHANNEL_RC_NO_MEMORY;
		}
		Stream_Write(irp->output, buffer, nbRead); /* ReadData */
	}

	free(buffer);
	return CHANNEL_RC_OK;
}

static void serial_process_irp_write(SERIAL_DEVICE* serial, IRP* irp)
{
	UINT32 Length;
	UINT64 Offset;
	DWORD nbWritten = 0;

	Stream_Read_UINT32(irp->input, Length); /* Length (4 bytes) */
	Stream_Read_UINT64(irp->input, Offset); /* Offset (8 bytes) */
	Stream_Seek(irp->input, 20); /* Padding (20 bytes) */

	/* MS-RDPESP 3.2.5.1.5: The Offset field is ignored
	 * assert(Offset == 0);
	 *
	 * Using a serial printer, noticed though this field could be
	 * set.
	 */

	WLog_Print(serial->log, WLOG_DEBUG, "writing %d bytes to %s", Length, serial->device.name);

	/* FIXME: CommWriteFile to be replaced by WriteFile */
	if (CommWriteFile(serial->hComm, Stream_Pointer(irp->input), Length, &nbWritten, NULL))
	{
		irp->IoStatus = STATUS_SUCCESS;
	}
	else
	{
		WLog_Print(serial->log, WLOG_DEBUG, "write failure to %s, nbWritten=%ld, last-error: 0x%lX", serial->device.name, nbWritten, GetLastError());

		irp->IoStatus = _GetLastErrorToIoStatus(serial);
	}

	WLog_Print(serial->log, WLOG_DEBUG, "%lu bytes written to %s", nbWritten, serial->device.name);

	Stream_Write_UINT32(irp->output, nbWritten); /* Length (4 bytes) */
	Stream_Write_UINT8(irp->output, 0); /* Padding (1 byte) */
}


/**
 * Function description
 *
 * @return 0 on success, otherwise a Win32 error code
 */
static UINT serial_process_irp_device_control(SERIAL_DEVICE* serial, IRP* irp)
{
	UINT32 IoControlCode;
	UINT32 InputBufferLength;
	BYTE*  InputBuffer = NULL;
	UINT32 OutputBufferLength;
	BYTE*  OutputBuffer = NULL;
	DWORD  BytesReturned = 0;

	Stream_Read_UINT32(irp->input, OutputBufferLength); /* OutputBufferLength (4 bytes) */
	Stream_Read_UINT32(irp->input, InputBufferLength); /* InputBufferLength (4 bytes) */
	Stream_Read_UINT32(irp->input, IoControlCode); /* IoControlCode (4 bytes) */
	Stream_Seek(irp->input, 20); /* Padding (20 bytes) */

	OutputBuffer = (BYTE*)calloc(OutputBufferLength, sizeof(BYTE));
	if (OutputBuffer == NULL)
	{
		irp->IoStatus = STATUS_NO_MEMORY;
		goto error_handle;
	}

	InputBuffer = (BYTE*)calloc(InputBufferLength, sizeof(BYTE));
	if (InputBuffer == NULL)
	{
		irp->IoStatus = STATUS_NO_MEMORY;
		goto error_handle;
	}

	Stream_Read(irp->input, InputBuffer, InputBufferLength);

	WLog_Print(serial->log, WLOG_DEBUG, "CommDeviceIoControl: CompletionId=%d, IoControlCode=[0x%X] %s", irp->CompletionId, IoControlCode, _comm_serial_ioctl_name(IoControlCode));

