1270 lines
59 KiB
Plaintext
1270 lines
59 KiB
Plaintext
# You may now use double quotes around pathnames, in case
|
|
# your pathname includes spaces.
|
|
|
|
#=======================================================================
|
|
# PLUGIN_CTRL:
|
|
# Controls the presence of optional device plugins. These plugins are loaded
|
|
# directly with this option and some of them install a config option that is
|
|
# only available when the plugin device is loaded. The value "1" means to load
|
|
# the plugin and "0" will unload it (if loaded before).
|
|
#
|
|
# These plugins will be loaded by default (if present): 'biosdev', 'extfpuirq',
|
|
# 'gameport', 'iodebug','parallel', 'serial', 'speaker' and 'unmapped'.
|
|
#
|
|
# These plugins are also supported, but they are usually loaded directly with
|
|
# their bochsrc option: 'e1000', 'es1370', 'ne2k', 'pcidev', 'pcipnic', 'sb16',
|
|
# 'usb_ehci', 'usb_ohci', 'usb_uhci', 'usb_xhci' and 'voodoo'.
|
|
#=======================================================================
|
|
#plugin_ctrl: unmapped=0, e1000=1 # unload 'unmapped' and load 'e1000'
|
|
|
|
#=======================================================================
|
|
# CONFIG_INTERFACE
|
|
#
|
|
# The configuration interface is a series of menus or dialog boxes that
|
|
# allows you to change all the settings that control Bochs's behavior.
|
|
# Depending on the platform there are up to 3 choices of configuration
|
|
# interface: a text mode version called "textconfig" and two graphical versions
|
|
# called "win32config" and "wx". The text mode version uses stdin/stdout and
|
|
# is always compiled in, unless Bochs is compiled for wx only. The choice
|
|
# "win32config" is only available on win32 and it is the default there.
|
|
# The choice "wx" is only available when you use "--with-wx" on the configure
|
|
# command. If you do not write a config_interface line, Bochs will
|
|
# choose a default for you.
|
|
#
|
|
# NOTE: if you use the "wx" configuration interface, you must also use
|
|
# the "wx" display library.
|
|
#=======================================================================
|
|
#config_interface: textconfig
|
|
#config_interface: win32config
|
|
#config_interface: wx
|
|
|
|
#=======================================================================
|
|
# DISPLAY_LIBRARY
|
|
#
|
|
# The display library is the code that displays the Bochs VGA screen. Bochs
|
|
# has a selection of about 10 different display library implementations for
|
|
# different platforms. If you run configure with multiple --with-* options,
|
|
# the display_library command lets you choose which one you want to run with.
|
|
# If you do not write a display_library line, Bochs will choose a default for
|
|
# you.
|
|
#
|
|
# The choices are:
|
|
# x use X windows interface, cross platform
|
|
# win32 use native win32 libraries
|
|
# carbon use Carbon library (for MacOS X)
|
|
# macintosh use MacOS pre-10
|
|
# amigaos use native AmigaOS libraries
|
|
# sdl use SDL 1.2.x library, cross platform
|
|
# sdl2 use SDL 2.x library, cross platform
|
|
# svga use SVGALIB library for Linux, allows graphics without X11
|
|
# term text only, uses curses/ncurses library, cross platform
|
|
# rfb provides an interface to AT&T's VNC viewer, cross platform
|
|
# vncsrv use LibVNCServer for extended RFB(VNC) support
|
|
# wx use wxWidgets library, cross platform
|
|
# nogui no display at all
|
|
#
|
|
# NOTE: if you use the "wx" configuration interface, you must also use
|
|
# the "wx" display library.
|
|
#
|
|
# Specific options:
|
|
# Some display libraries now support specific options to control their
|
|
# behaviour. These options are supported by more than one display library:
|
|
#
|
|
# "gui_debug" - use GTK debugger gui (sdl, sdl2, x) / Win32 debugger gui (sdl,
|
|
# sdl2, win32)
|
|
# "hideIPS" - disable IPS output in status bar (rfb, sdl, sdl2, vncsrv,
|
|
# win32, wx, x)
|
|
# "nokeyrepeat" - turn off host keyboard repeat (sdl, sdl2, win32, x)
|
|
# "timeout" - time (in seconds) to wait for client (rfb, vncsrv)
|
|
#
|
|
# See the examples below for other currently supported options.
|
|
#=======================================================================
|
|
#display_library: amigaos
|
|
#display_library: carbon
|
|
#display_library: macintosh
|
|
#display_library: nogui
|
|
#display_library: rfb
|
|
#display_library: sdl, options="fullscreen" # startup in fullscreen mode
|
|
#display_library: sdl2, options="fullscreen" # startup in fullscreen mode
|
|
#display_library: term
|
|
#display_library: vncsrv
|
|
# "traphotkeys" - system hotkeys not handled by host OS, but sent to guest
|
|
# (win32 in mouse capture and fullscreen mode: alt-tab, win,
|
|
# alt-space, alt-esc, ctrl-esc)
|
|
#display_library: win32, options="traphotkeys"
