Always reinitialize NetworkAutoDetect, otherwise it might end set to
previous value and not the desired one. This happens when the client
sets /network:lan , in which case NetworkAutoDetect remains set to
TRUE because freerdp_set_connection_type() was previously called in
prepare_default_settings() and NetworkAutoDetect is never updated by
freerdp_set_connection_type() afterward.
Signed-off-by: Marek Vasut <marex@denx.de>
In either case of wlf_handle_touch_up()/wlf_handle_touch_down(), the
UINT16 flags are set to fixed values, so there is little reason for
checking presence of specific flag in them again. The conditional is
always true no less, so just call freerdp_input_send_mouse_event().
Moreover, the flags submitted to the remote are wrong. The code should
send BUTTON1/DOWN/MOVE on wlf_handle_touch_down(), so the remote would
pick not only the button down event, but also the coordinate update,
else the remote would receive a mouse click at the wrong coordinates.
The wlf_handle_touch_motion() should update the pointer location too,
make it send plain MOVE event.
Signed-off-by: Marek Vasut <marex@denx.de>
The wlf_handle_touch_down() implements fallback to mouse event submission
in case RDPEI is not available. This fallback is currently never reached,
because the WINPR_ASSERT(rdpei); triggers before the fallback conditional
is reached.
Move the WINPR_ASSERT(rdpei); after the RDPEI availability check to permit
the fallback to do its job.
Signed-off-by: Marek Vasut <marex@denx.de>
* add option to build as console by using WITH_WIN_CONSOLE
* add passphrase read from stdin for Win32
* fix windows authentication with stdin password
* allow redirected stdin to be used for stdin input
* flush stdout to help with automation
* use stdin when /from-stdin is present
* add error log for stdin flag but stdin redirected
* All channels inheriting from RDPDR_DRIVE base struct
* Add functions to create/free a new device of a type
* Fixed settings array resize code, prevent 0 sizes
* Fix temporary settings allocation for command line
Detection of legacy command line requires a temporary settings
struct. This was previously manyally allocated instead of using
freerdp_settings_new and freerdp_settings_free.
* Fixed CommandLineParseCommaSeparatedValuesEx
The name argument was not copied into the returned array.
When leaving fullscreen with enabled smart sizing the window size
did shrink due to first resizing the window, then enabling window
decorations and finally moving to the correct position.
If no arguments are supplied, default to the behaviour of
/network:auto. This ensures the default experience is using the
best available graphics options.
As soon as any /network, /bpp, /rfx, /gfx, ... argument is used
only use these.
RDPSND channel is special, as it has many names.
(e.g. static channel, dynamic channel and UDP one.
Use RDPSND_CHANNEL_NAME to identify the module name instad of
RDPSND_DVC_CHANNEL_NAME
Since the last change untouched string settings were written to the rdp
file because their default value was set to NULL instead of ~0. This
resulted in settings being written to the rdp file with a value of
"(null)" instead of just being skipped.
Covscan report contains various memory leak defects which were marked
as important. I have spent some time analyzing them and although they
were marked as important, most of them are in error cases, so probably
nothing serious. Let's fix most of them anyway. The rest are false
positives, or too complicated to fix, or already fixed in master, or
simply I am unsure about them.
Relates: https://github.com/FreeRDP/FreeRDP/issues/6981
(some client side channels and all server side channels still need to be
ported to new api)
server: build fix, do not disable threads for rfx encoder
cliprdr client channel: implemented support for DisableThreads option
looks like thread does not make sense at all for this channel
do not initialize disabled image codecs (respect settings)
channels: client: rail: added support for DisableThreads setting
changed "BOOL DisableThreads" to "UINT32 ThreadingFlags"
dropped unnecessary apu changes
draft implementation of threading settings aware message handling api
for addins/channels
rail: use new messaging api
fixed memory leak
msgs handlers external api changes (as requested)
msgs_handlers: init fix
fixed memory leak
logic fix
resolved problems appeared after rebase to master, dropped unnecessary
changes
git clang-format origin/master
fixed TestFreeRDPCodecRemoteFX.c
"formatting, run `clang-format` please"
properly use new "rfx_context_new(BOOL, UINT32)" everywhere
passed Threading Flags to "rfx_context_new" where available
in older C standarts veriables declaration must be done before any code
requested changes
clang-format as requested
use broken signatures of standert C functions for m$ s**tos
clang-format
requested changes
requested changes
moved ThreadingFlags to stable api zone
define type for channel msg handler
typo fix
clang-format
build fix
us ThreadingFlags from server settings
git clang-format origin/master
clang-format
This fixes click and drag or more generally any press-hold-release combinations
for the primary mouse button.
