/** * FreeRDP: A Remote Desktop Protocol Implementation * Error Info * * Copyright 2011 Marc-Andre Moreau * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifdef HAVE_CONFIG_H #include "config.h" #endif #include #include "errinfo.h" int connectErrorCode; /* Protocol-independent codes */ #define ERRINFO_RPC_INITIATED_DISCONNECT_STRING \ "The disconnection was initiated by an administrative tool on the server in another session." #define ERRINFO_RPC_INITIATED_LOGOFF_STRING \ "The disconnection was due to a forced logoff initiated by an administrative tool on the server in another session." #define ERRINFO_IDLE_TIMEOUT_STRING \ "The idle session limit timer on the server has elapsed." #define ERRINFO_LOGON_TIMEOUT_STRING \ "The active session limit timer on the server has elapsed." #define ERRINFO_DISCONNECTED_BY_OTHER_CONNECTION_STRING \ "Another user connected to the server, forcing the disconnection of the current connection." #define ERRINFO_OUT_OF_MEMORY_STRING \ "The server ran out of available memory resources." #define ERRINFO_SERVER_DENIED_CONNECTION_STRING \ "The server denied the connection." #define ERRINFO_SERVER_INSUFFICIENT_PRIVILEGES_STRING \ "The user cannot connect to the server due to insufficient access privileges." #define ERRINFO_SERVER_FRESH_CREDENTIALS_REQUIRED_STRING \ "The server does not accept saved user credentials and requires that the user enter their credentials for each connection." #define ERRINFO_RPC_INITIATED_DISCONNECT_BY_USER_STRING \ "The disconnection was initiated by an administrative tool on the server running in the user's session." /* Protocol-independent licensing codes */ #define ERRINFO_LICENSE_INTERNAL_STRING \ "An internal error has occurred in the Terminal Services licensing component." #define ERRINFO_LICENSE_NO_LICENSE_SERVER_STRING \ "A Remote Desktop License Server ([MS-RDPELE] section 1.1) could not be found to provide a license." #define ERRINFO_LICENSE_NO_LICENSE_STRING \ "There are no Client Access Licenses ([MS-RDPELE] section 1.1) available for the target remote computer." #define ERRINFO_LICENSE_BAD_CLIENT_MSG_STRING \ "The remote computer received an invalid licensing message from the client." #define ERRINFO_LICENSE_HWID_DOESNT_MATCH_LICENSE_STRING \ "The Client Access License ([MS-RDPELE] section 1.1) stored by the client has been modified." #define ERRINFO_LICENSE_BAD_CLIENT_LICENSE_STRING \ "The Client Access License ([MS-RDPELE] section 1.1) stored by the client is in an invalid format." #define ERRINFO_LICENSE_CANT_FINISH_PROTOCOL_STRING \ "Network problems have caused the licensing protocol ([MS-RDPELE] section 1.3.3) to be terminated." #define ERRINFO_LICENSE_CLIENT_ENDED_PROTOCOL_STRING \ "The client prematurely ended the licensing protocol ([MS-RDPELE] section 1.3.3)." #define ERRINFO_LICENSE_BAD_CLIENT_ENCRYPTION_STRING \ "A licensing message ([MS-RDPELE] sections 2.2 and 5.1) was incorrectly encrypted." #define ERRINFO_LICENSE_CANT_UPGRADE_LICENSE_STRING \ "The Client Access License ([MS-RDPELE] section 