|
|
#display_library: wx
|
|
#display_library: x
|
|
|
|
#=======================================================================
|
|
# CPU:
|
|
# This defines cpu-related parameters inside Bochs:
|
|
#
|
|
# MODEL:
|
|
# Selects CPU configuration to emulate from pre-defined list of all
|
|
# supported configurations. When this option is used and the value
|
|
# is different from 'bx_generic', the parameters of the CPUID option
|
|
# have no effect anymore.
|
|
#
|
|
# CPU configurations that can be selected:
|
|
# -----------------------------------------------------------------
|
|
# pentium Intel Pentium (P54C)
|
|
# pentium_mmx Intel Pentium MMX
|
|
# amd_k6_2_chomper AMD-K6(tm) 3D processor (Chomper)
|
|
# p2_klamath Intel Pentium II (Klamath)
|
|
# p3_katmai Intel Pentium III (Katmai)
|
|
# p4_willamette Intel(R) Pentium(R) 4 (Willamette)
|
|
# core_duo_t2400_yonah Intel(R) Core(TM) Duo CPU T2400 (Yonah)
|
|
# atom_n270 Intel(R) Atom(TM) CPU N270
|
|
# p4_prescott_celeron_336 Intel(R) Celeron(R) 336 (Prescott)
|
|
# athlon64_clawhammer AMD Athlon(tm) 64 Processor 2800+ (Clawhammer)
|
|
# athlon64_venice AMD Athlon(tm) 64 Processor 3000+ (Venice)
|
|
# turion64_tyler AMD Turion(tm) 64 X2 Mobile TL-60 (Tyler)
|
|
# phenom_8650_toliman AMD Phenom X3 8650 (Toliman)
|
|
# core2_penryn_t9600 Intel Mobile Core 2 Duo T9600 (Penryn)
|
|
# corei5_lynnfield_750 Intel(R) Core(TM) i5 750 (Lynnfield)
|
|
# corei5_arrandale_m520 Intel(R) Core(TM) i5 M 520 (Arrandale)
|
|
# corei7_sandy_bridge_2600k Intel(R) Core(TM) i7-2600K (Sandy Bridge)
|
|
# zambezi AMD FX(tm)-4100 Quad-Core Processor (Zambezi)
|
|
# trinity_apu AMD A8-5600K APU (Trinity)
|
|
# ryzen AMD Ryzen 7 1700
|
|
# corei7_ivy_bridge_3770k Intel(R) Core(TM) i7-3770K CPU (Ivy Bridge)
|
|
# corei7_haswell_4770 Intel(R) Core(TM) i7-4770 CPU (Haswell)
|
|
# broadwell_ult Intel(R) Processor 5Y70 CPU (Broadwell)
|
|
#
|
|
# COUNT:
|
|
# Set the number of processors:cores per processor:threads per core when
|
|
# Bochs is compiled for SMP emulation. Bochs currently supports up to
|
|
# 14 threads (legacy APIC) or 254 threads (xAPIC or higher) running
|
|
# simultaniosly. If Bochs is compiled without SMP support, it won't accept
|
|
# values different from 1.
|
|
#
|
|
# QUANTUM:
|
|
# Maximum amount of instructions allowed to execute by processor before
|
|
# returning control to another cpu. This option exists only in Bochs
|
|
# binary compiled with SMP support.
|
|
#
|
|
# RESET_ON_TRIPLE_FAULT:
|
|
# Reset the CPU when triple fault occur (highly recommended) rather than
|
|
# PANIC. Remember that if you trying to continue after triple fault the
|
|
# simulation will be completely bogus !
|
|
#
|
|
# CPUID_LIMIT_WINNT:
|
|
# Determine whether to limit maximum CPUID function to 2. This mode is
|
|
# required to workaround WinNT installation and boot issues.
|
|
#
|
|
# MSRS:
|
|
# Define path to user CPU Model Specific Registers (MSRs) specification.
|
|
# See example in msrs.def.
|
|
#
|
|
# IGNORE_BAD_MSRS:
|
|
# Ignore MSR references that Bochs does not understand; print a warning
|
|
# message instead of generating #GP exception. This option is enabled
|
|
# by default but will not be avaiable if configurable MSRs are enabled.
|
|
#
|
|
# MWAIT_IS_NOP:
|
|
# When this option is enabled MWAIT will not put the CPU into a sleep state.
|
|
# This option exists only if Bochs compiled with --enable-monitor-mwait.
|
|
#
|
|
# IPS:
|
|
# Emulated Instructions Per Second. This is the number of IPS that bochs
|
|
# is capable of running on your machine. You can recompile Bochs with
|
|
# --enable-show-ips option enabled, to find your host's capability.
|
|
# Measured IPS value will then be logged into your log file or shown
|
|
# in the status bar (if supported by the gui).
|
|
#
|
|
# IPS is used to calibrate many time-dependent events within the bochs
|
|
# simulation. For example, changing IPS affects the frequency of VGA
|
|
# updates, the duration of time before a key starts to autorepeat, and
|
|
# the measurement of BogoMips and other benchmarks.
|
|
#
|
|
# Examples:
|
|
#
|
|
# Bochs Machine/Compiler Mips
|
|
# ______________________________________________________________________
|
|
# 2.4.6 3.4Ghz Intel Core i7 2600 with Win7x64/g++ 4.5.2 85 to 95 Mips
|
|
# 2.3.7 3.2Ghz Intel Core 2 Q9770 with WinXP/g++ 3.4 50 to 55 Mips
|
|
# 2.3.7 2.6Ghz Intel Core 2 Duo with WinXP/g++ 3.4 38 to 43 Mips
|
|
# 2.2.6 2.6Ghz Intel Core 2 Duo with WinXP/g++ 3.4 21 to 25 Mips
|
|
# 2.2.6 2.1Ghz Athlon XP with Linux 2.6/g++ 3.4 12 to 15 Mips
|
|
#=======================================================================
|
|
cpu: model=core2_penryn_t9600, count=1, ips=50000000, reset_on_triple_fault=1, ignore_bad_msrs=1, msrs="msrs.def"
