dynamic channels can be opened at any time during a session. If we
receive a CREATE_REQUEST_PDU and the channel id is already in use, print
out a warning with the existing channel details and discard it before
creating the newly requested channel.
CertificateContent and PrivateKeyContent now have two valid formats:
It can be in format PEM (multiple lines) or a single line base64 encoded
PEM.
The first format is preferrable in case the pf_config* API is used to
set the certificate/key, the latter in case an actual config file is in
use where multiline configuration data can not be directly entered.
The decoded base64 data might contain PEM with/without/with multiple
'\0' at the end of the string. We do not want to drag this through our
code so ensure the length matches the string length including '\0'
Currently the proxy's TLS fallback if an NLA connection attempt failed
is broken. There are two issues with the current code that this PR
fixes:
- freerdp_reconnect is used which requires an already established
connection to work correctly. This is not the case since the NLA
connectin attempt failed. This resulted in a seemingly working TLS
connection but i.e. channels where missing/not working.
- The fallback connection attempt just altered the NLA security setting
in the instance's settings. However these settings have been already
modified by the NLA connection attempt so we need to create a copy of
the original connection settings before doing the first connect.
The PR also introduces freerdp_reset_context which restores the initial
connection settings for the given instance.
__LINE__ is not particularily well defined (most fall back to int).
We want to ensure that all the uses in a format string match the format
specifier, so do an explicit cast
This patch introduce the basic architecture to intercept content of dynamic
channel. When a dynamic channel is in intercept mode, we accumulate and reassemble
the current packet so that it can be passed for inspection.
When some channels are filtered, some misalignement of channel ids could happen.
This patch keeps track of the back and front channel ids to correctly identify a
channel and send packets with the correct channel id.
Previously smartcard authentication was only supported with TLS
connections so the proxy forced that security mode.
Since we now have a working NLA smartcard auth implementation we can
remove that code and leave the correct configuration to the proxy user.
The cmd parameter (type int) has been logged using the %s format
specifier causing an access violation.
Fixed by using get_packet_type to convert cmd to a string.
* Fixed format strings to match arguments
Reviewed and replaced all %d specifiers to match proper type
* Added proxy dynamic channel command type to log messages.
During tests I sometimes received DATA_FIRST_PDUs that were not part of
a fragmented message but contained a complete PDU.
The documentation is not quite clear about if this is a possible
scenario or a protocol violation. However in the description of the Data
field it says:
If the sum of the DVC header size and the value specified by the Length
field is less than 1600 bytes, then the actual data length equals the
value specified by the Length field.
This hints that DATA_FIRST_PDU might also contain complete Data and does
not necessarily mean to be the first part of a fragmented PDU.
Only the least significant bit is valid in the unicode flag UINT32. Some
clients send garbage data in the other bits which caused the proxy to
drop the connection which is wrong.
This big patch fixes fragmentation handling in the dynamic channel. We used to
have a single state to handle fragmentation at the main dynamic channel level, but
in fact packets can be fragmented per sub channel. So we have to maintain a fragmentation
state per sub channel, this involve treating dynamic and static channels differentely
(so the size of the patch that has to implement state tracking per dynamic channels).
This adds a User, Domain and Password parameter in the Target section of the configuration
to specify and use a fixed backend user, domain or password (overriding the one
passed by the front user).
* Fixed remdesk settings pointer
* Fixed sign warnings in display_write_monitor_layout_pdu
* Use freerdp_abort_connect_context and freerdp_shall_disconnect_context
* Added and updates settings
* info assert/dynamic timezone
* mcs assert/log/flags
* Fixed and added assertions for wStream
* Unified stream length checks
* Added new function to check for lenght and log
* Replace all usages with this new function
* Cleaned up PER, added parser logging
* Cleaned up BER, added parser logging
* log messages
* Modified Stream_CheckAndLogRequiredLengthEx
* Allow custom format and options
* Add Stream_CheckAndLogRequiredLengthExVa for prepared va_list
* Improved Stream_CheckAndLogRequiredLength
* Now have log level adjustable
* Added function equivalents for existing logger
* Added a backtrace in case of a failure is detected
* Fixed public API input checks
The rework introduce a stateful dynamic channel treatment, so that we can take early decisions
for data packet (dropping all the current packet or pass it), but also reassemble important
packets like channel creation.
* Fixed GetFileInformationByHandle initializers
* Fix#7793: Do not expose internal input API
Slow-Path input uses UINT16 for scancodes on wire, but only the
lower byte is actually used. (the extended fields are sent in
keyboardFlags field)
Hide this implementation detail and adjust the API to use UINT8
for the code instead just like the corresponding Fast-Path PDU
* Added a warning for problematic slow path keyCodes
The flag was forcing the remoteApp usage when set, while all the other equivalent
flags just enable the feature. This patch fixes that, so now setting RemoteApp = TRUE
just enables the front client to do remoteApps.
Building client channels out of tree does not work reliable as the
dependencies can not be easily split. (exceptions may be simple ones
as echo channel)
It does complicate the build system and code though, so remove this
for maintainability reasons.
This PR introduces per channel context so that we can speed up operations like
retrieving the channel name from its id, or knowing what shall be done for a
packet (no config ACL recomputation at each packet).
* Fix pf_server_new: pass own copy of proxyConfig
The lifecycle of proxyConfig passed to pf_server_new is unknown,
so pass proxyServer->config copy to modules.
* Early free parsed proxyConfig
The proxy server component might receive input related events
before the proxy client has established the connection to the
target machine.
With this change, the current keyboard state is cached and sent
to the target when it is ready. All input events received before
the target is ready are discarded.
* Split out proxy headers and moved to public API to allow external
modules to be built.
* Split proxy into proxy library and proxy binary. The library
can be used by other applications and provides a simple API
* Improved channel passthrough, now all channels including dynamic
channels work.
* Extended module API to hook more events, improved module samples
* Cleaned up proxy code, removed global static variables used,
added WINPR_ASSERT
RDPSND channel is special, as it has many names.
(e.g. static channel, dynamic channel and UDP one.
Use RDPSND_CHANNEL_NAME to identify the module name instad of
RDPSND_DVC_CHANNEL_NAME