1.1) stored by the client could not be upgraded or renewed." #define ERRINFO_LICENSE_NO_REMOTE_CONNECTIONS_STRING \ "The remote computer is not licensed to accept remote connections." /* RDP specific codes */ #define ERRINFO_UNKNOWN_DATA_PDU_TYPE_STRING \ "Unknown pduType2 field in a received Share Data Header (section 2.2.8.1.1.1.2)." #define ERRINFO_UNKNOWN_PDU_TYPE_STRING \ "Unknown pduType field in a received Share Control Header (section 2.2.8.1.1.1.1)." #define ERRINFO_DATA_PDU_SEQUENCE_STRING \ "An out-of-sequence Slow-Path Data PDU (section 2.2.8.1.1.1.1) has been received." #define ERRINFO_CONTROL_PDU_SEQUENCE_STRING \ "An out-of-sequence Slow-Path Non-Data PDU (section 2.2.8.1.1.1.1) has been received." #define ERRINFO_INVALID_CONTROL_PDU_ACTION_STRING \ "A Control PDU (sections 2.2.1.15 and 2.2.1.16) has been received with an invalid action field." #define ERRINFO_INVALID_INPUT_PDU_TYPE_STRING \ "(a) A Slow-Path Input Event (section 2.2.8.1.1.3.1.1) has been received with an invalid messageType field.\n" \ "(b) A Fast-Path Input Event (section 2.2.8.1.2.2) has been received with an invalid eventCode field." #define ERRINFO_INVALID_INPUT_PDU_MOUSE_STRING \ "(a) A Slow-Path Mouse Event (section 2.2.8.1.1.3.1.1.3) or Extended Mouse Event " \ "(section 2.2.8.1.1.3.1.1.4) has been received with an invalid pointerFlags field.\n" \ "(b) A Fast-Path Mouse Event (section 2.2.8.1.2.2.3) or Fast-Path Extended Mouse Event " \ "(section 2.2.8.1.2.2.4) has been received with an invalid pointerFlags field." #define ERRINFO_INVALID_REFRESH_RECT_PDU_STRING \ "An invalid Refresh Rect PDU (section 2.2.11.2) has been received." #define ERRINFO_CREATE_USER_DATA_FAILED_STRING \ "The server failed to construct the GCC Conference Create Response user data (section 2.2.1.4)." #define ERRINFO_CONNECT_FAILED_STRING \ "Processing during the Channel Connection phase of the RDP Connection Sequence " \ "(see section 1.3.1.1 for an overview of the RDP Connection Sequence phases) has failed." #define ERRINFO_CONFIRM_ACTIVE_HAS_WRONG_SHAREID_STRING \ "A Confirm Active PDU (section 2.2.1.13.2) was received from the client with an invalid shareId field." #define ERRINFO_CONFIRM_ACTIVE_HAS_WRONG_ORIGINATOR_STRING \ "A Confirm Active PDU (section 2.2.1.13.2) was received from the client with an invalid originatorId field." #define ERRINFO_PERSISTENT_KEY_PDU_BAD_LENGTH_STRING \ "There is not enough data to process a Persistent Key List PDU (section 2.2.1.17)." #define ERRINFO_PERSISTENT_KEY_PDU_ILLEGAL_FIRST_STRING \ "A Persistent Key List PDU (section 2.2.1.17) marked as PERSIST_PDU_FIRST (0x01) was received after the reception " \ "of a prior Persistent Key List PDU also marked as PERSIST_PDU_FIRST." #define ERRINFO_PERSISTENT_KEY_PDU_TOO_MANY_TOTAL_KEYS_STRING \ "A Persistent Key List PDU (section 2.2.1.17) was received which specified a total number of bitmap cache entries larger than 262144." #define ERRINFO_PERSISTENT_KEY_PDU_TOO_MANY_CACHE_KEYS_STRING \ "A Persistent Key List PDU (section 2.2.1.17) was