|
|
cpu: cpuid_limit_winnt=0
|
|
|
|
#=======================================================================
|
|
# CPUID:
|
|
#
|
|
# This defines features and functionality supported by Bochs emulated CPU.
|
|
# The option has no offect if CPU model was selected in CPU option.
|
|
#
|
|
# MMX:
|
|
# Select MMX instruction set support.
|
|
# This option exists only if Bochs compiled with BX_CPU_LEVEL >= 5.
|
|
#
|
|
# APIC:
|
|
# Select APIC configuration (LEGACY/XAPIC/XAPIC_EXT/X2APIC).
|
|
# This option exists only if Bochs compiled with BX_CPU_LEVEL >= 5.
|
|
#
|
|
# SEP:
|
|
# Select SYSENTER/SYSEXIT instruction set support.
|
|
# This option exists only if Bochs compiled with BX_CPU_LEVEL >= 6.
|
|
#
|
|
# SIMD:
|
|
# Select SIMD instructions support.
|
|
# Any of NONE/SSE/SSE2/SSE3/SSSE3/SSE4_1/SSE4_2/AVX/AVX2/AVX512
|
|
# could be selected.
|
|
#
|
|
# This option exists only if Bochs compiled with BX_CPU_LEVEL >= 6.
|
|
# The AVX choises exists only if Bochs compiled with --enable-avx option.
|
|
#
|
|
# SSE4A:
|
|
# Select AMD SSE4A instructions support.
|
|
# This option exists only if Bochs compiled with BX_CPU_LEVEL >= 6.
|
|
#
|
|
# MISALIGNED_SSE:
|
|
# Select AMD Misaligned SSE mode support.
|
|
# This option exists only if Bochs compiled with BX_CPU_LEVEL >= 6.
|
|
#
|
|
# AES:
|
|
# Select AES instruction set support.
|
|
# This option exists only if Bochs compiled with BX_CPU_LEVEL >= 6.
|
|
#
|
|
# SHA:
|
|
# Select SHA instruction set support.
|
|
# This option exists only if Bochs compiled with BX_CPU_LEVEL >= 6.
|
|
#
|
|
# MOVBE:
|
|
# Select MOVBE Intel(R) Atom instruction support.
|
|
# This option exists only if Bochs compiled with BX_CPU_LEVEL >= 6.
|
|
#
|
|
# ADX:
|
|
# Select ADCX/ADOX instructions support.
|
|
# This option exists only if Bochs compiled with BX_CPU_LEVEL >= 6.
|
|
#
|
|
# XSAVE:
|
|
# Select XSAVE extensions support.
|
|
# This option exists only if Bochs compiled with BX_CPU_LEVEL >= 6.
|
|
#
|
|
# XSAVEOPT:
|
|
# Select XSAVEOPT instruction support.
|
|
# This option exists only if Bochs compiled with BX_CPU_LEVEL >= 6.
|
|
#
|
|
# AVX_F16C:
|
|
# Select AVX float16 convert instructions support.
|
|
# This option exists only if Bochs compiled with --enable-avx option.
|
|
#
|
|
# AVX_FMA:
|
|
# Select AVX fused multiply add (FMA) instructions support.
|
|
# This option exists only if Bochs compiled with --enable-avx option.
|
|
#
|
|
# BMI:
|
|
# Select BMI1/BMI2 instructions support.
|
|
# This option exists only if Bochs compiled with --enable-avx option.
|
|
#
|
|
# XOP:
|
|
# Select AMD XOP instructions support.
|
|
# This option exists only if Bochs compiled with --enable-avx option.
|
|
#
|
|
# FMA4:
|
|
# Select AMD four operand FMA instructions support.
|
|
# This option exists only if Bochs compiled with --enable-avx option.
|
|
#
|
|
# TBM:
|
|
# Select AMD Trailing Bit Manipulation (TBM) instructions support.
|
|
# This option exists only if Bochs compiled with --enable-avx option.
|
|
#
|
|
# X86-64:
|
|
# Enable x86-64 and long mode support.
|
|
# This option exists only if Bochs compiled with x86-64 support.
|
|
#
|
|
# 1G_PAGES:
|
|
# Enable 1G page size support in long mode.
|
|
# This option exists only if Bochs compiled with x86-64 support.
|
|
#
|
|
# PCID:
|
|
# Enable Process-Context Identifiers (PCID) support in long mode.
|
|
# This option exists only if Bochs compiled with x86-64 support.
|
|
#
|
|
# FSGSBASE:
|
|
# Enable GS/GS BASE access instructions support in long mode.
|
|
# This option exists only if Bochs compiled with x86-64 support.
|
|
#
|
|
# SMEP:
|
|
# Enable Supervisor Mode Execution Protection (SMEP) support.
|
|
# This option exists only if Bochs compiled with BX_CPU_LEVEL >= 6.
|
|
#
|
|
# SMAP:
|
|
# Enable Supervisor Mode Access Prevention (SMAP) support.
|
|
# This option exists only if Bochs compiled with BX_CPU_LEVEL >= 6.
|
|
#
|
|
# MWAIT:
|
|
# Select MONITOR/MWAIT instructions support.
|
|
# This option exists only if Bochs compiled with --enable-monitor-mwait.
|
|
#
|
|
# VMX:
|
|
# Select VMX extensions emulation support.
|
|
# This option exists only if Bochs compiled with --enable-vmx option.
|
|
#
|
|
# SVM:
|
|
# Select AMD SVM (Secure Virtual Machine) extensions emulation support.
|
|
# This option exists only if Bochs compiled with --enable-svm option.
|
|
#
|
|
# VENDOR_STRING:
|
|
# Set the CPUID vendor string returned by CPUID(0x0). This should be a
|
|
# twelve-character ASCII string.
|
|
#
|
|
# BRAND_STRING:
|
|
# Set the CPUID vendor string returned by CPUID(0x80000002 .. 0x80000004).
|
|
# This should be at most a forty-eight-character ASCII string.
|
|
#
|
|
# LEVEL:
|
|
# Set emulated CPU level information returned by CPUID. Default value is
|
|
# determined by configure option --enable-cpu-level. Currently supported
|
|
# values are 5 (for Pentium and similar processors) and 6 (for P6 and
|
|
# later processors).
|
|
#
|
|
# FAMILY:
|
|
# Set model information returned by CPUID. Default family value determined
|
|
# by configure option --enable-cpu-level.
|
|
#
|
|
# MODEL:
|
|
# Set model information returned by CPUID. Default model value is 3.
|
|
#
|
|
# STEPPING:
|
|
# Set stepping information returned by CPUID. Default stepping value is 3.
|
|
#=======================================================================
|
|
#cpuid: x86_64=1, mmx=1, sep=1, simd=sse4_2, apic=xapic, aes=1, movbe=1, xsave=1
|
|
#cpuid: family=6, model=0x1a, stepping=5
|
|
|
|
#=======================================================================
|
|
# MEMORY
|
|
# Set the amount of physical memory you want to emulate.
|
|
#
|
|
# GUEST:
|
|
# Set amount of guest physical memory to emulate. The default is 32MB,
|
|
# the maximum amount limited only by physical address space limitations.
|
|
#
|
|
# HOST:
|
|
# Set amount of host memory you want to allocate for guest RAM emulation.
|
|
# It is possible to allocate less memory than you want to emulate in guest
|
|
# system. This will fake guest to see the non-existing memory. Once guest
|
|
# system touches new memory block it will be dynamically taken from the
|
|
# memory pool. You will be warned (by FATAL PANIC) in case guest already
|
|
# used all allocated host memory and wants more.
|
|
#
|
|
#=======================================================================
|
|
memory: guest=512, host=256
|
|
|
|
#=======================================================================
|
|
# ROMIMAGE:
|
|
# The ROM BIOS controls what the PC does when it first powers on.
|
|
# Normally, you can use a precompiled BIOS in the source or binary
|
|
# distribution called BIOS-bochs-latest. The default ROM BIOS is usually loaded
|
|
# starting at address 0xfffe0000, and it is exactly 128k long. The legacy
|
|
# version of the Bochs BIOS is usually loaded starting at address 0xffff0000,
|
|
# and it is exactly 64k long.
|
|
# You can use the environment variable $BXSHARE to specify the location
|
|
# of the BIOS.
|
|
# The usage of external large BIOS images (up to 512k) at memory top is
|
|
# now supported, but we still recommend to use the BIOS distributed with Bochs.
|
|
# The start address is optional, since it can be calculated from image size.
|
|
# The Bochs BIOS currently supports only the option "fastboot" to skip the
|
|
# boot menu delay.
|
|
#=======================================================================
|
|
romimage: file=$BXSHARE/BIOS-bochs-latest, options=fastboot
|
|
#romimage: file=$BXSHARE/bios.bin-1.7.5 # http://www.seabios.org/SeaBIOS
|
|
#romimage: file=mybios.bin, address=0xfff80000 # 512k at memory top
|
|
|
|
#=======================================================================
|
|
# VGAROMIMAGE
|
|
# You now need to load a VGA ROM BIOS into C0000.
|
|
#=======================================================================
|
|
#vgaromimage: file=bios/VGABIOS-elpin-2.40
|
|
vgaromimage: file=$BXSHARE/VGABIOS-lgpl-latest
|
|
#vgaromimage: file=bios/VGABIOS-lgpl-latest-cirrus
|
|
|
|
#=======================================================================
|
|
# OPTROMIMAGE[1-4]:
|
|
# You may now load up to 4 optional ROM images. Be sure to use a
|
|
# read-only area, typically between C8000 and EFFFF. These optional
|
|
# ROM images should not overwrite the rombios (located at
|
|
# F0000-FFFFF) and the videobios (located at C0000-C7FFF).
|
|
# Those ROM images will be initialized by the bios if they contain
|
|
