The command line detection fails, if only one of the aforementioned
files is used as an argument. Detect those first and ignore command
line detection if found.
Move the cmd struct to a extra header file. This allows it to only
include the header file in generate_argument_docbook.c and therefore
remove a linker dependencies.
If the display channel is available we use it to allow the user to resize the
xfreerdp window. When the window is resized we announce a new monitor layout and
the server reacts by doing a reactivation sequence to the new size.
The minimum window size is limited to 300x300 as 2012 servers crash horribly
if we send them a smaller layout.
FreeRDP aborts if OpenSSL operates in FIPS mode and +fipsmode is not
manually specified. Let's prevent the abortion and enable the necessary
options in that case automatically.
This option will ensure that NLA is disabled(since NTLM uses weak crypto algorithms), FIPS
encryption is enabled, and ensure fips mode is enabled for openssl.
Selectively override specific uses of MD5/RC4 with new API calls specifically tailored to override FIPS.
Add comments on why overriding the use of these algorithms under FIPS is acceptable for the locations where overrides happen.
Remove check of server proprietary certificate which was already being ignore to avoid use of MD5.
Initialize winpr openssl earlier to ensure fips mode is set before starting using any crypto algorithms.
The idea is based on #3257.
If a non NLA connection is requested the password callbacks are not executed
and there is currently no way to read from stdin.
This extension of /from-stdin allows reading the passwords
before the connection is established.
Add the sshagent plugin to forward the ssh-agent protocol over an RDP
dynamic virtual channel, just as the normal ssh-agent forwards it over
an SSH channel. Add the "/ssh-agent" command line option to enable it.
Usage:
Run FreeRDP with the ssh-agent plugin enabled:
xfreerdp /ssh-agent ...
In the remote desktop session run xrdp-ssh-agent and evaluate the output
in the shell as for ssh-agent to set the required environment variables
(specifically $SSH_AUTH_SOCK):
eval "$(xrdp-ssh-agent -s)"
This is the same as for the normal ssh-agent. You would typically do
this in your Xsession or /etc/xrdp/startwm.sh.
Limitations:
1. Error checking and handling could be improved.
2. This is only tested on Linux and will only work on systems where
clients talk to the ssh-agent via Unix domain sockets. It won't
currently work on Windows but it could be ported.
Added some checks so that when setting a cache entry fails, we close connection (or
we fail later when trying to use that empty entry).
The small cache egfx capability has also been fixed.
When building packages, especially when source packages are used, git is
not necessarily available or the source isn't provided in git. In those
cases it wasn't possible to set the GIT_REVISION and --version shows
"n/a" for the git revision.
If the file .source_version is available now the content of it is used
as GIT_REVISION. Packagers might want to add a .source_version file
when they don't build the packages from git.
Possible breaking change:
The variable PRODUCT_VERSION isn't available anymore. Use GIT_REVISION
instead.
This patch contains several improvements in order to make the help
output more readable (reduce length of first column):
- move default value into description
- use ... instead of too long format strings
- use [] for optional arguments
This patch contains several improvements for arguments list:
- use capitals consistently
- remove full stop sign at the end
- use "experimental" constiently for unstable and hacky features
- use <> for variables consistenly
- use [] for optional parts consistently.
- shorten some format strings to make /help more readable
- replace whitespace in variables for better readability (especialy man page)
- fix wrong argument tyes
- add missing formats
If the size parameter is used with a percentages like /size:50% now
an additional 'w' or 'h' can be appended (like /size:50%w) to specify
where the percentage should be applied. If both or none are set the
behavior is like it was before and the percentage is applied to width
and height.
Allow password to be stored in .RDP file and parsed and settings
updated, this will allow for dynamic .RDP files to be created with
complete login credentials, using this method the username, server and
password will no longer be visible within process lists.
Also fixed issue of username and domain being read from .RDP files and
set to null by command line processor.
- fixed invalid, missing or additional arguments
- removed all type casts from arguments
- added missing (void*) typecasts for %p arguments
- use inttypes defines where appropriate
Extend winpr and client/common to support a new option "/buildconfig".
When used build the following build specific information is print:
* cmake options
* cflags
* compiler
* target architecture
* cmake build type
In case the old behaviour of not reverse-mapping the mouse buttons is
desirable, a command-line option is added to disable the mapping. This
option is made experimental for the time being.
The default is to do the reverse mapping, as this is the intuitive
behaviour (the mouse then works as it would on the console).
This patch contains:
* checks for malloc return value + treat callers;
* modified malloc() + ZeroMemory() to calloc();
* misc fixes of micro errors seen during the code audit:
** some invalid checks in gcc.c, also there were some possible
integer overflow. This is interesting because at the end the data are parsed
and freed directly, so it's a vulnerability in some kind of dead code (at least
useless);
** fixed usage of GetComputerNameExA with just one call, when 2 were used
in misc places. According to MSDN GetComputerNameA() is supposed to return
an error when called with NULL;
** there were a bug in the command line parsing of shadow;
** in freerdp_dynamic_channel_collection_add() the size of array was multiplied
by 4 instead of 2 on resize
+ add: COMMAND_LINE_IGN_UNKNOWN_KEYWORD flag for CommandLineParseArgumentsA to ignory unknown keys without fail
+ add: lot of WLog_DBG() in drdynvc, add function names in existing
* change: error text in rdpsnd OSS
* fix: dev in rdpsnd does not work
* fix/change: audio-dev renamed to dev and now work in audin
* fix dynamic channels now work again
[MS-RDPBCGR] Section 5.3 describes the encryption level and method values for
standard RDP security.