Without this, click and drag, drag and drop and in, some remote applications
that presumably rely on the full press-release sequence, even button
presses don't always work.
For the negative scrolling direction, RDP uses the two's complement,
instead of the positive wheel value with the negative flag.
xfreerdp currently uses the positive wheel value in addition to the
negative flag, which results in a wrong wheel value on the server side
(136 instead of 120).
Fix this, by using the correct wheel rotation value, which is in the
two's complement.
Changed the logic of the disp channel to wait for 800ms after a
ConfigureNotify before sending the new resolution.
The problem fixed with this patch is the following:
1. Resize the window with the mouse
2. ConfigureNotify triggers a resize notification
3. The server resizes to the desired resolution
3a. More ConfigureNotify events are generated
4. The local window resize to the new resolution triggers another
ConfigureNotify
a. Depending on the timing (sending is already rate limited) the
events from 3a and 4 will make the size of the window jump
b. Very fast resizing will pick a random resolution from the
sequence of ConfigureNotify events as the final resolution
the discrete axis event gives changes in steps just like the
xfreerdp version uses. This way scrolling can be implemented
consistent with the behaviour of xfreerdp
* client: Fix exit codes for /help and similar option
Currently, non-zero exit code is returned for /version, /buildconfig, /help,
/monitor-list, /kbd-list and /kbd-lang-list command-line options for several
clients. This is against conventions because 0 is usually returned in
such cases. Also, there is potentially another problem that the returned
codes overflow on UNIX systems (where the exit code is a number between 0
and 255). Let's fix the clients to return 0 in the mentioned cases to honor
conventions and 1 for the command-line parsing errors (or -1 for clients
who already use that value).
Fixes: https://github.com/FreeRDP/FreeRDP/issues/6686
* Refactored freerdp_client_settings_command_line_status_print_ex
Now returns 0 if help or version information was requested.
* Do not eliminate original error status.
Co-authored-by: akallabeth <akallabeth@posteo.net>
I personally find it more convenient to have pasted data written to
the X11 PRIMARY selection, so that I can paste it with a fast middle-
button click, than to write to CLIPBOARD which typically needs a key
sequence or menu action.
This commit adds a command-line option to let me express that
preference: now I can say "/clipboard:use-selection:PRIMARY" on the
command line, which not only enables clipboard transfer but also says
which X selection I want it to talk to. The previous options
"+clipboard" and "-clipboard" are also still supported.
Now you can give an option the combination of flags
COMMAND_LINE_VALUE_OPTIONAL and COMMAND_LINE_VALUE_BOOL. If you do,
then all three of the syntaxes +foo, -foo and /foo:value are allowed
at once, and the receiving code can tell the difference because the
Value field is set to BoolValueTrue, BoolValueFalse or a valid char
pointer.
A selection owner is supposed to respond to a request for the
selection target TIMESTAMP by providing the X server time at which the
selection was written. There was a /* TODO */ comment in xf_cliprdr
where the code to do that should have been.
The absence of this can cause a problem when pasting into some X
clients. xtightvncviewer, in particular, will give up the attempt to
read from the clipboard at all if it doesn't get a satisfactory
response to the initial TIMESTAMP request - and the non-answer zero
value "CurrentTime" counts as unsatisfactory. It won't be happy with
anything short of a real X server time value.
(Checking the VNC source code, that's because it reads both PRIMARY
and CLIPBOARD and picks the one with the later timestamp. So it does
depend on the timestamps existing.)
When you're writing to the selection in response to a normal X event
like a mouse click or keyboard action, you get the selection timestamp
by copying the time field out of that X event. Here, we're doing it on
our own initiative, so we have to _request_ the X server time. There
isn't a GetServerTime request in the X protocol, so I work around it
by setting a property on our own window, and waiting for a
PropertyNotify event to come back telling me it's been done - which
will have a timestamp we can use.
* The display resolution change message was prone to a race condition
* Check for actual fullscreen state instead of settings
* Assume 75dpi for display resolution to mm conversion
mstsc will only load our gateway settings if gatewayprofileusagemethod
is set to 1. Otherwise it will always set the option "Auto-detect RD
Gateway server settings" and ignore the other gateway settings in the
rdp file.
This PR fixes various issues in the rdp file parser:
- NetworkAutoDetect was written inverted
- GatewayHostname was missing the port info (if not default)
- Several settings were left out when populating the file struct