	/* FIXME: CommDeviceIoControl to be replaced by DeviceIoControl() */
	if (CommDeviceIoControl(serial->hComm, IoControlCode, InputBuffer, InputBufferLength, OutputBuffer, OutputBufferLength, &BytesReturned, NULL))
	{
		/* WLog_Print(serial->log, WLOG_DEBUG, "CommDeviceIoControl: CompletionId=%d, IoControlCode=[0x%X] %s done", irp->CompletionId, IoControlCode, _comm_serial_ioctl_name(IoControlCode)); */

		irp->IoStatus = STATUS_SUCCESS;
	}
	else
	{
		WLog_Print(serial->log, WLOG_DEBUG, "CommDeviceIoControl failure: IoControlCode=[0x%X] %s, last-error: 0x%lX",
			IoControlCode, _comm_serial_ioctl_name(IoControlCode), GetLastError());

		irp->IoStatus = _GetLastErrorToIoStatus(serial);
	}

  error_handle:

	/* FIXME: find out whether it's required or not to get
	 * BytesReturned == OutputBufferLength when
	 * CommDeviceIoControl returns FALSE */
	assert(OutputBufferLength == BytesReturned);

	Stream_Write_UINT32(irp->output, BytesReturned); /* OutputBufferLength (4 bytes) */

	if (BytesReturned > 0)
	{
		if (!Stream_EnsureRemainingCapacity(irp->output, BytesReturned))
		{
			WLog_ERR(TAG, "Stream_EnsureRemainingCapacity failed!");
			free(InputBuffer);
			free(OutputBuffer);
			return CHANNEL_RC_NO_MEMORY;
		}

		Stream_Write(irp->output, OutputBuffer, BytesReturned); /* OutputBuffer */
	}
	/* FIXME: Why at least Windows 2008R2 gets lost with this
	 * extra byte and likely on a IOCTL_SERIAL_SET_BAUD_RATE? The
	 * extra byte is well required according MS-RDPEFS
	 * 2.2.1.5.5 */
	/* else */
	/* { */
	/* 	Stream_Write_UINT8(irp->output, 0); /\* Padding (1 byte) *\/ */
	/* } */

	free(InputBuffer);
	free(OutputBuffer);
	return CHANNEL_RC_OK;
}

/**
 * Function description
 *
 * @return 0 on success, otherwise a Win32 error code
 */
static UINT serial_process_irp(SERIAL_DEVICE* serial, IRP* irp)
{
	UINT error = CHANNEL_RC_OK;
	WLog_Print(serial->log, WLOG_DEBUG, "IRP MajorFunction: 0x%04X MinorFunction: 0x%04X\n",
		irp->MajorFunction, irp->MinorFunction);

	switch (irp->MajorFunction)
	{
		case IRP_MJ_CREATE:
			serial_process_irp_create(serial, irp);
			break;

		case IRP_MJ_CLOSE:
			serial_process_irp_close(serial, irp);
			break;

		case IRP_MJ_READ:
			if ((error = serial_process_irp_read(serial, irp)))
				WLog_ERR(TAG, "serial_process_irp_read failed with error %lu!", error);
			break;

		case IRP_MJ_WRITE:
			serial_process_irp_write(serial, irp);
			break;

		case IRP_MJ_DEVICE_CONTROL:
			if ((error = serial_process_irp_device_control(serial, irp)))
				WLog_ERR(TAG, "serial_process_irp_device_control failed with error %lu!", error);
			break;

		default:
			irp->IoStatus = STATUS_NOT_SUPPORTED;
			break;
	}
	return error;
}


static void* irp_thread_func(void* arg)
{
	IRP_THREAD_DATA *data = (IRP_THREAD_DATA*)arg;
	UINT error;

	/* blocks until the end of the request */
	if ((error = serial_process_irp(data->serial, data->irp)))
	{
		WLog_ERR(TAG, "serial_process_irp failed with error %lu", error);
		goto error_out;
	}

	EnterCriticalSection(&data->serial->TerminatingIrpThreadsLock);
	data->serial->IrpThreadToBeTerminatedCount++;

	error = data->irp->Complete(data->irp);

	LeaveCriticalSection(&data->serial->TerminatingIrpThreadsLock);

error_out:
	if (error && data->serial->rdpcontext)
		setChannelError(data->serial->rdpcontext, error, "irp_thread_func reported an error");

