If the server sends us garbage (or the client provides it) then it is
possible for the multiplication to overflow (as it is performed on
unsigned 32-bit values) which will result in a false positive failure of
the sanity check. Avoid it by rearranging arithmetics a little.
Keep the multiplication in the error message because we are interested
in the number of bytes in the stream and how it compares to the number
we have expected based on the presumed file count.
[channels/tsmf/client/tsmf_main.c:89] -> [channels/tsmf/client/tsmf_main.c:95]: (warning) Either the condition '!callback' is redundant or there is possible null pointer dereference: callback.
[channels/urbdrc/client/libusb/libusb_udevice.c:1666] -> [channels/urbdrc/client/libusb/libusb_udevice.c:1661]: (warning) Either the condition 'request' is redundant or there is possible null pointer dereference: request.
[channels/drive/client/drive_file.c:125]: (error) Memory leak: path_slash
[server/Windows/wf_dxgi.c:195]: (error) Invalid number of character '(' when these macros are defined: 'WITH_DXGI_1_2'.
The file contents PDUs support 64-bit file sizes and offsets, but
MS-RDPECLIP explicitly says in 2.2.5.3 File Contents Request PDU that
file larger that 4 gigabytes are not supported by the server. It turns
out that the supported size is even lower than that. The server cannot
correctly handle files larger than 2 gigabytes (inclusive). When faced
with such files it correctly retireves the lower part, but fails to
accept any data past that boundary. After receiving a file range reply
the server repeats the file range request with the same offset, and
again, and again, and again, making no progress and blocking the file
transfer indefinitely. This is not the behavior we would like to have.
Microsoft support site acknowledges and documents the issue [1],
suggesting the users to use disk drive redirection instead to transfer
large files. (File transfers via cliprdr are considerably slower than
disk drive redirection so the suggestion makes very much sense.)
However, we would like to avoid the lockdown of the remote session if
the user does attempt to transfer such files so we add a size check.
Putting it into the conversion from FILEDESCRIPTOR to CLIPRDR_FILELIST
is not an ideal place (the clients may not use the common utilities),
but that's good enough currently.
[1]: https://support.microsoft.com/en-us/help/2258090
Do not try to 'helpfully' fixup the length of the data provided by the
client when FILECONTENTS_SIZE is present. This can lead to a crash if
the client wants to report an error in msgFlags, sets cbRequested to
zero, and does not provide any data in requestedData. For example,
XFreeRDP does this in xf_cliprdr_send_file_contents_failure() and
xf_cliprdr_clipboard_file_size_failure().
clipDataId is an optional field of CLIPRDR_FILECONTENTS_REQUEST.
The client should not send it to the server without sending a prior
CLIPRDR_LOCK_CLIPDATA request. The reverse is true as well: the
server should not include these additional 4 bytes without locking
the file in question.
The value zero is a valid ID, it cannot be used as a sentinel value.
Introduce a separate flag to tell whether the clipDataId has been set
and can be relied upon.
Also fix formatting. These stupid line breaks have negative impact on
readability, and the lines do fit into the 100 column limit either way.
The format is described in MS-RDPECLIP 2.2.5.2.3 Packed File List
(CLIPRDR_FILELIST). These functions handle conversion between the
on-the-wire data from cliprdr and arrays of FILEDESCRIPTOR structs.
FILETIME handling is a bit wacky, but that's what we currently have.
channels/cliprdr/client/cliprdr_main.c:121:13: warning: ‘cliprdr_print_general_capability_flags’ defined but not used [-Wunused-function]
static void cliprdr_print_general_capability_flags(UINT32 flags)
^
[channels/tsmf/client/gstreamer/tsmf_X11.c:472] -> [channels/tsmf/client/gstreamer/tsmf_X11.c:474]: (warning) Either the condition '!decoder' is redundant or there is possible null pointer dereference: decoder.
Conflicts:
channels/smartcard/client/smartcard_operations.c
channels/smartcard/client/smartcard_pack.c
channels/smartcard/client/smartcard_pack.h
smartcard_operations: move handling of call argument into functions
The call argument was only use by static functions and was always equal
to operation->call. Remove the argument and use operation-call directly.
