FreeRDP/client/X11/xf_rail.c

669 lines
20 KiB
C
Raw Normal View History

/**
2012-10-09 07:02:04 +04:00
* FreeRDP: A Remote Desktop Protocol Implementation
* X11 RAIL
*
* Copyright 2011 Marc-Andre Moreau <marcandre.moreau@gmail.com>
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <X11/Xlib.h>
#include <X11/Xutil.h>
#include <winpr/wlog.h>
#include <freerdp/utils/event.h>
2014-09-12 19:13:01 +04:00
#include <winpr/print.h>
#include <freerdp/utils/rail.h>
#include <freerdp/rail/rail.h>
#include "xf_window.h"
#include "xf_rail.h"
2014-09-12 19:13:01 +04:00
#define TAG CLIENT_TAG("x11")
#ifdef WITH_DEBUG_X11_LOCAL_MOVESIZE
2014-09-12 19:13:01 +04:00
#define DEBUG_X11_LMS(fmt, ...) WLog_DBG(TAG, fmt, ## __VA_ARGS__)
#else
2014-09-12 19:13:01 +04:00
#define DEBUG_X11_LMS(fmt, ...) do { } while (0)
#endif
2014-08-18 21:34:47 +04:00
void xf_rail_enable_remoteapp_mode(xfContext* xfc)
xfreerdp: a quick workaround for some issues with TS Remote App. Currently in Remote App mode we have no option to interact with the remote desktop host before the first RAIL window is created. In many situations this interaction possibility is absolutely required. One example is that screen which gets displayed if another user is logged on. It requires clicking a button in pre-RAIL mode so that the currently logged on user gets notified to confirm or deny the connection. Another example is the option to log on graphically (e.g. for hosts that don't support NLA) without predefined credentials. Also if the administrator sets the "User must change password at next logon" option there is currently no way to do this in TS Remote App mode. This change basically lets xfreerdp create the main window in Remote App mode like in a normal session and xfi->remote_app is not set to true initially. As soon as the rail exec result event or the first rail window creation request is received (whatever comes first) the main window gets destroyed and xfi->remote_app is set to true. The second change is to disconnect immediately if the rail exec result event reports an error, e.g. if the specified app cannot be found or if it is not in the list of allowed applications. This fixes FreeRDP github issue #143 and issue #308. I'm aware that this is not the most elegant solution but it is definitely an improvement and probably good enough for 1.0. A nicer solution would be hiding the main window and only displaying it if no rail exec result or rail window creation event is received after a certain timeout ...
2012-01-02 13:27:04 +04:00
{
if (!xfc->remote_app)
xfreerdp: a quick workaround for some issues with TS Remote App. Currently in Remote App mode we have no option to interact with the remote desktop host before the first RAIL window is created. In many situations this interaction possibility is absolutely required. One example is that screen which gets displayed if another user is logged on. It requires clicking a button in pre-RAIL mode so that the currently logged on user gets notified to confirm or deny the connection. Another example is the option to log on graphically (e.g. for hosts that don't support NLA) without predefined credentials. Also if the administrator sets the "User must change password at next logon" option there is currently no way to do this in TS Remote App mode. This change basically lets xfreerdp create the main window in Remote App mode like in a normal session and xfi->remote_app is not set to true initially. As soon as the rail exec result event or the first rail window creation request is received (whatever comes first) the main window gets destroyed and xfi->remote_app is set to true. The second change is to disconnect immediately if the rail exec result event reports an error, e.g. if the specified app cannot be found or if it is not in the list of allowed applications. This fixes FreeRDP github issue #143 and issue #308. I'm aware that this is not the most elegant solution but it is definitely an improvement and probably good enough for 1.0. A nicer solution would be hiding the main window and only displaying it if no rail exec result or rail window creation event is received after a certain timeout ...
2012-01-02 13:27:04 +04:00
{
xfc->remote_app = TRUE;
xfc->drawable = DefaultRootWindow(xfc->display);
xf_DestroyWindow(xfc, xfc->window);
xfc->window = NULL;
xfreerdp: a quick workaround for some issues with TS Remote App. Currently in Remote App mode we have no option to interact with the remote desktop host before the first RAIL window is created. In many situations this interaction possibility is absolutely required. One example is that screen which gets displayed if another user is logged on. It requires clicking a button in pre-RAIL mode so that the currently logged on user gets notified to confirm or deny the connection. Another example is the option to log on graphically (e.g. for hosts that don't support NLA) without predefined credentials. Also if the administrator sets the "User must change password at next logon" option there is currently no way to do this in TS Remote App mode. This change basically lets xfreerdp create the main window in Remote App mode like in a normal session and xfi->remote_app is not set to true initially. As soon as the rail exec result event or the first rail window creation request is received (whatever comes first) the main window gets destroyed and xfi->remote_app is set to true. The second change is to disconnect immediately if the rail exec result event reports an error, e.g. if the specified app cannot be found or if it is not in the list of allowed applications. This fixes FreeRDP github issue #143 and issue #308. I'm aware that this is not the most elegant solution but it is definitely an improvement and probably good enough for 1.0. A nicer solution would be hiding the main window and only displaying it if no rail exec result or rail window creation event is received after a certain timeout ...
2012-01-02 13:27:04 +04:00
}
}
2014-08-18 21:34:47 +04:00
void xf_rail_disable_remoteapp_mode(xfContext* xfc)
Multiple RAIL fixes/improvements 1. Linked Window Manager Maximize/Minimize and Restore operations to those from the Server Rail Window so that they are in sync 2. Enable things like "CTRL-ALT-DELETE" and "WindowsKey-L" to show the full desktop window again since the desktop is not actively monitored since this was still trying to draw to the rail window without updating the size of the window to accomodate the full workspace area. 3. Changed local window coordinates to be based on the visibileOffsetX/Y- while moving server window based on WindowOffsetX/Y. I have seen various issues regarding this when trying to use a maximized window where this is a disconnect between local window coordinates and remote window coordinates. This change clears these things up. 4. Commented the XShapeCombineRectangles calls - this can cause issues where the entire window is not visible and it does not currently play well with the changes from #3. The gain here is greater than the loss. 5. Draw the initial workspace correctly when running across multiple monitors. The correct size was always used, but the window was only starting on the current monitor and thus could draw the window off of the viewable area. Known Issues: Although the changes for #2 worked well in the stable branch that I developed from - the desktop window shown once the rail windows are destroyed does not respond to input unless I minimize/restore the window. Once the window starts responding to input - you can hit cancel to close the desktop window and return to your rail windows again(or launch task manager, etc.). This is still a big step in the right direction as xfreerdp is now correctly acting when the rail server stops Actively Monitoring the desktop. XShapeCombineRectangles needs to be revisited, most windows applications will give you a rectangular window anyways.