	/* NB: At this point, the server might already being reusing
	 * the CompletionId whereas the thread is not yet
	 * terminated */

	free(data);

	ExitThread((DWORD)error);
	return NULL;
}


static void create_irp_thread(SERIAL_DEVICE *serial, IRP *irp)
{
	IRP_THREAD_DATA *data = NULL;
	HANDLE irpThread;
	HANDLE previousIrpThread;
	uintptr_t key;

	/* for a test/debug purpose, uncomment the code below to get a
	 * single thread for all IRPs. NB: two IRPs could not be
	 * processed at the same time, typically two concurent
	 * Read/Write operations could block each other. */
	/* serial_process_irp(serial, irp); */
	/* irp->Complete(irp); */
	/* return; */


	/* NOTE: for good or bad, this implementation relies on the
	 * server to avoid a flooding of requests. see also _purge().
	 */

	EnterCriticalSection(&serial->TerminatingIrpThreadsLock);
	while (serial->IrpThreadToBeTerminatedCount > 0)
	{
		/* Cleaning up termitating and pending irp
		 * threads. See also: irp_thread_func() */

		HANDLE irpThread;
		ULONG_PTR *ids;
		int i, nbIds;

		nbIds = ListDictionary_GetKeys(serial->IrpThreads, &ids);
		for (i=0; i<nbIds; i++)
		{
			/* Checking if ids[i] is terminating or pending */

			DWORD waitResult;
			ULONG_PTR id = ids[i];

			irpThread = ListDictionary_GetItemValue(serial->IrpThreads, (void*)id);

			/* FIXME: not quite sure a zero timeout is a good thing to check whether a thread is stil alived or not */
			waitResult = WaitForSingleObject(irpThread, 0);

			if (waitResult == WAIT_OBJECT_0)
			{
				/* terminating thread */

				/* WLog_Print(serial->log, WLOG_DEBUG, "IRP thread with CompletionId=%d naturally died", id); */

				CloseHandle(irpThread);
				ListDictionary_Remove(serial->IrpThreads, (void*)id);

				serial->IrpThreadToBeTerminatedCount--;
			}
			else if (waitResult != WAIT_TIMEOUT)
 			{
				/* unexpected thread state */

				WLog_Print(serial->log, WLOG_WARN, "WaitForSingleObject, got an unexpected result=0x%lX\n", waitResult);
				assert(FALSE);
			}
			/* pending thread (but not yet terminating thread) if waitResult == WAIT_TIMEOUT */
		}


		if (serial->IrpThreadToBeTerminatedCount > 0)
		{
			WLog_Print(serial->log, WLOG_DEBUG, "%d IRP thread(s) not yet terminated", serial->IrpThreadToBeTerminatedCount);
			Sleep(1); /* 1 ms */
		}
	}
	LeaveCriticalSection(&serial->TerminatingIrpThreadsLock);

	/* NB: At this point and thanks to the synchronization we're
	 * sure that the incoming IRP uses well a recycled
	 * CompletionId or the server sent again an IRP already posted
	 * which didn't get yet a response (this later server behavior
	 * at least observed with IOCTL_SERIAL_WAIT_ON_MASK and
	 * mstsc.exe).
	 *
	 * FIXME: behavior documented somewhere? behavior not yet
	 * observed with FreeRDP).
	 */

	key = irp->CompletionId;
	previousIrpThread = ListDictionary_GetItemValue(serial->IrpThreads, (void*)key);
	if (previousIrpThread)
	{
		/* Thread still alived <=> Request still pending */

		WLog_Print(serial->log, WLOG_DEBUG, "IRP recall: IRP with the CompletionId=%d not yet completed!", irp->CompletionId);

		assert(FALSE); /* unimplemented */

		/* TODO: asserts that previousIrpThread handles well
		 * the same request by checking more details. Need an
		 * access to the IRP object used by previousIrpThread
		 */