received which specified an invalid total number of keys for a bitmap cache " \ "(the number of entries that can be stored within each bitmap cache is specified in the Revision 1 or 2 Bitmap Cache Capability Set " \ "(section 2.2.7.1.4) that is sent from client to server)." #define ERRINFO_INPUT_PDU_BAD_LENGTH_STRING \ "There is not enough data to process Input Event PDU Data (section 2.2.8.1.1.3.1) or a Fast-Path Input Event PDU (section 2.2.8.1.2)." \ #define ERRINFO_BITMAP_CACHE_ERROR_PDU_BAD_LENGTH_STRING \ "There is not enough data to process the shareDataHeader, NumInfoBlocks, " \ "Pad1, and Pad2 fields of the Bitmap Cache Error PDU Data ([MS-RDPEGDI] section 2.2.2.3.1.1)." #define ERRINFO_SECURITY_DATA_TOO_SHORT_STRING \ "(a) The dataSignature field of the Fast-Path Input Event PDU (section 2.2.8.1.2) does not contain enough data.\n" \ "(b) The fipsInformation and dataSignature fields of the Fast-Path Input Event PDU (section 2.2.8.1.2) do not contain enough data." #define ERRINFO_VCHANNEL_DATA_TOO_SHORT_STRING \ "(a) There is not enough data in the Client Network Data (section 2.2.1.3.4) to read the virtual channel configuration data.\n" \ "(b) There is not enough data to read a complete Channel PDU Header (section 2.2.6.1.1)." #define ERRINFO_SHARE_DATA_TOO_SHORT_STRING \ "(a) There is not enough data to process Control PDU Data (section 2.2.1.15.1).\n" \ "(b) There is not enough data to read a complete Share Control Header (section 2.2.8.1.1.1.1).\n" \ "(c) There is not enough data to read a complete Share Data Header (section 2.2.8.1.1.1.2) of a Slow-Path Data PDU (section 2.2.8.1.1.1.1).\n" \ "(d) There is not enough data to process Font List PDU Data (section 2.2.1.18.1)." #define ERRINFO_BAD_SUPPRESS_OUTPUT_PDU_STRING \ "(a) There is not enough data to process Suppress Output PDU Data (section 2.2.11.3.1).\n" \ "(b) The allowDisplayUpdates field of the Suppress Output PDU Data (section 2.2.11.3.1) is invalid." #define ERRINFO_CONFIRM_ACTIVE_PDU_TOO_SHORT_STRING \ "(a) There is not enough data to read the shareControlHeader, shareId, originatorId, lengthSourceDescriptor, " \ "and lengthCombinedCapabilities fields of the Confirm Active PDU Data (section 2.2.1.13.2.1).\n" \ "(b) There is not enough data to read the sourceDescriptor, numberCapabilities, pad2Octets, and capabilitySets " \ "fields of the Confirm Active PDU Data (section 2.2.1.13.2.1)." #define ERRINFO_CAPABILITY_SET_TOO_SMALL_STRING \ "There is not enough data to read the capabilitySetType and the lengthCapability fields in a received Capability Set (section 2.2.1.13.1.1.1)." #define ERRINFO_CAPABILITY_SET_TOO_LARGE_STRING \ "A Capability Set (section 2.2.1.13.1.1.1) has been received with a lengthCapability " \ "field that contains a value greater than the total length of the data received." #define ERRINFO_NO_CURSOR_CACHE_STRING \ "(a) Both the colorPointerCacheSize and pointerCacheSize fields in the Pointer Capability Set (section 2.2.7.1.5) are set to zero.