2012-08-04 02:35:17 +04:00
{
if (xfc->remote_app)
2012-08-14 23:59:11 +04:00
{
xfc->remote_app = FALSE;
xf_create_window(xfc);
2012-08-14 23:59:11 +04:00
}
Multiple RAIL fixes/improvements 1. Linked Window Manager Maximize/Minimize and Restore operations to those from the Server Rail Window so that they are in sync 2. Enable things like "CTRL-ALT-DELETE" and "WindowsKey-L" to show the full desktop window again since the desktop is not actively monitored since this was still trying to draw to the rail window without updating the size of the window to accomodate the full workspace area. 3. Changed local window coordinates to be based on the visibileOffsetX/Y- while moving server window based on WindowOffsetX/Y. I have seen various issues regarding this when trying to use a maximized window where this is a disconnect between local window coordinates and remote window coordinates. This change clears these things up. 4. Commented the XShapeCombineRectangles calls - this can cause issues where the entire window is not visible and it does not currently play well with the changes from #3. The gain here is greater than the loss. 5. Draw the initial workspace correctly when running across multiple monitors. The correct size was always used, but the window was only starting on the current monitor and thus could draw the window off of the viewable area. Known Issues: Although the changes for #2 worked well in the stable branch that I developed from - the desktop window shown once the rail windows are destroyed does not respond to input unless I minimize/restore the window. Once the window starts responding to input - you can hit cancel to close the desktop window and return to your rail windows again(or launch task manager, etc.). This is still a big step in the right direction as xfreerdp is now correctly acting when the rail server stops Actively Monitoring the desktop. XShapeCombineRectangles needs to be revisited, most windows applications will give you a rectangular window anyways.
2012-08-04 02:35:17 +04:00
}
2014-08-18 21:34:47 +04:00
void xf_rail_paint(xfContext* xfc, rdpRail* rail, INT32 uleft, INT32 utop, UINT32 uright, UINT32 ubottom)
{
2014-08-18 21:34:47 +04:00
xfWindow* xfw;
rdpWindow* window;
BOOL intersect;
2012-10-09 11:26:39 +04:00
UINT32 iwidth, iheight;
INT32 ileft, itop;
UINT32 iright, ibottom;
INT32 wleft, wtop;
2012-10-09 11:26:39 +04:00
UINT32 wright, wbottom;
window_list_rewind(rail->list);
while (window_list_has_next(rail->list))
{
window = window_list_get_next(rail->list);
2014-08-18 21:34:47 +04:00
xfw = (xfWindow*) window->extra;
/* RDP can have zero width or height windows. X cannot, so we ignore these. */
if ((window->windowWidth == 0) || (window->windowHeight == 0))
{
continue;
}
Multiple RAIL fixes/improvements 1. Linked Window Manager Maximize/Minimize and Restore operations to those from the Server Rail Window so that they are in sync 2. Enable things like "CTRL-ALT-DELETE" and "WindowsKey-L" to show the full desktop window again since the desktop is not actively monitored since this was still trying to draw to the rail window without updating the size of the window to accomodate the full workspace area. 3. Changed local window coordinates to be based on the visibileOffsetX/Y- while moving server window based on WindowOffsetX/Y. I have seen various issues regarding this when trying to use a maximized window where this is a disconnect between local window coordinates and remote window coordinates. This change clears these things up. 4. Commented the XShapeCombineRectangles calls - this can cause issues where the entire window is not visible and it does not currently play well with the changes from #3. The gain here is greater than the loss. 5. Draw the initial workspace correctly when running across multiple monitors. The correct size was always used, but the window was only starting on the current monitor and thus could draw the window off of the viewable area. Known Issues: Although the changes for #2 worked well in the stable branch that I developed from - the desktop window shown once the rail windows are destroyed does not respond to input unless I minimize/restore the window. Once the window starts responding to input - you can hit cancel to close the desktop window and return to your rail windows again(or launch task manager, etc.). This is still a big step in the right direction as xfreerdp is now correctly acting when the rail server stops Actively Monitoring the desktop. XShapeCombineRectangles needs to be revisited, most windows applications will give you a rectangular window anyways.
2012-08-04 02:35:17 +04:00
wleft = window->visibleOffsetX;
wtop = window->visibleOffsetY;
wright = window->visibleOffsetX + window->windowWidth - 1;
wbottom = window->visibleOffsetY + window->windowHeight - 1;
ileft = MAX(uleft, wleft);
itop = MAX(utop, wtop);
iright = MIN(uright, wright);
ibottom = MIN(ubottom, wbottom);
iwidth = iright - ileft + 1;
iheight = ibottom - itop + 1;
intersect = ((iright > ileft) && (ibottom > itop)) ? TRUE : FALSE;
if (intersect)
{
xf_UpdateWindowArea(xfc, xfw, ileft - wleft, itop - wtop, iwidth, iheight);
}
}
}
2014-08-18 21:34:47 +04:00
void xf_rail_DesktopNonMonitored(rdpRail* rail, rdpWindow* window)
Multiple RAIL fixes/improvements 1. Linked Window Manager Maximize/Minimize and Restore operations to those from the Server Rail Window so that they are in sync 2. Enable things like "CTRL-ALT-DELETE" and "WindowsKey-L" to show the full desktop window again since the desktop is not actively monitored since this was still trying to draw to the rail window without updating the size of the window to accomodate the full workspace area. 3. Changed local window coordinates to be based on the visibileOffsetX/Y- while moving server window based on WindowOffsetX/Y. I have seen various issues regarding this when trying to use a maximized window where this is a disconnect between local window coordinates and remote window coordinates. This change clears these things up. 4. Commented the XShapeCombineRectangles calls - this can cause issues where the entire window is not visible and it does not currently play well with the changes from #3. The gain here is greater than the loss. 5. Draw the initial workspace correctly when running across multiple monitors. The correct size was always used, but the window was only starting on the current monitor and thus could draw the window off of the viewable area. Known Issues: Although the changes for #2 worked well in the stable branch that I developed from - the desktop window shown once the rail windows are destroyed does not respond to input unless I minimize/restore the window. Once the window starts responding to input - you can hit cancel to close the desktop window and return to your rail windows again(or launch task manager, etc.). This is still a big step in the right direction as xfreerdp is now correctly acting when the rail server stops Actively Monitoring the desktop. XShapeCombineRectangles needs to be revisited, most windows applications will give you a rectangular window anyways.