		/* TODO: taking over the pending IRP or sending a kind
		 * of wake up signal to accelerate the pending
		 * request
		 *
		 * To be considered:
		 *   if (IoControlCode == IOCTL_SERIAL_WAIT_ON_MASK) {
		 *       pComm->PendingEvents |= SERIAL_EV_FREERDP_*;
		 *   }
		 */

		irp->Discard(irp);
		return;
	}


	if (ListDictionary_Count(serial->IrpThreads) >= MAX_IRP_THREADS)
	{
		WLog_Print(serial->log, WLOG_WARN, "Number of IRP threads threshold reached: %d, keep on anyway", ListDictionary_Count(serial->IrpThreads));

		assert(FALSE); /* unimplemented */

		/* TODO: MAX_IRP_THREADS has been thought to avoid a
		 * flooding of pending requests. Use
		 * WaitForMultipleObjects() when available in winpr
		 * for threads.
		 */
	}


	/* error_handle to be used ... */

	data = (IRP_THREAD_DATA*)calloc(1, sizeof(IRP_THREAD_DATA));
	if (data == NULL)
	{
		WLog_Print(serial->log, WLOG_WARN, "Could not allocate a new IRP_THREAD_DATA.");
		goto error_handle;
	}

	data->serial = serial;
	data->irp = irp;

	/* data freed by irp_thread_func */

	irpThread = CreateThread(NULL,
				0,
				(LPTHREAD_START_ROUTINE)irp_thread_func,
				(void*)data,
				0,
				NULL);

	if (irpThread == INVALID_HANDLE_VALUE)
	{
		WLog_Print(serial->log, WLOG_WARN, "Could not allocate a new IRP thread.");
		goto error_handle;
	}


	key = irp->CompletionId;
	if (!ListDictionary_Add(serial->IrpThreads, (void*)key, irpThread))
	{
		WLog_ERR(TAG, "ListDictionary_Add failed!");
		goto error_handle;
	}

	return;

  error_handle:

	irp->IoStatus = STATUS_NO_MEMORY;
	irp->Complete(irp);

	free(data);
}


static void terminate_pending_irp_threads(SERIAL_DEVICE *serial)
{
	ULONG_PTR *ids;
	int i, nbIds;

	nbIds = ListDictionary_GetKeys(serial->IrpThreads, &ids);

	WLog_Print(serial->log, WLOG_DEBUG, "Terminating %d IRP thread(s)", nbIds);

	for (i=0; i<nbIds; i++)
	{
		HANDLE irpThread;
		ULONG_PTR id = ids[i];

		irpThread = ListDictionary_GetItemValue(serial->IrpThreads, (void*)id);

		TerminateThread(irpThread, 0);

		if (WaitForSingleObject(irpThread, INFINITE) == WAIT_FAILED)
        {
            WLog_ERR(TAG,"WaitForSingleObject failed!");
            continue;
        }

		CloseHandle(irpThread);

		WLog_Print(serial->log, WLOG_DEBUG, "IRP thread terminated, CompletionId %d", id);
	}

	ListDictionary_Clear(serial->IrpThreads);
}


static void* serial_thread_func(void* arg)
{
	IRP* irp;
	wMessage message;
	SERIAL_DEVICE* serial = (SERIAL_DEVICE*) arg;
	UINT error = CHANNEL_RC_OK;

	while (1)
	{
		if (!MessageQueue_Wait(serial->MainIrpQueue))
		{
			WLog_ERR(TAG, "MessageQueue_Wait failed!");
			error = ERROR_INTERNAL_ERROR;
			break;
		}

		if (!MessageQueue_Peek(serial->MainIrpQueue, &message, TRUE))
		{
			WLog_ERR(TAG, "MessageQueue_Peek failed!");
			error = ERROR_INTERNAL_ERROR;
			break;
		}

		if (message.id == WMQ_QUIT)
		{
			terminate_pending_irp_threads(serial);
			break;
		}

		irp = (IRP*) message.wParam;

		if (irp)
			create_irp_thread(serial, irp);
	}

	if (error && serial->rdpcontext)
		setChannelError(serial->rdpcontext, error, "serial_thread_func reported an error");