Looking at the current usage of these values in the FreeRDP code gives me
reason to believe that there is a certain lack of understanding of how these
values should be handled.
The encryption level is only configured on the server side in the "Encryption
Level" setting found in the Remote Desktop Session Host Configuration RDP-Tcp
properties dialog and this value is never transferred from the client to the
server over the wire.
The possible options are "None", "Low", "Client Compatible", "High" and
"FIPS Compliant". The client receices this value in the Server Security Data
block (TS_UD_SC_SEC1), probably only for informational purposes and maybe to
give the client the possibility to verify if the server's decision for the
encryption method confirms to the server's encryption level.
The possible encryption methods are "NONE", "40BIT", "56BIT", "128BIT" and
"FIPS" and the RDP client advertises the ones it supports to the server in the
Client Security Data block (TS_UD_CS_SEC).
The server's configured encryption level value restricts the possible final
encryption method.
Something that I was not able to find in the documentation is the priority
level of the individual encryption methods based on which the server makes its
final method decision if there are several options.
My analysis with Windows Servers reveiled that the order is 128, 56, 40, FIPS.
The server only chooses FIPS if the level is "FIPS Comliant" or if it is the
only method advertised by the client.
Bottom line:
* FreeRDP's client side does not need to set settings->EncryptionLevel
(which was done quite frequently).
* FreeRDP's server side does not have to set the supported encryption methods
list in settings->EncryptionMethods
Changes in this commit:
Removed unnecessary/confusing changes of EncryptionLevel/Methods settings
Refactor settings->DisableEncryption
* This value actually means "Advanced RDP Encryption (NLA/TLS) is NOT used"
* The old name caused lots of confusion among developers
* Renamed it to "UseRdpSecurityLayer" (the compare logic stays untouched)
Any client's setting of settings->EncryptionMethods were annihilated
* All clients "want" to set all supported methods
* Some clients forgot 56bit because 56bit was not supported at the time the
code was written
* settings->EncryptionMethods was overwritten anyways in nego_connect()
* Removed all client side settings of settings->EncryptionMethods
The default is "None" (0)
* Changed nego_connect() to advertise all supported methods if
settings->EncryptionMethods is 0 (None)
* Added a commandline option /encryption-methods:comma separated list of the
values "40", "56", "128", "FIPS". E.g. /encryption-methods:56,128
* Print warning if server chooses non-advertised method
Verify received level and method in client's gcc_read_server_security_data
* Only accept valid/known encryption methods
* Verify encryption level/method combinations according to MS-RDPBCGR 5.3.2
Server implementations can now set settings->EncryptionLevel
* The default for settings->EncryptionLevel is 0 (None)
* nego_send_negotiation_response() changes it to ClientCompatible in that case
* default to ClientCompatible if the server implementation set an invalid level
Fix server's gcc_write_server_security_data
* Verify server encryption level value set by server implementations
* Choose rdp encryption method based on level and supported client methods
* Moved FIPS to the lowest priority (only used if other methods are possible)
Updated sample server
* Support RDP Security (RdpKeyFile was not set)
* Added commented sample code for setting the security level
1.0 had the ability to specifiy window geometry by a percentage.
The support is still there, just needed command line support.
Example in 1.1 syntax: /size:85%
This adds 2 arguments:
/tls-ciphers List of permitted openssl ciphers - see ciphers(1)
/tls-ciphers-netmon Use tls ciphers that netmon can parse
With KB2919355, client/server negotiate the use of
TLS cipher TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA,
which works fine except that netmon can't parse it.
By adding commandline /tls-ciphers-netmon, we restrict
the available ciphers to a list that netmon can
deal with. Also adds /tls-ciphers, which
accepts a string arg, for further customization.
This patch changes the prototype for decode_base64 so that the encode / decode
method are consistant (encode(BYTE *) => char* and decode(char*) => BYTE*).
It also does some improvements with unrolling loops so that end conditions are
tested only at the end.
The patch also adds some unitary tests.
Before the patch base64_decode() made valgrind complain about uninitialized
bits, after valgrind is happy and very quiet.
- fixed invalid stream position if extEncryptionMethods is not used
- enabled 56bit rdp security method
- fixed entropy reduction of the keys for 40 bit and 56 bit
- added rdp security incl. FIPS for fastpath output
- added FIPS encryption to fast path input
- fixed FIPS key generation in server mode
- fixed stream length correction in FIPS mode
- added rdp encryption for licensing packets (apparently some clients,
specifically cetsc, require the license packets received from the
server to be encrypted under certain RDP encryption levels)
- replace errnous virtual extended mouse event in focus in event