2012-08-04 02:35:17 +04:00
{
2014-08-18 21:34:47 +04:00
xfContext* xfc;
xfc = (xfContext*) rail->extra;
xf_rail_disable_remoteapp_mode(xfc);
Multiple RAIL fixes/improvements 1. Linked Window Manager Maximize/Minimize and Restore operations to those from the Server Rail Window so that they are in sync 2. Enable things like "CTRL-ALT-DELETE" and "WindowsKey-L" to show the full desktop window again since the desktop is not actively monitored since this was still trying to draw to the rail window without updating the size of the window to accomodate the full workspace area. 3. Changed local window coordinates to be based on the visibileOffsetX/Y- while moving server window based on WindowOffsetX/Y. I have seen various issues regarding this when trying to use a maximized window where this is a disconnect between local window coordinates and remote window coordinates. This change clears these things up. 4. Commented the XShapeCombineRectangles calls - this can cause issues where the entire window is not visible and it does not currently play well with the changes from #3. The gain here is greater than the loss. 5. Draw the initial workspace correctly when running across multiple monitors. The correct size was always used, but the window was only starting on the current monitor and thus could draw the window off of the viewable area. Known Issues: Although the changes for #2 worked well in the stable branch that I developed from - the desktop window shown once the rail windows are destroyed does not respond to input unless I minimize/restore the window. Once the window starts responding to input - you can hit cancel to close the desktop window and return to your rail windows again(or launch task manager, etc.). This is still a big step in the right direction as xfreerdp is now correctly acting when the rail server stops Actively Monitoring the desktop. XShapeCombineRectangles needs to be revisited, most windows applications will give you a rectangular window anyways.
2012-08-04 02:35:17 +04:00
}
2014-08-18 21:34:47 +04:00
static void xf_rail_CreateWindow(rdpRail* rail, rdpWindow* window)
{
2014-08-18 21:34:47 +04:00
xfContext* xfc;
xfWindow* xfw;
xfc = (xfContext*) rail->extra;
xf_rail_enable_remoteapp_mode(xfc);
xfw = xf_CreateWindow(xfc, window,
window->windowOffsetX, window->windowOffsetY,
window->windowWidth, window->windowHeight, window->windowId);
xf_SetWindowStyle(xfc, xfw, window->style, window->extendedStyle);
xf_SetWindowText(xfc, xfw, window->title);
2014-08-18 21:34:47 +04:00
window->extra = (void*) xfw;
window->extraId = (void*) xfw->handle;
}
2014-08-18 21:34:47 +04:00
static void xf_rail_MoveWindow(rdpRail* rail, rdpWindow* window)
{
2014-08-18 21:34:47 +04:00
xfContext* xfc;
xfWindow* xfw;
xfc = (xfContext*) rail->extra;
xfw = (xfWindow*) window->extra;
/*
* The rail server like to set the window to a small size when it is minimized even though it is hidden
* in some cases this can cause the window not to restore back to its original size. Therefore we don't
* update our local window when that rail window state is minimized
*/
Multiple RAIL fixes/improvements 1. Linked Window Manager Maximize/Minimize and Restore operations to those from the Server Rail Window so that they are in sync 2. Enable things like "CTRL-ALT-DELETE" and "WindowsKey-L" to show the full desktop window again since the desktop is not actively monitored since this was still trying to draw to the rail window without updating the size of the window to accomodate the full workspace area. 3. Changed local window coordinates to be based on the visibileOffsetX/Y- while moving server window based on WindowOffsetX/Y. I have seen various issues regarding this when trying to use a maximized window where this is a disconnect between local window coordinates and remote window coordinates. This change clears these things up. 4. Commented the XShapeCombineRectangles calls - this can cause issues where the entire window is not visible and it does not currently play well with the changes from #3. The gain here is greater than the loss. 5. Draw the initial workspace correctly when running across multiple monitors. The correct size was always used, but the window was only starting on the current monitor and thus could draw the window off of the viewable area. Known Issues: Although the changes for #2 worked well in the stable branch that I developed from - the desktop window shown once the rail windows are destroyed does not respond to input unless I minimize/restore the window. Once the window starts responding to input - you can hit cancel to close the desktop window and return to your rail windows again(or launch task manager, etc.). This is still a big step in the right direction as xfreerdp is now correctly acting when the rail server stops Actively Monitoring the desktop. XShapeCombineRectangles needs to be revisited, most windows applications will give you a rectangular window anyways.
2012-08-04 02:35:17 +04:00
if (xfw->rail_state == WINDOW_SHOW_MINIMIZED)
return;
Multiple RAIL fixes/improvements 1. Linked Window Manager Maximize/Minimize and Restore operations to those from the Server Rail Window so that they are in sync 2. Enable things like "CTRL-ALT-DELETE" and "WindowsKey-L" to show the full desktop window again since the desktop is not actively monitored since this was still trying to draw to the rail window without updating the size of the window to accomodate the full workspace area. 3. Changed local window coordinates to be based on the visibileOffsetX/Y- while moving server window based on WindowOffsetX/Y. I have seen various issues regarding this when trying to use a maximized window where this is a disconnect between local window coordinates and remote window coordinates. This change clears these things up. 4. Commented the XShapeCombineRectangles calls - this can cause issues where the entire window is not visible and it does not currently play well with the changes from #3. The gain here is greater than the loss. 5. Draw the initial workspace correctly when running across multiple monitors. The correct size was always used, but the window was only starting on the current monitor and thus could draw the window off of the viewable area. Known Issues: Although the changes for #2 worked well in the stable branch that I developed from - the desktop window shown once the rail windows are destroyed does not respond to input unless I minimize/restore the window. Once the window starts responding to input - you can hit cancel to close the desktop window and return to your rail windows again(or launch task manager, etc.). This is still a big step in the right direction as xfreerdp is now correctly acting when the rail server stops Actively Monitoring the desktop. XShapeCombineRectangles needs to be revisited, most windows applications will give you a rectangular window anyways.
2012-08-04 02:35:17 +04:00
/* Do nothing if window is already in the correct position */
if (xfw->left == window->visibleOffsetX &&
xfw->top == window->visibleOffsetY &&
xfw->width == window->windowWidth &&
xfw->height == window->windowHeight)
{
/*
* Just ensure entire window area is updated to handle cases where we
* have drawn locally before getting new bitmap from the server
*/
xf_UpdateWindowArea(xfc, xfw, 0, 0, window->windowWidth, window->windowHeight);
return;
}
Multiple RAIL fixes/improvements 1. Linked Window Manager Maximize/Minimize and Restore operations to those from the Server Rail Window so that they are in sync 2. Enable things like "CTRL-ALT-DELETE" and "WindowsKey-L" to show the full desktop window again since the desktop is not actively monitored since this was still trying to draw to the rail window without updating the size of the window to accomodate the full workspace area. 3. Changed local window coordinates to be based on the visibileOffsetX/Y- while moving server window based on WindowOffsetX/Y. I have seen various issues regarding this when trying to use a maximized window where this is a disconnect between local window coordinates and remote window coordinates. This change clears these things up. 4. Commented the XShapeCombineRectangles calls - this can cause issues where the entire window is not visible and it does not currently play well with the changes from #3. The gain here is greater than the loss. 5. Draw the initial workspace correctly when running across multiple monitors. The correct size was always used, but the window was only starting on the current monitor and thus could draw the window off of the viewable area. Known Issues: Although the changes for #2 worked well in the stable branch that I developed from - the desktop window shown once the rail windows are destroyed does not respond to input unless I minimize/restore the window. Once the window starts responding to input - you can hit cancel to close the desktop window and return to your rail windows again(or launch task manager, etc.). This is still a big step in the right direction as xfreerdp is now correctly acting when the rail server stops Actively Monitoring the desktop. XShapeCombineRectangles needs to be revisited, most windows applications will give you a rectangular window anyways.