# the right signature (0x55AA) and a valid checksum.
|
|
# It can also be a convenient way to upload some arbitrary code/data
|
|
# in the simulation, that can be retrieved by the boot loader
|
|
#=======================================================================
|
|
#optromimage1: file=optionalrom.bin, address=0xd0000
|
|
#optromimage2: file=optionalrom.bin, address=0xd1000
|
|
#optromimage3: file=optionalrom.bin, address=0xd2000
|
|
#optromimage4: file=optionalrom.bin, address=0xd3000
|
|
|
|
#optramimage1: file=/path/file1.img, address=0x0010000
|
|
#optramimage2: file=/path/file2.img, address=0x0020000
|
|
#optramimage3: file=/path/file3.img, address=0x0030000
|
|
#optramimage4: file=/path/file4.img, address=0x0040000
|
|
|
|
#=======================================================================
|
|
# VGA:
|
|
# This defines parameters related to the VGA display
|
|
#
|
|
# EXTENSION
|
|
# Here you can specify the display extension to be used. With the value
|
|
# 'none' you can use standard VGA with no extension. Other supported
|
|
# values are 'vbe' for Bochs VBE and 'cirrus' for Cirrus SVGA support.
|
|
#
|
|
# UPDATE_FREQ
|
|
# This parameter specifies the number of display updates per second.
|
|
# The VGA update timer by default uses the realtime engine with a value
|
|
# of 5. This parameter can be changed at runtime.
|
|
#
|
|
# REALTIME
|
|
# If set to 1 (default), the VGA timer is based on realtime, otherwise it
|
|
# is driven by the cpu and depends on the ips setting. If the host is slow
|
|
# (low ips, update_freq) and the guest uses HLT appropriately, setting this
|
|
# to 0 and "clock: sync=none" may improve the responsiveness of the guest
|
|
# GUI when the guest is otherwise idle.
|
|
#
|
|
# Examples:
|
|
# vga: extension=cirrus, update_freq=10
|
|
#=======================================================================
|
|
#vga: extension=vbe, update_freq=5, realtime=1
|
|
|
|
#=======================================================================
|
|
# VOODOO:
|
|
# This defines the Voodoo Graphics emulation (experimental). Currently
|
|
# supported models are 'voodoo1' and 'voodoo2'. The Voodoo2 support is not
|
|
# yet complete. The 'realtime' option controls the behaviour of the timer
|
|
# used for the vertical retrace emulation. The gui screen update timing
|
|
# is controlled by the related 'vga' options.
|
|
#
|
|
# Examples:
|
|
# voodoo: enabled=1, model=voodoo1, realtime=1
|
|
#=======================================================================
|
|
#voodoo: enabled=1, model=voodoo1
|
|
|
|
#=======================================================================
|
|
# KEYBOARD:
|
|
# This defines parameters related to the emulated keyboard
|
|
#
|
|
# TYPE:
|
|
# Type of keyboard return by a "identify keyboard" command to the
|
|
# keyboard controller. It must be one of "xt", "at" or "mf".
|
|
# Defaults to "mf". It should be ok for almost everybody. A known
|
|
# exception is french macs, that do have a "at"-like keyboard.
|
|
#
|
|
# SERIAL_DELAY:
|
|
# Approximate time in microseconds that it takes one character to
|
|
# be transferred from the keyboard to controller over the serial path.
|
|
#
|
|
# PASTE_DELAY:
|
|
# Approximate time in microseconds between attempts to paste
|
|
# characters to the keyboard controller. This leaves time for the
|
|
# guest os to deal with the flow of characters. The ideal setting
|
|
# depends on how your operating system processes characters. The
|
|
# default of 100000 usec (.1 seconds) was chosen because it works
|
|
# consistently in Windows.
|
|
# If your OS is losing characters during a paste, increase the paste
|
|
# delay until it stops losing characters.
|
|
#
|
|
# KEYMAP:
|
|
# This enables a remap of a physical localized keyboard to a
|
|
# virtualized us keyboard, as the PC architecture expects.
|
|
#
|
|
# USER_SHORTCUT:
|
|
# This defines the keyboard shortcut to be sent when you press the "user"
|
|
# button in the headerbar. The shortcut string is a combination of maximum
|
|
# 3 key names (listed below) separated with a '-' character.
|
|
# Valid key names:
|
|
# "alt", "bksl", "bksp", "ctrl", "del", "down", "end", "enter", "esc",
|
|
# "f1", ... "f12", "home", "ins", "left", "menu", "minus", "pgdwn", "pgup",
|
|
# "plus", "power", "print", "right", "scrlck", "shift", "space", "tab", "up"
|
|
# and "win".
|
|
|
|
# Examples:
|
|
# keyboard: type=mf, serial_delay=200, paste_delay=100000
|
|
# keyboard: keymap=gui/keymaps/x11-pc-de.map
|
|
# keyboard: user_shortcut=ctrl-alt-del
|
|
#=======================================================================
|
|
#keyboard: type=mf, serial_delay=250
|
|
|
|
#=======================================================================
|
|
# MOUSE:
|
|
# This defines parameters for the emulated mouse type, the initial status
|
|
# of the mouse capture and the runtime method to toggle it.
|
|
#
|
|
# TYPE:
|
|
# With the mouse type option you can select the type of mouse to emulate.
|
|
# The default value is 'ps2'. The other choices are 'imps2' (wheel mouse
|
|
# on PS/2), 'serial', 'serial_wheel', 'serial_msys' (one com port requires
|
|
# setting 'mode=mouse') 'inport' and 'bus' (if present). To connect a mouse
|
|
# to a USB port, see the 'usb_uhci', 'usb_ohci', 'usb_ehci' or 'usb_xhci'
|
|
# options (requires PCI and USB support).
|
|
#
|
|
# ENABLED:
|
|
# The Bochs gui creates mouse "events" unless the 'enabled' option is
|
|
# set to 0. The hardware emulation itself is not disabled by this.
|
|
# Unless you have a particular reason for enabling the mouse by default,
|
|
# it is recommended that you leave it off. You can also toggle the mouse
|
|
# usage at runtime (RFB, SDL, Win32, wxWidgets and X11 - see below).
|
|
#
|
|
# TOGGLE:
|
|
# The default method to toggle the mouse capture at runtime is to press the
|
|
# CTRL key and the middle mouse button ('ctrl+mbutton'). This option allows
|
|
# to change the method to 'ctrl+f10' (like DOSBox), 'ctrl+alt' (like QEMU)
|
|
# or 'f12'.
|
|
#
|
|
# Examples:
|
|
# mouse: enabled=1
|
|
# mouse: type=imps2, enabled=1
|
|
# mouse: type=serial, enabled=1
|
|
# mouse: enabled=0, toggle=ctrl+f10
|
|
#=======================================================================
|
|
mouse: enabled=0
|
|
|
|
#=======================================================================
|
|
# PCI:
|
|
# This option controls the presence of a PCI chipset in Bochs. Currently it only
|
|
# supports the i430FX and i440FX chipsets. You can also specify the devices
|
|
# connected to PCI slots. Up to 5 slots are available. For these combined PCI/ISA
|
|
# devices assigning to slot is mandatory if you want to emulate the PCI model:
|
|
# cirrus, ne2k and pcivga. These PCI-only devices are also supported, but they
|
|
# are auto-assigned if you don't use the slot configuration: e1000, es1370,
|
|
# pcidev, pcipnic, usb_ehci, usb_ohci, usb_xhci and voodoo.
|
|
#
|
|
# Example:
|
|
# pci: enabled=1, chipset=i440fx, slot1=pcivga, slot2=ne2k
|
|
#=======================================================================
|
|
pci: enabled=1, chipset=i440fx
|
|
|
|
#=======================================================================
|
|
# CLOCK:
|
|
# This defines the parameters of the clock inside Bochs:
|
|
#
|
|
# SYNC:
|
|
# This defines the method how to synchronize the Bochs internal time
|
|
# with realtime. With the value 'none' the Bochs time relies on the IPS
|
|
# value and no host time synchronization is used. The 'slowdown' method
|
|
# sacrifices performance to preserve reproducibility while allowing host
|
|
# time correlation. The 'realtime' method sacrifices reproducibility to
|
|
# preserve performance and host-time correlation.
|
|
# It is possible to enable both synchronization methods.
|
|
#
|
|
# RTC_SYNC:
|
|
# If this option is enabled together with the realtime synchronization,
|
|
# the RTC runs at realtime speed. This feature is disabled by default.
|
|
#
|
|
# TIME0:
|
|
# Specifies the start (boot) time of the virtual machine. Use a time
|
|
# value as returned by the time(2) system call or a string as returned
|
|
# by the ctime(3) system call. If no time0 value is set or if time0
|
|
# equal to 1 (special case) or if time0 equal 'local', the simulation
|
|
# will be started at the current local host time. If time0 equal to 2
|
|
# (special case) or if time0 equal 'utc', the simulation will be started
|
|
# at the current utc time.
|
|
#
|
|