Also put the memory allocation and check into the same place.
Conflicts:
channels/smartcard/client/smartcard_operations.c
Updated formatting and API
[channels/urbdrc/client/data_transfer.c:2310] -> [channels/urbdrc/client/data_transfer.c:2322]: (warning) Either the condition 'if(transfer_data)' is redundant or there is possible null pointer dereference: transfer_data.
[channels/urbdrc/client/data_transfer.c:2311] -> [channels/urbdrc/client/data_transfer.c:2322]: (warning) Either the condition 'if(transfer_data)' is redundant or there is possible null pointer dereference: transfer_data.
[channels/urbdrc/client/data_transfer.c:2312] -> [channels/urbdrc/client/data_transfer.c:2322]: (warning) Either the condition 'if(transfer_data)' is redundant or there is possible null pointer dereference: transfer_data.
[channels/urbdrc/client/data_transfer.c:2313] -> [channels/urbdrc/client/data_transfer.c:2322]: (warning) Either the condition 'if(transfer_data)' is redundant or there is possible null pointer dereference: transfer_data.
[channels/urbdrc/client/data_transfer.c:2314] -> [channels/urbdrc/client/data_transfer.c:2322]: (warning) Either the condition 'if(transfer_data)' is redundant or there is possible null pointer dereference: transfer_data.
[channels/urbdrc/client/isoch_queue.c:124] -> [channels/urbdrc/client/isoch_queue.c:126]: (warning) Either the condition 'if(isoch)' is redundant or there is possible null pointer dereference: isoch.
[channels/tsmf/client/gstreamer/tsmf_X11.c:317] -> [channels/tsmf/client/gstreamer/tsmf_X11.c:322]: (warning) Either the condition '!decoder' is redundant or there is possible null pointer dereference: decoder.
[channels/tsmf/client/gstreamer/tsmf_X11.c:470] -> [channels/tsmf/client/gstreamer/tsmf_X11.c:475]: (warning) Either the condition '!decoder' is redundant or there is possible null pointer dereference: decoder.
[channels/tsmf/client/gstreamer/tsmf_X11.c:472] -> [channels/tsmf/client/gstreamer/tsmf_X11.c:475]: (warning) Either the condition '!decoder' is redundant or there is possible null pointer dereference: decoder.
[channels/tsmf/client/tsmf_media.c:179] -> [channels/tsmf/client/tsmf_media.c:181]: (warning) Either the condition '!stream' is redundant or there is possible null pointer dereference: stream.
[client/Windows/wf_cliprdr.c:2219] -> [client/Windows/wf_cliprdr.c:2222]: (warning) Either the condition '!formatDataResponse' is redundant or there is possible null pointer dereference: formatDataResponse
[client/Windows/wf_cliprdr.c:2445] -> [client/Windows/wf_cliprdr.c:2448]: (warning) Either the condition '!fileContentsResponse' is redundant or there is possible null pointer dereference: fileContentsResponse.
[client/X11/xf_cliprdr.c:911] -> [client/X11/xf_cliprdr.c:913]: (warning) Either the condition '!clipboard' is redundant or there is possible null pointer dereference: clipboard.
[client/X11/xf_graphics.c:504] -> [client/X11/xf_graphics.c:506]: (warning) Either the condition '!xfc' is redundant or there is possible null pointer dereference: xfc.
[libfreerdp/core/transport.c:861] -> [libfreerdp/core/transport.c:863]: (warning) Either the condition '!transport' is redundant or there is possible null pointer dereference: transport.
[server/shadow/shadow_server.c:777] -> [server/shadow/shadow_server.c:791]: (warning) Either the condition '!server' is redundant or there is possible null pointer dereference: server.
[server/shadow/shadow_server.c:778] -> [server/shadow/shadow_server.c:791]: (warning) Either the condition '!server' is redundant or there is possible null pointer dereference: server.