\n" \ "(b) The pointerCacheSize field in the Pointer Capability Set (section 2.2.7.1.5) is not present, and the colorPointerCacheSize field is set to zero." #define ERRINFO_BAD_CAPABILITIES_STRING \ "The capabilities received from the client in the Confirm Active PDU (section 2.2.1.13.2) were not accepted by the server." #define ERRINFO_VIRTUAL_CHANNEL_DECOMPRESSION_STRING \ "An error occurred while using the bulk compressor (section 3.1.8 and [MS-RDPEGDI] section 3.1.8) to decompress a Virtual Channel PDU (section 2.2.6.1)" #define ERRINFO_INVALID_VC_COMPRESSION_TYPE_STRING \ "An invalid bulk compression package was specified in the flags field of the Channel PDU Header (section 2.2.6.1.1)." #define ERRINFO_INVALID_CHANNEL_ID_STRING \ "An invalid MCS channel ID was specified in the mcsPdu field of the Virtual Channel PDU (section 2.2.6.1)." #define ERRINFO_VCHANNELS_TOO_MANY_STRING \ "The client requested more than the maximum allowed 31 static virtual channels in the Client Network Data (section 2.2.1.3.4)." #define ERRINFO_REMOTEAPP_NOT_ENABLED_STRING \ "The INFO_RAIL flag (0x00008000) MUST be set in the flags field of the Info Packet (section 2.2.1.11.1.1) " \ "as the session on the remote server can only host remote applications." #define ERRINFO_CACHE_CAP_NOT_SET_STRING \ "The client sent a Persistent Key List PDU (section 2.2.1.17) without including the prerequisite Revision 2 Bitmap Cache " \ "Capability Set (section 2.2.7.1.4.2) in the Confirm Active PDU (section 2.2.1.13.2)." #define ERRINFO_BITMAP_CACHE_ERROR_PDU_BAD_LENGTH2_STRING \ "The NumInfoBlocks field in the Bitmap Cache Error PDU Data is inconsistent with the amount of data in the " \ "Info field ([MS-RDPEGDI] section 2.2.2.3.1.1)." #define ERRINFO_OFFSCREEN_CACHE_ERROR_PDU_BAD_LENGTH_STRING \ "There is not enough data to process an Offscreen Bitmap Cache Error PDU ([MS-RDPEGDI] section 2.2.2.3.2)." #define ERRINFO_DRAWNINEGRID_CACHE_ERROR_PDU_BAD_LENGTH_STRING \ "There is not enough data to process a DrawNineGrid Cache Error PDU ([MS-RDPEGDI] section 2.2.2.3.3)." #define ERRINFO_GDIPLUS_PDU_BAD_LENGTH_STRING \ "There is not enough data to process a GDI+ Error PDU ([MS-RDPEGDI] section 2.2.2.3.4)." #define ERRINFO_SECURITY_DATA_TOO_SHORT2_STRING \ "There is not enough data to read a Basic Security Header (section 2.2.8.1.1.2.1)." #define ERRINFO_SECURITY_DATA_TOO_SHORT3_STRING \ "There is not enough data to read a Non-FIPS Security Header (section 2.2.8.1.1.2.2) or FIPS Security Header (section 2.2.8.1.1.2.3)." #define ERRINFO_SECURITY_DATA_TOO_SHORT4_STRING \ "There is not enough data to read the basicSecurityHeader and length fields of the Security Exchange PDU Data (section 2.2.1.10.1)." #define ERRINFO_SECURITY_DATA_TOO_SHORT5_STRING \ "There is not enough data to read the CodePage, flags, cbDomain, cbUserName, cbPassword, cbAlternateShell, " \ "cbWorkingDir, Domain, UserName, Password, AlternateShell, and WorkingDir fields in the Info Packet (section 2.2.1.11.1.1)." #define ERRINFO_SECURITY_DATA_TOO_SHORT6_STRING \ "There is not enough data to read the