# Syntax:
|
|
# clock: sync=[none|slowdown|realtime|both], time0=[timeValue|local|utc]
|
|
#
|
|
# Example:
|
|
# clock: sync=none, time0=local # Now (localtime)
|
|
# clock: sync=slowdown, time0=315529200 # Tue Jan 1 00:00:00 1980
|
|
# clock: sync=none, time0="Mon Jan 1 00:00:00 1990" # 631148400
|
|
# clock: sync=realtime, time0=938581955 # Wed Sep 29 07:12:35 1999
|
|
# clock: sync=realtime, time0="Sat Jan 1 00:00:00 2000" # 946681200
|
|
# clock: sync=none, time0=1 # Now (localtime)
|
|
# clock: sync=none, time0=utc # Now (utc/gmt)
|
|
#
|
|
# Default value are sync=none, rtc_sync=0, time0=local
|
|
#=======================================================================
|
|
#clock: sync=none, time0=local
|
|
|
|
#=======================================================================
|
|
# CMOSIMAGE:
|
|
# This defines a binary image file with size 128 bytes that can be loaded into
|
|
# the CMOS RAM at startup. The rtc_init parameter controls whether initialize
|
|
# the RTC with values stored in the image. By default the time0 argument given
|
|
# to the clock option is used. With 'rtc_init=image' the image is the source
|
|
# for the initial time.
|
|
#
|
|
# Example:
|
|
# cmosimage: file=cmos.img, rtc_init=image
|
|
#=======================================================================
|
|
#cmosimage: file=cmos.img, rtc_init=time0
|
|
|
|
#=======================================================================
|
|
# private_colormap: Request that the GUI create and use it's own
|
|
# non-shared colormap. This colormap will be used
|
|
# when in the bochs window. If not enabled, a
|
|
# shared colormap scheme may be used. Not implemented
|
|
# on all GUI's.
|
|
#
|
|
# Examples:
|
|
# private_colormap: enabled=1
|
|
# private_colormap: enabled=0
|
|
#=======================================================================
|
|
private_colormap: enabled=0
|
|
|
|
#=======================================================================
|
|
# FLOPPYA:
|
|
# Point this to pathname of floppy image file or device
|
|
# This should be of a bootable floppy(image/device) if you're
|
|
# booting from 'a' (or 'floppy').
|
|
#
|
|
# You can set the initial status of the media to 'ejected' or 'inserted'.
|
|
# floppya: 2_88=path, status=ejected (2.88M 3.5" media)
|
|
# floppya: 1_44=path, status=inserted (1.44M 3.5" media)
|
|
# floppya: 1_2=path, status=ejected (1.2M 5.25" media)
|
|
# floppya: 720k=path, status=inserted (720K 3.5" media)
|
|
# floppya: 360k=path, status=inserted (360K 5.25" media)
|
|
# floppya: 320k=path, status=inserted (320K 5.25" media)
|
|
# floppya: 180k=path, status=inserted (180K 5.25" media)
|
|
# floppya: 160k=path, status=inserted (160K 5.25" media)
|
|
# floppya: image=path, status=inserted (guess media type from image size)
|
|
# floppya: 1_44=vvfat:path, status=inserted (use directory as VFAT media)
|
|
# floppya: type=1_44 (1.44M 3.5" floppy drive, no media)
|
|
#
|
|
# The path should be the name of a disk image file. On Unix, you can use a raw
|
|
# device name such as /dev/fd0 on Linux. On win32 platforms, use drive letters
|
|
# such as a: or b: as the path. The parameter 'image' works with image files
|
|
# only. In that case the size must match one of the supported types.
|
|
# The parameter 'type' can be used to enable the floppy drive without media
|
|
# and status specified. Usually the drive type is set up based on the media type.
|
|
# The optional parameter 'write_protected' can be used to control the media
|
|
# write protect switch. By default it is turned off.
|
|
#=======================================================================
|
|
floppya: 1_44=/dev/fd0, status=inserted
|
|
#floppya: image=../1.44, status=inserted
|
|
#floppya: 1_44=/dev/fd0H1440, status=inserted
|
|
#floppya: 1_2=../1_2, status=inserted
|
|
#floppya: 1_44=a:, status=inserted
|
|
#floppya: 1_44=a.img, status=inserted, write_protected=1
|
|
#floppya: 1_44=/dev/rfd0a, status=inserted
|
|
|
|
#=======================================================================
|
|
# FLOPPYB:
|
|
# See FLOPPYA above for syntax
|
|
#=======================================================================
|
|
#floppyb: 1_44=b:, status=inserted
|
|
#floppyb: 1_44=b.img, status=inserted
|
|
|
|
#=======================================================================
|
|
# ATA0, ATA1, ATA2, ATA3
|
|
# ATA controller for hard disks and cdroms
|
|
#
|
|
# ata[0-3]: enabled=[0|1], ioaddr1=addr, ioaddr2=addr, irq=number
|
|
#
|
|
# These options enables up to 4 ata channels. For each channel
|
|
# the two base io addresses and the irq must be specified.
|
|
#
|
|
# ata0 and ata1 are enabled by default with the values shown below
|
|
#
|
|
# Examples:
|
|
# ata0: enabled=1, ioaddr1=0x1f0, ioaddr2=0x3f0, irq=14
|
|
# ata1: enabled=1, ioaddr1=0x170, ioaddr2=0x370, irq=15
|
|
# ata2: enabled=1, ioaddr1=0x1e8, ioaddr2=0x3e0, irq=11
|
|
# ata3: enabled=1, ioaddr1=0x168, ioaddr2=0x360, irq=9
|
|
#=======================================================================
|
|
ata0: enabled=1, ioaddr1=0x1f0, ioaddr2=0x3f0, irq=14
|
|
ata1: enabled=1, ioaddr1=0x170, ioaddr2=0x370, irq=15
|
|
ata2: enabled=0, ioaddr1=0x1e8, ioaddr2=0x3e0, irq=11
|
|
ata3: enabled=0, ioaddr1=0x168, ioaddr2=0x360, irq=9
|
|
|
|
#=======================================================================
|
|
# ATA[0-3]-MASTER, ATA[0-3]-SLAVE
|
|
#
|
|
# This defines the type and characteristics of all attached ata devices:
|
|
# type= type of attached device [disk|cdrom]
|
|
# mode= only valid for disks [flat|concat|external|dll|sparse|vmware3]
|
|
# [vmware4|undoable|growing|volatile|vpc]
|
|
# [vbox|vvfat]
|
|
# path= path of the image / directory
|
|
# cylinders= only valid for disks
|
|
# heads= only valid for disks
|
|
# spt= only valid for disks
|
|
# status= only valid for cdroms [inserted|ejected]
|
|
# biosdetect= type of biosdetection [auto|cmos|none]
|
|
# translation=type of translation of the bios, only for disks [none|lba|large|rechs|auto]
|
|
# model= string returned by identify device command
|
|
# journal= optional filename of the redolog for undoable, volatile and vvfat disks
|
|
#
|
|
# Point this at a hard disk image file, cdrom iso file, or physical cdrom
|
|
# device. To create a hard disk image, try running bximage. It will help you
|
|
# choose the size and then suggest a line that works with it.
|
|
#
|
|
# In UNIX it may be possible to use a raw device as a Bochs hard disk,
|
|
# but WE DON'T RECOMMEND IT. In Windows there is no easy way.
|
|
#
|
|
# In windows, the drive letter + colon notation should be used for cdroms.
|
|
# Depending on versions of windows and drivers, you may only be able to
|
|
# access the "first" cdrom in the system. On MacOSX, use path="drive"
|
|
# to access the physical drive.
|
|
#
|
|
# The path is mandatory for hard disks. Disk geometry autodetection works with
|
|
# images created by bximage if CHS is set to 0/0/0 (cylinders are calculated
|
|
# using heads=16 and spt=63). For other hard disk images and modes the
|
|
# cylinders, heads, and spt are mandatory. In all cases the disk size reported
|
|
# from the image must be exactly C*H*S*512.
|
|
#
|
|
# Default values are:
|
|
# mode=flat, biosdetect=auto, translation=auto, model="Generic 1234"
|
|
#
|
|
# The biosdetect option has currently no effect on the bios
|
|
#
|
|
# Examples:
|
|
# ata0-master: type=disk, mode=flat, path=10M.sample, cylinders=306, heads=4, spt=17
|
|
# ata0-slave: type=disk, mode=flat, path=20M.sample, cylinders=615, heads=4, spt=17
|
|
# ata1-master: type=disk, mode=flat, path=30M.sample, cylinders=615, heads=6, spt=17
|
|
# ata1-slave: type=disk, mode=flat, path=46M.sample, cylinders=940, heads=6, spt=17
|
|
# ata2-master: type=disk, mode=flat, path=62M.sample, cylinders=940, heads=8, spt=17
|
|
# ata2-slave: type=disk, mode=flat, path=112M.sample, cylinders=900, heads=15, spt=17
|
|
# ata3-master: type=disk, mode=flat, path=483M.sample, cylinders=1024, heads=15, spt=63
|
|
# ata3-slave: type=cdrom, path=iso.sample, status=inserted
|
|
#=======================================================================
|
|
ata0-master: type=disk, mode=flat, path="30M.sample"
|
|
#ata0-master: type=disk, mode=flat, path="30M.sample", cylinders=615, heads=6, spt=17
|
|
#ata0-master: type=disk, mode=flat, path="c.img", cylinders=0 # autodetect
|
|
#ata0-slave: type=disk, mode=vvfat, path=/bochs/images/vvfat, journal=vvfat.redolog