2012-08-04 02:35:17 +04:00
xf_MoveWindow(xfc, xfw,
window->visibleOffsetX, window->visibleOffsetY,
window->windowWidth, window->windowHeight);
}
2014-08-18 21:34:47 +04:00
static void xf_rail_ShowWindow(rdpRail* rail, rdpWindow* window, BYTE state)
{
2014-08-18 21:34:47 +04:00
xfContext* xfc;
xfWindow* xfw;
xfc = (xfContext*) rail->extra;
xfw = (xfWindow*) window->extra;
xf_ShowWindow(xfc, xfw, state);
}
2014-08-18 21:34:47 +04:00
static void xf_rail_SetWindowText(rdpRail* rail, rdpWindow* window)
{
2014-08-18 21:34:47 +04:00
xfContext* xfc;
xfWindow* xfw;
xfc = (xfContext*) rail->extra;
xfw = (xfWindow*) window->extra;
xf_SetWindowText(xfc, xfw, window->title);
}
2014-08-18 21:34:47 +04:00
static void xf_rail_SetWindowIcon(rdpRail* rail, rdpWindow* window, rdpIcon* icon)
{
2014-08-18 21:34:47 +04:00
xfContext* xfc;
xfWindow* xfw;
xfc = (xfContext*) rail->extra;
xfw = (xfWindow*) window->extra;
icon->extra = freerdp_icon_convert(icon->entry->bitsColor, NULL, icon->entry->bitsMask,
icon->entry->width, icon->entry->height, icon->entry->bpp, rail->clrconv);
xf_SetWindowIcon(xfc, xfw, icon);
}
2014-08-18 21:34:47 +04:00
static void xf_rail_SetWindowRects(rdpRail* rail, rdpWindow* window)
{
2014-08-18 21:34:47 +04:00
xfContext* xfc;
xfWindow* xfw;
xfc = (xfContext*) rail->extra;
xfw = (xfWindow*) window->extra;
xf_SetWindowRects(xfc, xfw, window->windowRects, window->numWindowRects);
}
2014-08-18 21:34:47 +04:00
static void xf_rail_SetWindowVisibilityRects(rdpRail* rail, rdpWindow* window)
{
2014-08-18 21:34:47 +04:00
xfWindow* xfw;
xfContext* xfc;
xfc = (xfContext*) rail->extra;
xfw = (xfWindow*) window->extra;
xf_SetWindowVisibilityRects(xfc, xfw, window->windowRects, window->numWindowRects);
}
2014-08-18 21:34:47 +04:00
static void xf_rail_DestroyWindow(rdpRail* rail, rdpWindow* window)
2011-08-18 06:31:27 +04:00
{
2014-08-18 21:34:47 +04:00
xfWindow* xfw;
xfContext* xfc;
xfc = (xfContext*) rail->extra;
xfw = (xfWindow*) window->extra;
xf_DestroyWindow(xfc, xfw);
2011-08-18 06:31:27 +04:00
}
2014-08-18 21:34:47 +04:00
void xf_rail_register_callbacks(xfContext* xfc, rdpRail* rail)
{
2014-08-18 21:34:47 +04:00
rail->extra = (void*) xfc;
rail->rail_CreateWindow = xf_rail_CreateWindow;
rail->rail_MoveWindow = xf_rail_MoveWindow;
rail->rail_ShowWindow = xf_rail_ShowWindow;
rail->rail_SetWindowText = xf_rail_SetWindowText;
rail->rail_SetWindowIcon = xf_rail_SetWindowIcon;
rail->rail_SetWindowRects = xf_rail_SetWindowRects;
rail->rail_SetWindowVisibilityRects = xf_rail_SetWindowVisibilityRects;
rail->rail_DestroyWindow = xf_rail_DestroyWindow;
Multiple RAIL fixes/improvements 1. Linked Window Manager Maximize/Minimize and Restore operations to those from the Server Rail Window so that they are in sync 2. Enable things like "CTRL-ALT-DELETE" and "WindowsKey-L" to show the full desktop window again since the desktop is not actively monitored since this was still trying to draw to the rail window without updating the size of the window to accomodate the full workspace area. 3. Changed local window coordinates to be based on the visibileOffsetX/Y- while moving server window based on WindowOffsetX/Y. I have seen various issues regarding this when trying to use a maximized window where this is a disconnect between local window coordinates and remote window coordinates. This change clears these things up. 4. Commented the XShapeCombineRectangles calls - this can cause issues where the entire window is not visible and it does not currently play well with the changes from #3. The gain here is greater than the loss. 5. Draw the initial workspace correctly when running across multiple monitors. The correct size was always used, but the window was only starting on the current monitor and thus could draw the window off of the viewable area. Known Issues: Although the changes for #2 worked well in the stable branch that I developed from - the desktop window shown once the rail windows are destroyed does not respond to input unless I minimize/restore the window. Once the window starts responding to input - you can hit cancel to close the desktop window and return to your rail windows again(or launch task manager, etc.). This is still a big step in the right direction as xfreerdp is now correctly acting when the rail server stops Actively Monitoring the desktop. XShapeCombineRectangles needs to be revisited, most windows applications will give you a rectangular window anyways.
2012-08-04 02:35:17 +04:00
rail->rail_DesktopNonMonitored = xf_rail_DesktopNonMonitored;
}
2014-08-18 21:34:47 +04:00
static void xf_on_free_rail_client_event(wMessage* event)
{
rail_free_cloned_order(GetMessageType(event->id), event->wParam);
}
2014-08-18 21:34:47 +04:00
static void xf_send_rail_client_event(rdpChannels* channels, UINT16 event_type, void* param)
{
2014-08-18 21:34:47 +04:00
wMessage* out_event = NULL;
void* payload = NULL;
payload = rail_clone_order(event_type, param);
if (payload != NULL)
{
2013-03-29 03:33:31 +04:00
out_event = freerdp_event_new(RailChannel_Class, event_type,
xf_on_free_rail_client_event, payload);
freerdp_channels_send_event(channels, out_event);
}
}
2014-08-18 21:34:47 +04:00
void xf_rail_send_activate(xfContext* xfc, Window xwindow, BOOL enabled)
{
2014-08-18 21:34:47 +04:00
rdpRail* rail;
rdpChannels* channels;
rdpWindow* rail_window;
RAIL_ACTIVATE_ORDER activate;
2014-08-18 21:34:47 +04:00
rail = ((rdpContext*) xfc)->rail;
channels = ((rdpContext*) xfc)->channels;
rail_window = window_list_get_by_extra_id(rail->list, (void*) xwindow);
if (rail_window == NULL)
return;
activate.windowId = rail_window->windowId;
activate.enabled = enabled;
xf_send_rail_client_event(channels, RailChannel_ClientActivate, &activate);
}
2014-08-18 21:34:47 +04:00
void xf_rail_send_client_system_command(xfContext* xfc, UINT32 windowId, UINT16 command)
{
2014-08-18 21:34:47 +04:00
rdpChannels* channels;
RAIL_SYSCOMMAND_ORDER syscommand;
2014-08-18 21:34:47 +04:00
channels = ((rdpContext*) xfc)->channels;
syscommand.windowId = windowId;
syscommand.command = command;
xf_send_rail_client_event(channels, RailChannel_ClientSystemCommand, &syscommand);
}
/**
* The position of the X window can become out of sync with the RDP window
* if the X window is moved locally by the window manager. In this event
* send an update to the RDP server informing it of the new window position
* and size.