	ExitThread((DWORD) error);
	return NULL;
}


/**
 * Function description
 *
 * @return 0 on success, otherwise a Win32 error code
 */
static UINT serial_irp_request(DEVICE* device, IRP* irp)
{
	SERIAL_DEVICE* serial = (SERIAL_DEVICE*) device;

	assert(irp != NULL);

	if (irp == NULL)
		return CHANNEL_RC_OK;

	/* NB: ENABLE_ASYNCIO is set, (MS-RDPEFS 2.2.2.7.2) this
	 * allows the server to send multiple simultaneous read or
	 * write requests.
	 */

	if (!MessageQueue_Post(serial->MainIrpQueue, NULL, 0, (void*) irp, NULL))
	{
		WLog_ERR(TAG, "MessageQueue_Post failed!");
		return ERROR_INTERNAL_ERROR;
	}
	return CHANNEL_RC_OK;
}


/**
 * Function description
 *
 * @return 0 on success, otherwise a Win32 error code
 */
static UINT serial_free(DEVICE* device)
{
    UINT error;
	SERIAL_DEVICE* serial = (SERIAL_DEVICE*) device;

	WLog_Print(serial->log, WLOG_DEBUG, "freeing");

	MessageQueue_PostQuit(serial->MainIrpQueue, 0);
	if (WaitForSingleObject(serial->MainThread, INFINITE) == WAIT_FAILED)
    {
        error = GetLastError();
        WLog_ERR(TAG, "WaitForSingleObject failed with error %lu!", error);
        return error;
    }
	CloseHandle(serial->MainThread);

	if (serial->hComm)
		CloseHandle(serial->hComm);

	/* Clean up resources */
	Stream_Free(serial->device.data, TRUE);
	MessageQueue_Free(serial->MainIrpQueue);
	ListDictionary_Free(serial->IrpThreads);
	DeleteCriticalSection(&serial->TerminatingIrpThreadsLock);

	free(serial);
    return CHANNEL_RC_OK;
}

#endif /* __linux__ */

#ifdef STATIC_CHANNELS
#define DeviceServiceEntry	serial_DeviceServiceEntry
#else
#define DeviceServiceEntry	FREERDP_API DeviceServiceEntry
#endif

/**
 * Function description
 *
 * @return 0 on success, otherwise a Win32 error code
 */
UINT DeviceServiceEntry(PDEVICE_SERVICE_ENTRY_POINTS pEntryPoints)
{
	char* name;
	char* path;
	char* driver;
	RDPDR_SERIAL* device;
#if defined __linux__ && !defined ANDROID
	int i, len;
	SERIAL_DEVICE* serial;
#endif /* __linux__ */
	UINT error = CHANNEL_RC_OK;

	device = (RDPDR_SERIAL*) pEntryPoints->device;
	name = device->Name;
	path = device->Path;
	driver = device->Driver;

	if (!name || (name[0] == '*'))
	{
		/* TODO: implement auto detection of serial ports */
		return CHANNEL_RC_OK;
	}

	if ((name && name[0]) && (path && path[0]))
	{
		wLog* log;

		WLog_Init();
		log = WLog_Get("com.freerdp.channel.serial.client");
		WLog_Print(log, WLOG_DEBUG, "initializing");

#ifndef __linux__ /* to be removed */

		WLog_Print(log, WLOG_WARN, "Serial ports redirection not supported on this platform.");
		return CHANNEL_RC_INITIALIZATION_ERROR;