CodePage, flags, cbDomain, cbUserName, cbPassword, cbAlternateShell, " \ "and cbWorkingDir fields in the Info Packet (section 2.2.1.11.1.1)." #define ERRINFO_SECURITY_DATA_TOO_SHORT7_STRING \ "There is not enough data to read the clientAddressFamily and cbClientAddress fields in the Extended Info Packet (section 2.2.1.11.1.1.1)." #define ERRINFO_SECURITY_DATA_TOO_SHORT8_STRING \ "There is not enough data to read the clientAddress field in the Extended Info Packet (section 2.2.1.11.1.1.1)." #define ERRINFO_SECURITY_DATA_TOO_SHORT9_STRING \ "There is not enough data to read the cbClientDir field in the Extended Info Packet (section 2.2.1.11.1.1.1)." #define ERRINFO_SECURITY_DATA_TOO_SHORT10_STRING \ "There is not enough data to read the clientDir field in the Extended Info Packet (section 2.2.1.11.1.1.1)." #define ERRINFO_SECURITY_DATA_TOO_SHORT11_STRING \ "There is not enough data to read the clientTimeZone field in the Extended Info Packet (section 2.2.1.11.1.1.1)." #define ERRINFO_SECURITY_DATA_TOO_SHORT12_STRING \ "There is not enough data to read the clientSessionId field in the Extended Info Packet (section 2.2.1.11.1.1.1)." #define ERRINFO_SECURITY_DATA_TOO_SHORT13_STRING \ "There is not enough data to read the performanceFlags field in the Extended Info Packet (section 2.2.1.11.1.1.1)." #define ERRINFO_SECURITY_DATA_TOO_SHORT14_STRING \ "There is not enough data to read the cbAutoReconnectLen field in the Extended Info Packet (section 2.2.1.11.1.1.1)." #define ERRINFO_SECURITY_DATA_TOO_SHORT15_STRING \ "There is not enough data to read the autoReconnectCookie field in the Extended Info Packet (section 2.2.1.11.1.1.1)." #define ERRINFO_SECURITY_DATA_TOO_SHORT16_STRING \ "The cbAutoReconnectLen field in the Extended Info Packet (section 2.2.1.11.1.1.1) contains a value " \ "which is larger than the maximum allowed length of 128 bytes." #define ERRINFO_SECURITY_DATA_TOO_SHORT17_STRING \ "There is not enough data to read the clientAddressFamily and cbClientAddress fields in the Extended Info Packet (section 2.2.1.11.1.1.1)." #define ERRINFO_SECURITY_DATA_TOO_SHORT18_STRING \ "There is not enough data to read the clientAddress field in the Extended Info Packet (section 2.2.1.11.1.1.1)." #define ERRINFO_SECURITY_DATA_TOO_SHORT19_STRING \ "There is not enough data to read the cbClientDir field in the Extended Info Packet (section 2.2.1.11.1.1.1)." #define ERRINFO_SECURITY_DATA_TOO_SHORT20_STRING \ "There is not enough data to read the clientDir field in the Extended Info Packet (section 2.2.1.11.1.1.1)." #define ERRINFO_SECURITY_DATA_TOO_SHORT21_STRING \ "There is not enough data to read the clientTimeZone field in the Extended Info Packet (section 2.2.1.11.1.1.1)." #define ERRINFO_SECURITY_DATA_TOO_SHORT22_STRING \ "There is not enough data to read the clientSessionId field in the Extended Info Packet (section 2.2.1.11.1.1.1)." #define ERRINFO_SECURITY_DATA_TOO_SHORT23_STRING \ "There is not enough data to read the Client Info PDU Data (section 2.2.1.11.1)." #define ERRINFO_BAD_MONITOR_DATA_STRING \ "The monitorCount field in the Client Monitor Data (section 2.2.1.3.6) is invalid." #define ERRINFO_VC_DECOMPRESSED_REASSEMBLE_FAILED_STRING \ "The server-side decompression buffer is invalid, or the size of the decompressed VC data exceeds " \ "the chunking size specified in the Virtual Channel Capability Set (section 2.2.7.1.10)." #define ERRINFO_VC_DATA_TOO_LONG_STRING \ "The size of a received Virtual Channel PDU (section 2.2.6.1) exceeds the chunking size specified " \ "in the Virtual Channel Capability Set (section 2.2.7.1.10)." #define ERRINFO_GRAPHICS_MODE_NOT_SUPPORTED_STRING \ "The graphics mode requested by the client is not supported by the server." #define ERRINFO_GRAPHICS_SUBSYSTEM_RESET_FAILED_STRING \ "The server-side graphics subsystem failed to reset." #define ERRINFO_UPDATE_SESSION_KEY_FAILED_STRING \ "An attempt to update the session keys while using Standard RDP Security mechanisms (section 5.3.7) failed." #define ERRINFO_DECRYPT_FAILED_STRING \ "(a) Decryption using Standard RDP Security mechanisms (section 5.3.6) failed.\n" \ "(b) Session key creation using Standard RDP Security mechanisms (section 5.3.5) failed." #define ERRINFO_ENCRYPT_FAILED_STRING \ "Encryption using Standard RDP Security mechanisms (section 5.3.6) failed." #define ERRINFO_ENCRYPTION_PACKAGE_MISMATCH_STRING \ "Failed to find a usable Encryption Method (section 5.3.2) in the encryptionMethods field of the Client Security Data (section 2.2.1.4.3)." #define ERRINFO_DECRYPT_FAILED2_STRING \ "Unencrypted data was encountered in a protocol stream which is meant to be encrypted with Standard RDP Security mechanisms (section 5.3.6)." /* Special codes */ #define ERRINFO_SUCCESS_STRING "Success." #define ERRINFO_NONE_STRING "" static const ERRINFO ERRINFO_CODES[] = { ERRINFO_DEFINE(SUCCESS), /* Protocol-independent codes */ ERRINFO_DEFINE(RPC_INITIATED_DISCONNECT), ERRINFO_DEFINE(RPC_INITIATED_LOGOFF), ERRINFO_DEFINE(IDLE_TIMEOUT), ERRINFO_DEFINE(LOGON_TIMEOUT), ERRINFO_DEFINE(DISCONNECTED_BY_OTHER_CONNECTION), ERRINFO_DEFINE(OUT_OF_MEMORY), ERRINFO_DEFINE(SERVER_DENIED_CONNECTION), ERRINFO_DEFINE(SERVER_INSUFFICIENT_PRIVILEGES), ERRINFO_DEFINE(SERVER_FRESH_CREDENTIALS_REQUIRED), ERRINFO_DEFINE(RPC_INITIATED_DISCONNECT_BY_USER), /* Protocol-independent licensing codes */ ERRINFO_DEFINE(LICENSE_INTERNAL), ERRINFO_DEFINE(LICENSE_NO_LICENSE_SERVER), ERRINFO_DEFINE(LICENSE_NO_LICENSE), ERRINFO_DEFINE(LICENSE_BAD_CLIENT_MSG), ERRINFO_DEFINE(LICENSE_HWID_DOESNT_MATCH_LICENSE), ERRINFO_DEFINE(LICENSE_BAD_CLIENT_LICENSE), ERRINFO_DEFINE(LICENSE_CANT_FINISH_PROTOCOL), ERRINFO_DEFINE(LICENSE_CLIENT_ENDED_PROTOCOL), ERRINFO_DEFINE(LICENSE_BAD_CLIENT_ENCRYPTION), ERRINFO_DEFINE(LICENSE_CANT_UPGRADE_LICENSE), ERRINFO_DEFINE(LICENSE_NO_REMOTE_CONNECTIONS), /* RDP specific codes */ ERRINFO_DEFINE(UNKNOWN_DATA_PDU_TYPE), ERRINFO_DEFINE(UNKNOWN_PDU_TYPE), ERRINFO_DEFINE(DATA_PDU_SEQUENCE), ERRINFO_DEFINE(CONTROL_PDU_SEQUENCE), ERRINFO_DEFINE(INVALID_CONTROL_PDU_ACTION), ERRINFO_DEFINE(INVALID_INPUT_PDU_TYPE), ERRINFO_DEFINE(INVALID_INPUT_PDU_MOUSE), ERRINFO_DEFINE(INVALID_REFRESH_RECT_PDU), ERRINFO_DEFINE(CREATE_USER_DATA_FAILED), ERRINFO_DEFINE(CONNECT_FAILED), ERRINFO_DEFINE(CONFIRM_ACTIVE_HAS_WRONG_SHAREID), ERRINFO_DEFINE(CONFIRM_ACTIVE_HAS_WRONG_ORIGINATOR), ERRINFO_DEFINE(PERSISTENT_KEY_PDU_BAD_LENGTH), ERRINFO_DEFINE(PERSISTENT_KEY_PDU_ILLEGAL_FIRST), ERRINFO_DEFINE(PERSISTENT_KEY_PDU_TOO_MANY_TOTAL_KEYS), ERRINFO_DEFINE(PERSISTENT_KEY_PDU_TOO_MANY_CACHE_KEYS), ERRINFO_DEFINE(INPUT_PDU_BAD_LENGTH), ERRINFO_DEFINE(BITMAP_CACHE_ERROR_PDU_BAD_LENGTH), ERRINFO_DEFINE(SECURITY_DATA_TOO_SHORT), ERRINFO_DEFINE(VCHANNEL_DATA_TOO_SHORT ), ERRINFO_DEFINE(SHARE_DATA_TOO_SHORT), ERRINFO_DEFINE(BAD_SUPPRESS_OUTPUT_PDU), ERRINFO_DEFINE(CONFIRM_ACTIVE_PDU_TOO_SHORT), ERRINFO_DEFINE(CAPABILITY_SET_TOO_SMALL), ERRINFO_DEFINE(CAPABILITY_SET_TOO_LARGE), ERRINFO_DEFINE(NO_CURSOR_CACHE), ERRINFO_DEFINE(BAD_CAPABILITIES), ERRINFO_DEFINE(VIRTUAL_CHANNEL_DECOMPRESSION), ERRINFO_DEFINE(INVALID_VC_COMPRESSION_TYPE), ERRINFO_DEFINE(INVALID_CHANNEL_ID), ERRINFO_DEFINE(VCHANNELS_TOO_MANY), ERRINFO_DEFINE(REMOTEAPP_NOT_ENABLED), ERRINFO_DEFINE(CACHE_CAP_NOT_SET), ERRINFO_DEFINE(BITMAP_CACHE_ERROR_PDU_BAD_LENGTH2), ERRINFO_DEFINE(OFFSCREEN_CACHE_ERROR_PDU_BAD_LENGTH), ERRINFO_DEFINE(DRAWNINEGRID_CACHE_ERROR_PDU_BAD_LENGTH), ERRINFO_DEFINE(GDIPLUS_PDU_BAD_LENGTH), ERRINFO_DEFINE(SECURITY_DATA_TOO_SHORT2), ERRINFO_DEFINE(SECURITY_DATA_TOO_SHORT3), ERRINFO_DEFINE(SECURITY_DATA_TOO_SHORT4), ERRINFO_DEFINE(SECURITY_DATA_TOO_SHORT5), ERRINFO_DEFINE(SECURITY_DATA_TOO_SHORT6), ERRINFO_DEFINE(SECURITY_DATA_TOO_SHORT7), ERRINFO_DEFINE(SECURITY_DATA_TOO_SHORT8), ERRINFO_DEFINE(SECURITY_DATA_TOO_SHORT9), ERRINFO_DEFINE(SECURITY_DATA_TOO_SHORT10), ERRINFO_DEFINE(SECURITY_DATA_TOO_SHORT11), ERRINFO_DEFINE(SECURITY_DATA_TOO_SHORT12), ERRINFO_DEFINE(SECURITY_DATA_TOO_SHORT13), ERRINFO_DEFINE(SECURITY_DATA_TOO_SHORT14), ERRINFO_DEFINE(SECURITY_DATA_TOO_SHORT15), ERRINFO_DEFINE(SECURITY_DATA_TOO_SHORT16), ERRINFO_DEFINE(SECURITY_DATA_TOO_SHORT17), ERRINFO_DEFINE(SECURITY_DATA_TOO_SHORT18), ERRINFO_DEFINE(SECURITY_DATA_TOO_SHORT19), ERRINFO_DEFINE(SECURITY_DATA_TOO_SHORT20), ERRINFO_DEFINE(SECURITY_DATA_TOO_SHORT21), ERRINFO_DEFINE(SECURITY_DATA_TOO_SHORT22), ERRINFO_DEFINE(SECURITY_DATA_TOO_SHORT23), ERRINFO_DEFINE(BAD_MONITOR_DATA), ERRINFO_DEFINE(VC_DECOMPRESSED_REASSEMBLE_FAILED), ERRINFO_DEFINE(VC_DATA_TOO_LONG), ERRINFO_DEFINE(GRAPHICS_MODE_NOT_SUPPORTED), ERRINFO_DEFINE(GRAPHICS_SUBSYSTEM_RESET_FAILED), ERRINFO_DEFINE(UPDATE_SESSION_KEY_FAILED), ERRINFO_DEFINE(DECRYPT_FAILED), ERRINFO_DEFINE(ENCRYPT_FAILED), ERRINFO_DEFINE(ENCRYPTION_PACKAGE_MISMATCH), ERRINFO_DEFINE(DECRYPT_FAILED2), ERRINFO_DEFINE(NONE) }; void rdp_print_errinfo(UINT32 code) { const ERRINFO* errInfo; errInfo = &ERRINFO_CODES[0]; while (errInfo->code != ERRINFO_NONE) { if (code == errInfo->code) { printf("%s (0x%08X):\n%s\n", errInfo->name, code, errInfo->info); return; } errInfo++; } printf("ERRINFO_UNKNOWN 0x%08X: Unknown error.\n", code); }