*/
2014-08-18 21:34:47 +04:00
void xf_rail_adjust_position(xfContext* xfc, rdpWindow* window)
{
2014-08-18 21:34:47 +04:00
xfWindow* xfw;
rdpChannels* channels;
RAIL_WINDOW_MOVE_ORDER window_move;
2014-08-18 21:34:47 +04:00
xfw = (xfWindow*) window->extra;
channels = ((rdpContext*) xfc)->channels;
if (! xfw->is_mapped || xfw->local_move.state != LMS_NOT_ACTIVE)
return;
/* If current window position disagrees with RDP window position, send update to RDP server */
if (xfw->left != window->visibleOffsetX ||
xfw->top != window->visibleOffsetY ||
xfw->width != window->windowWidth ||
xfw->height != window->windowHeight)
{
/*
* Although the rail server can give negative window coordinates when updating windowOffsetX and windowOffsetY,
* we can only send unsigned integers to the rail server. Therefore, we always bring negative coordinates up to 0
* when attempting to adjust the rail window.
*/
UINT32 offsetX = 0;
UINT32 offsetY = 0;
if (window->windowOffsetX < 0)
offsetX = offsetX - window->windowOffsetX;
if (window->windowOffsetY < 0)
offsetY = offsetY - window->windowOffsetY;
/*
* windowOffset corresponds to the window location on the rail server
* but our local window is based on the visibleOffset since using the windowOffset
* can result in blank areas for a maximized window
*/
window_move.windowId = window->windowId;
/*
* Calculate new offsets for the rail server window
* Negative offset correction + rail server window offset + (difference in visibleOffset and new window local offset)
*/
window_move.left = offsetX + window->windowOffsetX + (xfw->left - window->visibleOffsetX);
window_move.top = offsetY + window->windowOffsetY + (xfw->top - window->visibleOffsetY);
window_move.right = window_move.left + xfw->width;
window_move.bottom = window_move.top + xfw->height;
DEBUG_X11_LMS("window=0x%X rc={l=%d t=%d r=%d b=%d} w=%u h=%u"
" RDP=0x%X rc={l=%d t=%d} w=%d h=%d",
(UINT32) xfw->handle, window_move.left, window_move.top,
window_move.right, window_move.bottom, xfw->width, xfw->height,
window->windowId,
window->windowOffsetX, window->windowOffsetY,
window->windowWidth, window->windowHeight);
xf_send_rail_client_event(channels, RailChannel_ClientWindowMove, &window_move);
}
}
2014-08-18 21:34:47 +04:00
void xf_rail_end_local_move(xfContext* xfc, rdpWindow* window)
{
2014-08-18 21:34:47 +04:00
xfWindow* xfw;
rdpChannels* channels;
RAIL_WINDOW_MOVE_ORDER window_move;
2014-08-18 21:34:47 +04:00
rdpInput* input = xfc->instance->input;
int x,y;
Window root_window;
Window child_window;
unsigned int mask;
int child_x;
int child_y;
2014-08-18 21:34:47 +04:00
xfw = (xfWindow*) window->extra;
channels = ((rdpContext*) xfc)->channels;
DEBUG_X11_LMS("window=0x%X rc={l=%d t=%d r=%d b=%d} w=%d h=%d",
(UINT32) xfw->handle,
xfw->left, xfw->top, xfw->right, xfw->bottom,
xfw->width, xfw->height);
/*
* Although the rail server can give negative window coordinates when updating windowOffsetX and windowOffsetY,
* we can only send unsigned integers to the rail server. Therefore, we always bring negative coordinates up to 0 when
* attempting to adjust the rail window.
*/
2012-10-09 11:26:39 +04:00
UINT32 offsetX = 0;
UINT32 offsetY = 0;
Multiple RAIL fixes/improvements 1. Linked Window Manager Maximize/Minimize and Restore operations to those from the Server Rail Window so that they are in sync 2. Enable things like "CTRL-ALT-DELETE" and "WindowsKey-L" to show the full desktop window again since the desktop is not actively monitored since this was still trying to draw to the rail window without updating the size of the window to accomodate the full workspace area. 3. Changed local window coordinates to be based on the visibileOffsetX/Y- while moving server window based on WindowOffsetX/Y. I have seen various issues regarding this when trying to use a maximized window where this is a disconnect between local window coordinates and remote window coordinates. This change clears these things up. 4. Commented the XShapeCombineRectangles calls - this can cause issues where the entire window is not visible and it does not currently play well with the changes from #3. The gain here is greater than the loss. 5. Draw the initial workspace correctly when running across multiple monitors. The correct size was always used, but the window was only starting on the current monitor and thus could draw the window off of the viewable area. Known Issues: Although the changes for #2 worked well in the stable branch that I developed from - the desktop window shown once the rail windows are destroyed does not respond to input unless I minimize/restore the window. Once the window starts responding to input - you can hit cancel to close the desktop window and return to your rail windows again(or launch task manager, etc.). This is still a big step in the right direction as xfreerdp is now correctly acting when the rail server stops Actively Monitoring the desktop. XShapeCombineRectangles needs to be revisited, most windows applications will give you a rectangular window anyways.