|
|
#ata0-slave: type=cdrom, path=D:, status=inserted
|
|
#ata0-slave: type=cdrom, path=/dev/cdrom, status=inserted
|
|
#ata0-slave: type=cdrom, path="drive", status=inserted
|
|
#ata0-slave: type=cdrom, path=/dev/rcd0d, status=inserted
|
|
|
|
#=======================================================================
|
|
# BOOT:
|
|
# This defines the boot sequence. Now you can specify up to 3 boot drives,
|
|
# which can be 'floppy', 'disk', 'cdrom' or 'network' (boot ROM).
|
|
# Legacy 'a' and 'c' are also supported.
|
|
# Examples:
|
|
# boot: floppy
|
|
# boot: cdrom, disk
|
|
# boot: network, disk
|
|
# boot: cdrom, floppy, disk
|
|
#=======================================================================
|
|
#boot: floppy
|
|
boot: disk
|
|
|
|
#=======================================================================
|
|
# FLOPPY_BOOTSIG_CHECK: disabled=[0|1]
|
|
# Enables or disables the 0xaa55 signature check on boot floppies
|
|
# Defaults to disabled=0
|
|
# Examples:
|
|
# floppy_bootsig_check: disabled=0
|
|
# floppy_bootsig_check: disabled=1
|
|
#=======================================================================
|
|
floppy_bootsig_check: disabled=0
|
|
|
|
#=======================================================================
|
|
# LOG:
|
|
# Give the path of the log file you'd like Bochs debug and misc. verbiage
|
|
# to be written to. If you don't use this option or set the filename to
|
|
# '-' the output is written to the console. If you really don't want it,
|
|
# make it "/dev/null" (Unix) or "nul" (win32). :^(
|
|
#
|
|
# Examples:
|
|
# log: ./bochs.out
|
|
# log: /dev/tty
|
|
#=======================================================================
|
|
#log: /dev/null
|
|
log: bochsout.txt
|
|
|
|
#=======================================================================
|
|
# LOGPREFIX:
|
|
# This handles the format of the string prepended to each log line.
|
|
# You may use those special tokens :
|
|
# %t : 11 decimal digits timer tick
|
|
# %i : 8 hexadecimal digits of cpu current eip (ignored in SMP configuration)
|
|
# %e : 1 character event type ('i'nfo, 'd'ebug, 'p'anic, 'e'rror)
|
|
# %d : 5 characters string of the device, between brackets
|
|
#
|
|
# Default : %t%e%d
|
|
# Examples:
|
|
# logprefix: %t-%e-@%i-%d
|
|
# logprefix: %i%e%d
|
|
#=======================================================================
|
|
#logprefix: %t%e%d
|
|
|
|
#=======================================================================
|
|
# LOG CONTROLS
|
|
#
|
|
# Bochs has four severity levels for event logging.
|
|
# panic: cannot proceed. If you choose to continue after a panic,
|
|
# don't be surprised if you get strange behavior or crashes.
|
|
# error: something went wrong, but it is probably safe to continue the
|
|
# simulation.
|
|
# info: interesting or useful messages.
|
|
# debug: messages useful only when debugging the code. This may
|
|
# spit out thousands per second.
|
|
#
|
|
# For events of each level, you can choose to exit Bochs ('fatal'), 'ask',
|
|
# 'warn', 'report' or 'ignore'. The choices 'ask' and 'warn' are not supported
|
|
# by all guis, since they should bring up a dialog box. The 'warn' dialog is
|
|
# designed to confirm errors and the 'ask' dialog is usually used for panics
|
|
# and asks the user how to proceed.
|
|
#
|
|
# It is also possible to specify the 'action' to do for each Bochs facility
|
|
# separately (e.g. crash on panics from everything except the cdrom, and only
|
|
# report those). See the 'log function' module list in the user documentation.
|
|
#
|
|
# If you are experiencing many panics, it can be helpful to change
|
|
# the panic action to report instead of fatal. However, be aware
|
|
# that anything executed after a panic is uncharted territory and can
|
|
# cause bochs to become unstable. The panic is a "graceful exit," so
|
|
# if you disable it you may get a spectacular disaster instead.
|
|
#=======================================================================
|
|
panic: action=ask
|
|
error: action=report
|
|
info: action=report
|
|
debug: action=ignore, pci=report # report BX_DEBUG from module 'pci'
|
|
|
|
#=======================================================================
|
|
# DEBUGGER_LOG:
|
|
# Give the path of the log file you'd like Bochs to log debugger output.
|
|
# If you really don't want it, make it /dev/null or '-'. :^(
|
|
#
|
|
# Examples:
|
|
# debugger_log: ./debugger.out
|
|
#=======================================================================
|
|
#debugger_log: /dev/null
|
|
#debugger_log: debugger.out
|
|
debugger_log: -
|
|
|
|
#=======================================================================
|
|
# COM1, COM2, COM3, COM4:
|
|
# This defines a serial port (UART type 16550A). In the 'term' mode you can
|
|
# specify a device to use as com1. This can be a real serial line, or a pty.
|
|
# To use a pty (under X/Unix), create two windows (xterms, usually). One of
|
|
# them will run bochs, and the other will act as com1. Find out the tty the com1
|
|
# window using the `tty' command, and use that as the `dev' parameter.
|
|
# Then do `sleep 1000000' in the com1 window to keep the shell from
|
|
# messing with things, and run bochs in the other window. Serial I/O to
|
|
# com1 (port 0x3f8) will all go to the other window.
|
|
# In socket* and pipe* (win32 only) modes Bochs becomes either socket/named pipe
|
|
# client or server. In client mode it connects to an already running server (if
|
|
# connection fails Bochs treats com port as not connected). In server mode it
|
|
# opens socket/named pipe and waits until a client application connects to it
|
|
# before starting simulation. This mode is useful for remote debugging (e.g.
|
|
# with gdb's "target remote host:port" command or windbg's command line option
|
|
# -k com:pipe,port=\\.\pipe\pipename). Socket modes use simple TCP communication,
|
|
# pipe modes use duplex byte mode pipes.
|
|
# Other serial modes are 'null' (no input/output), 'file' (output to a file
|
|
# specified as the 'dev' parameter and changeable at runtime), 'raw' (use the
|
|
# real serial port - partly implemented on win32), 'mouse' (standard serial
|
|
# mouse - requires mouse option setting 'type=serial', 'type=serial_wheel' or
|
|
# 'type=serial_msys').
|
|
#
|
|
# Examples:
|
|
# com1: enabled=1, mode=null
|
|
# com1: enabled=1, mode=mouse
|
|
# com2: enabled=1, mode=file, dev=serial.out
|
|
# com3: enabled=1, mode=raw, dev=com1
|
|
# com3: enabled=1, mode=socket-client, dev=localhost:8888
|
|
# com3: enabled=1, mode=socket-server, dev=localhost:8888
|
|
# com4: enabled=1, mode=pipe-client, dev=\\.\pipe\mypipe
|
|
# com4: enabled=1, mode=pipe-server, dev=\\.\pipe\mypipe
|
|
#=======================================================================
|
|
#com1: enabled=1, mode=term, dev=/dev/ttyp9
|
|
|
|
|
|
#=======================================================================
|
|
# PARPORT1, PARPORT2:
|
|
# This defines a parallel (printer) port. When turned on and an output file is
|
|
# defined the emulated printer port sends characters printed by the guest OS
|
|
# into the output file. On some platforms a device filename can be used to
|
|
# send the data to the real parallel port (e.g. "/dev/lp0" on Linux, "lpt1" on
|
|
# win32 platforms). The output file can be changed at runtime.
|
|
#
|
|
# Examples:
|
|
# parport1: enabled=1, file="parport.out"
|
|
# parport2: enabled=1, file="/dev/lp0"
|
|
# parport1: enabled=0
|
|
#=======================================================================
|
|
parport1: enabled=1, file="parport.out"