[server/shadow/shadow_server.c:779] -> [server/shadow/shadow_server.c:791]: (warning) Either the condition '!server' is redundant or there is possible null pointer dereference: server.
[server/shadow/shadow_server.c:781] -> [server/shadow/shadow_server.c:791]: (warning) Either the condition '!server' is redundant or there is possible null pointer dereference: server.
[server/shadow/shadow_server.c:782] -> [server/shadow/shadow_server.c:791]: (warning) Either the condition '!server' is redundant or there is possible null pointer dereference: server.
[server/shadow/shadow_server.c:783] -> [server/shadow/shadow_server.c:791]: (warning) Either the condition '!server' is redundant or there is possible null pointer dereference: server.
[server/shadow/shadow_server.c:784] -> [server/shadow/shadow_server.c:791]: (warning) Either the condition '!server' is redundant or there is possible null pointer dereference: server.
[server/shadow/shadow_server.c:785] -> [server/shadow/shadow_server.c:791]: (warning) Either the condition '!server' is redundant or there is possible null pointer dereference: server.
[server/shadow/shadow_server.c:787] -> [server/shadow/shadow_server.c:791]: (warning) Either the condition '!server' is redundant or there is possible null pointer dereference: server.
[server/shadow/shadow_server.c:789] -> [server/shadow/shadow_server.c:791]: (warning) Either the condition '!server' is redundant or there is possible null pointer dereference: server.
- fixed invalid, missing or additional arguments
- removed all type casts from arguments
- added missing (void*) typecasts for %p arguments
- use inttypes defines where appropriate
FreeRDP/client/common/client.c: In function ‘freerdp_client_context_new’:
FreeRDP/client/common/client.c:86:38: warning: passing argument 1 of ‘freerdp_register_addin_provider’ from incompatible pointer type
if (freerdp_register_addin_provider(freerdp_channels_load_static_addin_entry,
FreeRDP/include/freerdp/addin.h:60:17: note: expected ‘FREERDP_LOAD_CHANNEL_ADDIN_ENTRY_FN’ but argument is of type ‘void * (*)(const CHAR *, CHAR *, CHAR *, DWORD)’
FREERDP_API int freerdp_register_addin_provider(
In file included from FreeRDP/client/common/compatibility.c:27:0:
FreeRDP/include/freerdp/addin.h:60:17: note: expected ‘FREERDP_LOAD_CHANNEL_ADDIN_ENTRY_FN’ but argument is of type ‘void * (*)(const CHAR *, CHAR *, CHAR *, DWORD)’
FREERDP_API int freerdp_register_addin_provider(
gcc (Debian 4.9.2-10) 4.9.2
Global static variables do not work, if more than one instance
of an RDP client is running in the same process space.
Removed the varaibles where possible and replaced them with
thread local storage where necessary.
Function pa_stream_trigger has to be called under lock to avoid
following crashes on asserts:
Assertion 'e->mainloop->n_enabled_defer_events > 0' failed at pulse/mainloop.c:257, function mainloop_defer_enable(). Aborting.
Assertion '!e->next' failed at pulsecore/queue.c:104, function pa_queue_pop(). Aborting.
Assertion 'q->front' failed at pulsecore/queue.c:81, function pa_queue_push(). Aborting.
Not use sizeof on packet memory structure for stream length check/estimating and use number directly.
Most of the packet size could be obviously calculated/verified from code and comments in same function.
Macro is defined for those were referenced multiple times.
1. Fix style for channels/rdpgfx/server/rdpgfx_main.c according to scripts/format_code.sh
2. Refactor and introduce APIs to allow rdpgfx server channel running in existing thread (similar to rdpsnd)
1. Fix stream leak in rdpgfx
2. Make src data const in zgfx. Harden zgfx to be independent to byte order
3. Fix written bytes return value in channel write
4. Add check for return value in shadow_client.c
5. Add gfx callback to send surface command with frame marker pdu.
6. Check remain length for recv subroutine
7. Fix compile errors
When no shared libs are built is required to export all generated
archive files otherwise programs linking against
freerdp-client/freerdp-server might miss symbols.
Fixes#3350