2012-08-04 02:35:17 +04:00
if (window->windowOffsetX < 0)
offsetX = offsetX - window->windowOffsetX;
Multiple RAIL fixes/improvements 1. Linked Window Manager Maximize/Minimize and Restore operations to those from the Server Rail Window so that they are in sync 2. Enable things like "CTRL-ALT-DELETE" and "WindowsKey-L" to show the full desktop window again since the desktop is not actively monitored since this was still trying to draw to the rail window without updating the size of the window to accomodate the full workspace area. 3. Changed local window coordinates to be based on the visibileOffsetX/Y- while moving server window based on WindowOffsetX/Y. I have seen various issues regarding this when trying to use a maximized window where this is a disconnect between local window coordinates and remote window coordinates. This change clears these things up. 4. Commented the XShapeCombineRectangles calls - this can cause issues where the entire window is not visible and it does not currently play well with the changes from #3. The gain here is greater than the loss. 5. Draw the initial workspace correctly when running across multiple monitors. The correct size was always used, but the window was only starting on the current monitor and thus could draw the window off of the viewable area. Known Issues: Although the changes for #2 worked well in the stable branch that I developed from - the desktop window shown once the rail windows are destroyed does not respond to input unless I minimize/restore the window. Once the window starts responding to input - you can hit cancel to close the desktop window and return to your rail windows again(or launch task manager, etc.). This is still a big step in the right direction as xfreerdp is now correctly acting when the rail server stops Actively Monitoring the desktop. XShapeCombineRectangles needs to be revisited, most windows applications will give you a rectangular window anyways.
2012-08-04 02:35:17 +04:00
if (window->windowOffsetY < 0)
offsetY = offsetY - window->windowOffsetY;
Multiple RAIL fixes/improvements 1. Linked Window Manager Maximize/Minimize and Restore operations to those from the Server Rail Window so that they are in sync 2. Enable things like "CTRL-ALT-DELETE" and "WindowsKey-L" to show the full desktop window again since the desktop is not actively monitored since this was still trying to draw to the rail window without updating the size of the window to accomodate the full workspace area. 3. Changed local window coordinates to be based on the visibileOffsetX/Y- while moving server window based on WindowOffsetX/Y. I have seen various issues regarding this when trying to use a maximized window where this is a disconnect between local window coordinates and remote window coordinates. This change clears these things up. 4. Commented the XShapeCombineRectangles calls - this can cause issues where the entire window is not visible and it does not currently play well with the changes from #3. The gain here is greater than the loss. 5. Draw the initial workspace correctly when running across multiple monitors. The correct size was always used, but the window was only starting on the current monitor and thus could draw the window off of the viewable area. Known Issues: Although the changes for #2 worked well in the stable branch that I developed from - the desktop window shown once the rail windows are destroyed does not respond to input unless I minimize/restore the window. Once the window starts responding to input - you can hit cancel to close the desktop window and return to your rail windows again(or launch task manager, etc.). This is still a big step in the right direction as xfreerdp is now correctly acting when the rail server stops Actively Monitoring the desktop. XShapeCombineRectangles needs to be revisited, most windows applications will give you a rectangular window anyways.
2012-08-04 02:35:17 +04:00
/*
* For keyboard moves send and explicit update to RDP server
*/
window_move.windowId = window->windowId;
/*
* Calculate new offsets for the rail server window
* Negative offset correction + rail server window offset + (difference in visibleOffset and new window local offset)
*/
window_move.left = offsetX + window->windowOffsetX + (xfw->left - window->visibleOffsetX);
window_move.top = offsetY + window->windowOffsetY + (xfw->top - window->visibleOffsetY);
window_move.right = window_move.left + xfw->width; /* In the update to RDP the position is one past the window */
window_move.bottom = window_move.top + xfw->height;
xf_send_rail_client_event(channels, RailChannel_ClientWindowMove, &window_move);
/*
* Simulate button up at new position to end the local move (per RDP spec)
*/
XQueryPointer(xfc->display, xfw->handle,
&root_window, &child_window,
&x, &y, &child_x, &child_y, &mask);
input->MouseEvent(input, PTR_FLAGS_BUTTON1, x, y);
Multiple RAIL fixes/improvements 1. Linked Window Manager Maximize/Minimize and Restore operations to those from the Server Rail Window so that they are in sync 2. Enable things like "CTRL-ALT-DELETE" and "WindowsKey-L" to show the full desktop window again since the desktop is not actively monitored since this was still trying to draw to the rail window without updating the size of the window to accomodate the full workspace area. 3. Changed local window coordinates to be based on the visibileOffsetX/Y- while moving server window based on WindowOffsetX/Y. I have seen various issues regarding this when trying to use a maximized window where this is a disconnect between local window coordinates and remote window coordinates. This change clears these things up. 4. Commented the XShapeCombineRectangles calls - this can cause issues where the entire window is not visible and it does not currently play well with the changes from #3. The gain here is greater than the loss. 5. Draw the initial workspace correctly when running across multiple monitors. The correct size was always used, but the window was only starting on the current monitor and thus could draw the window off of the viewable area. Known Issues: Although the changes for #2 worked well in the stable branch that I developed from - the desktop window shown once the rail windows are destroyed does not respond to input unless I minimize/restore the window. Once the window starts responding to input - you can hit cancel to close the desktop window and return to your rail windows again(or launch task manager, etc.). This is still a big step in the right direction as xfreerdp is now correctly acting when the rail server stops Actively Monitoring the desktop. XShapeCombineRectangles needs to be revisited, most windows applications will give you a rectangular window anyways.
2012-08-04 02:35:17 +04:00
/* only send the mouse coordinates if not a keyboard move or size */
Multiple RAIL fixes/improvements 1. Linked Window Manager Maximize/Minimize and Restore operations to those from the Server Rail Window so that they are in sync 2. Enable things like "CTRL-ALT-DELETE" and "WindowsKey-L" to show the full desktop window again since the desktop is not actively monitored since this was still trying to draw to the rail window without updating the size of the window to accomodate the full workspace area. 3. Changed local window coordinates to be based on the visibileOffsetX/Y- while moving server window based on WindowOffsetX/Y. I have seen various issues regarding this when trying to use a maximized window where this is a disconnect between local window coordinates and remote window coordinates. This change clears these things up. 4. Commented the XShapeCombineRectangles calls - this can cause issues where the entire window is not visible and it does not currently play well with the changes from #3. The gain here is greater than the loss. 5. Draw the initial workspace correctly when running across multiple monitors. The correct size was always used, but the window was only starting on the current monitor and thus could draw the window off of the viewable area. Known Issues: Although the changes for #2 worked well in the stable branch that I developed from - the desktop window shown once the rail windows are destroyed does not respond to input unless I minimize/restore the window. Once the window starts responding to input - you can hit cancel to close the desktop window and return to your rail windows again(or launch task manager, etc.). This is still a big step in the right direction as xfreerdp is now correctly acting when the rail server stops Actively Monitoring the desktop. XShapeCombineRectangles needs to be revisited, most windows applications will give you a rectangular window anyways.
2012-08-04 02:35:17 +04:00
if ((xfw->local_move.direction != _NET_WM_MOVERESIZE_MOVE_KEYBOARD) &&
(xfw->local_move.direction != _NET_WM_MOVERESIZE_SIZE_KEYBOARD))
{
input->MouseEvent(input, PTR_FLAGS_BUTTON1, x, y);
DEBUG_X11_LMS("Mouse coordinates. x= %i, y= %i", x, y);
}
/*
* Proactively update the RAIL window dimensions. There is a race condition where
* we can start to receive GDI orders for the new window dimensions before we
* receive the RAIL ORDER for the new window size. This avoids that race condition.