|
|
|
|
#=======================================================================
|
|
# SOUND:
|
|
# This defines the lowlevel sound driver(s) for the wave (PCM) input / output
|
|
# and the MIDI output feature and (if necessary) the devices to be used.
|
|
# It can have several of the following properties.
|
|
# All properties are in the format sound: property=value
|
|
#
|
|
# waveoutdrv:
|
|
# This defines the driver to be used for the waveout feature.
|
|
# Possible values are 'file' (all wave data sent to file), 'dummy' (no
|
|
# output) and the platform-dependant drivers 'alsa', 'oss', 'osx', 'sdl'
|
|
# and 'win'.
|
|
# waveout:
|
|
# This defines the device to be used for wave output (if necessary) or
|
|
# the output file for the 'file' driver.
|
|
# waveindrv:
|
|
# This defines the driver to be used for the wavein feature.
|
|
# Possible values are 'dummy' (recording silence) and platform-dependent
|
|
# drivers 'alsa', 'oss', 'sdl' and 'win'.
|
|
# wavein:
|
|
# This defines the device to be used for wave input (if necessary).
|
|
# midioutdrv:
|
|
# This defines the driver to be used for the MIDI output feature.
|
|
# Possible values are 'file' (all MIDI data sent to file), 'dummy' (no
|
|
# output) and platform-dependent drivers 'alsa', 'oss', 'osx' and 'win'.
|
|
# midiout:
|
|
# This defines the device to be used for MIDI output (if necessary).
|
|
# driver:
|
|
# This defines the driver to be used for all sound features with one
|
|
# property. Possible values are 'default' (platform default) and all
|
|
# other choices described above. Overriding one or more settings with
|
|
# the specific driver parameter is possible.
|
|
#
|
|
# Example for different drivers:
|
|
# sound: waveoutdrv=sdl, waveindrv=alsa, midioutdrv=dummy
|
|
#=======================================================================
|
|
sound: driver=default, waveout=/dev/dsp. wavein=, midiout=
|
|
|
|
#=======================================================================
|
|
# SPEAKER:
|
|
# This defines the PC speaker output mode. In the 'sound' mode the beep
|
|
# is generated by the square wave generator which is a part of the
|
|
# lowlevel sound support. The 'system' mode is only available on Linux
|
|
# and Windows. On Linux /dev/console is used for output and on Windows
|
|
# the Beep() function. The 'gui' mode forwards the beep to the related
|
|
# gui methods (currently only used by the Carbon gui).
|
|
#=======================================================================
|
|
speaker: enabled=1, mode=sound
|
|
|
|
#=======================================================================
|
|
# SB16:
|
|
# This defines the SB16 sound emulation. It can have several of the
|
|
# following properties.
|
|
# All properties are in the format sb16: property=value
|
|
#
|
|
# enabled:
|
|
# This optional property controls the presence of the SB16 emulation.
|
|
# The emulation is turned on unless this property is used and set to 0.
|
|
# midimode: This parameter specifies what to do with the MIDI output.
|
|
# 0 = no output
|
|
# 1 = output to device specified with the sound option (system dependent)
|
|
# 2 = MIDI or raw data output to file (depends on file name extension)
|
|
# 3 = dual output (mode 1 and 2 at the same time)
|
|
# midifile: This is the file where the midi output is stored (midimode 2 or 3).
|
|
# wavemode: This parameter specifies what to do with the PCM output.
|
|
# 0 = no output
|
|
# 1 = output to device specified with the sound option (system dependent)
|
|
# 2 = VOC, WAV or raw data output to file (depends on file name extension)
|
|
# 3 = dual output (mode 1 and 2 at the same time)
|
|
# wavefile: This is the file where the wave output is stored (wavemode 2 or 3).
|
|
# loglevel:
|
|
# 0=no log
|
|
# 1=resource changes, midi program and bank changes
|
|
# 2=severe errors
|
|
# 3=all errors
|
|
# 4=all errors plus all port accesses
|
|
# 5=all errors and port accesses plus a lot of extra info
|
|
# log: The file to write the sb16 emulator messages to.
|
|
# dmatimer:
|
|
# microseconds per second for a DMA cycle. Make it smaller to fix
|
|
# non-continuous sound. 750000 is usually a good value. This needs a
|
|
# reasonably correct setting for the IPS parameter of the CPU option.
|
|
#
|
|
# Examples for output modes:
|
|
# sb16: midimode=2, midifile="output.mid", wavemode=1 # MIDI to file
|
|
# sb16: midimode=1, wavemode=3, wavefile="output.wav" # wave to file and device
|
|
#=======================================================================
|
|
#sb16: midimode=1, wavemode=1, loglevel=2, log=sb16.log, dmatimer=600000
|
|
|
|
#=======================================================================
|
|
# ES1370:
|
|
# This defines the ES1370 sound emulation (recording and playback - except
|
|
# DAC1+DAC2 output at the same time). The parameter 'enabled' controls the
|
|
# presence of the device. The wave and MIDI output can be sent to device, file
|
|
# or both using the parameters 'wavemode', 'wavefile', 'midimode' and
|
|
# 'midifile'. See the description of these parameters at the SB16 directive.
|
|
#
|
|
# Examples:
|
|
# es1370: enabled=1, wavemode=1 # use 'sound' parameters
|
|
# es1370: enabled=1, wavemode=2, wavefile=output.voc # send output to file
|
|
#=======================================================================
|
|
#es1370: enabled=1, wavemode=1
|
|
|
|
#=======================================================================
|
|
# ne2k: NE2000 compatible ethernet adapter
|
|
#
|
|
# Format:
|
|
# ne2k: enabled=1, ioaddr=IOADDR, irq=IRQ, mac=MACADDR, ethmod=MODULE,
|
|
# ethdev=DEVICE, script=SCRIPT, bootrom=BOOTROM
|
|
#
|
|
# IOADDR, IRQ: You probably won't need to change ioaddr and irq, unless there
|
|
# are IRQ conflicts. These arguments are ignored when assign the ne2k to a
|
|
# PCI slot.
|
|
#
|
|
# MAC: The MAC address MUST NOT match the address of any machine on the net.
|
|
# Also, the first byte must be an even number (bit 0 set means a multicast
|
|
# address), and you cannot use ff:ff:ff:ff:ff:ff because that's the broadcast
|
|
# address. For the ethertap module, you must use fe:fd:00:00:00:01. There may
|
|
# be other restrictions too. To be safe, just use the b0:c4... address.
|
|
#
|
|
# ETHDEV: The ethdev value is the name of the network interface on your host
|
|
# platform. On UNIX machines, you can get the name by running ifconfig. On
|
|
# Windows machines, you must run niclist to get the name of the ethdev.
|
|
# Niclist source code is in misc/niclist.c and it is included in Windows
|
|
# binary releases.
|
|
# The 'socket' module uses this parameter to specify the UDP port for
|
|
# receiving packets and (optional) the host to connect.
|
|
#
|
|
# SCRIPT: The script value is optional, and is the name of a script that
|
|
# is executed after bochs initialize the network interface. You can use
|
|
# this script to configure this network interface, or enable masquerading.
|
|
# This is mainly useful for the tun/tap devices that only exist during
|
|
# Bochs execution. The network interface name is supplied to the script
|
|
# as first parameter.
|
|
# The 'slirp' module uses this parameter to specify a config file for
|
|
# setting up an alternative IP configuration or additional features.
|
|
# The 'vnet' module uses this parameter to specify an alternative
|
|
# log file name.
|
|
#
|
|
# BOOTROM: The bootrom value is optional, and is the name of the ROM image
|
|
# to load. Note that this feature is only implemented for the PCI version of
|
|
# the NE2000.
|
|
#
|
|
# If you don't want to make connections to any physical networks,
|
|
# you can use the following 'ethmod's to simulate a virtual network.
|
|
# null: All packets are discarded, but logged to a few files.
|
|
# vde: Virtual Distributed Ethernet
|
|
# vnet: ARP, ICMP-echo(ping), DHCP and read/write TFTP are simulated.
|
|
# The virtual host uses 192.168.10.1.
|
|
# DHCP assigns 192.168.10.2 to the guest.
|
|
# TFTP uses the 'ethdev' value for the root directory and doesn't
|
|
# overwrite files.
|
|
# socket: Connect up to 6 Bochs instances with external program 'bxhub'
|
|
# (simulating an ethernet hub). It provides the same services as the
|
|
# 'vnet' module and assigns IP addresses like 'slirp' (10.0.2.x).
|
|
#
|
|
#=======================================================================
|
|
# ne2k: ioaddr=0x300, irq=9, mac=fe:fd:00:00:00:01, ethmod=fbsd, ethdev=en0 #macosx
|
|
# ne2k: ioaddr=0x300, irq=9, mac=b0:c4:20:00:00:00, ethmod=fbsd, ethdev=xl0
|
|
# ne2k: ioaddr=0x300, irq=9, mac=b0:c4:20:00:00:00, ethmod=linux, ethdev=eth0
|
|
# ne2k: ioaddr=0x300, irq=9, mac=b0:c4:20:00:00:01, ethmod=win32, ethdev=MYCARD
|
|
# ne2k: ioaddr=0x300, irq=9, mac=fe:fd:00:00:00:01, ethmod=tap, ethdev=tap0
|
|
# ne2k: ioaddr=0x300, irq=9, mac=fe:fd:00:00:00:01, ethmod=tuntap, ethdev=/dev/net/tun0, script=./tunconfig
|
|
# ne2k: ioaddr=0x300, irq=9, mac=b0:c4:20:00:00:01, ethmod=null, ethdev=eth0
|
|
# ne2k: ioaddr=0x300, irq=9, mac=b0:c4:20:00:00:01, ethmod=vde, ethdev="/tmp/vde.ctl"
|
|
# ne2k: ioaddr=0x300, irq=9, mac=b0:c4:20:00:00:01, ethmod=vnet, ethdev="c:/temp"
|
|
# ne2k: mac=b0:c4:20:00:00:01, ethmod=socket, ethdev=40000 # use localhost
|
|
# ne2k: mac=b0:c4:20:00:00:01, ethmod=socket, ethdev=mymachine:40000
|
|
# ne2k: mac=b0:c4:20:00:00:01, ethmod=slirp, script=slirp.conf, bootrom=ne2k_pci.rom
|
|
|
|
#=======================================================================
|
|
# pcipnic: Bochs/Etherboot pseudo-NIC
|
|
#
|
|
# Format:
|
|
# pcipnic: enabled=1, mac=MACADDR, ethmod=MODULE, ethdev=DEVICE, script=SCRIPT,
|
|
# bootrom=BOOTROM
|
|
#
|
|
# The pseudo-NIC accepts the same syntax (for mac, ethmod, ethdev, script,
|
|
# bootrom) and supports the same networking modules as the NE2000 adapter.
|
|
#=======================================================================
|
|
#pcipnic: enabled=1, mac=b0:c4:20:00:00:00, ethmod=vnet
|
|
|
|
#=======================================================================
|
|
# e1000: Intel(R) 82540EM Gigabit Ethernet adapter
|
|
#
|
|
# Format:
|
|
# e1000: enabled=1, mac=MACADDR, ethmod=MODULE, ethdev=DEVICE, script=SCRIPT
|
|
# bootrom=BOOTROM
|
|
#
|
|
# The E1000 accepts the same syntax (for mac, ethmod, ethdev, script, bootrom)
|
|