#else /* __linux __ */

		WLog_Print(log, WLOG_DEBUG, "Defining %s as %s", name, path);

		if (!DefineCommDevice(name /* eg: COM1 */, path /* eg: /dev/ttyS0 */))
		{
			WLog_ERR(TAG, "DefineCommDevice failed!");
			return ERROR_INTERNAL_ERROR;
		}

		serial = (SERIAL_DEVICE*) calloc(1, sizeof(SERIAL_DEVICE));
		if (!serial)
		{
			WLog_ERR(TAG, "calloc failed!");
			return CHANNEL_RC_NO_MEMORY;
		}

		serial->log = log;

		serial->device.type = RDPDR_DTYP_SERIAL;
		serial->device.name = name;
		serial->device.IRPRequest = serial_irp_request;
		serial->device.Free = serial_free;
		serial->rdpcontext = pEntryPoints->rdpcontext;

		len = strlen(name);
		serial->device.data = Stream_New(NULL, len + 1);
		if (!serial->device.data)
		{
			WLog_ERR(TAG, "calloc failed!");
			error = CHANNEL_RC_NO_MEMORY;
			goto error_out;
		}

		for (i = 0; i <= len; i++)
			Stream_Write_UINT8(serial->device.data, name[i] < 0 ? '_' : name[i]);

		if (driver != NULL)
		{
			if (_stricmp(driver, "Serial") == 0)
				serial->ServerSerialDriverId = SerialDriverSerialSys;
			else if (_stricmp(driver, "SerCx") == 0)
				serial->ServerSerialDriverId = SerialDriverSerCxSys;
			else if (_stricmp(driver, "SerCx2") == 0)
				serial->ServerSerialDriverId = SerialDriverSerCx2Sys;
			else
			{
				assert(FALSE);

				WLog_Print(serial->log, WLOG_DEBUG, "Unknown server's serial driver: %s. SerCx2 will be used", driver);
				serial->ServerSerialDriverId = SerialDriverSerialSys;
			}
		}
		else
		{
			/* default driver */
			serial->ServerSerialDriverId = SerialDriverSerialSys;
		}


		if (device->Permissive != NULL)
		{
			if (_stricmp(device->Permissive, "permissive") == 0)
			{
				serial->permissive = TRUE;
			}
			else
			{
				WLog_Print(serial->log, WLOG_DEBUG, "Unknown flag: %s", device->Permissive);
				assert(FALSE);
			}
		}


		WLog_Print(serial->log, WLOG_DEBUG, "Server's serial driver: %s (id: %d)", driver, serial->ServerSerialDriverId);
		/* TODO: implement auto detection of the server's serial driver */

		serial->MainIrpQueue = MessageQueue_New(NULL);
		if (!serial->MainIrpQueue)
		{
			WLog_ERR(TAG, "MessageQueue_New failed!");
			error = CHANNEL_RC_NO_MEMORY;
			goto error_out;
		}

		/* IrpThreads content only modified by create_irp_thread() */
		serial->IrpThreads = ListDictionary_New(FALSE);
		if(!serial->IrpThreads)
		{
			WLog_ERR(TAG, "ListDictionary_New failed!");
			error = CHANNEL_RC_NO_MEMORY;
			goto error_out;
		}
		serial->IrpThreadToBeTerminatedCount = 0;
		InitializeCriticalSection(&serial->TerminatingIrpThreadsLock);

		if ((error = pEntryPoints->RegisterDevice(pEntryPoints->devman, (DEVICE*) serial)))
		{
			WLog_ERR(TAG, "EntryPoints->RegisterDevice failed with error %lu!", error);
			goto error_out;
		}

		if (!(serial->MainThread = CreateThread(NULL,
						0,
						(LPTHREAD_START_ROUTINE) serial_thread_func,
						(void*) serial,
						0,
						NULL)))
		{
			WLog_ERR(TAG, "CreateThread failed!");
			error = ERROR_INTERNAL_ERROR;
			goto error_out;
		}
#endif /* __linux __ */
	}

	return error;
error_out:
#ifdef __linux__ /* to be removed */
	ListDictionary_Free(serial->IrpThreads);
	MessageQueue_Free(serial->MainIrpQueue);
	Stream_Free(serial->device.data, TRUE);
	free(serial);
#endif /* __linux __ */
	return error;
}