*/
window->windowOffsetX = offsetX + window->windowOffsetX + (xfw->left - window->visibleOffsetX);
window->windowOffsetY = offsetY + window->windowOffsetY + (xfw->top - window->visibleOffsetY);
window->windowWidth = xfw->width;
window->windowHeight = xfw->height;
xfw->local_move.state = LMS_TERMINATING;
}
2014-08-18 21:34:47 +04:00
void xf_process_rail_get_sysparams_event(xfContext* xfc, rdpChannels* channels, wMessage* event)
{
2014-08-18 21:34:47 +04:00
RAIL_SYSPARAM_ORDER* sysparam;
sysparam = (RAIL_SYSPARAM_ORDER*) event->wParam;
sysparam->workArea.left = xfc->workArea.x;
sysparam->workArea.top = xfc->workArea.y;
sysparam->workArea.right = xfc->workArea.x + xfc->workArea.width;
sysparam->workArea.bottom = xfc->workArea.y + xfc->workArea.height;
sysparam->taskbarPos.left = 0;
sysparam->taskbarPos.top = 0;
sysparam->taskbarPos.right = 0;
sysparam->taskbarPos.bottom = 0;
sysparam->dragFullWindows = FALSE;
xf_send_rail_client_event(channels, RailChannel_ClientSystemParam, sysparam);
}
2014-08-18 21:34:47 +04:00
const char* error_code_names[] =
{
"RAIL_EXEC_S_OK",
"RAIL_EXEC_E_HOOK_NOT_LOADED",
"RAIL_EXEC_E_DECODE_FAILED",
"RAIL_EXEC_E_NOT_IN_ALLOWLIST",
"RAIL_EXEC_E_FILE_NOT_FOUND",
"RAIL_EXEC_E_FAIL",
"RAIL_EXEC_E_SESSION_LOCKED"
};
2014-08-18 21:34:47 +04:00
void xf_process_rail_exec_result_event(xfContext* xfc, rdpChannels* channels, wMessage* event)
{
2014-08-18 21:34:47 +04:00
RAIL_EXEC_RESULT_ORDER* exec_result;
exec_result = (RAIL_EXEC_RESULT_ORDER*) event->wParam;
if (exec_result->execResult != RAIL_EXEC_S_OK)
{
2014-09-12 19:13:01 +04:00
WLog_ERR(TAG, "RAIL exec error: execResult=%s NtError=0x%X\n",
error_code_names[exec_result->execResult], exec_result->rawResult);
xfc->disconnect = True;
xfreerdp: a quick workaround for some issues with TS Remote App. Currently in Remote App mode we have no option to interact with the remote desktop host before the first RAIL window is created. In many situations this interaction possibility is absolutely required. One example is that screen which gets displayed if another user is logged on. It requires clicking a button in pre-RAIL mode so that the currently logged on user gets notified to confirm or deny the connection. Another example is the option to log on graphically (e.g. for hosts that don't support NLA) without predefined credentials. Also if the administrator sets the "User must change password at next logon" option there is currently no way to do this in TS Remote App mode. This change basically lets xfreerdp create the main window in Remote App mode like in a normal session and xfi->remote_app is not set to true initially. As soon as the rail exec result event or the first rail window creation request is received (whatever comes first) the main window gets destroyed and xfi->remote_app is set to true. The second change is to disconnect immediately if the rail exec result event reports an error, e.g. if the specified app cannot be found or if it is not in the list of allowed applications. This fixes FreeRDP github issue #143 and issue #308. I'm aware that this is not the most elegant solution but it is definitely an improvement and probably good enough for 1.0. A nicer solution would be hiding the main window and only displaying it if no rail exec result or rail window creation event is received after a certain timeout ...
2012-01-02 13:27:04 +04:00
}
else
{
xf_rail_enable_remoteapp_mode(xfc);
}
}
2014-08-18 21:34:47 +04:00
void xf_process_rail_server_sysparam_event(xfContext* xfc, rdpChannels* channels, wMessage* event)
{
2014-08-18 21:34:47 +04:00
RAIL_SYSPARAM_ORDER* sysparam = (RAIL_SYSPARAM_ORDER*) event->wParam;
switch (sysparam->param)
{
case SPI_SET_SCREEN_SAVE_ACTIVE:
break;
2014-08-18 21:34:47 +04:00
case SPI_SET_SCREEN_SAVE_SECURE:
break;
}
}
2014-08-18 21:34:47 +04:00
void xf_process_rail_server_minmaxinfo_event(xfContext* xfc, rdpChannels* channels, wMessage* event)
{
2014-08-18 21:34:47 +04:00
rdpRail* rail;
rdpWindow* rail_window = NULL;
RAIL_MINMAXINFO_ORDER* minmax = (RAIL_MINMAXINFO_ORDER*) event->wParam;
rail = ((rdpContext*) xfc)->rail;
rail_window = window_list_get_by_id(rail->list, minmax->windowId);
if (rail_window != NULL)
{
2014-08-18 21:34:47 +04:00
xfWindow* window = NULL;
window = (xfWindow*) rail_window->extra;
DEBUG_X11_LMS("windowId=0x%X maxWidth=%d maxHeight=%d maxPosX=%d maxPosY=%d "
"minTrackWidth=%d minTrackHeight=%d maxTrackWidth=%d maxTrackHeight=%d",
minmax->windowId, minmax->maxWidth, minmax->maxHeight,
(INT16)minmax->maxPosX, (INT16)minmax->maxPosY,
minmax->minTrackWidth, minmax->minTrackHeight,
minmax->maxTrackWidth, minmax->maxTrackHeight);
xf_SetWindowMinMaxInfo(xfc, window, minmax->maxWidth, minmax->maxHeight, minmax->maxPosX, minmax->maxPosY,
minmax->minTrackWidth, minmax->minTrackHeight, minmax->maxTrackWidth, minmax->maxTrackHeight);
}
}
2014-08-18 21:34:47 +04:00
const char* movetype_names[] =
{
"(invalid)",
"RAIL_WMSZ_LEFT",