# and supports the same networking modules as the NE2000 adapter.
|
|
#=======================================================================
|
|
#e1000: enabled=1, mac=52:54:00:12:34:56, ethmod=slirp, script=slirp.conf
|
|
|
|
#=======================================================================
|
|
# USB_UHCI:
|
|
# This option controls the presence of the USB root hub which is a part
|
|
# of the i440FX PCI chipset. With the portX parameter you can connect devices
|
|
# to the hub (currently supported: 'mouse', 'tablet', 'keypad', 'disk', 'cdrom',
|
|
# 'floppy', 'hub' and 'printer').
|
|
#
|
|
# If you connect the mouse or tablet to one of the ports, Bochs forwards the
|
|
# mouse movement data to the USB device instead of the selected mouse type.
|
|
# When connecting the keypad to one of the ports, Bochs forwards the input of
|
|
# the numeric keypad to the USB device instead of the PS/2 keyboard.
|
|
#
|
|
# To connect a 'flat' mode image as a USB hardisk you can use the 'disk' device
|
|
# with the path to the image separated with a colon. To use other disk image modes
|
|
# similar to ATA disks the syntax 'disk:mode:filename' must be used (see below).
|
|
#
|
|
# To emulate a USB cdrom you can use the 'cdrom' device name and the path to
|
|
# an ISO image or raw device name also separated with a colon. An option to
|
|
# insert/eject media is available in the runtime configuration.
|
|
#
|
|
# To emulate a USB floppy you can use the 'floppy' device with the path to the
|
|
# image separated with a colon. To use the VVFAT image mode similar to the
|
|
# legacy floppy the syntax 'floppy:vvfat:directory' must be used (see below).
|
|
# An option to insert/eject media is available in the runtime configuration.
|
|
#
|
|
# The device name 'hub' connects an external hub with max. 8 ports (default: 4)
|
|
# to the root hub. To specify the number of ports you have to add the value
|
|
# separated with a colon. Connecting devices to the external hub ports is only
|
|
# available in the runtime configuration.
|
|
#
|
|
# The device 'printer' emulates the HP Deskjet 920C printer. The PCL data is
|
|
# sent to a file specified in bochsrc.txt. The current code appends the PCL
|
|
# code to the file if the file already existed. The output file can be
|
|
# changed at runtime.
|
|
#
|
|
# The optionsX parameter can be used to assign specific options to the device
|
|
# connected to the corresponding USB port. Currently this feature is used to
|
|
# set the speed reported by device ('low', 'full', 'high' or 'super'). The
|
|
# availabe speed choices depend on both HC and device. The option 'debug' turns
|
|
# on debug output for the device at connection time.
|
|
# For the USB 'disk' device the optionsX parameter can be used to specify an
|
|
# alternative redolog file (journal) of some image modes. For 'vvfat' mode USB
|
|
# disks the optionsX parameter can be used to specify the disk size (range
|
|
# 128M ... 128G). If the size is not specified, it defaults to 504M.
|
|
# For the USB 'floppy' device the optionsX parameter can be used to specify an
|
|
# alternative device ID to be reported. Currently only the model "teac" is
|
|
# supported (can fix hw detection in some guest OS). The USB floppy also
|
|
# accepts the parameter "write_protected" with valid values 0 and 1 to select
|
|
# the access mode (default is 0).
|
|
#=======================================================================
|
|
#usb_uhci: enabled=1
|
|
#usb_uhci: enabled=1, port1=mouse, port2=disk:usbstick.img
|
|
#usb_uhci: enabled=1, port1=hub:7, port2=disk:growing:usbdisk.img
|
|
#usb_uhci: enabled=1, port2=disk:undoable:usbdisk.img, options2=journal:redo.log
|
|
#usb_uhci: enabled=1, port2=disk:vvfat:vvfat, options2="debug,speed:full"
|
|
#usb_uhci: enabled=1, port1=printer:printdata.bin, port2=cdrom:image.iso
|
|
#usb_uhci: enabled=1, port2=floppy:vvfat:diskette, options2="model:teac"
|
|
|
|
#=======================================================================
|
|
# USB_OHCI:
|
|
# This option controls the presence of the USB OHCI host controller with a
|
|
# 2-port hub. The portX parameter accepts the same device types with the same
|
|
# syntax as the UHCI controller (see above). The optionsX parameter is also
|
|
# available on OHCI.
|
|
#=======================================================================
|
|
#usb_ohci: enabled=1
|
|
#usb_ohci: enabled=1, port1=printer:usbprinter.bin
|
|
|
|
#=======================================================================
|
|
# USB_EHCI:
|
|
# This option controls the presence of the USB EHCI host controller with a
|
|
# 6-port hub. The portX parameter accepts the same device types with the
|
|
# same syntax as the UHCI controller (see above). The optionsX parameter is
|
|
# also available on EHCI.
|
|
#=======================================================================
|
|
#usb_ehci: enabled=1
|
|
|
|
#=======================================================================
|
|
# USB_XHCI:
|
|
# This option controls the presence of the USB xHCI host controller with a
|
|
# 4-port hub. The portX parameter accepts the same device types with the
|
|
# same syntax as the UHCI controller (see above). The optionsX parameter is
|
|
# also available on xHCI. NOTE: port 1 and 2 are USB3 and only support
|
|
# super-speed devices, but port 3 and 4 are USB2 and support speed settings
|
|
# low, full and high.
|
|
#=======================================================================
|
|
#usb_xhci: enabled=1
|
|
|
|
#=======================================================================
|
|
# PCIDEV:
|
|
# PCI host device mapping
|
|
# WARNING: This Bochs feature is not maintained yet and may fail.
|
|
#=======================================================================
|
|
#pcidev: vendor=0x1234, device=0x5678
|
|
|
|
#=======================================================================
|
|
# GDBSTUB:
|
|
# Enable GDB stub. See user documentation for details.
|
|
# Default value is enabled=0.
|
|
# WARNING: This Bochs feature is not maintained yet and may fail.
|
|
#=======================================================================
|
|
#gdbstub: enabled=0, port=1234, text_base=0, data_base=0, bss_base=0
|
|
|
|
#=======================================================================
|
|
# MAGIC_BREAK:
|
|
# This enables the "magic breakpoint" feature when using the debugger.
|
|
# The useless cpu instruction XCHG BX, BX causes Bochs to enter the
|
|
# debugger mode. This might be useful for software development.
|
|
#
|
|
# Example:
|
|
# magic_break: enabled=1
|
|
#=======================================================================
|
|
#magic_break: enabled=1
|
|
|
|
#=======================================================================
|
|
# DEBUG_SYMBOLS:
|
|
# This loads symbols from the specified file for use in Bochs' internal
|
|
# debugger. Symbols are loaded into global context. This is equivalent to
|
|
# issuing ldsym debugger command at start up.
|
|
#
|
|
# Example:
|
|
# debug_symbols: file="kernel.sym"
|
|
# debug_symbols: file="kernel.sym", offset=0x80000000
|
|
#=======================================================================
|
|
#debug_symbols: file="kernel.sym"
|
|
|
|
#print_timestamps: enabled=1
|
|
|
|
#=======================================================================
|
|
# PORT_E9_HACK:
|
|
# The 0xE9 port doesn't exists in normal ISA architecture. However, we
|
|
# define a convention here, to display on the console of the system running
|
|
# Bochs anything that is written to it. The idea is to provide debug output
|
|
# very early when writing BIOS or OS code for example, without having to
|
|
# bother with setting up a serial port or etc. Reading from port 0xE9 will
|
|
# will return 0xe9 to let you know if the feature is available.
|
|
# Leave this 0 unless you have a reason to use it.
|
|
#
|
|
# Example:
|
|
# port_e9_hack: enabled=1
|
|
#=======================================================================
|
|
#port_e9_hack: enabled=1
|
|
|
|
#=======================================================================
|
|
# other stuff
|
|
#=======================================================================
|
|
# WARNING: This Bochs feature is not maintained yet. Is it still used ?
|
|
# To use it, set BX_LOAD32BITOSHACK in config.h to 1 and recompile Bochs.
|
|
#load32bitOSImage: os=nullkernel, path=../kernel.img, iolog=../vga_io.log
|
|
#load32bitOSImage: os=linux, path=../linux.img, iolog=../vga_io.log, initrd=../initrd.img
|
|
|
|
#=======================================================================
|
|
# fullscreen: ONLY IMPLEMENTED ON AMIGA
|
|
# Request that Bochs occupy the entire screen instead of a
|
|
# window.
|
|
#
|
|
# Examples:
|
|
# fullscreen: enabled=0
|
|
# fullscreen: enabled=1
|
|
#=======================================================================
|
|
#fullscreen: enabled=0
|
|
#screenmode: name="sample"
|
|
|
|
#=======================================================================
|
|
# USER_PLUGIN:
|
|
# Load user-defined plugin. This option is available only if Bochs is
|
|
# compiled with plugin support. Maximum 8 different plugins are supported.
|
|
# See the example in the Bochs sources how to write a plugin device.
|
|
#=======================================================================
|
|
#user_plugin: name=testdev
|
|
|
|
#=======================================================================
|
|
# for Macintosh, use the style of pathnames in the following
|
|
# examples.
|
|
#
|
|
# vgaromimage: :bios:VGABIOS-elpin-2.40
|
|
# romimage: file=:bios:BIOS-bochs-latest, address=0xf0000
|
|
# floppya: 1_44=[fd:], status=inserted
|
|
#=======================================================================
|
|
|
|
#=======================================================================
|
|
# MEGS
|
|
# Set the number of Megabytes of physical memory you want to emulate.
|
|
# The default is 32MB, most OS's won't need more than that.
|
|
# The maximum amount of memory supported is 2048Mb.
|
|
# The 'MEGS' option is deprecated. Use 'MEMORY' option instead.
|
|
#=======================================================================
|
|
#megs: 256
|
|
#megs: 128
|
|
#megs: 64
|
|
#megs: 32
|
|
#megs: 16
|
|
#megs: 8
|