"RAIL_WMSZ_RIGHT",
"RAIL_WMSZ_TOP",
"RAIL_WMSZ_TOPLEFT",
"RAIL_WMSZ_TOPRIGHT",
"RAIL_WMSZ_BOTTOM",
"RAIL_WMSZ_BOTTOMLEFT",
"RAIL_WMSZ_BOTTOMRIGHT",
"RAIL_WMSZ_MOVE",
"RAIL_WMSZ_KEYMOVE",
"RAIL_WMSZ_KEYSIZE"
};
2014-08-18 21:34:47 +04:00
void xf_process_rail_server_localmovesize_event(xfContext* xfc, rdpChannels* channels, wMessage* event)
{
int x = 0, y = 0;
2014-08-18 21:34:47 +04:00
rdpRail* rail;
int direction = 0;
Window child_window;
2014-08-18 21:34:47 +04:00
rdpWindow* rail_window = NULL;
RAIL_LOCALMOVESIZE_ORDER* movesize = (RAIL_LOCALMOVESIZE_ORDER*) event->wParam;
rail = ((rdpContext*) xfc)->rail;
rail_window = window_list_get_by_id(rail->list, movesize->windowId);
if (rail_window != NULL)
{
2014-08-18 21:34:47 +04:00
xfWindow* xfw = NULL;
xfw = (xfWindow*) rail_window->extra;
DEBUG_X11_LMS("windowId=0x%X isMoveSizeStart=%d moveSizeType=%s PosX=%d PosY=%d",
movesize->windowId, movesize->isMoveSizeStart,
movetype_names[movesize->moveSizeType], (INT16) movesize->posX, (INT16) movesize->posY);
switch (movesize->moveSizeType)
{
case RAIL_WMSZ_LEFT: //0x1
direction = _NET_WM_MOVERESIZE_SIZE_LEFT;
x = movesize->posX;
y = movesize->posY;
break;
2014-08-18 21:34:47 +04:00
case RAIL_WMSZ_RIGHT: //0x2
direction = _NET_WM_MOVERESIZE_SIZE_RIGHT;
x = movesize->posX;
y = movesize->posY;
break;
2014-08-18 21:34:47 +04:00
case RAIL_WMSZ_TOP: //0x3
direction = _NET_WM_MOVERESIZE_SIZE_TOP;
x = movesize->posX;
y = movesize->posY;
break;
2014-08-18 21:34:47 +04:00
case RAIL_WMSZ_TOPLEFT: //0x4
direction = _NET_WM_MOVERESIZE_SIZE_TOPLEFT;
x = movesize->posX;
y = movesize->posY;
break;
2014-08-18 21:34:47 +04:00
case RAIL_WMSZ_TOPRIGHT: //0x5
direction = _NET_WM_MOVERESIZE_SIZE_TOPRIGHT;
x = movesize->posX;
y = movesize->posY;
break;
2014-08-18 21:34:47 +04:00
case RAIL_WMSZ_BOTTOM: //0x6
direction = _NET_WM_MOVERESIZE_SIZE_BOTTOM;
x = movesize->posX;
y = movesize->posY;
break;
2014-08-18 21:34:47 +04:00
case RAIL_WMSZ_BOTTOMLEFT: //0x7
direction = _NET_WM_MOVERESIZE_SIZE_BOTTOMLEFT;
x = movesize->posX;
y = movesize->posY;
break;
2014-08-18 21:34:47 +04:00
case RAIL_WMSZ_BOTTOMRIGHT: //0x8
direction = _NET_WM_MOVERESIZE_SIZE_BOTTOMRIGHT;
x = movesize->posX;
y = movesize->posY;
break;
2014-08-18 21:34:47 +04:00
case RAIL_WMSZ_MOVE: //0x9
direction = _NET_WM_MOVERESIZE_MOVE;
XTranslateCoordinates(xfc->display, xfw->handle,
RootWindowOfScreen(xfc->screen),
movesize->posX, movesize->posY, &x, &y, &child_window);
break;
2014-08-18 21:34:47 +04:00
case RAIL_WMSZ_KEYMOVE: //0xA
direction = _NET_WM_MOVERESIZE_MOVE_KEYBOARD;
x = movesize->posX;
y = movesize->posY;
/* FIXME: local keyboard moves not working */
return;
2014-08-18 21:34:47 +04:00
case RAIL_WMSZ_KEYSIZE: //0xB
direction = _NET_WM_MOVERESIZE_SIZE_KEYBOARD;
x = movesize->posX;
y = movesize->posY;
/* FIXME: local keyboard moves not working */
return;
}
if (movesize->isMoveSizeStart)
{
xf_StartLocalMoveSize(xfc, xfw, direction, x, y);
}
else
{
xf_EndLocalMoveSize(xfc, xfw);
}
}
}
2014-08-18 21:34:47 +04:00
void xf_process_rail_appid_resp_event(xfContext* xfc, rdpChannels* channels, wMessage* event)
{
2014-08-18 21:34:47 +04:00
RAIL_GET_APPID_RESP_ORDER* appid_resp =
(RAIL_GET_APPID_RESP_ORDER*) event->wParam;
2014-09-12 19:13:01 +04:00
WLog_ERR(TAG, "Server Application ID Response PDU: windowId=0x%X "
"applicationId=(length=%d dump)\n",
appid_resp->windowId, 512);
2014-08-18 21:34:47 +04:00
winpr_HexDump(TAG, WLOG_ERROR, (BYTE*) &appid_resp->applicationId, 512);
}
2014-08-18 21:34:47 +04:00
void xf_process_rail_langbarinfo_event(xfContext* xfc, rdpChannels* channels, wMessage* event)
{
2014-08-18 21:34:47 +04:00
RAIL_LANGBAR_INFO_ORDER* langbar =
(RAIL_LANGBAR_INFO_ORDER*) event->wParam;
2014-09-12 19:13:01 +04:00
WLog_ERR(TAG, "Language Bar Information PDU: languageBarStatus=0x%X\n",
langbar->languageBarStatus);
}
2014-08-18 21:34:47 +04:00
void xf_process_rail_event(xfContext* xfc, rdpChannels* channels, wMessage* event)
{
switch (GetMessageType(event->id))
{
case RailChannel_GetSystemParam:
xf_process_rail_get_sysparams_event(xfc, channels, event);
break;
2014-08-18 21:34:47 +04:00
case RailChannel_ServerExecuteResult:
xf_process_rail_exec_result_event(xfc, channels, event);
break;
2014-08-18 21:34:47 +04:00
case RailChannel_ServerSystemParam:
xf_process_rail_server_sysparam_event(xfc, channels, event);
break;
2014-08-18 21:34:47 +04:00
case RailChannel_ServerMinMaxInfo:
xf_process_rail_server_minmaxinfo_event(xfc, channels, event);
break;
2014-08-18 21:34:47 +04:00
case RailChannel_ServerLocalMoveSize:
xf_process_rail_server_localmovesize_event(xfc, channels, event);
break;
2014-08-18 21:34:47 +04:00
case RailChannel_ServerGetAppIdResponse:
xf_process_rail_appid_resp_event(xfc, channels, event);
break;
2014-08-18 21:34:47 +04:00
case RailChannel_ServerLanguageBarInfo:
xf_process_rail_langbarinfo_event(xfc, channels, event);
break;
2014-08-18 21:34:47 +04:00
default:
break;
}
}